phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver
This patch adds support for Broadcom NS2 SATA3 PHY in existing Broadcom SATA3 PHY driver. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Anup Patel
Kishon Vijay Abraham I
parent
037c418945
commit
4faee9a43d
|
|
@ -403,15 +403,6 @@ config PHY_TUSB1210
|
|||
help
|
||||
Support for TI TUSB1210 USB ULPI PHY.
|
||||
|
||||
config PHY_CYGNUS_PCIE
|
||||
tristate "Broadcom Cygnus PCIe PHY driver"
|
||||
depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
|
||||
select GENERIC_PHY
|
||||
default ARCH_BCM_CYGNUS
|
||||
help
|
||||
Enable this to support the Broadcom Cygnus PCIe PHY.
|
||||
If unsure, say N.
|
||||
|
||||
config PHY_BRCM_SATA
|
||||
tristate "Broadcom SATA PHY driver"
|
||||
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
|
||||
|
|
@ -421,4 +412,14 @@ config PHY_BRCM_SATA
|
|||
help
|
||||
Enable this to support the Broadcom SATA PHY.
|
||||
If unsure, say N.
|
||||
|
||||
config PHY_CYGNUS_PCIE
|
||||
tristate "Broadcom Cygnus PCIe PHY driver"
|
||||
depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
|
||||
select GENERIC_PHY
|
||||
default ARCH_BCM_CYGNUS
|
||||
help
|
||||
Enable this to support the Broadcom Cygnus PCIe PHY.
|
||||
If unsure, say N.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -49,6 +49,6 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
|
|||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
|
||||
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
|
||||
obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
|
||||
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
|
||||
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
|
||||
obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@
|
|||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
|
@ -24,22 +25,26 @@
|
|||
#include <linux/phy/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define SATA_MDIO_BANK_OFFSET 0x23c
|
||||
#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4)
|
||||
#define SATA_PCB_BANK_OFFSET 0x23c
|
||||
#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4)
|
||||
|
||||
#define MAX_PORTS 2
|
||||
|
||||
/* Register offset between PHYs in PCB space */
|
||||
#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
|
||||
#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000
|
||||
|
||||
/* The older SATA PHY registers duplicated per port registers within the map,
|
||||
* rather than having a separate map per port.
|
||||
*/
|
||||
#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10
|
||||
#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10
|
||||
|
||||
/* Register offset between PHYs in PHY control space */
|
||||
#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8
|
||||
|
||||
enum brcm_sata_phy_version {
|
||||
BRCM_SATA_PHY_28NM,
|
||||
BRCM_SATA_PHY_40NM,
|
||||
BRCM_SATA_PHY_STB_28NM,
|
||||
BRCM_SATA_PHY_STB_40NM,
|
||||
BRCM_SATA_PHY_IPROC_NS2,
|
||||
};
|
||||
|
||||
struct brcm_sata_port {
|
||||
|
|
@ -52,15 +57,48 @@ struct brcm_sata_port {
|
|||
struct brcm_sata_phy {
|
||||
struct device *dev;
|
||||
void __iomem *phy_base;
|
||||
void __iomem *ctrl_base;
|
||||
enum brcm_sata_phy_version version;
|
||||
|
||||
struct brcm_sata_port phys[MAX_PORTS];
|
||||
};
|
||||
|
||||
enum sata_mdio_phy_regs {
|
||||
PLL_REG_BANK_0 = 0x50,
|
||||
enum sata_phy_regs {
|
||||
BLOCK0_REG_BANK = 0x000,
|
||||
BLOCK0_XGXSSTATUS = 0x81,
|
||||
BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12),
|
||||
BLOCK0_SPARE = 0x8d,
|
||||
BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3,
|
||||
BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1,
|
||||
|
||||
PLL_REG_BANK_0 = 0x050,
|
||||
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
|
||||
|
||||
PLL1_REG_BANK = 0x060,
|
||||
PLL1_ACTRL2 = 0x82,
|
||||
PLL1_ACTRL3 = 0x83,
|
||||
PLL1_ACTRL4 = 0x84,
|
||||
|
||||
OOB_REG_BANK = 0x150,
|
||||
OOB_CTRL1 = 0x80,
|
||||
OOB_CTRL1_BURST_MAX_MASK = 0xf,
|
||||
OOB_CTRL1_BURST_MAX_SHIFT = 12,
|
||||
OOB_CTRL1_BURST_MIN_MASK = 0xf,
|
||||
OOB_CTRL1_BURST_MIN_SHIFT = 8,
|
||||
OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf,
|
||||
OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4,
|
||||
OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf,
|
||||
OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0,
|
||||
OOB_CTRL2 = 0x81,
|
||||
OOB_CTRL2_SEL_ENA_SHIFT = 15,
|
||||
OOB_CTRL2_SEL_ENA_RC_SHIFT = 14,
|
||||
OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f,
