libata: improve ata_down_xfermask_limit()
Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
parent
a619f981b4
commit
458337dbb1
|
@ -1780,6 +1780,7 @@ int ata_bus_probe(struct ata_port *ap)
|
|||
int tries[ATA_MAX_DEVICES];
|
||||
int i, rc, down_xfermask;
|
||||
struct ata_device *dev;
|
||||
int dnxfer_sel;
|
||||
|
||||
ata_port_probe(ap);
|
||||
|
||||
|
@ -1861,13 +1862,15 @@ int ata_bus_probe(struct ata_port *ap)
|
|||
/* fall through */
|
||||
default:
|
||||
tries[dev->devno]--;
|
||||
if (down_xfermask &&
|
||||
ata_down_xfermask_limit(dev, tries[dev->devno] == 1))
|
||||
dnxfer_sel = ATA_DNXFER_ANY;
|
||||
if (tries[dev->devno] == 1)
|
||||
dnxfer_sel = ATA_DNXFER_FORCE_PIO0;
|
||||
if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel))
|
||||
tries[dev->devno] = 0;
|
||||
}
|
||||
|
||||
if (!tries[dev->devno]) {
|
||||
ata_down_xfermask_limit(dev, 1);
|
||||
ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0);
|
||||
ata_dev_disable(dev);
|
||||
}
|
||||
|
||||
|
@ -2300,7 +2303,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
|
|||
/**
|
||||
* ata_down_xfermask_limit - adjust dev xfer masks downward
|
||||
* @dev: Device to adjust xfer masks
|
||||
* @force_pio0: Force PIO0
|
||||
* @sel: ATA_DNXFER_* selector
|
||||
*
|
||||
* Adjust xfer masks of @dev downward. Note that this function
|
||||
* does not apply the change. Invoking ata_set_mode() afterwards
|
||||
|
@ -2312,37 +2315,87 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
|
|||
* RETURNS:
|
||||
* 0 on success, negative errno on failure
|
||||
*/
|
||||
int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
|
||||
int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
|
||||
{
|
||||
unsigned long xfer_mask;
|
||||
int highbit;
|
||||
char buf[32];
|
||||
unsigned int orig_mask, xfer_mask;
|
||||
unsigned int pio_mask, mwdma_mask, udma_mask;
|
||||
int quiet, highbit;
|
||||
|
||||
xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask,
|
||||
dev->udma_mask);
|
||||
quiet = !!(sel & ATA_DNXFER_QUIET);
|
||||
sel &= ~ATA_DNXFER_QUIET;
|
||||
|
||||
if (!xfer_mask)
|
||||
goto fail;
|
||||
/* don't gear down to MWDMA from UDMA, go directly to PIO */
|
||||
if (xfer_mask & ATA_MASK_UDMA)
|
||||
xfer_mask &= ~ATA_MASK_MWDMA;
|
||||
xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
|
||||
dev->mwdma_mask,
|
||||
dev->udma_mask);
|
||||
ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
|
||||
|
||||
highbit = fls(xfer_mask) - 1;
|
||||
xfer_mask &= ~(1 << highbit);
|
||||
if (force_pio0)
|
||||
xfer_mask &= 1 << ATA_SHIFT_PIO;
|
||||
if (!xfer_mask)
|
||||
goto fail;
|
||||
switch (sel) {
|
||||
case ATA_DNXFER_PIO:
|
||||
highbit = fls(pio_mask) - 1;
|
||||
pio_mask &= ~(1 << highbit);
|
||||
break;
|
||||
|
||||
case ATA_DNXFER_DMA:
|
||||
if (udma_mask) {
|
||||
highbit = fls(udma_mask) - 1;
|
||||
udma_mask &= ~(1 << highbit);
|
||||
if (!udma_mask)
|
||||
return -ENOENT;
|
||||
} else if (mwdma_mask) {
|
||||
highbit = fls(mwdma_mask) - 1;
|
||||
mwdma_mask &= ~(1 << highbit);
|
||||
if (!mwdma_mask)
|
||||
return -ENOENT;
|
||||
}
|
||||
break;
|
||||
|
||||
case ATA_DNXFER_40C:
|
||||
udma_mask &= ATA_UDMA_MASK_40C;
|
||||
break;
|
||||
|
||||
case ATA_DNXFER_FORCE_PIO0:
|
||||
pio_mask &= 1;
|
||||
case ATA_DNXFER_FORCE_PIO:
|
||||
mwdma_mask = 0;
|
||||
udma_mask = 0;
|
||||
break;
|
||||
|
||||
case ATA_DNXFER_ANY:
|
||||
/* don't gear down to MWDMA from UDMA, go directly to PIO */
|
||||
