redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()

Browse source 
The following commits change gpio-omap to use dynamic
IRQ allocation:

25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ
384ebe1 gpio/omap: Add DT support to GPIO driver

With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ
is no longer valid. We must be using gpio_to_irq() instead.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tarun Kanti DebBarma 2012-03-29 08:41:01 -07:00 committed by Tony Lindgren
parent a26d3c4fcd
commit 46a0a5402f
21 changed files with 47 additions and 46 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
arch/arm/mach-omap1/board-h2.c
View file

@ -244,8 +244,6 @@ static struct resource h2_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@ -364,11 +362,9 @@ static struct tps65010_board tps_board = {
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.irq = OMAP_GPIO_IRQ(58),
.platform_data = &tps_board,
}, {
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(2),
},
};
@ -437,10 +433,14 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
h2_i2c_board_info[0].irq = gpio_to_irq(58);
h2_i2c_board_info[1].irq = gpio_to_irq(2);
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);

9
arch/arm/mach-omap1/board-h3.c
View file

@ -246,8 +246,6 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(40),
.end = OMAP_GPIO_IRQ(40),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@ -337,7 +335,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
.modalias = "tsc2101",
.bus_num = 2,
.chip_select = 0,
.irq = OMAP_GPIO_IRQ(H3_TS_GPIO),
.max_speed_hz = 16000000,
/* .platform_data = &tsc_platform_data, */
},
@ -377,11 +374,9 @@ static struct omap_board_config_kernel h3_config[] __initdata = {
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65013", 0x48),
/* .irq = OMAP_GPIO_IRQ(??), */
},
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(14),
},
};
@ -423,12 +418,16 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
omap_board_config = h3_config;
omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
h3_i2c_board_info[1].irq = gpio_to_irq(14);
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);

6
arch/arm/mach-omap1/board-htcherald.c
View file

@ -323,8 +323,6 @@ static struct platform_device gpio_leds_device = {
static struct resource htcpld_resources[] = {
[0] = {
.start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.flags = IORESOURCE_IRQ,
},
};
@ -453,7 +451,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = {
{
.modalias = "ads7846",
.platform_data = &htcherald_ts_platform_data,
.irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
.max_speed_hz = 2500000,
.bus_num = 2,
.chip_select = 1,
@ -581,6 +578,8 @@ static void __init htcherald_init(void)
/* Do board initialization before we register all the devices */
omap_board_config = htcherald_config;
omap_board_config_size = ARRAY_SIZE(htcherald_config);
htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
@ -588,6 +587,7 @@ static void __init htcherald_init(void)
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
spi_register_board_info(htcherald_spi_board_info,
ARRAY_SIZE(htcherald_spi_board_info));

4
arch/arm/mach-omap1/board-innovator.c
View file

@ -247,8 +247,6 @@ static struct resource innovator1610_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@ -412,6 +410,8 @@ static void __init innovator_init(void)
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (!cpu_is_omap1510()) {
innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
}
#endif

2
arch/arm/mach-omap1/board-nokia770.c
View file

@ -147,7 +147,6 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 2500000,
.irq = OMAP_GPIO_IRQ(15),
.platform_data = &nokia770_ads7846_platform_data,
},
};
@ -242,6 +241,7 @@ static void __init omap_nokia770_init(void)
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
nokia770_spi_board_info[1].irq = gpio_to_irq(15);
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
omap_serial_init();

12
arch/arm/mach-omap1/board-osk.c
View file

@ -128,8 +128,6 @@ static struct resource osk5912_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@ -146,8 +144,6 @@ static struct platform_device osk5912_smc91x_device = {
static struct resource osk5912_cf_resources[] = {
[0] = {
.start = OMAP_GPIO_IRQ(62),
.end = OMAP_GPIO_IRQ(62),
.flags = IORESOURCE_IRQ,
},
};
@ -239,7 +235,6 @@ static struct tps65010_board tps_board = {
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
.platform_data = &tps_board,
},
@ -413,7 +408,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &mistral_ts_info,
.irq = OMAP_GPIO_IRQ(4),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
@ -476,6 +470,7 @@ static void __init osk_mistral_init(void)
gpio_direction_input(4);
irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
mistral_boardinfo[0].irq = gpio_to_irq(4);
spi_register_board_info(mistral_boardinfo,
ARRAY_SIZE(mistral_boardinfo));
@ -547,6 +542,10 @@ static void __init osk_init(void)
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
osk5912_smc91x_resources[1].start = gpio_to_irq(0);
osk5912_smc91x_resources[1].end = gpio_to_irq(0);
osk5912_cf_resources[0].start = gpio_to_irq(62);
osk5912_cf_resources[0].end = gpio_to_irq(62);
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
omap_board_config = osk_config;
omap_board_config_size = ARRAY_SIZE(osk_config);
@ -563,6 +562,7 @@ static void __init osk_init(void)
gpio_direction_input(OMAP_MPUIO(1));
omap_serial_init();
osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
omap_register_i2c_bus(1, 400, osk_i2c_board_info,
ARRAY_SIZE(osk_i2c_board_info));
osk_mistral_init();

2
arch/arm/mach-omap1/board-palmte.c
View file

@ -220,7 +220,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
.modalias = "tsc2102",
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
.max_speed_hz = 8000000,
},
};
@ -257,6 +256,7 @@ static void __init omap_palmte_init(void)
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
palmte_misc_gpio_setup();
omap_serial_init();

