Merge branch 'upstream-fixes' into upstream
This commit is contained in:
commit
54a86bfc3d
|
@ -390,7 +390,8 @@ static struct ata_port_info piix_port_info[] = {
|
|||
/* ich5_sata */
|
||||
{
|
||||
.sht = &piix_sht,
|
||||
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
|
||||
.host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR |
|
||||
PIIX_FLAG_IGNORE_PCS,
|
||||
.pio_mask = 0x1f, /* pio0-4 */
|
||||
.mwdma_mask = 0x07, /* mwdma0-2 */
|
||||
.udma_mask = 0x7f, /* udma0-6 */
|
||||
|
@ -467,6 +468,11 @@ MODULE_LICENSE("GPL");
|
|||
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
static int force_pcs = 0;
|
||||
module_param(force_pcs, int, 0444);
|
||||
MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around "
|
||||
"device mis-detection (0=default, 1=ignore PCS, 2=honor PCS)");
|
||||
|
||||
/**
|
||||
* piix_pata_cbl_detect - Probe host controller cable detect info
|
||||
* @ap: Port for which cable detect info is desired
|
||||
|
@ -811,6 +817,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
|
|||
}
|
||||
|
||||
static void __devinit piix_init_pcs(struct pci_dev *pdev,
|
||||
struct ata_port_info *pinfo,
|
||||
const struct piix_map_db *map_db)
|
||||
{
|
||||
u16 pcs, new_pcs;
|
||||
|
@ -824,6 +831,18 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev,
|
|||
pci_write_config_word(pdev, ICH5_PCS, new_pcs);
|
||||
msleep(150);
|
||||
}
|
||||
|
||||
if (force_pcs == 1) {
|
||||
dev_printk(KERN_INFO, &pdev->dev,
|
||||
"force ignoring PCS (0x%x)\n", new_pcs);
|
||||
pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS;
|
||||
pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS;
|
||||
} else if (force_pcs == 2) {
|
||||
dev_printk(KERN_INFO, &pdev->dev,
|
||||
"force honoring PCS (0x%x)\n", new_pcs);
|
||||
pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS;
|
||||
pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS;
|
||||
}
|
||||
}
|
||||
|
||||
static void __devinit piix_init_sata_map(struct pci_dev *pdev,
|
||||
|
@ -932,7 +951,8 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
if (host_flags & ATA_FLAG_SATA) {
|
||||
piix_init_sata_map(pdev, port_info,
|
||||
piix_map_db_table[ent->driver_data]);
|
||||
piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]);
|
||||
piix_init_pcs(pdev, port_info,
|
||||
piix_map_db_table[ent->driver_data]);
|
||||
}
|
||||
|
||||
/* On ICH5, some BIOSen disable the interrupt using the
|
||||
|
|
|
@ -74,6 +74,7 @@ enum {
|
|||
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
||||
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
||||
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
||||
static void vt6420_error_handler(struct ata_port *ap);
|
||||
|
||||
static const struct pci_device_id svia_pci_tbl[] = {
|
||||
{ 0x1106, 0x0591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
|
||||
|
@ -108,7 +109,38 @@ static struct scsi_host_template svia_sht = {
|
|||
.bios_param = ata_std_bios_param,
|
||||
};
|
||||
|
||||
static const struct ata_port_operations svia_sata_ops = {
|
||||
static const struct ata_port_operations vt6420_sata_ops = {
|
||||
.port_disable = ata_port_disable,
|
||||
|
||||
.tf_load = ata_tf_load,
|
||||
.tf_read = ata_tf_read,
|
||||
.check_status = ata_check_status,
|
||||
.exec_command = ata_exec_command,
|
||||
.dev_select = ata_std_dev_select,
|
||||
|
||||
.bmdma_setup = ata_bmdma_setup,
|
||||
.bmdma_start = ata_bmdma_start,
|
||||
.bmdma_stop = ata_bmdma_stop,
|
||||
.bmdma_status = ata_bmdma_status,
|
||||
|
||||
.qc_prep = ata_qc_prep,
|
||||
.qc_issue = ata_qc_issue_prot,
|
||||
.data_xfer = ata_pio_data_xfer,
|
||||
|
||||
.freeze = ata_bmdma_freeze,
|
||||
.thaw = ata_bmdma_thaw,
|
||||
.error_handler = vt6420_error_handler,
|
||||
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||
|
||||
.irq_handler = ata_interrupt,
|
||||
.irq_clear = ata_bmdma_irq_clear,
|
||||
|
||||
.port_start = ata_port_start,
|
||||
.port_stop = ata_port_stop,
|
||||
.host_stop = ata_host_stop,
|
||||
};
|
||||
|
||||
static const struct ata_port_operations vt6421_sata_ops = {
|
||||
.port_disable = ata_port_disable,
|
||||
|
||||
.tf_load = ata_tf_load,
|
||||
|
@ -142,13 +174,13 @@ static const struct ata_port_operations svia_sata_ops = {
|
|||
.host_stop = ata_host_stop,
|
||||
};
|
||||
|
||||
static struct ata_port_info svia_port_info = {
|
||||
static struct ata_port_info vt6420_port_info = {
|
||||
.sht = &svia_sht,
|
||||
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
|
||||
.pio_mask = 0x1f,
|
||||
.mwdma_mask = 0x07,
|
||||
.udma_mask = 0x7f,
|
||||
.port_ops = &svia_sata_ops,
|
||||
.port_ops = &vt6420_sata_ops,
|
||||
};
|
||||
|
||||
MODULE_AUTHOR("Jeff Garzik");
|
||||
|
@ -171,6 +203,81 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|||
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
|
||||
}
|
||||
|
||||
/**
|
||||
* vt6420_prereset - prereset for vt6420
|
||||
* @ap: target ATA port
|
||||
*
|
||||
* SCR registers on vt6420 are pieces of shit and may hang the
|
||||
* whole machine completely if accessed with the wrong timing.
