i2c: Support for Netlogic XLR/XLS I2C controller.
Add support for the intergrated I2C controller on Netlogic XLR/XLS MIPS SoC. The changes are to add a new file i2c/buses/i2c-xlr.c, containing the i2c bus implementation, and to update i2c/buses/{Kconfig,Makefile} to add the CONFIG_I2C_XLR option. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
This commit is contained in:
parent
3f0e1e4bb6
commit
401c3434c4
|
@ -681,6 +681,16 @@ config I2C_XILINX
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called xilinx_i2c.
|
||||
|
||||
config I2C_XLR
|
||||
tristate "XLR I2C support"
|
||||
depends on CPU_XLR
|
||||
help
|
||||
This driver enables support for the on-chip I2C interface of
|
||||
the Netlogic XLR/XLS MIPS processors.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-xlr.
|
||||
|
||||
config I2C_EG20T
|
||||
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
|
||||
depends on PCI
|
||||
|
|
|
@ -68,6 +68,7 @@ obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
|
|||
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
|
||||
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
|
||||
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
|
||||
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
|
||||
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
|
||||
|
||||
# External I2C/SMBus adapter drivers
|
||||
|
|
278
drivers/i2c/busses/i2c-xlr.c
Normal file
278
drivers/i2c/busses/i2c-xlr.c
Normal file
|
@ -0,0 +1,278 @@
|
|||
/*
|
||||
* Copyright 2011, Netlogic Microsystems Inc.
|
||||
* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
/* XLR I2C REGISTERS */
|
||||
#define XLR_I2C_CFG 0x00
|
||||
#define XLR_I2C_CLKDIV 0x01
|
||||
#define XLR_I2C_DEVADDR 0x02
|
||||
#define XLR_I2C_ADDR 0x03
|
||||
#define XLR_I2C_DATAOUT 0x04
|
||||
#define XLR_I2C_DATAIN 0x05
|
||||
#define XLR_I2C_STATUS 0x06
|
||||
#define XLR_I2C_STARTXFR 0x07
|
||||
#define XLR_I2C_BYTECNT 0x08
|
||||
#define XLR_I2C_HDSTATIM 0x09
|
||||
|
||||
/* XLR I2C REGISTERS FLAGS */
|
||||
#define XLR_I2C_BUS_BUSY 0x01
|
||||
#define XLR_I2C_SDOEMPTY 0x02
|
||||
#define XLR_I2C_RXRDY 0x04
|
||||
#define XLR_I2C_ACK_ERR 0x08
|
||||
#define XLR_I2C_ARB_STARTERR 0x30
|
||||
|
||||
/* Register Values */
|
||||
#define XLR_I2C_CFG_ADDR 0xF8
|
||||
#define XLR_I2C_CFG_NOADDR 0xFA
|
||||
#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */
|
||||
#define XLR_I2C_STARTXFR_RD 0x01 /* Read */
|
||||
#define XLR_I2C_STARTXFR_WR 0x00 /* Write */
|
||||
|
||||
#define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */
|
||||
|
||||
/*
|
||||
* On XLR/XLS, we need to use __raw_ IO to read the I2C registers
|
||||
* because they are in the big-endian MMIO area on the SoC.
|
||||
*
|
||||
* The readl/writel implementation on XLR/XLS byteswaps, because
|
||||
* those are for its little-endian PCI space (see arch/mips/Kconfig).
|
||||
*/
|
||||
static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val)
|
||||
{
|
||||
__raw_writel(val, base + reg);
|
||||
}
|
||||
|
||||
static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg)
|
||||
{
|
||||
return __raw_readl(base + reg);
|
||||
}
|
||||
|
||||
struct xlr_i2c_private {
|
||||
struct i2c_adapter adap;
|
||||
u32 __iomem *iobase;
|
||||
};
|
||||
|
||||
static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len,
|
||||
u8 *buf, u16 addr)
|
||||
{
|
||||
struct i2c_adapter *adap = &priv->adap;
|
||||
unsigned long timeout, stoptime, checktime;
|
||||
u32 i2c_status;
|
||||
int pos, timedout;
|
||||
u8 offset, byte;
|
||||
|
||||
offset = buf[0];
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset);
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_ADDR);
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
|
||||
|
||||
timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
|
||||
stoptime = jiffies + timeout;
|
||||
timedout = 0;
|
||||
pos = 1;
|
||||
retry:
|
||||
if (len == 1) {
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR,
|
||||
XLR_I2C_STARTXFR_ND);
|
||||
} else {
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos]);
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR,
|
||||
XLR_I2C_STARTXFR_WR);
|
||||
}
|
||||
|
||||
while (!timedout) {
|
||||
checktime = jiffies;
|
||||
i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
||||
|
||||
if (i2c_status & XLR_I2C_SDOEMPTY) {
|
||||
pos++;
|
||||
/* need to do a empty dataout after the last byte */
|
||||
byte = (pos < len) ? buf[pos] : 0;
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, byte);
|
||||
|
||||
