mvebu dt for 4.6 (part 1)
- Improve Armada 38x device tree (SATA and XHCI) - Fix SD Card and audio support for OpenRD board - Provide template for RS-232/485 configuration for the same board - Use a common dtsi file for linkstation boards - Add support for Buffalo Linkstation LS-QVL -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAla5uQgACgkQCwYYjhRyO9V6zQCeKOzw/m1ORr7JskrQjovaz4Ni AIoAoJ9+/Gqa4sS6J+ZggH2oQnN+aeww =wcTq -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu into next/dt mvebu dt for 4.6 (part 1) - Improve Armada 38x device tree (SATA and XHCI) - Fix SD Card and audio support for OpenRD board - Provide template for RS-232/485 configuration for the same board - Use a common dtsi file for linkstation boards - Add support for Buffalo Linkstation LS-QVL * tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl ARM: dts: kirkwood: fix audio for OpenRD clients ARM: dts: kirkwood: provide template for RS-232/485 configuration for OpenRD ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11 ARM: dts: kirkwood: fix SD slot default configuration for OpenRD ARM: dts: kirkwood: fix pin names for UART/SD selection for OpenRD ARM: dts: armada-370: Update the mpp63 function in the device tree on Armada 370 ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GP ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GP ARM: dts: armada-38x: adjust board name and compatible for Armada 388 GP Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
commit
53a7aa0b49
|
@ -19,9 +19,12 @@ SoC. Currently known SoC compatibles are:
|
|||
And in addition, the compatible shall be extended with the specific
|
||||
board. Currently known boards are:
|
||||
|
||||
"buffalo,linkstation-lsqvl"
|
||||
"buffalo,linkstation-lsvl"
|
||||
"buffalo,linkstation-lswsxl"
|
||||
"buffalo,linkstation-lswxl"
|
||||
"buffalo,linkstation-lswvl"
|
||||
"buffalo,lschlv2"
|
||||
"buffalo,lswvl"
|
||||
"buffalo,lswxl"
|
||||
"buffalo,lsxhl"
|
||||
"buffalo,lsxl"
|
||||
"cloudengines,pogo02"
|
||||
|
|
|
@ -91,6 +91,9 @@ mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rstout),
|
|||
mpp61 61 gpo, dev(we1), uart1(txd), audio(lrclk)
|
||||
mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
|
||||
audio(mclk), uart0(cts)
|
||||
mpp63 63 gpo, spi0(sck), tclk
|
||||
mpp63 63 gpio, spi0(sck), tclk
|
||||
mpp64 64 gpio, spi0(miso), spi0(cs1)
|
||||
mpp65 65 gpio, spi0(mosi), spi0(cs2)
|
||||
|
||||
Note: According to the datasheet mpp63 is a gpo but there is at least
|
||||
one example of a gpio usage on the board D-Link DNS-327L
|
||||
|
|
|
@ -189,9 +189,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
|||
kirkwood-is2.dtb \
|
||||
kirkwood-km_kirkwood.dtb \
|
||||
kirkwood-laplug.dtb \
|
||||
kirkwood-linkstation-lsqvl.dtb \
|
||||
kirkwood-linkstation-lsvl.dtb \
|
||||
kirkwood-linkstation-lswsxl.dtb \
|
||||
kirkwood-linkstation-lswvl.dtb \
|
||||
kirkwood-linkstation-lswxl.dtb \
|
||||
kirkwood-lschlv2.dtb \
|
||||
kirkwood-lswvl.dtb \
|
||||
kirkwood-lswxl.dtb \
|
||||
kirkwood-lsxhl.dtb \
|
||||
kirkwood-mplcec4.dtb \
|
||||
kirkwood-mv88f6281gtw-ge.dtb \
|
||||
|
|
|
@ -200,7 +200,7 @@
|
|||
&pinctrl {
|
||||
pwr_led_pin: pwr-led-pin {
|
||||
marvell,pins = "mpp63";
|
||||
marvell,function = "gpo";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
stat_led_pins: stat-led-pins {
|
||||
|
|
|
@ -297,7 +297,7 @@
|
|||
|
||||
backup_led_pin: backup-led-pin {
|
||||
marvell,pins = "mpp63";
|
||||
marvell,function = "gpo";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
power_led_pin: power-led-pin {
|
||||
|
|
|
@ -339,7 +339,7 @@
|
|||
|
||||
fan_ctrl_high_pin: fan-ctrl-high-pin {
|
||||
marvell,pins = "mpp63";
|
||||
marvell,function = "gpo";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
fan_alarm_pin: fan-alarm-pin {
|
||||
|
|
|
@ -44,8 +44,8 @@
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Marvell Armada 385 GP";
|
||||
compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
|
||||
model = "Marvell Armada 388 DB-88F6820-GP";
|
||||
compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
|
@ -229,13 +229,13 @@
|
|||
|
||||
/* CON5 */
|
||||
usb3@f0000 {
|
||||
vcc-supply = <®_usb2_1_vbus>;
|
||||
usb-phy = <&usb2_1_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* CON7 */
|
||||
usb3@f8000 {
|
||||
vcc-supply = <®_usb3_vbus>;
|
||||
usb-phy = <&usb3_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
@ -273,13 +273,22 @@
|
|||
};
|
||||
};
|
||||
|
||||
usb2_1_phy: usb2_1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb2_1_vbus>;
|
||||
};
|
||||
|
||||
usb3_phy: usb3_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_vbus>;
|
||||
};
|
||||
|
||||
reg_usb3_vbus: usb3-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb3-vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
@ -299,7 +308,6 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
@ -309,7 +317,7 @@
|
|||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
@ -318,7 +326,6 @@
|
|||
regulator-name = "v5.0-sata0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata0>;
|
||||
};
|
||||
|
||||
|
@ -327,7 +334,6 @@
|
|||
regulator-name = "v12.0-sata0";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata0>;
