diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index aabb8542a55d..284faec30a7a 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -43,3 +43,12 @@ config RMI4_F12
 	  Function 12 provides 2D multifinger pointing for touchscreens and
 	  touchpads. For sensors that support relative pointing, F12 also
 	  provides mouse input.
+
+config RMI4_F30
+	bool "RMI4 Function 30 (GPIO LED)"
+	depends on RMI4_CORE
+	help
+	  Say Y here if you want to add support for RMI4 function 30.
+
+	  Function 30 provides GPIO and LED support for RMI4 devices. This
+	  includes support for buttons on TouchPads and ClickPads.
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
index d01e703304c3..ad7156d8252c 100644
--- a/drivers/input/rmi4/Makefile
+++ b/drivers/input/rmi4/Makefile
@@ -6,6 +6,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
 # Function drivers
 rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
 rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
+rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
 
 # Transports
 obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index a3d766118b61..b368b0515c5a 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -312,6 +312,9 @@ static struct rmi_function_handler *fn_handlers[] = {
 #ifdef CONFIG_RMI4_F12
 	&rmi_f12_handler,
 #endif
+#ifdef CONFIG_RMI4_F30
+	&rmi_f30_handler,
+#endif
 };
 
 static void __rmi_unregister_function_handlers(int start_idx)
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index ed9127daf5a2..6e140fa3cce1 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -101,4 +101,5 @@ char *rmi_f01_get_product_ID(struct rmi_function *fn);
 extern struct rmi_function_handler rmi_f01_handler;
 extern struct rmi_function_handler rmi_f11_handler;
 extern struct rmi_function_handler rmi_f12_handler;
+extern struct rmi_function_handler rmi_f30_handler;
 #endif
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
new file mode 100644
index 000000000000..760aff1bc420
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -0,0 +1,407 @@
+/*
+ * Copyright (c) 2012-2016 Synaptics Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define RMI_F30_QUERY_SIZE			2
+
+/* Defs for Query 0 */
+#define RMI_F30_EXTENDED_PATTERNS		0x01
+#define RMI_F30_HAS_MAPPABLE_BUTTONS		(1 << 1)
+#define RMI_F30_HAS_LED			(1 << 2)
+#define RMI_F30_HAS_GPIO			(1 << 3)
+#define RMI_F30_HAS_HAPTIC			(1 << 4)
+#define RMI_F30_HAS_GPIO_DRV_CTL		(1 << 5)
+#define RMI_F30_HAS_MECH_MOUSE_BTNS		(1 << 6)
+
+/* Defs for Query 1 */
+#define RMI_F30_GPIO_LED_COUNT			0x1F
+
+/* Defs for Control Registers */
+#define RMI_F30_CTRL_1_GPIO_DEBOUNCE		0x01
+#define RMI_F30_CTRL_1_HALT			(1 << 4)
+#define RMI_F30_CTRL_1_HALTED			(1 << 5)
+#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS	0x03
+
+struct rmi_f30_ctrl_data {
+	int address;
+	int length;
+	u8 *regs;
+};
+
+#define RMI_F30_CTRL_MAX_REGS		32
+#define RMI_F30_CTRL_MAX_BYTES		((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
+#define RMI_F30_CTRL_MAX_REG_BLOCKS	11
+
+#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES		\
+					+ 1				\
+					+ RMI_F30_CTRL_MAX_BYTES	\
+					+ RMI_F30_CTRL_MAX_BYTES	\
+					+ RMI_F30_CTRL_MAX_BYTES	\
+					+ 6				\
+					+ RMI_F30_CTRL_MAX_REGS		\
+					+ RMI_F30_CTRL_MAX_REGS		\
+					+ RMI_F30_CTRL_MAX_BYTES	\
+					+ 1				\
+					+ 1)
+
+struct f30_data {
+	/* Query Data */
+	bool has_extended_pattern;
+	bool has_mappable_buttons;
+	bool has_led;
+	bool has_gpio;
+	bool has_haptic;
+	bool has_gpio_driver_control;
+	bool has_mech_mouse_btns;
+	u8 gpioled_count;
+
+	u8 register_count;
+
+	/* Control Register Data */
+	struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS];
+	u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE];
+	u32 ctrl_regs_size;
+
+	u8 data_regs[RMI_F30_CTRL_MAX_BYTES];
+	u16 *gpioled_key_map;
+
+	struct input_dev *input;
+};
+
+static int rmi_f30_read_control_parameters(struct rmi_function *fn,
+						struct f30_data *f30)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int error = 0;
+
+	error = rmi_read_block(rmi_dev, fn->fd.control_base_addr,
+				f30->ctrl_regs, f30->ctrl_regs_size);
+	if (error) {
+		dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n",
+			__func__, fn->fd.control_base_addr, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int retval;
+	int gpiled = 0;
+	int value = 0;
+	int i;
+	int reg_num;
+
