iio: humidity: add HDC100x support
Add support for the HDC100x temperature and humidity sensors including the resistive heater element. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
7db75fd615
commit
4839367d99
9
Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
Normal file
9
Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x
Normal file
|
@ -0,0 +1,9 @@
|
|||
What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
|
||||
What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
|
||||
KernelVersion: 4.3
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
Controls the heater device within the humidity sensor to get
|
||||
rid of excess condensation.
|
||||
|
||||
Valid control values are 0 = OFF, and 1 = ON.
|
|
@ -12,6 +12,16 @@ config DHT11
|
|||
Other sensors should work as well as long as they speak the
|
||||
same protocol.
|
||||
|
||||
config HDC100X
|
||||
tristate "TI HDC100x relative humidity and temperature sensor"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to build support for the TI HDC100x series of
|
||||
relative humidity and temperature sensors.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called hdc100x.
|
||||
|
||||
config SI7005
|
||||
tristate "SI7005 relative humidity and temperature sensor"
|
||||
depends on I2C
|
||||
|
|
|
@ -3,5 +3,6 @@
|
|||
#
|
||||
|
||||
obj-$(CONFIG_DHT11) += dht11.o
|
||||
obj-$(CONFIG_HDC100X) += hdc100x.o
|
||||
obj-$(CONFIG_SI7005) += si7005.o
|
||||
obj-$(CONFIG_SI7020) += si7020.o
|
||||
|
|
319
drivers/iio/humidity/hdc100x.c
Normal file
319
drivers/iio/humidity/hdc100x.c
Normal file
|
@ -0,0 +1,319 @@
|
|||
/*
|
||||
* hdc100x.c - Support for the TI HDC100x temperature + humidity sensors
|
||||
*
|
||||
* Copyright (C) 2015 Matt Ranostay <mranostay@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
|
||||
#define HDC100X_REG_TEMP 0x00
|
||||
#define HDC100X_REG_HUMIDITY 0x01
|
||||
|
||||
#define HDC100X_REG_CONFIG 0x02
|
||||
#define HDC100X_REG_CONFIG_HEATER_EN BIT(13)
|
||||
|
||||
struct hdc100x_data {
|
||||
struct i2c_client *client;
|
||||
struct mutex lock;
|
||||
u16 config;
|
||||
|
||||
/* integration time of the sensor */
|
||||
int adc_int_us[2];
|
||||
};
|
||||
|
||||
/* integration time in us */
|
||||
static const int hdc100x_int_time[][3] = {
|
||||
{ 6350, 3650, 0 }, /* IIO_TEMP channel*/
|
||||
{ 6500, 3850, 2500 }, /* IIO_HUMIDITYRELATIVE channel */
|
||||
};
|
||||
|
||||
/* HDC100X_REG_CONFIG shift and mask values */
|
||||
static const struct {
|
||||
int shift;
|
||||
int mask;
|
||||
} hdc100x_resolution_shift[2] = {
|
||||
{ /* IIO_TEMP channel */
|
||||
.shift = 10,
|
||||
.mask = 1
|
||||
},
|
||||
{ /* IIO_HUMIDITYRELATIVE channel */
|
||||
.shift = 8,
|
||||
.mask = 2,
|
||||
},
|
||||
};
|
||||
|
||||
static IIO_CONST_ATTR(temp_integration_time_available,
|
||||
"0.00365 0.00635");
|
||||
|
||||
static IIO_CONST_ATTR(humidityrelative_integration_time_available,
|
||||
"0.0025 0.00385 0.0065");
|
||||
|
||||
static IIO_CONST_ATTR(out_current_heater_raw_available,
|
||||
"0 1");
|
||||
|
||||
static struct attribute *hdc100x_attributes[] = {
|
||||
&iio_const_attr_temp_integration_time_available.dev_attr.attr,
|
||||
&iio_const_attr_humidityrelative_integration_time_available.dev_attr.attr,
|
||||
&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static struct attribute_group hdc100x_attribute_group = {
|
||||
.attrs = hdc100x_attributes,
|
||||
};
|
||||
|
||||
static const struct iio_chan_spec hdc100x_channels[] = {
|
||||
{
|
||||
.type = IIO_TEMP,
|
||||
.address = HDC100X_REG_TEMP,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||||
BIT(IIO_CHAN_INFO_SCALE) |
|
||||
BIT(IIO_CHAN_INFO_INT_TIME) |
|
||||
BIT(IIO_CHAN_INFO_OFFSET),
|
||||
},
|
||||
{
|
||||
.type = IIO_HUMIDITYRELATIVE,
|
||||
.address = HDC100X_REG_HUMIDITY,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||||
BIT(IIO_CHAN_INFO_SCALE) |
|
||||
BIT(IIO_CHAN_INFO_INT_TIME)
|
||||
},
|
||||
{
|
||||
.type = IIO_CURRENT,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||||
.extend_name = "heater",
|
||||
.output = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static int hdc100x_update_config(struct hdc100x_data *data, int mask, int val)
|
||||
{
|
||||
int tmp = (~mask & data->config) | val;
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_write_word_swapped(data->client,
|
||||
HDC100X_REG_CONFIG, tmp);
|
||||
if (!ret)
|
||||
data->config = tmp;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int hdc100x_set_it_time(struct hdc100x_data *data, int chan, int val2)
|
||||
{
|
||||
int shift = hdc100x_resolution_shift[chan].shift;
|
||||
int ret = -EINVAL;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(hdc100x_int_time[chan]); i++) {
|
||||
if (val2 && val2 == hdc100x_int_time[chan][i]) {
|
||||
ret = hdc100x_update_config(data,
|
||||
hdc100x_resolution_shift[chan].mask << shift,
|
||||
i << shift);
|
||||
if (!ret)
|
||||
data->adc_int_us[chan] = val2;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int hdc100x_get_measurement(struct hdc100x_data *data,
|
||||
struct iio_chan_spec const *chan)
|
||||
{
|
||||
struct i2c_client *client = data->client;
|
||||
int delay = data->adc_int_us[chan->address];
|
||||
int ret;
|
||||
int val;
|
||||
|
||||
/* start measurement */
|
||||
ret = i2c_smbus_write_byte(client, chan->address);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "cannot start measurement");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* wait for integration time to pass */
|
||||
usleep_range(delay, delay + 1000);
|
||||
|
||||
/*
|
||||
* i2c_smbus_read_word_data cannot() be used here due to the command
|
||||
* value not being understood and causes NAKs preventing any reading
|
||||
* from being accessed.
