redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

arm-soc: device tree description updates

Browse source 
This branch contains two kinds of updates: Some platforms in the process
 of getting converted to device tree based booting, and the platform
 specific patches necessary for that are included here. Other platforms
 are already converted, so we just need to update the actual device
 tree source files and the binding documents to add support for new board
 and new drivers.
 In the future we will probably separate those into two branches, and
 in the long run, the plan is to move the device tree source files out
 of the kernel repository, but that has to wait until we have completed
 a much larger portion of the binding documents.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2dbmCrR//JCVInAQJl0hAA3U3AnfBBXbKEJhUi47z6QU2kRPVfyjAj
 ct+FsZMWFihEHC5/YkB/bQ/i7Hf/AKBZRG6eAUfsyevuhQ0Li+wsRM4eU3FaF6kw
 HNqqB6GQWM+2rR8//Y6AAZymTLfe5nbuWFhRXiIggIlQne5jJ1kSidmSzG+OJEuN
 sAKXX7Ud5goVsby9Uwp4Gc0fpDsjFmIarhHfMDizFozNZIFzZIhKKdl1VOf+Kv+o
 PFRfCGB2KQrrDy0oB62y3iNUiK84LA0xWX4KkI9rD4OHWeiDQpbUITchf//Wa20X
 vgZdI8T16sxbmAHi1zerIl8y/CLgLyerp1L3KSMGTwirC+92vZg+jOGYGgNqu973
 NOl0IBQFpbAlNzmf52naNgcQ2OxxFQ3ogrlpvE2bItLL7J3vpmn1JwWMTtSrcs3Z
 xgbovAq2ivNOiKpzXexvMsWDCU3PxzXaP+2hEUhglJcdXkx5Iwiwi6un2FuF2qWT
 l5rSAWkg2kT/OkgYHLBI5JW7e7ugWhUAuCsrIH9eW7xstm4hIlN950vefs2FrZkP
 FeE7pn6s6mr98+j9isJKusETXIoEXDLX61vxA8PQP7GYN+/O/g2qB0qztBwarMBL
 wAdHCjavOYNwPkxYaGLjv9qKt3X575O/6aFa/NoKGhIECanjLl02Tqg02BdHecST
 8HENXCvwQns=
 =K3WL
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree description updates from Arnd Bergmann:
 "This branch contains two kinds of updates: Some platforms in the
  process of getting converted to device tree based booting, and the
  platform specific patches necessary for that are included here.

  Other platforms are already converted, so we just need to update the
  actual device tree source files and the binding documents to add
  support for new board and new drivers.

  In the future we will probably separate those into two branches, and
  in the long run, the plan is to move the device tree source files out
  of the kernel repository, but that has to wait until we have completed
  a much larger portion of the binding documents."

Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly
added clkdev registers next to a few removed unnecessary ones.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: LPC32xx: Add PWM to base dts file
  ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5
  ARM: EXYNOS: Add spi clock support for EXYNOS5
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4
  ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock
  ARM: ux500: Remove PMU platform registration when booting with DT
  ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure
  ARM: ux500: Ensure vendor specific properties have the vendor's identifier
  pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes
  ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled
  ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices
  ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree
  ARM: ux500: Apply ab8500-debug node do the db8500 DT structure
  ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices
  ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm
  ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl
  ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT
  ...
This commit is contained in:
Linus Torvalds 2012-07-23 16:17:43 -07:00
parent e66d637134 1fc5f7d5c6
commit 4f2d658b2f
111 changed files with 4520 additions and 527 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
Documentation/devicetree/bindings/arm/davinci/cp-intc.txt Normal file
View file

@ -0,0 +1,27 @@
* TI Common Platform Interrupt Controller
Common Platform Interrupt Controller (cp_intc) is used on
OMAP-L1x SoCs and can support several configurable number
of interrupts.
Main node required properties:
- compatible : should be:
"ti,cp-intc"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 1.
The cell contains the interrupt number in the range [0-128].
- ti,intc-size: Number of interrupts handled by the interrupt controller.
- reg: physical base address and size of the intc registers map.
Example:
intc: interrupt-controller@1 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
};

6
Documentation/devicetree/bindings/arm/olimex.txt Normal file
View file

@ -0,0 +1,6 @@
Olimex i.MX Platforms Device Tree Bindings
------------------------------------------
i.MX23 Olinuxino Low Cost Board
Required root node properties:
- compatible = "olimex,imx23-olinuxino", "fsl,imx23";

3
Documentation/devicetree/bindings/arm/omap/omap.txt
View file

@ -47,3 +47,6 @@ Boards:
- AM335X EVM : Software Developement Board for AM335x
compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
- AM335X Bone : Low cost community board
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"

19
Documentation/devicetree/bindings/fb/mxsfb.txt Normal file
View file

@ -0,0 +1,19 @@
* Freescale MXS LCD Interface (LCDIF)
Required properties:
- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
imx23 and imx28.
- reg: Address and length of the register set for lcdif
- interrupts: Should contain lcdif interrupts
Optional properties:
- panel-enable-gpios : Should specify the gpio for panel enable
Examples:
lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
panel-enable-gpios = <&gpio3 30 0>;
};

14
Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
View file

@ -8,8 +8,16 @@ Required properties:
by low 16 pins and the second one is for high 16 pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
the second cell is used to specify the gpio polarity:
0 = active high
1 = active low
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
4 = active high level-sensitive.
8 = active low level-sensitive.
Example:
@ -19,4 +27,6 @@ gpio0: gpio@73f84000 {
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};

5
Documentation/devicetree/bindings/gpio/gpio-mxs.txt
View file

@ -13,8 +13,9 @@ Required properties for GPIO node:
- interrupts : Should be the port interrupt shared by all 32 pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
the second cell is used to specify the gpio polarity:
0 = active high
1 = active low
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:

2
Documentation/devicetree/bindings/gpio/gpio-nmk.txt
View file

@ -26,6 +26,6 @@ Example:
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
supports-sleepmode;
st,supports-sleepmode;
gpio-bank = <1>;
};

16
Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt Normal file
View file

@ -0,0 +1,16 @@
* STMP3xxx/i.MX28 Time Clock controller
Required properties:
- compatible: should be one of the following.
* "fsl,stmp3xxx-rtc"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: rtc alarm interrupt
Example:
rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
reg = <0x80056000 2000>;
interrupts = <29>;
};

116
Documentation/devicetree/bindings/spi/spi-samsung.txt Normal file
View file

@ -0,0 +1,116 @@
* Samsung SPI Controller
The Samsung SPI controller is used to interface with various devices such as flash
and display controllers using the SPI communication interface.
Required SoC Specific Properties:
- compatible: should be one of the following.
- samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
- samsung,s3c6410-spi: for s3c6410 platforms
- samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms
- samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
- samsung,exynos4210-spi: for exynos4 and exynos5 platforms
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
[PRELIMINARY: the dma channel allocation will change once there are
official DMA bindings]
- tx-dma-channel: The dma channel specifier for tx operations. The format of
the dma specifier depends on the dma controller.
- rx-dma-channel: The dma channel specifier for rx operations. The format of
the dma specifier depends on the dma controller.
Required Board Specific Properties:
- #address-cells: should be 1.
- #size-cells: should be 0.
- gpios: The gpio specifier for clock, mosi and miso interface lines (in the
order specified). The format of the gpio specifier depends on the gpio
controller.
Optional Board Specific Properties:
- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
select the clock source for the spi bus clock, this property can be used to
indicate the clock to be used for driving the spi bus clock. If not specified,
the clock number 0 is used as default.
- num-cs: Specifies the number of chip select lines supported. If
not specified, the default number of chip select lines is set to 1.
SPI Controller specific data in SPI slave nodes:
- The spi slave nodes should provide the following information which is required
by the spi controller.
- cs-gpio: A gpio specifier that specifies the gpio line used as
the slave select line by the spi controller. The format of the gpio
specifier depends on the gpio controller.
- samsung,spi-feedback-delay: The sampling phase shift to be applied on the
miso line (to account for any lag in the miso line). The following are the
valid values.
- 0: No phase shift.
- 1: 90 degree phase shift sampling.
- 2: 180 degree phase shift sampling.
- 3: 270 degree phase shift sampling.
Aliases:
- All the SPI controller nodes should be represented in the aliases node using
the following format 'spi{n}' where n is a unique number for the alias.
Example:
- SoC Specific Portion:
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 5>;
rx-dma-channel = <&pdma0 4>;
};
- Board Specific Portion:
spi_0: spi@12d20000 {
#address-cells = <1>;
#size-cells = <0>;
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <10000>;
controller-data {
cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};

27
Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt Normal file
View file

@ -0,0 +1,27 @@
* Freescale MXS Application UART (AUART)
Required properties:
- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
imx23 and imx28.
- reg : Address and length of the register set for the device
- interrupts : Should contain the auart interrupt numbers
Example:
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
};
Note: Each auart port should have an alias correctly numbered in "aliases"
node.
Example:
aliases {
serial0 = &auart0;
serial1 = &auart1;
serial2 = &auart2;
serial3 = &auart3;
serial4 = &auart4;
};

14
Documentation/devicetree/bindings/watchdog/omap-wdt.txt Normal file
View file

@ -0,0 +1,14 @@
TI Watchdog Timer (WDT) Controller for OMAP
Required properties:
compatible:
- "ti,omap3-wdt" for OMAP3
- "ti,omap4-wdt" for OMAP4
- ti,hwmods: Name of the hwmod associated to the WDT
Examples:
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};

