V4L/DVB (3218): Whitespace cleanups

- minor whitespace cleanups

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
This commit is contained in:
Michael Krufky 2006-01-09 15:25:34 -02:00 committed by Mauro Carvalho Chehab
parent 41d70c26c6
commit 50c25fff53
34 changed files with 124 additions and 129 deletions

View file

@ -243,7 +243,7 @@ sub nxt2002 {
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
checkstandard();
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
verify("$tmpdir/SkyNETU.sys", $hash);

View file

@ -332,6 +332,7 @@ static int fops_mmap(struct file *file, struct vm_area_struct * vma)
BUG();
return 0;
}
return videobuf_mmap_mapper(q,vma);
}

View file

@ -500,9 +500,9 @@ static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff
}
struct saa7146_use_ops saa7146_vbi_uops = {
.init = vbi_init,
.open = vbi_open,
.init = vbi_init,
.open = vbi_open,
.release = vbi_close,
.irq_done = vbi_irq_done,
.read = vbi_read,
.read = vbi_read,
};

View file

@ -151,8 +151,8 @@ static int try_win(struct saa7146_dev *dev, struct v4l2_window *win)
if (V4L2_FIELD_ANY == field) {
field = (win->w.height > maxh/2)
? V4L2_FIELD_INTERLACED
: V4L2_FIELD_TOP;
? V4L2_FIELD_INTERLACED
: V4L2_FIELD_TOP;
}
switch (field) {
case V4L2_FIELD_TOP:
@ -1114,10 +1114,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
return 0;
}
case VIDIOC_OVERLAY:
{
int on = *(int *)arg;
int err = 0;
@ -1359,7 +1355,6 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
saa7146_buffer_queue(fh->dev,&vv->video_q,buf);
}
static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
{
struct file *file = q->priv_data;

View file

@ -298,7 +298,7 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir
}
static int lgdt3303_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
struct dvb_frontend_parameters* params)
{
struct flexcop_device *fc = fe->dvb->priv;
u8 buf[4];

View file

@ -283,16 +283,17 @@ static int handle_dst_tag(struct dst_state *state, struct ca_msg *p_ca_message,
hw_buffer->msg[4] = 0x03;
hw_buffer->msg[5] = length & 0xff;
hw_buffer->msg[6] = 0x00;
/*
* Need to compute length for EN50221 section 8.3.2, for the time being
* assuming 8.3.2 is not applicable
*/
memcpy(&hw_buffer->msg[7], &p_ca_message->msg[4], length);
}
return 0;
}
static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 length, u8 reply)
{
if ((dst_put_ci(state, hw_buffer->msg, length, hw_buffer->msg, reply)) < 0) {

View file

@ -21,35 +21,35 @@ config DVB_CINERGYT2_TUNING
config DVB_CINERGYT2_STREAM_URB_COUNT
int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
depends on DVB_CINERGYT2_TUNING
default "32"
default "32"
help
USB Request Blocks for Highspeed Stream transfers are scheduled in
a queue for the Host Controller.
Usually the default value is a safe choice.
You may increase this number if you are using this device in a
Server Environment with many high-traffic USB Highspeed devices
You may increase this number if you are using this device in a
Server Environment with many high-traffic USB Highspeed devices
sharing the same USB bus.
config DVB_CINERGYT2_STREAM_BUF_SIZE
int "Size of URB Stream Buffers for Highspeed Transfers"
depends on DVB_CINERGYT2_TUNING
default "512"
default "512"
help
Should be a multiple of native buffer size of 512 bytes.
Default value is a safe choice.
You may increase this number if you are using this device in a
Server Environment with many high-traffic USB Highspeed devices
You may increase this number if you are using this device in a
Server Environment with many high-traffic USB Highspeed devices
sharing the same USB bus.
config DVB_CINERGYT2_QUERY_INTERVAL
int "Status update interval [milliseconds]"
depends on DVB_CINERGYT2_TUNING
default "250"
default "250"
help
This is the interval for status readouts from the demodulator.
You may try lower values if you need more responsive signal quality
@ -64,9 +64,9 @@ config DVB_CINERGYT2_QUERY_INTERVAL
config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
bool "Register the onboard IR Remote Control Receiver as Input Device"
depends on DVB_CINERGYT2_TUNING
default "yes"
default "yes"
help
Enable this option if you want to use the onboard Infrared Remote
Enable this option if you want to use the onboard Infrared Remote
Control Receiver as Linux-Input device.
Right now only the keycode table for the default Remote Control
@ -77,7 +77,7 @@ config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
config DVB_CINERGYT2_RC_QUERY_INTERVAL
int "Infrared Remote Controller update interval [milliseconds]"
depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
default "50"
default "50"
help
If you have a very fast-repeating remote control you can try lower
values, for normal consumer receivers the default value should be

