Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
2016-05-28 16:41:39 -07:00 · 2016-05-28 16:41:39 -07:00 · 4029632c34
parent d66492bce1 a8c5ddf08f
commit 4029632c34
67 changed files with 376 additions and 261 deletions
--- a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
@ -33,7 +33,7 @@ gpio0: gpio0@1f860000 {
 	gpio-controller;
 	interrupt-controller;
 	#interrupt-cells = <2>;
-	clocks = <&PBCLK4>;
+	clocks = <&rootclk PB4CLK>;
 	microchip,gpio-bank = <0>;
 	gpio-ranges = <&pic32_pinctrl 0 0 16>;
 };
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@ -13,7 +13,7 @@ Required properties:
 - compatible : Should be "mti,cpu-interrupt-controller"

 Example devicetree:
-	cpu-irq: cpu-irq@0 {
+	cpu-irq: cpu-irq {
 		#address-cells = <0>;

 		interrupt-controller;
--- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@ -20,7 +20,7 @@ Example:
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&REFCLKO4>, <&PBCLK5>;
+		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
 		clock-names = "base_clk", "sys_clk";
 		bus-width = <4>;
 		cap-sd-highspeed;
--- a/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
@ -34,7 +34,7 @@ pic32_pinctrl: pinctrl@1f801400{
 	#size-cells = <1>;
 	compatible = "microchip,pic32mzda-pinctrl";
 	reg = <0x1f801400 0x400>;
-	clocks = <&PBCLK1>;
+	clocks = <&rootclk PB1CLK>;

 	pinctrl_uart2: pinctrl_uart2 {
 		uart2-tx {
--- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@ -20,7 +20,7 @@ Example:
 		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
 			<113 IRQ_TYPE_LEVEL_HIGH>,
 			<114 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_uart1
 				&pinctrl_uart1_cts
--- a/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
@ -8,12 +8,12 @@ Required properties:
 - compatible: must be "microchip,pic32mzda-dmt".
 - reg: physical base address of the controller and length of memory mapped
  region.
- clocks: phandle of parent clock (should be &PBCLK7).
+- clocks: phandle of source clk. Should be <&rootclk PB7CLK>.

 Example:

 	watchdog@1f800a00 {
 		compatible = "microchip,pic32mzda-dmt";
 		reg = <0x1f800a00 0x80>;
-		clocks = <&PBCLK7>;
+		clocks = <&rootclk PB7CLK>;
 	};
--- a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
@ -7,12 +7,12 @@ Required properties:
 - compatible: must be "microchip,pic32mzda-wdt".
 - reg: physical base address of the controller and length of memory mapped
  region.
- clocks: phandle of source clk. should be <&LPRC> clk.
+- clocks: phandle of source clk. Should be <&rootclk LPRCCLK>.

 Example:

 	watchdog@1f800800 {
 		compatible = "microchip,pic32mzda-wdt";
 		reg = <0x1f800800 0x200>;
-		clocks = <&LPRC>;
+		clocks = <&rootclk LPRCCLK>;
 	};
--- a/2
+++ b/2
@ -2505,6 +2505,7 @@ M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
 L:	linux-mips@linux-mips.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/mips/brcm/
 F:	arch/mips/bcm47xx/*
 F:	arch/mips/include/asm/mach-bcm47xx/*

@ -7521,6 +7522,7 @@ W:	http://www.linux-mips.org/
 T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
+F:	Documentation/devicetree/bindings/mips/
 F:	Documentation/mips/
 F:	arch/mips/

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -398,6 +398,7 @@ config MACH_PISTACHIO
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_RELOCATABLE
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@ -5,7 +5,7 @@
 	#size-cells = <1>;
 	compatible = "ingenic,jz4740";

-	cpuintc: interrupt-controller@0 {
+	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
--- a/arch/mips/boot/dts/ralink/mt7620a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi
@ -9,7 +9,7 @@
 		};
 	};

-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
--- a/arch/mips/boot/dts/ralink/rt2880.dtsi
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@ -9,7 +9,7 @@
 		};
 	};

-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
--- a/arch/mips/boot/dts/ralink/rt3050.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3050.dtsi
@ -9,7 +9,7 @@
 		};
 	};

-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
--- a/arch/mips/boot/dts/ralink/rt3883.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3883.dtsi
@ -9,7 +9,7 @@
 		};
 	};

-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
--- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@ -10,7 +10,7 @@
 		reg = <0x0 0x08000000>;
 	};

-	cpuintc: interrupt-controller@0 {
+	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@ -384,7 +384,7 @@ static int octeon_cpu_callback(struct notifier_block *nfb,
 {
 	unsigned int cpu = (unsigned long)hcpu;

-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_UP_PREPARE:
 		octeon_update_boot_vector(cpu);
 		break;
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@ -19,6 +19,28 @@
 #include <asm/asmmacro-64.h>
 #endif

+/*
+ * Helper macros for generating raw instruction encodings.
+ */
+#ifdef CONFIG_CPU_MICROMIPS
+	.macro	insn32_if_mm enc
+	.insn
+	.hword ((\enc) >> 16)
+	.hword ((\enc) & 0xffff)
+	.endm
+
+	.macro	insn_if_mips enc
+	.endm
+#else
+	.macro	insn32_if_mm enc
+	.endm
+
+	.macro	insn_if_mips enc
+	.insn
+	.word (\enc)
+	.endm
+#endif
+
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	.macro	local_irq_enable reg=t0
 	ei
@ -341,38 +363,6 @@
 	.endm
 #else

-#ifdef CONFIG_CPU_MICROMIPS
-#define CFC_MSA_INSN		0x587e0056
-#define CTC_MSA_INSN		0x583e0816
-#define LDB_MSA_INSN		0x58000807
-#define LDH_MSA_INSN		0x58000817
-#define LDW_MSA_INSN		0x58000827
-#define LDD_MSA_INSN		0x58000837
-#define STB_MSA_INSN		0x5800080f
-#define STH_MSA_INSN		0x5800081f
-#define STW_MSA_INSN		0x5800082f
-#define STD_MSA_INSN		0x5800083f
-#define COPY_SW_MSA_INSN	0x58b00056
-#define COPY_SD_MSA_INSN	0x58b80056
-#define INSERT_W_MSA_INSN	0x59300816
-#define INSERT_D_MSA_INSN	0x59380816
-#else
-#define CFC_MSA_INSN		0x787e0059
-#define CTC_MSA_INSN		0x783e0819
-#define LDB_MSA_INSN		0x78000820
-#define LDH_MSA_INSN		0x78000821
-#define LDW_MSA_INSN		0x78000822
-#define LDD_MSA_INSN		0x78000823
-#define STB_MSA_INSN		0x78000824
-#define STH_MSA_INSN		0x78000825
-#define STW_MSA_INSN		0x78000826
-#define STD_MSA_INSN		0x78000827
-#define COPY_SW_MSA_INSN	0x78b00059
-#define COPY_SD_MSA_INSN	0x78b80059
-#define INSERT_W_MSA_INSN	0x79300819
-#define INSERT_D_MSA_INSN	0x79380819
-#endif
-
 	/*
 	 * Temporary until all toolchains in use include MSA support.
 	 */
@ -380,8 +370,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.insn
-	.word	CFC_MSA_INSN | (\cs << 11)
+	insn_if_mips 0x787e0059 | (\cs << 11)
+	insn32_if_mm 0x587e0056 | (\cs << 11)
 	move	\rd, $1
 	.set	pop
 	.endm
@ -391,7 +381,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	move	$1, \rs
-	.word	CTC_MSA_INSN | (\cd << 6)
+	insn_if_mips 0x783e0819 | (\cd << 6)
+	insn32_if_mm 0x583e0816 | (\cd << 6)
 	.set	pop
 	.endm