113
arch/arm/boot/dts/aks-cdu.dts Normal file
View file

@ -0,0 +1,113 @@
/*
* aks-cdu.dts - Device Tree file for AK signal CDU
*
* Copyright (C) 2012 AK signal Brno a.s.
* 2012 Jiri Prchal <jiri.prchal@aksignal.cz>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "ge863-pro3.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
};
ahb {
apb {
usart0: serial@fffb0000 {
status = "okay";
};
usart1: serial@fffb4000 {
status = "okay";
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
usart2: serial@fffb8000 {
status = "okay";
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
usart3: serial@fffd0000 {
status = "okay";
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 15 0>;
status = "okay";
};
};
usb0: ohci@00500000 {
num-ports = <2>;
status = "okay";
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
bootstrap@0 {
label = "bootstrap";
reg = <0x0 0x40000>;
};
uboot@40000 {
label = "uboot";
reg = <0x40000 0x80000>;
};
ubootenv@c0000 {
label = "ubootenv";
reg = <0xc0000 0x40000>;
};
kernel@100000 {
label = "kernel";
reg = <0x100000 0x400000>;
};
rootfs@500000 {
label = "rootfs";
reg = <0x500000 0x7b00000>;
};
};
};
leds {
compatible = "gpio-leds";
red {
gpios = <&pioC 10 0>;
linux,default-trigger = "none";
};
green {
gpios = <&pioA 5 1>;
linux,default-trigger = "none";
default-state = "on";
};
yellow {
gpios = <&pioB 20 1>;
linux,default-trigger = "none";
};
blue {
gpios = <&pioB 21 1>;
linux,default-trigger = "none";
};
};
};

20
arch/arm/boot/dts/am335x-bone.dts Normal file
View file

@ -0,0 +1,20 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "am33xx.dtsi"
/ {
model = "TI AM335x BeagleBone";
compatible = "ti,am335x-bone", "ti,am33xx";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};

20
arch/arm/boot/dts/am335x-evm.dts Normal file
View file

@ -0,0 +1,20 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "am33xx.dtsi"
/ {
model = "TI AM335x EVM";
compatible = "ti,am335x-evm", "ti,am33xx";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};

158
arch/arm/boot/dts/am33xx.dtsi Normal file
View file

@ -0,0 +1,158 @@
/*
* Device Tree Source for AM33XX SoC
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "ti,am33xx";
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
};
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
};
};
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap3-mpu";
ti,hwmods = "mpu";
};
};
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex.Since
* that will not bring real advantage to represent that in DT
* for the moment, just use a fake OCP bus entry to represent
* the whole bus hierarchy.
*/
ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main";
intc: interrupt-controller@48200000 {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <128>;
reg = <0x48200000 0x1000>;
};
gpio1: gpio@44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio2: gpio@4804C000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio3: gpio@481AC000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio4: gpio@481AE000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
uart1: serial@44E09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@481A6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
uart5: serial@481A8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
uart6: serial@481AA000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
i2c1: i2c@44E0B000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
};
i2c2: i2c@4802A000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
};
i2c3: i2c@4819C000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
};
};
};

32
arch/arm/boot/dts/am3517-evm.dts Normal file
View file

@ -0,0 +1,32 @@
/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap3.dtsi"
/ {
model = "TI AM3517 EVM (AM3517/05)";
compatible = "ti,am3517-evm", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
&i2c1 {
clock-frequency = <400000>;
};
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
};

77
arch/arm/boot/dts/db8500.dtsi
View file

@ -48,7 +48,7 @@
};
rtc@80154000 {
compatible = "stericsson,db8500-rtc";
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
interrupts = <0 18 0x4>;
};
@ -60,7 +60,7 @@
interrupts = <0 119 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
@ -73,7 +73,7 @@
interrupts = <0 120 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
@ -86,7 +86,7 @@
interrupts = <0 121 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
@ -99,7 +99,7 @@
interrupts = <0 122 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
@ -112,7 +112,7 @@
interrupts = <0 123 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <4>;
@ -125,7 +125,7 @@
interrupts = <0 124 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <5>;
@ -138,7 +138,7 @@
interrupts = <0 125 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <6>;
@ -151,7 +151,7 @@
interrupts = <0 126 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <7>;
@ -164,7 +164,7 @@
interrupts = <0 127 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
supports-sleepmode;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <8>;
@ -331,6 +331,63 @@
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 0x4
18 0x4>;
interrupt-names = "60S", "ALARM";
};
ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
interrupts = <32 0x4
39 0x4>;
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ab8500-usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 0x4
96 0x4
14 0x4
15 0x4
79 0x4
74 0x4
75 0x4>;
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
"VBUS_DET_R",
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
ab8500-ponkey {
compatible = "stericsson,ab8500-ponkey";
interrupts = <6 0x4
7 0x4>;
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
ab8500-sysctrl {
compatible = "stericsson,ab8500-sysctrl";
};
ab8500-pwm {
compatible = "stericsson,ab8500-pwm";
};
ab8500-debugfs {
compatible = "stericsson,ab8500-debug";
};
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";

17
arch/arm/boot/dts/ea3250.dts
View file

@ -152,6 +152,23 @@
uart1: serial@40014000 {
status = "okay";
};
/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
adc@40048000 {
status = "okay";
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
button@21 {
label = "GPIO Key UP";
linux,code = <103>;
gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
};
};
};

41
arch/arm/boot/dts/evk-pro3.dts Normal file
View file

@ -0,0 +1,41 @@
/*
* evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
*
* Copyright (C) 2012 Telit,
* 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "ge863-pro3.dtsi"
/ {
model = "Telit EVK-PRO3 for Telit GE863-PRO3";
compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
ahb {
apb {
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
};
usb0: ohci@00500000 {
num-ports = <2>;
status = "okay";
};
};
i2c@0 {
status = "okay";
};
};

12
arch/arm/boot/dts/exynos4210-origen.dts
View file

@ -134,4 +134,16 @@
i2c@138D0000 {
status = "disabled";
};
spi_0: spi@13920000 {
status = "disabled";
};
spi_1: spi@13930000 {
status = "disabled";
};
spi_2: spi@13940000 {
status = "disabled";
};
};

38
arch/arm/boot/dts/exynos4210-smdkv310.dts
View file

@ -179,4 +179,42 @@
i2c@138D0000 {
status = "disabled";
};
spi_0: spi@13920000 {
status = "disabled";
};
spi_1: spi@13930000 {
status = "disabled";
};
spi_2: spi@13940000 {
gpios = <&gpc1 1 5 3 0>,
<&gpc1 3 5 3 0>,
<&gpc1 4 5 3 0>;
w25x80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
cs-gpio = <&gpc1 2 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};
};

47
arch/arm/boot/dts/exynos4210.dtsi
View file

@ -25,6 +25,12 @@
compatible = "samsung,exynos4210";
interrupt-parent = <&gic>;
aliases {
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
};
gic:interrupt-controller@10490000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@ -33,6 +39,17 @@
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
combiner:interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10440000 0x1000>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
@ -147,6 +164,36 @@
interrupts = <0 65 0>;
};
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 7>; /* preliminary */
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
interrupts = <0 67 0>;
tx-dma-channel = <&pdma1 7>; /* preliminary */
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
interrupts = <0 68 0>;
tx-dma-channel = <&pdma0 9>; /* preliminary */
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;

38
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file

@ -71,4 +71,42 @@
i2c@12CD0000 {
status = "disabled";
};
spi_0: spi@12d20000 {
status = "disabled";
};
spi_1: spi@12d30000 {
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
partition@0 {
label = "U-Boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "Kernel";
reg = <0x40000 0xc0000>;
};
};
};
spi_2: spi@12d40000 {
status = "disabled";
};
};

36
arch/arm/boot/dts/exynos5250.dtsi
View file

@ -23,6 +23,12 @@
compatible = "samsung,exynos5250";
interrupt-parent = <&gic>;
aliases {
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
};
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@ -146,6 +152,36 @@
#size-cells = <0>;
};
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
tx-dma-channel = <&pdma0 5>; /* preliminary */
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
interrupts = <0 67 0>;
tx-dma-channel = <&pdma1 5>; /* preliminary */
rx-dma-channel = <&pdma1 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
interrupts = <0 68 0>;
tx-dma-channel = <&pdma0 7>; /* preliminary */
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;

52
arch/arm/boot/dts/ge863-pro3.dtsi Normal file
View file

@ -0,0 +1,52 @@
/*
* ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
*
* Copyright (C) 2012 Telit,
* 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "at91sam9260.dtsi"
/ {
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <6000000>;
};
};
ahb {
apb {
dbgu: serial@fffff200 {
status = "okay";
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
boot@0 {
label = "boot";
reg = <0x0 0x7c0000>;
};
root@07c0000 {
label = "root";
reg = <0x7c0000 0x7840000>;
};
};
};
chosen {
bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
};
};

66
arch/arm/boot/dts/imx23-evk.dts
View file

@ -22,17 +22,60 @@
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
status = "okay";
};
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
bus-width = <8>;
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
bus-width = <4>;
wp-gpios = <&gpio1 30 0>;
vmmc-supply = <&reg_vddio_sd0>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
panel-enable-gpios = <&gpio1 18 0>;
status = "okay";
};
};
apbx@80040000 {
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pins_a>;
status = "okay";
};
auart0: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
@ -40,4 +83,23 @@
};
};
};
regulators {
compatible = "simple-bus";
reg_vddio_sd0: vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
};

44
arch/arm/boot/dts/imx23-olinuxino.dts Normal file
View file

@ -0,0 +1,44 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx23.dtsi"
/ {
model = "i.MX23 Olinuxino Low Cost Board";
compatible = "olimex,imx23-olinuxino", "fsl,imx23";
memory {
reg = <0x40000000 0x04000000>;
};
apb@80000000 {
apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
bus-width = <4>;
status = "okay";
};
};
apbx@80040000 {
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
};
};
};

78
arch/arm/boot/dts/imx23-stmp378x_devb.dts Normal file
View file

@ -0,0 +1,78 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx23.dtsi"
/ {
model = "Freescale STMP378x Development Board";
compatible = "fsl,stmp378x-devb", "fsl,imx23";
memory {
reg = <0x40000000 0x04000000>;
};
apb@80000000 {
apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
bus-width = <4>;
wp-gpios = <&gpio1 30 0>;
vmmc-supply = <&reg_vddio_sd0>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
};
apbx@80040000 {
auart0: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
};
};
regulators {
compatible = "simple-bus";
reg_vddio_sd0: vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
};
};

