phy: qcom: Add driver for QCOM IPQ806x SATA PHY
Add a PHY driver for uses with AHCI based SATA controller driver on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
parent
175f02ebdf
commit
4f6160d408
|
@ -191,4 +191,11 @@ config PHY_QCOM_APQ8064_SATA
|
|||
depends on OF
|
||||
select GENERIC_PHY
|
||||
|
||||
config PHY_QCOM_IPQ806X_SATA
|
||||
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
|
||||
depends on ARCH_QCOM
|
||||
depends on HAS_IOMEM
|
||||
depends on OF
|
||||
select GENERIC_PHY
|
||||
|
||||
endmenu
|
||||
|
|
|
@ -23,3 +23,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
|
|||
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
|
||||
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
|
||||
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
|
||||
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
|
||||
|
|
211
drivers/phy/phy-qcom-ipq806x-sata.c
Normal file
211
drivers/phy/phy-qcom-ipq806x-sata.c
Normal file
|
@ -0,0 +1,211 @@
|
|||
/*
|
||||
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/phy/phy.h>
|
||||
|
||||
struct qcom_ipq806x_sata_phy {
|
||||
void __iomem *mmio;
|
||||
struct clk *cfg_clk;
|
||||
struct device *dev;
|
||||
};
|
||||
|
||||
#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
|
||||
|
||||
#define SATA_PHY_P0_PARAM0 0x200
|
||||
#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12)
|
||||
#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12)
|
||||
#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6)
|
||||
#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6)
|
||||
#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0)
|
||||
#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0)
|
||||
|
||||
#define SATA_PHY_P0_PARAM1 0x204
|
||||
#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21)
|
||||
#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14)
|
||||
#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14)
|
||||
#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7)
|
||||
#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7)
|
||||
#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0)
|
||||
#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0)
|
||||
|
||||
#define SATA_PHY_P0_PARAM2 0x208
|
||||
#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18)
|
||||
#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18)
|
||||
|
||||
#define SATA_PHY_P0_PARAM3 0x20C
|
||||
#define SATA_PHY_SSC_EN 0x8
|
||||
#define SATA_PHY_P0_PARAM4 0x210
|
||||
#define SATA_PHY_REF_SSP_EN 0x2
|
||||
#define SATA_PHY_RESET 0x1
|
||||
|
||||
static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
|
||||
{
|
||||
struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
|
||||
u32 reg;
|
||||
|
||||
/* Setting SSC_EN to 1 */
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
|
||||
reg = reg | SATA_PHY_SSC_EN;
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
|
||||
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
|
||||
~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
|
||||
SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
|
||||
SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
|
||||
reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
|
||||
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
|
||||
~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
|
||||
SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
|
||||
SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
|
||||
reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
|
||||
SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
|
||||
SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
|
||||
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
|
||||
~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
|
||||
reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
|
||||
|
||||
/* Setting PHY_RESET to 1 */
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
reg = reg | SATA_PHY_RESET;
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
|
||||
/* Setting REF_SSP_EN to 1 */
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
|
||||
/* make sure all changes complete before we let the PHY out of reset */
|
||||
mb();
|
||||
|
||||
/* sleep for max. 50us more to combine processor wakeups */
|
||||
usleep_range(20, 20 + 50);
|
||||
|
||||
/* Clearing PHY_RESET to 0 */
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
reg = reg & ~SATA_PHY_RESET;
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
|
||||
{
|
||||
struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
|
||||
u32 reg;
|
||||
|
||||
/* Setting PHY_RESET to 1 */
|
||||
reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
reg = reg | SATA_PHY_RESET;
|
||||
writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct phy_ops qcom_ipq806x_sata_phy_ops = {
|
||||
.init = qcom_ipq806x_sata_phy_init,
|
||||
.exit = qcom_ipq806x_sata_phy_exit,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct qcom_ipq806x_sata_phy *phy;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *res;
|
||||
struct phy_provider *phy_provider;
|
||||
struct phy *generic_phy;
|
||||
int ret;
|
||||
|
||||
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||||
if (!phy)
|
||||
return -ENOMEM;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
phy->mmio = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(phy->mmio))
|
||||
return PTR_ERR(phy->mmio);
|
||||
|
||||
generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops,
|
||||
NULL);
|
||||
if (IS_ERR(generic_phy)) {
|
||||
dev_err(dev, "%s: failed to create phy\n", __func__);
|
||||
return PTR_ERR(generic_phy);
|
||||
}
|
||||
|
||||
phy->dev = dev;
|
||||
phy_set_drvdata(generic_phy, phy);
|
||||
platform_set_drvdata(pdev, phy);
|
||||
|
||||
phy->cfg_clk = devm_clk_get(dev, "cfg");
|
||||
if (IS_ERR(phy->cfg_clk)) {
|
||||
dev_err(dev, "Failed to get sata cfg clock\n");
|
||||
return PTR_ERR(phy->cfg_clk);
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(phy->cfg_clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||||
if (IS_ERR(phy_provider)) {
|
||||
clk_disable_unprepare(phy->cfg_clk);
|
||||
dev_err(dev, "%s: failed to register phy\n", __func__);
|
||||
return PTR_ERR(phy_provider);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
|
||||
|
||||
clk_disable_unprepare(phy->cfg_clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
|
||||
{ .compatible = "qcom,ipq806x-sata-phy" },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
|
||||
|
||||
static struct platform_driver qcom_ipq806x_sata_phy_driver = {
|
||||
.probe = qcom_ipq806x_sata_phy_probe,
|
||||
.remove = qcom_ipq806x_sata_phy_remove,
|
||||
.driver = {
|
||||
.name = "qcom-ipq806x-sata-phy",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = qcom_ipq806x_sata_phy_of_match,
|
||||
}
|
||||
};
|
||||
module_platform_driver(qcom_ipq806x_sata_phy_driver);
|
||||
|
||||
MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in a new issue