redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

Linux 4.15-rc8 

-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
 E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
 /bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
 g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
 IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
 I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
 =o5gx
 -----END PGP SIGNATURE-----

BackMerge tag 'v4.15-rc8' into drm-next

Linux 4.15-rc8

Daniel requested this for so the intel CI won't fall over on drm-next
so often.
zero-colors
Dave Airlie 2018-01-18 09:32:15 +10:00
parent 8563188e37 a8750ddca9
commit 4a6cc7a44e
820 changed files with 11809 additions and 3903 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.mailmap
View File

@ -107,6 +107,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
Mark Brown <broonie@sirena.org.uk>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
Matthieu CASTET <castet.matthieu@free.fr>

16
Documentation/ABI/testing/sysfs-devices-system-cpu
View File

@ -375,3 +375,19 @@ Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: information about CPUs heterogeneity.
cpu_capacity: capacity of cpu#.
What: /sys/devices/system/cpu/vulnerabilities
/sys/devices/system/cpu/vulnerabilities/meltdown
/sys/devices/system/cpu/vulnerabilities/spectre_v1
/sys/devices/system/cpu/vulnerabilities/spectre_v2
Date: January 2018
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Information about CPU vulnerabilities
The files are named after the code names of CPU
vulnerabilities. The output of those files reflects the
state of the CPUs in the system. Possible output values:
"Not affected" CPU is not affected by the vulnerability
"Vulnerable" CPU is affected and no mitigation in effect
"Mitigation: $M" CPU is affected and mitigation $M is in effect

1
Documentation/admin-guide/kernel-parameters.rst
View File

@ -109,6 +109,7 @@ parameter is applicable::
IPV6 IPv6 support is enabled.
ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
ISOL CPU Isolation is enabled.
JOY Appropriate joystick support is enabled.
KGDB Kernel debugger support is enabled.
KVM Kernel Virtual Machine support is enabled.

62
Documentation/admin-guide/kernel-parameters.txt
View File

@ -328,11 +328,15 @@
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
apic= [APIC,X86] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
when initialising the APIC and IO-APIC components.
For X86-32, this can also be used to specify an APIC
driver name.
Format: apic=driver_name
Examples: apic=bigsmp
apic_extnmi= [APIC,X86] External NMI delivery setting
Format: { bsp (default) | all | none }
@ -709,9 +713,6 @@
It will be ignored when crashkernel=X,high is not used
or memory reserved is below 4G.
crossrelease_fullstack
[KNL] Allow to record full stack trace in cross-release
cryptomgr.notests
[KNL] Disable crypto self-tests
@ -1737,7 +1738,7 @@
isapnp= [ISAPNP]
Format: <RDP>,<reset>,<pci_scan>,<verbosity>
isolcpus= [KNL,SMP] Isolate a given set of CPUs from disturbance.
isolcpus= [KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance.
[Deprecated - use cpusets instead]
Format: [flag-list,]<cpu-list>
@ -2622,6 +2623,11 @@
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
Equivalent to smt=1.
nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2
(indirect branch prediction) vulnerability. System may
allow data leaks with this option, which is equivalent
to spectre_v2=off.
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
@ -2662,7 +2668,7 @@
Valid arguments: on, off
Default: on
nohz_full= [KNL,BOOT]
nohz_full= [KNL,BOOT,SMP,ISOL]
The argument is a cpu list, as described above.
In kernels built with CONFIG_NO_HZ_FULL=y, set
the specified list of CPUs whose tick will be stopped
@ -3094,6 +3100,12 @@
pcie_scan_all Scan all possible PCIe devices. Otherwise we
only look for one device below a PCIe downstream
port.
big_root_window Try to add a big 64bit memory window to the PCIe
root complex on AMD CPUs. Some GFX hardware
can resize a BAR to allow access to all VRAM.
Adding the window is slightly risky (it may
conflict with unreported devices), so this
taints the kernel.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
@ -3282,6 +3294,21 @@
pt. [PARIDE]
See Documentation/blockdev/paride.txt.
pti= [X86_64] Control Page Table Isolation of user and
kernel address spaces. Disabling this feature
removes hardening, but improves performance of
system calls and interrupts.
on - unconditionally enable
off - unconditionally disable
auto - kernel detects whether your CPU model is
vulnerable to issues that PTI mitigates
Not specifying this option is equivalent to pti=auto.
nopti [X86_64]
Equivalent to pti=off
pty.legacy_count=
[KNL] Number of legacy pty's. Overwrites compiled-in
default number.
@ -3931,6 +3958,29 @@
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt
spectre_v2= [X86] Control mitigation of Spectre variant 2
(indirect branch speculation) vulnerability.
on - unconditionally enable
off - unconditionally disable
auto - kernel detects whether your CPU model is
vulnerable
Selecting 'on' will, and 'auto' may, choose a
mitigation method at run time according to the
CPU, the available microcode, the setting of the
CONFIG_RETPOLINE configuration option, and the
compiler with which the kernel was built.
Specific mitigations can also be selected manually:
retpoline - replace indirect branches
retpoline,generic - google's original retpoline
retpoline,amd - AMD-specific minimal thunk
Not specifying this option is equivalent to
spectre_v2=auto.
spia_io_base= [HW,MTD]
spia_fio_base=
spia_pedr=

2
Documentation/admin-guide/thunderbolt.rst
View File

@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with
a sysfs attribute called "force_power".
For example the intel-wmi-thunderbolt driver exposes this attribute in:
/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
/sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
To force the power to on, write 1 to this attribute file.
To disable force power, write 0 to this attribute file.

2
Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
View File

@ -13,7 +13,6 @@ Required properties:
at25df321a
at25df641
at26df081a
en25s64
mr25h128
mr25h256
mr25h10
@ -33,7 +32,6 @@ Required properties:
s25fl008k
s25fl064k
sst25vf040b
sst25wf040b
m25p40
m25p80
m25p16

2
Documentation/devicetree/bindings/sound/da7218.txt
View File

@ -73,7 +73,7 @@ Example:
compatible = "dlg,da7218";
reg = <0x1a>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
VDD-supply = <&reg_audio>;

2
Documentation/devicetree/bindings/sound/da7219.txt
View File

@ -77,7 +77,7 @@ Example:
reg = <0x1a>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
VDD-supply = <&reg_audio>;
VDDMIC-supply = <&reg_audio>;

18
Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
View File

@ -12,24 +12,30 @@ Required properties:
- "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
- reg : Offset and length of the register set for the device
- interrupts : Should contain CSPI/eCSPI interrupt
- cs-gpios : Specifies the gpio pins to be used for chipselects.
- clocks : Clock specifiers for both ipg and per clocks.
- clock-names : Clock names should include both "ipg" and "per"
See the clock consumer binding,
Documentation/devicetree/bindings/clock/clock-bindings.txt
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
Obsolete properties:
- fsl,spi-num-chipselects : Contains the number of the chipselect
Recommended properties:
- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip
select lines can be used, they appear to always generate a pulse between each
word of a transfer. Most use cases will require GPIO based chip selects to
generate a valid transaction.
Optional properties:
- num-cs : Number of total chip selects, see spi-bus.txt.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt.
- dma-names: DMA request names, if present, should include "tx" and "rx".
- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
the SPI_READY mode-flag needs to be set too.
Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
Obsolete properties:
- fsl,spi-num-chipselects : Contains the number of the chipselect
Example:
ecspi@70010000 {

4
Documentation/filesystems/nilfs2.txt
View File

@ -25,8 +25,8 @@ available from the following download page. At least "mkfs.nilfs2",
cleaner or garbage collector) are required. Details on the tools are
described in the man pages included in the package.
Project web page: http://nilfs.sourceforge.net/
Download page: http://nilfs.sourceforge.net/en/download.html
Project web page: https://nilfs.sourceforge.io/
Download page: https://nilfs.sourceforge.io/en/download.html
List info: http://vger.kernel.org/vger-lists.html#linux-nilfs
Caveats

23
Documentation/kbuild/kconfig-language.txt
View File

@ -200,10 +200,14 @@ module state. Dependency expressions have the following syntax:
<expr> ::= <symbol> (1)
<symbol> '=' <symbol> (2)
<symbol> '!=' <symbol> (3)
'(' <expr> ')' (4)
'!' <expr> (5)
<expr> '&&' <expr> (6)
<expr> '||' <expr> (7)
<symbol1> '<' <symbol2> (4)
<symbol1> '>' <symbol2> (4)
<symbol1> '<=' <symbol2> (4)
<symbol1> '>=' <symbol2> (4)
'(' <expr> ')' (5)
'!' <expr> (6)
<expr> '&&' <expr> (7)
<expr> '||' <expr> (8)
Expressions are listed in decreasing order of precedence.
@ -214,10 +218,13 @@ Expressions are listed in decreasing order of precedence.
otherwise 'n'.
(3) If the values of both symbols are equal, it returns 'n',
otherwise 'y'.
(4) Returns the value of the expression. Used to override precedence.
(5) Returns the result of (2-/expr/).
(6) Returns the result of min(/expr/, /expr/).
(7) Returns the result of max(/expr/, /expr/).
(4) If value of <symbol1> is respectively lower, greater, lower-or-equal,
or greater-or-equal than value of <symbol2>, it returns 'y',
otherwise 'n'.
(5) Returns the value of the expression. Used to override precedence.
(6) Returns the result of (2-/expr/).
(7) Returns the result of min(/expr/, /expr/).
(8) Returns the result of max(/expr/, /expr/).
An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2
respectively for calculations). A menu entry becomes visible when its

2
Documentation/networking/index.rst
View File

@ -9,6 +9,7 @@ Contents:
batman-adv
kapi
z8530book
msg_zerocopy
.. only:: subproject
@ -16,4 +17,3 @@ Contents:
=======
* :ref:`genindex`

4
Documentation/networking/msg_zerocopy.rst
View File

@ -72,6 +72,10 @@ this flag, a process must first signal intent by setting a socket option:
if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &one, sizeof(one)))
error(1, errno, "setsockopt zerocopy");
Setting the socket option only works when the socket is in its initial
(TCP_CLOSED) state. Trying to set the option for a socket returned by accept(),
for example, will lead to an EBUSY error. In this case, the option should be set
to the listening socket and it will be inherited by the accepted sockets.
Transmission
------------

2
Documentation/usb/gadget-testing.txt
View File

@ -693,7 +693,7 @@ such specification consists of a number of lines with an inverval value
in each line. The rules stated above are best illustrated with an example:
# mkdir functions/uvc.usb0/control/header/h
# cd functions/uvc.usb0/control/header/h
# cd functions/uvc.usb0/control/
# ln -s header/h class/fs
# ln -s header/h class/ss
# mkdir -p functions/uvc.usb0/streaming/uncompressed/u/360p