|
||||
};
|
||||
|
||||
|
@ -337,7 +343,7 @@
|
|||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
@ -346,7 +352,6 @@
|
|||
regulator-name = "v5.0-sata1";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata1>;
|
||||
};
|
||||
|
||||
|
@ -355,7 +360,6 @@
|
|||
regulator-name = "v12.0-sata1";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata1>;
|
||||
};
|
||||
|
||||
|
@ -363,7 +367,7 @@
|
|||
compatible = "regulator-fixed";
|
||||
regulator-name = "pwr_en_sata2";
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
@ -372,7 +376,6 @@
|
|||
regulator-name = "v5.0-sata2";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata2>;
|
||||
};
|
||||
|
||||
|
@ -381,7 +384,6 @@
|
|||
regulator-name = "v12.0-sata2";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata2>;
|
||||
};
|
||||
|
||||
|
@ -389,7 +391,7 @@
|
|||
compatible = "regulator-fixed";
|
||||
regulator-name = "pwr_en_sata3";
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
@ -398,7 +400,6 @@
|
|||
regulator-name = "v5.0-sata3";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata3>;
|
||||
};
|
||||
|
||||
|
@ -407,7 +408,6 @@
|
|||
regulator-name = "v12.0-sata3";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_sata3>;
|
||||
};
|
||||
};
|
||||
|
|
192
arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
Normal file
192
arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
Normal file
|
@ -0,0 +1,192 @@
|
|||
/*
|
||||
* Device Tree common file for kirkwood-6282 based Buffalo Linkstation
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6282.dtsi"
|
||||
#include "kirkwood-linkstation.dtsi"
|
||||
|
||||
/ {
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd0: pmx-power-hdd0 {
|
||||
marvell,pins = "mpp8";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_usb_vbus: pmx-usb-vbus {
|
||||
marvell,pins = "mpp12";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_high: pmx-fan-high {
|
||||
marvell,pins = "mpp16";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_low: pmx-fan-low {
|
||||
marvell,pins = "mpp17";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_alarm: pmx-led-alarm {
|
||||
marvell,pins = "mpp36";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_red: pmx-led-function-red {
|
||||
marvell,pins = "mpp37";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_info: pmx-led-info {
|
||||
marvell,pins = "mpp38";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_blue: pmx-led-function-blue {
|
||||
marvell,pins = "mpp39";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_power: pmx-led-power {
|
||||
marvell,pins = "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_lock: pmx-fan-lock {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,pins = "mpp45";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_switch: pmx-power-switch {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_auto_switch: pmx-power-auto-switch {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
function-button {
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power-on-switch {
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power-auto-switch {
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
red-alarm-led {
|
||||
label = "linkstation:red:alarm";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red-function-led {
|
||||
label = "linkstation:red:function";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
amber-info-led {
|
||||
label = "linkstation:amber:info";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
blue-function-led {
|
||||
label = "linkstation:blue:function";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
blue-power-led {
|
||||
label = "linkstation:blue:power";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_fan {
|
||||
compatible = "gpio-fan";
|
||||
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&gpio0 17 GPIO_ACTIVE_LOW
|
||||
&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
|
||||
gpio-fan,speed-map = <0 3
|
||||
1500 2
|
||||
3250 1
|
||||
5000 0>;
|
||||
|
||||
alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
usb_power: regulator@1 {
|
||||
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
hdd_power0: regulator@2 {
|
||||
gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
ethernet0-port@0 {
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
};
|
186
arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
Normal file
186
arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
Normal file
|
@ -0,0 +1,186 @@
|
|||
/*
|
||||
* Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
#include "kirkwood-linkstation.dtsi"
|
||||
|
||||
/ {
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd0: pmx-power-hdd0 {
|
||||
marvell,pins = "mpp28";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_hdd1: pmx-power-hdd1 {
|
||||
marvell,pins = "mpp29";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_usb_vbus: pmx-usb-vbus {
|
||||
marvell,pins = "mpp37";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_alarm: pmx-led-alarm {
|
||||
marvell,pins = "mpp49";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_red: pmx-led-function-red {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_blue: pmx-led-function-blue {