View file

@ -5,7 +5,7 @@ config DVB_CORE
help
DVB core utility functions for device handling, software fallbacks etc.
Say Y when you have a DVB card and want to use it. Say Y if your want
to build your drivers outside the kernel, but need the DVB core. All
to build your drivers outside the kernel, but need the DVB core. All
in-kernel drivers will select this automatically if needed.
If unsure say N.

View file

@ -3,7 +3,7 @@
#
dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
dvb_ca_en50221.o dvb_frontend.o \
dvb_ca_en50221.o dvb_frontend.o \
dvb_net.o dvb_ringbuffer.o
obj-$(CONFIG_DVB_CORE) += dvb-core.o

View file

@ -409,16 +409,16 @@ static u8 *skip_pes_header(u8 **bufp)
if ((inbuf[6] & 0xc0) == 0x80){ /* mpeg2 */
if (buf[7] & PTS_ONLY)
pts = buf+9;
pts = buf+9;
else pts = NULL;
buf = inbuf + 9 + inbuf[8];
} else { /* mpeg1 */
for (buf = inbuf + 6; *buf == 0xff; buf++)
if (buf == inbuf + 6 + 16) {
break;
}
if (buf == inbuf + 6 + 16) {
break;
}
if ((*buf & 0xc0) == 0x40)
buf += 2;
buf += 2;
skip = mpeg1_skip_table [*buf >> 4];
if (skip == 5 || skip == 10) pts = buf;
else pts = NULL;
@ -529,9 +529,9 @@ static void init_mpg_picture( struct mpg_picture *pic, int chan, int32_t field_t
pic->picture_header = 0;
pic->sequence_header_data
= ( INIT_HORIZONTAL_SIZE << 20 )
| ( INIT_VERTICAL_SIZE << 8 )
| ( INIT_ASPECT_RATIO << 4 )
| ( INIT_FRAME_RATE );
| ( INIT_VERTICAL_SIZE << 8 )
| ( INIT_ASPECT_RATIO << 4 )
| ( INIT_FRAME_RATE );
pic->mpeg1_flag = 0;
pic->vinfo.horizontal_size
= INIT_DISP_HORIZONTAL_SIZE;