186
Documentation/x86/pti.txt 100644
View File

@ -0,0 +1,186 @@
Overview
========
Page Table Isolation (pti, previously known as KAISER[1]) is a
countermeasure against attacks on the shared user/kernel address
space such as the "Meltdown" approach[2].
To mitigate this class of attacks, we create an independent set of
page tables for use only when running userspace applications. When
the kernel is entered via syscalls, interrupts or exceptions, the
page tables are switched to the full "kernel" copy. When the system
switches back to user mode, the user copy is used again.
The userspace page tables contain only a minimal amount of kernel
data: only what is needed to enter/exit the kernel such as the
entry/exit functions themselves and the interrupt descriptor table
(IDT). There are a few strictly unnecessary things that get mapped
such as the first C function when entering an interrupt (see
comments in pti.c).
This approach helps to ensure that side-channel attacks leveraging
the paging structures do not function when PTI is enabled. It can be
enabled by setting CONFIG_PAGE_TABLE_ISOLATION=y at compile time.
Once enabled at compile-time, it can be disabled at boot with the
'nopti' or 'pti=' kernel parameters (see kernel-parameters.txt).
Page Table Management
=====================
When PTI is enabled, the kernel manages two sets of page tables.
The first set is very similar to the single set which is present in
kernels without PTI. This includes a complete mapping of userspace
that the kernel can use for things like copy_to_user().
Although _complete_, the user portion of the kernel page tables is
crippled by setting the NX bit in the top level. This ensures
that any missed kernel->user CR3 switch will immediately crash
userspace upon executing its first instruction.
The userspace page tables map only the kernel data needed to enter
and exit the kernel. This data is entirely contained in the 'struct
cpu_entry_area' structure which is placed in the fixmap which gives
each CPU's copy of the area a compile-time-fixed virtual address.
For new userspace mappings, the kernel makes the entries in its
page tables like normal. The only difference is when the kernel
makes entries in the top (PGD) level. In addition to setting the
entry in the main kernel PGD, a copy of the entry is made in the
userspace page tables' PGD.
This sharing at the PGD level also inherently shares all the lower
layers of the page tables. This leaves a single, shared set of
userspace page tables to manage. One PTE to lock, one set of
accessed bits, dirty bits, etc...
Overhead
========
Protection against side-channel attacks is important. But,
this protection comes at a cost:
1. Increased Memory Use
a. Each process now needs an order-1 PGD instead of order-0.
(Consumes an additional 4k per process).
b. The 'cpu_entry_area' structure must be 2MB in size and 2MB
aligned so that it can be mapped by setting a single PMD
entry. This consumes nearly 2MB of RAM once the kernel
is decompressed, but no space in the kernel image itself.
2. Runtime Cost
a. CR3 manipulation to switch between the page table copies
must be done at interrupt, syscall, and exception entry
and exit (it can be skipped when the kernel is interrupted,
though.) Moves to CR3 are on the order of a hundred
cycles, and are required at every entry and exit.
b. A "trampoline" must be used for SYSCALL entry. This
trampoline depends on a smaller set of resources than the
non-PTI SYSCALL entry code, so requires mapping fewer
things into the userspace page tables. The downside is
that stacks must be switched at entry time.
d. Global pages are disabled for all kernel structures not
mapped into both kernel and userspace page tables. This
feature of the MMU allows different processes to share TLB
entries mapping the kernel. Losing the feature means more
TLB misses after a context switch. The actual loss of
performance is very small, however, never exceeding 1%.
d. Process Context IDentifiers (PCID) is a CPU feature that
allows us to skip flushing the entire TLB when switching page
tables by setting a special bit in CR3 when the page tables
are changed. This makes switching the page tables (at context
switch, or kernel entry/exit) cheaper. But, on systems with
PCID support, the context switch code must flush both the user
and kernel entries out of the TLB. The user PCID TLB flush is
deferred until the exit to userspace, minimizing the cost.
See intel.com/sdm for the gory PCID/INVPCID details.
e. The userspace page tables must be populated for each new
process. Even without PTI, the shared kernel mappings
are created by copying top-level (PGD) entries into each
new process. But, with PTI, there are now *two* kernel
mappings: one in the kernel page tables that maps everything
and one for the entry/exit structures. At fork(), we need to
copy both.
f. In addition to the fork()-time copying, there must also
be an update to the userspace PGD any time a set_pgd() is done
on a PGD used to map userspace. This ensures that the kernel
and userspace copies always map the same userspace
memory.
g. On systems without PCID support, each CR3 write flushes
the entire TLB. That means that each syscall, interrupt
or exception flushes the TLB.
h. INVPCID is a TLB-flushing instruction which allows flushing
of TLB entries for non-current PCIDs. Some systems support
PCIDs, but do not support INVPCID. On these systems, addresses
can only be flushed from the TLB for the current PCID. When
flushing a kernel address, we need to flush all PCIDs, so a
single kernel address flush will require a TLB-flushing CR3
write upon the next use of every PCID.
Possible Future Work
====================
1. We can be more careful about not actually writing to CR3
unless its value is actually changed.
2. Allow PTI to be enabled/disabled at runtime in addition to the
boot-time switching.
Testing
========
To test stability of PTI, the following test procedure is recommended,
ideally doing all of these in parallel:
1. Set CONFIG_DEBUG_ENTRY=y
2. Run several copies of all of the tools/testing/selftests/x86/ tests
(excluding MPX and protection_keys) in a loop on multiple CPUs for
several minutes. These tests frequently uncover corner cases in the
kernel entry code. In general, old kernels might cause these tests
themselves to crash, but they should never crash the kernel.
3. Run the 'perf' tool in a mode (top or record) that generates many
frequent performance monitoring non-maskable interrupts (see "NMI"
in /proc/interrupts). This exercises the NMI entry/exit code which
is known to trigger bugs in code paths that did not expect to be
interrupted, including nested NMIs. Using "-c" boosts the rate of
NMIs, and using two -c with separate counters encourages nested NMIs
and less deterministic behavior.
while true; do perf record -c 10000 -e instructions,cycles -a sleep 10; done
4. Launch a KVM virtual machine.
5. Run 32-bit binaries on systems supporting the SYSCALL instruction.
This has been a lightly-tested code path and needs extra scrutiny.
Debugging
=========
Bugs in PTI cause a few different signatures of crashes
that are worth noting here.
* Failures of the selftests/x86 code. Usually a bug in one of the
more obscure corners of entry_64.S
* Crashes in early boot, especially around CPU bringup. Bugs
in the trampoline code or mappings cause these.
* Crashes at the first interrupt. Caused by bugs in entry_64.S,
like screwing up a page table switch. Also caused by
incorrectly mapping the IRQ handler entry code.
* Crashes at the first NMI. The NMI code is separate from main
interrupt handlers and can have bugs that do not affect
normal interrupts. Also caused by incorrectly mapping NMI
code. NMIs that interrupt the entry code must be very
careful and can be the cause of crashes that show up when
running perf.
* Kernel crashes at the first exit to userspace. entry_64.S
bugs, or failing to map some of the exit code.
* Crashes at first interrupt that interrupts userspace. The paths
in entry_64.S that return to userspace are sometimes separate
from the ones that return to the kernel.
* Double faults: overflowing the kernel stack because of page
faults upon page faults. Caused by touching non-pti-mapped
data in the entry code, or forgetting to switch to kernel
CR3 before calling into C functions which are not pti-mapped.
* Userspace segfaults early in boot, sometimes manifesting
as mount(8) failing to mount the rootfs. These have
tended to be TLB invalidation issues. Usually invalidating
the wrong PCID, or otherwise missing an invalidation.
1. https://gruss.cc/files/kaiser.pdf
2. https://meltdownattack.com/meltdown.pdf

37
Documentation/x86/x86_64/mm.txt
View File

@ -1,6 +1,4 @@
<previous description obsolete, deleted>
Virtual memory map with 4 level page tables:
0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
@ -14,13 +12,17 @@ ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
... unused hole ...
ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
... unused hole ...
vaddr_end for KASLR
fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
fffffe8000000000 - fffffeffffffffff (=39 bits) LDT remap for PTI
ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
... unused hole ...
ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space (variable)
ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
ffffffffa0000000 - [fixmap start] (~1526 MB) module mapping space (variable)
[fixmap start] - ffffffffff5fffff kernel-internal fixmap range
ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
Virtual memory map with 5 level page tables:
@ -29,26 +31,31 @@ Virtual memory map with 5 level page tables:
hole caused by [56:63] sign extension
ff00000000000000 - ff0fffffffffffff (=52 bits) guard hole, reserved for hypervisor
ff10000000000000 - ff8fffffffffffff (=55 bits) direct mapping of all phys. memory
ff90000000000000 - ff91ffffffffffff (=49 bits) hole
ff92000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space
ff90000000000000 - ff9fffffffffffff (=52 bits) LDT remap for PTI
ffa0000000000000 - ffd1ffffffffffff (=54 bits) vmalloc/ioremap space (12800 TB)
ffd2000000000000 - ffd3ffffffffffff (=49 bits) hole
ffd4000000000000 - ffd5ffffffffffff (=49 bits) virtual memory map (512TB)
... unused hole ...
ffdf000000000000 - fffffc0000000000 (=53 bits) kasan shadow memory (8PB)
... unused hole ...
vaddr_end for KASLR
fffffe0000000000 - fffffe7fffffffff (=39 bits) cpu_entry_area mapping
... unused hole ...
ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
... unused hole ...
ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
[fixmap start] - ffffffffff5fffff kernel-internal fixmap range
ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
Architecture defines a 64-bit virtual address. Implementations can support
less. Currently supported are 48- and 57-bit virtual addresses. Bits 63
through to the most-significant implemented bit are set to either all ones
or all zero. This causes hole between user space and kernel addresses.
through to the most-significant implemented bit are sign extended.
This causes hole between user space and kernel addresses if you interpret them
as unsigned.
The direct mapping covers all memory in the system up to the highest
memory address (this means in some cases it can also include PCI memory
@ -58,19 +65,15 @@ vmalloc space is lazily synchronized into the different PML4/PML5 pages of
the processes using the page fault handler, with init_top_pgt as
reference.
Current X86-64 implementations support up to 46 bits of address space (64 TB),
which is our current limit. This expands into MBZ space in the page tables.
We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
memory window (this size is arbitrary, it can be raised later if needed).
The mappings are not part of any other kernel PGD and are only available
during EFI runtime calls.
The module mapping space size changes based on the CONFIG requirements for the
following fixmap section.
Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all
physical memory, vmalloc/ioremap space and virtual memory map are randomized.
Their order is preserved but their base will be offset early at boot time.
-Andi Kleen, Jul 2004
Be very careful vs. KASLR when changing anything here. The KASLR address
range must not overlap with anything except the KASAN shadow area, which is
correct as KASAN disables KASLR.

30
MAINTAINERS
View File

@ -2621,24 +2621,22 @@ F: fs/bfs/
F: include/uapi/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
M: Steven Miao <realmz6@gmail.com>
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
T: git git://git.code.sf.net/p/adi-linux/code
W: http://blackfin.uclinux.org
S: Supported
S: Orphan
F: arch/blackfin/
BLACKFIN EMAC DRIVER
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org
S: Supported
S: Orphan
F: drivers/net/ethernet/adi/
BLACKFIN MEDIA DRIVER
M: Scott Jiang <scott.jiang.linux@gmail.com>
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org/
S: Supported
S: Orphan
F: drivers/media/platform/blackfin/
F: drivers/media/i2c/adv7183*
F: drivers/media/i2c/vs6624*
@ -2646,25 +2644,25 @@ F: drivers/media/i2c/vs6624*
BLACKFIN RTC DRIVER
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org
S: Supported
S: Orphan
F: drivers/rtc/rtc-bfin.c
BLACKFIN SDH DRIVER
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org
S: Supported
S: Orphan
F: drivers/mmc/host/bfin_sdh.c
BLACKFIN SERIAL DRIVER
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org
S: Supported
S: Orphan
F: drivers/tty/serial/bfin_uart.c
BLACKFIN WATCHDOG DRIVER
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org
S: Supported
S: Orphan
F: drivers/watchdog/bfin_wdt.c
BLINKM RGB LED DRIVER
@ -5173,15 +5171,15 @@ F: sound/usb/misc/ua101.c
EFI TEST DRIVER
L: linux-efi@vger.kernel.org
M: Ivan Hu <ivan.hu@canonical.com>
M: Matt Fleming <matt@codeblueprint.co.uk>
M: Ard Biesheuvel <ard.biesheuvel@linaro.org>
S: Maintained
F: drivers/firmware/efi/test/
EFI VARIABLE FILESYSTEM
M: Matthew Garrett <matthew.garrett@nebula.com>
M: Jeremy Kerr <jk@ozlabs.org>
M: Matt Fleming <matt@codeblueprint.co.uk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
M: Ard Biesheuvel <ard.biesheuvel@linaro.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
L: linux-efi@vger.kernel.org
S: Maintained
F: fs/efivarfs/
@ -5342,7 +5340,6 @@ S: Supported
F: security/integrity/evm/
EXTENSIBLE FIRMWARE INTERFACE (EFI)
M: Matt Fleming <matt@codeblueprint.co.uk>
M: Ard Biesheuvel <ard.biesheuvel@linaro.org>
L: linux-efi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
@ -9663,8 +9660,8 @@ F: include/uapi/linux/sunrpc/
NILFS2 FILESYSTEM
M: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
L: linux-nilfs@vger.kernel.org
W: http://nilfs.sourceforge.net/
W: http://nilfs.osdn.jp/
W: https://nilfs.sourceforge.io/
W: https://nilfs.osdn.jp/
T: git git://github.com/konis/nilfs2.git
S: Supported
F: Documentation/filesystems/nilfs2.txt
@ -10159,7 +10156,7 @@ F: drivers/irqchip/irq-ompic.c
F: drivers/irqchip/irq-or1k-*
OPENVSWITCH
M: Pravin Shelar <pshelar@nicira.com>
M: Pravin B Shelar <pshelar@ovn.org>
L: netdev@vger.kernel.org
L: dev@openvswitch.org
W: http://openvswitch.org
@ -13516,6 +13513,7 @@ M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Yehezkel Bernat <yehezkel.bernat@intel.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
S: Maintained
F: Documentation/admin-guide/thunderbolt.rst
F: drivers/thunderbolt/
F: include/linux/thunderbolt.h