@ -400,7 +391,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDB_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000820 | (\wd << 6)
+	insn32_if_mm 0x58000807 | (\wd << 6)
 	.set	pop
 	.endm

@ -409,7 +401,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDH_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000821 | (\wd << 6)
+	insn32_if_mm 0x58000817 | (\wd << 6)
 	.set	pop
 	.endm

@ -418,7 +411,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDW_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000822 | (\wd << 6)
+	insn32_if_mm 0x58000827 | (\wd << 6)
 	.set	pop
 	.endm

@ -427,7 +421,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	LDD_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000823 | (\wd << 6)
+	insn32_if_mm 0x58000837 | (\wd << 6)
 	.set	pop
 	.endm

@ -436,7 +431,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STB_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000824 | (\wd << 6)
+	insn32_if_mm 0x5800080f | (\wd << 6)
 	.set	pop
 	.endm

@ -445,7 +441,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STH_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000825 | (\wd << 6)
+	insn32_if_mm 0x5800081f | (\wd << 6)
 	.set	pop
 	.endm

@ -454,7 +451,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STW_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000826 | (\wd << 6)
+	insn32_if_mm 0x5800082f | (\wd << 6)
 	.set	pop
 	.endm

@ -463,7 +461,8 @@
 	.set	noat
 	SET_HARDFLOAT
 	PTR_ADDU $1, \base, \off
-	.word	STD_MSA_INSN | (\wd << 6)
+	insn_if_mips 0x78000827 | (\wd << 6)
+	insn32_if_mm 0x5800083f | (\wd << 6)
 	.set	pop
 	.endm

@ -471,8 +470,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.insn
-	.word	COPY_SW_MSA_INSN | (\n << 16) | (\ws << 11)
+	insn_if_mips 0x78b00059 | (\n << 16) | (\ws << 11)
+	insn32_if_mm 0x58b00056 | (\n << 16) | (\ws << 11)
 	.set	pop
 	.endm

@ -480,8 +479,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.insn
-	.word	COPY_SD_MSA_INSN | (\n << 16) | (\ws << 11)
+	insn_if_mips 0x78b80059 | (\n << 16) | (\ws << 11)
+	insn32_if_mm 0x58b80056 | (\n << 16) | (\ws << 11)
 	.set	pop
 	.endm

@ -489,7 +488,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.word	INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
+	insn_if_mips 0x79300819 | (\n << 16) | (\wd << 6)
+	insn32_if_mm 0x59300816 | (\n << 16) | (\wd << 6)
 	.set	pop
 	.endm

@ -497,7 +497,8 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	.word	INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
+	insn_if_mips 0x79380819 | (\n << 16) | (\wd << 6)
+	insn32_if_mm 0x59380816 | (\n << 16) | (\wd << 6)
 	.set	pop
 	.endm
 #endif
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@ -58,8 +58,8 @@
 * address of a label as argument to inline assembler.	Gas otoh has the
 * annoying difference between la and dla which are only usable for 32-bit
 * rsp. 64-bit code, so can't be used without conditional compilation.
- * The alterantive is switching the assembler to 64-bit code which happens
- * to work right even for 32-bit code ...
+ * The alternative is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code...
 */
 #define instruction_hazard()						\
 do {									\
@ -133,8 +133,8 @@ do {									\
 * address of a label as argument to inline assembler.	Gas otoh has the
 * annoying difference between la and dla which are only usable for 32-bit
 * rsp. 64-bit code, so can't be used without conditional compilation.
- * The alterantive is switching the assembler to 64-bit code which happens
- * to work right even for 32-bit code ...
+ * The alternative is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code...
 */
 #define __instruction_hazard()						\
 do {									\
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@ -100,7 +100,7 @@ typedef volatile struct au1xxx_ddma_desc {
 	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
 	/*
 	 * First 32 bytes are HW specific!!!
-	 * Lets have some SW data following -- make sure it's 32 bytes.
+	 * Let's have some SW data following -- make sure it's 32 bytes.
 	 */
 	u32	sw_status;
 	u32	sw_context;
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@ -140,7 +140,7 @@ static inline int au1300_gpio_getinitlvl(unsigned int gpio)
 * Cases 1 and 3 are intended for boards which want to provide their own
 * GPIO namespace and -operations (i.e. for example you have 8 GPIOs
 * which are in part provided by spare Au1300 GPIO pins and in part by
-* an external FPGA but you still want them to be accssible in linux
+* an external FPGA but you still want them to be accessible in linux
 * as gpio0-7. The board can of course use the alchemy_gpioX_* functions
 * as required).
 */
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
@ -22,7 +22,7 @@ struct bcm63xx_enet_platform_data {
 	int has_phy_interrupt;
 	int phy_interrupt;

-	/* if has_phy, use autonegociated pause parameters or force
+	/* if has_phy, use autonegotiated pause parameters or force
 	 * them */
 	int pause_auto;
 	int pause_rx;
--- a/arch/mips/include/asm/mach-ip27/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@ -64,7 +64,7 @@ static inline void plat_post_dma_flush(struct device *dev)

 static inline int plat_device_is_coherent(struct device *dev)
 {
-	return 1;		/* IP27 non-cohernet mode is unsupported */
+	return 1;		/* IP27 non-coherent mode is unsupported */
 }

 #endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@ -86,7 +86,7 @@ static inline void plat_post_dma_flush(struct device *dev)

 static inline int plat_device_is_coherent(struct device *dev)
 {
-	return 0;		/* IP32 is non-cohernet */
+	return 0;		/* IP32 is non-coherent */
 }

 #endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@ -22,7 +22,7 @@

 /*
 * during early_printk no ioremap possible at this early stage
- * lets use KSEG1 instead
+ * let's use KSEG1 instead
 */
 #define LTQ_ASC0_BASE_ADDR	0x1E100C00
 #define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@ -75,7 +75,7 @@ extern __iomem void *ltq_cgu_membase;

 /*
 * during early_printk no ioremap is possible
- * lets use KSEG1 instead
+ * let's use KSEG1 instead
 */
 #define LTQ_ASC1_BASE_ADDR	0x1E100C00
 #define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
--- a/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
@ -24,7 +24,7 @@ struct temp_range {
 	u8 level;
 };

-#define CONSTANT_SPEED_POLICY	0  /* at constent speed */
+#define CONSTANT_SPEED_POLICY	0  /* at constant speed */
 #define STEP_SPEED_POLICY	1  /* use up/down arrays to describe policy */
 #define KERNEL_HELPER_POLICY	2  /* kernel as a helper to fan control */

--- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@ -56,7 +56,7 @@
 		(0 << MIPS_SEGCFG_PA_SHIFT) |				\
 		(1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
 	or	t0, t2
-	mtc0	t0, $5, 2
+	mtc0	t0, CP0_SEGCTL0

 	/* SegCtl1 */
 	li      t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) |	\
@ -67,7 +67,7 @@
 		(0 << MIPS_SEGCFG_PA_SHIFT) |				\
 		(1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
 	ins	t0, t1, 16, 3
-	mtc0	t0, $5, 3
+	mtc0	t0, CP0_SEGCTL1

