redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge commit 'v3.3' into fbdev-next

wifi-calibration
Florian Tobias Schandinat 2012-03-20 18:59:50 +00:00
parent e9fe8a714e c16fa4f2ad
commit 44e8ba93cf
319 changed files with 3366 additions and 3628 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/devicetree/bindings/gpio/led.txt
View File

@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each
node's name represents the name of the corresponding LED.
LED sub-node properties:
- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
for devices" in Documentation/devicetree/booting-without-of.txt. Active
low LEDs should be indicated using flags in the GPIO specifier.
- gpios : Should specify the LED's GPIO, see "gpios property" in
Documentation/devicetree/gpio.txt. Active low LEDs should be
indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
- linux,default-trigger : (optional) This parameter, if present, is a

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -30,6 +30,7 @@ national National Semiconductor
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
picochip Picochip Ltd
powervr Imagination Technologies
qcom Qualcomm, Inc.
ramtron Ramtron International

26
Documentation/hwmon/jc42
View File

@ -7,21 +7,29 @@ Supported chips:
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
* IDT TSE2002B3, TS3000B3
Prefix: 'tse2002b3', 'ts3000b3'
* Atmel AT30TS00
Prefix: 'at30ts00'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.idt.com/products/getdoc.cfm?docid=18715691
http://www.idt.com/products/getdoc.cfm?docid=18715692
http://www.atmel.com/Images/doc8585.pdf
* IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
Prefix: 'tse2002', 'ts3000'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
* Maxim MAX6604
Prefix: 'max6604'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
* Microchip MCP9805, MCP98242, MCP98243, MCP9843
Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
* Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@ -48,6 +56,12 @@ Supported chips:
Datasheets:
http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
* ST Microelectronics STTS2002, STTS3000
Prefix: 'stts2002', 'stts3000'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f

9
Documentation/hwmon/w83627ehf
View File

@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
as Winbond chips.
The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
(except for 627UHG), alarms with beep warnings (control unimplemented),
and some automatic fan regulation strategies (plus manual fan control mode).
@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature
pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch
corresponding fan off. (when the temperature was below
defined range).
pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up
pwm[1-4]_step_output- rate of fan speed change (1 - 255)
pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down
pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature
is above defined range.
Note: last two functions are influenced by other control bits, not yet exported
Note: last six functions are influenced by other control bits, not yet exported
by the driver, so a change might not have any effect.
Implementation Details

14
Documentation/hwmon/zl6100
View File

@ -88,14 +88,12 @@ Module parameters
delay
-----
Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
1 ms appears to be sufficient and has not caused any problems in testing.
The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
except for ZL2004 and ZL6105. To enable manual override, the driver provides a
writeable module parameter, 'delay', which can be used to set the interval to
a value between 0 and 65,535 microseconds.
Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
appears to be sufficient and has not caused any problems in testing. The problem
is known to affect all currently supported chips. For manual override, the
driver provides a writeable module parameter, 'delay', which can be used to set
the interval to a value between 0 and 65,535 microseconds.
Sysfs entries

3
Documentation/input/alps.txt
View File

@ -13,7 +13,8 @@ Detection
All ALPS touchpads should respond to the "E6 report" command sequence:
E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
00-00-64.
00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
if some buttons are pressed.
If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

6
Documentation/kernel-parameters.txt
View File

@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
default: off.
printk.always_kmsg_dump=
Trigger kmsg_dump for cases other than kernel oops or
panics
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
default: disabled
printk.time= Show timing data prefixed to each printk message line
Format: <bool> (1/Y/y=enable, 0/N/n=disable)

52
MAINTAINERS
View File

@ -962,7 +962,7 @@ F: drivers/tty/serial/msm_serial.c
F: drivers/platform/msm/
F: drivers/*/pm8???-*
F: include/linux/mfd/pm8xxx/
T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
@ -1310,7 +1310,7 @@ F: drivers/atm/
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
@ -1318,7 +1318,7 @@ S: Maintained
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
@ -1513,19 +1513,23 @@ F: drivers/mtd/devices/block2mtd.c
BLUETOOTH DRIVERS
M: Marcel Holtmann <marcel@holtmann.org>
M: "Gustavo F. Padovan" <padovan@profusion.mobi>
M: Gustavo Padovan <gustavo@padovan.org>
M: Johan Hedberg <johan.hedberg@gmail.com>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
S: Maintained
F: drivers/bluetooth/
BLUETOOTH SUBSYSTEM
M: Marcel Holtmann <marcel@holtmann.org>
M: "Gustavo F. Padovan" <padovan@profusion.mobi>
M: Gustavo Padovan <gustavo@padovan.org>
M: Johan Hedberg <johan.hedberg@gmail.com>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
S: Maintained
F: net/bluetooth/
F: include/net/bluetooth/
@ -1717,6 +1721,14 @@ F: include/linux/can/error.h
F: include/linux/can/netlink.h
F: include/linux/can/platform/
CAPABILITIES
M: Serge Hallyn <serge.hallyn@canonical.com>
L: linux-security-module@vger.kernel.org
S: Supported
F: include/linux/capability.h
F: security/capability.c
F: security/commoncap.c
CELL BROADBAND ENGINE ARCHITECTURE
M: Arnd Bergmann <arnd@arndb.de>
L: linuxppc-dev@lists.ozlabs.org
@ -2360,6 +2372,15 @@ S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
EXYNOS MIPI DISPLAY DRIVERS
M: Inki Dae <inki.dae@samsung.com>
M: Donghwa Lee <dh09.lee@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/exynos/exynos_mipi*
F: include/video/exynos_mipi*
DSCC4 DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
@ -2869,6 +2890,12 @@ S: Maintained
F: drivers/media/video/m5mols/
F: include/media/m5mols.h
FUJITSU TABLET EXTRAS
M: Robert Gerlach <khnz@gmx.de>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/fujitsu-tablet.c
FUSE: FILESYSTEM IN USERSPACE
M: Miklos Szeredi <miklos@szeredi.hu>
L: fuse-devel@lists.sourceforge.net
@ -5877,6 +5904,7 @@ F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-spear.c
@ -6219,24 +6247,32 @@ F: drivers/tty/serial/sunzilog.h
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/
SPEAR3XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear3xx/
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/mach-spear*/clock.c
@ -6245,6 +6281,8 @@ F: arch/arm/plat-spear/include/plat/clock.h
SPEAR PAD MULTIPLEXING SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
F: arch/arm/plat-spear/include/plat/padmux.h

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION =
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

2
arch/alpha/include/asm/futex.h
View File

@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" lda $31,3b-2b(%0)\n"
" .previous\n"
: "+r"(ret), "=&r"(prev), "=&r"(cmp)
: "r"(uaddr), "r"((long)oldval), "r"(newval)
: "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
: "memory");
*uval = prev;

