redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

pcmcia/staging: update comedi drivers 

Update comedi PCMCIA drivers to work with recent PCMCIA changes documented
in Documentation/pcmcia/driver-changes.txt:

- use pcmcia_config_loop()
- don't use PCMCIA_DEBUG, but use dev_dbg()
- don't use cs_error()
- re-use prod_id and card_id values already stored

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
wifi-calibration
Dominik Brodowski 2009-10-29 00:54:49 +01:00
parent 66024db57d
commit 55a19b39ac
7 changed files with 447 additions and 1058 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

222
drivers/staging/comedi/drivers/cb_das16_cs.c
View File

@ -141,37 +141,14 @@ static int das16cs_timer_insn_config(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data);
static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link)
{
tuple_t tuple;
u_short buf[128];
int prodid = 0;
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
(pcmcia_get_tuple_data(link, &tuple) == 0)) {
prodid = le16_to_cpu(buf[1]);
}
return prodid;
}
static const struct das16cs_board *das16cs_probe(struct comedi_device *dev,
struct pcmcia_device *link)
{
int id;
int i;
id = get_prodid(dev, link);
for (i = 0; i < n_boards; i++) {
if (das16cs_boards[i].device_id == id) {
if (das16cs_boards[i].device_id == link->card_id)
return das16cs_boards + i;
}
}
printk("unknown board!\n");
@ -660,27 +637,8 @@ static int das16cs_timer_insn_config(struct comedi_device *dev,
======================================================================*/
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"cb_das16_cs.c pcmcia code (David Schleef), modified from dummy_cs.c 1.31 2001/08/24 12:13:13 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
static void das16cs_pcmcia_config(struct pcmcia_device *link);
static void das16cs_pcmcia_release(struct pcmcia_device *link);
static int das16cs_pcmcia_suspend(struct pcmcia_device *p_dev);
@ -733,7 +691,7 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
DEBUG(0, "das16cs_pcmcia_attach()\n");
dev_dbg(&link->dev, "das16cs_pcmcia_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@ -760,7 +718,7 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
static void das16cs_pcmcia_detach(struct pcmcia_device *link)
{
DEBUG(0, "das16cs_pcmcia_detach(0x%p)\n", link);
dev_dbg(&link->dev, "das16cs_pcmcia_detach\n");
if (link->dev_node) {
((struct local_info_t *)link->priv)->stop = 1;
@ -771,118 +729,55 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* das16cs_pcmcia_detach */
static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
return -EINVAL;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
return pcmcia_request_io(p_dev, &p_dev->io);
}
return 0;
}
static void das16cs_pcmcia_config(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_fn, last_ret;
u_char buf[64];
cistpl_cftable_entry_t dflt = { 0 };
int ret;
DEBUG(0, "das16cs_pcmcia_config(0x%p)\n", link);
dev_dbg(&link->dev, "das16cs_pcmcia_config\n");
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
last_fn = GetFirstTuple;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret != 0)
goto cs_failed;
last_fn = GetTupleData;
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret != 0)
goto cs_failed;
last_fn = ParseTuple;
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret != 0)
goto cs_failed;
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
last_fn = GetFirstTuple;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret)
goto cs_failed;
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple))
goto next_entry;
if (pcmcia_parse_tuple(&tuple, &parse))
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Does this card need audio output? */
/* if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
*/
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(link, &link->io))
goto next_entry;
}
/* If we got this far, we're cool! */
break;
next_entry:
last_fn = GetNextTuple;
last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret)
goto cs_failed;
ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
/*
@ -891,21 +786,18 @@ next_entry:
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
last_fn = RequestIRQ;
last_ret = pcmcia_request_irq(link, &link->irq);
if (last_ret)
goto cs_failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
last_fn = RequestConfiguration;
last_ret = pcmcia_request_configuration(link, &link->conf);
if (last_ret)
goto cs_failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@ -930,14 +822,13 @@ next_entry:
return;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
das16cs_pcmcia_release(link);
} /* das16cs_pcmcia_config */
static void das16cs_pcmcia_release(struct pcmcia_device *link)
{
DEBUG(0, "das16cs_pcmcia_release(0x%p)\n", link);
dev_dbg(&link->dev, "das16cs_pcmcia_release\n");
pcmcia_disable_device(link);
} /* das16cs_pcmcia_release */
@ -983,14 +874,13 @@ struct pcmcia_driver das16cs_driver = {
static int __init init_das16cs_pcmcia_cs(void)
{
DEBUG(0, "%s\n", version);
pcmcia_register_driver(&das16cs_driver);
return 0;
}
static void __exit exit_das16cs_pcmcia_cs(void)
{
DEBUG(0, "das16cs_pcmcia_cs: unloading\n");
pr_debug("das16cs_pcmcia_cs: unloading\n");
pcmcia_unregister_driver(&das16cs_driver);
}

