diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt new file mode 100644 index 000000000000..f3d44984d91c --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt @@ -0,0 +1,42 @@ +SPEAr cpufreq driver +------------------- + +SPEAr SoC cpufreq driver for CPU frequency scaling. +It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems +which share clock across all CPUs. + +Required properties: +- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the + increasing order. + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, in + unit of nanoseconds. + +Both required and optional properties listed above must be defined under node +/cpus/cpu@0. + +Examples: +-------- +cpus { + + <...> + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + + <...> + + cpufreq_tbl = < 166000 + 200000 + 250000 + 300000 + 400000 + 500000 + 600000 >; + }; + + <...> + +}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ade7e924bef5..159e99737e31 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -904,6 +904,7 @@ config ARCH_NOMADIK config PLAT_SPEAR bool "ST SPEAr" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 5961e6415f08..a0b3661d90b0 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -76,3 +76,10 @@ config ARM_EXYNOS5250_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. + +config ARM_SPEAR_CPUFREQ + bool "SPEAr CPUFreq support" + depends on PLAT_SPEAR + default y + help + This adds the CPUFreq driver support for SPEAr SOCs. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 5b1413e47216..1f254ec087c1 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o +obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o ################################################################################## # PowerPC platform drivers diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c new file mode 100644 index 000000000000..4575cfe41755 --- /dev/null +++ b/drivers/cpufreq/spear-cpufreq.c @@ -0,0 +1,291 @@ +/* + * drivers/cpufreq/spear-cpufreq.c + * + * CPU Frequency Scaling for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Deepak Sikri + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr CPUFreq driver data structure */ +static struct { + struct clk *clk; + unsigned int transition_latency; + struct cpufreq_frequency_table *freq_tbl; + u32 cnt; +} spear_cpufreq; + +int spear_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl); +} + +static unsigned int spear_cpufreq_get(unsigned int cpu) +{ + return clk_get_rate(spear_cpufreq.clk) / 1000; +} + +static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq) +{ + struct clk *sys_pclk; + int pclk; + /* + * In SPEAr1340, cpu clk's parent sys clk can take input from + * following sources + */ + const char *sys_clk_src[] = { + "sys_syn_clk", + "pll1_clk", + "pll2_clk", + "pll3_clk", + }; + + /* + * As sys clk can have multiple source with their own range + * limitation so we choose possible sources accordingly + */ + if (newfreq <= 300000000) + pclk = 0; /* src is sys_syn_clk */ + else if (newfreq > 300000000 && newfreq <= 500000000) + pclk = 3; /* src is pll3_clk */ + else if (newfreq == 600000000) + pclk = 1; /* src is pll1_clk */ + else + return ERR_PTR(-EINVAL); + + /* Get parent to sys clock */ + sys_pclk = clk_get(NULL, sys_clk_src[pclk]); + if (IS_ERR(sys_pclk)) + pr_err("Failed to get %s clock\n", sys_clk_src[pclk]); + + return sys_pclk; +} + +/* + * In SPEAr1340, we cannot use newfreq directly because we need to actually + * access a source clock (clk) which might not be ancestor of cpu at present. + * Hence in SPEAr1340 we would operate on source clock directly before switching + * cpu clock to it. + */ +static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq) +{ + struct clk *sys_clk; + int ret = 0; + + sys_clk = clk_get_parent(spear_cpufreq.clk); + if (IS_ERR(sys_clk)) { + pr_err("failed to get cpu's parent (sys) clock\n"); + return PTR_ERR(sys_clk); + } + + /* Set the rate of the source clock before changing the parent */ + ret = clk_set_rate(sys_pclk, newfreq); + if (ret) { + pr_err("Failed to set sys clk rate to %lu\n", newfreq); + return ret; + } + + ret = clk_set_parent(sys_clk, sys_pclk); + if (ret) { + pr_err("Failed to set sys clk parent\n"); + return ret; + } + + return 0; +} + +static int