 	/* SegCtl2 */
 	li	t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) |	\
@ -77,7 +77,7 @@
 		(4 << MIPS_SEGCFG_PA_SHIFT) |				\
 		(1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
 	or	t0, t2
-	mtc0	t0, $5, 4
+	mtc0	t0, CP0_SEGCTL2

 	jal	mips_ihb
 	mfc0    t0, $16, 5
--- a/arch/mips/include/asm/mips_mt.h
+++ b/arch/mips/include/asm/mips_mt.h
@ -1,5 +1,5 @@
 /*
- * Definitions and decalrations for MIPS MT support that are common between
+ * Definitions and declarations for MIPS MT support that are common between
 * the VSMP, and AP/SP kernel models.
 */
 #ifndef __ASM_MIPS_MT_H
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@ -48,6 +48,9 @@
 #define CP0_CONF $3
 #define CP0_CONTEXT $4
 #define CP0_PAGEMASK $5
+#define CP0_SEGCTL0 $5, 2
+#define CP0_SEGCTL1 $5, 3
+#define CP0_SEGCTL2 $5, 4
 #define CP0_WIRED $6
 #define CP0_INFO $7
 #define CP0_HWRENA $7, 0
@ -726,6 +729,8 @@
 #define MIPS_PWFIELD_PTEI_SHIFT	0
 #define MIPS_PWFIELD_PTEI_MASK	0x0000003f

+#define MIPS_PWSIZE_PS_SHIFT	30
+#define MIPS_PWSIZE_PS_MASK	0x40000000
 #define MIPS_PWSIZE_GDW_SHIFT	24
 #define MIPS_PWSIZE_GDW_MASK	0x3f000000
 #define MIPS_PWSIZE_UDW_SHIFT	18
@ -739,6 +744,12 @@

 #define MIPS_PWCTL_PWEN_SHIFT	31
 #define MIPS_PWCTL_PWEN_MASK	0x80000000
+#define MIPS_PWCTL_XK_SHIFT	28
+#define MIPS_PWCTL_XK_MASK	0x10000000
+#define MIPS_PWCTL_XS_SHIFT	27
+#define MIPS_PWCTL_XS_MASK	0x08000000
+#define MIPS_PWCTL_XU_SHIFT	26
+#define MIPS_PWCTL_XU_MASK	0x04000000
 #define MIPS_PWCTL_DPH_SHIFT	7
 #define MIPS_PWCTL_DPH_MASK	0x00000080
 #define MIPS_PWCTL_HUGEPG_SHIFT	6
@ -1045,6 +1056,33 @@ static inline int mm_insn_16bit(u16 insn)
 	return (opcode >= 1 && opcode <= 3) ? 1 : 0;
 }

+/*
+ * Helper macros for generating raw instruction encodings in inline asm.
+ */
+#ifdef CONFIG_CPU_MICROMIPS
+#define _ASM_INSN16_IF_MM(_enc)			\
+	".insn\n\t"				\
+	".hword (" #_enc ")\n\t"
+#define _ASM_INSN32_IF_MM(_enc)			\
+	".insn\n\t"				\
+	".hword ((" #_enc ") >> 16)\n\t"	\
+	".hword ((" #_enc ") & 0xffff)\n\t"
+#else
+#define _ASM_INSN_IF_MIPS(_enc)			\
+	".insn\n\t"				\
+	".word (" #_enc ")\n\t"
+#endif
+
+#ifndef _ASM_INSN16_IF_MM
+#define _ASM_INSN16_IF_MM(_enc)
+#endif
+#ifndef _ASM_INSN32_IF_MM
+#define _ASM_INSN32_IF_MM(_enc)
+#endif
+#ifndef _ASM_INSN_IF_MIPS
+#define _ASM_INSN_IF_MIPS(_enc)
+#endif
+
 /*
 * TLB Invalidate Flush
 */
@ -1053,7 +1091,9 @@ static inline void tlbinvf(void)
 	__asm__ __volatile__(
 		".set push\n\t"
 		".set noreorder\n\t"
-		".word 0x42000004\n\t" /* tlbinvf */
+		"# tlbinvf\n\t"
+		_ASM_INSN_IF_MIPS(0x42000004)
+		_ASM_INSN32_IF_MM(0x0000537c)
 		".set pop");
 }

@ -1274,9 +1314,9 @@ do {									\
 	"	.set	push					\n"	\
 	"	.set	noat					\n"	\
 	"	.set	mips32r2				\n"	\
-	"	.insn						\n"	\
 	"	# mfhc0 $1, %1					\n"	\
-	"	.word	(0x40410000 | ((%1 & 0x1f) << 11))	\n"	\
+	_ASM_INSN_IF_MIPS(0x40410000 | ((%1 & 0x1f) << 11))		\
+	_ASM_INSN32_IF_MM(0x002000f4 | ((%1 & 0x1f) << 16))		\
 	"	move	%0, $1					\n"	\
 	"	.set	pop					\n"	\
 	: "=r" (__res)							\
@ -1292,8 +1332,8 @@ do {									\
 	"	.set	mips32r2				\n"	\
 	"	move	$1, %0					\n"	\
 	"	# mthc0 $1, %1					\n"	\
-	"	.insn						\n"	\
-	"	.word	(0x40c10000 | ((%1 & 0x1f) << 11))	\n"	\
+	_ASM_INSN_IF_MIPS(0x40c10000 | ((%1 & 0x1f) << 11))		\
+	_ASM_INSN32_IF_MM(0x002002f4 | ((%1 & 0x1f) << 16))		\
 	"	.set	pop					\n"	\
 	:								\
 	: "r" (value), "i" (register));					\
@ -1743,7 +1783,8 @@ do {									\
 		".set\tpush\n\t"					\
 		".set\tnoat\n\t"					\
 		"# mfgc0\t$1, $%1, %2\n\t"				\
-		".word\t(0x40610000 | %1 << 11 | %2)\n\t"		\
+		_ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2)		\
+		_ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11)	\
 		"move\t%0, $1\n\t"					\
 		".set\tpop"						\
 		: "=r" (__res)						\
@ -1757,7 +1798,8 @@ do {									\
 		".set\tpush\n\t"					\
 		".set\tnoat\n\t"					\
 		"# dmfgc0\t$1, $%1, %2\n\t"				\
-		".word\t(0x40610100 | %1 << 11 | %2)\n\t"		\
+		_ASM_INSN_IF_MIPS(0x40610100 | %1 << 11 | %2)		\
+		_ASM_INSN32_IF_MM(0x582004fc | %1 << 16 | %2 << 11)	\
 		"move\t%0, $1\n\t"					\
 		".set\tpop"						\
 		: "=r" (__res)						\
@ -1770,9 +1812,10 @@ do {									\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
 		".set\tnoat\n\t"					\
-		"move\t$1, %0\n\t"					\
+		"move\t$1, %z0\n\t"					\
 		"# mtgc0\t$1, $%1, %2\n\t"				\
-		".word\t(0x40610200 | %1 << 11 | %2)\n\t"		\
+		_ASM_INSN_IF_MIPS(0x40610200 | %1 << 11 | %2)		\
+		_ASM_INSN32_IF_MM(0x002006fc | %1 << 16 | %2 << 11)	\
 		".set\tpop"						\
 		: : "Jr" ((unsigned int)(value)),			\
 		    "i" (register), "i" (sel));				\
@ -1783,9 +1826,10 @@ do {									\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
 		".set\tnoat\n\t"					\
-		"move\t$1, %0\n\t"					\
+		"move\t$1, %z0\n\t"					\
 		"# dmtgc0\t$1, $%1, %2\n\t"				\
-		".word\t(0x40610300 | %1 << 11 | %2)\n\t"		\
+		_ASM_INSN_IF_MIPS(0x40610300 | %1 << 11 | %2)		\
+		_ASM_INSN32_IF_MM(0x582006fc | %1 << 16 | %2 << 11)	\
 		".set\tpop"						\
 		: : "Jr" (value),					\
 		    "i" (register), "i" (sel));				\
@ -2246,7 +2290,6 @@ do {									\