2
arch/arm/Kconfig
View File

@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
depends on CPU_V7
help
This option enables the workaround for the 743622 Cortex-A9
(r2p0..r2p2) erratum. Under very rare conditions, a faulty
(r2p*) erratum. Under very rare conditions, a faulty
optimisation in the Cortex-A9 Store Buffer may lead to data
corruption. This workaround sets a specific bit in the diagnostic
register of the Cortex-A9 which disables the Store Buffer

1
arch/arm/boot/.gitignore vendored
View File

@ -3,3 +3,4 @@ zImage
xipImage
bootpImage
uImage
*.dtb

2
arch/arm/include/asm/pmu.h
View File

@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
u64 armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow);
int idx);
int armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,

1
arch/arm/kernel/ecard.c
View File

@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
vma.vm_flags = VM_EXEC;
vma.vm_mm = mm;
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

45
arch/arm/kernel/perf_event.c
View File

@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
int idx)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
@ -193,13 +193,7 @@ again:
new_raw_count) != prev_raw_count)
goto again;
new_raw_count &= armpmu->max_period;
prev_raw_count &= armpmu->max_period;
if (overflow)
delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
else
delta = new_raw_count - prev_raw_count;
delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
if (hwc->idx < 0)
return;
armpmu_event_update(event, hwc, hwc->idx, 0);
armpmu_event_update(event, hwc, hwc->idx);
}
static void
@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(hwc, hwc->idx);
barrier(); /* why? */
armpmu_event_update(event, hwc, hwc->idx, 0);
armpmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
/*
* For non-sampling runs, limit the sample_period to half
* of the counter width. That way, the new counter value
* is far less likely to overtake the previous one unless
* you have some serious IRQ latency issues.
*/
hwc->sample_period = armpmu->max_period >> 1;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
armpmu->type = ARM_PMU_DEVICE_CPU;
}
/*
* PMU hardware loses all context when a CPU goes offline.
* When a CPU is hotplugged back in, since some hardware registers are
* UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
* junk values out of them.
*/
static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
unsigned long action, void *hcpu)
{
if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
return NOTIFY_DONE;
if (cpu_pmu && cpu_pmu->reset)
cpu_pmu->reset(NULL);
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
.notifier_call = pmu_cpu_notify,
};
/*
* CPU PMU identification and registration.
*/
@ -730,6 +752,7 @@ init_hw_perf_events(void)
pr_info("enabled with %s PMU driver, %d counters available\n",
cpu_pmu->name, cpu_pmu->num_events);
cpu_pmu_init(cpu_pmu);
register_cpu_notifier(&pmu_cpu_notifier);
armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");

22
arch/arm/kernel/perf_event_v6.c
View File

@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int counter_is_active(unsigned long pmcr, int idx)
{
unsigned long mask = 0;
if (idx == ARMV6_CYCLE_COUNTER)
mask = ARMV6_PMCR_CCOUNT_IEN;
else if (idx == ARMV6_COUNTER0)
mask = ARMV6_PMCR_COUNT0_IEN;
else if (idx == ARMV6_COUNTER1)
mask = ARMV6_PMCR_COUNT1_IEN;
if (mask)
return pmcr & mask;
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
return 0;
}
static irqreturn_t
armv6pmu_handle_irq(int irq_num,
void *dev)
@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!counter_is_active(pmcr, idx))
/* Ignore if we don't have an event. */
if (!event)
continue;
/*
@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;

11
arch/arm/kernel/perf_event_v7.c
View File

@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
isb();
/* Clear the overflow flag in case an interrupt is pending. */
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
isb();
return idx;
}
@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
/* Ignore if we don't have an event. */
if (!event)
continue;
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;

20
arch/arm/kernel/perf_event_xscale.c
View File

@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!event)
continue;
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
if (!event)
continue;
if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
unsigned long flags, ien, evtsel, of_flags;
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
switch (idx) {
case XSCALE_CYCLE_COUNTER:
ien &= ~XSCALE2_CCOUNT_INT_EN;
of_flags = XSCALE2_CCOUNT_OVERFLOW;
break;
case XSCALE_COUNTER0:
ien &= ~XSCALE2_COUNT0_INT_EN;
evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
of_flags = XSCALE2_COUNT0_OVERFLOW;
break;
case XSCALE_COUNTER1:
ien &= ~XSCALE2_COUNT1_INT_EN;
evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
of_flags = XSCALE2_COUNT1_OVERFLOW;
break;
case XSCALE_COUNTER2:
ien &= ~XSCALE2_COUNT2_INT_EN;
evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
of_flags = XSCALE2_COUNT2_OVERFLOW;
break;
case XSCALE_COUNTER3:
ien &= ~XSCALE2_COUNT3_INT_EN;
evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
of_flags = XSCALE2_COUNT3_OVERFLOW;
break;
default:
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
xscale2pmu_write_overflow_flags(of_flags);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}

19
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -38,10 +38,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 8,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.name = "at91sam9g45_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
#if defined(CONFIG_OF)
struct device_node *of_node =
of_find_node_by_name(NULL, "dma-controller");
if (of_node)
of_node_put(of_node);
else
#endif
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}

8
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -33,10 +33,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 2,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DMA,
@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.name = "at91sam9rl_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else

2
arch/arm/mach-ep93xx/vision_ep9307.c
View File

@ -34,6 +34,7 @@
#include <mach/ep93xx_spi.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
.restart = ep93xx_restart,

2
arch/arm/mach-exynos/mach-universal_c210.c
View File

@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
static struct i2c_board_info i2c3_devs[] __initdata = {

1
arch/arm/mach-omap2/id.c
View File

@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
break;
case 0xb8f2:
switch (rev) {
case 0:

3
arch/arm/mach-omap2/mailbox.c
View File

@ -420,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
platform_driver_unregister(&omap2_mbox_driver);
}
/* must be ready before omap3isp is probed */
subsys_initcall(omap2_mbox_init);
module_init(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");

3
arch/arm/mach-omap2/omap-iommu.c
View File

@ -150,7 +150,8 @@ err_out:
platform_device_put(omap_iommu_pdev[i]);
return err;
}
module_init(omap_iommu_init);
/* must be ready before omap3isp is probed */
subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{

2
arch/arm/mach-omap2/omap4-common.c
View File

@ -31,6 +31,7 @@
#include "common.h"
#include "omap4-sar-layout.h"
#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
@ -55,6 +56,7 @@ void omap_bus_sync(void)
isb();
}
}
EXPORT_SYMBOL(omap_bus_sync);
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)

1
arch/arm/mach-omap2/twl-common.c
View File

@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE

1
arch/arm/mach-pxa/generic.h
View File

@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
#endif
extern struct syscore_ops pxa_irq_syscore_ops;
extern struct syscore_ops pxa_gpio_syscore_ops;
extern struct syscore_ops pxa2xx_mfp_syscore_ops;
extern struct syscore_ops pxa3xx_mfp_syscore_ops;