202
drivers/staging/comedi/drivers/das08_cs.c
View File

@ -110,25 +110,6 @@ static int das08_cs_attach(struct comedi_device *dev,
======================================================================*/
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static const char *version =
"das08.c pcmcia code (Frank Hess), modified from dummy_cs.c 1.31 2001/08/24 12:13:13 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
static void das08_pcmcia_config(struct pcmcia_device *link);
static void das08_pcmcia_release(struct pcmcia_device *link);
static int das08_pcmcia_suspend(struct pcmcia_device *p_dev);
@ -181,7 +162,7 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
DEBUG(0, "das08_pcmcia_attach()\n");
dev_dbg(&link->dev, "das08_pcmcia_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@ -224,7 +205,7 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
static void das08_pcmcia_detach(struct pcmcia_device *link)
{
DEBUG(0, "das08_pcmcia_detach(0x%p)\n", link);
dev_dbg(&link->dev, "das08_pcmcia_detach\n");
if (link->dev_node) {
((struct local_info_t *)link->priv)->stop = 1;
@ -237,6 +218,44 @@ static void das08_pcmcia_detach(struct pcmcia_device *link)
} /* das08_pcmcia_detach */
static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
return -ENODEV;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
return pcmcia_request_io(p_dev, &p_dev->io);
}
return 0;
}
/*======================================================================
das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event
@ -248,128 +267,20 @@ static void das08_pcmcia_detach(struct pcmcia_device *link)
static void das08_pcmcia_config(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_fn, last_ret;
u_char buf[64];
cistpl_cftable_entry_t dflt = { 0 };
int ret;
DEBUG(0, "das08_pcmcia_config(0x%p)\n", link);
dev_dbg(&link->dev, "das08_pcmcia_config\n");
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
last_fn = GetFirstTuple;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret)
goto cs_failed;
last_fn = GetTupleData;
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret)
goto cs_failed;
last_fn = ParseTuple;
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret)
goto cs_failed;
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
last_fn = GetFirstTuple;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret)
goto cs_failed;
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret)
goto next_entry;
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Does this card need audio output? */
/* if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
*/
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
/* If we got this far, we're cool! */
break;
next_entry:
last_fn = GetNextTuple;
last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret)
goto cs_failed;
ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
last_fn = RequestIRQ;
last_ret = pcmcia_request_irq(link, &link->irq);
if (last_ret)
goto cs_failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
@ -377,10 +288,9 @@ next_entry:
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
last_fn = RequestConfiguration;
last_ret = pcmcia_request_configuration(link, &link->conf);
if (last_ret)
goto cs_failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@ -405,8 +315,7 @@ next_entry:
return;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
das08_pcmcia_release(link);
} /* das08_pcmcia_config */
@ -421,7 +330,7 @@ cs_failed:
static void das08_pcmcia_release(struct pcmcia_device *link)
{
DEBUG(0, "das08_pcmcia_release(0x%p)\n", link);
dev_dbg(&link->dev, "das08_pcmcia_release\n");
pcmcia_disable_device(link);
} /* das08_pcmcia_release */
@ -477,14 +386,13 @@ struct pcmcia_driver das08_cs_driver = {
static int __init init_das08_pcmcia_cs(void)
{
DEBUG(0, "%s\n", version);
pcmcia_register_driver(&das08_cs_driver);
return 0;
}
static void __exit exit_das08_pcmcia_cs(void)
{
DEBUG(0, "das08_pcmcia_cs: unloading\n");
pr_debug("das08_pcmcia_cs: unloading\n");
pcmcia_unregister_driver(&das08_cs_driver);
}