169
arch/arm/boot/dts/imx23.dtsi
View file

@ -18,6 +18,8 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
serial0 = &auart0;
serial1 = &auart1;
};
cpus {
@ -57,13 +59,15 @@
status = "disabled";
};
bch@8000a000 {
reg = <0x8000a000 2000>;
status = "disabled";
};
gpmi@8000c000 {
reg = <0x8000c000 2000>;
gpmi-nand@8000c000 {
compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x8000c000 2000>, <0x8000a000 2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@ -114,24 +118,151 @@
duart_pins_a: duart@0 {
reg = <0>;
fsl,pinmux-ids = <0x11a2 0x11b2>;
fsl,pinmux-ids = <
0x11a2 /* MX23_PAD_PWM0__DUART_RX */
0x11b2 /* MX23_PAD_PWM1__DUART_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart0_pins_a: auart0@0 {
reg = <0>;
fsl,pinmux-ids = <
0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_pins_fixup: gpmi-pins-fixup {
fsl,pinmux-ids = <
0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
>;
fsl,drive-strength = <2>;
};
mmc0_4bit_pins_a: mmc0-4bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <0x2020 0x2030 0x2040
0x2050 0x0082 0x0092 0x00a2
0x00b2 0x2000 0x2010 0x2060>;
fsl,pinmux-ids = <
0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_pins_fixup: mmc0-pins-fixup {
fsl,pinmux-ids = <0x2010 0x2060>;
fsl,pinmux-ids = <
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
>;
fsl,pull-up = <0>;
};
pwm2_pins_a: pwm2@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11c0 /* MX23_PAD_PWM2__PWM2 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
@ -172,7 +303,9 @@
};
lcdif@80030000 {
compatible = "fsl,imx23-lcdif";
reg = <0x80030000 2000>;
interrupts = <46 45>;
status = "disabled";
};
@ -242,12 +375,16 @@
};
rtc@8005c000 {
compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
reg = <0x8005c000 2000>;
status = "disabled";
interrupts = <22>;
};
pwm@80064000 {
pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
reg = <0x80064000 2000>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
};
@ -257,12 +394,16 @@
};
auart0: serial@8006c000 {
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
status = "disabled";
};
auart1: serial@8006e000 {
compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <59 60 58>;
status = "disabled";
};

41
arch/arm/boot/dts/imx27-3ds.dts Normal file
View file

@ -0,0 +1,41 @@
/*
* Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx27.dtsi"
/ {
model = "mx27_3ds";
compatible = "freescale,imx27-3ds", "fsl,imx27";
memory {
reg = <0x0 0x0>;
};
soc {
aipi@10000000 { /* aipi */
wdog@10002000 {
status = "okay";
};
uart@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
fec@1002b000 {
status = "okay";
};
};
};
};

12
arch/arm/boot/dts/imx27.dtsi
View file

@ -121,7 +121,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@10015100 {
@ -131,7 +131,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@10015200 {
@ -141,7 +141,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@10015300 {
@ -151,7 +151,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio5: gpio@10015400 {
@ -161,7 +161,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@10015500 {
@ -171,7 +171,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
cspi3: cspi@10017000 {

198
arch/arm/boot/dts/imx28-apx4devkit.dts Normal file
View file

@ -0,0 +1,198 @@
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "Bluegiga APX4 Development Kit";
compatible = "bluegiga,apx4devkit", "fsl,imx28";
memory {
reg = <0x40000000 0x04000000>;
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
};
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
bus-width = <4>;
status = "okay";
};
ssp2: ssp@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
bus-width = <4>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_apx4: lcdif-apx4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
fsl,pinmux-ids = <
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
>;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_apx4>;
status = "okay";
};
};
apbx@80040000 {
saif0: saif@80042000 {
pinctrl-names = "default";
pinctrl-0 = <&saif0_pins_a>;
status = "okay";
};
saif1: saif@80046000 {
pinctrl-names = "default";
pinctrl-0 = <&saif1_pins_a>;
fsl,saif-master = <&saif0>;
status = "okay";
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
};
pcf8563: rtc@51 {
compatible = "phg,pcf8563";
reg = <0x51>;
};
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
auart1: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart1_2pins_a>;
status = "okay";
};
auart2: serial@8006e000 {
pinctrl-names = "default";
pinctrl-0 = <&auart2_2pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
sound {
compatible = "bluegiga,apx4devkit-sgtl5000",
"fsl,mxs-audio-sgtl5000";
model = "apx4devkit-sgtl5000";
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio3 28 0>;
linux,default-trigger = "heartbeat";
};
};
};

52
arch/arm/boot/dts/imx28-cfa10036.dts Normal file
View file

@ -0,0 +1,52 @@
/*
* Copyright 2012 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "Crystalfontz CFA-10036 Board";
compatible = "crystalfontz,cfa10036", "fsl,imx28";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <4>;
status = "okay";
};
};
apbx@80040000 {
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_b>;
status = "okay";
};
};
};
leds {
compatible = "gpio-leds";
power {
gpios = <&gpio3 4 1>;
default-state = "on";
};
};
};

164
arch/arm/boot/dts/imx28-evk.dts
View file

@ -22,6 +22,13 @@
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
&gpmi_pins_evk>;
status = "okay";
};
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
@ -29,6 +36,7 @@
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio2 12 0>;
vmmc-supply = <&reg_vddio_sd0>;
status = "okay";
};
@ -36,6 +44,72 @@
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_pins_evk: gpmi-nand-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_evk: lcdif-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
panel-enable-gpios = <&gpio3 30 0>;
status = "okay";
};
can0: can@80032000 {
pinctrl-names = "default";
pinctrl-0 = <&can0_pins_a>;
status = "okay";
};
can1: can@80034000 {
pinctrl-names = "default";
pinctrl-0 = <&can1_pins_a>;
status = "okay";
};
};
@ -68,19 +142,58 @@
};
};
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pins_a>;
status = "okay";
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
auart3: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&auart3_pins_a>;
status = "okay";
};
usbphy0: usbphy@8007c000 {
status = "okay";
};
usbphy1: usbphy@8007e000 {
status = "okay";
};
};
};
ahb@80080000 {
usb0: usb@80080000 {
vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};
usb1: usb@80090000 {
vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-supply = <&reg_fec_3v3>;
phy-reset-gpios = <&gpio4 13 0>;
phy-reset-duration = <100>;
status = "okay";
};
@ -102,6 +215,40 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vddio_sd0: vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
reg_fec_3v3: fec-3v3 {
compatible = "regulator-fixed";
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
reg_usb0_vbus: usb0_vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
enable-active-high;
};
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 8 0>;
enable-active-high;
};
};
sound {
@ -111,4 +258,21 @@
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio3 5 0>;
linux,default-trigger = "heartbeat";
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
};

210
arch/arm/boot/dts/imx28-m28evk.dts Normal file
View file

@ -0,0 +1,210 @@
/*
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "DENX M28EVK";
compatible = "denx,m28evk", "fsl,imx28";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
partition@0 {
label = "bootloader";
reg = <0x00000000 0x00300000>;
read-only;
};
partition@1 {
label = "environment";
reg = <0x00300000 0x00080000>;
};
partition@2 {
label = "redundant-environment";
reg = <0x00380000 0x00080000>;
};
partition@3 {
label = "kernel";
reg = <0x00400000 0x00400000>;
};
partition@4 {
label = "filesystem";
reg = <0x00800000 0x0f800000>;
};
};
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
&mmc0_cd_cfg
&mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio3 10 1>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_m28: lcdif-m28@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_m28>;
status = "okay";
};
can0: can@80032000 {
pinctrl-names = "default";
pinctrl-0 = <&can0_pins_a>;
status = "okay";
};
can1: can@80034000 {
pinctrl-names = "default";
pinctrl-0 = <&can1_pins_a>;
status = "okay";
};
};
apbx@80040000 {
saif0: saif@80042000 {
pinctrl-names = "default";
pinctrl-0 = <&saif0_pins_a>;
status = "okay";
};
saif1: saif@80046000 {
pinctrl-names = "default";
pinctrl-0 = <&saif1_pins_a>;
fsl,saif-master = <&saif0>;
status = "okay";
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
};
eeprom: eeprom@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;
};
rtc: rtc@68 {
compatible = "stm,mt41t62";
reg = <0x68>;
};
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
auart3: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&auart3_pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-reset-gpios = <&gpio3 11 0>;
status = "okay";
};
mac1: ethernet@800f4000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac1_pins_a>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
sound {
compatible = "denx,m28evk-sgtl5000",
"fsl,mxs-audio-sgtl5000";
model = "m28evk-sgtl5000";
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
};

97
arch/arm/boot/dts/imx28-tx28.dts Normal file
View file

@ -0,0 +1,97 @@
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "Ka-Ro electronics TX28 module";
compatible = "karo,tx28", "fsl,imx28";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_cd_cfg
&mmc0_sck_cfg>;
bus-width = <4>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
};
apbx@80040000 {
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
ds1339: rtc@68 {
compatible = "mxim,ds1339";
reg = <0x68>;
};
};
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
status = "okay";
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_4pins_a>;
status = "okay";
};
auart1: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart1_pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
status = "okay";
};
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio4 10 0>;
linux,default-trigger = "heartbeat";
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
};