spear_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + unsigned long newfreq; + struct clk *srcclk; + int index, ret, mult = 1; + + if (cpufreq_frequency_table_target(policy, spear_cpufreq.freq_tbl, + target_freq, relation, &index)) + return -EINVAL; + + freqs.cpu = policy->cpu; + freqs.old = spear_cpufreq_get(0); + + newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000; + if (of_machine_is_compatible("st,spear1340")) { + /* + * SPEAr1340 is special in the sense that due to the possibility + * of multiple clock sources for cpu clk's parent we can have + * different clock source for different frequency of cpu clk. + * Hence we need to choose one from amongst these possible clock + * sources. + */ + srcclk = spear1340_cpu_get_possible_parent(newfreq); + if (IS_ERR(srcclk)) { + pr_err("Failed to get src clk\n"); + return PTR_ERR(srcclk); + } + + /* SPEAr1340: src clk is always 2 * intended cpu clk */ + mult = 2; + } else { + /* + * src clock to be altered is ancestor of cpu clock. Hence we + * can directly work on cpu clk + */ + srcclk = spear_cpufreq.clk; + } + + newfreq = clk_round_rate(srcclk, newfreq * mult); + if (newfreq < 0) { + pr_err("clk_round_rate failed for cpu src clock\n"); + return newfreq; + } + + freqs.new = newfreq / 1000; + freqs.new /= mult; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + if (mult == 2) + ret = spear1340_set_cpu_rate(srcclk, newfreq); + else + ret = clk_set_rate(spear_cpufreq.clk, newfreq); + + /* Get current rate after clk_set_rate, in case of failure */ + if (ret) { + pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret); + freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + return ret; +} + +static int spear_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret; + + ret = cpufreq_frequency_table_cpuinfo(policy, spear_cpufreq.freq_tbl); + if (ret) { + pr_err("cpufreq_frequency_table_cpuinfo() failed"); + return ret; + } + + cpufreq_frequency_table_get_attr(spear_cpufreq.freq_tbl, policy->cpu); + policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency; + policy->cur = spear_cpufreq_get(0); + + cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu)); + cpumask_copy(policy->related_cpus, policy->cpus); + + return 0; +} + +static int spear_cpufreq_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *spear_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver spear_cpufreq_driver = { + .name = "cpufreq-spear", + .flags = CPUFREQ_STICKY, + .verify = spear_cpufreq_verify, + .target = spear_cpufreq_target, + .get = spear_cpufreq_get, + .init = spear_cpufreq_init, + .exit = spear_cpufreq_exit, + .attr = spear_cpufreq_attr, +}; + +static int spear_cpufreq_driver_init(void) +{ + struct device_node *np; + const struct property *prop; + struct cpufreq_frequency_table *freq_tbl; + const __be32 *val; + int cnt, i, ret; + + np = of_find_node_by_path("/cpus/cpu@0"); + if (!np) { + pr_err("No cpu node found"); + return -ENODEV; + } + + if (of_property_read_u32(np, "clock-latency", + &spear_cpufreq.transition_latency)) + spear_cpufreq.transition_latency = CPUFREQ_ETERNAL; + + prop = of_find_property(np, "cpufreq_tbl", NULL); + if (!prop || !prop->value) { + pr_err("Invalid cpufreq_tbl"); + ret = -ENODEV; + goto out_put_node; + } + + cnt = prop->length / sizeof(u32); + val = prop->value; + + freq_tbl = kmalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL); + if (!freq_tbl) { + ret = -ENOMEM; + goto out_put_node; + } + + for (i = 0; i < cnt; i++) { + freq_tbl[i].index = i; + freq_tbl[i].frequency = be32_to_cpup(val++); + } + + freq_tbl[i].index = i; + freq_tbl[i].frequency = CPUFREQ_TABLE_END; + + spear_cpufreq.freq_tbl = freq_tbl; + + of_node_put(np); + + spear_cpufreq.clk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(spear_cpufreq.clk)) { + pr_err("Unable to get CPU clock\n"); + ret = PTR_ERR(spear_cpufreq.clk); + goto out_put_mem; + } + + ret = cpufreq_register_driver(&spear_cpufreq_driver); + if (!ret) + return 0; + + pr_err("failed register driver: %d\n", ret); + clk_put(spear_cpufreq.clk); + +out_put_mem: + kfree(freq_tbl); + return ret; + +out_put_node: + of_node_put(np); + return ret; +} +late_initcall(spear_cpufreq_driver_init); + +MODULE_AUTHOR("Deepak Sikri "); +MODULE_DESCRIPTION("SPEAr CPUFreq driver"); +MODULE_LICENSE("GPL");