|
||||
OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8,
|
||||
OOB_CTRL2_BURST_CNT_MASK = 0x3,
|
||||
OOB_CTRL2_BURST_CNT_SHIFT = 6,
|
||||
OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f,
|
||||
OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0,
|
||||
|
||||
TXPMD_REG_BANK = 0x1a0,
|
||||
TXPMD_CONTROL1 = 0x81,
|
||||
TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
|
||||
|
|
@ -72,69 +110,183 @@ enum sata_mdio_phy_regs {
|
|||
TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
|
||||
};
|
||||
|
||||
static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
|
||||
enum sata_phy_ctrl_regs {
|
||||
PHY_CTRL_1 = 0x0,
|
||||
PHY_CTRL_1_RESET = BIT(0),
|
||||
};
|
||||
|
||||
static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
|
||||
{
|
||||
struct brcm_sata_phy *priv = port->phy_priv;
|
||||
u32 offset = 0;
|
||||
u32 size = 0;
|
||||
|
||||
if (priv->version == BRCM_SATA_PHY_28NM)
|
||||
offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
|
||||
else if (priv->version == BRCM_SATA_PHY_40NM)
|
||||
offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
|
||||
else
|
||||
switch (priv->version) {
|
||||
case BRCM_SATA_PHY_STB_28NM:
|
||||
case BRCM_SATA_PHY_IPROC_NS2:
|
||||
size = SATA_PCB_REG_28NM_SPACE_SIZE;
|
||||
break;
|
||||
case BRCM_SATA_PHY_STB_40NM:
|
||||
size = SATA_PCB_REG_40NM_SPACE_SIZE;
|
||||
break;
|
||||
default:
|
||||
dev_err(priv->dev, "invalid phy version\n");
|
||||
break;
|
||||
};
|
||||
|
||||
return priv->phy_base + (port->portnum * offset);
|
||||
return priv->phy_base + (port->portnum * size);
|
||||
}
|
||||
|
||||
static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
|
||||
u32 msk, u32 value)
|
||||
static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
|
||||
{
|
||||
struct brcm_sata_phy *priv = port->phy_priv;
|
||||
u32 size = 0;
|
||||
|
||||
switch (priv->version) {
|
||||
case BRCM_SATA_PHY_IPROC_NS2:
|
||||
size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
|
||||
break;
|
||||
default:
|
||||
dev_err(priv->dev, "invalid phy version\n");
|
||||
break;
|
||||
};
|
||||
|
||||
return priv->ctrl_base + (port->portnum * size);
|
||||
}
|
||||
|
||||
static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
|
||||
u32 ofs, u32 msk, u32 value)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
writel(bank, addr + SATA_MDIO_BANK_OFFSET);
|
||||
tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
|
||||
writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
|
||||
tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
|
||||
tmp = (tmp & msk) | value;
|
||||
writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
|
||||
writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
|
||||
}
|
||||
|
||||
static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
|
||||
{
|
||||
writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
|
||||
return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
|
||||
}
|
||||
|
||||
/* These defaults were characterized by H/W group */
|
||||
#define FMIN_VAL_DEFAULT 0x3df
|
||||
#define FMAX_VAL_DEFAULT 0x3df
|
||||
#define FMAX_VAL_SSC 0x83
|
||||
#define STB_FMIN_VAL_DEFAULT 0x3df
|
||||
#define STB_FMAX_VAL_DEFAULT 0x3df
|
||||
#define STB_FMAX_VAL_SSC 0x83
|
||||
|
||||
static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
|
||||
static int brcm_stb_sata_init(struct brcm_sata_port *port)
|
||||
{
|
||||
void __iomem *base = brcm_sata_phy_base(port);
|
||||
void __iomem *base = brcm_sata_pcb_base(port);
|
||||
struct brcm_sata_phy *priv = port->phy_priv;
|
||||
u32 tmp;
|
||||
|
||||
/* override the TX spread spectrum setting */
|
||||
tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
|
||||
brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
|
||||
brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
|
||||
|
||||
/* set fixed min freq */
|
||||
brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
|
||||
~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
|
||||
FMIN_VAL_DEFAULT);
|
||||
brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
|
||||
~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
|
||||
STB_FMIN_VAL_DEFAULT);
|
||||
|
||||
/* set fixed max freq depending on SSC config */
|
||||
if (port->ssc_en) {
|
||||
dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
|
||||
tmp = FMAX_VAL_SSC;
|
||||
dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
|
||||
tmp = STB_FMAX_VAL_SSC;
|
||||
} else {
|
||||
tmp = FMAX_VAL_DEFAULT;