353
arch/arm/boot/dts/imx28.dtsi
View file

@ -22,6 +22,11 @@
gpio4 = &gpio4;
saif0 = &saif0;
saif1 = &saif1;
serial0 = &auart0;
serial1 = &auart1;
serial2 = &auart2;
serial3 = &auart3;
serial4 = &auart4;
};
cpus {
@ -68,15 +73,15 @@
status = "disabled";
};
bch@8000a000 {
reg = <0x8000a000 2000>;
interrupts = <41>;
status = "disabled";
};
gpmi@8000c000 {
reg = <0x8000c000 2000>;
interrupts = <42 88>;
gpmi-nand@8000c000 {
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x8000c000 2000>, <0x8000a000 2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@ -161,7 +166,150 @@
duart_pins_a: duart@0 {
reg = <0>;
fsl,pinmux-ids = <0x3102 0x3112>;
fsl,pinmux-ids = <
0x3102 /* MX28_PAD_PWM0__DUART_RX */
0x3112 /* MX28_PAD_PWM1__DUART_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
duart_pins_b: duart@1 {
reg = <1>;
fsl,pinmux-ids = <
0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
duart_4pins_a: duart-4pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_status_cfg: gpmi-status-cfg {
fsl,pinmux-ids = <
0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
>;
fsl,drive-strength = <2>;
};
auart0_pins_a: auart0@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart0_2pins_a: auart0-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart1_pins_a: auart1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart1_2pins_a: auart1-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart2_2pins_a: auart2-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
auart3_2pins_a: auart3-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
@ -169,9 +317,17 @@
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <0x4000 0x4010 0x4020
0x4030 0x4040 0x4060 0x4070
0x4080 0x4100>;
fsl,pinmux-ids = <
0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@ -179,8 +335,14 @@
mac1_pins_a: mac1@0 {
reg = <0>;
fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
0x40e1 0x40b1 0x40c1>;
fsl,pinmux-ids = <
0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@ -188,28 +350,61 @@
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
fsl,pinmux-ids = <0x2000 0x2010 0x2020
0x2030 0x2040 0x2050 0x2060
0x2070 0x2080 0x2090 0x20a0>;
fsl,pinmux-ids = <
0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_4bit_pins_a: mmc0-4bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_cd_cfg: mmc0-cd-cfg {
fsl,pinmux-ids = <0x2090>;
fsl,pinmux-ids = <
0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
>;
fsl,pull-up = <0>;
};
mmc0_sck_cfg: mmc0-sck-cfg {
fsl,pinmux-ids = <0x20a0>;
fsl,pinmux-ids = <
0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
>;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
i2c0_pins_a: i2c0@0 {
reg = <0>;
fsl,pinmux-ids = <0x3180 0x3190>;
fsl,pinmux-ids = <
0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@ -217,8 +412,12 @@
saif0_pins_a: saif0@0 {
reg = <0>;
fsl,pinmux-ids =
<0x3140 0x3150 0x3160 0x3170>;
fsl,pinmux-ids = <
0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@ -226,11 +425,88 @@
saif1_pins_a: saif1@0 {
reg = <0>;
fsl,pinmux-ids = <0x31a0>;
fsl,pinmux-ids = <
0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
>;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
pwm0_pins_a: pwm0@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3100 /* MX28_PAD_PWM0__PWM_0 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
pwm2_pins_a: pwm2@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3120 /* MX28_PAD_PWM2__PWM_2 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
can0_pins_a: can0@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
can1_pins_a: can1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
digctl@8001c000 {
@ -272,18 +548,21 @@
};
lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80032000 2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80034000 2000>;
interrupts = <9>;
status = "disabled";
@ -370,9 +649,9 @@
};
rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
reg = <0x80056000 2000>;
interrupts = <28 29>;
status = "disabled";
interrupts = <29>;
};
i2c0: i2c@80058000 {
@ -393,8 +672,11 @@
status = "disabled";
};
pwm@80064000 {
pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
reg = <0x80064000 2000>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
};
@ -404,30 +686,35 @@
};
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
status = "disabled";
};
auart1: serial@8006c000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
status = "disabled";
};
auart2: serial@8006e000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
status = "disabled";
};
auart3: serial@80070000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
status = "disabled";
};
auart4: serial@80072000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
status = "disabled";
@ -441,11 +728,13 @@
};
usbphy0: usbphy@8007c000 {
compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007e000 0x2000>;
status = "disabled";
};
@ -459,13 +748,19 @@
reg = <0x80080000 0x80000>;
ranges;
usbctrl0: usbctrl@80080000 {
usb0: usb@80080000 {
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
interrupts = <93>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
usbctrl1: usbctrl@80090000 {
usb1: usb@80090000 {
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
interrupts = <92>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};

31
arch/arm/boot/dts/imx31-bug.dts Normal file
View file

@ -0,0 +1,31 @@
/*
* Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx31.dtsi"
/ {
model = "Buglabs i.MX31 Bug 1.x";
compatible = "fsl,imx31-bug", "fsl,imx31";
memory {
reg = <0x80000000 0x8000000>; /* 128M */
};
soc {
aips@43f00000 { /* AIPS1 */
uart5: serial@43fb4000 {
fsl,uart-has-rtscts;
status = "okay";
};
};
};
};

88
arch/arm/boot/dts/imx31.dtsi Normal file
View file

@ -0,0 +1,88 @@
/*
* Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
};
avic: avic-interrupt-controller@60000000 {
compatible = "fsl,imx31-avic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x60000000 0x100000>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&avic>;
ranges;
aips@43f00000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x43f00000 0x100000>;
ranges;
uart1: serial@43f90000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
status = "disabled";
};
uart2: serial@43f94000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f94000 0x4000>;
interrupts = <32>;
status = "disabled";
};
uart4: serial@43fb0000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43fb0000 0x4000>;
interrupts = <46>;
status = "disabled";
};
uart5: serial@43fb4000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43fb4000 0x4000>;
interrupts = <47>;
status = "disabled";
};
};
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x100000>;
ranges;
uart3: serial@5000c000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <18>;
status = "disabled";
};
};
};
};

8
arch/arm/boot/dts/imx51.dtsi
View file

@ -133,7 +133,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@73f88000 {
@ -143,7 +143,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@73f8c000 {
@ -153,7 +153,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@73f90000 {
@ -163,7 +163,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
wdog@73f98000 { /* WDOG1 */

14
arch/arm/boot/dts/imx53.dtsi
View file

@ -135,7 +135,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
@ -145,7 +145,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
@ -155,7 +155,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
@ -165,7 +165,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
wdog@53f98000 { /* WDOG1 */
@ -203,7 +203,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
@ -213,7 +213,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio7: gpio@53fe4000 {
@ -223,7 +223,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
i2c@53fec000 { /* I2C3 */

6
arch/arm/boot/dts/imx6q-arm2.dts
View file

@ -22,6 +22,12 @@
};
soc {
gpmi-nand@00112000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_1>;
status = "disabled"; /* gpmi nand conflicts with SD */
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
phy-mode = "rgmii";

33
arch/arm/boot/dts/imx6q-sabrelite.dts
View file

@ -27,6 +27,8 @@
ecspi@02008000 { /* eCSPI1 */
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
status = "okay";
flash: m25p80@0 {
@ -42,9 +44,31 @@
};
};
iomuxc@020e0000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_hog>;
gpios {
pinctrl_gpio_hog: gpiohog {
fsl,pins = <
144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
>;
};
};
};
};
aips-bus@02100000 { /* AIPS2 */
usb@02184000 { /* USB OTG */
vbus-supply = <&reg_usb_otg_vbus>;
status = "okay";
};
usb@02184200 { /* USB1 */
status = "okay";
};
ethernet@02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
@ -111,6 +135,15 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
};
};
sound {

99
arch/arm/boot/dts/imx6q.dtsi
View file

@ -87,6 +87,23 @@
interrupt-parent = <&intc>;
ranges;
dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
};
gpmi-nand@00112000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <0 13 0x04>, <0 15 0x04>;
interrupt-names = "gpmi-dma", "bch";
fsl,gpmi-dma-channel = <0>;
status = "disabled";
};
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
@ -266,7 +283,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@020a0000 {
@ -276,7 +293,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@020a4000 {
@ -286,7 +303,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@020a8000 {
@ -296,7 +313,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio5: gpio@020ac000 {
@ -306,7 +323,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@020b0000 {
@ -316,7 +333,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio7: gpio@020b4000 {
@ -326,7 +343,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
kpp@020b8000 {
@ -444,12 +461,14 @@
};
};
usbphy@020c9000 { /* USBPHY1 */
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
};
usbphy@020ca000 { /* USBPHY2 */
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
};
@ -495,6 +514,30 @@
};
};
gpmi-nand {
pinctrl_gpmi_nand_1: gpmi-nand-1 {
fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
@ -538,6 +581,14 @@
1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
};
};
};
dcic@020e4000 { /* DCIC1 */
@ -573,6 +624,36 @@
reg = <0x0217c000 0x4000>;
};
usb@02184000 { /* USB OTG */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
usb@02184200 { /* USB1 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
fsl,usbphy = <&usbphy2>;
status = "disabled";
};
usb@02184400 { /* USB2 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
status = "disabled";
};
usb@02184600 { /* USB3 */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
status = "disabled";
};
ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;

5
arch/arm/boot/dts/lpc32xx.dtsi
View file

@ -278,6 +278,11 @@
status = "disabled";
};
pwm: pwm@4005C000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x8>;
status = "disabled";
};
};
};
};

20
arch/arm/boot/dts/omap2420-h4.dts Normal file
View file

@ -0,0 +1,20 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap2.dtsi"
/ {
model = "TI OMAP2420 H4 board";
compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
memory {
device_type = "memory";
reg = <0x80000000 0x84000000>; /* 64 MB */
};
};

28
arch/arm/boot/dts/omap3-evm.dts
View file

@ -18,3 +18,31 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
};
/include/ "twl4030.dtsi"
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
/*
* TVP5146 Video decoder-in for analog input support.
*/
tvp5146@5c {
compatible = "ti,tvp5146m2";
reg = <0x5c>;
};
};

5
arch/arm/boot/dts/omap3.dtsi
View file

@ -215,5 +215,10 @@
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc3";
};
wdt2: wdt@48314000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
};
};