 #else

-#ifdef CONFIG_CPU_MICROMIPS
 #define rddsp(mask)							\
 ({									\
 	unsigned int __res;						\
@ -2255,8 +2298,8 @@ do {									\
 	"	.set	push					\n"	\
 	"	.set	noat					\n"	\
 	"	# rddsp $1, %x1					\n"	\
-	"	.hword	((0x0020067c | (%x1 << 14)) >> 16)	\n"	\
-	"	.hword	((0x0020067c | (%x1 << 14)) & 0xffff)	\n"	\
+	_ASM_INSN_IF_MIPS(0x7c000cb8 | (%x1 << 16))			\
+	_ASM_INSN32_IF_MM(0x0020067c | (%x1 << 14))			\
 	"	move	%0, $1					\n"	\
 	"	.set	pop					\n"	\
 	: "=r" (__res)							\
@ -2271,98 +2314,13 @@ do {									\
 	"	.set	noat					\n"	\
 	"	move	$1, %0					\n"	\
 	"	# wrdsp $1, %x1					\n"	\
-	"	.hword	((0x0020167c | (%x1 << 14)) >> 16)	\n"	\
-	"	.hword	((0x0020167c | (%x1 << 14)) & 0xffff)	\n"	\
+	_ASM_INSN_IF_MIPS(0x7c2004f8 | (%x1 << 11))			\
+	_ASM_INSN32_IF_MM(0x0020167c | (%x1 << 14))			\
 	"	.set	pop					\n"	\
 	:								\
 	: "r" (val), "i" (mask));					\
 } while (0)

-#define _umips_dsp_mfxxx(ins)						\
-({									\
-	unsigned long __treg;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	.hword	0x0001					\n"	\
-	"	.hword	%x1					\n"	\
-	"	move	%0, $1					\n"	\
-	"	.set	pop					\n"	\
-	: "=r" (__treg)							\
-	: "i" (ins));							\
-	__treg;								\
-})
-
-#define _umips_dsp_mtxxx(val, ins)					\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	.hword	0x0001					\n"	\
-	"	.hword	%x1					\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "r" (val), "i" (ins));					\
-} while (0)
-
-#define _umips_dsp_mflo(reg) _umips_dsp_mfxxx((reg << 14) | 0x107c)
-#define _umips_dsp_mfhi(reg) _umips_dsp_mfxxx((reg << 14) | 0x007c)
-
-#define _umips_dsp_mtlo(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x307c))
-#define _umips_dsp_mthi(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x207c))
-
-#define mflo0() _umips_dsp_mflo(0)
-#define mflo1() _umips_dsp_mflo(1)
-#define mflo2() _umips_dsp_mflo(2)
-#define mflo3() _umips_dsp_mflo(3)
-
-#define mfhi0() _umips_dsp_mfhi(0)
-#define mfhi1() _umips_dsp_mfhi(1)
-#define mfhi2() _umips_dsp_mfhi(2)
-#define mfhi3() _umips_dsp_mfhi(3)
-
-#define mtlo0(x) _umips_dsp_mtlo(x, 0)
-#define mtlo1(x) _umips_dsp_mtlo(x, 1)
-#define mtlo2(x) _umips_dsp_mtlo(x, 2)
-#define mtlo3(x) _umips_dsp_mtlo(x, 3)
-
-#define mthi0(x) _umips_dsp_mthi(x, 0)
-#define mthi1(x) _umips_dsp_mthi(x, 1)
-#define mthi2(x) _umips_dsp_mthi(x, 2)
-#define mthi3(x) _umips_dsp_mthi(x, 3)
-
-#else  /* !CONFIG_CPU_MICROMIPS */
-#define rddsp(mask)							\
-({									\
-	unsigned int __res;						\
-									\
-	__asm__ __volatile__(						\
-	"	.set	push				\n"		\
-	"	.set	noat				\n"		\
-	"	# rddsp $1, %x1				\n"		\
-	"	.word	0x7c000cb8 | (%x1 << 16)	\n"		\
-	"	move	%0, $1				\n"		\
-	"	.set	pop				\n"		\
-	: "=r" (__res)							\
-	: "i" (mask));							\
-	__res;								\
-})
-
-#define wrdsp(val, mask)						\
-do {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	move	$1, %0					\n"	\
-	"	# wrdsp $1, %x1					\n"	\
-	"	.word	0x7c2004f8 | (%x1 << 11)		\n"	\
-	"	.set	pop					\n"	\
-        :								\
-	: "r" (val), "i" (mask));					\
-} while (0)
-
 #define _dsp_mfxxx(ins)							\
 ({									\
 	unsigned long __treg;						\
@ -2370,7 +2328,8 @@ do {									\
 	__asm__ __volatile__(						\
 	"	.set	push					\n"	\
 	"	.set	noat					\n"	\
-	"	.word	(0x00000810 | %1)			\n"	\
+	_ASM_INSN_IF_MIPS(0x00000810 | %X1)				\
+	_ASM_INSN32_IF_MM(0x0001007c | %x1)				\
 	"	move	%0, $1					\n"	\
 	"	.set	pop					\n"	\
 	: "=r" (__treg)							\
@ -2384,18 +2343,31 @@ do {									\
 	"	.set	push					\n"	\
 	"	.set	noat					\n"	\
 	"	move	$1, %0					\n"	\
-	"	.word	(0x00200011 | %1)			\n"	\
+	_ASM_INSN_IF_MIPS(0x00200011 | %X1)				\
+	_ASM_INSN32_IF_MM(0x0001207c | %x1)				\
 	"	.set	pop					\n"	\
 	:								\
 	: "r" (val), "i" (ins));					\
 } while (0)

+#ifdef CONFIG_CPU_MICROMIPS
+
+#define _dsp_mflo(reg) _dsp_mfxxx((reg << 14) | 0x1000)
+#define _dsp_mfhi(reg) _dsp_mfxxx((reg << 14) | 0x0000)
+
+#define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 14) | 0x1000))
+#define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 14) | 0x0000))
+
+#else  /* !CONFIG_CPU_MICROMIPS */
+
 #define _dsp_mflo(reg) _dsp_mfxxx((reg << 21) | 0x0002)
 #define _dsp_mfhi(reg) _dsp_mfxxx((reg << 21) | 0x0000)

 #define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0002))
 #define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0000))

+#endif /* CONFIG_CPU_MICROMIPS */
+
 #define mflo0() _dsp_mflo(0)
 #define mflo1() _dsp_mflo(1)
 #define mflo2() _dsp_mflo(2)
@ -2416,7 +2388,6 @@ do {									\
 #define mthi2(x) _dsp_mthi(x, 2)
 #define mthi3(x) _dsp_mthi(x, 3)

-#endif /* CONFIG_CPU_MICROMIPS */
 #endif

 /*
@ -2556,28 +2527,32 @@ static inline void guest_tlb_probe(void)
 {
 	__asm__ __volatile__(
 		"# tlbgp\n\t"
-		".word 0x42000010");
+		_ASM_INSN_IF_MIPS(0x42000010)
+		_ASM_INSN32_IF_MM(0x0000017c));
 }

 static inline void guest_tlb_read(void)
 {
 	__asm__ __volatile__(
 		"# tlbgr\n\t"
-		".word 0x42000009");
+		_ASM_INSN_IF_MIPS(0x42000009)
+		_ASM_INSN32_IF_MM(0x0000117c));
 }

 static inline void guest_tlb_write_indexed(void)
 {
 	__asm__ __volatile__(
 		"# tlbgwi\n\t"
-		".word 0x4200000a");
+		_ASM_INSN_IF_MIPS(0x4200000a)
+		_ASM_INSN32_IF_MM(0x0000217c));
 }

 static inline void guest_tlb_write_random(void)
 {
 	__asm__ __volatile__(
 		"# tlbgwr\n\t"
-		".word 0x4200000e");
+		_ASM_INSN_IF_MIPS(0x4200000e)
+		_ASM_INSN32_IF_MM(0x0000317c));
 }