View file

@ -112,10 +112,10 @@ ssize_t dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, u8 *buf, size_t len, in
split = (rbuf->pread + len > rbuf->size) ? rbuf->size - rbuf->pread : 0;
if (split > 0) {
if (!usermem)
memcpy(buf, rbuf->data+rbuf->pread, split);
memcpy(buf, rbuf->data+rbuf->pread, split);
else
if (copy_to_user(buf, rbuf->data+rbuf->pread, split))
return -EFAULT;
if (copy_to_user(buf, rbuf->data+rbuf->pread, split))
return -EFAULT;
buf += split;
todo -= split;
rbuf->pread = 0;
@ -124,7 +124,7 @@ ssize_t dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, u8 *buf, size_t len, in
memcpy(buf, rbuf->data+rbuf->pread, todo);
else
if (copy_to_user(buf, rbuf->data+rbuf->pread, todo))
return -EFAULT;
return -EFAULT;
rbuf->pread = (rbuf->pread + todo) % rbuf->size;
@ -167,7 +167,7 @@ ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf, size_t le
}
ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
int offset, u8* buf, size_t len, int usermem)
int offset, u8* buf, size_t len, int usermem)
{
size_t todo;
size_t split;
@ -183,10 +183,10 @@ ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
split = ((idx + len) > rbuf->size) ? rbuf->size - idx : 0;
if (split > 0) {
if (!usermem)
memcpy(buf, rbuf->data+idx, split);
memcpy(buf, rbuf->data+idx, split);
else
if (copy_to_user(buf, rbuf->data+idx, split))
return -EFAULT;
if (copy_to_user(buf, rbuf->data+idx, split))
return -EFAULT;
buf += split;
todo -= split;
idx = 0;
@ -195,7 +195,7 @@ ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
memcpy(buf, rbuf->data+idx, todo);
else
if (copy_to_user(buf, rbuf->data+idx, todo))
return -EFAULT;
return -EFAULT;
return len;
}
@ -209,12 +209,12 @@ void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx)
// clean up disposed packets
while(dvb_ringbuffer_avail(rbuf) > DVB_RINGBUFFER_PKTHDRSIZE) {
if (DVB_RINGBUFFER_PEEK(rbuf, 2) == PKT_DISPOSED) {
pktlen = DVB_RINGBUFFER_PEEK(rbuf, 0) << 8;
pktlen |= DVB_RINGBUFFER_PEEK(rbuf, 1);
DVB_RINGBUFFER_SKIP(rbuf, pktlen + DVB_RINGBUFFER_PKTHDRSIZE);
pktlen = DVB_RINGBUFFER_PEEK(rbuf, 0) << 8;
pktlen |= DVB_RINGBUFFER_PEEK(rbuf, 1);
DVB_RINGBUFFER_SKIP(rbuf, pktlen + DVB_RINGBUFFER_PKTHDRSIZE);
} else {
// first packet is not disposed, so we stop cleaning now
break;
// first packet is not disposed, so we stop cleaning now
break;
}
}
}
@ -242,8 +242,8 @@ ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, size_t idx, size_t*
curpktstatus = rbuf->data[(idx + 2) % rbuf->size];
if (curpktstatus == PKT_READY) {
*pktlen = curpktlen;
return idx;
*pktlen = curpktlen;
return idx;
}
consumed += curpktlen + DVB_RINGBUFFER_PKTHDRSIZE;

View file

@ -106,7 +106,7 @@ extern void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf);
** returns number of bytes transferred or -EFAULT
*/
extern ssize_t dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, u8 *buf,
size_t len, int usermem);
size_t len, int usermem);
/* write routines & macros */
@ -121,7 +121,7 @@ extern ssize_t dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, u8 *buf,
** returns number of bytes transferred or -EFAULT
*/
extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf,
size_t len);
size_t len);
/**
@ -133,7 +133,7 @@ extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf,
* returns Number of bytes written, or -EFAULT, -ENOMEM, -EVINAL.
*/
extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf,
size_t len);
size_t len);
/**
* Read from a packet in the ringbuffer. Note: unlike dvb_ringbuffer_read(), this
@ -149,7 +149,7 @@ extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8* buf,
* returns Number of bytes read, or -EFAULT.
*/
extern ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx,
int offset, u8* buf, size_t len, int usermem);
int offset, u8* buf, size_t len, int usermem);
/**
* Dispose of a packet in the ring buffer.

View file

@ -92,10 +92,10 @@ static int dvb_device_open(struct inode *inode, struct file *file)
old_fops = file->f_op;
file->f_op = fops_get(dvbdev->fops);
if(file->f_op->open)
err = file->f_op->open(inode,file);
err = file->f_op->open(inode,file);
if (err) {
fops_put(file->f_op);
file->f_op = fops_get(old_fops);
fops_put(file->f_op);
file->f_op = fops_get(old_fops);
}
fops_put(old_fops);
return err;
@ -356,18 +356,18 @@ int dvb_usercopy(struct inode *inode, struct file *file,
case _IOC_WRITE:
case (_IOC_WRITE | _IOC_READ):
if (_IOC_SIZE(cmd) <= sizeof(sbuf)) {
parg = sbuf;
parg = sbuf;
} else {
/* too big to allocate from stack */
mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
if (NULL == mbuf)
return -ENOMEM;
parg = mbuf;
/* too big to allocate from stack */
mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
if (NULL == mbuf)
return -ENOMEM;
parg = mbuf;
}
err = -EFAULT;
if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd)))
goto out;
goto out;
break;
}
@ -384,7 +384,7 @@ int dvb_usercopy(struct inode *inode, struct file *file,
case _IOC_READ:
case (_IOC_WRITE | _IOC_READ):
if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd)))
err = -EFAULT;
err = -EFAULT;
break;
}