37
arch/arm/boot/dts/omap4-panda.dts
View file

@ -32,6 +32,30 @@
linux,default-trigger = "mmc0";
};
};
sound: sound {
compatible = "ti,abe-twl6040";
ti,model = "PandaBoard";
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias",
"AFML", "Line In",
"AFMR", "Line In";
};
};
&i2c1 {
@ -43,6 +67,19 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
};
};
/include/ "twl6030.dtsi"

24
arch/arm/boot/dts/omap4-pandaES.dts Normal file
View file

@ -0,0 +1,24 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap4-panda.dts"
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
ti,model = "PandaBoardES";
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"AFML", "Line In",
"AFMR", "Line In";
};

68
arch/arm/boot/dts/omap4-sdp.dts
View file

@ -28,6 +28,14 @@
regulator-boot-on;
};
vbat: fixedregulator@2 {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <3750000>;
regulator-max-microvolt = <3750000>;
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
debug0 {
@ -70,6 +78,41 @@
gpios = <&gpio5 11 0>; /* 139 */
};
};
sound {
compatible = "ti,abe-twl6040";
ti,model = "SDP4430";
ti,jack-detection = <1>;
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,dmic = <&dmic>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Earphone Spk", "EP",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"Vibrator", "VIBRAL",
"Vibrator", "VIBRAR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias",
"MAINMIC", "Main Handset Mic",
"Main Handset Mic", "Main Mic Bias",
"SUBMIC", "Sub Handset Mic",
"Sub Handset Mic", "Main Mic Bias",
"AFML", "Line In",
"AFMR", "Line In",
"DMic", "Digital Mic",
"Digital Mic", "Digital Mic1 Bias";
};
};
&i2c1 {
@ -81,6 +124,31 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
/* regulators for vibra motor */
vddvibl-supply = <&vbat>;
vddvibr-supply = <&vbat>;
vibra {
/* Vibra driver, motor resistance parameters */
ti,vibldrv-res = <8>;
ti,vibrdrv-res = <3>;
ti,viblmotor-res = <10>;
ti,vibrmotor-res = <10>;
};
};
};
/include/ "twl6030.dtsi"

96
arch/arm/boot/dts/omap4-var_som.dts Normal file
View file

@ -0,0 +1,96 @@
/*
* Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap4.dtsi"
/ {
model = "Variscite OMAP4 SOM";
compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
vdd_eth: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
regulator-boot-on;
};
};
&i2c1 {
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
};
/include/ "twl6030.dtsi"
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
/*
* Temperature Sensor
* http://www.ti.com/lit/ds/symlink/tmp105.pdf
*/
tmp105@49 {
compatible = "ti,tmp105";
reg = <0x49>;
};
};
&i2c4 {
clock-frequency = <400000>;
};
&mcspi1 {
eth@0 {
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio6>;
interrupts = <11>; /* gpio line 171 */
vdd-supply = <&vdd_eth>;
};
};
&mmc1 {
vmmc-supply = <&vmmc>;
ti,bus-width = <8>;
ti,non-removable;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&mmc4 {
status = "disabled";
};
&mmc5 {
ti,bus-width = <4>;
};

23
arch/arm/boot/dts/omap4.dtsi
View file

@ -272,5 +272,28 @@
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
mcpdm: mcpdm@40132000 {
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
dmic: dmic@4012e000 {
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
};
};

21
arch/arm/boot/dts/snowball.dts
View file

@ -77,6 +77,8 @@
used-led {
label = "user_led";
gpios = <&gpio4 14 0x4>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
@ -101,15 +103,30 @@
};
};
// External Micro SD slot
sdi@80126000 {
status = "enabled";
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
#gpio-cells = <1>;
cd-gpios = <&gpio6 26 0x4>; // 218
cd-inverted;
status = "okay";
};
// On-board eMMC
sdi@80114000 {
status = "enabled";
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
};
uart@80120000 {

85
arch/arm/boot/dts/tegra20-seaboard.dts
View file

@ -64,11 +64,6 @@
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc", "owc", "spdi", "spdo",
"uac";
nvidia,function = "rsvd2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
@ -129,14 +124,14 @@
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "spdi", "spdo", "uac";
nvidia,function = "rsvd2";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
pta {
nvidia,pins = "pta";
nvidia,function = "i2c2";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
@ -176,7 +171,7 @@
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd",
"cdev1", "cdev2", "dap1", "dap2",
"dap4", "dtf", "gma", "gmc", "gmd",
"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
"gme", "gpu", "gpu7", "i2cp", "irrx",
"irtx", "pta", "rm", "sdc", "sdd",
"slxd", "slxk", "spdi", "spdo", "uac",
@ -185,7 +180,7 @@
nvidia,tristate = <0>;
};
conf_ate {
nvidia,pins = "ate", "csus", "dap3", "ddc",
nvidia,pins = "ate", "csus", "dap3",
"gpv", "owc", "slxc", "spib", "spid",
"spie";
nvidia,pull = <0>;
@ -255,6 +250,39 @@
nvidia,slew-rate-falling = <3>;
};
};
state_i2cmux_ddc: pinmux_i2cmux_ddc {
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
};
};
state_i2cmux_pta: pinmux_i2cmux_pta {
ddc {
nvidia,pins = "ddc";
nvidia,function = "rsvd4";
};
pta {
nvidia,pins = "pta";
nvidia,function = "i2c2";
};
};
state_i2cmux_idle: pinmux_i2cmux_idle {
ddc {
nvidia,pins = "ddc";
nvidia,function = "rsvd4";
};
pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
};
};
};
i2s@70002800 {
@ -303,12 +331,37 @@
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
smart-battery@b {
compatible = "ti,bq20z75", "smart-battery-1.1";
reg = <0xb>;
ti,i2c-retry-count = <2>;
ti,poll-retry-count = <10>;
i2cmux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&{/i2c@7000c400}>;
pinctrl-names = "ddc", "pta", "idle";
pinctrl-0 = <&state_i2cmux_ddc>;
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
smart-battery@b {
compatible = "ti,bq20z75", "smart-battery-1.1";
reg = <0xb>;
ti,i2c-retry-count = <2>;
ti,poll-retry-count = <10>;
};
};
};

301
arch/arm/boot/dts/tegra20-whistler.dts Normal file
View file

@ -0,0 +1,301 @@
/dts-v1/;
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Tegra2 Whistler evaluation board";
compatible = "nvidia,whistler", "nvidia,tegra20";
memory {
reg = <0x00000000 0x20000000>;
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
"gmc", "gmd", "gpu";
nvidia,function = "gmi";
};
atc {
nvidia,pins = "atc", "atd";
nvidia,function = "sdio4";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "osc";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,function = "vi";
};
dte {
nvidia,pins = "dte";
nvidia,function = "rsvd1";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gme {
nvidia,pins = "gme";
nvidia,function = "dap5";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
nvidia,function = "kbc";
};
kbcb {
nvidia,pins = "kbcb", "kbcd";
nvidia,function = "sdio2";
};
lcsn {
nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
"spia", "spib", "spic";
nvidia,function = "spi3";
};
ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldc", "ldi",
"lhp0", "lhp1", "lhp2", "lhs", "lm0",
"lm1", "lpp", "lpw0", "lpw1", "lpw2",
"lsc0", "lsc1", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "uac";
nvidia,function = "owr";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd", "slxa",
"slxc", "slxd", "slxk";
nvidia,function = "sdio3";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
spdi {
nvidia,pins = "spdi", "spdo";
nvidia,function = "rsvd2";
};
spid {
nvidia,pins = "spid", "spie", "spig", "spih";
nvidia,function = "spi2_alt";
};
spif {
nvidia,pins = "spif";
nvidia,function = "spi2";
};
uaa {
nvidia,pins = "uaa", "uab";
nvidia,function = "uarta";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
uda {
nvidia,pins = "uda";
nvidia,function = "spi1";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
"gmb", "gmc", "gmd", "irrx", "irtx",
"kbca", "kbcb", "kbcc", "kbcd", "kbce",
"kbcf", "sdc", "sdd", "spie", "spig",
"spih", "uaa", "uab", "uad", "uca",
"ucb";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_atd {
nvidia,pins = "atd", "ate", "cdev1", "csus",
"dap1", "dap2", "dap3", "dap4", "dte",
"dtf", "gpu", "gpu7", "gpv", "i2cp",
"rm", "sdio1", "slxa", "slxc", "slxd",
"slxk", "spdi", "spdo", "uac", "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_cdev2 {
nvidia,pins = "cdev2", "spia", "spib";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "lc", "pmca",
"pmcb", "pmcc", "pmcd", "xm2c",
"xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd",
"spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
conf_gme {
nvidia,pins = "gme", "owc", "pta", "spic";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
conf_ls {
nvidia,pins = "ls", "pmce";
nvidia,pull = <2>;
};
drive_dap1 {
nvidia,pins = "drive_dap1";
nvidia,high-speed-mode = <0>;
nvidia,schmitt = <1>;
nvidia,low-power-mode = <0>;
nvidia,pull-down-strength = <0>;
nvidia,pull-up-strength = <0>;
nvidia,slew-rate-rising = <0>;
nvidia,slew-rate-falling = <0>;
};
};
};
i2s@70002800 {
status = "okay";
};
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
codec: codec@1a {
compatible = "wlf,wm8753";
reg = <0x1a>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
};
usb@c5000000 {
status = "okay";
nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
};
usb@c5008000 {
status = "okay";
nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
};
sdhci@c8000400 {
status = "okay";
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
};
sound {
compatible = "nvidia,tegra-audio-wm8753-whistler",
"nvidia,tegra-audio-wm8753";
nvidia,model = "NVIDIA Tegra Whistler";
nvidia,audio-routing =
"Headphone Jack", "LOUT1",
"Headphone Jack", "ROUT1",
"MIC2", "Mic Jack",
"MIC2N", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
};
};