 /*
@ -2587,7 +2562,8 @@ static inline void guest_tlbinvf(void)
 {
 	__asm__ __volatile__(
 		"# tlbginvf\n\t"
-		".word 0x4200000c");
+		_ASM_INSN_IF_MIPS(0x4200000c)
+		_ASM_INSN32_IF_MM(0x0000517c));
 }

 #endif	/* !TOOLCHAIN_SUPPORTS_VIRT */
--- a/arch/mips/include/asm/msa.h
+++ b/arch/mips/include/asm/msa.h
@ -192,13 +192,6 @@ static inline void write_msa_##name(unsigned int val)		\
 * allow compilation with toolchains that do not support MSA. Once all
 * toolchains in use support MSA these can be removed.
 */
-#ifdef CONFIG_CPU_MICROMIPS
-#define CFC_MSA_INSN	0x587e0056
-#define CTC_MSA_INSN	0x583e0816
-#else
-#define CFC_MSA_INSN	0x787e0059
-#define CTC_MSA_INSN	0x783e0819
-#endif

 #define __BUILD_MSA_CTL_REG(name, cs)				\
 static inline unsigned int read_msa_##name(void)		\
@ -207,11 +200,12 @@ static inline unsigned int read_msa_##name(void)		\
 	__asm__ __volatile__(					\
 	"	.set	push\n"					\
 	"	.set	noat\n"					\
-	"	.insn\n"					\
-	"	.word	%1 | (" #cs " << 11)\n"			\
+	"	# cfcmsa $1, $%1\n"				\
+	_ASM_INSN_IF_MIPS(0x787e0059 | %1 << 11)		\
+	_ASM_INSN32_IF_MM(0x587e0056 | %1 << 11)		\
 	"	move	%0, $1\n"				\
 	"	.set	pop\n"					\
-	: "=r"(reg) : "i"(CFC_MSA_INSN));			\
+	: "=r"(reg) : "i"(cs));					\
 	return reg;						\
 }								\
 								\
@ -221,10 +215,11 @@ static inline void write_msa_##name(unsigned int val)		\
 	"	.set	push\n"					\
 	"	.set	noat\n"					\
 	"	move	$1, %0\n"				\
-	"	.insn\n"					\
-	"	.word	%1 | (" #cs " << 6)\n"			\
+	"	# ctcmsa $%1, $1\n"				\
+	_ASM_INSN_IF_MIPS(0x783e0819 | %1 << 6)			\
+	_ASM_INSN32_IF_MM(0x583e0816 | %1 << 6)			\
 	"	.set	pop\n"					\
-	: : "r"(val), "i"(CTC_MSA_INSN));			\
+	: : "r"(val), "i"(cs));					\
 }

 #endif /* !TOOLCHAIN_SUPPORTS_MSA */
--- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
+++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h
@ -146,7 +146,7 @@ typedef struct {
 * This structure contains the global state of all command queues.
 * It is stored in a bootmem named block and shared by all
 * applications running on Octeon. Tickets are stored in a differnet
- * cahce line that queue information to reduce the contention on the
+ * cache line that queue information to reduce the contention on the
 * ll/sc used to get a ticket. If this is not the case, the update
 * of queue state causes the ll/sc to fail quite often.
 */
--- a/arch/mips/include/asm/octeon/cvmx-helper-board.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@ -94,7 +94,7 @@ extern int cvmx_helper_board_get_mii_address(int ipd_port);
 * @phy_addr:  The address of the PHY to program
 * @link_flags:
 *		    Flags to control autonegotiation.  Bit 0 is autonegotiation
- *		    enable/disable to maintain backware compatibility.
+ *		    enable/disable to maintain backward compatibility.
 * @link_info: Link speed to program. If the speed is zero and autonegotiation
 *		    is enabled, all possible negotiation speeds are advertised.
 *
--- a/arch/mips/include/asm/octeon/cvmx-ipd.h
+++ b/arch/mips/include/asm/octeon/cvmx-ipd.h
@ -39,7 +39,7 @@

 enum cvmx_ipd_mode {
   CVMX_IPD_OPC_MODE_STT = 0LL,	  /* All blocks DRAM, not cached in L2 */
-   CVMX_IPD_OPC_MODE_STF = 1LL,	  /* All bloccks into  L2 */
+   CVMX_IPD_OPC_MODE_STF = 1LL,	  /* All blocks into  L2 */
   CVMX_IPD_OPC_MODE_STF1_STT = 2LL,   /* 1st block L2, rest DRAM */
   CVMX_IPD_OPC_MODE_STF2_STT = 3LL    /* 1st, 2nd blocks L2, rest DRAM */
 };
--- a/arch/mips/include/asm/octeon/cvmx-pow.h
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@ -2051,7 +2051,7 @@ static inline void cvmx_pow_tag_sw_desched(uint32_t tag,
 }

 /**
- * Descchedules the current work queue entry.
+ * Deschedules the current work queue entry.
 *
 * @no_sched: no schedule flag value to be set on the work queue
 *	      entry.  If this is set the entry will not be
--- a/arch/mips/include/asm/sgi/hpc3.h
+++ b/arch/mips/include/asm/sgi/hpc3.h
@ -39,7 +39,7 @@ struct hpc3_pbus_dmacregs {
 	volatile u32 pbdma_dptr;	/* pbus dma channel desc ptr */
 	u32 _unused0[0x1000/4 - 2];	/* padding */
 	volatile u32 pbdma_ctrl;	/* pbus dma channel control register has
-					 * copletely different meaning for read
+					 * completely different meaning for read
 					 * compared with write */
 	/* read */
 #define HPC3_PDMACTRL_INT	0x00000001 /* interrupt (cleared after read) */
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@ -481,7 +481,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			/*
 			 * OK we are here either because we hit a NAL
 			 * instruction or because we are emulating an
-			 * old bltzal{,l} one. Lets figure out what the
+			 * old bltzal{,l} one. Let's figure out what the
 			 * case really is.
 			 */
 			if (!insn.i_format.rs) {
@ -515,7 +515,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			/*
 			 * OK we are here either because we hit a BAL
 			 * instruction or because we are emulating an
-			 * old bgezal{,l} one. Lets figure out what the
+			 * old bgezal{,l} one. Let's figure out what the
 			 * case really is.
 			 */
 			if (!insn.i_format.rs) {
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@ -441,6 +441,21 @@ LEAF(mips_cps_boot_vpes)
 	mfc0	t0, CP0_CONFIG
 	mttc0	t0, CP0_CONFIG