48
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 4
PATCHLEVEL = 15
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc8
NAME = Fearless Coyote
# *DOCUMENTATION*
@ -484,26 +484,6 @@ CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
endif
KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
# Quiet clang warning: comparison of unsigned expression < 0 is always false
KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
# source of a reference will be _MergedGlobals and not on of the whitelisted names.
# See modpost pattern 2
KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
else
# These warnings generated too much noise in a regular build.
# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
endif
ifeq ($(config-targets),1)
@ -716,6 +696,29 @@ ifdef CONFIG_CC_STACKPROTECTOR
endif
KBUILD_CFLAGS += $(stackp-flag)
ifeq ($(cc-name),clang)
KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
# Quiet clang warning: comparison of unsigned expression < 0 is always false
KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
# source of a reference will be _MergedGlobals and not on of the whitelisted names.
# See modpost pattern 2
KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
else
# These warnings generated too much noise in a regular build.
# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
else
@ -789,6 +792,9 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
# Make sure -fstack-check isn't enabled (like gentoo apparently did)
KBUILD_CFLAGS += $(call cc-option,-fno-stack-check,)
# conserve stack if available
KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)

8
arch/arc/boot/dts/axc003.dtsi
View File

@ -35,6 +35,14 @@
reg = <0x80 0x10>, <0x100 0x10>;
#clock-cells = <0>;
clocks = <&input_clk>;
/*
* Set initial core pll output frequency to 90MHz.
* It will be applied at the core pll driver probing
* on early boot.
*/
assigned-clocks = <&core_clk>;
assigned-clock-rates = <90000000>;
};
core_intc: archs-intc@cpu {

8
arch/arc/boot/dts/axc003_idu.dtsi
View File

@ -35,6 +35,14 @@
reg = <0x80 0x10>, <0x100 0x10>;
#clock-cells = <0>;
clocks = <&input_clk>;
/*
* Set initial core pll output frequency to 100MHz.
* It will be applied at the core pll driver probing
* on early boot.
*/
assigned-clocks = <&core_clk>;
assigned-clock-rates = <100000000>;
};
core_intc: archs-intc@cpu {

8
arch/arc/boot/dts/hsdk.dts
View File

@ -114,6 +114,14 @@
reg = <0x00 0x10>, <0x14B8 0x4>;
#clock-cells = <0>;
clocks = <&input_clk>;
/*
* Set initial core pll output frequency to 1GHz.
* It will be applied at the core pll driver probing
* on early boot.
*/
assigned-clocks = <&core_clk>;
assigned-clock-rates = <1000000000>;
};
serial: serial@5000 {

5
arch/arc/configs/hsdk_defconfig
View File

@ -49,10 +49,11 @@ CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_DRM=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_UDL=y
CONFIG_FB=y
CONFIG_FB_UDL=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y

5
arch/arc/include/asm/uaccess.h
View File

@ -668,6 +668,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
return 0;
__asm__ __volatile__(
" mov lp_count, %5 \n"
" lp 3f \n"
"1: ldb.ab %3, [%2, 1] \n"
" breq.d %3, 0, 3f \n"
@ -684,8 +685,8 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
" .word 1b, 4b \n"
" .previous \n"
: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
: "g"(-EFAULT), "l"(count)
: "memory");
: "g"(-EFAULT), "r"(count)
: "lp_count", "lp_start", "lp_end", "memory");
return res;
}

2
arch/arc/kernel/setup.c
View File

@ -199,7 +199,7 @@ static void read_arc_build_cfg_regs(void)
unsigned int exec_ctrl;
READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
cpu->extn.dual_enb = exec_ctrl & 1;
cpu->extn.dual_enb = !(exec_ctrl & 1);
/* dual issue always present for this core */
cpu->extn.dual = 1;

2
arch/arc/kernel/stacktrace.c
View File

@ -163,7 +163,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
*/
static int __print_sym(unsigned int address, void *unused)
{
__print_symbol(" %s\n", address);
printk(" %pS\n", (void *)address);
return 0;
}

14
arch/arc/kernel/traps.c
View File

@ -83,6 +83,7 @@ DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC)
DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", __weak do_memory_error, BUS_ADRERR)
DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
DO_ERROR_INFO(SIGSEGV, "gcc generated __builtin_trap", do_trap5_error, 0)
/*
* Entry Point for Misaligned Data access Exception, for emulating in software
@ -115,6 +116,8 @@ void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
* Thus TRAP_S <n> can be used for specific purpose
* -1 used for software breakpointing (gdb)
* -2 used by kprobes
* -5 __builtin_trap() generated by gcc (2018.03 onwards) for toggle such as
* -fno-isolate-erroneous-paths-dereference
*/
void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
{
@ -134,6 +137,9 @@ void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
kgdb_trap(regs);
break;
case 5:
do_trap5_error(address, regs);
break;
default:
break;
}
@ -155,3 +161,11 @@ void do_insterror_or_kprobe(unsigned long address, struct pt_regs *regs)
insterror_is_error(address, regs);
}
/*
* abort() call generated by older gcc for __builtin_trap()
*/
void abort(void)
{
__asm__ __volatile__("trap_s 5\n");
}

3
arch/arc/kernel/troubleshoot.c
View File

@ -163,6 +163,9 @@ static void show_ecr_verbose(struct pt_regs *regs)
else
pr_cont("Bus Error, check PRM\n");
#endif
} else if (vec == ECR_V_TRAP) {
if (regs->ecr_param == 5)
pr_cont("gcc generated __builtin_trap\n");
} else {
pr_cont("Check Programmer's Manual\n");
}

18
arch/arc/plat-axs10x/axs10x.c
View File

@ -317,25 +317,23 @@ static void __init axs103_early_init(void)
* Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
* of fudging the freq in DT
*/
#define AXS103_QUAD_CORE_CPU_FREQ_HZ 50000000
unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
if (num_cores > 2) {
u32 freq = 50, orig;
/*
* TODO: use cpu node "cpu-freq" param instead of platform-specific
* "/cpu_card/core_clk" as it works only if we use fixed-clock for cpu.
*/
u32 freq;
int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
const struct fdt_property *prop;
prop = fdt_get_property(initial_boot_params, off,
"clock-frequency", NULL);
orig = be32_to_cpu(*(u32*)(prop->data)) / 1000000;
"assigned-clock-rates", NULL);
freq = be32_to_cpu(*(u32 *)(prop->data));
/* Patching .dtb in-place with new core clock value */
if (freq != orig ) {
freq = cpu_to_be32(freq * 1000000);
if (freq != AXS103_QUAD_CORE_CPU_FREQ_HZ) {
freq = cpu_to_be32(AXS103_QUAD_CORE_CPU_FREQ_HZ);
fdt_setprop_inplace(initial_boot_params, off,
"clock-frequency", &freq, sizeof(freq));
"assigned-clock-rates", &freq, sizeof(freq));
}
}
#endif

42
arch/arc/plat-hsdk/platform.c
View File

@ -38,42 +38,6 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
#define CREG_PAE (CREG_BASE + 0x180)
#define CREG_PAE_UPDATE (CREG_BASE + 0x194)
#define CREG_CORE_IF_CLK_DIV (CREG_BASE + 0x4B8)
#define CREG_CORE_IF_CLK_DIV_2 0x1
#define CGU_BASE ARC_PERIPHERAL_BASE
#define CGU_PLL_STATUS (ARC_PERIPHERAL_BASE + 0x4)
#define CGU_PLL_CTRL (ARC_PERIPHERAL_BASE + 0x0)
#define CGU_PLL_STATUS_LOCK BIT(0)
#define CGU_PLL_STATUS_ERR BIT(1)
#define CGU_PLL_CTRL_1GHZ 0x3A10
#define HSDK_PLL_LOCK_TIMEOUT 500
#define HSDK_PLL_LOCKED() \
!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
#define HSDK_PLL_ERR() \
!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
static void __init hsdk_set_cpu_freq_1ghz(void)
{
u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
/*
* As we set cpu clock which exceeds 500MHz, the divider for the interface
* clock must be programmed to div-by-2.
*/
iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
/* Set cpu clock to 1GHz */
iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
while (!HSDK_PLL_LOCKED() && timeout--)
cpu_relax();
if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
pr_err("Failed to setup CPU frequency to 1GHz!");
}
#define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xA000)
#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108)
#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30)
@ -98,12 +62,6 @@ static void __init hsdk_init_early(void)
* minimum possible div-by-2.
*/
iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
/*
* Setup CPU frequency to 1GHz.
* TODO: remove it after smart hsdk pll driver will be introduced.
*/
hsdk_set_cpu_freq_1ghz();
}
static const char *hsdk_compat[] __initconst = {

2
arch/arm/boot/dts/aspeed-g4.dtsi
View File

@ -219,7 +219,7 @@
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <10>;
interrupts = <8>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";

1
arch/arm/boot/dts/at91-tse850-3.dts
View File

@ -221,6 +221,7 @@
jc42@18 {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x18>;
smbus-timeout-disable;
};
dpot: mcp4651-104@28 {

4
arch/arm/boot/dts/da850-lego-ev3.dts
View File

@ -178,7 +178,7 @@
*/
battery {
pinctrl-names = "default";
pintctrl-0 = <&battery_pins>;
pinctrl-0 = <&battery_pins>;
compatible = "lego,ev3-battery";
io-channels = <&adc 4>, <&adc 3>;
io-channel-names = "voltage", "current";
@ -392,7 +392,7 @@
batt_volt_en {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-low;
output-high;
};
};

4
arch/arm/boot/dts/exynos5800-peach-pi.dts
View File

@ -664,6 +664,10 @@
status = "okay";
};
&mixer {
status = "okay";
};
/* eMMC flash */
&mmc_0 {
status = "okay";

2
arch/arm/boot/dts/ls1021a-qds.dts
View File

@ -215,7 +215,7 @@
reg = <0x2a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&sys_mclk 1>;
clocks = <&sys_mclk>;
};
};
};

