staging: sm750fb: Remove unnecessary blank lines.

Removed multiple blank lines, which are not required. This patch fixes
the following check patch issues:

CHECK: Please don't use multiple blank lines

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Varsha Rao 2017-02-27 15:39:47 +05:30 committed by Greg Kroah-Hartman
parent 47c565ea8d
commit 4e7f31c0d4
7 changed files with 0 additions and 26 deletions

View file

@ -12,7 +12,6 @@
#define PNL_2_PRI ((0 << PNL_2_OFFSET) | PNL_2_USAGE)
#define PNL_2_SEC ((2 << PNL_2_OFFSET) | PNL_2_USAGE)
/*
* primary timing & plane enable bit
* 1: 80000[8] & 80000[2] on
@ -24,7 +23,6 @@
#define PRI_TP_ON ((0x1 << PRI_TP_OFFSET) | PRI_TP_USAGE)
#define PRI_TP_OFF ((0x0 << PRI_TP_OFFSET) | PRI_TP_USAGE)
/*
* panel sequency status
* 80000[27:24]
@ -66,7 +64,6 @@
#define CRT_2_PRI ((0x0 << CRT_2_OFFSET) | CRT_2_USAGE)
#define CRT_2_SEC ((0x2 << CRT_2_OFFSET) | CRT_2_USAGE)
/*
* DAC affect both DVI and DSUB
* 4[20]
@ -87,8 +84,6 @@
#define DPMS_OFF ((3 << DPMS_OFFSET) | DPMS_USAGE)
#define DPMS_ON ((0 << DPMS_OFFSET) | DPMS_USAGE)
/*
* LCD1 means panel path TFT1 & panel path DVI (so enable DAC)
* CRT means crt path DSUB

View file

@ -5,7 +5,6 @@
#include "ddk750_dvi.h"
#include "ddk750_sii164.h"
/*
* This global variable contains all the supported driver and its corresponding
* function API. Please set the function pointer to NULL whenever the function
@ -30,7 +29,6 @@ static dvi_ctrl_device_t g_dcftSupportedDviController[] = {
#endif
};
int dviInit(
unsigned char edgeSelect,
unsigned char busSelect,
@ -56,5 +54,3 @@ int dviInit(
}
#endif

View file

@ -71,8 +71,6 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
return dispControl;
}
/* only timing related registers will be programed */
static int programModeRegisters(mode_parameter_t *pModeParam,
struct pll_value *pll)
@ -112,7 +110,6 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
((pModeParam->vertical_sync_start - 1) &
CRT_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
@ -219,5 +216,3 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
programModeRegisters(parm, &pll);
return 0;
}

View file

@ -9,7 +9,6 @@ typedef enum _spolarity_t {
}
spolarity_t;
typedef struct _mode_parameter_t {
/* Horizontal timing. */
unsigned long horizontal_total;
@ -37,5 +36,4 @@ mode_parameter_t;
int ddk750_setModeTiming(mode_parameter_t *, clock_type_t);
#endif

View file

@ -24,7 +24,6 @@ static unsigned int get_power_mode(void)
return peek32(POWER_MODE_CTRL) & POWER_MODE_CTRL_MODE_MASK;
}
/*
* SM50x can operate in one of three modes: 0, 1 or Sleep.
* On hardware reset, power mode 0 is default.
@ -80,8 +79,6 @@ void sm750_set_current_gate(unsigned int gate)
poke32(MODE0_GATE, gate);
}
/*
* This function enable/disable the 2D engine.
*/
@ -145,5 +142,3 @@ void sm750_enable_i2c(unsigned int enable)
sm750_set_current_gate(gate);
}

View file

@ -38,5 +38,4 @@ void sm750_enable_gpio(unsigned int enable);
*/
void sm750_enable_i2c(unsigned int enable);
#endif

View file

@ -532,7 +532,6 @@
#define GPIO_INTERRUPT_STATUS_26 BIT(17)
#define GPIO_INTERRUPT_STATUS_25 BIT(16)
#define PANEL_DISPLAY_CTRL 0x080000
#define PANEL_DISPLAY_CTRL_RESERVED_MASK 0xc0f08000
#define PANEL_DISPLAY_CTRL_SELECT_SHIFT 28
@ -1279,7 +1278,6 @@
#define I2C_DATA14 0x010052
#define I2C_DATA15 0x010053
#define ZV0_CAPTURE_CTRL 0x090000
#define ZV0_CAPTURE_CTRL_FIELD_INPUT BIT(27)
#define ZV0_CAPTURE_CTRL_SCAN BIT(26)
@ -1445,7 +1443,6 @@
#define DEFAULT_I2C_SCL 30
#define DEFAULT_I2C_SDA 31
#define GPIO_DATA_SM750LE 0x020018
#define GPIO_DATA_SM750LE_1 BIT(1)
#define GPIO_DATA_SM750LE_0 BIT(0)
@ -1454,5 +1451,4 @@
#define GPIO_DATA_DIRECTION_SM750LE_1 BIT(1)
#define GPIO_DATA_DIRECTION_SM750LE_0 BIT(0)
#endif