246
drivers/staging/comedi/drivers/ni_daq_700.c
View File

@ -436,25 +436,7 @@ static int dio700_detach(struct comedi_device *dev)
return 0;
};
/* PCMCIA crap */
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = "ni_daq_700.c, based on dummy_cs.c";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/* PCMCIA crap -- watch your words, please! */
static void dio700_config(struct pcmcia_device *link);
static void dio700_release(struct pcmcia_device *link);
@ -510,7 +492,7 @@ static int dio700_cs_attach(struct pcmcia_device *link)
printk(KERN_INFO "ni_daq_700: cs-attach\n");
DEBUG(0, "dio700_cs_attach()\n");
dev_dbg(&link->dev, "dio700_cs_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@ -555,7 +537,7 @@ static void dio700_cs_detach(struct pcmcia_device *link)
printk(KERN_INFO "ni_daq_700: cs-detach!\n");
DEBUG(0, "dio700_cs_detach(0x%p)\n", link);
dev_dbg(&link->dev, "dio700_cs_detach\n");
if (link->dev_node) {
((struct local_info_t *)link->priv)->stop = 1;
@ -576,141 +558,85 @@ static void dio700_cs_detach(struct pcmcia_device *link)
======================================================================*/
static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
win_req_t *req = priv_data;
memreq_t map;
if (cfg->index == 0)
return -ENODEV;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
p_dev->conf.Status = CCSR_AUDIO_ENA;
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
return -ENODEV;
}
if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
req->Attributes |= WIN_ENABLE;
req->Base = mem->win[0].host_addr;
req->Size = mem->win[0].len;
if (req->Size < 0x1000)
req->Size = 0x1000;
req->AccessSpeed = 0;
if (pcmcia_request_window(&p_dev, req, &p_dev->win))
return -ENODEV;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(p_dev->win, &map))
return -ENODEV;
}
/* If we got this far, we're cool! */
return 0;
}
static void dio700_config(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_ret;
u_char buf[64];
win_req_t req;
memreq_t map;
cistpl_cftable_entry_t dflt = { 0 };
int ret;
printk(KERN_INFO "ni_daq_700: cs-config\n");
DEBUG(0, "dio700_config(0x%p)\n", link);
dev_dbg(&link->dev, "dio700_config\n");
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret) {
cs_error(link, GetTupleData, last_ret);
goto cs_failed;
}
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret) {
cs_error(link, ParseTuple, last_ret);
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret != 0) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple) != 0)
goto next_entry;
if (pcmcia_parse_tuple(&tuple, &parse) != 0)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
req.Attributes |= WIN_ENABLE;
req.Base = mem->win[0].host_addr;
req.Size = mem->win[0].len;
if (req.Size < 0x1000)
req.Size = 0x1000;
req.AccessSpeed = 0;
if (pcmcia_request_window(&link, &req, &link->win))
goto next_entry;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(link->win, &map))
goto next_entry;
}
/* If we got this far, we're cool! */
break;
next_entry:
last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetNextTuple, last_ret);
goto cs_failed;
}
ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, &req);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
/*
@ -719,11 +645,9 @@ next_entry:
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
last_ret = pcmcia_request_irq(link, &link->irq);
if (last_ret) {
cs_error(link, RequestIRQ, last_ret);
goto cs_failed;
}
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
@ -731,11 +655,9 @@ next_entry:
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
last_ret = pcmcia_request_configuration(link, &link->conf);
if (last_ret != 0) {
cs_error(link, RequestConfiguration, last_ret);
goto cs_failed;
}
ret = pcmcia_request_configuration(link, &link->conf);
if (ret != 0)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@ -763,7 +685,7 @@ next_entry:
return;
cs_failed:
failed:
printk(KERN_INFO "ni_daq_700 cs failed");
dio700_release(link);
@ -771,7 +693,7 @@ cs_failed:
static void dio700_release(struct pcmcia_device *link)
{
DEBUG(0, "dio700_release(0x%p)\n", link);
dev_dbg(&link->dev, "dio700_release\n");
pcmcia_disable_device(link);
} /* dio700_release */
@ -830,15 +752,13 @@ struct pcmcia_driver dio700_cs_driver = {
static int __init init_dio700_cs(void)
{
printk("ni_daq_700: cs-init \n");
DEBUG(0, "%s\n", version);
pcmcia_register_driver(&dio700_cs_driver);
return 0;
}
static void __exit exit_dio700_cs(void)
{
DEBUG(0, "ni_daq_700: unloading\n");
pr_debug("ni_daq_700: unloading\n");
pcmcia_unregister_driver(&dio700_cs_driver);
}

