redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issues

Browse source 
When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims
the device is working, but it really isn't configured correctly.  The BIOS
*will* configure it, but only if we call _SRS after (1) reversing the order
of the SIR and FIR I/O port regions and (2) changing the IRQ from
active-high to active-low.

This patch addresses the 2.6.22 regression:
    "no irda0 interface (2.6.21 was OK), smsc does not find chip"

I tested this on a Portege 4000.  The smsc-ircc2 driver correctly detects
the device, and "irattach irda0 -s && irdadump" shows transmitted and
received packets.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Bjorn Helgaas 2007-07-06 02:39:54 -07:00 committed by Linus Torvalds
parent d57d973101
commit 41a5311465
1 changed files with 54 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

63
drivers/pnp/quirks.c
View file

@ -136,11 +136,10 @@ static int quirk_smc_fir_enabled(struct pnp_dev *dev)
static void quirk_smc_enable(struct pnp_dev *dev)
{
/*
* If the BIOS left the device disabled, or it is enabled and
* responding correctly, we're in good shape.
*/
if (!dev->active || quirk_smc_fir_enabled(dev))
struct resource fir, sir, irq;
pnp_activate_dev(dev);
if (quirk_smc_fir_enabled(dev))
return;
/*
@ -152,16 +151,62 @@ static void quirk_smc_enable(struct pnp_dev *dev)
* this. Fortunately, they do fix things up if we auto-configure
* the device using its _PRS and _SRS methods.
*/
dev_err(&dev->dev, "%s device not responding, auto-configuring "
"resources\n", dev->id->id);
dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; "
"auto-configuring\n", dev->id->id,
(unsigned long) pnp_port_start(dev, 0),
(unsigned long) pnp_port_start(dev, 1));
pnp_disable_dev(dev);
pnp_init_resource_table(&dev->res);
pnp_auto_config_dev(dev);
pnp_activate_dev(dev);
if (quirk_smc_fir_enabled(dev)) {
dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
(unsigned long) pnp_port_start(dev, 0),
(unsigned long) pnp_port_start(dev, 1));
return;
}
if (!quirk_smc_fir_enabled(dev))
dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n");
/*
* The Toshiba Portege 4000 _CRS reports the FIR region first,
* followed by the SIR region. The BIOS will configure the bridge,
* but only if we call _SRS with SIR first, then FIR. It also
* reports the IRQ as active high, when it is really active low.
*/
dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; "
"swapping SIR/FIR and reconfiguring\n",
(unsigned long) pnp_port_start(dev, 0),
(unsigned long) pnp_port_start(dev, 1));
/*
* Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign
* these resources any more.
*/
fir = dev->res.port_resource[0];
sir = dev->res.port_resource[1];
fir.flags &= ~IORESOURCE_AUTO;
sir.flags &= ~IORESOURCE_AUTO;
irq = dev->res.irq_resource[0];
irq.flags &= ~IORESOURCE_AUTO;
irq.flags &= ~IORESOURCE_BITS;
irq.flags |= IORESOURCE_IRQ_LOWEDGE;
pnp_disable_dev(dev);
dev->res.port_resource[0] = sir;
dev->res.port_resource[1] = fir;
dev->res.irq_resource[0] = irq;
pnp_activate_dev(dev);
if (quirk_smc_fir_enabled(dev)) {
dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
(unsigned long) pnp_port_start(dev, 0),
(unsigned long) pnp_port_start(dev, 1));
return;
}
dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
"email bjorn.helgaas@hp.com\n");
}