redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge remote branch 'kumar/next' into merge

Browse source
This commit is contained in:
Benjamin Herrenschmidt 2011-01-21 11:00:44 +11:00
parent 12fcdba1b7 b49d81ded4
commit 50f4df4e6a
9 changed files with 58 additions and 16 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/powerpc/boot/dts/mpc8308rdb.dts
View file

@ -109,7 +109,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8315-immr", "simple-bus";
compatible = "fsl,mpc8308-immr", "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;

4
arch/powerpc/boot/dts/p1022ds.dts
View file

@ -291,13 +291,13 @@
ranges = <0x0 0xc100 0x200>;
cell-index = <1>;
dma00: dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
compatible = "fsl,ssi-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupts = <76 2>;
};
dma01: dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
compatible = "fsl,ssi-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupts = <77 2>;

21
arch/powerpc/include/asm/immap_qe.h
View file

@ -467,13 +467,22 @@ struct qe_immap {
extern struct qe_immap __iomem *qe_immr;
extern phys_addr_t get_qe_base(void);
static inline unsigned long immrbar_virt_to_phys(void *address)
/*
* Returns the offset within the QE address space of the given pointer.
*
* Note that the QE does not support 36-bit physical addresses, so if
* get_qe_base() returns a number above 4GB, the caller will probably fail.
*/
static inline phys_addr_t immrbar_virt_to_phys(void *address)
{
if ( ((u32)address >= (u32)qe_immr) &&
((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
return (unsigned long)(address - (u32)qe_immr +
(u32)get_qe_base());
return (unsigned long)virt_to_phys(address);
void *q = (void *)qe_immr;
/* Is it a MURAM address? */
if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
return get_qe_base() + (address - q);
/* It's an address returned by kmalloc */
return virt_to_phys(address);
}
#endif /* __KERNEL__ */

2
arch/powerpc/include/asm/reg.h
View file

@ -283,6 +283,7 @@
#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#ifdef CONFIG_6xx
#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
@ -292,6 +293,7 @@
#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
#define HID1_PS (1<<16) /* 750FX PLL selection */
#endif
#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
#define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */

14
arch/powerpc/include/asm/reg_booke.h
View file

@ -246,6 +246,20 @@
store or cache line push */
#endif
/* Bit definitions for the HID1 */
#ifdef CONFIG_E500
/* e500v1/v2 */
#define HID1_PLL_CFG_MASK 0xfc000000 /* PLL_CFG input pins */
#define HID1_RFXE 0x00020000 /* Read fault exception enable */
#define HID1_R1DPE 0x00008000 /* R1 data bus parity enable */
#define HID1_R2DPE 0x00004000 /* R2 data bus parity enable */
#define HID1_ASTME 0x00002000 /* Address bus streaming mode enable */
#define HID1_ABE 0x00001000 /* Address broadcast enable */
#define HID1_MPXTT 0x00000400 /* MPX re-map transfer type */
#define HID1_ATS 0x00000080 /* Atomic status */
#define HID1_MID_MASK 0x0000000f /* MID input pins */
#endif
/* Bit definitions for the DBSR. */
/*
* DBSR bits which have conflicting definitions on true Book E versus IBM 40x.

6
arch/powerpc/kernel/cpu_setup_fsl_booke.S
View file

@ -64,6 +64,12 @@ _GLOBAL(__setup_cpu_e500v2)
bl __e500_icache_setup
bl __e500_dcache_setup
bl __setup_e500_ivors
#ifdef CONFIG_RAPIDIO
/* Ensure that RFXE is set */
mfspr r3,SPRN_HID1
oris r3,r3,HID1_RFXE@h
mtspr SPRN_HID1,r3
#endif
mtlr r4
blr
_GLOBAL(__setup_cpu_e500mc)

2
arch/powerpc/platforms/83xx/mpc83xx.h
View file

@ -35,6 +35,8 @@
/* system i/o configuration register high */
#define MPC83XX_SICRH_OFFS 0x118
#define MPC8308_SICRH_USB_MASK 0x000c0000
#define MPC8308_SICRH_USB_ULPI 0x00040000
#define MPC834X_SICRH_USB_UTMI 0x00020000
#define MPC831X_SICRH_USB_MASK 0x000000e0
#define MPC831X_SICRH_USB_ULPI 0x000000a0

21
arch/powerpc/platforms/83xx/usb.c
View file

@ -127,7 +127,8 @@ int mpc831x_usb_cfg(void)
/* Configure clock */
immr_node = of_get_parent(np);
if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") ||
of_device_is_compatible(immr_node, "fsl,mpc8308-immr")))
clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
MPC8315_SCCR_USB_MASK,
MPC8315_SCCR_USB_DRCM_01);
@ -138,7 +139,11 @@ int mpc831x_usb_cfg(void)
/* Configure pin mux for ULPI. There is no pin mux for UTMI */
if (prop && !strcmp(prop, "ulpi")) {
if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
MPC8308_SICRH_USB_MASK,
MPC8308_SICRH_USB_ULPI);
} else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
MPC8315_SICRL_USB_MASK,
MPC8315_SICRL_USB_ULPI);
@ -173,6 +178,9 @@ int mpc831x_usb_cfg(void)
!strcmp(prop, "utmi"))) {
u32 refsel;
if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))
goto out;
if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
refsel = CONTROL_REFSEL_24MHZ;
else
@ -186,9 +194,11 @@ int mpc831x_usb_cfg(void)
temp = CONTROL_PHY_CLK_SEL_ULPI;
#ifdef CONFIG_USB_OTG
/* Set OTG_PORT */
dr_mode = of_get_property(np, "dr_mode", NULL);
if (dr_mode && !strcmp(dr_mode, "otg"))
temp |= CONTROL_OTG_PORT;
if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
dr_mode = of_get_property(np, "dr_mode", NULL);
if (dr_mode && !strcmp(dr_mode, "otg"))
temp |= CONTROL_OTG_PORT;
}
#endif /* CONFIG_USB_OTG */
out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp);
} else {
@ -196,6 +206,7 @@ int mpc831x_usb_cfg(void)
ret = -EINVAL;
}
out:
iounmap(usb_regs);
of_node_put(np);
return ret;

2
arch/powerpc/sysdev/fsl_rio.c
View file

@ -1555,8 +1555,6 @@ int fsl_rio_setup(struct platform_device *dev)
saved_mcheck_exception = ppc_md.machine_check_exception;
ppc_md.machine_check_exception = fsl_rio_mcheck_exception;
#endif
/* Ensure that RFXE is set */
mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000));
return 0;
err: