HID: i2c-hid: add DT bindings
Add device tree based support for HID over I2C devices. Tested on an Odroid-X board with a Synaptics touchpad. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
parent
3366dd9fa8
commit
3d7d248cf4
28
Documentation/devicetree/bindings/hid/hid-over-i2c.txt
Normal file
28
Documentation/devicetree/bindings/hid/hid-over-i2c.txt
Normal file
|
@ -0,0 +1,28 @@
|
||||||
|
* HID over I2C Device-Tree bindings
|
||||||
|
|
||||||
|
HID over I2C provides support for various Human Interface Devices over the
|
||||||
|
I2C bus. These devices can be for example touchpads, keyboards, touch screens
|
||||||
|
or sensors.
|
||||||
|
|
||||||
|
The specification has been written by Microsoft and is currently available here:
|
||||||
|
http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
|
||||||
|
|
||||||
|
If this binding is used, the kernel module i2c-hid will handle the communication
|
||||||
|
with the device and the generic hid core layer will handle the protocol.
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible: must be "hid-over-i2c"
|
||||||
|
- reg: i2c slave address
|
||||||
|
- hid-descr-addr: HID descriptor address
|
||||||
|
- interrupt-parent: the phandle for the interrupt controller
|
||||||
|
- interrupts: interrupt line
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
i2c-hid-dev@2c {
|
||||||
|
compatible = "hid-over-i2c";
|
||||||
|
reg = <0x2c>;
|
||||||
|
hid-descr-addr = <0x0020>;
|
||||||
|
interrupt-parent = <&gpx3>;
|
||||||
|
interrupts = <3 2>;
|
||||||
|
};
|
|
@ -35,6 +35,7 @@
|
||||||
#include <linux/hid.h>
|
#include <linux/hid.h>
|
||||||
#include <linux/mutex.h>
|
#include <linux/mutex.h>
|
||||||
#include <linux/acpi.h>
|
#include <linux/acpi.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
|
||||||
#include <linux/i2c/i2c-hid.h>
|
#include <linux/i2c/i2c-hid.h>
|
||||||
|
|
||||||
|
@ -933,6 +934,42 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_OF
|
||||||
|
static int i2c_hid_of_probe(struct i2c_client *client,
|
||||||
|
struct i2c_hid_platform_data *pdata)
|
||||||
|
{
|
||||||
|
struct device *dev = &client->dev;
|
||||||
|
u32 val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(&client->dev, "HID register address not provided\n");
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
if (val >> 16) {
|
||||||
|
dev_err(&client->dev, "Bad HID register address: 0x%08x\n",
|
||||||
|
val);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
pdata->hid_descriptor_address = val;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct of_device_id i2c_hid_of_match[] = {
|
||||||
|
{ .compatible = "hid-over-i2c" },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
|
||||||
|
#else
|
||||||
|
static inline int i2c_hid_of_probe(struct i2c_client *client,
|
||||||
|
struct i2c_hid_platform_data *pdata)
|
||||||
|
{
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
static int i2c_hid_probe(struct i2c_client *client,
|
static int i2c_hid_probe(struct i2c_client *client,
|
||||||
const struct i2c_device_id *dev_id)
|
const struct i2c_device_id *dev_id)
|
||||||
{
|
{
|
||||||
|
@ -954,7 +991,11 @@ static int i2c_hid_probe(struct i2c_client *client,
|
||||||
if (!ihid)
|
if (!ihid)
|
||||||
return -ENOMEM;
|
return -ENOMEM;
|
||||||
|
|
||||||
if (!platform_data) {
|
if (client->dev.of_node) {
|
||||||
|
ret = i2c_hid_of_probe(client, &ihid->pdata);
|
||||||
|
if (ret)
|
||||||
|
goto err;
|
||||||
|
} else if (!platform_data) {
|
||||||
ret = i2c_hid_acpi_pdata(client, &ihid->pdata);
|
ret = i2c_hid_acpi_pdata(client, &ihid->pdata);
|
||||||
if (ret) {
|
if (ret) {
|
||||||
dev_err(&client->dev,
|
dev_err(&client->dev,
|
||||||
|
@ -1095,6 +1136,7 @@ static struct i2c_driver i2c_hid_driver = {
|
||||||
.owner = THIS_MODULE,
|
.owner = THIS_MODULE,
|
||||||
.pm = &i2c_hid_pm,
|
.pm = &i2c_hid_pm,
|
||||||
.acpi_match_table = ACPI_PTR(i2c_hid_acpi_match),
|
.acpi_match_table = ACPI_PTR(i2c_hid_acpi_match),
|
||||||
|
.of_match_table = of_match_ptr(i2c_hid_of_match),
|
||||||
},
|
},
|
||||||
|
|
||||||
.probe = i2c_hid_probe,
|
.probe = i2c_hid_probe,
|
||||||
|
|
|
@ -19,7 +19,8 @@
|
||||||
* @hid_descriptor_address: i2c register where the HID descriptor is stored.
|
* @hid_descriptor_address: i2c register where the HID descriptor is stored.
|
||||||
*
|
*
|
||||||
* Note that it is the responsibility of the platform driver (or the acpi 5.0
|
* Note that it is the responsibility of the platform driver (or the acpi 5.0
|
||||||
* driver) to setup the irq related to the gpio in the struct i2c_board_info.
|
* driver, or the flattened device tree) to setup the irq related to the gpio in
|
||||||
|
* the struct i2c_board_info.
|
||||||
* The platform driver should also setup the gpio according to the device:
|
* The platform driver should also setup the gpio according to the device:
|
||||||
*
|
*
|
||||||
* A typical example is the following:
|
* A typical example is the following:
|
||||||
|
|
Loading…
Reference in a new issue