+	/*
+	 * Copy the EVA config from this VPE if the CPU supports it.
+	 * CONFIG3 must exist to be running MT startup - just read it.
+	 */
+	mfc0	t0, CP0_CONFIG, 3
+	and	t0, t0, MIPS_CONF3_SC
+	beqz	t0, 3f
+	 nop
+	mfc0    t0, CP0_SEGCTL0
+	mttc0	t0, CP0_SEGCTL0
+	mfc0    t0, CP0_SEGCTL1
+	mttc0	t0, CP0_SEGCTL1
+	mfc0    t0, CP0_SEGCTL2
+	mttc0	t0, CP0_SEGCTL2
+3:
 	/* Ensure no software interrupts are pending */
 	mttc0	zero, CP0_CAUSE
 	mttc0	zero, CP0_STATUS
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@ -833,10 +833,8 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
 		c->options |= MIPS_CPU_MAAR;
 	if (config5 & MIPS_CONF5_LLB)
 		c->options |= MIPS_CPU_RW_LLB;
-#ifdef CONFIG_XPA
 	if (config5 & MIPS_CONF5_MVH)
-		c->options |= MIPS_CPU_XPA;
-#endif
+		c->options |= MIPS_CPU_MVH;
 	if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP))
 		c->options |= MIPS_CPU_VP;

--- a/arch/mips/kernel/elf.c
+++ b/arch/mips/kernel/elf.c
@ -88,7 +88,7 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 	elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
 	flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;

-	/* Lets see if this is an O32 ELF */
+	/* Let's see if this is an O32 ELF */
 	if (elf32) {
 		if (flags & EF_MIPS_FP64) {
 			/*
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@ -54,6 +54,9 @@ void __init init_IRQ(void)
 	for (i = 0; i < NR_IRQS; i++)
 		irq_set_noprobe(i);

+	if (cpu_has_veic)
+		clear_c0_status(ST0_IM);
+
 	arch_init_irq();
 }

--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@ -2202,7 +2202,7 @@ fpu_emul:
 	}

 	/*
-	 * Lets not return to userland just yet. It's constly and
+	 * Let's not return to userland just yet. It's costly and
 	 * it's likely we have more R2 instructions to emulate
 	 */
 	if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) {
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@ -345,7 +345,7 @@ static int get_frame_info(struct mips_frame_info *info)
 		return 0;
 	if (info->pc_offset < 0) /* leaf */
 		return 1;
-	/* prologue seems boggus... */
+	/* prologue seems bogus... */
 err:
 	return -1;
 }
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@ -770,15 +770,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	sigset_t *oldset = sigmask_to_save();
 	int ret;
 	struct mips_abi *abi = current->thread.abi;
-#ifdef CONFIG_CPU_MICROMIPS
-	void *vdso;
-	unsigned long tmp = (unsigned long)current->mm->context.vdso;
-
-	set_isa16_mode(tmp);
-	vdso = (void *)tmp;
-#else
 	void *vdso = current->mm->context.vdso;
-#endif

 	if (regs->regs[0]) {
 		switch(regs->regs[2]) {
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@ -359,8 +359,12 @@ static void cps_init_secondary(void)
 		BUG_ON(ident != mips_cm_vp_id(smp_processor_id()));
 	}

-	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
-				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
+	if (cpu_has_veic)
+		clear_c0_status(ST0_IM);
+	else
+		change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
+					 STATUSF_IP4 | STATUSF_IP5 |
+					 STATUSF_IP6 | STATUSF_IP7);
 }

 static void cps_smp_finish(void)
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@ -43,7 +43,7 @@ static int pvc_line_proc_show(struct seq_file *m, void *v)
 {
 	int lineno = *(int *)m->private;

-	if (lineno < 0 || lineno > PVC_NLINES) {
+	if (lineno < 0 || lineno >= PVC_NLINES) {
 		printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno);
 		return 0;
 	}
@ -67,7 +67,7 @@ static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf,
 	char kbuf[PVC_LINELEN];
 	size_t len;

-	BUG_ON(lineno < 0 || lineno > PVC_NLINES);
+	BUG_ON(lineno < 0 || lineno >= PVC_NLINES);

 	len = min(count, sizeof(kbuf) - 1);
 	if (copy_from_user(kbuf, buf, len))
--- a/arch/mips/lib/ashldi3.c
+++ b/arch/mips/lib/ashldi3.c
@ -2,7 +2,7 @@

 #include "libgcc.h"

-long long __ashldi3(long long u, word_type b)
+long long notrace __ashldi3(long long u, word_type b)
 {
 	DWunion uu, w;
 	word_type bm;
--- a/arch/mips/lib/ashrdi3.c
+++ b/arch/mips/lib/ashrdi3.c
@ -2,7 +2,7 @@

 #include "libgcc.h"

-long long __ashrdi3(long long u, word_type b)
+long long notrace __ashrdi3(long long u, word_type b)
 {
 	DWunion uu, w;
 	word_type bm;
--- a/arch/mips/lib/bswapdi.c
+++ b/arch/mips/lib/bswapdi.c
@ -1,6 +1,6 @@
 #include <linux/module.h>

-unsigned long long __bswapdi2(unsigned long long u)
+unsigned long long notrace __bswapdi2(unsigned long long u)
 {
 	return (((u) & 0xff00000000000000ull) >> 56) |
 	       (((u) & 0x00ff000000000000ull) >> 40) |
--- a/arch/mips/lib/bswapsi.c
+++ b/arch/mips/lib/bswapsi.c
@ -1,6 +1,6 @@
 #include <linux/module.h>

-unsigned int __bswapsi2(unsigned int u)
+unsigned int notrace __bswapsi2(unsigned int u)
 {
 	return (((u) & 0xff000000) >> 24) |
 	       (((u) & 0x00ff0000) >>  8) |
--- a/arch/mips/lib/cmpdi2.c
+++ b/arch/mips/lib/cmpdi2.c
@ -2,7 +2,7 @@

 #include "libgcc.h"

-word_type __cmpdi2(long long a, long long b)
+word_type notrace __cmpdi2(long long a, long long b)
 {
 	const DWunion au = {
 		.ll = a
--- a/arch/mips/lib/lshrdi3.c
+++ b/arch/mips/lib/lshrdi3.c
@ -2,7 +2,7 @@

 #include "libgcc.h"

-long long __lshrdi3(long long u, word_type b)
+long long notrace __lshrdi3(long long u, word_type b)
 {
 	DWunion uu, w;
 	word_type bm;
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@ -256,7 +256,7 @@

 	/*
 	 * Macro to build the __copy_user common code
-	 * Arguements:
+	 * Arguments:
 	 * mode : LEGACY_MODE or EVA_MODE
 	 * from : Source operand. USEROP or KERNELOP
 	 * to   : Destination operand. USEROP or KERNELOP
--- a/arch/mips/lib/ucmpdi2.c
+++ b/arch/mips/lib/ucmpdi2.c
@ -2,7 +2,7 @@

 #include "libgcc.h"

-word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+word_type notrace __ucmpdi2(unsigned long long a, unsigned long long b)
 {
 	const DWunion au = {.ll = a};
 	const DWunion bu = {.ll = b};
--- a/arch/mips/loongson64/loongson-3/hpet.c
+++ b/arch/mips/loongson64/loongson-3/hpet.c
@ -212,7 +212,7 @@ static void hpet_setup(void)
 	/* set hpet base address */
 	smbus_write(SMBUS_PCI_REGB4, HPET_ADDR);

-	/* enable decodeing of access to HPET MMIO*/
+	/* enable decoding of access to HPET MMIO*/
 	smbus_enable(SMBUS_PCI_REG40, (1 << 28));

 	/* HPET irq enable */
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@ -8,7 +8,7 @@
 #include "ieee754.h"

 /*
- * Emulate the arbritrary instruction ir at xcp->cp0_epc.  Required when
+ * Emulate the arbitrary instruction ir at xcp->cp0_epc.  Required when
 * we have to emulate the instruction in a COP1 branch delay slot.  Do
 * not change cp0_epc due to the instruction
 *
@ -88,7 +88,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 	fr = (struct emuframe __user *)
 		((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);

