redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

Documentation: add DT bindings for ARM SCPI power domains 

The System Control Processor (SCP) provides peripheral devices with
power domains that can be enabled and disabled viathe System Control
and Power Interface (SCPI) Message Protocol. Add bindings to allow
probing of these device power domians.

Cc: Rob Herring <robh+dt@kernel.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
steinar/wifi_calib_4_9_kernel
Sudeep Holla 2016-06-05 18:50:50 +01:00
parent 37a441dcd5
commit 43752b8d79
1 changed files with 34 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
Documentation/devicetree/bindings/arm/arm,scpi.txt
View File

@ -87,10 +87,33 @@ Required properties:
implementation for the IDs to use. For Juno
R0 and Juno R1 refer to [3].
Power domain bindings for the power domains based on SCPI Message Protocol
------------------------------------------------------------
This binding uses the generic power domain binding[4].
PM domain providers
===================
Required properties:
- #power-domain-cells : Should be 1. Contains the device or the power
domain ID value used by SCPI commands.
- num-domains: Total number of power domains provided by SCPI. This is
needed as the SCPI message protocol lacks a mechanism to
query this information at runtime.
PM domain consumers
===================
Required properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/thermal/thermal.txt
[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
[4] Documentation/devicetree/bindings/power/power_domain.txt
Example:
@ -144,6 +167,12 @@ scpi_protocol: scpi@2e000000 {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
scpi_devpd: scpi-power-domains {
compatible = "arm,scpi-power-domains";
num-domains = <2>;
#power-domain-cells = <1>;
};
};
cpu@0 {
@ -156,6 +185,7 @@ hdlcd@7ff60000 {
...
reg = <0 0x7ff60000 0 0x1000>;
clocks = <&scpi_clk 4>;
power-domains = <&scpi_devpd 1>;
};
thermal-zones {
@ -186,3 +216,7 @@ The thermal-sensors property in the soc_thermal node uses the
temperature sensor provided by SCP firmware to setup a thermal
zone. The ID "3" is the sensor identifier for the temperature sensor
as used by the firmware.
The num-domains property in scpi-power-domains domain specifies that
SCPI provides 2 power domains. The hdlcd node uses the power domain with
domain ID 1.