|
||||
* To avoid such catastrophe, vt6420 doesn't provide generic SCR
|
||||
* access operations, but uses SStatus and SControl only during
|
||||
* boot probing in controlled way.
|
||||
*
|
||||
* As the old (pre EH update) probing code is proven to work, we
|
||||
* strictly follow the access pattern.
|
||||
*
|
||||
* LOCKING:
|
||||
* Kernel thread context (may sleep)
|
||||
*
|
||||
* RETURNS:
|
||||
* 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int vt6420_prereset(struct ata_port *ap)
|
||||
{
|
||||
struct ata_eh_context *ehc = &ap->eh_context;
|
||||
unsigned long timeout = jiffies + (HZ * 5);
|
||||
u32 sstatus, scontrol;
|
||||
int online;
|
||||
|
||||
/* don't do any SCR stuff if we're not loading */
|
||||
if (!ATA_PFLAG_LOADING)
|
||||
goto skip_scr;
|
||||
|
||||
/* Resume phy. This is the old resume sequence from
|
||||
* __sata_phy_reset().
|
||||
*/
|
||||
svia_scr_write(ap, SCR_CONTROL, 0x300);
|
||||
svia_scr_read(ap, SCR_CONTROL); /* flush */
|
||||
|
||||
/* wait for phy to become ready, if necessary */
|
||||
do {
|
||||
msleep(200);
|
||||
if ((svia_scr_read(ap, SCR_STATUS) & 0xf) != 1)
|
||||
break;
|
||||
} while (time_before(jiffies, timeout));
|
||||
|
||||
/* open code sata_print_link_status() */
|
||||
sstatus = svia_scr_read(ap, SCR_STATUS);
|
||||
scontrol = svia_scr_read(ap, SCR_CONTROL);
|
||||
|
||||
online = (sstatus & 0xf) == 0x3;
|
||||
|
||||
ata_port_printk(ap, KERN_INFO,
|
||||
"SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
|
||||
online ? "up" : "down", sstatus, scontrol);
|
||||
|
||||
/* SStatus is read one more time */
|
||||
svia_scr_read(ap, SCR_STATUS);
|
||||
|
||||
if (!online) {
|
||||
/* tell EH to bail */
|
||||
ehc->i.action &= ~ATA_EH_RESET_MASK;
|
||||
return 0;
|
||||
}
|
||||
|
||||
skip_scr:
|
||||
/* wait for !BSY */
|
||||
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void vt6420_error_handler(struct ata_port *ap)
|
||||
{
|
||||
return ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset,
|
||||
NULL, ata_std_postreset);
|
||||
}
|
||||
|
||||
static const unsigned int svia_bar_sizes[] = {
|
||||
8, 4, 8, 4, 16, 256
|
||||
};
|
||||
|
@ -211,7 +318,7 @@ static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
|
|||
static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
|
||||
{
|
||||
struct ata_probe_ent *probe_ent;
|
||||
struct ata_port_info *ppi = &svia_port_info;
|
||||
struct ata_port_info *ppi = &vt6420_port_info;
|
||||
|
||||
probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
|
||||
if (!probe_ent)
|
||||
|
@ -240,7 +347,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
|
|||
|
||||
probe_ent->sht = &svia_sht;
|
||||
probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY;
|
||||
probe_ent->port_ops = &svia_sata_ops;
|
||||
probe_ent->port_ops = &vt6421_sata_ops;
|
||||
probe_ent->n_ports = N_PORTS;
|
||||
probe_ent->irq = pdev->irq;
|
||||
probe_ent->irq_flags = IRQF_SHARED;
|
||||
|
|
Loading…
Reference in a new issue