7
arch/arm/mach-pxa/mfp-pxa2xx.c
View File

@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
{
int i;
/* running before pxa_gpio_probe() */
#ifdef CONFIG_CPU_PXA26x
pxa_last_gpio = 89;
#else
pxa_last_gpio = 84;
#endif
for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
{
int i, gpio;
pxa_last_gpio = 120; /* running before pxa_gpio_probe() */
for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration

2
arch/arm/mach-pxa/pxa25x.c
View File

@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
static struct clk_lookup pxa25x_hwuart_clkreg =
@ -367,7 +368,6 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(pxa25x_devices,

2
arch/arm/mach-pxa/pxa27x.c
View File

@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
#ifdef CONFIG_PM
@ -455,7 +456,6 @@ static int __init pxa27x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/pxa3xx.c
View File

@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/pxa95x.c
View File

@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

2
arch/arm/mach-s3c2440/common.h
View File

@ -12,6 +12,6 @@
#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
#define __ARCH_ARM_MACH_S3C2440_COMMON_H
void s3c2440_restart(char mode, const char *cmd);
void s3c244x_restart(char mode, const char *cmd);
#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

2
arch/arm/mach-s3c2440/mach-anubis.c
View File

@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-at2440evb.c
View File

@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-gta02.c
View File

@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-mini2440.c
View File

@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-nexcoder.c
View File

@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-osiris.c
View File

@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-rx1950.c
View File

@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-rx3715.c
View File

@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c2440/mach-smdk2440.c
View File

@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

13
arch/arm/mach-s3c2440/s3c2440.c
View File

@ -35,7 +35,6 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
void s3c2440_restart(char mode, const char *cmd)
{
if (mode == 's') {
soft_restart(0);
}
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}

12
arch/arm/mach-s3c2440/s3c244x.c
View File

@ -46,6 +46,7 @@
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
.suspend = s3c244x_suspend,
.resume = s3c244x_resume,
};
void s3c244x_restart(char mode, const char *cmd)
{
if (mode == 's')
soft_restart(0);
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}

1
arch/arm/mach-shmobile/board-ag5evm.c
View File

@ -38,6 +38,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>

2
arch/arm/mach-shmobile/board-ap4evb.c
View File

@ -801,7 +801,7 @@ static struct fsi_ak4642_info fsi2_ak4643_info = {
static struct platform_device fsi_ak4643_device = {
.name = "fsi-ak4642-audio",
.dev = {
.platform_data = &fsi_info,
.platform_data = &fsi2_ak4643_info,
},
};

3
arch/arm/mach-shmobile/board-bonito.c
View File

@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/videodev2.h>
#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -241,7 +242,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = RGB24,
.clock_divider = 5,
.flags = 0,

4
arch/arm/mach-shmobile/board-mackerel.c
View File

@ -1346,6 +1346,10 @@ static struct map_desc mackerel_io_desc[] __initdata = {
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
/* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
* enough to allocate the frame buffer memory.
*/
init_consistent_dma_size(12 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();

2
arch/arm/mach-ux500/Kconfig
View File

@ -5,7 +5,7 @@ config UX500_SOC_COMMON
default y
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select ARM_ERRATA_754322
select ARM_ERRATA_764369

2
arch/arm/mach-vexpress/Kconfig
View File

@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
select ARM_GIC
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0

4
arch/arm/mm/proc-v7.S
View File

@ -230,9 +230,7 @@ __v7_setup:
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register

10
arch/arm/plat-omap/include/plat/irqs.h
View File

@ -428,8 +428,16 @@
#define OMAP_GPMC_NR_IRQS 8
#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
/* PRCM IRQ handler */
#ifdef CONFIG_ARCH_OMAP2PLUS
#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
#define OMAP_PRCM_NR_IRQS 64
#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
#else
#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
#endif
#define NR_IRQS OMAP_GPMC_IRQ_END
#define NR_IRQS OMAP_PRCM_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))

2
arch/arm/plat-s3c24xx/dma.c
View File

@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
int channel;
for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
s3c2410_dma_resume_chan(cp);
}

2
arch/arm/plat-samsung/devs.c
View File

@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
#ifdef CONFIG_S3C_DEV_USB_HSOTG
static struct resource s3c_usb_hsotg_resources[] = {
[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
[1] = DEFINE_RES_IRQ(IRQ_OTG),
};

6
arch/arm/plat-spear/time.c
View File

@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
static int clockevent_next_event(unsigned long cycles,
struct clock_event_device *clk_event_dev)
{
u16 val;
u16 val = readw(gpt_base + CR(CLKEVT));
if (val & CTRL_ENABLE)
writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
writew(cycles, gpt_base + LOAD(CLKEVT));
val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ENABLE | CTRL_INT_ENABLE;
writew(val, gpt_base + CR(CLKEVT));

4
arch/c6x/include/asm/processor.h
View File

@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
extern unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) (task_pt_regs(task)->pc)
#define KSTK_ESP(tsk) (task_pt_regs(task)->sp)
#define KSTK_EIP(task) (task_pt_regs(task)->pc)
#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#define cpu_relax() do { } while (0)

27
arch/c6x/kernel/entry.S
View File

@ -717,33 +717,6 @@ ENTRY(sys_ftruncate64_c6x)
#endif
ENDPROC(sys_ftruncate64_c6x)
#ifdef __ARCH_WANT_SYSCALL_OFF_T
;; On Entry
;; A4 - fd
;; B4 - offset_lo (LE), offset_hi (BE)
;; A6 - offset_lo (BE), offset_hi (LE)
;; B6 - len
;; A8 - advice
ENTRY(sys_fadvise64_c6x)
#ifdef CONFIG_C6X_BIG_KERNEL
MVKL .S1 sys_fadvise64,A0
MVKH .S1 sys_fadvise64,A0
BNOP .S2X A0,2
#else
B .S2 sys_fadvise64
NOP 2
#endif
#ifdef CONFIG_CPU_BIG_ENDIAN
MV .L2 B4,B5
|| MV .D2X A6,B4
#else
MV .D2X A6,B5
#endif
MV .D1X B6,A6
MV .D2X A8,B6
#endif
ENDPROC(sys_fadvise64_c6x)
;; On Entry
;; A4 - fd
;; B4 - offset_lo (LE), offset_hi (BE)

2
arch/mips/alchemy/common/time.c
View File

@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */
clockevents_register_device(cd);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);

2
arch/mips/ath79/dev-wmac.c
View File

@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
{
if (soc_is_ar913x())
ar913x_wmac_setup();
if (soc_is_ar933x())
else if (soc_is_ar933x())
ar933x_wmac_setup();
else
BUG();

4
arch/mips/configs/nlm_xlp_defconfig
View File

@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
# CONFIG_SECCOMP is not set
CONFIG_USE_OF=y
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="mips-linux-gnu-"
CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -22,7 +22,7 @@ CONFIG_AUDIT=y
CONFIG_CGROUPS=y
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_LZMA=y

