redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

ARM: shmobile: Break out R-Car Gen2 setup code

Browse source 
Move arch timer workaround code and boot mode pin
handling from setup-r8a7790.c to setup-rcar-gen2.c.

With this in place the same code can be used on
other R-Car Generation 2 devices such as r8a7791.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au trivial rebase of board-lager.c
 for introduction of lager_add_standard_devices()]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
Magnus Damm 2013-09-12 09:32:49 +09:00 committed by Simon Horman
parent b9b28f5254
commit 50c517d92e
8 changed files with 106 additions and 74 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
arch/arm/mach-shmobile/Makefile
View file

@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o

2
arch/arm/mach-shmobile/board-lager-reference.c
View file

@ -40,7 +40,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.init_time = r8a7790_timer_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END

2
arch/arm/mach-shmobile/board-lager.c
View file

@ -188,7 +188,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
.init_time = r8a7790_timer_init,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END

2
arch/arm/mach-shmobile/clock-r8a7790.c
View file

@ -310,7 +310,7 @@ static struct clk_lookup lookups[] = {
void __init r8a7790_clock_init(void)
{
u32 mode = r8a7790_read_mode_pins();
u32 mode = rcar_gen2_read_mode_pins();
int k, ret = 0;
switch (mode & (MD(14) | MD(13))) {

6
arch/arm/mach-shmobile/include/mach/r8a7790.h
View file

@ -1,15 +1,13 @@
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
#include <mach/rcar-gen2.h>
void r8a7790_add_standard_devices(void);
void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_init_early(void);
void r8a7790_timer_init(void);
extern struct smp_operations r8a7790_smp_ops;
#define MD(nr) BIT(nr)
u32 r8a7790_read_mode_pins(void);
#endif /* __ASM_R8A7790_H__ */

8
arch/arm/mach-shmobile/include/mach/rcar-gen2.h Normal file
View file

@ -0,0 +1,8 @@
#ifndef __ASM_RCAR_GEN2_H__
#define __ASM_RCAR_GEN2_H__
void rcar_gen2_timer_init(void);
#define MD(nr) BIT(nr)
u32 rcar_gen2_read_mode_pins(void);
#endif /* __ASM_RCAR_GEN2_H__ */

68
arch/arm/mach-shmobile/setup-r8a7790.c
View file

@ -18,7 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clocksource.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
@ -203,71 +202,6 @@ void __init r8a7790_add_standard_devices(void)
r8a7790_register_thermal();
}
#define MODEMR 0xe6160060
u32 __init r8a7790_read_mode_pins(void)
{
void __iomem *modemr = ioremap_nocache(MODEMR, 4);
u32 mode;
BUG_ON(!modemr);
mode = ioread32(modemr);
iounmap(modemr);
return mode;
}
#define CNTCR 0
#define CNTFID0 0x20
void __init r8a7790_timer_init(void)
{
#ifdef CONFIG_ARM_ARCH_TIMER
u32 mode = r8a7790_read_mode_pins();
void __iomem *base;
int extal_mhz = 0;
u32 freq;
/* At Linux boot time the r8a7790 arch timer comes up
* with the counter disabled. Moreover, it may also report
* a potentially incorrect fixed 13 MHz frequency. To be
* correct these registers need to be updated to use the
* frequency EXTAL / 2 which can be determined by the MD pins.
*/
switch (mode & (MD(14) | MD(13))) {
case 0:
extal_mhz = 15;
break;
case MD(13):
extal_mhz = 20;
break;
case MD(14):
extal_mhz = 26;
break;
case MD(13) | MD(14):
extal_mhz = 30;
break;
}
/* The arch timer frequency equals EXTAL / 2 */
freq = extal_mhz * (1000000 / 2);
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
/* Update registers with correct frequency */
iowrite32(freq, base + CNTFID0);
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
/* make sure arch timer is started by setting bit 0 of CNTCR */
iowrite32(1, base + CNTCR);
iounmap(base);
#endif /* CONFIG_ARM_ARCH_TIMER */
clocksource_of_init();
}
void __init r8a7790_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
@ -285,7 +219,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
.init_time = r8a7790_timer_init,
.init_time = rcar_gen2_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */

91
arch/arm/mach-shmobile/setup-rcar-gen2.c Normal file
View file

@ -0,0 +1,91 @@
/*
* R-Car Generation 2 support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <mach/common.h>
#include <mach/rcar-gen2.h>
#include <asm/mach/arch.h>
#define MODEMR 0xe6160060
u32 __init rcar_gen2_read_mode_pins(void)
{
void __iomem *modemr = ioremap_nocache(MODEMR, 4);
u32 mode;
BUG_ON(!modemr);
mode = ioread32(modemr);
iounmap(modemr);
return mode;
}
#define CNTCR 0
#define CNTFID0 0x20
void __init rcar_gen2_timer_init(void)
{
#ifdef CONFIG_ARM_ARCH_TIMER
u32 mode = rcar_gen2_read_mode_pins();
void __iomem *base;
int extal_mhz = 0;
u32 freq;
/* At Linux boot time the r8a7790 arch timer comes up
* with the counter disabled. Moreover, it may also report
* a potentially incorrect fixed 13 MHz frequency. To be
* correct these registers need to be updated to use the
* frequency EXTAL / 2 which can be determined by the MD pins.
*/
switch (mode & (MD(14) | MD(13))) {
case 0:
extal_mhz = 15;
break;
case MD(13):
extal_mhz = 20;
break;
case MD(14):
extal_mhz = 26;
break;
case MD(13) | MD(14):
extal_mhz = 30;
break;
}
/* The arch timer frequency equals EXTAL / 2 */
freq = extal_mhz * (1000000 / 2);
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
/* Update registers with correct frequency */
iowrite32(freq, base + CNTFID0);
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
/* make sure arch timer is started by setting bit 0 of CNTCR */
iowrite32(1, base + CNTCR);
iounmap(base);
#endif /* CONFIG_ARM_ARCH_TIMER */
clocksource_of_init();
}