if (xfer_mask & ATA_MASK_UDMA)
|
||||
xfer_mask &= ~ATA_MASK_MWDMA;
|
||||
|
||||
highbit = fls(xfer_mask) - 1;
|
||||
xfer_mask &= ~(1 << highbit);
|
||||
break;
|
||||
|
||||
default:
|
||||
BUG();
|
||||
}
|
||||
|
||||
xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
|
||||
|
||||
if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
|
||||
return -ENOENT;
|
||||
|
||||
if (!quiet) {
|
||||
if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
|
||||
snprintf(buf, sizeof(buf), "%s:%s",
|
||||
ata_mode_string(xfer_mask),
|
||||
ata_mode_string(xfer_mask & ATA_MASK_PIO));
|
||||
else
|
||||
snprintf(buf, sizeof(buf), "%s",
|
||||
ata_mode_string(xfer_mask));
|
||||
|
||||
ata_dev_printk(dev, KERN_WARNING,
|
||||
"limiting speed to %s\n", buf);
|
||||
}
|
||||
|
||||
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
|
||||
&dev->udma_mask);
|
||||
|
||||
ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n",
|
||||
ata_mode_string(xfer_mask));
|
||||
|
||||
return 0;
|
||||
|
||||
fail:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int ata_dev_set_mode(struct ata_device *dev)
|
||||
|
|
|
@ -1276,7 +1276,7 @@ static int ata_eh_speed_down(struct ata_device *dev, int is_io,
|
|||
return ATA_EH_HARDRESET;
|
||||
|
||||
/* lower transfer mode */
|
||||
if (ata_down_xfermask_limit(dev, 0) == 0)
|
||||
if (ata_down_xfermask_limit(dev, ATA_DNXFER_ANY) == 0)
|
||||
return ATA_EH_SOFTRESET;
|
||||
|
||||
ata_dev_printk(dev, KERN_ERR,
|
||||
|
@ -1965,6 +1965,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
|
|||
struct ata_eh_context *ehc = &ap->eh_context;
|
||||
struct ata_device *dev;
|
||||
int down_xfermask, i, rc;
|
||||
int dnxfer_sel;
|
||||
|
||||
DPRINTK("ENTER\n");
|
||||
|
||||
|
@ -2064,8 +2065,10 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
|
|||
sata_down_spd_limit(ap);
|
||||
default:
|
||||
ehc->tries[dev->devno]--;
|
||||
if (down_xfermask &&
|
||||
ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1))
|
||||
dnxfer_sel = ATA_DNXFER_ANY;
|
||||
if (ehc->tries[dev->devno] == 1)
|
||||
dnxfer_sel = ATA_DNXFER_FORCE_PIO0;
|
||||
if (down_xfermask && ata_down_xfermask_limit(dev, dnxfer_sel))
|
||||
ehc->tries[dev->devno] = 0;
|
||||
}
|
||||
|
||||
|
|
|
@ -41,6 +41,16 @@ struct ata_scsi_args {
|
|||
enum {
|
||||
/* flags for ata_dev_read_id() */
|
||||
ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */
|
||||
|
||||
/* selector for ata_down_xfermask_limit() */
|
||||
ATA_DNXFER_PIO = 0, /* speed down PIO */
|
||||
ATA_DNXFER_DMA = 1, /* speed down DMA */
|
||||
ATA_DNXFER_40C = 2, /* apply 40c cable limit */
|
||||
ATA_DNXFER_FORCE_PIO = 3, /* force PIO */
|
||||
ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */
|
||||
ATA_DNXFER_ANY = 5, /* speed down any */
|
||||
|
||||
ATA_DNXFER_QUIET = (1 << 31),
|
||||
};
|
||||
|
||||
extern struct workqueue_struct *ata_aux_wq;
|
||||
|
@ -69,7 +79,7 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
|
|||
extern int ata_dev_configure(struct ata_device *dev);
|
||||
extern int sata_down_spd_limit(struct ata_port *ap);
|
||||
extern int sata_set_spd_needed(struct ata_port *ap);
|
||||
extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
|
||||
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
|
||||
extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
|
||||
extern void ata_sg_clean(struct ata_queued_cmd *qc);
|
||||
extern void ata_qc_free(struct ata_queued_cmd *qc);
|
||||
|
|
Loading…
Reference in a new issue