+	if (!f30->input)
+		return 0;
+
+	/* Read the gpi led data. */
+	if (rmi_dev->xport->attn_data) {
+		memcpy(f30->data_regs, rmi_dev->xport->attn_data,
+			f30->register_count);
+		rmi_dev->xport->attn_data += f30->register_count;
+		rmi_dev->xport->attn_size -= f30->register_count;
+	} else {
+		retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
+			f30->data_regs, f30->register_count);
+
+		if (retval) {
+			dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
+				__func__);
+			return retval;
+		}
+	}
+
+	for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
+		for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
+			++gpiled) {
+			if (f30->gpioled_key_map[gpiled] != 0) {
+				/* buttons have pull up resistors */
+				value = (((f30->data_regs[reg_num] >> i) & 0x01)
+									== 0);
+
+				rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+					"%s: call input report key (0x%04x) value (0x%02x)",
+					__func__,
+					f30->gpioled_key_map[gpiled], value);
+				input_report_key(f30->input,
+						 f30->gpioled_key_map[gpiled],
+						 value);
+			}
+
+		}
+	}
+
+	return 0;
+}
+
+static int rmi_f30_register_device(struct rmi_function *fn)
+{
+	int i;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+	struct input_dev *input_dev;
+	int button_count = 0;
+
+	input_dev = drv_data->input;
+	if (!input_dev) {
+		dev_info(&fn->dev, "F30: no input device found, ignoring.\n");
+		return -EINVAL;
+	}
+
+	f30->input = input_dev;
+
+	set_bit(EV_KEY, input_dev->evbit);
+
+	input_dev->keycode = f30->gpioled_key_map;
+	input_dev->keycodesize = sizeof(u16);
+	input_dev->keycodemax = f30->gpioled_count;
+
+	for (i = 0; i < f30->gpioled_count; i++) {
+		if (f30->gpioled_key_map[i] != 0) {
+			input_set_capability(input_dev, EV_KEY,
+						f30->gpioled_key_map[i]);
+			button_count++;
+		}
+	}
+
+	if (button_count == 1)
+		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+	return 0;
+}
+
+static int rmi_f30_config(struct rmi_function *fn)
+{
+	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+	struct rmi_driver *drv = fn->rmi_dev->driver;
+	const struct rmi_device_platform_data *pdata =
+				rmi_get_platform_data(fn->rmi_dev);
+	int error;
+
+	if (pdata->f30_data && pdata->f30_data->disable) {
+		drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
+	} else {
+		/* Write Control Register values back to device */
+		error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
+					f30->ctrl_regs, f30->ctrl_regs_size);
+		if (error) {
+			dev_err(&fn->rmi_dev->dev,
+				"%s : Could not write control registers at 0x%x error (%d)\n",
+				__func__, fn->fd.control_base_addr, error);
+			return error;
+		}
+
+		drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+	}
+	return 0;
+}
+
+static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
+					int *ctrl_addr, int len, u8 **reg)
+{
+	ctrl->address = *ctrl_addr;
+	ctrl->length = len;
+	ctrl->regs = *reg;
+	*ctrl_addr += len;
+	*reg += len;
+}
+
+static inline bool rmi_f30_is_valid_button(int button,
+		struct rmi_f30_ctrl_data *ctrl)
+{
+	int byte_position = button >> 3;
+	int bit_position = button & 0x07;
+
+	/*
+	 * ctrl2 -> dir == 0 -> input mode
+	 * ctrl3 -> data == 1 -> actual button
+	 */
+	return !(ctrl[2].regs[byte_position] & BIT(bit_position)) &&
+		(ctrl[3].regs[byte_position] & BIT(bit_position));
+}
+
+static inline int rmi_f30_initialize(struct rmi_function *fn)
+{
+	struct f30_data *f30;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	const struct rmi_device_platform_data *pdata;
+	int retval = 0;
+	int control_address;
+	int i;
+	int button;
+	u8 buf[RMI_F30_QUERY_SIZE];
+	u8 *ctrl_reg;
+	u8 *map_memory;
+
+	f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
+			   GFP_KERNEL);
+	if (!f30)
+		return -ENOMEM;
+
+	dev_set_drvdata(&fn->dev, f30);
+
+	retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
+				RMI_F30_QUERY_SIZE);
+
+	if (retval) {
+		dev_err(&fn->dev, "Failed to read query register.\n");
+		return retval;
+	}
+
+	f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
+	f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS;
+	f30->has_led = buf[0] & RMI_F30_HAS_LED;
+	f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO;
+	f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC;
+	f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL;
+	f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
