EXYNOS5250: Add support cpufreq for EXYNOS5250
This patch adds support cpufreq for EXYNOS5250 SoC. Basically, the exynos-cpufreq.c is used commonly and exynos5250-cpufreq.c is used for EXYNOS5250(two Cortex-A15 cores) SoC. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dave Jones <davej@redhat.com>
This commit is contained in:
parent
a35c50510d
commit
562a6cbe1c
|
@ -33,3 +33,4 @@ struct exynos_dvfs_info {
|
|||
|
||||
extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
|
||||
extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
|
||||
extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
|
||||
|
|
|
@ -48,6 +48,7 @@ config ARM_EXYNOS_CPUFREQ
|
|||
depends on ARCH_EXYNOS
|
||||
select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210
|
||||
select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412)
|
||||
select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250
|
||||
default y
|
||||
help
|
||||
This adds the CPUFreq driver common part for Samsung
|
||||
|
@ -67,3 +68,9 @@ config ARM_EXYNOS4X12_CPUFREQ
|
|||
help
|
||||
This adds the CPUFreq driver for Samsung EXYNOS4X12
|
||||
SoC (EXYNOS4212 or EXYNOS4412).
|
||||
|
||||
config ARM_EXYNOS5250_CPUFREQ
|
||||
bool "Samsung EXYNOS5250"
|
||||
help
|
||||
This adds the CPUFreq driver for Samsung EXYNOS5250
|
||||
SoC.
|
||||
|
|
|
@ -46,6 +46,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
|
|||
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
|
||||
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
|
||||
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
|
||||
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
|
||||
obj-$(CONFIG_ARCH_OMAP2PLUS) += omap-cpufreq.o
|
||||
|
||||
##################################################################################
|
||||
|
|
|
@ -256,6 +256,8 @@ static int __init exynos_cpufreq_init(void)
|
|||
ret = exynos4210_cpufreq_init(exynos_info);
|
||||
else if (soc_is_exynos4212() || soc_is_exynos4412())
|
||||
ret = exynos4x12_cpufreq_init(exynos_info);
|
||||
else if (soc_is_exynos5250())
|
||||
ret = exynos5250_cpufreq_init(exynos_info);
|
||||
else
|
||||
pr_err("%s: CPU type not found\n", __func__);
|
||||
|
||||
|
|
347
drivers/cpufreq/exynos5250-cpufreq.c
Normal file
347
drivers/cpufreq/exynos5250-cpufreq.c
Normal file
|
@ -0,0 +1,347 @@
|
|||
/*
|
||||
* Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* EXYNOS5250 - CPU frequency scaling support
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/cpufreq.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/cpufreq.h>
|
||||
|
||||
#define CPUFREQ_LEVEL_END (L15 + 1)
|
||||
|
||||
static int max_support_idx;
|
||||
static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
|
||||
static struct clk *cpu_clk;
|
||||
static struct clk *moutcore;
|
||||
static struct clk *mout_mpll;
|
||||
static struct clk *mout_apll;
|
||||
|
||||
struct cpufreq_clkdiv {
|
||||
unsigned int index;
|
||||
unsigned int clkdiv;
|
||||
unsigned int clkdiv1;
|
||||
};
|
||||
|
||||
static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END];
|
||||
|
||||
static struct cpufreq_frequency_table exynos5250_freq_table[] = {
|
||||
{L0, 1700 * 1000},
|
||||
{L1, 1600 * 1000},
|
||||
{L2, 1500 * 1000},
|
||||
{L3, 1400 * 1000},
|
||||
{L4, 1300 * 1000},
|
||||
{L5, 1200 * 1000},
|
||||
{L6, 1100 * 1000},
|
||||
{L7, 1000 * 1000},
|
||||
{L8, 900 * 1000},
|