245
drivers/staging/comedi/drivers/ni_daq_dio24.c
View File

@ -187,25 +187,7 @@ static int dio24_detach(struct comedi_device *dev)
return 0;
};
/* PCMCIA crap */
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = "ni_daq_dio24.c, based on dummy_cs.c";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/* PCMCIA crap -- watch your words! */
static void dio24_config(struct pcmcia_device *link);
static void dio24_release(struct pcmcia_device *link);
@ -261,7 +243,7 @@ static int dio24_cs_attach(struct pcmcia_device *link)
printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - CS-attach!\n");
DEBUG(0, "dio24_cs_attach()\n");
dev_dbg(&link->dev, "dio24_cs_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@ -306,7 +288,7 @@ static void dio24_cs_detach(struct pcmcia_device *link)
printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - cs-detach!\n");
DEBUG(0, "dio24_cs_detach(0x%p)\n", link);
dev_dbg(&link->dev, "dio24_cs_detach\n");
if (link->dev_node) {
((struct local_info_t *)link->priv)->stop = 1;
@ -327,142 +309,85 @@ static void dio24_cs_detach(struct pcmcia_device *link)
======================================================================*/
static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
win_req_t *req = priv_data;
memreq_t map;
if (cfg->index == 0)
return -ENODEV;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
p_dev->conf.Status = CCSR_AUDIO_ENA;
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
return -ENODEV;
}
if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
req->Attributes |= WIN_ENABLE;
req->Base = mem->win[0].host_addr;
req->Size = mem->win[0].len;
if (req->Size < 0x1000)
req->Size = 0x1000;
req->AccessSpeed = 0;
if (pcmcia_request_window(&p_dev, req, &p_dev->win))
return -ENODEV;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(p_dev->win, &map))
return -ENODEV;
}
/* If we got this far, we're cool! */
return 0;
}
static void dio24_config(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_ret;
u_char buf[64];
int ret;
win_req_t req;
memreq_t map;
cistpl_cftable_entry_t dflt = { 0 };
printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
DEBUG(0, "dio24_config(0x%p)\n", link);
dev_dbg(&link->dev, "dio24_config\n");
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret) {
cs_error(link, GetTupleData, last_ret);
goto cs_failed;
}
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret) {
cs_error(link, ParseTuple, last_ret);
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple) != 0)
goto next_entry;
if (pcmcia_parse_tuple(&tuple, &parse) != 0)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
req.Attributes |= WIN_ENABLE;
req.Base = mem->win[0].host_addr;
req.Size = mem->win[0].len;
if (req.Size < 0x1000)
req.Size = 0x1000;
req.AccessSpeed = 0;
if (pcmcia_request_window(&link, &req, &link->win))
goto next_entry;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(link->win, &map))
goto next_entry;
}
/* If we got this far, we're cool! */
break;
next_entry:
last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetNextTuple, last_ret);
goto cs_failed;
}
ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
/*
@ -471,11 +396,9 @@ next_entry:
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
last_ret = pcmcia_request_irq(link, &link->irq);
if (last_ret) {
cs_error(link, RequestIRQ, last_ret);
goto cs_failed;
}
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
@ -483,11 +406,9 @@ next_entry:
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
last_ret = pcmcia_request_configuration(link, &link->conf);
if (last_ret) {
cs_error(link, RequestConfiguration, last_ret);
goto cs_failed;
}
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@ -515,7 +436,7 @@ next_entry:
return;
cs_failed:
failed:
printk(KERN_INFO "Fallo");
dio24_release(link);
@ -523,7 +444,7 @@ cs_failed:
static void dio24_release(struct pcmcia_device *link)
{
DEBUG(0, "dio24_release(0x%p)\n", link);
dev_dbg(&link->dev, "dio24_release\n");
pcmcia_disable_device(link);
} /* dio24_release */
@ -582,14 +503,12 @@ struct pcmcia_driver dio24_cs_driver = {
static int __init init_dio24_cs(void)
{
printk("ni_daq_dio24: HOLA SOY YO!\n");
DEBUG(0, "%s\n", version);
pcmcia_register_driver(&dio24_cs_driver);
return 0;
}
static void __exit exit_dio24_cs(void)
{
DEBUG(0, "ni_dio24: unloading\n");
pcmcia_unregister_driver(&dio24_cs_driver);
}

