Introduce 8250_men_mcb
This patch introduces the 8250_men_mcb driver for the MEN 16Z125 IP-Core. This is a 16550-type UART with a 60 byte FIFO. Due to strange old hardware, every board using this IP core requires different values for uartclk. A reasonable default is included in addition to the support of three boards. Additional values for other boards will be added later. This v2 has some whitespace fixes, I screwed this up yesterday. Signed-off-by: Michael Moese <michael.moese@men.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
2ce8008711
commit
562e6ef81f
118
drivers/tty/serial/8250/8250_men_mcb.c
Normal file
118
drivers/tty/serial/8250/8250_men_mcb.c
Normal file
|
@ -0,0 +1,118 @@
|
|||
#include <linux/device.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mcb.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <uapi/linux/serial_core.h>
|
||||
|
||||
struct serial_8250_men_mcb_data {
|
||||
struct uart_8250_port uart;
|
||||
int line;
|
||||
};
|
||||
|
||||
/*
|
||||
* The Z125 16550-compatible UART has no fixed base clock assigned
|
||||
* So, depending on the board we're on, we need to adjust the
|
||||
* parameter in order to really set the correct baudrate, and
|
||||
* do so if possible without user interaction
|
||||
*/
|
||||
static u32 men_z125_lookup_uartclk(struct mcb_device *mdev)
|
||||
{
|
||||
/* use default value if board is not available below */
|
||||
u32 clkval = 1041666;
|
||||
|
||||
dev_info(&mdev->dev, "%s on board %s\n",
|
||||
dev_name(&mdev->dev),
|
||||
mdev->bus->name);
|
||||
if (strncmp(mdev->bus->name, "F075", 4) == 0)
|
||||
clkval = 1041666;
|
||||
else if (strncmp(mdev->bus->name, "F216", 4) == 0)
|
||||
clkval = 1843200;
|
||||
else if (strncmp(mdev->bus->name, "G215", 4) == 0)
|
||||
clkval = 1843200;
|
||||
else
|
||||
dev_info(&mdev->dev,
|
||||
"board not detected, using default uartclk\n");
|
||||
|
||||
clkval = clkval << 4;
|
||||
|
||||
return clkval;
|
||||
}
|
||||
|
||||
static int serial_8250_men_mcb_probe(struct mcb_device *mdev,
|
||||
const struct mcb_device_id *id)
|
||||
{
|
||||
struct serial_8250_men_mcb_data *data;
|
||||
struct resource *mem;
|
||||
|
||||
data = devm_kzalloc(&mdev->dev,
|
||||
sizeof(struct serial_8250_men_mcb_data),
|
||||
GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
mcb_set_drvdata(mdev, data);
|
||||
data->uart.port.dev = mdev->dma_dev;
|
||||
spin_lock_init(&data->uart.port.lock);
|
||||
|
||||
data->uart.port.type = PORT_16550;
|
||||
data->uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
|
||||
data->uart.port.iotype = UPIO_MEM;
|
||||
data->uart.port.uartclk = men_z125_lookup_uartclk(mdev);
|
||||
data->uart.port.regshift = 0;
|
||||
data->uart.port.fifosize = 60;
|
||||
|
||||
mem = mcb_get_resource(mdev, IORESOURCE_MEM);
|
||||
if (mem == NULL)
|
||||
return -ENXIO;
|
||||
|
||||
data->uart.port.irq = mcb_get_irq(mdev);
|
||||
|
||||
data->uart.port.membase = devm_ioremap_resource(&mdev->dev, mem);
|
||||
if (IS_ERR(data->uart.port.membase))
|
||||
return PTR_ERR_OR_ZERO(data->uart.port.membase);
|
||||
|
||||
data->uart.port.mapbase = (unsigned long) mem->start;
|
||||
data->uart.port.iobase = data->uart.port.mapbase;
|
||||
|
||||
/* ok, register the port */
|
||||
data->line = serial8250_register_8250_port(&data->uart);
|
||||
if (data->line < 0)
|
||||
return data->line;
|
||||
|
||||
dev_info(&mdev->dev, "found 16Z125 UART: ttyS%d\n", data->line);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void serial_8250_men_mcb_remove(struct mcb_device *mdev)
|
||||
{
|
||||
struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev);
|
||||
|
||||
if (data)
|
||||
serial8250_unregister_port(data->line);
|
||||
}
|
||||
|
||||
static const struct mcb_device_id serial_8250_men_mcb_ids[] = {
|
||||
{ .device = 0x7d },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids);
|
||||
|
||||
static struct mcb_driver mcb_driver = {
|
||||
.driver = {
|
||||
.name = "8250_men_mcb",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = serial_8250_men_mcb_probe,
|
||||
.remove = serial_8250_men_mcb_remove,
|
||||
.id_table = serial_8250_men_mcb_ids,
|
||||
};
|
||||
module_mcb_driver(mcb_driver);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_DESCRIPTION("MEN 16z125 8250 UART driver");
|
||||
MODULE_AUTHOR("Michael Moese <michael.moese@men.de");
|
||||
MODULE_ALIAS("mcb:16z125");
|
|
@ -155,6 +155,17 @@ config SERIAL_8250_CS
|
|||
|
||||
If unsure, say N.
|
||||
|
||||
config SERIAL_8250_MEN_MCB
|
||||
tristate "MEN Z125 UART device support"
|
||||
depends on MCB && SERIAL_8250
|
||||
help
|
||||
This enables support for FPGA based UARTs found on many MEN
|
||||
boards. This driver enables support for the Z125 UARTs.
|
||||
|
||||
To compile this driver as a module, chose M here: the
|
||||
module will be called 8250_men_mcb.
|
||||
|
||||
|
||||
config SERIAL_8250_NR_UARTS
|
||||
int "Maximum number of 8250/16550 serial ports"
|
||||
depends on SERIAL_8250
|
||||
|
|
|
@ -23,6 +23,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
|
|||
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
|
||||
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
|
||||
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
|
||||
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
|
||||
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
|
||||
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
|
||||
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
|
||||
|
|
Loading…
Reference in a new issue