||||
{L9, 800 * 1000},
|
||||
{L10, 700 * 1000},
|
||||
{L11, 600 * 1000},
|
||||
{L12, 500 * 1000},
|
||||
{L13, 400 * 1000},
|
||||
{L14, 300 * 1000},
|
||||
{L15, 200 * 1000},
|
||||
{0, CPUFREQ_TABLE_END},
|
||||
};
|
||||
|
||||
static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END];
|
||||
|
||||
static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = {
|
||||
/*
|
||||
* Clock divider value for following
|
||||
* { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 }
|
||||
*/
|
||||
{ 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1700 MHz - N/A */
|
||||
{ 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1600 MHz - N/A */
|
||||
{ 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1500 MHz - N/A */
|
||||
{ 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1400 MHz */
|
||||
{ 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1300 MHz */
|
||||
{ 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1200 MHz */
|
||||
{ 0, 2, 7, 7, 5, 1, 2, 0 }, /* 1100 MHz */
|
||||
{ 0, 2, 7, 7, 4, 1, 2, 0 }, /* 1000 MHz */
|
||||
{ 0, 2, 7, 7, 4, 1, 2, 0 }, /* 900 MHz */
|
||||
{ 0, 2, 7, 7, 3, 1, 1, 0 }, /* 800 MHz */
|
||||
{ 0, 1, 7, 7, 3, 1, 1, 0 }, /* 700 MHz */
|
||||
{ 0, 1, 7, 7, 2, 1, 1, 0 }, /* 600 MHz */
|
||||
{ 0, 1, 7, 7, 2, 1, 1, 0 }, /* 500 MHz */
|
||||
{ 0, 1, 7, 7, 1, 1, 1, 0 }, /* 400 MHz */
|
||||
{ 0, 1, 7, 7, 1, 1, 1, 0 }, /* 300 MHz */
|
||||
{ 0, 1, 7, 7, 1, 1, 1, 0 }, /* 200 MHz */
|
||||
};
|
||||
|
||||
static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = {
|
||||
/* Clock divider value for following
|
||||
* { COPY, HPM }
|
||||
*/
|
||||
{ 0, 2 }, /* 1700 MHz - N/A */
|
||||
{ 0, 2 }, /* 1600 MHz - N/A */
|
||||
{ 0, 2 }, /* 1500 MHz - N/A */
|
||||
{ 0, 2 }, /* 1400 MHz */
|
||||
{ 0, 2 }, /* 1300 MHz */
|
||||
{ 0, 2 }, /* 1200 MHz */
|
||||
{ 0, 2 }, /* 1100 MHz */
|
||||
{ 0, 2 }, /* 1000 MHz */
|
||||
{ 0, 2 }, /* 900 MHz */
|
||||
{ 0, 2 }, /* 800 MHz */
|
||||
{ 0, 2 }, /* 700 MHz */
|
||||
{ 0, 2 }, /* 600 MHz */
|
||||
{ 0, 2 }, /* 500 MHz */
|
||||
{ 0, 2 }, /* 400 MHz */
|
||||
{ 0, 2 }, /* 300 MHz */
|
||||
{ 0, 2 }, /* 200 MHz */
|
||||
};
|
||||
|
||||
static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = {
|
||||
(0), /* 1700 MHz - N/A */
|
||||
(0), /* 1600 MHz - N/A */
|
||||
(0), /* 1500 MHz - N/A */
|
||||
(0), /* 1400 MHz */
|
||||
((325 << 16) | (6 << 8) | 0), /* 1300 MHz */
|
||||
((200 << 16) | (4 << 8) | 0), /* 1200 MHz */
|
||||
((275 << 16) | (6 << 8) | 0), /* 1100 MHz */
|
||||
((125 << 16) | (3 << 8) | 0), /* 1000 MHz */
|
||||
((150 << 16) | (4 << 8) | 0), /* 900 MHz */
|
||||
((100 << 16) | (3 << 8) | 0), /* 800 MHz */
|
||||
((175 << 16) | (3 << 8) | 1), /* 700 MHz */
|
||||
((200 << 16) | (4 << 8) | 1), /* 600 MHz */
|
||||
((125 << 16) | (3 << 8) | 1), /* 500 MHz */
|
||||
((100 << 16) | (3 << 8) | 1), /* 400 MHz */
|
||||
((200 << 16) | (4 << 8) | 2), /* 300 MHz */
|
||||
((100 << 16) | (3 << 8) | 2), /* 200 MHz */
|
||||
};
|
||||
|
||||
/* ASV group voltage table */
|
||||
static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = {
|
||||
0, 0, 0, 0, 0, 0, 0, /* 1700 MHz ~ 1100 MHz Not supported */
|
||||
1175000, 1125000, 1075000, 1050000, 1000000,
|
||||
950000, 925000, 925000, 900000
|
||||
};
|
||||
|
||||
static void set_clkdiv(unsigned int div_index)
|
||||
{
|
||||
unsigned int tmp;
|
||||
|
||||
/* Change Divider - CPU0 */
|