|
||||
*/
|
||||
ret = i2c_smbus_read_byte(client);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "cannot read high byte measurement");
|
||||
return ret;
|
||||
}
|
||||
val = ret << 6;
|
||||
|
||||
ret = i2c_smbus_read_byte(client);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "cannot read low byte measurement");
|
||||
return ret;
|
||||
}
|
||||
val |= ret >> 2;
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static int hdc100x_get_heater_status(struct hdc100x_data *data)
|
||||
{
|
||||
return !!(data->config & HDC100X_REG_CONFIG_HEATER_EN);
|
||||
}
|
||||
|
||||
static int hdc100x_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan, int *val,
|
||||
int *val2, long mask)
|
||||
{
|
||||
struct hdc100x_data *data = iio_priv(indio_dev);
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW: {
|
||||
int ret;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
if (chan->type == IIO_CURRENT) {
|
||||
*val = hdc100x_get_heater_status(data);
|
||||
ret = IIO_VAL_INT;
|
||||
} else {
|
||||
ret = hdc100x_get_measurement(data, chan);
|
||||
if (ret >= 0) {
|
||||
*val = ret;
|
||||
ret = IIO_VAL_INT;
|
||||
}
|
||||
}
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
}
|
||||
case IIO_CHAN_INFO_INT_TIME:
|
||||
*val = 0;
|
||||
*val2 = data->adc_int_us[chan->address];
|
||||
return IIO_VAL_INT_PLUS_MICRO;
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
if (chan->type == IIO_TEMP) {
|
||||
*val = 165;
|
||||
*val2 = 65536 >> 2;
|
||||
return IIO_VAL_FRACTIONAL;
|
||||
} else {
|
||||
*val = 0;
|
||||
*val2 = 10000;
|
||||
return IIO_VAL_INT_PLUS_MICRO;
|
||||
}
|
||||
break;
|
||||
case IIO_CHAN_INFO_OFFSET:
|
||||
*val = -40;
|
||||
return IIO_VAL_INT;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static int hdc100x_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val, int val2, long mask)
|
||||
{
|
||||
struct hdc100x_data *data = iio_priv(indio_dev);
|
||||
int ret = -EINVAL;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_INT_TIME:
|
||||
if (val != 0)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
ret = hdc100x_set_it_time(data, chan->address, val2);
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
if (chan->type != IIO_CURRENT || val2 != 0)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_HEATER_EN,
|
||||
val ? HDC100X_REG_CONFIG_HEATER_EN : 0);
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_info hdc100x_info = {
|
||||
.read_raw = hdc100x_read_raw,
|
||||
.write_raw = hdc100x_write_raw,
|
||||
.attrs = &hdc100x_attribute_group,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int hdc100x_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct iio_dev *indio_dev;
|
||||
struct hdc100x_data *data;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
|
||||
return -ENODEV;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
data->client = client;
|
||||
mutex_init(&data->lock);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->name = dev_name(&client->dev);
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &hdc100x_info;
|
||||
|
||||
indio_dev->channels = hdc100x_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(hdc100x_channels);
|
||||
|
||||
/* be sure we are in a known state */
|
||||
hdc100x_set_it_time(data, 0, hdc100x_int_time[0][0]);
|
||||
hdc100x_set_it_time(data, 1, hdc100x_int_time[1][0]);
|
||||
|
||||
return devm_iio_device_register(&client->dev, indio_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id hdc100x_id[] = {
|
||||
{ "hdc100x", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, hdc100x_id);
|
||||
|
||||
static struct i2c_driver hdc100x_driver = {
|
||||
.driver = {
|
||||
.name = "hdc100x",
|
||||
},
|
||||
.probe = hdc100x_probe,
|
||||
.id_table = hdc100x_id,
|
||||
};
|
||||
module_i2c_driver(hdc100x_driver);
|
||||
|
||||
MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
|
||||
MODULE_DESCRIPTION("TI HDC100x humidity and temperature sensor driver");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in a new issue