-	/* Verify that the stack pointer is not competely insane */
+	/* Verify that the stack pointer is not completely insane */
 	if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe))))
 		return SIGBUS;

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@ -2361,8 +2361,9 @@ static void print_htw_config(void)
 		(config & MIPS_PWFIELD_PTEI_MASK) >> MIPS_PWFIELD_PTEI_SHIFT);

 	config = read_c0_pwsize();
-	pr_debug("PWSize  (0x%0*lx): GDW: 0x%02lx  UDW: 0x%02lx  MDW: 0x%02lx  PTW: 0x%02lx  PTEW: 0x%02lx\n",
+	pr_debug("PWSize  (0x%0*lx): PS: 0x%lx  GDW: 0x%02lx  UDW: 0x%02lx  MDW: 0x%02lx  PTW: 0x%02lx  PTEW: 0x%02lx\n",
 		field, config,
+		(config & MIPS_PWSIZE_PS_MASK) >> MIPS_PWSIZE_PS_SHIFT,
 		(config & MIPS_PWSIZE_GDW_MASK) >> MIPS_PWSIZE_GDW_SHIFT,
 		(config & MIPS_PWSIZE_UDW_MASK) >> MIPS_PWSIZE_UDW_SHIFT,
 		(config & MIPS_PWSIZE_MDW_MASK) >> MIPS_PWSIZE_MDW_SHIFT,
@ -2370,9 +2371,12 @@ static void print_htw_config(void)
 		(config & MIPS_PWSIZE_PTEW_MASK) >> MIPS_PWSIZE_PTEW_SHIFT);

 	pwctl = read_c0_pwctl();
-	pr_debug("PWCtl   (0x%x): PWEn: 0x%x  DPH: 0x%x  HugePg: 0x%x  Psn: 0x%x\n",
+	pr_debug("PWCtl   (0x%x): PWEn: 0x%x  XK: 0x%x  XS: 0x%x  XU: 0x%x  DPH: 0x%x  HugePg: 0x%x  Psn: 0x%x\n",
 		pwctl,
 		(pwctl & MIPS_PWCTL_PWEN_MASK) >> MIPS_PWCTL_PWEN_SHIFT,
+		(pwctl & MIPS_PWCTL_XK_MASK) >> MIPS_PWCTL_XK_SHIFT,
+		(pwctl & MIPS_PWCTL_XS_MASK) >> MIPS_PWCTL_XS_SHIFT,
+		(pwctl & MIPS_PWCTL_XU_MASK) >> MIPS_PWCTL_XU_SHIFT,
 		(pwctl & MIPS_PWCTL_DPH_MASK) >> MIPS_PWCTL_DPH_SHIFT,
 		(pwctl & MIPS_PWCTL_HUGEPG_MASK) >> MIPS_PWCTL_HUGEPG_SHIFT,
 		(pwctl & MIPS_PWCTL_PSN_MASK) >> MIPS_PWCTL_PSN_SHIFT);
@ -2427,15 +2431,25 @@ static void config_htw_params(void)
 	if (CONFIG_PGTABLE_LEVELS >= 3)
 		pwsize |= ilog2(PTRS_PER_PMD) << MIPS_PWSIZE_MDW_SHIFT;

-	pwsize |= ilog2(sizeof(pte_t)/4) << MIPS_PWSIZE_PTEW_SHIFT;
+	/* Set pointer size to size of directory pointers */
+	if (config_enabled(CONFIG_64BIT))
+		pwsize |= MIPS_PWSIZE_PS_MASK;
+	/* PTEs may be multiple pointers long (e.g. with XPA) */
+	pwsize |= ((PTE_T_LOG2 - PGD_T_LOG2) << MIPS_PWSIZE_PTEW_SHIFT)
+			& MIPS_PWSIZE_PTEW_MASK;

 	write_c0_pwsize(pwsize);

 	/* Make sure everything is set before we enable the HTW */
 	back_to_back_c0_hazard();

-	/* Enable HTW and disable the rest of the pwctl fields */
+	/*
+	 * Enable HTW (and only for XUSeg on 64-bit), and disable the rest of
+	 * the pwctl fields.
+	 */
 	config = 1 << MIPS_PWCTL_PWEN_SHIFT;
+	if (config_enabled(CONFIG_64BIT))
+		config |= MIPS_PWCTL_XU_MASK;
 	write_c0_pwctl(config);
 	pr_info("Hardware Page Table Walker enabled\n");

--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@ -24,7 +24,7 @@ struct op_counter_config {
 	unsigned long unit_mask;
 };

-/* Per-architecture configury and hooks.  */
+/* Per-architecture configure and hooks.  */
 struct op_mips_model {
 	void (*reg_setup) (struct op_counter_config *);
 	void (*cpu_setup) (void *dummy);
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@ -33,9 +33,9 @@ static u32 emulate_ioc3_cfg(int where, int size)
 * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
 * not really documented, so right now I can't write code which uses it.
 * Therefore we use type 0 accesses for now even though they won't work
- * correcly for PCI-to-PCI bridges.
+ * correctly for PCI-to-PCI bridges.
 *
- * The function is complicated by the ultimate brokeness of the IOC3 chip
+ * The function is complicated by the ultimate brokenness of the IOC3 chip
 * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
 * accesses and does only decode parts of it's address space.
 */
--- a/arch/mips/pistachio/init.c
+++ b/arch/mips/pistachio/init.c
@ -83,12 +83,16 @@ static void __init plat_setup_iocoherency(void)
 	}
 }

-void __init plat_mem_setup(void)
+void __init *plat_get_fdt(void)
 {
 	if (fw_arg0 != -2)
 		panic("Device-tree not present");
+	return (void *)fw_arg1;
+}

-	__dt_setup_arch((void *)fw_arg1);
+void __init plat_mem_setup(void)
+{
+	__dt_setup_arch(plat_get_fdt());

 	plat_setup_iocoherency();
 }
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@ -188,6 +188,41 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
 	FUNC("gpio", 0, 11, 1),
 };

+static struct rt2880_pmx_func p4led_kn_grp_mt7628[] = {
+	FUNC("jtag", 3, 30, 1),
+	FUNC("util", 2, 30, 1),
+	FUNC("gpio", 1, 30, 1),
+	FUNC("p4led_kn", 0, 30, 1),
+};
+
+static struct rt2880_pmx_func p3led_kn_grp_mt7628[] = {
+	FUNC("jtag", 3, 31, 1),
+	FUNC("util", 2, 31, 1),
+	FUNC("gpio", 1, 31, 1),
+	FUNC("p3led_kn", 0, 31, 1),
+};
+
+static struct rt2880_pmx_func p2led_kn_grp_mt7628[] = {
+	FUNC("jtag", 3, 32, 1),
+	FUNC("util", 2, 32, 1),
+	FUNC("gpio", 1, 32, 1),
+	FUNC("p2led_kn", 0, 32, 1),
+};
+
+static struct rt2880_pmx_func p1led_kn_grp_mt7628[] = {
+	FUNC("jtag", 3, 33, 1),
+	FUNC("util", 2, 33, 1),
+	FUNC("gpio", 1, 33, 1),
+	FUNC("p1led_kn", 0, 33, 1),
+};
+
+static struct rt2880_pmx_func p0led_kn_grp_mt7628[] = {
+	FUNC("jtag", 3, 34, 1),
+	FUNC("rsvd", 2, 34, 1),
+	FUNC("gpio", 1, 34, 1),
+	FUNC("p0led_kn", 0, 34, 1),
+};
+
 static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
 	FUNC("rsvd", 3, 35, 1),
 	FUNC("rsvd", 2, 35, 1),
@ -195,16 +230,61 @@ static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
 	FUNC("wled_kn", 0, 35, 1),
 };