2
arch/arm/boot/dts/ls1021a-twr.dts
View File

@ -187,7 +187,7 @@
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&sys_mclk 1>;
clocks = <&sys_mclk>;
};
};

4
arch/arm/boot/dts/rk3066a-marsboard.dts
View File

@ -83,6 +83,10 @@
};
};
&cpu0 {
cpu0-supply = <&vdd_arm>;
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;

2
arch/arm/boot/dts/rk3288.dtsi
View File

@ -956,7 +956,7 @@
iep_mmu: iommu@ff900800 {
compatible = "rockchip,iommu";
reg = <0x0 0xff900800 0x0 0x40>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
#iommu-cells = <0>;
status = "disabled";

4
arch/arm/boot/dts/sun4i-a10.dtsi
View File

@ -502,8 +502,8 @@
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
<&ccu 9>,
<&ccu 18>;
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,

4
arch/arm/boot/dts/sun5i-a10s.dtsi
View File

@ -82,8 +82,8 @@
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
<&ccu 9>,
<&ccu 16>;
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,

4
arch/arm/boot/dts/sun6i-a31.dtsi
View File

@ -429,8 +429,8 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
<&ccu CLK_HDMI_DDC>,
<&ccu 7>,
<&ccu 13>;
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
resets = <&ccu RST_AHB1_HDMI>;
reset-names = "ahb";

4
arch/arm/boot/dts/sun7i-a20.dtsi
View File

@ -581,8 +581,8 @@
reg = <0x01c16000 0x1000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
<&ccu 9>,
<&ccu 18>;
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,

1
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
View File

@ -146,6 +146,7 @@
status = "okay";
axp81x: pmic@3a3 {
compatible = "x-powers,axp813";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

1
arch/arm/boot/dts/tango4-common.dtsi
View File

@ -156,7 +156,6 @@
reg = <0x6e000 0x400>;
ranges = <0 0x6e000 0x400>;
interrupt-parent = <&gic>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <1>;

1
arch/arm/kernel/traps.c
View File

@ -793,7 +793,6 @@ void abort(void)
/* if that doesn't kill us, halt */
panic("Oops failed to kill thread");
}
EXPORT_SYMBOL(abort);
void __init trap_init(void)
{

4
arch/arm/lib/csumpartialcopyuser.S
View File

@ -85,7 +85,11 @@
.pushsection .text.fixup,"ax"
.align 4
9001: mov r4, #-EFAULT
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
ldr r5, [sp, #9*4] @ *err_ptr
#else
ldr r5, [sp, #8*4] @ *err_ptr
#endif
str r4, [r5]
ldmia sp, {r1, r2} @ retrieve dst, len
add r2, r2, r1

29
arch/arm/mach-davinci/dm365.c
View File

@ -868,10 +868,10 @@ static const struct dma_slave_map dm365_edma_map[] = {
{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
};
static struct edma_soc_info dm365_edma_pdata = {
@ -925,12 +925,14 @@ static struct resource edma_resources[] = {
/* not using TC*_ERR */
};
static struct platform_device dm365_edma_device = {
.name = "edma",
.id = 0,
.dev.platform_data = &dm365_edma_pdata,
.num_resources = ARRAY_SIZE(edma_resources),
.resource = edma_resources,
static const struct platform_device_info dm365_edma_device __initconst = {
.name = "edma",
.id = 0,
.dma_mask = DMA_BIT_MASK(32),
.res = edma_resources,
.num_res = ARRAY_SIZE(edma_resources),
.data = &dm365_edma_pdata,
.size_data = sizeof(dm365_edma_pdata),
};
static struct resource dm365_asp_resources[] = {
@ -1428,13 +1430,18 @@ int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
static int __init dm365_init_devices(void)
{
struct platform_device *edma_pdev;
int ret = 0;
if (!cpu_is_davinci_dm365())
return 0;
davinci_cfg_reg(DM365_INT_EDMA_CC);
platform_device_register(&dm365_edma_device);
edma_pdev = platform_device_register_full(&dm365_edma_device);
if (IS_ERR(edma_pdev)) {
pr_warn("%s: Failed to register eDMA\n", __func__);
return PTR_ERR(edma_pdev);
}
platform_device_register(&dm365_mdio_device);
platform_device_register(&dm365_emac_device);

1
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
View File

@ -75,6 +75,7 @@
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};

1
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
View File

@ -77,6 +77,7 @@
pinctrl-0 = <&rmii_pins>;
phy-mode = "rmii";
phy-handle = <&ext_rmii_phy1>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};

3
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
View File

@ -82,6 +82,7 @@
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};
@ -95,7 +96,7 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_vcc1v8>;
bus-width = <8>;
non-removable;

11
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
View File

@ -45,19 +45,10 @@
#include "sun50i-a64.dtsi"
/ {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;

2
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
View File

@ -71,7 +71,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};

1
arch/arm64/boot/dts/renesas/salvator-common.dtsi
View File

@ -255,7 +255,6 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";

1
arch/arm64/boot/dts/renesas/ulcb.dtsi
View File

@ -145,7 +145,6 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";

2
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
View File

@ -132,6 +132,8 @@
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
clock_in_out = "input";
/* shows instability at 1GBit right now */
max-speed = <100>;
phy-supply = <&vcc_io>;
phy-mode = "rgmii";
pinctrl-names = "default";

2
arch/arm64/boot/dts/rockchip/rk3328.dtsi
View File

@ -514,7 +514,7 @@
tsadc: tsadc@ff250000 {
compatible = "rockchip,rk3328-tsadc";
reg = <0x0 0xff250000 0x0 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru SCLK_TSADC>;
assigned-clock-rates = <50000>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;

11
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
View File

@ -155,17 +155,6 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 0>;
regulator-name = "vdd_log";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
status = "okay";
};
};
&cpu_b0 {

4
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
View File

@ -198,8 +198,8 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
<&pinctrl 96 0 0>,
<&pinctrl 160 0 0>;
<&pinctrl 104 0 0>,
<&pinctrl 168 0 0>;
gpio-ranges-group-names = "gpio_range0",
"gpio_range1",
"gpio_range2";

3
arch/arm64/kvm/hyp/debug-sr.c
View File

@ -74,6 +74,9 @@ static void __hyp_text __debug_save_spe_nvhe(u64 *pmscr_el1)
{
u64 reg;
/* Clear pmscr in case of early return */
*pmscr_el1 = 0;
/* SPE present on this CPU? */
if (!cpuid_feature_extract_unsigned_field(read_sysreg(id_aa64dfr0_el1),
ID_AA64DFR0_PMSVER_SHIFT))

2
arch/ia64/kernel/time.c
View File

@ -88,7 +88,7 @@ void vtime_flush(struct task_struct *tsk)
}
if (ti->softirq_time) {
delta = cycle_to_nsec(ti->softirq_time));
delta = cycle_to_nsec(ti->softirq_time);
account_system_index_time(tsk, delta, CPUTIME_SOFTIRQ);
}

1
arch/m32r/kernel/traps.c
View File

@ -122,7 +122,6 @@ void abort(void)
/* if that doesn't kill us, halt */
panic("Oops failed to kill thread");
}
EXPORT_SYMBOL(abort);
void __init trap_init(void)
{

2
arch/mips/kernel/cps-vec.S
View File

@ -235,6 +235,7 @@ LEAF(mips_cps_core_init)
has_mt t0, 3f
.set push
.set MIPS_ISA_LEVEL_RAW
.set mt
/* Only allow 1 TC per VPE to execute... */
@ -388,6 +389,7 @@ LEAF(mips_cps_boot_vpes)
#elif defined(CONFIG_MIPS_MT)
.set push
.set MIPS_ISA_LEVEL_RAW
.set mt
/* If the core doesn't support MT then return */

12
arch/mips/kernel/process.c
View File

@ -705,6 +705,18 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
struct task_struct *t;
int max_users;
/* If nothing to change, return right away, successfully. */
if (value == mips_get_process_fp_mode(task))
return 0;
/* Only accept a mode change if 64-bit FP enabled for o32. */
if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT))
return -EOPNOTSUPP;
/* And only for o32 tasks. */
if (IS_ENABLED(CONFIG_64BIT) && !test_thread_flag(TIF_32BIT_REGS))
return -EOPNOTSUPP;
/* Check the value is valid */
if (value & ~known_bits)
return -EOPNOTSUPP;

153
arch/mips/kernel/ptrace.c
View File

@ -419,25 +419,38 @@ static int gpr64_set(struct task_struct *target,
#endif /* CONFIG_64BIT */
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer,
* !CONFIG_CPU_HAS_MSA variant. FP context's general register slots
* correspond 1:1 to buffer slots. Only general registers are copied.
*/
static int fpr_get_fpa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
void **kbuf, void __user **ubuf)
{
unsigned i;
int err;
return user_regset_copyout(pos, count, kbuf, ubuf,
&target->thread.fpu,
0, NUM_FPU_REGS * sizeof(elf_fpreg_t));
}
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer,
* CONFIG_CPU_HAS_MSA variant. Only lower 64 bits of FP context's
* general register slots are copied to buffer slots. Only general
* registers are copied.
*/
static int fpr_get_msa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
void **kbuf, void __user **ubuf)
{
unsigned int i;
u64 fpr_val;
int err;
/* XXX fcr31 */
if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu,
0, sizeof(elf_fpregset_t));
BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
for (i = 0; i < NUM_FPU_REGS; i++) {
fpr_val = get_fpr64(&target->thread.fpu.fpr[i], 0);
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
err = user_regset_copyout(pos, count, kbuf, ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
if (err)
@ -447,27 +460,64 @@ static int fpr_get(struct task_struct *target,
return 0;
}
static int fpr_set(struct task_struct *target,
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer.
* Choose the appropriate helper for general registers, and then copy
* the FCSR register separately.
*/
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
void *kbuf, void __user *ubuf)
{
unsigned i;
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
int err;
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
err = fpr_get_fpa(target, &pos, &count, &kbuf, &ubuf);
else
err = fpr_get_msa(target, &pos, &count, &kbuf, &ubuf);
if (err)
return err;
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.fcr31,
fcr31_pos, fcr31_pos + sizeof(u32));
return err;
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context,
* !CONFIG_CPU_HAS_MSA variant. Buffer slots correspond 1:1 to FP
* context's general register slots. Only general registers are copied.
*/
static int fpr_set_fpa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
const void **kbuf, const void __user **ubuf)
{
return user_regset_copyin(pos, count, kbuf, ubuf,
&target->thread.fpu,
0, NUM_FPU_REGS * sizeof(elf_fpreg_t));
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context,
* CONFIG_CPU_HAS_MSA variant. Buffer slots are copied to lower 64
* bits only of FP context's general register slots. Only general
* registers are copied.
*/
static int fpr_set_msa(struct task_struct *target,
unsigned int *pos, unsigned int *count,
const void **kbuf, const void __user **ubuf)
{
unsigned int i;
u64 fpr_val;
/* XXX fcr31 */
init_fp_ctx(target);
if (sizeof(target->thread.fpu.fpr[i]) == sizeof(elf_fpreg_t))
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu,
0, sizeof(elf_fpregset_t));
int err;
BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
for (i = 0; i < NUM_FPU_REGS && *count > 0; i++) {
err = user_regset_copyin(pos, count, kbuf, ubuf,
&fpr_val, i * sizeof(elf_fpreg_t),
(i + 1) * sizeof(elf_fpreg_t));
if (err)
@ -478,6 +528,53 @@ static int fpr_set(struct task_struct *target,
return 0;
}
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context.
* Choose the appropriate helper for general registers, and then copy
* the FCSR register separately.
*
* We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
* which is supposed to have been guaranteed by the kernel before
* calling us, e.g. in `ptrace_regset'. We enforce that requirement,
* so that we can safely avoid preinitializing temporaries for
* partial register writes.
*/
static int fpr_set(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
u32 fcr31;
int err;
BUG_ON(count % sizeof(elf_fpreg_t));
if (pos + count > sizeof(elf_fpregset_t))
return -EIO;
init_fp_ctx(target);
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
err = fpr_set_fpa(target, &pos, &count, &kbuf, &ubuf);
else
err = fpr_set_msa(target, &pos, &count, &kbuf, &ubuf);
if (err)
return err;
if (count > 0) {
err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&fcr31,
fcr31_pos, fcr31_pos + sizeof(u32));
if (err)
return err;
ptrace_setfcr31(target, fcr31);
}
return err;
}
enum mips_regset {
REGSET_GPR,
REGSET_FPR,