238
drivers/staging/comedi/drivers/ni_labpc_cs.c
View File

@ -153,23 +153,6 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return labpc_common_attach(dev, iobase, irq, 0);
}
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static const char *version =
"ni_labpc.c, based on dummy_cs.c 1.31 2001/08/24 12:13:13";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/*
@ -236,7 +219,7 @@ static int labpc_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
DEBUG(0, "labpc_cs_attach()\n");
dev_dbg(&link->dev, "labpc_cs_attach()\n");
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@ -278,7 +261,7 @@ static int labpc_cs_attach(struct pcmcia_device *link)
static void labpc_cs_detach(struct pcmcia_device *link)
{
DEBUG(0, "labpc_cs_detach(0x%p)\n", link);
dev_dbg(&link->dev, "labpc_cs_detach\n");
/*
If the device is currently configured and active, we won't
@ -305,135 +288,84 @@ static void labpc_cs_detach(struct pcmcia_device *link)
======================================================================*/
static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
win_req_t *req = priv_data;
memreq_t map;
if (cfg->index == 0)
return -ENODEV;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
p_dev->conf.Status = CCSR_AUDIO_ENA;
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
return -ENODEV;
}
if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
req->Attributes |= WIN_ENABLE;
req->Base = mem->win[0].host_addr;
req->Size = mem->win[0].len;
if (req->Size < 0x1000)
req->Size = 0x1000;
req->AccessSpeed = 0;
if (pcmcia_request_window(&p_dev, req, &p_dev->win))
return -ENODEV;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(p_dev->win, &map))
return -ENODEV;
}
/* If we got this far, we're cool! */
return 0;
}
static void labpc_config(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_ret;
u_char buf[64];
int ret;
win_req_t req;
memreq_t map;
cistpl_cftable_entry_t dflt = { 0 };
DEBUG(0, "labpc_config(0x%p)\n", link);
dev_dbg(&link->dev, "labpc_config\n");
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret) {
cs_error(link, GetTupleData, last_ret);
goto cs_failed;
}
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret) {
cs_error(link, ParseTuple, last_ret);
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple))
goto next_entry;
if (pcmcia_parse_tuple(&tuple, &parse))
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(link, &link->io))
goto next_entry;
}
if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
cistpl_mem_t *mem =
(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
req.Attributes |= WIN_ENABLE;
req.Base = mem->win[0].host_addr;
req.Size = mem->win[0].len;
if (req.Size < 0x1000)
req.Size = 0x1000;
req.AccessSpeed = 0;
link->win = (window_handle_t) link;
if (pcmcia_request_window(&link, &req, &link->win))
goto next_entry;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
if (pcmcia_map_mem_page(link->win, &map))
goto next_entry;
}
/* If we got this far, we're cool! */
break;
next_entry:
last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetNextTuple, last_ret);
goto cs_failed;
}
ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, &req);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
/*
@ -442,11 +374,9 @@ next_entry:
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
last_ret = pcmcia_request_irq(link, &link->irq);
if (last_ret) {
cs_error(link, RequestIRQ, last_ret);
goto cs_failed;
}
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
@ -454,11 +384,9 @@ next_entry:
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
last_ret = pcmcia_request_configuration(link, &link->conf);
if (last_ret) {
cs_error(link, RequestConfiguration, last_ret);
goto cs_failed;
}
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@ -486,14 +414,14 @@ next_entry:
return;
cs_failed:
failed:
labpc_release(link);
} /* labpc_config */
static void labpc_release(struct pcmcia_device *link)
{
DEBUG(0, "labpc_release(0x%p)\n", link);
dev_dbg(&link->dev, "labpc_release\n");
pcmcia_disable_device(link);
} /* labpc_release */
@ -551,14 +479,12 @@ struct pcmcia_driver labpc_cs_driver = {
static int __init init_labpc_cs(void)
{
DEBUG(0, "%s\n", version);
pcmcia_register_driver(&labpc_cs_driver);
return 0;
}
static void __exit exit_labpc_cs(void)
{
DEBUG(0, "ni_labpc: unloading\n");
pcmcia_unregister_driver(&labpc_cs_driver);
}

