regulator: ab8500: Remove USB regulator

The USB regulator is controlled by hardware. The software support
was only needed for early hardware (ED) which is no longer supported.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Lee Jones 2013-03-28 16:11:08 +00:00 committed by Mark Brown
parent 18bc2b3930
commit 41a06aa738
2 changed files with 0 additions and 21 deletions

View file

@ -488,25 +488,6 @@ static struct ab8500_regulator_info
.update_val_idle = 0x82,
.update_val_normal = 0x02,
},
/*
* Regulators with fixed voltage and normal mode
*/
[AB8500_LDO_USB] = {
.desc = {
.name = "LDO-USB",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 3300000,
.enable_time = 150,
},
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
},
[AB8500_LDO_AUDIO] = {
.desc = {
.name = "LDO-AUDIO",
@ -862,7 +843,6 @@ static struct of_regulator_match ab8500_regulator_matches[] = {
{ .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
{ .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
{ .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
{ .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },

View file

@ -19,7 +19,6 @@ enum ab8500_regulator_id {
AB8500_LDO_AUX3,
AB8500_LDO_INTCORE,
AB8500_LDO_TVOUT,
AB8500_LDO_USB,
AB8500_LDO_AUDIO,
AB8500_LDO_ANAMIC1,
AB8500_LDO_ANAMIC2,