4
arch/parisc/boot/compressed/misc.c
View File

@ -123,8 +123,8 @@ int puts(const char *s)
while ((nuline = strchr(s, '\n')) != NULL) {
if (nuline != s)
pdc_iodc_print(s, nuline - s);
pdc_iodc_print("\r\n", 2);
s = nuline + 1;
pdc_iodc_print("\r\n", 2);
s = nuline + 1;
}
if (*s != '\0')
pdc_iodc_print(s, strlen(s));

2
arch/parisc/include/asm/ldcw.h
View File

@ -12,6 +12,7 @@
for the semaphore. */
#define __PA_LDCW_ALIGNMENT 16
#define __PA_LDCW_ALIGN_ORDER 4
#define __ldcw_align(a) ({ \
unsigned long __ret = (unsigned long) &(a)->lock[0]; \
__ret = (__ret + __PA_LDCW_ALIGNMENT - 1) \
@ -29,6 +30,7 @@
ldcd). */
#define __PA_LDCW_ALIGNMENT 4
#define __PA_LDCW_ALIGN_ORDER 2
#define __ldcw_align(a) (&(a)->slock)
#define __LDCW "ldcw,co"

5
arch/parisc/include/asm/thread_info.h
View File

@ -35,7 +35,12 @@ struct thread_info {
/* thread information allocation */
#ifdef CONFIG_IRQSTACKS
#define THREAD_SIZE_ORDER 2 /* PA-RISC requires at least 16k stack */
#else
#define THREAD_SIZE_ORDER 3 /* PA-RISC requires at least 32k stack */
#endif
/* Be sure to hunt all references to this down when you change the size of
* the kernel stack */
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)

2
arch/parisc/kernel/drivers.c
View File

@ -870,7 +870,7 @@ static void print_parisc_device(struct parisc_device *dev)
static int count;
print_pa_hwpath(dev, hw_path);
printk(KERN_INFO "%d. %s at 0x%p [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type,
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);

25
arch/parisc/kernel/entry.S
View File

@ -35,6 +35,7 @@
#include <asm/pgtable.h>
#include <asm/signal.h>
#include <asm/unistd.h>
#include <asm/ldcw.h>
#include <asm/thread_info.h>
#include <linux/linkage.h>
@ -46,6 +47,14 @@
#endif
.import pa_tlb_lock,data
.macro load_pa_tlb_lock reg
#if __PA_LDCW_ALIGNMENT > 4
load32 PA(pa_tlb_lock) + __PA_LDCW_ALIGNMENT-1, \reg
depi 0,31,__PA_LDCW_ALIGN_ORDER, \reg
#else
load32 PA(pa_tlb_lock), \reg
#endif
.endm
/* space_to_prot macro creates a prot id from a space id */
@ -457,7 +466,7 @@
.macro tlb_lock spc,ptp,pte,tmp,tmp1,fault
#ifdef CONFIG_SMP
cmpib,COND(=),n 0,\spc,2f
load32 PA(pa_tlb_lock),\tmp
load_pa_tlb_lock \tmp
1: LDCW 0(\tmp),\tmp1
cmpib,COND(=) 0,\tmp1,1b
nop
@ -480,7 +489,7 @@
/* Release pa_tlb_lock lock. */
.macro tlb_unlock1 spc,tmp
#ifdef CONFIG_SMP
load32 PA(pa_tlb_lock),\tmp
load_pa_tlb_lock \tmp
tlb_unlock0 \spc,\tmp
#endif
.endm
@ -878,9 +887,6 @@ ENTRY_CFI(syscall_exit_rfi)
STREG %r19,PT_SR7(%r16)
intr_return:
/* NOTE: Need to enable interrupts incase we schedule. */
ssm PSW_SM_I, %r0
/* check for reschedule */
mfctl %cr30,%r1
LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_NEED_RESCHED */
@ -907,6 +913,11 @@ intr_check_sig:
LDREG PT_IASQ1(%r16), %r20
cmpib,COND(=),n 0,%r20,intr_restore /* backward */
/* NOTE: We need to enable interrupts if we have to deliver
* signals. We used to do this earlier but it caused kernel
* stack overflows. */
ssm PSW_SM_I, %r0
copy %r0, %r25 /* long in_syscall = 0 */
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
@ -958,6 +969,10 @@ intr_do_resched:
cmpib,COND(=) 0, %r20, intr_do_preempt
nop
/* NOTE: We need to enable interrupts if we schedule. We used
* to do this earlier but it caused kernel stack overflows. */
ssm PSW_SM_I, %r0
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif

1
arch/parisc/kernel/hpmc.S
View File

@ -305,6 +305,7 @@ ENDPROC_CFI(os_hpmc)
__INITRODATA
.align 4
.export os_hpmc_size
os_hpmc_size:
.word .os_hpmc_end-.os_hpmc

9
arch/parisc/kernel/pacache.S
View File

@ -36,6 +36,7 @@
#include <asm/assembly.h>
#include <asm/pgtable.h>
#include <asm/cache.h>
#include <asm/ldcw.h>
#include <linux/linkage.h>
.text
@ -333,8 +334,12 @@ ENDPROC_CFI(flush_data_cache_local)
.macro tlb_lock la,flags,tmp
#ifdef CONFIG_SMP
ldil L%pa_tlb_lock,%r1
ldo R%pa_tlb_lock(%r1),\la
#if __PA_LDCW_ALIGNMENT > 4
load32 pa_tlb_lock + __PA_LDCW_ALIGNMENT-1, \la
depi 0,31,__PA_LDCW_ALIGN_ORDER, \la
#else
load32 pa_tlb_lock, \la
#endif
rsm PSW_SM_I,\flags
1: LDCW 0(\la),\tmp
cmpib,<>,n 0,\tmp,3f

39
arch/parisc/kernel/process.c
View File

@ -39,6 +39,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
@ -183,6 +184,44 @@ int dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *r)
return 1;
}
/*
* Idle thread support
*
* Detect when running on QEMU with SeaBIOS PDC Firmware and let
* QEMU idle the host too.
*/
int running_on_qemu __read_mostly;
void __cpuidle arch_cpu_idle_dead(void)
{
/* nop on real hardware, qemu will offline CPU. */
asm volatile("or %%r31,%%r31,%%r31\n":::);
}
void __cpuidle arch_cpu_idle(void)
{
local_irq_enable();
/* nop on real hardware, qemu will idle sleep. */
asm volatile("or %%r10,%%r10,%%r10\n":::);
}
static int __init parisc_idle_init(void)
{
const char *marker;
/* check QEMU/SeaBIOS marker in PAGE0 */
marker = (char *) &PAGE0->pad0;
running_on_qemu = (memcmp(marker, "SeaBIOS", 8) == 0);
if (!running_on_qemu)
cpu_idle_poll_ctrl(1);
return 0;
}
arch_initcall(parisc_idle_init);
/*
* Copy architecture-specific thread state
*/

1
arch/parisc/kernel/unwind.c
View File

@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/kallsyms.h>
#include <linux/sort.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <asm/assembly.h>

2
arch/parisc/lib/delay.c
View File

@ -16,9 +16,7 @@
#include <linux/preempt.h>
#include <linux/init.h>
#include <asm/processor.h>
#include <asm/delay.h>
#include <asm/special_insns.h> /* for mfctl() */
#include <asm/processor.h> /* for boot_cpu_data */

10
arch/parisc/mm/init.c
View File

@ -631,11 +631,11 @@ void __init mem_init(void)
mem_init_print_info(NULL);
#ifdef CONFIG_DEBUG_KERNEL /* double-sanity-check paranoia */
printk("virtual kernel memory layout:\n"
" vmalloc : 0x%p - 0x%p (%4ld MB)\n"
" memory : 0x%p - 0x%p (%4ld MB)\n"
" .init : 0x%p - 0x%p (%4ld kB)\n"
" .data : 0x%p - 0x%p (%4ld kB)\n"
" .text : 0x%p - 0x%p (%4ld kB)\n",
" vmalloc : 0x%px - 0x%px (%4ld MB)\n"
" memory : 0x%px - 0x%px (%4ld MB)\n"
" .init : 0x%px - 0x%px (%4ld kB)\n"
" .data : 0x%px - 0x%px (%4ld kB)\n"
" .text : 0x%px - 0x%px (%4ld kB)\n",
(void*)VMALLOC_START, (void*)VMALLOC_END,
(VMALLOC_END - VMALLOC_START) >> 20,

6
arch/powerpc/include/asm/exception-64e.h
View File

@ -209,5 +209,11 @@ exc_##label##_book3e:
ori r3,r3,vector_offset@l; \
mtspr SPRN_IVOR##vector_number,r3;
#define RFI_TO_KERNEL \
rfi
#define RFI_TO_USER \
rfi
#endif /* _ASM_POWERPC_EXCEPTION_64E_H */

57
arch/powerpc/include/asm/exception-64s.h
View File

@ -74,6 +74,59 @@
*/
#define EX_R3 EX_DAR
/*
* Macros for annotating the expected destination of (h)rfid
*
* The nop instructions allow us to insert one or more instructions to flush the
* L1-D cache when returning to userspace or a guest.
*/
#define RFI_FLUSH_SLOT \
RFI_FLUSH_FIXUP_SECTION; \
nop; \
nop; \
nop
#define RFI_TO_KERNEL \
rfid
#define RFI_TO_USER \
RFI_FLUSH_SLOT; \
rfid; \
b rfi_flush_fallback
#define RFI_TO_USER_OR_KERNEL \
RFI_FLUSH_SLOT; \
rfid; \
b rfi_flush_fallback
#define RFI_TO_GUEST \
RFI_FLUSH_SLOT; \
rfid; \
b rfi_flush_fallback
#define HRFI_TO_KERNEL \
hrfid
#define HRFI_TO_USER \
RFI_FLUSH_SLOT; \
hrfid; \
b hrfi_flush_fallback
#define HRFI_TO_USER_OR_KERNEL \
RFI_FLUSH_SLOT; \
hrfid; \
b hrfi_flush_fallback
#define HRFI_TO_GUEST \
RFI_FLUSH_SLOT; \
hrfid; \
b hrfi_flush_fallback
#define HRFI_TO_UNKNOWN \
RFI_FLUSH_SLOT; \
hrfid; \
b hrfi_flush_fallback
#ifdef CONFIG_RELOCATABLE
#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
@ -218,7 +271,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
mtspr SPRN_##h##SRR0,r12; \
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
mtspr SPRN_##h##SRR1,r10; \
h##rfid; \
h##RFI_TO_KERNEL; \
b . /* prevent speculative execution */
#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
__EXCEPTION_PROLOG_PSERIES_1(label, h)
@ -232,7 +285,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
mtspr SPRN_##h##SRR0,r12; \
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
mtspr SPRN_##h##SRR1,r10; \
h##rfid; \
h##RFI_TO_KERNEL; \
b . /* prevent speculative execution */
#define EXCEPTION_PROLOG_PSERIES_1_NORI(label, h) \