+	f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
+
+	f30->register_count = (f30->gpioled_count + 7) >> 3;
+
+	control_address = fn->fd.control_base_addr;
+	ctrl_reg = f30->ctrl_regs;
+
+	if (f30->has_gpio && f30->has_led)
+		rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
+					f30->register_count, &ctrl_reg);
+
+	rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8),
+				&ctrl_reg);
+
+	if (f30->has_gpio) {
+		rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
+					f30->register_count, &ctrl_reg);
+
+		rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
+					f30->register_count, &ctrl_reg);
+	}
+
+	if (f30->has_led) {
+		int ctrl5_len;
+
+		rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
+					f30->register_count, &ctrl_reg);
+
+		if (f30->has_extended_pattern)
+			ctrl5_len = 6;
+		else
+			ctrl5_len = 2;
+
+		rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
+					ctrl5_len, &ctrl_reg);
+	}
+
+	if (f30->has_led || f30->has_gpio_driver_control) {
+		/* control 6 uses a byte per gpio/led */
+		rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
+					f30->gpioled_count, &ctrl_reg);
+	}
+
+	if (f30->has_mappable_buttons) {
+		/* control 7 uses a byte per gpio/led */
+		rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
+					f30->gpioled_count, &ctrl_reg);
+	}
+
+	if (f30->has_haptic) {
+		rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
+					f30->register_count, &ctrl_reg);
+
+		rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
+					sizeof(u8), &ctrl_reg);
+	}
+
+	if (f30->has_mech_mouse_btns)
+		rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
+					sizeof(u8), &ctrl_reg);
+
+	f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs
+				?: RMI_F30_CTRL_REGS_MAX_SIZE;
+
+	retval = rmi_f30_read_control_parameters(fn, f30);
+	if (retval < 0) {
+		dev_err(&fn->dev,
+			"Failed to initialize F19 control params.\n");
+		return retval;
+	}
+
+	map_memory = devm_kzalloc(&fn->dev,
+				  (f30->gpioled_count * (sizeof(u16))),
+				  GFP_KERNEL);
+	if (!map_memory) {
+		dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
+		return -ENOMEM;
+	}
+
+	f30->gpioled_key_map = (u16 *)map_memory;
+
+	pdata = rmi_get_platform_data(rmi_dev);
+	if (pdata && f30->has_gpio) {
+		button = BTN_LEFT;
+		for (i = 0; i < f30->gpioled_count; i++) {
+			if (rmi_f30_is_valid_button(i, f30->ctrl)) {
+				f30->gpioled_key_map[i] = button++;
+
+				/*
+				 * buttonpad might be given by
+				 * f30->has_mech_mouse_btns, but I am
+				 * not sure, so use only the pdata info
+				 */
+				if (pdata->f30_data &&
+				    pdata->f30_data->buttonpad)
+					break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int rmi_f30_probe(struct rmi_function *fn)
+{
+	int rc;
+	const struct rmi_device_platform_data *pdata =
+				rmi_get_platform_data(fn->rmi_dev);
+
+	if (pdata->f30_data && pdata->f30_data->disable)
+		return 0;
+
+	rc = rmi_f30_initialize(fn);
+	if (rc < 0)
+		goto error_exit;
+
+	rc = rmi_f30_register_device(fn);
+	if (rc < 0)
+		goto error_exit;
+
+	return 0;
+
+error_exit:
+	return rc;
+
+}
+
+struct rmi_function_handler rmi_f30_handler = {
+	.driver = {
+		.name = "rmi4_f30",
+	},
+	.func = 0x30,
+	.probe = rmi_f30_probe,
+	.config = rmi_f30_config,
+	.attention = rmi_f30_attention,
+};
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index b527064bac47..ac89d1e731dc 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -101,6 +101,21 @@ struct rmi_2d_sensor_platform_data {
 	int dmax;
 };
 
+/**
+ * struct rmi_f30_data - overrides defaults for a single F30 GPIOs/LED chip.
+ * @buttonpad - the touchpad is a buttonpad, so enable only the first actual
+ * button that is found.
+ * @trackstick_buttons - Set when the function 30 is handling the physical
+ * buttons of the trackstick (as a PD/2 passthrough device.
+ * @disable - the touchpad incorrectly reports F30 and it should be ignored.
+ * This is a special case which is due to misconfigured firmware.
+ */
+struct rmi_f30_data {
+	bool buttonpad;
+	bool trackstick_buttons;
+	bool disable;
+};
+
 /**
  * struct rmi_f01_power - override default power management settings.
  *
@@ -147,6 +162,7 @@ struct rmi_device_platform_data {
 	/* function handler pdata */
 	struct rmi_2d_sensor_platform_data *sensor_pdata;
 	struct rmi_f01_power_management power_management;
+	struct rmi_f30_data *f30_data;
 };
 
 /**