||||
|
||||
tmp = exynos5250_clkdiv_table[div_index].clkdiv;
|
||||
|
||||
__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
|
||||
|
||||
while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
|
||||
cpu_relax();
|
||||
|
||||
/* Change Divider - CPU1 */
|
||||
tmp = exynos5250_clkdiv_table[div_index].clkdiv1;
|
||||
|
||||
__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
|
||||
|
||||
while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
|
||||
cpu_relax();
|
||||
}
|
||||
|
||||
static void set_apll(unsigned int new_index,
|
||||
unsigned int old_index)
|
||||
{
|
||||
unsigned int tmp, pdiv;
|
||||
|
||||
/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
|
||||
clk_set_parent(moutcore, mout_mpll);
|
||||
|
||||
do {
|
||||
cpu_relax();
|
||||
tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
|
||||
tmp &= 0x7;
|
||||
} while (tmp != 0x2);
|
||||
|
||||
/* 2. Set APLL Lock time */
|
||||
pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f);
|
||||
|
||||
__raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
|
||||
|
||||
/* 3. Change PLL PMS values */
|
||||
tmp = __raw_readl(EXYNOS5_APLL_CON0);
|
||||
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
|
||||
tmp |= exynos5_apll_pms_table[new_index];
|
||||
__raw_writel(tmp, EXYNOS5_APLL_CON0);
|
||||
|
||||
/* 4. wait_lock_time */
|
||||
do {
|
||||
cpu_relax();
|
||||
tmp = __raw_readl(EXYNOS5_APLL_CON0);
|
||||
} while (!(tmp & (0x1 << 29)));
|
||||
|
||||
/* 5. MUX_CORE_SEL = APLL */
|
||||
clk_set_parent(moutcore, mout_apll);
|
||||
|
||||
do {
|
||||
cpu_relax();
|
||||
tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
|
||||
tmp &= (0x7 << 16);
|
||||
} while (tmp != (0x1 << 16));
|
||||
|
||||
}
|
||||
|
||||
bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
|
||||
{
|
||||
unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8);
|
||||
unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8);
|
||||
|
||||
return (old_pm == new_pm) ? 0 : 1;
|
||||
}
|
||||
|
||||
static void exynos5250_set_frequency(unsigned int old_index,
|
||||
unsigned int new_index)
|
||||
{
|
||||
unsigned int tmp;
|
||||
|
||||
if (old_index > new_index) {
|
||||
if (!exynos5250_pms_change(old_index, new_index)) {
|
||||
/* 1. Change the system clock divider values */
|
||||
set_clkdiv(new_index);
|
||||
/* 2. Change just s value in apll m,p,s value */
|
||||
tmp = __raw_readl(EXYNOS5_APLL_CON0);
|
||||
tmp &= ~(0x7 << 0);
|
||||
tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
|
||||
__raw_writel(tmp, EXYNOS5_APLL_CON0);
|
||||
|
||||
} else {
|
||||
/* Clock Configuration Procedure */
|
||||
/* 1. Change the system clock divider values */
|
||||
set_clkdiv(new_index);
|
||||
/* 2. Change the apll m,p,s value */
|
||||
set_apll(new_index, old_index);
|
||||
}
|
||||
} else if (old_index < new_index) {
|
||||
if (!exynos5250_pms_change(old_index, new_index)) {
|
||||
/* 1. Change just s value in apll m,p,s value */
|
||||
tmp = __raw_readl(EXYNOS5_APLL_CON0);
|
||||
tmp &= ~(0x7 << 0);
|
||||
tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
|
||||
__raw_writel(tmp, EXYNOS5_APLL_CON0);
|
||||
/* 2. Change the system clock divider values */
|
||||
set_clkdiv(new_index);
|
||||
} else {
|
||||
/* Clock Configuration Procedure */
|
||||
/* 1. Change the apll m,p,s value */
|
||||
set_apll(new_index, old_index);
|
||||
/* 2. Change the system clock divider values */