4
arch/mips/configs/nlm_xlr_defconfig
View File

@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_KEXEC=y
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="mips-linux-gnu-"
CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -22,7 +22,7 @@ CONFIG_AUDIT=y
CONFIG_NAMESPACES=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_GZIP=y

2
arch/mips/configs/powertv_defconfig
View File

@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="mips-linux-"
CONFIG_CROSS_COMPILE=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=16

20
arch/mips/include/asm/mach-au1x00/gpio-au1300.h
View File

@ -11,6 +11,9 @@
#include <asm/io.h>
#include <asm/mach-au1x00/au1000.h>
struct gpio;
struct gpio_chip;
/* with the current GPIC design, up to 128 GPIOs are possible.
* The only implementation so far is in the Au1300, which has 75 externally
* available GPIOs.
@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
return 0;
}
static inline void gpio_free(unsigned int gpio)
static inline int gpio_request_one(unsigned gpio,
unsigned long flags, const char *label)
{
return 0;
}
static inline int gpio_request_array(struct gpio *array, size_t num)
{
return 0;
}
static inline void gpio_free(unsigned gpio)
{
}
static inline void gpio_free_array(struct gpio *array, size_t num)
{
}

3
arch/mips/include/asm/page.h
View File

@ -39,9 +39,6 @@
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
#else /* !CONFIG_HUGETLB_PAGE */
# ifndef BUILD_BUG
# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
# endif
#define HPAGE_SHIFT ({BUILD_BUG(); 0; })
#define HPAGE_SIZE ({BUILD_BUG(); 0; })
#define HPAGE_MASK ({BUILD_BUG(); 0; })

1
arch/mips/kernel/smp-bmips.c
View File

@ -8,7 +8,6 @@
* SMP support for BMIPS
*/
#include <linux/version.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>

2
arch/mips/kernel/traps.c
View File

@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
printk(KERN_DEBUG "YIELD Scheduler Exception\n");
break;
case 5:
printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
break;
default:
printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",

1
arch/mips/kernel/vmlinux.lds.S
View File

@ -69,7 +69,6 @@ SECTIONS
RODATA
/* writeable */
_sdata = .; /* Start of data section */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */

36
arch/mips/mm/fault.c
View File

@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
const int field = sizeof(unsigned long) * 2;
siginfo_t info;
int fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
(write ? FAULT_FLAG_WRITE : 0);
#if 0
printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
@ -144,7 +147,11 @@ good_area:
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
fault = handle_mm_fault(mm, vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
@ -153,12 +160,27 @@ good_area:
goto do_sigbus;
BUG();
}
if (fault & VM_FAULT_MAJOR) {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
tsk->maj_flt++;
} else {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
tsk->min_flt++;
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
tsk->maj_flt++;
} else {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
tsk->min_flt++;
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);

5
arch/mips/pci/pci.c
View File

@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
/* Propagate hose info into the subordinate devices. */
struct list_head *ln;
struct pci_dev *dev = bus->self;
if (pci_probe_only && dev &&
@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
pcibios_fixup_device_resources(dev, bus);
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
dev = pci_dev_b(ln);
list_for_each_entry(dev, &bus->devices, bus_list) {
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
pcibios_fixup_device_resources(dev, bus);
}

10
arch/mips/pmc-sierra/yosemite/ht-irq.c
View File

@ -35,16 +35,6 @@
*/
void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_bus *current_bus = bus;
struct pci_dev *devices;
struct list_head *devices_link;
list_for_each(devices_link, &(current_bus->devices)) {
devices = pci_dev_b(devices_link);
if (devices == NULL)
continue;
}
/*
* PLX and SPKT related changes go here
*/

2
arch/mips/txx9/generic/7segled.c
View File

@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
break;
}
dev->id = i;
dev->dev = &tx_7segled_subsys;
dev->bus = &tx_7segled_subsys;
error = device_register(dev);
if (!error) {
device_create_file(dev, &dev_attr_ascii);

1
arch/sh/kernel/cpu/sh2a/ex.S
View File

@ -66,6 +66,7 @@ vector = 0
.long exception_entry0 + vector * 6
vector = vector + 1
.endr
vector = 0
.rept 256
.long exception_entry1 + vector * 6
vector = vector + 1

4
arch/sh/kernel/cpu/sh4a/clock-sh7757.c
View File

@ -79,7 +79,7 @@ struct clk div4_clks[DIV4_NR] = {
#define MSTPCR1 0xffc80034
#define MSTPCR2 0xffc10028
enum { MSTP004, MSTP000, MSTP114, MSTP113, MSTP112,
enum { MSTP004, MSTP000, MSTP127, MSTP114, MSTP113, MSTP112,
MSTP111, MSTP110, MSTP103, MSTP102, MSTP220,
MSTP_NR };
@ -89,6 +89,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
/* MSTPCR1 */
[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 27, 0),
[MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
[MSTP113] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 13, 0),
[MSTP112] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 12, 0),
@ -131,6 +132,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP102]),
CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
CLKDEV_CON_ID("rspi2", &mstp_clks[MSTP127]),
};
int __init arch_clk_init(void)

2
arch/sh/kernel/cpu/sh4a/clock-sh7785.c
View File

@ -156,7 +156,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]),
CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
CLKDEV_CON_ID("ubc_fck", &mstp_clks[MSTP117]),
CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP117]),
CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
CLKDEV_CON_ID("gdta_fck", &mstp_clks[MSTP100]),

2
arch/sparc/Makefile
View File

@ -31,7 +31,7 @@ UTS_MACHINE := sparc
#KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
KBUILD_AFLAGS += -m32
KBUILD_AFLAGS += -m32 -Wa,-Av8
#LDFLAGS_vmlinux = -N -Ttext 0xf0004000
# Since 2.5.40, the first stage is left not btfix-ed.

1412
arch/tile/configs/tilegx_defconfig
View File

File diff suppressed because it is too large Load Diff

1629
arch/tile/configs/tilepro_defconfig
View File

File diff suppressed because it is too large Load Diff

5
arch/tile/kernel/compat_signal.c
View File

@ -303,10 +303,7 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs)
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;

13
arch/tile/kernel/signal.c
View File

@ -97,10 +97,7 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
@ -286,13 +283,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
* the work_pending path in the return-to-user code, and
* either way we can re-enable interrupts unconditionally.
*/
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked,
&current->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
block_sigmask(ka, sig);
}
return ret;

2
arch/tile/kernel/sysfs.c
View File

@ -163,7 +163,7 @@ static int __init create_sysfs_entries(void)
#define create_hv_attr(name) \
if (!err) \
err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name);
err = sysfs_create_file(hypervisor_kobj, &dev_attr_##name.attr);
create_hv_attr(type);
create_hv_attr(version);
create_hv_attr(config_version);