+static struct rt2880_pmx_func p4led_an_grp_mt7628[] = {
+	FUNC("jtag", 3, 39, 1),
+	FUNC("util", 2, 39, 1),
+	FUNC("gpio", 1, 39, 1),
+	FUNC("p4led_an", 0, 39, 1),
+};
+
+static struct rt2880_pmx_func p3led_an_grp_mt7628[] = {
+	FUNC("jtag", 3, 40, 1),
+	FUNC("util", 2, 40, 1),
+	FUNC("gpio", 1, 40, 1),
+	FUNC("p3led_an", 0, 40, 1),
+};
+
+static struct rt2880_pmx_func p2led_an_grp_mt7628[] = {
+	FUNC("jtag", 3, 41, 1),
+	FUNC("util", 2, 41, 1),
+	FUNC("gpio", 1, 41, 1),
+	FUNC("p2led_an", 0, 41, 1),
+};
+
+static struct rt2880_pmx_func p1led_an_grp_mt7628[] = {
+	FUNC("jtag", 3, 42, 1),
+	FUNC("util", 2, 42, 1),
+	FUNC("gpio", 1, 42, 1),
+	FUNC("p1led_an", 0, 42, 1),
+};
+
+static struct rt2880_pmx_func p0led_an_grp_mt7628[] = {
+	FUNC("jtag", 3, 43, 1),
+	FUNC("rsvd", 2, 43, 1),
+	FUNC("gpio", 1, 43, 1),
+	FUNC("p0led_an", 0, 43, 1),
+};
+
 static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
-	FUNC("rsvd", 3, 35, 1),
-	FUNC("rsvd", 2, 35, 1),
-	FUNC("gpio", 1, 35, 1),
-	FUNC("wled_an", 0, 35, 1),
+	FUNC("rsvd", 3, 44, 1),
+	FUNC("rsvd", 2, 44, 1),
+	FUNC("gpio", 1, 44, 1),
+	FUNC("wled_an", 0, 44, 1),
 };

 #define MT7628_GPIO_MODE_MASK		0x3

+#define MT7628_GPIO_MODE_P4LED_KN	58
+#define MT7628_GPIO_MODE_P3LED_KN	56
+#define MT7628_GPIO_MODE_P2LED_KN	54
+#define MT7628_GPIO_MODE_P1LED_KN	52
+#define MT7628_GPIO_MODE_P0LED_KN	50
 #define MT7628_GPIO_MODE_WLED_KN	48
+#define MT7628_GPIO_MODE_P4LED_AN	42
+#define MT7628_GPIO_MODE_P3LED_AN	40
+#define MT7628_GPIO_MODE_P2LED_AN	38
+#define MT7628_GPIO_MODE_P1LED_AN	36
+#define MT7628_GPIO_MODE_P0LED_AN	34
 #define MT7628_GPIO_MODE_WLED_AN	32
 #define MT7628_GPIO_MODE_PWM1		30
 #define MT7628_GPIO_MODE_PWM0		28
@ -223,9 +303,9 @@ static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
 #define MT7628_GPIO_MODE_GPIO		0

 static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
-	GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+	GRP_G("pwm1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM1),
-	GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+	GRP_G("pwm0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM0),
 	GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_UART2),
@ -251,8 +331,28 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 				1, MT7628_GPIO_MODE_GPIO),
 	GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_WLED_AN),
+	GRP_G("p0led_an", p0led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P0LED_AN),
+	GRP_G("p1led_an", p1led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P1LED_AN),
+	GRP_G("p2led_an", p2led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P2LED_AN),
+	GRP_G("p3led_an", p3led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P3LED_AN),
+	GRP_G("p4led_an", p4led_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P4LED_AN),
 	GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_WLED_KN),
+	GRP_G("p0led_kn", p0led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P0LED_KN),
+	GRP_G("p1led_kn", p1led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P1LED_KN),
+	GRP_G("p2led_kn", p2led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P2LED_KN),
+	GRP_G("p3led_kn", p3led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P3LED_KN),
+	GRP_G("p4led_kn", p4led_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_P4LED_KN),
 	{ 0 }
 };

--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@ -105,7 +105,7 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
 	prb.iprb_ff = force_fire_and_forget ? 1 : 0;

 	/*
-	 * Set the appropriate number of PIO cresits for the widget.
+	 * Set the appropriate number of PIO credits for the widget.
 	 */
 	prb.iprb_xtalkctr = credits;

--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@ -23,7 +23,7 @@ typedef unsigned long machreg_t;
 static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;

 /*
- * Lets see what else we need to do here. Set up sp, gp?
+ * Let's see what else we need to do here. Set up sp, gp?
 */
 void nmi_dump(void)
 {
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@ -67,7 +67,7 @@ static int xbow_probe(nasid_t nasid)
 		return -ENODEV;

 	/*
-	 * Okay, here's a xbow. Lets arbitrate and find
+	 * Okay, here's a xbow. Let's arbitrate and find
 	 * out if we should initialize it. Set enabled
 	 * hub connected at highest or lowest widget as
 	 * master.
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@ -263,7 +263,7 @@ spurious_8259A_irq:
 		static int spurious_irq_mask;
 		/*
 		 * At this point we can be sure the IRQ is spurious,
-		 * lets ACK and report it. [once per IRQ]
+		 * let's ACK and report it. [once per IRQ]
 		 */
 		if (!(spurious_irq_mask & irqmask)) {
 			printk(KERN_DEBUG
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@ -5,10 +5,12 @@ obj-vdso-y := elf.o gettimeofday.o sigreturn.o
 ccflags-vdso := \
 	$(filter -I%,$(KBUILD_CFLAGS)) \
 	$(filter -E%,$(KBUILD_CFLAGS)) \
+	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS))
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
-	-O2 -g -fPIC -fno-common -fno-builtin -G 0 -DDISABLE_BRANCH_PROFILING \
+	-O2 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \
+	-DDISABLE_BRANCH_PROFILING \
 	$(call cc-option, -fno-stack-protector)
 aflags-vdso := $(ccflags-vdso) \
 	$(filter -I%,$(KBUILD_CFLAGS)) \
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@ -3,7 +3,7 @@
 *
 *  Copyright (C) 2001-2002  MontaVista Software Inc.
 *    Author: Yoichi Yuasa <source@mvista.com>
- *  Copuright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@ -968,7 +968,7 @@ static void __init __gic_init(unsigned long gic_base_addr,
 			      unsigned int cpu_vec, unsigned int irqbase,
 			      struct device_node *node)
 {
-	unsigned int gicconfig;
+	unsigned int gicconfig, cpu;
 	unsigned int v[2];

 	__gic_base_addr = gic_base_addr;
@ -985,6 +985,14 @@ static void __init __gic_init(unsigned long gic_base_addr,
 	gic_vpes = gic_vpes + 1;

 	if (cpu_has_veic) {
+		/* Set EIC mode for all VPEs */
+		for_each_present_cpu(cpu) {
+			gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR),
+				  mips_cm_vp_id(cpu));
+			gic_write(GIC_REG(VPE_OTHER, GIC_VPE_CTL),
+				  GIC_VPE_CTL_EIC_MODE_MSK);
+		}
+
 		/* Always use vector 1 in EIC mode */
 		gic_cpu_pin = 0;
 		timer_cpu_pin = gic_cpu_pin;