2
arch/arm/mach-at91/Makefile.boot
View file

@ -15,7 +15,9 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263

16
arch/arm/mach-davinci/cp_intc.c
View file

@ -14,6 +14,9 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <mach/common.h>
#include <mach/cp_intc.h>
@ -119,7 +122,7 @@ static const struct irq_domain_ops cp_intc_host_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
int __init __cp_intc_init(struct device_node *node)
int __init cp_intc_of_init(struct device_node *node, struct device_node *parent)
{
u32 num_irq = davinci_soc_info.intc_irq_num;
u8 *irq_prio = davinci_soc_info.intc_irq_prios;
@ -128,7 +131,14 @@ int __init __cp_intc_init(struct device_node *node)
int i, irq_base;
davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC;
davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
if (node) {
davinci_intc_base = of_iomap(node, 0);
if (of_property_read_u32(node, "ti,intc-size", &num_irq))
pr_warn("unable to get intc-size, default to %d\n",
num_irq);
} else {
davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
}
if (WARN_ON(!davinci_intc_base))
return -EINVAL;
@ -208,5 +218,5 @@ int __init __cp_intc_init(struct device_node *node)
void __init cp_intc_init(void)
{
__cp_intc_init(NULL);
cp_intc_of_init(NULL, NULL);
}

1
arch/arm/mach-davinci/include/mach/cp_intc.h
View file

@ -52,5 +52,6 @@
#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2))
void __init cp_intc_init(void);
int __init cp_intc_of_init(struct device_node *, struct device_node *);
#endif /* __ASM_HARDWARE_CP_INTC_H */

73
arch/arm/mach-exynos/clock-exynos4.c
View file

@ -586,17 +586,17 @@ static struct clk exynos4_init_clocks_off[] = {
.ctrlbit = (1 << 13),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "exynos4210-spi.0",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "exynos4210-spi.1",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "s3c64xx-spi.2",
.devname = "exynos4210-spi.2",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 18),
}, {
@ -1242,42 +1242,69 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos4_clk_sclk_spi0 = {
static struct clksrc_clk exynos4_clk_mdout_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 16),
.name = "mdout_spi",
.devname = "exynos4210-spi.0",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos4_clk_sclk_spi1 = {
static struct clksrc_clk exynos4_clk_mdout_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 20),
.name = "mdout_spi",
.devname = "exynos4210-spi.1",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
};
static struct clksrc_clk exynos4_clk_sclk_spi2 = {
static struct clksrc_clk exynos4_clk_mdout_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.2",
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 24),
.name = "mdout_spi",
.devname = "exynos4210-spi.2",
},
.sources = &exynos4_clkset_group,
.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos4_clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.0",
.parent = &exynos4_clk_mdout_spi0.clk,
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
};
static struct clksrc_clk exynos4_clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.1",
.parent = &exynos4_clk_mdout_spi1.clk,
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 20),
},
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos4_clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.2",
.parent = &exynos4_clk_mdout_spi2.clk,
.enable = exynos4_clksrc_mask_peril1_ctrl,
.ctrlbit = (1 << 24),
},
.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
};
/* Clock initialization code */
static struct clksrc_clk *exynos4_sysclks[] = {
&exynos4_clk_mout_apll,
@ -1331,7 +1358,9 @@ static struct clksrc_clk *exynos4_clksrc_cdev[] = {
&exynos4_clk_sclk_spi0,
&exynos4_clk_sclk_spi1,
&exynos4_clk_sclk_spi2,
&exynos4_clk_mdout_spi0,
&exynos4_clk_mdout_spi1,
&exynos4_clk_mdout_spi2,
};
static struct clk_lookup exynos4_clk_lookup[] = {
@ -1347,9 +1376,9 @@ static struct clk_lookup exynos4_clk_lookup[] = {
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
};
static int xtal_rate;

95
arch/arm/mach-exynos/clock-exynos5.c
View file

@ -131,6 +131,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
}
static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
}
static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
@ -740,6 +745,24 @@ static struct clk exynos5_init_clocks_off[] = {
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 14),
}, {
.name = "spi",
.devname = "exynos4210-spi.0",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "spi",
.devname = "exynos4210-spi.1",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "exynos4210-spi.2",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 18),
}, {
.name = SYSMMU_CLOCK_NAME,
.devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
@ -1034,6 +1057,69 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos5_clk_mdout_spi0 = {
.clk = {
.name = "mdout_spi",
.devname = "exynos4210-spi.0",
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos5_clk_mdout_spi1 = {
.clk = {
.name = "mdout_spi",
.devname = "exynos4210-spi.1",
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
};
static struct clksrc_clk exynos5_clk_mdout_spi2 = {
.clk = {
.name = "mdout_spi",
.devname = "exynos4210-spi.2",
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos5_clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.0",
.parent = &exynos5_clk_mdout_spi0.clk,
.enable = exynos5_clksrc_mask_peric1_ctrl,
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
};
static struct clksrc_clk exynos5_clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.1",
.parent = &exynos5_clk_mdout_spi1.clk,
.enable = exynos5_clksrc_mask_peric1_ctrl,
.ctrlbit = (1 << 20),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
};
static struct clksrc_clk exynos5_clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "exynos4210-spi.2",
.parent = &exynos5_clk_mdout_spi2.clk,
.enable = exynos5_clksrc_mask_peric1_ctrl,
.ctrlbit = (1 << 24),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
};
static struct clksrc_clk exynos5_clksrcs[] = {
{
.clk = {
@ -1148,6 +1234,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_dout_mmc4,
&exynos5_clk_aclk_acp,
&exynos5_clk_pclk_acp,
&exynos5_clk_sclk_spi0,
&exynos5_clk_sclk_spi1,
&exynos5_clk_sclk_spi2,
&exynos5_clk_mdout_spi0,
&exynos5_clk_mdout_spi1,
&exynos5_clk_mdout_spi2,
};
static struct clk *exynos5_clk_cdev[] = {
@ -1176,6 +1268,9 @@ static struct clk_lookup exynos5_clk_lookup[] = {
CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),

4
arch/arm/mach-exynos/include/mach/irqs.h
View file

@ -195,6 +195,10 @@
#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
#define IRQ_SPI0 EXYNOS4_IRQ_SPI0
#define IRQ_SPI1 EXYNOS4_IRQ_SPI1
#define IRQ_SPI2 EXYNOS4_IRQ_SPI2
#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG

3
arch/arm/mach-exynos/include/mach/map.h
View file

@ -154,6 +154,9 @@
#define EXYNOS4_PA_SPI0 0x13920000
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
#define EXYNOS5_PA_SPI0 0x12D20000
#define EXYNOS5_PA_SPI1 0x12D30000
#define EXYNOS5_PA_SPI2 0x12D40000
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000

6
arch/arm/mach-exynos/mach-exynos4-dt.c
View file

@ -55,6 +55,12 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
"exynos4-sdhci.3", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
"exynos4210-spi.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
"exynos4210-spi.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
"exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
{},

6
arch/arm/mach-exynos/mach-exynos5-dt.c
View file

@ -47,6 +47,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
"exynos4210-spi.0", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
"exynos4210-spi.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
"exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),

33
arch/arm/mach-exynos/setup-spi.c
View file

@ -9,21 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.high_speed = 1,
.clk_from_cmu = true,
.tx_st_done = 25,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
@ -34,15 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.clk_from_cmu = true,
.tx_st_done = 25,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
@ -53,15 +34,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI2
struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.clk_from_cmu = true,
.tx_st_done = 25,
};
int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi2_cfg_gpio(void)
{
s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);

13
arch/arm/mach-imx/Kconfig
View file

@ -52,6 +52,7 @@ config SOC_IMX25
select ARCH_MX25
select COMMON_CLK
select CPU_ARM926T
select HAVE_CAN_FLEXCAN if CAN
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
@ -79,6 +80,7 @@ config SOC_IMX35
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
select HAVE_CAN_FLEXCAN if CAN
config SOC_IMX5
select CPU_V7
@ -105,6 +107,7 @@ config SOC_IMX53
select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
if ARCH_IMX_V4_V5
@ -556,6 +559,14 @@ config MACH_BUG
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX31_DT
bool "Support i.MX31 platforms from device tree"
select SOC_IMX31
select USE_OF
help
Include support for Freescale i.MX31 based platforms
using the device tree for discovery.
comment "MX35 platforms:"
config MACH_PCM043
@ -826,10 +837,12 @@ config SOC_IMX6Q
select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_ANATOP
select PINCTRL
select PINCTRL_IMX6Q
select USE_OF

1
arch/arm/mach-imx/Makefile
View file

@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o

19
arch/arm/mach-imx/clk-imx31.c
View file

@ -20,6 +20,7 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/mx31.h>
@ -179,3 +180,21 @@ int __init mx31_clocks_init(unsigned long fref)
return 0;
}
#ifdef CONFIG_OF
int __init mx31_clocks_init_dt(void)
{
struct device_node *np;
u32 fref = 26000000; /* default */
for_each_compatible_node(np, NULL, "fixed-clock") {
if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
continue;
if (!of_property_read_u32(np, "clock-frequency", &fref))
break;
}
return mx31_clocks_init(fref);
}
#endif

22
arch/arm/mach-imx/clk-imx6q.c
View file

@ -147,12 +147,12 @@ enum mx6q_clks {
esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
clk_max
};
@ -198,6 +198,9 @@ int __init mx6q_clocks_init(void)
clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
@ -318,7 +321,7 @@ int __init mx6q_clocks_init(void)
clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
/* name parent_name reg shift */
clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4);
clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
@ -357,6 +360,7 @@ int __init mx6q_clocks_init(void)
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
@ -391,6 +395,18 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[twd], NULL, "smp_twd");
clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");