2
arch/tile/lib/spinlock_32.c
View File

@ -144,7 +144,7 @@ void arch_read_unlock(arch_rwlock_t *rwlock)
for (;;) {
__insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1);
val = __insn_tns((int *)&rwlock->lock);
if (likely(val & 1) == 0) {
if (likely((val & 1) == 0)) {
rwlock->lock = val - (1 << _RD_COUNT_SHIFT);
__insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0);
break;

14
arch/x86/ia32/ia32_aout.c
View File

@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
current->mm->free_area_cache = TASK_UNMAPPED_BASE;
current->mm->cached_hole_size = 0;
retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
if (retval < 0) {
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
install_exec_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
@ -410,13 +417,6 @@ beyond_if:
set_brk(current->mm->start_brk, current->mm->brk);
retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
if (retval < 0) {
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
current->mm->start_stack =
(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
/* start thread */

17
arch/x86/kernel/cpu/perf_event_intel.c
View File

@ -385,14 +385,15 @@ static __initconst const u64 westmere_hw_cache_event_ids
#define NHM_LOCAL_DRAM (1 << 14)
#define NHM_NON_DRAM (1 << 15)
#define NHM_ALL_DRAM (NHM_REMOTE_DRAM|NHM_LOCAL_DRAM)
#define NHM_LOCAL (NHM_LOCAL_DRAM|NHM_REMOTE_CACHE_FWD)
#define NHM_REMOTE (NHM_REMOTE_DRAM)
#define NHM_DMND_READ (NHM_DMND_DATA_RD)
#define NHM_DMND_WRITE (NHM_DMND_RFO|NHM_DMND_WB)
#define NHM_DMND_PREFETCH (NHM_PF_DATA_RD|NHM_PF_DATA_RFO)
#define NHM_L3_HIT (NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM)
#define NHM_L3_MISS (NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD)
#define NHM_L3_MISS (NHM_NON_DRAM|NHM_LOCAL_DRAM|NHM_REMOTE_DRAM|NHM_REMOTE_CACHE_FWD)
#define NHM_L3_ACCESS (NHM_L3_HIT|NHM_L3_MISS)
static __initconst const u64 nehalem_hw_cache_extra_regs
@ -416,16 +417,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs
},
[ C(NODE) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_ALL_DRAM,
[ C(RESULT_MISS) ] = NHM_DMND_READ|NHM_REMOTE_DRAM,
[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_LOCAL|NHM_REMOTE,
[ C(RESULT_MISS) ] = NHM_DMND_READ|NHM_REMOTE,
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_ALL_DRAM,
[ C(RESULT_MISS) ] = NHM_DMND_WRITE|NHM_REMOTE_DRAM,
[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_LOCAL|NHM_REMOTE,
[ C(RESULT_MISS) ] = NHM_DMND_WRITE|NHM_REMOTE,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_ALL_DRAM,
[ C(RESULT_MISS) ] = NHM_DMND_PREFETCH|NHM_REMOTE_DRAM,
[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_LOCAL|NHM_REMOTE,
[ C(RESULT_MISS) ] = NHM_DMND_PREFETCH|NHM_REMOTE,
},
},
};

4
arch/x86/lib/delay.c
View File

@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops)
}
/* TSC based delay: */
static void delay_tsc(unsigned long loops)
static void delay_tsc(unsigned long __loops)
{
unsigned long bclock, now;
u32 bclock, now, loops = __loops;
int cpu;
preempt_disable();

4
arch/x86/mm/hugetlbpage.c
View File

@ -333,13 +333,15 @@ try_again:
* Lookup failure means no vma is above this address,
* i.e. return with success:
*/
if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
vma = find_vma(mm, addr);
if (!vma)
return addr;
/*
* new region fits between prev_vma->vm_end and
* vma->vm_start, use it:
*/
prev_vma = vma->vm_prev;
if (addr + len <= vma->vm_start &&
(!prev_vma || (addr >= prev_vma->vm_end))) {
/* remember the address as a hint for next time */

22
arch/x86/pci/acpi.c
View File

@ -60,6 +60,16 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
{
.callback = set_use_crs,
.ident = "MSI MS-7253",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
},
},
/* Now for the blacklist.. */
@ -282,9 +292,6 @@ static void add_resources(struct pci_root_info *info)
int i;
struct resource *res, *root, *conflict;
if (!pci_use_crs)
return;
coalesce_windows(info, IORESOURCE_MEM);
coalesce_windows(info, IORESOURCE_IO);
@ -336,8 +343,13 @@ get_current_resources(struct acpi_device *device, int busnum,
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
add_resources(&info);
return;
if (pci_use_crs) {
add_resources(&info);
return;
}
kfree(info.name);
name_alloc_fail:
kfree(info.res);