/* reset timeout on successful xmit */
|
||||
stoptime = jiffies + timeout;
|
||||
}
|
||||
timedout = time_after(checktime, stoptime);
|
||||
|
||||
if (i2c_status & XLR_I2C_ARB_STARTERR) {
|
||||
if (timedout)
|
||||
break;
|
||||
goto retry;
|
||||
}
|
||||
|
||||
if (i2c_status & XLR_I2C_ACK_ERR)
|
||||
return -EIO;
|
||||
|
||||
if ((i2c_status & XLR_I2C_BUS_BUSY) == 0 && pos >= len)
|
||||
return 0;
|
||||
}
|
||||
dev_err(&adap->dev, "I2C transmit timeout\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr)
|
||||
{
|
||||
struct i2c_adapter *adap = &priv->adap;
|
||||
u32 i2c_status;
|
||||
unsigned long timeout, stoptime, checktime;
|
||||
int nbytes, timedout;
|
||||
u8 byte;
|
||||
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR);
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len);
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
|
||||
|
||||
timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
|
||||
stoptime = jiffies + timeout;
|
||||
timedout = 0;
|
||||
nbytes = 0;
|
||||
retry:
|
||||
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD);
|
||||
|
||||
while (!timedout) {
|
||||
checktime = jiffies;
|
||||
i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
||||
if (i2c_status & XLR_I2C_RXRDY) {
|
||||
if (nbytes > len)
|
||||
return -EIO; /* should not happen */
|
||||
|
||||
/* we need to do a dummy datain when nbytes == len */
|
||||
byte = xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN);
|
||||
if (nbytes < len)
|
||||
buf[nbytes] = byte;
|
||||
nbytes++;
|
||||
|
||||
/* reset timeout on successful read */
|
||||
stoptime = jiffies + timeout;
|
||||
}
|
||||
|
||||
timedout = time_after(checktime, stoptime);
|
||||
if (i2c_status & XLR_I2C_ARB_STARTERR) {
|
||||
if (timedout)
|
||||
break;
|
||||
goto retry;
|
||||
}
|
||||
|
||||
if (i2c_status & XLR_I2C_ACK_ERR)
|
||||
return -EIO;
|
||||
|
||||
if ((i2c_status & XLR_I2C_BUS_BUSY) == 0)
|
||||
return 0;
|
||||
}
|
||||
|
||||
dev_err(&adap->dev, "I2C receive timeout\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int xlr_i2c_xfer(struct i2c_adapter *adap,
|
||||
struct i2c_msg *msgs, int num)
|
||||
{
|
||||
struct i2c_msg *msg;
|
||||
int i;
|
||||
int ret = 0;
|
||||
struct xlr_i2c_private *priv = i2c_get_adapdata(adap);
|
||||
|
||||
for (i = 0; ret == 0 && i < num; i++) {
|
||||
msg = &msgs[i];
|
||||
if (msg->flags & I2C_M_RD)
|
||||
ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0],
|
||||
msg->addr);
|
||||
else
|
||||
ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0],
|
||||
msg->addr);
|
||||
}
|
||||
|
||||
return (ret != 0) ? ret : num;
|
||||
}
|
||||
|
||||
static u32 xlr_func(struct i2c_adapter *adap)
|
||||
{
|
||||
/* Emulate SMBUS over I2C */
|
||||
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
|
||||
}
|
||||
|
||||
static struct i2c_algorithm xlr_i2c_algo = {
|
||||
.master_xfer = xlr_i2c_xfer,
|
||||
.functionality = xlr_func,
|
||||
};
|
||||
|
||||
static int __devinit xlr_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct xlr_i2c_private *priv;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
priv->iobase = devm_request_and_ioremap(&pdev->dev, res);
|
||||
if (!priv->iobase) {
|
||||
dev_err(&pdev->dev, "devm_request_and_ioremap failed\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
priv->adap.dev.parent = &pdev->dev;
|
||||
priv->adap.owner = THIS_MODULE;
|
||||
priv->adap.algo_data = priv;
|
||||
priv->adap.algo = &xlr_i2c_algo;
|
||||
priv->adap.nr = pdev->id;
|
||||
priv->adap.class = I2C_CLASS_HWMON;
|
||||
snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c");
|
||||
|
||||
i2c_set_adapdata(&priv->adap, priv);
|
||||
ret = i2c_add_numbered_adapter(&priv->adap);
|
||||
if (ret < 0) {
|
||||
dev_err(&priv->adap.dev, "Failed to add i2c bus.\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, priv);
|
||||
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devexit xlr_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct xlr_i2c_private *priv;
|
||||
|
||||
priv = platform_get_drvdata(pdev);
|
||||
i2c_del_adapter(&priv->adap);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver xlr_i2c_driver = {
|
||||
.probe = xlr_i2c_probe,
|
||||
.remove = __devexit_p(xlr_i2c_remove),
|
||||
.driver = {
|
||||
.name = "xlr-i2cbus",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(xlr_i2c_driver);
|
||||
|
||||
MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>");
|
||||
MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:xlr-i2cbus");
|
Loading…
Reference in a new issue