|
||||
marvell,pins = "mpp36";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_info: pmx-led-info {
|
||||
marvell,pins = "mpp38";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_power: pmx-led-power {
|
||||
marvell,pins = "mpp39";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,pins = "mpp41";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_switch: pmx-power-switch {
|
||||
marvell,pins = "mpp42";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_auto_switch: pmx-power-auto-switch {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
nr-ports = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
function-button {
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power-on-switch {
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power-auto-switch {
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
red-alarm-led {
|
||||
label = "linkstation:red:alarm";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
red-function-led {
|
||||
label = "linkstation:red:function";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
amber-info-led {
|
||||
label = "linkstation:amber:info";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
blue-function-led {
|
||||
label = "linkstation:blue:function";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
blue-power-led {
|
||||
label = "linkstation:blue:power";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
|
||||
|
||||
usb_power: regulator@1 {
|
||||
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
hdd_power0: regulator@2 {
|
||||
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
hdd_power1: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "HDD1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy1: ethernet-phy@8 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
ethernet1-port@0 {
|
||||
phy-handle = <ðphy1>;
|
||||
};
|
||||
};
|
135
arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
Normal file
135
arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
Normal file
|
@ -0,0 +1,135 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-QVL
|
||||
*
|
||||
* Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
|
||||
*
|
||||
* Based on kirkwood-linkstation-lswvl.dts,
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "kirkwood-linkstation-6282.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-QVL";
|
||||
compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
|
||||
memory { /* 256 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd1: pmx-power-hdd1 {
|
||||
marvell,pins = "mpp9";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr0: pmx-led-hdderr0 {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr1: pmx-led-hdderr1 {
|
||||
marvell,pins = "mpp35";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr2: pmx-led-hdderr2 {
|
||||
marvell,pins = "mpp24";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr3: pmx-led-hdderr3 {
|
||||
marvell,pins = "mpp25";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
nr-ports = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue
|
||||
&pmx_led_hdderr0
|
||||
&pmx_led_hdderr1
|
||||
&pmx_led_hdderr2
|
||||
&pmx_led_hdderr3>;
|
||||
|
||||
red-hdderr0-led {
|
||||
label = "linkstation:red:hdderr0";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
red-hdderr1-led {
|
||||
label = "linkstation:red:hdderr1";
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
red-hdderr2-led {
|
||||
label = "linkstation:red:hdderr2";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
red-hdderr3-led {
|
||||
label = "linkstation:red:hdderr3";
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
|
||||
|
||||
hdd_power1: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "HDD1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
57
arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
Normal file
57
arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
Normal file
|
@ -0,0 +1,57 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-VL
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "kirkwood-linkstation-6282.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-VL";
|
||||
compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
|
||||
memory { /* 256 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
};
|
57
arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
Normal file
57
arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
Normal file
|
@ -0,0 +1,57 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-WSXL
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "kirkwood-linkstation-duo-6281.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-WSXL";
|
||||
compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory { /* 128 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
};
|
112
arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
Normal file
112
arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
Normal file
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-WVL
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "kirkwood-linkstation-6282.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-WVL";
|
||||
compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
|
||||
memory { /* 256 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd1: pmx-power-hdd1 {
|
||||
marvell,pins = "mpp9";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr0: pmx-led-hdderr0 {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr1: pmx-led-hdderr1 {
|
||||
marvell,pins = "mpp35";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
nr-ports = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue
|
||||
&pmx_led_hdderr0
|
||||
&pmx_led_hdderr1>;
|
||||
|
||||
red-hdderr0-led {
|
||||
label = "linkstation:red:hdderr0";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red-hdderr1-led {
|
||||
label = "linkstation:red:hdderr1";
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
|
||||
|
||||
hdd_power1: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "HDD1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
116
arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
Normal file
116
arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
Normal file
|
@ -0,0 +1,116 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-WXL
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "kirkwood-linkstation-duo-6281.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-WXL";
|
||||
compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory { /* 128 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_led_hdderr0: pmx-led-hdderr0 {
|
||||
marvell,pins = "mpp8";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr1: pmx-led-hdderr1 {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_lock: pmx-fan-lock {
|
||||
marvell,pins = "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_high: pmx-fan-high {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_low: pmx-fan-low {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue
|
||||
&pmx_led_hdderr0
|
||||
&pmx_led_hdderr1>;
|
||||
|
||||
red-hdderr0-led {
|
||||
label = "linkstation:red:hdderr0";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red-hdderr1-led {
|
||||
label = "linkstation:red:hdderr1";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_fan {
|
||||
compatible = "gpio-fan";
|
||||
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
|
||||
&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
|
||||
gpio-fan,speed-map = <0 3
|
||||
1500 2
|
||||
3250 1
|
||||
5000 0>;
|
||||
|
||||
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
202
arch/arm/boot/dts/kirkwood-linkstation.dtsi
Normal file
202
arch/arm/boot/dts/kirkwood-linkstation.dtsi
Normal file
|
@ -0,0 +1,202 @@
|
|||
/*
|
||||
* Device Tree common file for kirkwood based Buffalo Linkstation
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
mbus {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd0: pmx-power-hdd0 {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_usb_vbus: pmx-usb-vbus {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_alarm: pmx-led-alarm {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_red: pmx-led-function-red {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_blue: pmx-led-function-blue {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_info: pmx-led-info {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_power: pmx-led-power {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_switch: pmx-power-switch {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_auto_switch: pmx-power-auto-switch {
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <1>;
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
|
||||
m25p40@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p40", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x60000>;
|
||||
label = "uboot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
reg = <0x60000 0x10000>;
|
||||
label = "dtb";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
reg = <0x70000 0x10000>;
|
||||
label = "uboot_env";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
||||
&pmx_power_auto_switch>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
function-button {
|
||||
label = "Function Button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
};
|
||||
|
||||
power-on-switch {
|
||||
label = "Power-on Switch";
|
||||
linux,code = <KEY_RESERVED>;
|
||||
linux,input-type = <5>;
|
||||
};
|
||||
|
||||
power-auto-switch {
|
||||
label = "Power-auto Switch";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
restart_poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "USB Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
hdd_power0: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "HDD0 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
|
@ -1,302 +0,0 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-WVL/VL
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6282.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-WVL/VL";
|
||||
compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
|
||||
memory { /* 256 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
mbus {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd0: pmx-power-hdd0 {
|
||||
marvell,pins = "mpp8";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_hdd1: pmx-power-hdd1 {
|
||||