View file

@ -97,7 +97,7 @@ we simply define out own dvb_usercopy(), which will hopefully become
generic_usercopy() someday... */
extern int dvb_usercopy(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg,
unsigned int cmd, unsigned long arg,
int (*func)(struct inode *inode, struct file *file,
unsigned int cmd, void *arg));

View file

@ -190,7 +190,7 @@ static int vp702x_fe_get_frontend(struct dvb_frontend* fe,
}
static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
struct dvb_diseqc_master_cmd *m)
{
struct vp702x_fe_state *st = fe->demodulator_priv;
u8 cmd[8],ibuf[10];

View file

@ -56,18 +56,18 @@ comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
config DVB_SP8870
tristate "Spase sp8870 based"
tristate "Spase sp8870 based"
depends on DVB_CORE
select FW_LOADER
help
A DVB-T tuner module. Say Y when you want to support this frontend.
A DVB-T tuner module. Say Y when you want to support this frontend.
This driver needs external firmware. Please use the command
"<kerneldir>/Documentation/dvb/get_dvb_firmware sp8870" to
download/extract it, and then copy it to /usr/lib/hotplug/firmware.
config DVB_SP887X
tristate "Spase sp887x based"
tristate "Spase sp887x based"
depends on DVB_CORE
select FW_LOADER
help
@ -84,10 +84,10 @@ config DVB_CX22700
A DVB-T tuner module. Say Y when you want to support this frontend.
config DVB_CX22702
tristate "Conexant cx22702 demodulator (OFDM)"
depends on DVB_CORE
help
A DVB-T tuner module. Say Y when you want to support this frontend.
tristate "Conexant cx22702 demodulator (OFDM)"
depends on DVB_CORE
help
A DVB-T tuner module. Say Y when you want to support this frontend.
config DVB_L64781
tristate "LSI L64781"
@ -104,7 +104,7 @@ config DVB_TDA1004X
This driver needs external firmware. Please use the commands
"<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
"<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
"<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
download/extract them, and then copy them to /usr/lib/hotplug/firmware.
config DVB_NXT6000
@ -146,13 +146,13 @@ config DVB_VES1820
tristate "VLSI VES1820 based"
depends on DVB_CORE
help
A DVB-C tuner module. Say Y when you want to support this frontend.
A DVB-C tuner module. Say Y when you want to support this frontend.
config DVB_TDA10021
tristate "Philips TDA10021 based"
depends on DVB_CORE
help
A DVB-C tuner module. Say Y when you want to support this frontend.
A DVB-C tuner module. Say Y when you want to support this frontend.
config DVB_STV0297
tristate "ST STV0297 based"

View file

@ -55,7 +55,7 @@ static int debug;
static struct {u8 reg; u8 data;} cx24110_regdata[]=
/* Comments beginning with @ denote this value should
be the default */
be the default */
{{0x09,0x01}, /* SoftResetAll */
{0x09,0x00}, /* release reset */
{0x01,0xe8}, /* MSB of code rate 27.5MS/s */
@ -66,26 +66,26 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]=
{0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
{0x0a,0x00}, /* @ partial chip disables, do not set */
{0x0b,0x01}, /* set output clock in gapped mode, start signal low
active for first byte */
active for first byte */
{0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
{0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
{0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
to avoid starting the BER counter. Reset the
CRC test bit. Finite counting selected */
to avoid starting the BER counter. Reset the
CRC test bit. Finite counting selected */
{0x15,0xff}, /* @ size of the limited time window for RS BER
estimation. It is <value>*256 RS blocks, this
gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
estimation. It is <value>*256 RS blocks, this
gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
{0x16,0x00}, /* @ enable all RS output ports */
{0x17,0x04}, /* @ time window allowed for the RS to sync */
{0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
for automatically */
for automatically */
/* leave the current code rate and normalization
registers as they are after reset... */
registers as they are after reset... */
{0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
only once */
only once */
{0x23,0x18}, /* @ size of the limited time window for Viterbi BER
estimation. It is <value>*65536 channel bits, i.e.
approx. 38ms at 27.5MS/s, rate 3/4 */
estimation. It is <value>*65536 channel bits, i.e.
approx. 38ms at 27.5MS/s, rate 3/4 */
{0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
/* leave front-end AGC parameters at default values */
/* leave decimation AGC parameters at default values */