|
||||
tmp = STB_FMAX_VAL_DEFAULT;
|
||||
}
|
||||
|
||||
brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
|
||||
brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
|
||||
~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* NS2 SATA PLL1 defaults were characterized by H/W group */
|
||||
#define NS2_PLL1_ACTRL2_MAGIC 0x1df8
|
||||
#define NS2_PLL1_ACTRL3_MAGIC 0x2b00
|
||||
#define NS2_PLL1_ACTRL4_MAGIC 0x8824
|
||||
|
||||
static int brcm_ns2_sata_init(struct brcm_sata_port *port)
|
||||
{
|
||||
int try;
|
||||
unsigned int val;
|
||||
void __iomem *base = brcm_sata_pcb_base(port);
|
||||
void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
|
||||
struct device *dev = port->phy_priv->dev;
|
||||
|
||||
/* Configure OOB control */
|
||||
val = 0x0;
|
||||
val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
|
||||
val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
|
||||
val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
|
||||
val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
|
||||
brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
|
||||
val = 0x0;
|
||||
val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
|
||||
val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
|
||||
val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
|
||||
brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
|
||||
|
||||
/* Configure PHY PLL register bank 1 */
|
||||
val = NS2_PLL1_ACTRL2_MAGIC;
|
||||
brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
|
||||
val = NS2_PLL1_ACTRL3_MAGIC;
|
||||
brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
|
||||
val = NS2_PLL1_ACTRL4_MAGIC;
|
||||
brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
|
||||
|
||||
/* Configure PHY BLOCK0 register bank */
|
||||
/* Set oob_clk_sel to refclk/2 */
|
||||
brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
|
||||
~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
|
||||
BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);
|
||||
|
||||
/* Strobe PHY reset using PHY control register */
|
||||
writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
|
||||
mdelay(1);
|
||||
writel(0x0, ctrl_base + PHY_CTRL_1);
|
||||
mdelay(1);
|
||||
|
||||
/* Wait for PHY PLL lock by polling pll_lock bit */
|
||||
try = 50;
|
||||
while (try) {
|
||||
val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
|
||||
BLOCK0_XGXSSTATUS);
|
||||
if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
|
||||
break;
|
||||
msleep(20);
|
||||
try--;
|
||||
}
|
||||
if (!try) {
|
||||
/* PLL did not lock; give up */
|
||||
dev_err(dev, "port%d PLL did not lock\n", port->portnum);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
dev_dbg(dev, "port%d initialized\n", port->portnum);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int brcm_sata_phy_init(struct phy *phy)
|
||||
{
|
||||
int rc;
|
||||
struct brcm_sata_port *port = phy_get_drvdata(phy);
|
||||
|
||||
brcm_sata_cfg_ssc(port);
|
||||
switch (port->phy_priv->version) {
|
||||
case BRCM_SATA_PHY_STB_28NM:
|
||||
case BRCM_SATA_PHY_STB_40NM:
|
||||
rc = brcm_stb_sata_init(port);
|
||||
break;
|
||||
case BRCM_SATA_PHY_IPROC_NS2:
|
||||
rc = brcm_ns2_sata_init(port);
|
||||
break;
|
||||
default:
|
||||
rc = -ENODEV;
|
||||
};
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -146,9 +298,11 @@ static const struct phy_ops phy_ops = {
|
|||
|
||||
static const struct of_device_id brcm_sata_phy_of_match[] = {
|
||||
{ .compatible = "brcm,bcm7445-sata-phy",
|
||||
.data = (void *)BRCM_SATA_PHY_28NM },
|
||||
.data = (void *)BRCM_SATA_PHY_STB_28NM },
|
||||
{ .compatible = "brcm,bcm7425-sata-phy",
|
||||
.data = (void *)BRCM_SATA_PHY_40NM },
|
||||
.data = (void *)BRCM_SATA_PHY_STB_40NM },
|
||||
{ .compatible = "brcm,iproc-ns2-sata-phy",
|
||||
.data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
|
||||
|
|
@ -181,7 +335,15 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
|
|||
if (of_id)
|
||||
priv->version = (enum brcm_sata_phy_version)of_id->data;
|
||||
else
|
||||
priv->version = BRCM_SATA_PHY_28NM;
|
||||
priv->version = BRCM_SATA_PHY_STB_28NM;
|
||||
|
||||
if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
||||
"phy-ctrl");
|
||||
priv->ctrl_base = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(priv->ctrl_base))
|
||||
return PTR_ERR(priv->ctrl_base);
|
||||
}
|
||||
|
||||
for_each_available_child_of_node(dn, child) {
|
||||
unsigned int id;
|
||||
|
|
|
|||
Loading…
Reference in a new issue