dt-bindings: display: add Amlogic Meson DRM Bindings
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
parent
bbbe775ec5
commit
42a7119b51
112
Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
Normal file
112
Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
Normal file
|
@ -0,0 +1,112 @@
|
|||
Amlogic Meson Display Controller
|
||||
================================
|
||||
|
||||
The Amlogic Meson Display controller is composed of several components
|
||||
that are going to be documented below:
|
||||
|
||||
DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
|
||||
| vd1 _______ _____________ _________________ | |
|
||||
D |-------| |----| | | | | HDMI PLL |
|
||||
D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK |
|
||||
R |-------| |----| Processing | | | | |
|
||||
| osd2 | | | |---| Enci ----------|----|-----VDAC------|
|
||||
R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----|
|
||||
A | osd1 | | | Blenders | | Encl ----------|----|---------------|
|
||||
M |-------|______|----|____________| |________________| | |
|
||||
___|__________________________________________________________|_______________|
|
||||
|
||||
|
||||
VIU: Video Input Unit
|
||||
---------------------
|
||||
|
||||
The Video Input Unit is in charge of the pixel scanout from the DDR memory.
|
||||
It fetches the frames addresses, stride and parameters from the "Canvas" memory.
|
||||
This part is also in charge of the CSC (Colorspace Conversion).
|
||||
It can handle 2 OSD Planes and 2 Video Planes.
|
||||
|
||||
VPP: Video Post Processing
|
||||
--------------------------
|
||||
|
||||
The Video Post Processing is in charge of the scaling and blending of the
|
||||
various planes into a single pixel stream.
|
||||
There is a special "pre-blending" used by the video planes with a dedicated
|
||||
scaler and a "post-blending" to merge with the OSD Planes.
|
||||
The OSD planes also have a dedicated scaler for one of the OSD.
|
||||
|
||||
VENC: Video Encoders
|
||||
--------------------
|
||||
|
||||
The VENC is composed of the multiple pixel encoders :
|
||||
- ENCI : Interlace Video encoder for CVBS and Interlace HDMI
|
||||
- ENCP : Progressive Video Encoder for HDMI
|
||||
- ENCL : LCD LVDS Encoder
|
||||
The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
|
||||
tree and provides the scanout clock to the VPP and VIU.
|
||||
The ENCI is connected to a single VDAC for Composite Output.
|
||||
The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
|
||||
|
||||
Device Tree Bindings:
|
||||
---------------------
|
||||
|
||||
VPU: Video Processing Unit
|
||||
--------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: value should be different for each SoC family as :
|
||||
- GXBB (S905) : "amlogic,meson-gxbb-vpu"
|
||||
- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
|
||||
- GXM (S912) : "amlogic,meson-gxm-vpu"
|
||||
followed by the common "amlogic,meson-gx-vpu"
|
||||
- reg: base address and size of he following memory-mapped regions :
|
||||
- vpu
|
||||
- hhi
|
||||
- dmc
|
||||
- reg-names: should contain the names of the previous memory regions
|
||||
- interrupts: should contain the VENC Vsync interrupt number
|
||||
|
||||
Required nodes:
|
||||
|
||||
The connections to the VPU output video ports are modeled using the OF graph
|
||||
bindings specified in Documentation/devicetree/bindings/graph.txt.
|
||||
|
||||
The following table lists for each supported model the port number
|
||||
corresponding to each VPU output.
|
||||
|
||||
Port 0 Port 1
|
||||
-----------------------------------------
|
||||
S905 (GXBB) CVBS VDAC HDMI-TX
|
||||
S905X (GXL) CVBS VDAC HDMI-TX
|
||||
S905D (GXL) CVBS VDAC HDMI-TX
|
||||
S912 (GXM) CVBS VDAC HDMI-TX
|
||||
|
||||
Example:
|
||||
|
||||
tv-connector {
|
||||
compatible = "composite-video-connector";
|
||||
|
||||
port {
|
||||
tv_connector_in: endpoint {
|
||||
remote-endpoint = <&cvbs_vdac_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vpu: vpu@d0100000 {
|
||||
compatible = "amlogic,meson-gxbb-vpu";
|
||||
reg = <0x0 0xd0100000 0x0 0x100000>,
|
||||
<0x0 0xc883c000 0x0 0x1000>,
|
||||
<0x0 0xc8838000 0x0 0x1000>;
|
||||
reg-names = "vpu", "hhi", "dmc";
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* CVBS VDAC output port */
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&tv_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
Loading…
Reference in a new issue