ARM: dts: sun5i: add support for Lichee Pi One board
Lichee Pi One is a low-cost Allwinner A13-based development board, with an AXP209 PMU, a USB2.0 OTG port, a USB2.0 host port (or an onboard RTL8723BU Wi-Fi card), optional headers for LCD and CSI, two GPIO headers and two MicroSD card slots (connected to mmc0 and mmc2, both bootable). Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
parent
3e60eb446d
commit
53e32e7032
|
@ -781,6 +781,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
|
||||||
sun5i-a13-empire-electronix-m712.dtb \
|
sun5i-a13-empire-electronix-m712.dtb \
|
||||||
sun5i-a13-hsg-h702.dtb \
|
sun5i-a13-hsg-h702.dtb \
|
||||||
sun5i-a13-inet-98v-rev2.dtb \
|
sun5i-a13-inet-98v-rev2.dtb \
|
||||||
|
sun5i-a13-licheepi-one.dtb \
|
||||||
sun5i-a13-olinuxino.dtb \
|
sun5i-a13-olinuxino.dtb \
|
||||||
sun5i-a13-olinuxino-micro.dtb \
|
sun5i-a13-olinuxino-micro.dtb \
|
||||||
sun5i-a13-q8-tablet.dtb \
|
sun5i-a13-q8-tablet.dtb \
|
||||||
|
|
224
arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
Normal file
224
arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
Normal file
|
@ -0,0 +1,224 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
|
||||||
|
*
|
||||||
|
* Based on sun5i-a13-olinuxino.dts, which is
|
||||||
|
* Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||||
|
* Copyright 2013 Hans de Goede <hdegoede@redhat.com>
|
||||||
|
*
|
||||||
|
* This file is dual-licensed: you can use it either under the terms
|
||||||
|
* of the GPL or the X11 license, at your option. Note that this dual
|
||||||
|
* licensing only applies to this file, and not this project as a
|
||||||
|
* whole.
|
||||||
|
*
|
||||||
|
* a) This file is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of the
|
||||||
|
* License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This file is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* Or, alternatively,
|
||||||
|
*
|
||||||
|
* b) Permission is hereby granted, free of charge, to any person
|
||||||
|
* obtaining a copy of this software and associated documentation
|
||||||
|
* files (the "Software"), to deal in the Software without
|
||||||
|
* restriction, including without limitation the rights to use,
|
||||||
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||||
|
* sell copies of the Software, and to permit persons to whom the
|
||||||
|
* Software is furnished to do so, subject to the following
|
||||||
|
* conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be
|
||||||
|
* included in all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||||
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||||
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||||
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||||
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||||
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||||
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||||
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include "sun5i-a13.dtsi"
|
||||||
|
#include "sunxi-common-regulators.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Lichee Pi One";
|
||||||
|
compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &uart1;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
red {
|
||||||
|
label ="licheepi:red:usr";
|
||||||
|
gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
green {
|
||||||
|
label ="licheepi:green:usr";
|
||||||
|
gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
|
||||||
|
default-state = "on";
|
||||||
|
};
|
||||||
|
|
||||||
|
blue {
|
||||||
|
label ="licheepi:blue:usr";
|
||||||
|
gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&cpu0 {
|
||||||
|
cpu-supply = <®_dcdc2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&ehci0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c0 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&i2c0_pins_a>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
axp209: pmic@34 {
|
||||||
|
compatible = "x-powers,axp209";
|
||||||
|
reg = <0x34>;
|
||||||
|
interrupts = <0>;
|
||||||
|
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&i2c1_pins_a>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&i2c2_pins_a>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
&lradc {
|
||||||
|
vref-supply = <®_ldo2>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
button@984 {
|
||||||
|
label = "Home";
|
||||||
|
linux,code = <KEY_HOMEPAGE>;
|
||||||
|
channel = <0>;
|
||||||
|
voltage = <984126>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&mmc0 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&mmc0_pins_a>;
|
||||||
|
vmmc-supply = <®_vcc3v3>;
|
||||||
|
bus-width = <4>;
|
||||||
|
broken-cd;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mmc2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&mmc2_4bit_pins_a>;
|
||||||
|
vmmc-supply = <®_vcc3v3>;
|
||||||
|
bus-width = <4>;
|
||||||
|
broken-cd;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&ohci0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&otg_sram {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
#include "axp209.dtsi"
|
||||||
|
|
||||||
|
®_dcdc2 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1000000>;
|
||||||
|
regulator-max-microvolt = <1500000>;
|
||||||
|
regulator-name = "vdd-cpu";
|
||||||
|
};
|
||||||
|
|
||||||
|
®_dcdc3 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <1000000>;
|
||||||
|
regulator-max-microvolt = <1400000>;
|
||||||
|
regulator-name = "vdd-int-dll";
|
||||||
|
};
|
||||||
|
|
||||||
|
®_ldo1 {
|
||||||
|
regulator-name = "vdd-rtc";
|
||||||
|
};
|
||||||
|
|
||||||
|
®_ldo2 {
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-min-microvolt = <3000000>;
|
||||||
|
regulator-max-microvolt = <3000000>;
|
||||||
|
regulator-name = "avcc";
|
||||||
|
};
|
||||||
|
|
||||||
|
®_ldo3 {
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
regulator-name = "csi-1.8v";
|
||||||
|
};
|
||||||
|
|
||||||
|
®_ldo4 {
|
||||||
|
regulator-min-microvolt = <2800000>;
|
||||||
|
regulator-max-microvolt = <2800000>;
|
||||||
|
regulator-name = "csi-2.8v";
|
||||||
|
};
|
||||||
|
|
||||||
|
®_usb0_vbus {
|
||||||
|
gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&uart1_pins_b>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb_otg {
|
||||||
|
dr_mode = "otg";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usbphy {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
|
||||||
|
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
|
||||||
|
usb0_vbus-supply = <®_usb0_vbus>;
|
||||||
|
usb1_vbus-supply = <®_vcc5v0>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
Loading…
Reference in a new issue