133
block/blk-ioc.c
View File

@ -36,10 +36,22 @@ static void icq_free_icq_rcu(struct rcu_head *head)
kmem_cache_free(icq->__rcu_icq_cache, icq);
}
/*
* Exit and free an icq. Called with both ioc and q locked.
*/
/* Exit an icq. Called with both ioc and q locked. */
static void ioc_exit_icq(struct io_cq *icq)
{
struct elevator_type *et = icq->q->elevator->type;
if (icq->flags & ICQ_EXITED)
return;
if (et->ops.elevator_exit_icq_fn)
et->ops.elevator_exit_icq_fn(icq);
icq->flags |= ICQ_EXITED;
}
/* Release an icq. Called with both ioc and q locked. */
static void ioc_destroy_icq(struct io_cq *icq)
{
struct io_context *ioc = icq->ioc;
struct request_queue *q = icq->q;
@ -60,8 +72,7 @@ static void ioc_exit_icq(struct io_cq *icq)
if (rcu_dereference_raw(ioc->icq_hint) == icq)
rcu_assign_pointer(ioc->icq_hint, NULL);
if (et->ops.elevator_exit_icq_fn)
et->ops.elevator_exit_icq_fn(icq);
ioc_exit_icq(icq);
/*
* @icq->q might have gone away by the time RCU callback runs
@ -79,7 +90,6 @@ static void ioc_release_fn(struct work_struct *work)
{
struct io_context *ioc = container_of(work, struct io_context,
release_work);
struct request_queue *last_q = NULL;
unsigned long flags;
/*
@ -93,44 +103,19 @@ static void ioc_release_fn(struct work_struct *work)
while (!hlist_empty(&ioc->icq_list)) {
struct io_cq *icq = hlist_entry(ioc->icq_list.first,
struct io_cq, ioc_node);
struct request_queue *this_q = icq->q;
struct request_queue *q = icq->q;
if (this_q != last_q) {
/*
* Need to switch to @this_q. Once we release
* @ioc->lock, it can go away along with @cic.
* Hold on to it.
*/
__blk_get_queue(this_q);
/*
* blk_put_queue() might sleep thanks to kobject
* idiocy. Always release both locks, put and
* restart.
*/
if (last_q) {
spin_unlock(last_q->queue_lock);
spin_unlock_irqrestore(&ioc->lock, flags);
blk_put_queue(last_q);
} else {
spin_unlock_irqrestore(&ioc->lock, flags);
}
last_q = this_q;
spin_lock_irqsave(this_q->queue_lock, flags);
spin_lock_nested(&ioc->lock, 1);
continue;
if (spin_trylock(q->queue_lock)) {
ioc_destroy_icq(icq);
spin_unlock(q->queue_lock);
} else {
spin_unlock_irqrestore(&ioc->lock, flags);
cpu_relax();
spin_lock_irqsave_nested(&ioc->lock, flags, 1);
}
ioc_exit_icq(icq);
}
if (last_q) {
spin_unlock(last_q->queue_lock);
spin_unlock_irqrestore(&ioc->lock, flags);
blk_put_queue(last_q);
} else {
spin_unlock_irqrestore(&ioc->lock, flags);
}
spin_unlock_irqrestore(&ioc->lock, flags);
kmem_cache_free(iocontext_cachep, ioc);
}
@ -145,6 +130,7 @@ static void ioc_release_fn(struct work_struct *work)
void put_io_context(struct io_context *ioc)
{
unsigned long flags;
bool free_ioc = false;
if (ioc == NULL)
return;
@ -159,8 +145,13 @@ void put_io_context(struct io_context *ioc)
spin_lock_irqsave(&ioc->lock, flags);
if (!hlist_empty(&ioc->icq_list))
schedule_work(&ioc->release_work);
else
free_ioc = true;
spin_unlock_irqrestore(&ioc->lock, flags);
}
if (free_ioc)
kmem_cache_free(iocontext_cachep, ioc);
}
EXPORT_SYMBOL(put_io_context);
@ -168,13 +159,41 @@ EXPORT_SYMBOL(put_io_context);
void exit_io_context(struct task_struct *task)
{
struct io_context *ioc;
struct io_cq *icq;
struct hlist_node *n;
unsigned long flags;
task_lock(task);
ioc = task->io_context;
task->io_context = NULL;
task_unlock(task);
atomic_dec(&ioc->nr_tasks);
if (!atomic_dec_and_test(&ioc->nr_tasks)) {
put_io_context(ioc);
return;
}
/*
* Need ioc lock to walk icq_list and q lock to exit icq. Perform
* reverse double locking. Read comment in ioc_release_fn() for
* explanation on the nested locking annotation.
*/
retry:
spin_lock_irqsave_nested(&ioc->lock, flags, 1);
hlist_for_each_entry(icq, n, &ioc->icq_list, ioc_node) {
if (icq->flags & ICQ_EXITED)
continue;
if (spin_trylock(icq->q->queue_lock)) {
ioc_exit_icq(icq);
spin_unlock(icq->q->queue_lock);
} else {
spin_unlock_irqrestore(&ioc->lock, flags);
cpu_relax();
goto retry;
}
}
spin_unlock_irqrestore(&ioc->lock, flags);
put_io_context(ioc);
}
@ -194,7 +213,7 @@ void ioc_clear_queue(struct request_queue *q)
struct io_context *ioc = icq->ioc;
spin_lock(&ioc->lock);
ioc_exit_icq(icq);
ioc_destroy_icq(icq);
spin_unlock(&ioc->lock);
}
}
@ -363,13 +382,13 @@ struct io_cq *ioc_create_icq(struct request_queue *q, gfp_t gfp_mask)
return icq;
}
void ioc_set_changed(struct io_context *ioc, int which)
void ioc_set_icq_flags(struct io_context *ioc, unsigned int flags)
{
struct io_cq *icq;
struct hlist_node *n;
hlist_for_each_entry(icq, n, &ioc->icq_list, ioc_node)
set_bit(which, &icq->changed);
icq->flags |= flags;
}
/**
@ -387,7 +406,7 @@ void ioc_ioprio_changed(struct io_context *ioc, int ioprio)
spin_lock_irqsave(&ioc->lock, flags);
ioc->ioprio = ioprio;
ioc_set_changed(ioc, ICQ_IOPRIO_CHANGED);
ioc_set_icq_flags(ioc, ICQ_IOPRIO_CHANGED);
spin_unlock_irqrestore(&ioc->lock, flags);
}
@ -404,11 +423,33 @@ void ioc_cgroup_changed(struct io_context *ioc)
unsigned long flags;
spin_lock_irqsave(&ioc->lock, flags);
ioc_set_changed(ioc, ICQ_CGROUP_CHANGED);
ioc_set_icq_flags(ioc, ICQ_CGROUP_CHANGED);
spin_unlock_irqrestore(&ioc->lock, flags);
}
EXPORT_SYMBOL(ioc_cgroup_changed);
/**
* icq_get_changed - fetch and clear icq changed mask
* @icq: icq of interest
*
* Fetch and clear ICQ_*_CHANGED bits from @icq. Grabs and releases
* @icq->ioc->lock.
*/
unsigned icq_get_changed(struct io_cq *icq)
{
unsigned int changed = 0;
unsigned long flags;
if (unlikely(icq->flags & ICQ_CHANGED_MASK)) {
spin_lock_irqsave(&icq->ioc->lock, flags);
changed = icq->flags & ICQ_CHANGED_MASK;
icq->flags &= ~ICQ_CHANGED_MASK;
spin_unlock_irqrestore(&icq->ioc->lock, flags);
}
return changed;
}
EXPORT_SYMBOL(icq_get_changed);
static int __init blk_ioc_init(void)
{
iocontext_cachep = kmem_cache_create("blkdev_ioc",

12
block/cfq-iosched.c
View File

@ -3470,20 +3470,20 @@ cfq_set_request(struct request_queue *q, struct request *rq, gfp_t gfp_mask)
const int rw = rq_data_dir(rq);
const bool is_sync = rq_is_sync(rq);
struct cfq_queue *cfqq;
unsigned int changed;
might_sleep_if(gfp_mask & __GFP_WAIT);
spin_lock_irq(q->queue_lock);
/* handle changed notifications */
if (unlikely(cic->icq.changed)) {
if (test_and_clear_bit(ICQ_IOPRIO_CHANGED, &cic->icq.changed))
changed_ioprio(cic);
changed = icq_get_changed(&cic->icq);
if (unlikely(changed & ICQ_IOPRIO_CHANGED))
changed_ioprio(cic);
#ifdef CONFIG_CFQ_GROUP_IOSCHED
if (test_and_clear_bit(ICQ_CGROUP_CHANGED, &cic->icq.changed))
changed_cgroup(cic);
if (unlikely(changed & ICQ_CGROUP_CHANGED))
changed_cgroup(cic);
#endif
}
new_queue:
cfqq = cic_to_cfqq(cic, is_sync);