marvell,pins = "mpp9";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_usb_vbus: pmx-usb-vbus {
|
||||
marvell,pins = "mpp12";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_high: pmx-fan-high {
|
||||
marvell,pins = "mpp16";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_low: pmx-fan-low {
|
||||
marvell,pins = "mpp17";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr0: pmx-led-hdderr0 {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr1: pmx-led-hdderr1 {
|
||||
marvell,pins = "mpp35";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_alarm: pmx-led-alarm {
|
||||
marvell,pins = "mpp36";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_red: pmx-led-function-red {
|
||||
marvell,pins = "mpp37";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_info: pmx-led-info {
|
||||
marvell,pins = "mpp38";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_blue: pmx-led-function-blue {
|
||||
marvell,pins = "mpp39";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_power: pmx-led-power {
|
||||
marvell,pins = "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_lock: pmx-fan-lock {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,pins = "mpp45";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_switch: pmx-power-switch {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_auto_switch: pmx-power-auto-switch {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
|
||||
m25p40@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p40", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x60000>;
|
||||
label = "uboot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
reg = <0x60000 0x10000>;
|
||||
label = "dtb";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
reg = <0x70000 0x10000>;
|
||||
label = "uboot_env";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
||||
&pmx_power_auto_switch>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button@1 {
|
||||
label = "Function Button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@2 {
|
||||
label = "Power-on Switch";
|
||||
linux,code = <KEY_RESERVED>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@3 {
|
||||
label = "Power-auto Switch";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue
|
||||
&pmx_led_hdderr0
|
||||
&pmx_led_hdderr1>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led@1 {
|
||||
label = "lswvl:red:alarm";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
label = "lswvl:red:func";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
label = "lswvl:amber:info";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
label = "lswvl:blue:func";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "lswvl:blue:power";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
led@6 {
|
||||
label = "lswvl:red:hdderr0";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@7 {
|
||||
label = "lswvl:red:hdderr1";
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_fan {
|
||||
compatible = "gpio-fan";
|
||||
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&gpio0 17 GPIO_ACTIVE_LOW
|
||||
&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
|
||||
gpio-fan,speed-map = <0 3
|
||||
1500 2
|
||||
3250 1
|
||||
5000 0>;
|
||||
|
||||
alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
restart_poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "USB Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
hdd_power0: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "HDD0 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
hdd_power1: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "HDD1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
ethernet0-port@0 {
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
};
|
|
@ -1,302 +0,0 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-WXL/WSXL
|
||||
*
|
||||
* Copyright (C) 2015, 2016
|
||||
* Roger Shimizu <rogershimizu@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-WXL/WSXL";
|
||||
compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory { /* 128 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
mbus {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd0: pmx-power-hdd0 {
|
||||
marvell,pins = "mpp28";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_hdd1: pmx-power-hdd1 {
|
||||
marvell,pins = "mpp29";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_usb_vbus: pmx-usb-vbus {
|
||||
marvell,pins = "mpp37";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_high: pmx-fan-high {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_low: pmx-fan-low {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr0: pmx-led-hdderr0 {
|
||||
marvell,pins = "mpp8";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr1: pmx-led-hdderr1 {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_alarm: pmx-led-alarm {
|
||||
marvell,pins = "mpp49";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_red: pmx-led-function-red {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_blue: pmx-led-function-blue {
|
||||
marvell,pins = "mpp36";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_info: pmx-led-info {
|
||||
marvell,pins = "mpp38";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_power: pmx-led-power {