2
arch/arm/mach-omap1/board-palmtt.c
View file

@ -256,7 +256,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmtt_ts_info,
.irq = OMAP_GPIO_IRQ(6),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
@ -304,6 +303,7 @@ static void __init omap_palmtt_init(void)
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
palmtt_boardinfo[0].irq = gpio_to_irq(6);
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);

2
arch/arm/mach-omap1/board-palmz71.c
View file

@ -223,7 +223,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmz71_ts_info,
.irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
@ -319,6 +318,7 @@ omap_palmz71_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
spi_register_board_info(palmz71_boardinfo,
ARRAY_SIZE(palmz71_boardinfo));
omap1_usb_init(&palmz71_usb_config);

16
arch/arm/mach-omap1/board-voiceblue.c
View file

@ -44,7 +44,6 @@
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
.irq = OMAP_GPIO_IRQ(12),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@ -52,7 +51,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
.irq = OMAP_GPIO_IRQ(13),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@ -60,7 +58,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
.irq = OMAP_GPIO_IRQ(14),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@ -68,7 +65,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
.irq = OMAP_GPIO_IRQ(15),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@ -80,9 +76,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = voiceblue_ports,
},
};
static int __init ext_uart_init(void)
@ -90,6 +83,11 @@ static int __init ext_uart_init(void)
if (!machine_is_voiceblue())
return -ENODEV;
voiceblue_ports[0].irq = gpio_to_irq(12);
voiceblue_ports[1].irq = gpio_to_irq(13);
voiceblue_ports[2].irq = gpio_to_irq(14);
voiceblue_ports[3].irq = gpio_to_irq(15);
serial_device.dev.platform_data = voiceblue_ports;
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
@ -128,8 +126,6 @@ static struct resource voiceblue_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@ -275,6 +271,8 @@ static void __init voiceblue_init(void)
irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);

2
arch/arm/mach-omap2/board-2430sdp.c
View file

@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2D),
.flags = I2C_CLIENT_WAKE,
.irq = OMAP_GPIO_IRQ(78),
},
};
static int __init omap2430_i2c_init(void)
{
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,

2
arch/arm/mach-omap2/board-4430sdp.c
View file

@ -873,7 +873,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
@ -883,6 +882,7 @@ static void __init omap4_sdp4430_wifi_init(void)
int ret;
omap4_sdp4430_wifi_mux_init();
omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
if (ret)
pr_err("Error setting wl12xx data: %d\n", ret);

4
arch/arm/mach-omap2/board-apollon.c
View file

@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@ -341,6 +339,8 @@ static void __init omap_apollon_init(void)
* You have to mux them off in device drivers later on
* if not needed.
*/
apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);

2
arch/arm/mach-omap2/board-devkit8000.c
View file

@ -410,7 +410,6 @@ static struct resource omap_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
.start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
@ -637,6 +636,7 @@ static void __init devkit8000_init(void)
omap_dm9000_init();
devkit8000_i2c_init();
omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));

2
arch/arm/mach-omap2/board-h4.c
View file

@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = {
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.irq = OMAP_GPIO_IRQ(125),
},
{ /* EEPROM on mainboard */
I2C_BOARD_INFO("24c01", 0x52),
@ -377,6 +376,7 @@ static void __init omap_h4_init(void)
*/
board_mkp_init();
h4_i2c_board_info[0].irq = gpio_to_irq(125);
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));

2
arch/arm/mach-omap2/board-omap3evm.c
View file

@ -487,7 +487,6 @@ static struct platform_device omap3evm_wlan_regulator = {
};
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
#endif
@ -623,6 +622,7 @@ static void __init omap3_evm_wl12xx_init(void)
int ret;
/* WL12xx WLAN Init */
omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);

2
arch/arm/mach-omap2/board-omap4panda.c
View file

@ -199,7 +199,6 @@ static struct platform_device omap_vwlan_device = {
};
struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
@ -494,6 +493,7 @@ static void __init omap4_panda_init(void)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);

3
arch/arm/mach-omap2/board-rx51-peripherals.c
View file

@ -169,7 +169,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.modalias = "tsc2005",
.bus_num = 1,
.chip_select = 0,
.irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
.max_speed_hz = 6000000,
.controller_data = &tsc2005_mcspi_config,
.platform_data = &tsc2005_pdata,
@ -1121,6 +1120,8 @@ static void __init rx51_init_tsc2005(void)
"tsc2005 reset");
if (r >= 0) {
tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
} else {
printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
tsc2005_pdata.esd_timeout_ms = 0;

3
arch/arm/mach-omap2/board-zoom-debugboard.c
View file

@ -43,7 +43,6 @@ static inline void __init zoom_init_smsc911x(void)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = ZOOM_UART_BASE,
.irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
@ -89,6 +88,8 @@ static inline void __init zoom_init_quaduart(void)
if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
quart_gpio);
serial_platform_data[0].irq = gpio_to_irq(102);
}
static inline int omap_zoom_debugboard_detect(void)

6
arch/arm/mach-omap2/board-zoom-peripherals.c
View file

@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
/* ZOOM ref clock is 26 MHz */
.board_ref_clock = 1,
};
@ -296,7 +295,10 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
int ret;
omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);

2
arch/arm/mach-omap2/common-board-devices.c
View file

@ -78,7 +78,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
ads7846_config.gpio_pendown = gpio_pendown;
spi_bi->bus_num = bus_num;
spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
spi_bi->irq = gpio_to_irq(gpio_pendown);
if (board_pdata)
spi_bi->platform_data = board_pdata;