13
arch/powerpc/include/asm/feature-fixups.h
View File

@ -187,7 +187,20 @@ label##3: \
FTR_ENTRY_OFFSET label##1b-label##3b; \
.popsection;
#define RFI_FLUSH_FIXUP_SECTION \
951: \
.pushsection __rfi_flush_fixup,"a"; \
.align 2; \
952: \
FTR_ENTRY_OFFSET 951b-952b; \
.popsection;
#ifndef __ASSEMBLY__
#include <linux/types.h>
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
void apply_feature_fixups(void);
void setup_feature_keys(void);
#endif

17
arch/powerpc/include/asm/hvcall.h
View File

@ -241,6 +241,7 @@
#define H_GET_HCA_INFO 0x1B8
#define H_GET_PERF_COUNT 0x1BC
#define H_MANAGE_TRACE 0x1C0
#define H_GET_CPU_CHARACTERISTICS 0x1C8
#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
#define H_QUERY_INT_STATE 0x1E4
#define H_POLL_PENDING 0x1D8
@ -330,6 +331,17 @@
#define H_SIGNAL_SYS_RESET_ALL_OTHERS -2
/* >= 0 values are CPU number */
/* H_GET_CPU_CHARACTERISTICS return values */
#define H_CPU_CHAR_SPEC_BAR_ORI31 (1ull << 63) // IBM bit 0
#define H_CPU_CHAR_BCCTRL_SERIALISED (1ull << 62) // IBM bit 1
#define H_CPU_CHAR_L1D_FLUSH_ORI30 (1ull << 61) // IBM bit 2
#define H_CPU_CHAR_L1D_FLUSH_TRIG2 (1ull << 60) // IBM bit 3
#define H_CPU_CHAR_L1D_THREAD_PRIV (1ull << 59) // IBM bit 4
#define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0
#define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1
#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2
/* Flag values used in H_REGISTER_PROC_TBL hcall */
#define PROC_TABLE_OP_MASK 0x18
#define PROC_TABLE_DEREG 0x10
@ -436,6 +448,11 @@ static inline unsigned int get_longbusy_msecs(int longbusy_rc)
}
}
struct h_cpu_char_result {
u64 character;
u64 behaviour;
};
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */

5
arch/powerpc/include/asm/mmu_context.h
View File

@ -160,9 +160,10 @@ static inline void enter_lazy_tlb(struct mm_struct *mm,
#endif
}
static inline void arch_dup_mmap(struct mm_struct *oldmm,
struct mm_struct *mm)
static inline int arch_dup_mmap(struct mm_struct *oldmm,
struct mm_struct *mm)
{
return 0;
}
#ifndef CONFIG_PPC_BOOK3S_64

10
arch/powerpc/include/asm/paca.h
View File

@ -232,6 +232,16 @@ struct paca_struct {
struct sibling_subcore_state *sibling_subcore_state;
#endif
#endif
#ifdef CONFIG_PPC_BOOK3S_64
/*
* rfi fallback flush must be in its own cacheline to prevent
* other paca data leaking into the L1d
*/
u64 exrfi[EX_SIZE] __aligned(0x80);
void *rfi_flush_fallback_area;
u64 l1d_flush_congruence;
u64 l1d_flush_sets;
#endif
};
extern void copy_mm_to_paca(struct mm_struct *mm);

14
arch/powerpc/include/asm/plpar_wrappers.h
View File

@ -326,4 +326,18 @@ static inline long plapr_signal_sys_reset(long cpu)
return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu);
}
static inline long plpar_get_cpu_characteristics(struct h_cpu_char_result *p)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
long rc;
rc = plpar_hcall(H_GET_CPU_CHARACTERISTICS, retbuf);
if (rc == H_SUCCESS) {
p->character = retbuf[0];
p->behaviour = retbuf[1];
}
return rc;
}
#endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */

13
arch/powerpc/include/asm/setup.h
View File

@ -39,6 +39,19 @@ static inline void pseries_big_endian_exceptions(void) {}
static inline void pseries_little_endian_exceptions(void) {}
#endif /* CONFIG_PPC_PSERIES */
void rfi_flush_enable(bool enable);
/* These are bit flags */
enum l1d_flush_type {
L1D_FLUSH_NONE = 0x1,
L1D_FLUSH_FALLBACK = 0x2,
L1D_FLUSH_ORI = 0x4,
L1D_FLUSH_MTTRIG = 0x8,
};
void __init setup_rfi_flush(enum l1d_flush_type, bool enable);
void do_rfi_flush_fixups(enum l1d_flush_type types);
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_SETUP_H */

5
arch/powerpc/kernel/asm-offsets.c
View File

@ -237,6 +237,11 @@ int main(void)
OFFSET(PACA_NMI_EMERG_SP, paca_struct, nmi_emergency_sp);
OFFSET(PACA_IN_MCE, paca_struct, in_mce);
OFFSET(PACA_IN_NMI, paca_struct, in_nmi);
OFFSET(PACA_RFI_FLUSH_FALLBACK_AREA, paca_struct, rfi_flush_fallback_area);
OFFSET(PACA_EXRFI, paca_struct, exrfi);
OFFSET(PACA_L1D_FLUSH_CONGRUENCE, paca_struct, l1d_flush_congruence);
OFFSET(PACA_L1D_FLUSH_SETS, paca_struct, l1d_flush_sets);
#endif
OFFSET(PACAHWCPUID, paca_struct, hw_cpu_id);
OFFSET(PACAKEXECSTATE, paca_struct, kexec_state);

44
arch/powerpc/kernel/entry_64.S
View File

@ -37,6 +37,11 @@
#include <asm/tm.h>
#include <asm/ppc-opcode.h>
#include <asm/export.h>
#ifdef CONFIG_PPC_BOOK3S
#include <asm/exception-64s.h>
#else
#include <asm/exception-64e.h>
#endif
/*
* System calls.
@ -262,13 +267,23 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r13,GPR13(r1) /* only restore r13 if returning to usermode */
ld r2,GPR2(r1)
ld r1,GPR1(r1)
mtlr r4
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
RFI_TO_USER
b . /* prevent speculative execution */
/* exit to kernel */
1: ld r2,GPR2(r1)
ld r1,GPR1(r1)
mtlr r4
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
RFI
RFI_TO_KERNEL
b . /* prevent speculative execution */
.Lsyscall_error:
@ -397,8 +412,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
mtmsrd r10, 1
mtspr SPRN_SRR0, r11
mtspr SPRN_SRR1, r12
rfid
RFI_TO_USER
b . /* prevent speculative execution */
#endif
_ASM_NOKPROBE_SYMBOL(system_call_common);
@ -878,7 +892,7 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
REST_GPR(13, r1)
1:
mtspr SPRN_SRR1,r3
ld r2,_CCR(r1)
@ -891,8 +905,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r1,GPR1(r1)
RFI_TO_USER
b . /* prevent speculative execution */
rfid
1: mtspr SPRN_SRR1,r3
ld r2,_CCR(r1)
mtcrf 0xFF,r2
ld r2,_NIP(r1)
mtspr SPRN_SRR0,r2
ld r0,GPR0(r1)
ld r2,GPR2(r1)
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r1,GPR1(r1)
RFI_TO_KERNEL
b . /* prevent speculative execution */
#endif /* CONFIG_PPC_BOOK3E */
@ -1073,7 +1101,7 @@ __enter_rtas:
mtspr SPRN_SRR0,r5
mtspr SPRN_SRR1,r6
rfid
RFI_TO_KERNEL
b . /* prevent speculative execution */
rtas_return_loc:
@ -1098,7 +1126,7 @@ rtas_return_loc:
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
rfid
RFI_TO_KERNEL
b . /* prevent speculative execution */
_ASM_NOKPROBE_SYMBOL(__enter_rtas)
_ASM_NOKPROBE_SYMBOL(rtas_return_loc)
@ -1171,7 +1199,7 @@ _GLOBAL(enter_prom)
LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
andc r11,r11,r12
mtsrr1 r11
rfid
RFI_TO_KERNEL
#endif /* CONFIG_PPC_BOOK3E */
1: /* Return from OF */