42
block/genhd.c
View File

@ -35,6 +35,7 @@ static DEFINE_IDR(ext_devt_idr);
static struct device_type disk_type;
static void disk_alloc_events(struct gendisk *disk);
static void disk_add_events(struct gendisk *disk);
static void disk_del_events(struct gendisk *disk);
static void disk_release_events(struct gendisk *disk);
@ -601,6 +602,8 @@ void add_disk(struct gendisk *disk)
disk->major = MAJOR(devt);
disk->first_minor = MINOR(devt);
disk_alloc_events(disk);
/* Register BDI before referencing it from bdev */
bdi = &disk->queue->backing_dev_info;
bdi_register_dev(bdi, disk_devt(disk));
@ -1475,9 +1478,9 @@ static void __disk_unblock_events(struct gendisk *disk, bool check_now)
intv = disk_events_poll_jiffies(disk);
set_timer_slack(&ev->dwork.timer, intv / 4);
if (check_now)
queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, 0);
else if (intv)
queue_delayed_work(system_nrt_wq, &ev->dwork, intv);
queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, intv);
out_unlock:
spin_unlock_irqrestore(&ev->lock, flags);
}
@ -1521,7 +1524,7 @@ void disk_flush_events(struct gendisk *disk, unsigned int mask)
ev->clearing |= mask;
if (!ev->block) {
cancel_delayed_work(&ev->dwork);
queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, 0);
}
spin_unlock_irq(&ev->lock);
}
@ -1558,7 +1561,7 @@ unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask)
/* uncondtionally schedule event check and wait for it to finish */
disk_block_events(disk);
queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, 0);
flush_delayed_work(&ev->dwork);
__disk_unblock_events(disk, false);
@ -1595,7 +1598,7 @@ static void disk_events_workfn(struct work_struct *work)
intv = disk_events_poll_jiffies(disk);
if (!ev->block && intv)
queue_delayed_work(system_nrt_wq, &ev->dwork, intv);
queue_delayed_work(system_nrt_freezable_wq, &ev->dwork, intv);
spin_unlock_irq(&ev->lock);
@ -1733,9 +1736,9 @@ module_param_cb(events_dfl_poll_msecs, &disk_events_dfl_poll_msecs_param_ops,
&disk_events_dfl_poll_msecs, 0644);
/*
* disk_{add|del|release}_events - initialize and destroy disk_events.
* disk_{alloc|add|del|release}_events - initialize and destroy disk_events.
*/
static void disk_add_events(struct gendisk *disk)
static void disk_alloc_events(struct gendisk *disk)
{
struct disk_events *ev;
@ -1748,16 +1751,6 @@ static void disk_add_events(struct gendisk *disk)
return;
}
if (sysfs_create_files(&disk_to_dev(disk)->kobj,
disk_events_attrs) < 0) {
pr_warn("%s: failed to create sysfs files for events\n",
disk->disk_name);
kfree(ev);
return;
}
disk->ev = ev;
INIT_LIST_HEAD(&ev->node);
ev->disk = disk;
spin_lock_init(&ev->lock);
@ -1766,8 +1759,21 @@ static void disk_add_events(struct gendisk *disk)
ev->poll_msecs = -1;
INIT_DELAYED_WORK(&ev->dwork, disk_events_workfn);
disk->ev = ev;
}
static void disk_add_events(struct gendisk *disk)
{
if (!disk->ev)
return;
/* FIXME: error handling */
if (sysfs_create_files(&disk_to_dev(disk)->kobj, disk_events_attrs) < 0)
pr_warn("%s: failed to create sysfs files for events\n",
disk->disk_name);
mutex_lock(&disk_events_mutex);
list_add_tail(&ev->node, &disk_events);
list_add_tail(&disk->ev->node, &disk_events);
mutex_unlock(&disk_events_mutex);
/*

48
block/partition-generic.c
View File

@ -389,17 +389,11 @@ static bool disk_unlock_native_capacity(struct gendisk *disk)
}
}
int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
static int drop_partitions(struct gendisk *disk, struct block_device *bdev)
{
struct parsed_partitions *state = NULL;
struct disk_part_iter piter;
struct hd_struct *part;
int p, highest, res;
rescan:
if (state && !IS_ERR(state)) {
kfree(state);
state = NULL;
}
int res;
if (bdev->bd_part_count)
return -EBUSY;
@ -412,6 +406,24 @@ rescan:
delete_partition(disk, part->partno);
disk_part_iter_exit(&piter);
return 0;
}
int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
{
struct parsed_partitions *state = NULL;
struct hd_struct *part;
int p, highest, res;
rescan:
if (state && !IS_ERR(state)) {
kfree(state);
state = NULL;
}
res = drop_partitions(disk, bdev);
if (res)
return res;
if (disk->fops->revalidate_disk)
disk->fops->revalidate_disk(disk);
check_disk_size_change(disk, bdev);
@ -515,6 +527,26 @@ rescan:
return 0;
}
int invalidate_partitions(struct gendisk *disk, struct block_device *bdev)
{
int res;
if (!bdev->bd_invalidated)
return 0;
res = drop_partitions(disk, bdev);
if (res)
return res;
set_capacity(disk, 0);
check_disk_size_change(disk, bdev);
bdev->bd_invalidated = 0;
/* tell userspace that the media / partition table may have changed */
kobject_uevent(&disk_to_dev(disk)->kobj, KOBJ_CHANGE);
return 0;
}
unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
{
struct address_space *mapping = bdev->bd_inode->i_mapping;

18
drivers/block/DAC960.c
View File

@ -1177,7 +1177,8 @@ static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
int TimeoutCounter;
int i;
memset(&CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
return DAC960_Failure(Controller, "DMA mask out of range");
Controller->BounceBufferLimit = DMA_BIT_MASK(32);
@ -4627,7 +4628,8 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
DAC960_Controller_T *Controller = Command->Controller;
DAC960_CommandType_T CommandType = Command->CommandType;
DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
DAC960_V2_IOCTL_Opcode_T CommandOpcode = CommandMailbox->Common.IOCTL_Opcode;
DAC960_V2_IOCTL_Opcode_T IOCTLOpcode = CommandMailbox->Common.IOCTL_Opcode;
DAC960_V2_CommandOpcode_T CommandOpcode = CommandMailbox->SCSI_10.CommandOpcode;
DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
if (CommandType == DAC960_ReadCommand ||
@ -4699,7 +4701,7 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
{
if (Controller->ShutdownMonitoringTimer)
return;
if (CommandOpcode == DAC960_V2_GetControllerInfo)
if (IOCTLOpcode == DAC960_V2_GetControllerInfo)
{
DAC960_V2_ControllerInfo_T *NewControllerInfo =
Controller->V2.NewControllerInformation;
@ -4719,14 +4721,14 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
memcpy(ControllerInfo, NewControllerInfo,
sizeof(DAC960_V2_ControllerInfo_T));
}
else if (CommandOpcode == DAC960_V2_GetEvent)
else if (IOCTLOpcode == DAC960_V2_GetEvent)
{
if (CommandStatus == DAC960_V2_NormalCompletion) {
DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
}
Controller->V2.NextEventSequenceNumber++;
}
else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
CommandStatus == DAC960_V2_NormalCompletion)
{
DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
@ -4915,7 +4917,7 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
NewPhysicalDeviceInfo->LogicalUnit++;
Controller->V2.PhysicalDeviceIndex++;
}
else if (CommandOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
{
unsigned int DeviceIndex;
for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
@ -4938,7 +4940,7 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
}
Controller->V2.NeedPhysicalDeviceInformation = false;
}
else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
CommandStatus == DAC960_V2_NormalCompletion)
{
DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
@ -5065,7 +5067,7 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
[LogicalDeviceNumber] = true;
NewLogicalDeviceInfo->LogicalDeviceNumber++;
}
else if (CommandOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
{
int LogicalDriveNumber;
for (LogicalDriveNumber = 0;