View file

@ -574,11 +574,11 @@ static struct dvb_frontend_ops nxt6000_ops = {
.symbol_rate_max = 9360000, /* FIXME */
.symbol_rate_tolerance = 4000,
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO,
FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO,
},
.release = nxt6000_release,

View file

@ -521,8 +521,8 @@ static void s5h1420_setfec_inversion(struct s5h1420_state* state,
case FEC_3_4:
s5h1420_writereg(state, 0x30, 0x04);
s5h1420_writereg(state, 0x31, 0x12 | inversion);
break;
s5h1420_writereg(state, 0x31, 0x12 | inversion);
break;
case FEC_5_6:
s5h1420_writereg(state, 0x30, 0x08);

View file

@ -581,7 +581,7 @@ static struct dvb_frontend_ops sp887x_ops = {
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
FE_CAN_RECOVER
FE_CAN_RECOVER
},
.release = sp887x_release,

View file

@ -95,7 +95,7 @@ static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
u8 b0 [] = { reg };
u8 b1 [] = { 0 };
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
int ret;
ret = i2c_transfer (state->i2c, msg, 2);
@ -434,7 +434,7 @@ static struct dvb_frontend_ops tda10021_ops = {
.frequency_max = 858000000,
.symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */
.symbol_rate_max = (XIN/2)/4, /* SACLK/4 */
#if 0
#if 0
.frequency_tolerance = ???,
.symbol_rate_tolerance = ???, /* ppm */ /* == 8% (spec p. 5) */
#endif

View file

@ -289,10 +289,10 @@ static int tda10046h_set_bandwidth(struct tda1004x_state *state,
case BANDWIDTH_6_MHZ:
if (tda10046_clk53m)
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
sizeof(bandwidth_6mhz_53M));
sizeof(bandwidth_6mhz_53M));
else
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
sizeof(bandwidth_6mhz_48M));
sizeof(bandwidth_6mhz_48M));
if (state->config->if_freq == TDA10046_FREQ_045) {
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
@ -302,10 +302,10 @@ static int tda10046h_set_bandwidth(struct tda1004x_state *state,
case BANDWIDTH_7_MHZ:
if (tda10046_clk53m)
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
sizeof(bandwidth_7mhz_53M));
sizeof(bandwidth_7mhz_53M));
else
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
sizeof(bandwidth_7mhz_48M));
sizeof(bandwidth_7mhz_48M));
if (state->config->if_freq == TDA10046_FREQ_045) {
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
@ -315,10 +315,10 @@ static int tda10046h_set_bandwidth(struct tda1004x_state *state,
case BANDWIDTH_8_MHZ:
if (tda10046_clk53m)
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
sizeof(bandwidth_8mhz_53M));
sizeof(bandwidth_8mhz_53M));
else
tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
sizeof(bandwidth_8mhz_48M));
sizeof(bandwidth_8mhz_48M));
if (state->config->if_freq == TDA10046_FREQ_045) {
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);

View file

@ -8,7 +8,7 @@ config DVB_PLUTO2
Support for PCI cards based on the Pluto2 FPGA like the Satelco
Easywatch Mobile Terrestrial DVB-T Receiver.
Since these cards have no MPEG decoder onboard, they transmit
Since these cards have no MPEG decoder onboard, they transmit
only compressed MPEG data over the PCI bus, so you need
an external software decoder to watch TV on your computer.

View file

@ -18,9 +18,9 @@ config DVB_AV7110
This driver only supports the fullfeatured cards with
onboard MPEG2 decoder.
This driver needs an external firmware. Please use the script
"<kerneldir>/Documentation/dvb/get_dvb_firmware av7110" to
download/extract it, and then copy it to /usr/lib/hotplug/firmware.
This driver needs an external firmware. Please use the script
"<kerneldir>/Documentation/dvb/get_dvb_firmware av7110" to
download/extract it, and then copy it to /usr/lib/hotplug/firmware.
Say Y if you own such a card and want to use it.