137
arch/powerpc/kernel/exceptions-64s.S
View File

@ -256,7 +256,7 @@ BEGIN_FTR_SECTION
LOAD_HANDLER(r12, machine_check_handle_early)
1: mtspr SPRN_SRR0,r12
mtspr SPRN_SRR1,r11
rfid
RFI_TO_KERNEL
b . /* prevent speculative execution */
2:
/* Stack overflow. Stay on emergency stack and panic.
@ -445,7 +445,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
li r3,MSR_ME
andc r10,r10,r3 /* Turn off MSR_ME */
mtspr SPRN_SRR1,r10
rfid
RFI_TO_KERNEL
b .
2:
/*
@ -463,7 +463,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
*/
bl machine_check_queue_event
MACHINE_CHECK_HANDLER_WINDUP
rfid
RFI_TO_USER_OR_KERNEL
9:
/* Deliver the machine check to host kernel in V mode. */
MACHINE_CHECK_HANDLER_WINDUP
@ -598,6 +598,9 @@ EXC_COMMON_BEGIN(slb_miss_common)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
andi. r9,r11,MSR_PR // Check for exception from userspace
cmpdi cr4,r9,MSR_PR // And save the result in CR4 for later
/*
* Test MSR_RI before calling slb_allocate_realmode, because the
* MSR in r11 gets clobbered. However we still want to allocate
@ -624,9 +627,12 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
/* All done -- return from exception. */
bne cr4,1f /* returning to kernel */
.machine push
.machine "power4"
mtcrf 0x80,r9
mtcrf 0x08,r9 /* MSR[PR] indication is in cr4 */
mtcrf 0x04,r9 /* MSR[RI] indication is in cr5 */
mtcrf 0x02,r9 /* I/D indication is in cr6 */
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
@ -640,8 +646,29 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
rfid
RFI_TO_USER
b . /* prevent speculative execution */
1:
.machine push
.machine "power4"
mtcrf 0x80,r9
mtcrf 0x08,r9 /* MSR[PR] indication is in cr4 */
mtcrf 0x04,r9 /* MSR[RI] indication is in cr5 */
mtcrf 0x02,r9 /* I/D indication is in cr6 */
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
.machine pop
RESTORE_CTR(r9, PACA_EXSLB)
RESTORE_PPR_PACA(PACA_EXSLB, r9)
mr r3,r12
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
RFI_TO_KERNEL
b . /* prevent speculative execution */
2: std r3,PACA_EXSLB+EX_DAR(r13)
mr r3,r12
@ -651,7 +678,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
mtspr SPRN_SRR0,r10
ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
RFI_TO_KERNEL
b .
8: std r3,PACA_EXSLB+EX_DAR(r13)
@ -662,7 +689,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
mtspr SPRN_SRR0,r10
ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
RFI_TO_KERNEL
b .
EXC_COMMON_BEGIN(unrecov_slb)
@ -901,7 +928,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
mtspr SPRN_SRR0,r10 ; \
ld r10,PACAKMSR(r13) ; \
mtspr SPRN_SRR1,r10 ; \
rfid ; \
RFI_TO_KERNEL ; \
b . ; /* prevent speculative execution */
#ifdef CONFIG_PPC_FAST_ENDIAN_SWITCH
@ -917,7 +944,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
xori r12,r12,MSR_LE ; \
mtspr SPRN_SRR1,r12 ; \
mr r13,r9 ; \
rfid ; /* return to userspace */ \
RFI_TO_USER ; /* return to userspace */ \
b . ; /* prevent speculative execution */
#else
#define SYSCALL_FASTENDIAN_TEST
@ -1063,7 +1090,7 @@ TRAMP_REAL_BEGIN(hmi_exception_early)
mtcr r11
REST_GPR(11, r1)
ld r1,GPR1(r1)
hrfid
HRFI_TO_USER_OR_KERNEL
1: mtcr r11
REST_GPR(11, r1)
@ -1314,7 +1341,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
ld r11,PACA_EXGEN+EX_R11(r13)
ld r12,PACA_EXGEN+EX_R12(r13)
ld r13,PACA_EXGEN+EX_R13(r13)
HRFID
HRFI_TO_UNKNOWN
b .
#endif
@ -1418,10 +1445,94 @@ masked_##_H##interrupt: \
ld r10,PACA_EXGEN+EX_R10(r13); \
ld r11,PACA_EXGEN+EX_R11(r13); \
/* returns to kernel where r13 must be set up, so don't restore it */ \
##_H##rfid; \
##_H##RFI_TO_KERNEL; \
b .; \
MASKED_DEC_HANDLER(_H)
TRAMP_REAL_BEGIN(rfi_flush_fallback)
SET_SCRATCH0(r13);
GET_PACA(r13);
std r9,PACA_EXRFI+EX_R9(r13)
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
std r12,PACA_EXRFI+EX_R12(r13)
std r8,PACA_EXRFI+EX_R13(r13)
mfctr r9
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SETS(r13)
ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
/*
* The load adresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
addi r12,r12,8
mtctr r11
DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
/* order ld/st prior to dcbt stop all streams with flushing */
sync
1: li r8,0
.rept 8 /* 8-way set associative */
ldx r11,r10,r8
add r8,r8,r12
xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not
add r8,r8,r11 // Add 0, this creates a dependency on the ldx
.endr
addi r10,r10,128 /* 128 byte cache line */
bdnz 1b
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
ld r11,PACA_EXRFI+EX_R11(r13)
ld r12,PACA_EXRFI+EX_R12(r13)
ld r8,PACA_EXRFI+EX_R13(r13)
GET_SCRATCH0(r13);
rfid
TRAMP_REAL_BEGIN(hrfi_flush_fallback)
SET_SCRATCH0(r13);
GET_PACA(r13);
std r9,PACA_EXRFI+EX_R9(r13)
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
std r12,PACA_EXRFI+EX_R12(r13)
std r8,PACA_EXRFI+EX_R13(r13)
mfctr r9
ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
ld r11,PACA_L1D_FLUSH_SETS(r13)
ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13)
/*
* The load adresses are at staggered offsets within cachelines,
* which suits some pipelines better (on others it should not
* hurt).
*/
addi r12,r12,8
mtctr r11
DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
/* order ld/st prior to dcbt stop all streams with flushing */
sync
1: li r8,0
.rept 8 /* 8-way set associative */
ldx r11,r10,r8
add r8,r8,r12
xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not
add r8,r8,r11 // Add 0, this creates a dependency on the ldx
.endr
addi r10,r10,128 /* 128 byte cache line */
bdnz 1b
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
ld r11,PACA_EXRFI+EX_R11(r13)
ld r12,PACA_EXRFI+EX_R12(r13)
ld r8,PACA_EXRFI+EX_R13(r13)
GET_SCRATCH0(r13);
hrfid
/*
* Real mode exceptions actually use this too, but alternate
* instruction code patches (which end up in the common .text area)
@ -1441,7 +1552,7 @@ TRAMP_REAL_BEGIN(kvmppc_skip_interrupt)
addi r13, r13, 4
mtspr SPRN_SRR0, r13
GET_SCRATCH0(r13)
rfid
RFI_TO_KERNEL
b .
TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt)
@ -1453,7 +1564,7 @@ TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt)
addi r13, r13, 4
mtspr SPRN_HSRR0, r13
GET_SCRATCH0(r13)
hrfid
HRFI_TO_KERNEL
b .
#endif

2
arch/powerpc/kernel/process.c
View File

@ -1403,7 +1403,7 @@ void show_regs(struct pt_regs * regs)
printk("NIP: "REG" LR: "REG" CTR: "REG"\n",
regs->nip, regs->link, regs->ctr);
printk("REGS: %p TRAP: %04lx %s (%s)\n",
printk("REGS: %px TRAP: %04lx %s (%s)\n",
regs, regs->trap, print_tainted(), init_utsname()->release);
printk("MSR: "REG" ", regs->msr);
print_msr_bits(regs->msr);

101
arch/powerpc/kernel/setup_64.c
View File

@ -801,3 +801,104 @@ static int __init disable_hardlockup_detector(void)
return 0;
}
early_initcall(disable_hardlockup_detector);
#ifdef CONFIG_PPC_BOOK3S_64
static enum l1d_flush_type enabled_flush_types;
static void *l1d_flush_fallback_area;
static bool no_rfi_flush;
bool rfi_flush;
static int __init handle_no_rfi_flush(char *p)
{
pr_info("rfi-flush: disabled on command line.");
no_rfi_flush = true;
return 0;
}
early_param("no_rfi_flush", handle_no_rfi_flush);
/*
* The RFI flush is not KPTI, but because users will see doco that says to use
* nopti we hijack that option here to also disable the RFI flush.
*/
static int __init handle_no_pti(char *p)
{
pr_info("rfi-flush: disabling due to 'nopti' on command line.\n");
handle_no_rfi_flush(NULL);
return 0;
}
early_param("nopti", handle_no_pti);
static void do_nothing(void *unused)
{
/*
* We don't need to do the flush explicitly, just enter+exit kernel is
* sufficient, the RFI exit handlers will do the right thing.
*/
}
void rfi_flush_enable(bool enable)
{
if (rfi_flush == enable)
return;
if (enable) {
do_rfi_flush_fixups(enabled_flush_types);
on_each_cpu(do_nothing, NULL, 1);
} else
do_rfi_flush_fixups(L1D_FLUSH_NONE);
rfi_flush = enable;
}
static void init_fallback_flush(void)
{
u64 l1d_size, limit;
int cpu;
l1d_size = ppc64_caches.l1d.size;
limit = min(safe_stack_limit(), ppc64_rma_size);
/*
* Align to L1d size, and size it at 2x L1d size, to catch possible
* hardware prefetch runoff. We don't have a recipe for load patterns to
* reliably avoid the prefetcher.
*/
l1d_flush_fallback_area = __va(memblock_alloc_base(l1d_size * 2, l1d_size, limit));
memset(l1d_flush_fallback_area, 0, l1d_size * 2);
for_each_possible_cpu(cpu) {
/*
* The fallback flush is currently coded for 8-way
* associativity. Different associativity is possible, but it
* will be treated as 8-way and may not evict the lines as
* effectively.
*
* 128 byte lines are mandatory.
*/
u64 c = l1d_size / 8;
paca[cpu].rfi_flush_fallback_area = l1d_flush_fallback_area;
paca[cpu].l1d_flush_congruence = c;
paca[cpu].l1d_flush_sets = c / 128;
}
}
void __init setup_rfi_flush(enum l1d_flush_type types, bool enable)
{
if (types & L1D_FLUSH_FALLBACK) {
pr_info("rfi-flush: Using fallback displacement flush\n");
init_fallback_flush();
}
if (types & L1D_FLUSH_ORI)
pr_info("rfi-flush: Using ori type flush\n");
if (types & L1D_FLUSH_MTTRIG)
pr_info("rfi-flush: Using mttrig type flush\n");
enabled_flush_types = types;
if (!no_rfi_flush)
rfi_flush_enable(enable);
}
#endif /* CONFIG_PPC_BOOK3S_64 */

9
arch/powerpc/kernel/vmlinux.lds.S
View File

@ -132,6 +132,15 @@ SECTIONS
/* Read-only data */
RO_DATA(PAGE_SIZE)
#ifdef CONFIG_PPC64
. = ALIGN(8);
__rfi_flush_fixup : AT(ADDR(__rfi_flush_fixup) - LOAD_OFFSET) {
__start___rfi_flush_fixup = .;
*(__rfi_flush_fixup)
__stop___rfi_flush_fixup = .;
}
#endif
EXCEPTION_TABLE(0)
NOTES :kernel :notes

1
arch/powerpc/kvm/book3s_64_mmu.c
View File

@ -235,6 +235,7 @@ static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
gpte->may_read = true;
gpte->may_write = true;
gpte->page_size = MMU_PAGE_4K;
gpte->wimg = HPTE_R_M;
return 0;
}

92
arch/powerpc/kvm/book3s_64_mmu_hv.c
View File

@ -65,11 +65,17 @@ struct kvm_resize_hpt {
u32 order;
/* These fields protected by kvm->lock */
int error;
bool prepare_done;
/* Private to the work thread, until prepare_done is true,
* then protected by kvm->resize_hpt_sem */
/* Possible values and their usage:
* <0 an error occurred during allocation,
* -EBUSY allocation is in the progress,
* 0 allocation made successfuly.
*/
int error;
/* Private to the work thread, until error != -EBUSY,
* then protected by kvm->lock.
*/
struct kvm_hpt_info hpt;
};
@ -159,8 +165,6 @@ long kvmppc_alloc_reset_hpt(struct kvm *kvm, int order)
* Reset all the reverse-mapping chains for all memslots
*/
kvmppc_rmap_reset(kvm);
/* Ensure that each vcpu will flush its TLB on next entry. */
cpumask_setall(&kvm->arch.need_tlb_flush);
err = 0;
goto out;
}
@ -176,6 +180,10 @@ long kvmppc_alloc_reset_hpt(struct kvm *kvm, int order)
kvmppc_set_hpt(kvm, &info);
out:
if (err == 0)
/* Ensure that each vcpu will flush its TLB on next entry. */
cpumask_setall(&kvm->arch.need_tlb_flush);
mutex_unlock(&kvm->lock);
return err;
}
@ -1413,16 +1421,20 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
static void resize_hpt_release(struct kvm *kvm, struct kvm_resize_hpt *resize)
{
BUG_ON(kvm->arch.resize_hpt != resize);
if (WARN_ON(!mutex_is_locked(&kvm->lock)))
return;
if (!resize)
return;
if (resize->hpt.virt)
kvmppc_free_hpt(&resize->hpt);
if (resize->error != -EBUSY) {
if (resize->hpt.virt)
kvmppc_free_hpt(&resize->hpt);
kfree(resize);
}
kvm->arch.resize_hpt = NULL;
kfree(resize);
if (kvm->arch.resize_hpt == resize)
kvm->arch.resize_hpt = NULL;
}
static void resize_hpt_prepare_work(struct work_struct *work)
@ -1431,17 +1443,41 @@ static void resize_hpt_prepare_work(struct work_struct *work)
struct kvm_resize_hpt,
work);
struct kvm *kvm = resize->kvm;
int err;
int err = 0;
resize_hpt_debug(resize, "resize_hpt_prepare_work(): order = %d\n",
resize->order);
err = resize_hpt_allocate(resize);
if (WARN_ON(resize->error != -EBUSY))
return;
mutex_lock(&kvm->lock);
/* Request is still current? */
if (kvm->arch.resize_hpt == resize) {
/* We may request large allocations here:
* do not sleep with kvm->lock held for a while.
*/
mutex_unlock(&kvm->lock);
resize_hpt_debug(resize, "resize_hpt_prepare_work(): order = %d\n",
resize->order);
err = resize_hpt_allocate(resize);
/* We have strict assumption about -EBUSY
* when preparing for HPT resize.
*/
if (WARN_ON(err == -EBUSY))
err = -EINPROGRESS;
mutex_lock(&kvm->lock);
/* It is possible that kvm->arch.resize_hpt != resize
* after we grab kvm->lock again.
*/
}
resize->error = err;
resize->prepare_done = true;
if (kvm->arch.resize_hpt != resize)
resize_hpt_release(kvm, resize);
mutex_unlock(&kvm->lock);
}
@ -1466,14 +1502,12 @@ long kvm_vm_ioctl_resize_hpt_prepare(struct kvm *kvm,
if (resize) {
if (resize->order == shift) {
/* Suitable resize in progress */
if (resize->prepare_done) {
ret = resize->error;
if (ret != 0)
resize_hpt_release(kvm, resize);
} else {
/* Suitable resize in progress? */
ret = resize->error;
if (ret == -EBUSY)
ret = 100; /* estimated time in ms */
}
else if (ret)
resize_hpt_release(kvm, resize);
goto out;
}
@ -1493,6 +1527,8 @@ long kvm_vm_ioctl_resize_hpt_prepare(struct kvm *kvm,
ret = -ENOMEM;
goto out;
}
resize->error = -EBUSY;
resize->order = shift;
resize->kvm = kvm;
INIT_WORK(&resize->work, resize_hpt_prepare_work);
@ -1547,16 +1583,12 @@ long kvm_vm_ioctl_resize_hpt_commit(struct kvm *kvm,
if (!resize || (resize->order != shift))
goto out;
ret = -EBUSY;
if (!resize->prepare_done)
goto out;
ret = resize->error;
if (ret != 0)
if (ret)
goto out;
ret = resize_hpt_rehash(resize);
if (ret != 0)
if (ret)
goto out;
resize_hpt_pivot(resize);

