spi: Initialize cs_gpio and cs_gpios with -ENOENT

The return value from of_get_named_gpio is -ENOENT when the given index
matches a hole in the "cs-gpios" property phandle list. However, the
default value of cs_gpio in struct spi_device and entries of cs_gpios in
struct spi_master is -EINVAL, which is documented to indicate that a
GPIO line should not be used for the given spi_device.

This sets the default value of cs_gpio in struct spi_device and entries
of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only
value used to indicate that no GPIO line should be used.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Andreas Larsson 2013-02-13 14:20:25 +01:00 committed by Grant Likely
parent 3d3522604a
commit 446411e18b
2 changed files with 4 additions and 4 deletions

View file

@ -334,7 +334,7 @@ struct spi_device *spi_alloc_device(struct spi_master *master)
spi->dev.parent = &master->dev;
spi->dev.bus = &spi_bus_type;
spi->dev.release = spidev_release;
spi->cs_gpio = -EINVAL;
spi->cs_gpio = -ENOENT;
device_initialize(&spi->dev);
return spi;
}
@ -1079,7 +1079,7 @@ static int of_spi_register_master(struct spi_master *master)
return -ENOMEM;
for (i = 0; i < master->num_chipselect; i++)
cs[i] = -EINVAL;
cs[i] = -ENOENT;
for (i = 0; i < nb; i++)
cs[i] = of_get_named_gpio(np, "cs-gpios", i);

View file

@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type;
* @modalias: Name of the driver to use with this device, or an alias
* for that name. This appears in the sysfs "modalias" attribute
* for driver coldplugging, and in uevents used for hotplugging
* @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when
* @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when
* when not using a GPIO line)
*
* A @spi_device is used to interchange data between an SPI slave
@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -EINVAL for CS lines that
* number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
*
* Each SPI master controller can communicate with one or more @spi_device