133
drivers/staging/comedi/drivers/ni_mio_cs.c
View File

@ -312,96 +312,50 @@ static int mio_cs_resume(struct pcmcia_device *link)
return 0;
}
static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
int base, ret;
p_dev->io.NumPorts1 = cfg->io.win[0].len;
p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
p_dev->io.NumPorts2 = 0;
p_dev->irq.IRQInfo1 = cfg->irq.IRQInfo1;
p_dev->irq.IRQInfo2 = cfg->irq.IRQInfo2;
for (base = 0x000; base < 0x400; base += 0x20) {
p_dev->io.BasePort1 = base;
ret = pcmcia_request_io(p_dev, &p_dev->io);
if (!ret)
return 0;
}
return -ENODEV;
}
static void mio_cs_config(struct pcmcia_device *link)
{
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
int manfid = 0, prodid = 0;
int ret;
DPRINTK("mio_cs_config(link=%p)\n", link);
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CONFIG;
ret = pcmcia_get_first_tuple(link, &tuple);
ret = pcmcia_get_tuple_data(link, &tuple);
ret = pcmcia_parse_tuple(&tuple, &parse);
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
#if 0
tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
info->multi(first_tuple(link, &tuple, &parse) == 0);
#endif
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
(pcmcia_get_tuple_data(link, &tuple) == 0)) {
manfid = le16_to_cpu(buf[0]);
prodid = le16_to_cpu(buf[1]);
}
/* printk("manfid = 0x%04x, 0x%04x\n",manfid,prodid); */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
ret = pcmcia_get_first_tuple(link, &tuple);
ret = pcmcia_get_tuple_data(link, &tuple);
ret = pcmcia_parse_tuple(&tuple, &parse);
#if 0
printk(" index: 0x%x\n", parse.cftable_entry.index);
printk(" flags: 0x%x\n", parse.cftable_entry.flags);
printk(" io flags: 0x%x\n", parse.cftable_entry.io.flags);
printk(" io nwin: 0x%x\n", parse.cftable_entry.io.nwin);
printk(" io base: 0x%x\n", parse.cftable_entry.io.win[0].base);
printk(" io len: 0x%x\n", parse.cftable_entry.io.win[0].len);
printk(" irq1: 0x%x\n", parse.cftable_entry.irq.IRQInfo1);
printk(" irq2: 0x%x\n", parse.cftable_entry.irq.IRQInfo2);
printk(" mem flags: 0x%x\n", parse.cftable_entry.mem.flags);
printk(" mem nwin: 0x%x\n", parse.cftable_entry.mem.nwin);
printk(" subtuples: 0x%x\n", parse.cftable_entry.subtuples);
#endif
#if 0
link->io.NumPorts1 = 0x20;
link->io.IOAddrLines = 5;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
#endif
link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
link->io.IOAddrLines =
parse.cftable_entry.io.flags & CISTPL_IO_LINES_MASK;
link->io.NumPorts2 = 0;
{
int base;
for (base = 0x000; base < 0x400; base += 0x20) {
link->io.BasePort1 = base;
ret = pcmcia_request_io(link, &link->io);
/* printk("RequestIO 0x%02x\n",ret); */
if (!ret)
break;
}
ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
return;
}
link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1;
link->irq.IRQInfo2 = parse.cftable_entry.irq.IRQInfo2;
ret = pcmcia_request_irq(link, &link->irq);
if (ret) {
printk("pcmcia_request_irq() returned error: %i\n", ret);
}
/* printk("RequestIRQ 0x%02x\n",ret); */
link->conf.ConfigIndex = 1;
ret = pcmcia_request_configuration(link, &link->conf);
/* printk("RequestConfiguration %d\n",ret); */
link->dev_node = &dev_node;
}
@ -475,40 +429,17 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return 0;
}
static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link)
{
tuple_t tuple;
u_short buf[128];
int prodid = 0;
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
(pcmcia_get_tuple_data(link, &tuple) == 0)) {
prodid = le16_to_cpu(buf[1]);
}
return prodid;
}
static int ni_getboardtype(struct comedi_device *dev,
struct pcmcia_device *link)
{
int id;
int i;
id = get_prodid(dev, link);
for (i = 0; i < n_ni_boards; i++) {
if (ni_boards[i].device_id == id) {
if (ni_boards[i].device_id == link->card_id)
return i;
}
}
printk("unknown board 0x%04x -- pretend it is a ", id);
printk("unknown board 0x%04x -- pretend it is a ", link->card_id);
return 0;
}