63
arch/arm/mach-imx/imx31-dt.c Normal file
View file

@ -0,0 +1,63 @@
/*
* Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/mx31.h>
static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
"imx21-uart.0", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
"imx21-uart.1", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
"imx21-uart.2", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
"imx21-uart.3", NULL),
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
"imx21-uart.4", NULL),
{ /* sentinel */ }
};
static void __init imx31_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
imx31_auxdata_lookup, NULL);
}
static void __init imx31_timer_init(void)
{
mx31_clocks_init_dt();
}
static struct sys_timer imx31_timer = {
.init = imx31_timer_init,
};
static const char *imx31_dt_board_compat[] __initdata = {
"fsl,imx31",
NULL
};
DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.handle_irq = imx31_handle_irq,
.timer = &imx31_timer,
.init_machine = imx31_dt_init,
.dt_compat = imx31_dt_board_compat,
.restart = mxc_restart,
MACHINE_END

41
arch/arm/mach-imx/mach-imx6q.c
View file

@ -24,6 +24,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/anatop.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
@ -113,6 +114,45 @@ static void __init imx6q_sabrelite_init(void)
imx6q_sabrelite_cko1_setup();
}
static void __init imx6q_usb_init(void)
{
struct device_node *np;
struct platform_device *pdev = NULL;
struct anatop *adata = NULL;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
if (np)
pdev = of_find_device_by_node(np);
if (pdev)
adata = platform_get_drvdata(pdev);
if (!adata) {
if (np)
of_node_put(np);
return;
}
#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
/*
* The external charger detector needs to be disabled,
* or the signal at DP will be poor
*/
anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B
| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
~0);
anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT,
BM_ANADIG_USB_CHRG_DETECT_EN_B |
BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B,
~0);
of_node_put(np);
}
static void __init imx6q_init_machine(void)
{
/*
@ -127,6 +167,7 @@ static void __init imx6q_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6q_pm_init();
imx6q_usb_init();
}
static void __init imx6q_map_io(void)

1
arch/arm/mach-mxs/Kconfig
View file

@ -16,6 +16,7 @@ config SOC_IMX28
bool
select ARM_AMBA
select CPU_ARM926T
select HAVE_CAN_FLEXCAN if CAN
select HAVE_PWM
select PINCTRL_IMX28

9
arch/arm/mach-mxs/Makefile.boot
View file

@ -1 +1,10 @@
zreladdr-y += 0x40008000
dtb-y += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-tx28.dtb \

2
arch/arm/mach-mxs/devices-mx23.h
View file

@ -10,7 +10,7 @@
*/
#include <mach/mx23.h>
#include <mach/devices-common.h>
#include <mach/mxsfb.h>
#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx23_add_duart(void)

2
arch/arm/mach-mxs/devices-mx28.h
View file

@ -10,7 +10,7 @@
*/
#include <mach/mx28.h>
#include <mach/devices-common.h>
#include <mach/mxsfb.h>
#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx28_add_duart(void)

2
arch/arm/mach-mxs/devices/platform-mxsfb.c
View file

@ -10,7 +10,7 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#include <mach/mxsfb.h>
#include <linux/mxsfb.h>
#ifdef CONFIG_SOC_IMX23
struct platform_device *__init mx23_add_mxsfb(

217
arch/arm/mach-mxs/mach-mxs.c
View file

@ -16,12 +16,95 @@
#include <linux/init.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
#include <linux/micrel_phy.h>
#include <linux/mxsfb.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
static struct fb_videomode mx23evk_video_modes[] = {
{
.name = "Samsung-LMS430HF02",
.refresh = 60,
.xres = 480,
.yres = 272,
.pixclock = 108096, /* picosecond (9.2 MHz) */
.left_margin = 15,
.right_margin = 8,
.upper_margin = 12,
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
FB_SYNC_DOTCLK_FAILING_ACT,
},
};
static struct fb_videomode mx28evk_video_modes[] = {
{
.name = "Seiko-43WVF1G",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 29851, /* picosecond (33.5 MHz) */
.left_margin = 89,
.right_margin = 164,
.upper_margin = 23,
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
FB_SYNC_DOTCLK_FAILING_ACT,
},
};
static struct fb_videomode m28evk_video_modes[] = {
{
.name = "Ampire AM-800480R2TMQW-T01H",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 30066, /* picosecond (33.26 MHz) */
.left_margin = 0,
.right_margin = 256,
.upper_margin = 0,
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
},
};
static struct fb_videomode apx4devkit_video_modes[] = {
{
.name = "HannStar PJ70112A",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 33333, /* picosecond (30.00 MHz) */
.left_margin = 88,
.right_margin = 40,
.upper_margin = 32,
.lower_margin = 13,
.hsync_len = 48,
.vsync_len = 3,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
FB_SYNC_DATA_ENABLE_HIGH_ACT |
FB_SYNC_DOTCLK_FAILING_ACT,
},
};
static struct mxsfb_platform_data mxsfb_pdata __initdata;
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
{ /* sentinel */ }
};
static int __init mxs_icoll_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
@ -71,33 +154,155 @@ static struct sys_timer imx28_timer = {
.init = imx28_timer_init,
};
static void __init imx28_evk_init(void)
{
struct clk *clk;
enum mac_oui {
OUI_FSL,
OUI_DENX,
};
static void __init update_fec_mac_prop(enum mac_oui oui)
{
struct device_node *np, *from = NULL;
struct property *oldmac, *newmac;
const u32 *ocotp = mxs_get_ocotp();
u8 *macaddr;
u32 val;
int i;
for (i = 0; i < 2; i++) {
np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
if (!np)
return;
from = np;
newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
if (!newmac)
return;
newmac->value = newmac + 1;
newmac->length = 6;
newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
if (!newmac->name) {
kfree(newmac);
return;
}
/*
* OCOTP only stores the last 4 octets for each mac address,
* so hard-code OUI here.
*/
macaddr = newmac->value;
switch (oui) {
case OUI_FSL:
macaddr[0] = 0x00;
macaddr[1] = 0x04;
macaddr[2] = 0x9f;
break;
case OUI_DENX:
macaddr[0] = 0xc0;
macaddr[1] = 0xe5;
macaddr[2] = 0x4e;
break;
}
val = ocotp[i];
macaddr[3] = (val >> 16) & 0xff;
macaddr[4] = (val >> 8) & 0xff;
macaddr[5] = (val >> 0) & 0xff;
oldmac = of_find_property(np, newmac->name, NULL);
if (oldmac)
prom_update_property(np, newmac, oldmac);
else
prom_add_property(np, newmac);
}
}
static void __init imx23_evk_init(void)
{
mxsfb_pdata.mode_list = mx23evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
static inline void enable_clk_enet_out(void)
{
struct clk *clk = clk_get_sys("enet_out", NULL);
/* Enable fec phy clock */
clk = clk_get_sys("enet_out", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
}
static void __init imx28_evk_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_FSL);
mxsfb_pdata.mode_list = mx28evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
static void __init m28evk_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_DENX);
mxsfb_pdata.mode_list = m28evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
return 0;
}
static void __init apx4devkit_init(void)
{
enable_clk_enet_out();
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
mxsfb_pdata.mode_list = apx4devkit_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
else if (of_machine_is_compatible("fsl,imx23-evk"))
imx23_evk_init();
else if (of_machine_is_compatible("denx,m28evk"))
m28evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
of_platform_populate(NULL, of_default_bus_match_table,
NULL, NULL);
mxs_auxdata_lookup, NULL);
}
static const char *imx23_dt_compat[] __initdata = {
"fsl,imx23-evk",
"fsl,stmp378x_devb"
"olimex,imx23-olinuxino",
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
"bluegiga,apx4devkit",
"crystalfontz,cfa10036",
"denx,m28evk",
"fsl,imx28-evk",
"karo,tx28",
"fsl,imx28",
NULL,
};

2
arch/arm/mach-omap2/devices.c
View file

@ -772,7 +772,7 @@ static int __init omap_init_wdt(void)
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
if (!cpu_class_is_omap2())
if (!cpu_class_is_omap2() || of_have_populated_dt())
return 0;
oh = omap_hwmod_lookup(oh_name);

3
arch/arm/mach-s3c24xx/clock-s3c2416.c
View file

@ -144,7 +144,8 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
};
void __init s3c2416_init_clocks(int xtal)

2
arch/arm/mach-s3c24xx/clock-s3c2443.c
View file

@ -181,7 +181,7 @@ static struct clk *clks[] __initdata = {
static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
};
void __init s3c2443_init_clocks(int xtal)

4
arch/arm/mach-s3c24xx/common-s3c2443.c
View file

@ -559,7 +559,7 @@ static struct clk hsmmc1_clk = {
static struct clk hsspi_clk = {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s3c2443-spi.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_HSSPI,
@ -633,7 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,

10
arch/arm/mach-s3c24xx/setup-spi.c
View file

@ -13,20 +13,12 @@
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
.high_speed = 1,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
int s3c64xx_spi0_cfg_gpio(void)
{
/* enable hsspi bit in misccr */
s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);

20
arch/arm/mach-s3c64xx/clock.c
View file

@ -178,13 +178,13 @@ static struct clk init_clocks_off[] = {
.ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s3c6410-spi.0",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI0,
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s3c6410-spi.1",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI1,
@ -331,7 +331,7 @@ static struct clk init_clocks_off[] = {
static struct clk clk_48m_spi0 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.0",
.devname = "s3c6410-spi.0",
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
@ -339,7 +339,7 @@ static struct clk clk_48m_spi0 = {
static struct clk clk_48m_spi1 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.1",
.devname = "s3c6410-spi.1",
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
@ -802,7 +802,7 @@ static struct clksrc_clk clk_sclk_mmc2 = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "spi-bus",
.devname = "s3c64xx-spi.0",
.devname = "s3c6410-spi.0",
.ctrlbit = S3C_CLKCON_SCLK_SPI0,
.enable = s3c64xx_sclk_ctrl,
},
@ -814,7 +814,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "spi-bus",
.devname = "s3c64xx-spi.1",
.devname = "s3c6410-spi.1",
.ctrlbit = S3C_CLKCON_SCLK_SPI1,
.enable = s3c64xx_sclk_ctrl,
},
@ -858,10 +858,10 @@ static struct clk_lookup s3c64xx_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)

