ARM: imx: improve the comment of CCM lpm SW workaround

Improve the comment of SW workaround for CCM lpm issue using
hardware errata description to avoid confusion.

ERR007265: CCM: When improper low-power sequence is used, the SoC
enters low power mode before the ARM core executes WFI.

Software workaround:
1) Software should trigger IRQ #32 (IOMUX) to be always pending
   by setting IOMUX_GPR1_GINT.
2) Software should then unmask IRQ #32 in GPC before setting CCM
   Low-Power mode.
3) Software should mask IRQ #32 right after CCM Low-Power mode is
   set (set bits 0-1 of CCM_CLPCR).

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Anson Huang 2013-12-24 17:19:21 -05:00 committed by Shawn Guo
parent b4e844f019
commit 48c9584111

View file

@ -156,10 +156,16 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
}
/*
* Unmask the always pending IOMUXC interrupt #32 as wakeup source to
* deassert dsm_request signal, so that we can ensure dsm_request
* is not asserted when we're going to write CLPCR register to set LPM.
* After setting up LPM bits, we need to mask this wakeup source.
* ERR007265: CCM: When improper low-power sequence is used,
* the SoC enters low power mode before the ARM core executes WFI.
*
* Software workaround:
* 1) Software should trigger IRQ #32 (IOMUX) to be always pending
* by setting IOMUX_GPR1_GINT.
* 2) Software should then unmask IRQ #32 in GPC before setting CCM
* Low-Power mode.
* 3) Software should mask IRQ #32 right after CCM Low-Power mode
* is set (set bits 0-1 of CCM_CLPCR).
*/
iomuxc_irq_desc = irq_to_desc(32);
imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
@ -219,6 +225,8 @@ void __init imx6q_pm_init(void)
WARN_ON(!ccm_base);
/*
* This is for SW workaround step #1 of ERR007265, see comments
* in imx6q_set_lpm for details of this errata.
* Force IOMUXC irq pending, so that the interrupt to GPC can be
* used to deassert dsm_request signal when the signal gets
* asserted unexpectedly.