|
||||
marvell,pins = "mpp39";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_lock: pmx-fan-lock {
|
||||
marvell,pins = "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,pins = "mpp41";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_switch: pmx-power-switch {
|
||||
marvell,pins = "mpp42";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_auto_switch: pmx-power-auto-switch {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
|
||||
m25p40@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p40", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x60000>;
|
||||
label = "uboot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
reg = <0x60000 0x10000>;
|
||||
label = "dtb";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
reg = <0x70000 0x10000>;
|
||||
label = "uboot_env";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
||||
&pmx_power_auto_switch>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button@1 {
|
||||
label = "Function Button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@2 {
|
||||
label = "Power-on Switch";
|
||||
linux,code = <KEY_RESERVED>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@3 {
|
||||
label = "Power-auto Switch";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue
|
||||
&pmx_led_hdderr0
|
||||
&pmx_led_hdderr1>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led@1 {
|
||||
label = "lswxl:blue:func";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
label = "lswxl:red:alarm";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
label = "lswxl:amber:info";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
label = "lswxl:blue:power";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "lswxl:red:func";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@6 {
|
||||
label = "lswxl:red:hdderr0";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led@7 {
|
||||
label = "lswxl:red:hdderr1";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_fan {
|
||||
compatible = "gpio-fan";
|
||||
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW
|
||||
&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
|
||||
gpio-fan,speed-map = <0 3
|
||||
1500 2
|
||||
3250 1
|
||||
5000 0>;
|
||||
|
||||
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
restart_poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "USB Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
hdd_power0: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "HDD0 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
hdd_power1: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "HDD1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy1: ethernet-phy@8 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
ethernet1-port@0 {
|
||||
phy-handle = <ðphy1>;
|
||||
};
|
||||
};
|
|
@ -20,6 +20,9 @@
|
|||
compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
ocp@f1000000 {
|
||||
audio-controller@a0000 {
|
||||
status = "okay";
|
||||
};
|
||||
i2c@11000 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
@ -27,6 +30,7 @@
|
|||
cs42l51: cs42l51@4a {
|
||||
compatible = "cirrus,cs42l51";
|
||||
reg = <0x4a>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -37,7 +41,7 @@
|
|||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&audio0>;
|
||||
sound-dai = <&audio0 0>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
|
|
|
@ -40,7 +40,7 @@
|
|||
pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
pmx_select28: pmx-select-uart-sd {
|
||||
pmx_select28: pmx-select-rs232-rs485 {
|
||||
marvell,pins = "mpp28";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
@ -48,7 +48,7 @@
|
|||
marvell,pins = "mpp29";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_select34: pmx-select-rs232-rs484 {
|
||||
pmx_select34: pmx-select-uart-sd {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
@ -65,6 +65,43 @@
|
|||
status = "okay";
|
||||
cd-gpios = <&gpio0 29 9>;
|
||||
};
|
||||
gpio@10100 {
|
||||
p28 {
|
||||
gpio-hog;
|
||||
gpios = <28 GPIO_ACTIVE_HIGH>;
|
||||
/*
|
||||
* SelRS232or485 selects between RS-232 or RS-485
|
||||
* mode for the second UART.
|
||||
*
|
||||
* Low: RS-232
|
||||
* High: RS-485
|
||||
*
|
||||
* To use the second UART, you need to change also
|
||||
* the SelUARTorSD.
|
||||
*/
|
||||
output-low;
|
||||
line-name = "SelRS232or485";
|
||||
};
|
||||
};
|
||||
gpio@10140 {
|
||||
p2 {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||
/*
|
||||
* SelUARTorSD selects between the second UART
|
||||
* (serial@12100) and SD (mvsdio@90000).
|
||||
*
|
||||
* Low: UART
|
||||
* High: SD
|
||||
*
|
||||
* When changing this line make sure the newly
|
||||
* selected device node is enabled and the
|
||||
* previously selected device node is disabled.
|
||||
*/
|
||||
output-high; /* Select SD by default */
|
||||
line-name = "SelUARTorSD";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
@ -381,7 +381,7 @@
|
|||
|
||||
audio0: audio-controller@a0000 {
|
||||
compatible = "marvell,kirkwood-audio";
|
||||
#sound-dai-cells = <0>;
|
||||
#sound-dai-cells = <1>;
|
||||
reg = <0xa0000 0x2210>;
|
||||
interrupts = <24>;
|
||||
clocks = <&gate_clk 9>;
|
||||
|
|
Loading…
Reference in a new issue