219
drivers/staging/comedi/drivers/quatech_daqp_cs.c
View File

@ -55,23 +55,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
/*
All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
you do not define PCMCIA_DEBUG at all, all the debug code will be
left out. If you compile with PCMCIA_DEBUG=0, the debug code will
be present but disabled -- but it can then be enabled for specific
modules at load time with a 'pc_debug=#' option to insmod.
*/
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0644);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = "quatech_daqp_cs.c 1.10 2003/04/21 (Brent Baccala)";
#else
#define DEBUG(n, args...)
#endif
/* Maximum number of separate DAQP devices we'll allow */
#define MAX_DEV 4
@ -863,8 +846,6 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
struct local_info_t *local = dev_table[it->options[0]];
tuple_t tuple;
int i;
struct comedi_subdevice *s;
if (it->options[0] < 0 || it->options[0] >= MAX_DEV || !local) {
@ -883,29 +864,10 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
strcpy(local->board_name, "DAQP");
dev->board_name = local->board_name;
tuple.DesiredTuple = CISTPL_VERS_1;
if (pcmcia_get_first_tuple(local->link, &tuple) == 0) {
u_char buf[128];
buf[0] = buf[sizeof(buf) - 1] = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 2;
if (pcmcia_get_tuple_data(local->link, &tuple) == 0) {
for (i = 0; i < tuple.TupleDataLen - 4; i++)
if (buf[i] == 0)
break;
for (i++; i < tuple.TupleDataLen - 4; i++)
if (buf[i] == 0)
break;
i++;
if ((i < tuple.TupleDataLen - 4)
&& (strncmp(buf + i, "DAQP", 4) == 0)) {
strncpy(local->board_name, buf + i,
sizeof(local->board_name));
}
if (local->link->prod_id[2]) {
if (strncmp(local->link->prod_id[2], "DAQP", 4) == 0) {
strncpy(local->board_name, local->link->prod_id[2],
sizeof(local->board_name));
}
}
@ -1058,7 +1020,7 @@ static int daqp_cs_attach(struct pcmcia_device *link)
struct local_info_t *local;
int i;
DEBUG(0, "daqp_cs_attach()\n");
dev_dbg(&link->dev, "daqp_cs_attach()\n");
for (i = 0; i < MAX_DEV; i++)
if (dev_table[i] == NULL)
@ -1112,7 +1074,7 @@ static void daqp_cs_detach(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
DEBUG(0, "daqp_cs_detach(0x%p)\n", link);
dev_dbg(&link->dev, "daqp_cs_detach\n");
if (link->dev_node) {
dev->stop = 1;
@ -1134,115 +1096,54 @@ static void daqp_cs_detach(struct pcmcia_device *link)
======================================================================*/
static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
return -ENODEV;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