1
arch/arm/mach-s3c64xx/include/mach/dma.h
View file

@ -21,6 +21,7 @@
*/
enum dma_ch {
/* DMA0/SDMA0 */
DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,

2
arch/arm/mach-s3c64xx/mach-crag6410.c
View file

@ -799,7 +799,7 @@ static void __init crag6410_machine_init(void)
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
s3c64xx_spi0_set_platdata(NULL, 0, 1);
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));

19
arch/arm/mach-s3c64xx/setup-spi.c
View file

@ -9,19 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@ -30,13 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);

12
arch/arm/mach-s5p64x0/clock-s5p6440.c
View file

@ -227,13 +227,13 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
@ -467,7 +467,7 @@ static struct clksrc_clk clk_sclk_uclk = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.ctrlbit = (1 << 20),
.enable = s5p64x0_sclk_ctrl,
},
@ -479,7 +479,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.ctrlbit = (1 << 21),
.enable = s5p64x0_sclk_ctrl,
},
@ -519,8 +519,8 @@ static struct clk_lookup s5p6440_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),

12
arch/arm/mach-s5p64x0/clock-s5p6450.c
View file

@ -236,13 +236,13 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 17),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.parent = &clk_pclk_low.clk,
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 22),
@ -528,7 +528,7 @@ static struct clksrc_clk clk_sclk_uclk = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5p64x0-spi.0",
.ctrlbit = (1 << 20),
.enable = s5p64x0_sclk_ctrl,
},
@ -540,7 +540,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5p64x0-spi.1",
.ctrlbit = (1 << 21),
.enable = s5p64x0_sclk_ctrl,
},
@ -562,8 +562,8 @@ static struct clk_lookup s5p6450_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),

21
arch/arm/mach-s5p64x0/setup-spi.c
View file

@ -9,21 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
if (soc_is_s5p6450())
s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
@ -36,13 +25,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
if (soc_is_s5p6450())
s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,

30
arch/arm/mach-s5pc100/clock.c
View file

@ -564,19 +564,19 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 5),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pc100-spi.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pc100-spi.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "spi",
.devname = "s3c64xx-spi.2",
.devname = "s5pc100-spi.2",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 8),
@ -702,7 +702,7 @@ static struct clk clk_hsmmc0 = {
static struct clk clk_48m_spi0 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.0",
.devname = "s5pc100-spi.0",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 7),
@ -710,7 +710,7 @@ static struct clk clk_48m_spi0 = {
static struct clk clk_48m_spi1 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.1",
.devname = "s5pc100-spi.1",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 8),
@ -718,7 +718,7 @@ static struct clk clk_48m_spi1 = {
static struct clk clk_48m_spi2 = {
.name = "spi_48m",
.devname = "s3c64xx-spi.2",
.devname = "s5pc100-spi.2",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 9),
@ -1085,7 +1085,7 @@ static struct clksrc_clk clk_sclk_mmc2 = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pc100-spi.0",
.ctrlbit = (1 << 4),
.enable = s5pc100_sclk0_ctrl,
},
@ -1097,7 +1097,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pc100-spi.1",
.ctrlbit = (1 << 5),
.enable = s5pc100_sclk0_ctrl,
},
@ -1109,7 +1109,7 @@ static struct clksrc_clk clk_sclk_spi1 = {
static struct clksrc_clk clk_sclk_spi2 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.2",
.devname = "s5pc100-spi.2",
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
},
@ -1315,12 +1315,12 @@ static struct clk_lookup s5pc100_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
};
void __init s5pc100_register_clocks(void)

30
arch/arm/mach-s5pc100/setup-spi.c
View file

@ -9,20 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@ -31,14 +21,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
@ -47,14 +30,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI2
struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi2_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);

14
arch/arm/mach-s5pv210/clock.c
View file

@ -445,19 +445,19 @@ static struct clk init_clocks_off[] = {
.ctrlbit = (1 << 11),
}, {
.name = "spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pv210-spi.0",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<12),
}, {
.name = "spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pv210-spi.1",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<13),
}, {
.name = "spi",
.devname = "s3c64xx-spi.2",
.devname = "s5pv210-spi.2",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<14),
@ -1035,7 +1035,7 @@ static struct clksrc_clk clk_sclk_mmc3 = {
static struct clksrc_clk clk_sclk_spi0 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.devname = "s5pv210-spi.0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 16),
},
@ -1047,7 +1047,7 @@ static struct clksrc_clk clk_sclk_spi0 = {
static struct clksrc_clk clk_sclk_spi1 = {
.clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.1",
.devname = "s5pv210-spi.1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 17),
},
@ -1331,8 +1331,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
};
void __init s5pv210_register_clocks(void)

21
arch/arm/mach-s5pv210/setup-spi.c
View file

@ -9,20 +9,10 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.high_speed = 1,
.tx_st_done = 25,
};
int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi0_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
@ -33,14 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
#endif
#ifdef CONFIG_S3C64XX_DEV_SPI1
struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.tx_st_done = 25,
};
int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
int s3c64xx_spi1_cfg_gpio(void)
{
s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);

1
arch/arm/mach-tegra/Makefile.boot
View file

@ -7,4 +7,5 @@ dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb
dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb
dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb
dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb

1
arch/arm/mach-ux500/Kconfig
View file

@ -41,6 +41,7 @@ config MACH_HREFV60
config MACH_SNOWBALL
bool "U8500 Snowball platform"
select MACH_MOP500
select LEDS_GPIO
help
Include support for the snowball development platform.

4
arch/arm/mach-ux500/board-mop500-sdi.c
View file

@ -80,7 +80,7 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
};
#endif
static struct mmci_platform_data mop500_sdi0_data = {
struct mmci_platform_data mop500_sdi0_data = {
.ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
@ -227,7 +227,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
};
#endif
static struct mmci_platform_data mop500_sdi4_data = {
struct mmci_platform_data mop500_sdi4_data = {
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |

63
arch/arm/mach-ux500/board-mop500.c
View file

@ -58,7 +58,7 @@
static struct gpio_led snowball_led_array[] = {
{
.name = "user_led",
.default_trigger = "none",
.default_trigger = "heartbeat",
.gpio = 142,
},
};
@ -331,43 +331,12 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
},
};
#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \
static struct nmk_i2c_controller u8500_i2c##id##_data = { \
/* \
* slave data setup time, which is \
* 250 ns,100ns,10ns which is 14,6,2 \
* respectively for a 48 Mhz \
* i2c clock \
*/ \
.slsu = _slsu, \
/* Tx FIFO threshold */ \
.tft = _tft, \
/* Rx FIFO threshold */ \
.rft = _rft, \
/* std. mode operation */ \
.clk_freq = clk, \
/* Slave response timeout(ms) */\
.timeout = t_out, \
.sm = _sm, \
}
/*
* The board uses 4 i2c controllers, initialize all of
* them with slave data setup time of 250 ns,
* Tx & Rx FIFO threshold values as 8 and standard
* mode of operation
*/
U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
static void __init mop500_i2c_init(struct device *parent)
{
db8500_add_i2c0(parent, &u8500_i2c0_data);
db8500_add_i2c1(parent, &u8500_i2c1_data);
db8500_add_i2c2(parent, &u8500_i2c2_data);
db8500_add_i2c3(parent, &u8500_i2c3_data);
db8500_add_i2c0(parent, NULL);
db8500_add_i2c1(parent, NULL);
db8500_add_i2c2(parent, NULL);
db8500_add_i2c3(parent, NULL);
}
static struct gpio_keys_button mop500_gpio_keys[] = {
@ -776,6 +745,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
@ -786,6 +757,11 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
@ -820,8 +796,6 @@ static void __init u8500_init_machine(void)
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
snowball_platform_devs[i]->dev.parent = parent;
/* automatically probe child nodes of db8500 device */
of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
@ -840,18 +814,6 @@ static void __init u8500_init_machine(void)
mop500_uib_init();
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
/*
* Devices to be DT:ed:
* snowball_led_dev = todo
* snowball_key_dev = todo
* snowball_sbnet_dev = done
* ab8500_device = done
*/
platform_add_devices(snowball_of_platform_devs,
ARRAY_SIZE(snowball_of_platform_devs));
snowball_sdi_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
@ -873,7 +835,6 @@ static void __init u8500_init_machine(void)
mop500_uib_init();
}
mop500_i2c_init(parent);
/* This board has full regulator constraints */
regulator_has_full_constraints();

3
arch/arm/mach-ux500/board-mop500.h
View file

@ -9,6 +9,7 @@
/* For NOMADIK_NR_GPIO */
#include <mach/irqs.h>
#include <linux/amba/mmci.h>
/* Snowball specific GPIO assignments, this board has no GPIO expander */
#define SNOWBALL_ACCEL_INT1_GPIO 163
@ -78,6 +79,8 @@
struct device;
struct i2c_board_info;
extern struct mmci_platform_data mop500_sdi0_data;
extern struct mmci_platform_data mop500_sdi4_data;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);

4
arch/arm/mach-ux500/cpu-db8500.c
View file

@ -139,7 +139,6 @@ static struct platform_device *platform_devs[] __initdata = {
static struct platform_device *of_platform_devs[] __initdata = {
&u8500_dma40_device,
&db8500_pmu_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
@ -237,7 +236,6 @@ struct device * __init u8500_of_init_devices(void)
parent = db8500_soc_device_init();
db8500_add_rtc(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
platform_device_register_data(parent,
@ -249,7 +247,7 @@ struct device * __init u8500_of_init_devices(void)
/*
* Devices to be DT:ed:
* u8500_dma40_device = todo
* db8500_pmu_device = todo
* db8500_pmu_device = done
* db8500_prcmu_device = done
*/
platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));

Some files were not shown because too many files have changed in this diff Show more