9
arch/powerpc/kvm/book3s_hv_rmhandlers.S
View File

@ -79,7 +79,7 @@ _GLOBAL_TOC(kvmppc_hv_entry_trampoline)
mtmsrd r0,1 /* clear RI in MSR */
mtsrr0 r5
mtsrr1 r6
RFI
RFI_TO_KERNEL
kvmppc_call_hv_entry:
BEGIN_FTR_SECTION
@ -199,7 +199,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mtmsrd r6, 1 /* Clear RI in MSR */
mtsrr0 r8
mtsrr1 r7
RFI
RFI_TO_KERNEL
/* Virtual-mode return */
.Lvirt_return:
@ -1167,8 +1167,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
ld r0, VCPU_GPR(R0)(r4)
ld r4, VCPU_GPR(R4)(r4)
hrfid
HRFI_TO_GUEST
b .
secondary_too_late:
@ -3320,7 +3319,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
ld r4, PACAKMSR(r13)
mtspr SPRN_SRR0, r3
mtspr SPRN_SRR1, r4
rfid
RFI_TO_KERNEL
9: addi r3, r1, STACK_FRAME_OVERHEAD
bl kvmppc_bad_interrupt
b 9b

2
arch/powerpc/kvm/book3s_pr.c
View File

@ -60,6 +60,7 @@ static void kvmppc_giveup_fac(struct kvm_vcpu *vcpu, ulong fac);
#define MSR_USER32 MSR_USER
#define MSR_USER64 MSR_USER
#define HW_PAGE_SIZE PAGE_SIZE
#define HPTE_R_M _PAGE_COHERENT
#endif
static bool kvmppc_is_split_real(struct kvm_vcpu *vcpu)
@ -557,6 +558,7 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
pte.eaddr = eaddr;
pte.vpage = eaddr >> 12;
pte.page_size = MMU_PAGE_64K;
pte.wimg = HPTE_R_M;
}
switch (kvmppc_get_msr(vcpu) & (MSR_DR|MSR_IR)) {

7
arch/powerpc/kvm/book3s_rmhandlers.S
View File

@ -46,6 +46,9 @@
#define FUNC(name) name
#define RFI_TO_KERNEL RFI
#define RFI_TO_GUEST RFI
.macro INTERRUPT_TRAMPOLINE intno
.global kvmppc_trampoline_\intno
@ -141,7 +144,7 @@ kvmppc_handler_skip_ins:
GET_SCRATCH0(r13)
/* And get back into the code */
RFI
RFI_TO_KERNEL
#endif
/*
@ -164,6 +167,6 @@ _GLOBAL_TOC(kvmppc_entry_trampoline)
ori r5, r5, MSR_EE
mtsrr0 r7
mtsrr1 r6
RFI
RFI_TO_KERNEL
#include "book3s_segment.S"

4
arch/powerpc/kvm/book3s_segment.S
View File

@ -156,7 +156,7 @@ no_dcbz32_on:
PPC_LL r9, SVCPU_R9(r3)
PPC_LL r3, (SVCPU_R3)(r3)
RFI
RFI_TO_GUEST
kvmppc_handler_trampoline_enter_end:
@ -407,5 +407,5 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
cmpwi r12, BOOK3S_INTERRUPT_DOORBELL
beqa BOOK3S_INTERRUPT_DOORBELL
RFI
RFI_TO_KERNEL
kvmppc_handler_trampoline_exit_end:

7
arch/powerpc/kvm/book3s_xive.c
View File

@ -725,7 +725,8 @@ u64 kvmppc_xive_get_icp(struct kvm_vcpu *vcpu)
/* Return the per-cpu state for state saving/migration */
return (u64)xc->cppr << KVM_REG_PPC_ICP_CPPR_SHIFT |
(u64)xc->mfrr << KVM_REG_PPC_ICP_MFRR_SHIFT;
(u64)xc->mfrr << KVM_REG_PPC_ICP_MFRR_SHIFT |
(u64)0xff << KVM_REG_PPC_ICP_PPRI_SHIFT;
}
int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval)
@ -1558,7 +1559,7 @@ static int xive_set_source(struct kvmppc_xive *xive, long irq, u64 addr)
/*
* Restore P and Q. If the interrupt was pending, we
* force both P and Q, which will trigger a resend.
* force Q and !P, which will trigger a resend.
*
* That means that a guest that had both an interrupt
* pending (queued) and Q set will restore with only
@ -1566,7 +1567,7 @@ static int xive_set_source(struct kvmppc_xive *xive, long irq, u64 addr)
* is perfectly fine as coalescing interrupts that haven't
* been presented yet is always allowed.
*/
if (val & KVM_XICS_PRESENTED || val & KVM_XICS_PENDING)
if (val & KVM_XICS_PRESENTED && !(val & KVM_XICS_PENDING))
state->old_p = true;
if (val & KVM_XICS_QUEUED || val & KVM_XICS_PENDING)
state->old_q = true;

41
arch/powerpc/lib/feature-fixups.c
View File

@ -116,6 +116,47 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
}
}
#ifdef CONFIG_PPC_BOOK3S_64
void do_rfi_flush_fixups(enum l1d_flush_type types)
{
unsigned int instrs[3], *dest;
long *start, *end;
int i;
start = PTRRELOC(&__start___rfi_flush_fixup),
end = PTRRELOC(&__stop___rfi_flush_fixup);
instrs[0] = 0x60000000; /* nop */
instrs[1] = 0x60000000; /* nop */
instrs[2] = 0x60000000; /* nop */
if (types & L1D_FLUSH_FALLBACK)
/* b .+16 to fallback flush */
instrs[0] = 0x48000010;
i = 0;
if (types & L1D_FLUSH_ORI) {
instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
}
if (types & L1D_FLUSH_MTTRIG)
instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
for (i = 0; start < end; start++, i++) {
dest = (void *)start + *start;
pr_devel("patching dest %lx\n", (unsigned long)dest);
patch_instruction(dest, instrs[0]);
patch_instruction(dest + 1, instrs[1]);
patch_instruction(dest + 2, instrs[2]);
}
printk(KERN_DEBUG "rfi-flush: patched %d locations\n", i);
}
#endif /* CONFIG_PPC_BOOK3S_64 */
void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
{
long *start, *end;

7
arch/powerpc/mm/fault.c
View File

@ -145,6 +145,11 @@ static noinline int bad_area(struct pt_regs *regs, unsigned long address)
return __bad_area(regs, address, SEGV_MAPERR);
}
static noinline int bad_access(struct pt_regs *regs, unsigned long address)
{
return __bad_area(regs, address, SEGV_ACCERR);
}
static int do_sigbus(struct pt_regs *regs, unsigned long address,
unsigned int fault)
{
@ -490,7 +495,7 @@ retry:
good_area:
if (unlikely(access_error(is_write, is_exec, vma)))
return bad_area(regs, address);
return bad_access(regs, address);
/*
* If for any reason at all we couldn't handle the fault,

6
arch/powerpc/net/bpf_jit_comp64.c
View File

@ -763,7 +763,8 @@ emit_clear:
func = (u8 *) __bpf_call_base + imm;
/* Save skb pointer if we need to re-cache skb data */
if (bpf_helper_changes_pkt_data(func))
if ((ctx->seen & SEEN_SKB) &&
bpf_helper_changes_pkt_data(func))
PPC_BPF_STL(3, 1, bpf_jit_stack_local(ctx));
bpf_jit_emit_func_call(image, ctx, (u64)func);
@ -772,7 +773,8 @@ emit_clear:
PPC_MR(b2p[BPF_REG_0], 3);
/* refresh skb cache */
if (bpf_helper_changes_pkt_data(func)) {
if ((ctx->seen & SEEN_SKB) &&
bpf_helper_changes_pkt_data(func)) {
/* reload skb pointer to r3 */
PPC_BPF_LL(3, 1, bpf_jit_stack_local(ctx));
bpf_jit_emit_skb_loads(image, ctx);

8
arch/powerpc/perf/core-book3s.c
View File

@ -410,8 +410,12 @@ static __u64 power_pmu_bhrb_to(u64 addr)
int ret;
__u64 target;
if (is_kernel_addr(addr))
return branch_target((unsigned int *)addr);
if (is_kernel_addr(addr)) {
if (probe_kernel_read(&instr, (void *)addr, sizeof(instr)))
return 0;
return branch_target(&instr);
}
/* Userspace: need copy instruction here then translate it */
pagefault_disable();

17
arch/powerpc/perf/imc-pmu.c
View File

@ -309,6 +309,19 @@ static int ppc_nest_imc_cpu_offline(unsigned int cpu)
if (!cpumask_test_and_clear_cpu(cpu, &nest_imc_cpumask))
return 0;
/*
* Check whether nest_imc is registered. We could end up here if the
* cpuhotplug callback registration fails. i.e, callback invokes the
* offline path for all successfully registered nodes. At this stage,
* nest_imc pmu will not be registered and we should return here.
*
* We return with a zero since this is not an offline failure. And
* cpuhp_setup_state() returns the actual failure reason to the caller,
* which in turn will call the cleanup routine.
*/
if (!nest_pmus)
return 0;
/*
* Now that this cpu is one of the designated,
* find a next cpu a) which is online and b) in same chip.
@ -1171,6 +1184,7 @@ static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)
if (nest_pmus == 1) {
cpuhp_remove_state(CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE);
kfree(nest_imc_refc);
kfree(per_nest_pmu_arr);
}
if (nest_pmus > 0)
@ -1195,7 +1209,6 @@ static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)
kfree(pmu_ptr->attr_groups[IMC_EVENT_ATTR]->attrs);
kfree(pmu_ptr->attr_groups[IMC_EVENT_ATTR]);
kfree(pmu_ptr);
kfree(per_nest_pmu_arr);
return;
}
@ -1309,6 +1322,8 @@ int init_imc_pmu(struct device_node *parent, struct imc_pmu *pmu_ptr, int pmu_id
ret = nest_pmu_cpumask_init();
if (ret) {
mutex_unlock(&nest_init_lock);
kfree(nest_imc_refc);
kfree(per_nest_pmu_arr);
goto err_free;
}
}

Some files were not shown because too many files have changed in this diff Show More