return pcmcia_request_io(p_dev, &p_dev->io);
}
static void daqp_cs_config(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_ret;
u_char buf[64];
int ret;
DEBUG(0, "daqp_cs_config(0x%p)\n", link);
dev_dbg(&link->dev, "daqp_cs_config\n");
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
last_ret = pcmcia_get_tuple_data(link, &tuple);
if (last_ret) {
cs_error(link, GetTupleData, last_ret);
goto cs_failed;
}
last_ret = pcmcia_parse_tuple(&tuple, &parse);
if (last_ret) {
cs_error(link, ParseTuple, last_ret);
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
last_ret = pcmcia_get_first_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetFirstTuple, last_ret);
goto cs_failed;
}
while (1) {
cistpl_cftable_entry_t dflt = { 0 };
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple))
goto next_entry;
if (pcmcia_parse_tuple(&tuple, &parse))
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
if (pcmcia_request_io(link, &link->io))
goto next_entry;
/* If we got this far, we're cool! */
break;
next_entry:
last_ret = pcmcia_get_next_tuple(link, &tuple);
if (last_ret) {
cs_error(link, GetNextTuple, last_ret);
goto cs_failed;
}
ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL);
if (ret) {
dev_warn(&link->dev, "no configuration found\n");
goto failed;
}
/*
@ -1251,11 +1152,9 @@ next_entry:
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
last_ret = pcmcia_request_irq(link, &link->irq);
if (last_ret) {
cs_error(link, RequestIRQ, last_ret);
goto cs_failed;
}
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
@ -1263,11 +1162,9 @@ next_entry:
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
last_ret = pcmcia_request_configuration(link, &link->conf);
if (last_ret) {
cs_error(link, RequestConfiguration, last_ret);
goto cs_failed;
}
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@ -1296,14 +1193,14 @@ next_entry:
return;
cs_failed:
failed:
daqp_cs_release(link);
} /* daqp_cs_config */
static void daqp_cs_release(struct pcmcia_device *link)
{
DEBUG(0, "daqp_cs_release(0x%p)\n", link);
dev_dbg(&link->dev, "daqp_cs_release\n");
pcmcia_disable_device(link);
} /* daqp_cs_release */
@ -1363,7 +1260,6 @@ struct pcmcia_driver daqp_cs_driver = {
int __init init_module(void)
{
DEBUG(0, "%s\n", version);
pcmcia_register_driver(&daqp_cs_driver);
comedi_driver_register(&driver_daqp);
return 0;
@ -1371,7 +1267,6 @@ int __init init_module(void)
void __exit cleanup_module(void)
{
DEBUG(0, "daqp_cs: unloading\n");
comedi_driver_unregister(&driver_daqp);
pcmcia_unregister_driver(&daqp_cs_driver);
}