2
drivers/block/floppy.c
View File

@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev)
bio.bi_size = size;
bio.bi_bdev = bdev;
bio.bi_sector = 0;
bio.bi_flags = BIO_QUIET;
bio.bi_flags = (1 << BIO_QUIET);
init_completion(&complete);
bio.bi_private = &complete;
bio.bi_end_io = floppy_rb0_complete;

2
drivers/block/sx8.c
View File

@ -1120,7 +1120,7 @@ static inline void carm_handle_resp(struct carm_host *host,
break;
case MISC_GET_FW_VER: {
struct carm_fw_ver *ver = (struct carm_fw_ver *)
mem + sizeof(struct carm_msg_get_fw_ver);
(mem + sizeof(struct carm_msg_get_fw_ver));
if (!error) {
host->fw_ver = le32_to_cpu(ver->version);
host->flags |= (ver->features & FL_FW_VER_MASK);

16
drivers/gpu/drm/exynos/exynos_drm_connector.c
View File

@ -54,14 +54,14 @@ convert_to_display_mode(struct drm_display_mode *mode,
mode->vrefresh = timing->refresh;
mode->hdisplay = timing->xres;
mode->hsync_start = mode->hdisplay + timing->left_margin;
mode->hsync_start = mode->hdisplay + timing->right_margin;
mode->hsync_end = mode->hsync_start + timing->hsync_len;
mode->htotal = mode->hsync_end + timing->right_margin;
mode->htotal = mode->hsync_end + timing->left_margin;
mode->vdisplay = timing->yres;
mode->vsync_start = mode->vdisplay + timing->upper_margin;
mode->vsync_start = mode->vdisplay + timing->lower_margin;
mode->vsync_end = mode->vsync_start + timing->vsync_len;
mode->vtotal = mode->vsync_end + timing->lower_margin;
mode->vtotal = mode->vsync_end + timing->upper_margin;
mode->width_mm = panel->width_mm;
mode->height_mm = panel->height_mm;
@ -85,14 +85,14 @@ convert_to_video_timing(struct fb_videomode *timing,
timing->refresh = drm_mode_vrefresh(mode);
timing->xres = mode->hdisplay;
timing->left_margin = mode->hsync_start - mode->hdisplay;
timing->right_margin = mode->hsync_start - mode->hdisplay;
timing->hsync_len = mode->hsync_end - mode->hsync_start;
timing->right_margin = mode->htotal - mode->hsync_end;
timing->left_margin = mode->htotal - mode->hsync_end;
timing->yres = mode->vdisplay;
timing->upper_margin = mode->vsync_start - mode->vdisplay;
timing->lower_margin = mode->vsync_start - mode->vdisplay;
timing->vsync_len = mode->vsync_end - mode->vsync_start;
timing->lower_margin = mode->vtotal - mode->vsync_end;
timing->upper_margin = mode->vtotal - mode->vsync_end;
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
timing->vmode = FB_VMODE_INTERLACED;

2
drivers/gpu/drm/exynos/exynos_drm_drv.c
View File

@ -246,7 +246,7 @@ static struct platform_driver exynos_drm_platform_driver = {
.remove = __devexit_p(exynos_drm_platform_remove),
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.name = "exynos-drm",
},
};

28
drivers/gpu/drm/exynos/exynos_drm_fbdev.c
View File

@ -46,39 +46,13 @@ struct exynos_drm_fbdev {
struct exynos_drm_gem_obj *exynos_gem_obj;
};
static int exynos_drm_fbdev_set_par(struct fb_info *info)
{
struct fb_var_screeninfo *var = &info->var;
switch (var->bits_per_pixel) {
case 32:
case 24:
case 18:
case 16:
case 12:
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 1:
info->fix.visual = FB_VISUAL_MONO01;
break;
default:
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
}
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
return drm_fb_helper_set_par(info);
}
static struct fb_ops exynos_drm_fb_ops = {
.owner = THIS_MODULE,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_check_var = drm_fb_helper_check_var,
.fb_set_par = exynos_drm_fbdev_set_par,
.fb_set_par = drm_fb_helper_set_par,
.fb_blank = drm_fb_helper_blank,
.fb_pan_display = drm_fb_helper_pan_display,
.fb_setcmap = drm_fb_helper_setcmap,

17
drivers/gpu/drm/exynos/exynos_drm_fimd.c
View File

@ -817,8 +817,6 @@ static int __devinit fimd_probe(struct platform_device *pdev)
goto err_clk_get;
}
clk_enable(ctx->bus_clk);
ctx->lcd_clk = clk_get(dev, "sclk_fimd");
if (IS_ERR(ctx->lcd_clk)) {
dev_err(dev, "failed to get lcd clock\n");
@ -826,8 +824,6 @@ static int __devinit fimd_probe(struct platform_device *pdev)
goto err_bus_clk;
}
clk_enable(ctx->lcd_clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "failed to find registers\n");
@ -864,17 +860,11 @@ static int __devinit fimd_probe(struct platform_device *pdev)
goto err_req_irq;
}
ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
ctx->vidcon0 = pdata->vidcon0;
ctx->vidcon1 = pdata->vidcon1;
ctx->default_win = pdata->default_win;
ctx->panel = panel;
panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
panel->timing.pixclock, ctx->clkdiv);
subdrv = &ctx->subdrv;
subdrv->probe = fimd_subdrv_probe;
@ -889,10 +879,15 @@ static int __devinit fimd_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ctx);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
panel->timing.pixclock, ctx->clkdiv);
for (win = 0; win < WINDOWS_NR; win++)
fimd_clear_win(ctx, win);

2
drivers/gpu/drm/gma500/cdv_device.c
View File

@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev)
cdv_get_core_freq(dev);
gma_intel_opregion_init(dev);
psb_intel_init_bios(dev);
REG_WRITE(PORT_HOTPLUG_EN, 0);
REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
return 0;
}

1
drivers/gpu/drm/gma500/framebuffer.c
View File

@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = {
.fb_imageblit = cfb_imageblit,
.fb_pan_display = psbfb_pan,
.fb_mmap = psbfb_mmap,
.fb_sync = psbfb_sync,
.fb_ioctl = psbfb_ioctl,
};

Some files were not shown because too many files have changed in this diff Show More