|
||||
set_clkdiv(new_index);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void __init set_volt_table(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
exynos5250_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
exynos5250_freq_table[L1].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
exynos5250_freq_table[L2].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
exynos5250_freq_table[L3].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
exynos5250_freq_table[L4].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
exynos5250_freq_table[L5].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
exynos5250_freq_table[L6].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
|
||||
max_support_idx = L7;
|
||||
|
||||
for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
|
||||
exynos5250_volt_table[i] = asv_voltage_5250[i];
|
||||
}
|
||||
|
||||
int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
|
||||
{
|
||||
int i;
|
||||
unsigned int tmp;
|
||||
unsigned long rate;
|
||||
|
||||
set_volt_table();
|
||||
|
||||
cpu_clk = clk_get(NULL, "armclk");
|
||||
if (IS_ERR(cpu_clk))
|
||||
return PTR_ERR(cpu_clk);
|
||||
|
||||
moutcore = clk_get(NULL, "mout_cpu");
|
||||
if (IS_ERR(moutcore))
|
||||
goto err_moutcore;
|
||||
|
||||
mout_mpll = clk_get(NULL, "mout_mpll");
|
||||
if (IS_ERR(mout_mpll))
|
||||
goto err_mout_mpll;
|
||||
|
||||
rate = clk_get_rate(mout_mpll) / 1000;
|
||||
|
||||
mout_apll = clk_get(NULL, "mout_apll");
|
||||
if (IS_ERR(mout_apll))
|
||||
goto err_mout_apll;
|
||||
|
||||
for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
|
||||
|
||||
exynos5250_clkdiv_table[i].index = i;
|
||||
|
||||
tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
|
||||
|
||||
tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) |
|
||||
(0x7 << 12) | (0x7 << 16) | (0x7 << 20) |
|
||||
(0x7 << 24) | (0x7 << 28));
|
||||
|
||||
tmp |= ((clkdiv_cpu0_5250[i][0] << 0) |
|
||||
(clkdiv_cpu0_5250[i][1] << 4) |
|
||||
(clkdiv_cpu0_5250[i][2] << 8) |
|
||||
(clkdiv_cpu0_5250[i][3] << 12) |
|
||||
(clkdiv_cpu0_5250[i][4] << 16) |
|
||||
(clkdiv_cpu0_5250[i][5] << 20) |
|
||||
(clkdiv_cpu0_5250[i][6] << 24) |
|
||||
(clkdiv_cpu0_5250[i][7] << 28));
|
||||
|
||||
exynos5250_clkdiv_table[i].clkdiv = tmp;
|
||||
|
||||
tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
|
||||
|
||||
tmp &= ~((0x7 << 0) | (0x7 << 4));
|
||||
|
||||
tmp |= ((clkdiv_cpu1_5250[i][0] << 0) |
|
||||
(clkdiv_cpu1_5250[i][1] << 4));
|
||||
|
||||
exynos5250_clkdiv_table[i].clkdiv1 = tmp;
|
||||
}
|
||||
|
||||
info->mpll_freq_khz = rate;
|
||||
/* 1000Mhz */
|
||||
info->pm_lock_idx = L7;
|
||||
/* 800Mhz */
|
||||
info->pll_safe_idx = L9;
|
||||
info->max_support_idx = max_support_idx;
|
||||
info->min_support_idx = min_support_idx;
|
||||
info->cpu_clk = cpu_clk;
|
||||
info->volt_table = exynos5250_volt_table;
|
||||
info->freq_table = exynos5250_freq_table;
|
||||
info->set_freq = exynos5250_set_frequency;
|
||||
info->need_apll_change = exynos5250_pms_change;
|
||||
|
||||
return 0;
|
||||
|
||||
err_mout_apll:
|
||||
clk_put(mout_mpll);
|
||||
err_mout_mpll:
|
||||
clk_put(moutcore);
|
||||
err_moutcore:
|
||||
clk_put(cpu_clk);
|
||||
|
||||
pr_err("%s: failed initialization\n", __func__);
|
||||
return -EINVAL;
|
||||
}
|
||||
EXPORT_SYMBOL(exynos5250_cpufreq_init);
|
Loading…
Reference in a new issue