View file

@ -16,7 +16,7 @@ EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
hostprogs-y := fdump
ifdef CONFIG_DVB_AV7110_FIRMWARE
$(obj)/av7110.o: $(obj)/fdump $(obj)/av7110_firm.h
$(obj)/av7110.o: $(obj)/fdump $(obj)/av7110_firm.h
$(obj)/av7110_firm.h:
$(obj)/fdump $(CONFIG_DVB_AV7110_FIRMWARE_FILE) dvb_ttpci_fw $@

View file

@ -2259,7 +2259,7 @@ static int frontend_init(struct av7110 *av7110)
}
// Try the grundig 29504-451
av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
if (av7110->fe) {
av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
@ -2285,12 +2285,12 @@ static int frontend_init(struct av7110 *av7110)
case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
// ALPS TDLB7
av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
break;
case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
break;
case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */

View file

@ -1206,9 +1206,9 @@ int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
switch (cap->cmd) {
case OSD_CAP_MEMSIZE:
if (FW_4M_SDRAM(av7110->arm_app))
cap->val = 1000000;
cap->val = 1000000;
else
cap->val = 92000;
cap->val = 92000;
return 0;
default:
return -EINVAL;

View file

@ -275,7 +275,7 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
// that is unreliable however, so try and read from IO memory
if (!cam_present)
{
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT)
{
cam_present = 1;

View file

@ -13,7 +13,7 @@
Holger Waechtler Convergence
Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>
Metzler Brothers Systementwicklung GbR
Metzler Brothers Systementwicklung GbR
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by

View file

@ -10,7 +10,7 @@ config DVB_TTUSB_BUDGET
Support for external USB adapters designed by Technotrend and
produced by Hauppauge, shipped under the brand name 'Nova-USB'.
These devices don't have a MPEG decoder built in, so you need
These devices don't have a MPEG decoder built in, so you need
an external software decoder to watch TV.
Say Y if you own such a device and want to use it.

View file

@ -8,14 +8,14 @@ config DVB_TTUSB_DEC
produced by Hauppauge, shipped under the brand name 'DEC2000-t'
and 'DEC3000-s'.
Even if these devices have a MPEG decoder built in, they transmit
Even if these devices have a MPEG decoder built in, they transmit
only compressed MPEG data over the USB bus, so you need
an external software decoder to watch TV on your computer.
This driver needs external firmware. Please use the commands
"<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t",
"<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t",
"<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s",
download/extract them, and then copy them to /usr/lib/hotplug/firmware.
This driver needs external firmware. Please use the commands
"<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t",
"<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t",
"<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s",
download/extract them, and then copy them to /usr/lib/hotplug/firmware.
Say Y if you own such a device and want to use it.

View file

@ -1182,7 +1182,7 @@ static void ttusb_dec_init_tasklet(struct ttusb_dec *dec)
(unsigned long)dec);
}
static int ttusb_init_rc(struct ttusb_dec *dec)
static int ttusb_init_rc( struct ttusb_dec *dec)
{
struct input_dev *input_dev;
u8 b[] = { 0x00, 0x01 };
@ -1203,13 +1203,12 @@ static int ttusb_init_rc(struct ttusb_dec *dec)
input_dev->keycode = rc_keys;
for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
set_bit(rc_keys[i], input_dev->keybit);
set_bit(rc_keys[i], input_dev->keybit);
input_register_device(input_dev);
if (usb_submit_urb(dec->irq_urb, GFP_KERNEL))
printk("%s: usb_submit_urb failed\n",__FUNCTION__);
/* enable irq pipe */
ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL);

View file

@ -69,7 +69,7 @@ static void video_release(struct class_device *cd)
struct video_device *vfd = container_of(cd, struct video_device, class_dev);
#if 1
/* needed until all drivers are fixed */
/* needed until all drivers are fixed */
if (!vfd->release)
return;
#endif
@ -339,11 +339,11 @@ int video_register_device(struct video_device *vfd, int type, int nr)
if (vfd->dev)
vfd->class_dev.dev = vfd->dev;
vfd->class_dev.class = &video_class;
vfd->class_dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor);
vfd->class_dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor);
strlcpy(vfd->class_dev.class_id, vfd->devfs_name + 4, BUS_ID_SIZE);
class_device_register(&vfd->class_dev);
class_device_create_file(&vfd->class_dev,
&class_device_attr_name);
&class_device_attr_name);
#if 1
/* needed until all drivers are fixed */

View file

@ -25,7 +25,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/ioctl.h>