iio: accel: Add driver for dmard10 3-axis Accelerometer
Add a driver for the Domintech ARD10 3-axis Accelerometer, based on the android driver found here: https://github.com/domintech/dmard10 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
34cf779d3c
commit
569906e203
|
@ -39,6 +39,7 @@ dallas,ds75 Digital Thermometer and Thermostat
|
|||
dlg,da9053 DA9053: flexible system level PMIC with multicore support
|
||||
dlg,da9063 DA9063: system PMIC for quad-core application processors
|
||||
domintech,dmard09 DMARD09: 3-axis Accelerometer
|
||||
domintech,dmard10 DMARD10: 3-axis Accelerometer
|
||||
epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
|
||||
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
|
||||
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
|
||||
|
|
|
@ -73,6 +73,16 @@ config DMARD09
|
|||
Choosing M will build the driver as a module. If so, the module
|
||||
will be called dmard09.
|
||||
|
||||
config DMARD10
|
||||
tristate "Domintech DMARD10 3-axis Accelerometer Driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to get support for the Domintech DMARD10 3-axis
|
||||
accelerometer.
|
||||
|
||||
Choosing M will build the driver as a module. If so, the module
|
||||
will be called dmard10.
|
||||
|
||||
config HID_SENSOR_ACCEL_3D
|
||||
depends on HID_SENSOR_HUB
|
||||
select IIO_BUFFER
|
||||
|
|
|
@ -10,6 +10,7 @@ obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
|
|||
obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
|
||||
obj-$(CONFIG_DMARD06) += dmard06.o
|
||||
obj-$(CONFIG_DMARD09) += dmard09.o
|
||||
obj-$(CONFIG_DMARD10) += dmard10.o
|
||||
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
|
||||
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
|
||||
obj-$(CONFIG_KXSD9) += kxsd9.o
|
||||
|
|
266
drivers/iio/accel/dmard10.c
Normal file
266
drivers/iio/accel/dmard10.c
Normal file
|
@ -0,0 +1,266 @@
|
|||
/**
|
||||
* IIO driver for the 3-axis accelerometer Domintech ARD10.
|
||||
*
|
||||
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
|
||||
* Copyright (c) 2012 Domintech Technology Co., Ltd
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
#include <linux/byteorder/generic.h>
|
||||
|
||||
#define DMARD10_REG_ACTR 0x00
|
||||
#define DMARD10_REG_AFEM 0x0c
|
||||
#define DMARD10_REG_STADR 0x12
|
||||
#define DMARD10_REG_STAINT 0x1c
|
||||
#define DMARD10_REG_MISC2 0x1f
|
||||
#define DMARD10_REG_PD 0x21
|
||||
|
||||
#define DMARD10_MODE_OFF 0x00
|
||||
#define DMARD10_MODE_STANDBY 0x02
|
||||
#define DMARD10_MODE_ACTIVE 0x06
|
||||
#define DMARD10_MODE_READ_OTP 0x12
|
||||
#define DMARD10_MODE_RESET_DATA_PATH 0x82
|
||||
|
||||
/* AFEN set 1, ATM[2:0]=b'000 (normal), EN_Z/Y/X/T=1 */
|
||||
#define DMARD10_VALUE_AFEM_AFEN_NORMAL 0x8f
|
||||
/* ODR[3:0]=b'0111 (100Hz), CCK[3:0]=b'0100 (204.8kHZ) */
|
||||
#define DMARD10_VALUE_CKSEL_ODR_100_204 0x74
|
||||
/* INTC[6:5]=b'00 */
|
||||
#define DMARD10_VALUE_INTC 0x00
|
||||
/* TAP1/TAP2 Average 2 */
|
||||
#define DMARD10_VALUE_TAPNS_AVE_2 0x11
|
||||
|
||||
#define DMARD10_VALUE_STADR 0x55
|
||||
#define DMARD10_VALUE_STAINT 0xaa
|
||||
#define DMARD10_VALUE_MISC2_OSCA_EN 0x08
|
||||
#define DMARD10_VALUE_PD_RST 0x52
|
||||
|
||||
/* Offsets into the buffer read in dmard10_read_raw() */
|
||||
#define DMARD10_X_OFFSET 1
|
||||
#define DMARD10_Y_OFFSET 2
|
||||
#define DMARD10_Z_OFFSET 3
|
||||
|
||||
/*
|
||||
* a value of + or -128 corresponds to + or - 1G
|
||||
* scale = 9.81 / 128 = 0.076640625
|
||||
*/
|
||||
|
||||
static const int dmard10_nscale = 76640625;
|
||||
|
||||
#define DMARD10_CHANNEL(reg, axis) { \
|
||||
.type = IIO_ACCEL, \
|
||||
.address = reg, \
|
||||
.modified = 1, \
|
||||
.channel2 = IIO_MOD_##axis, \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec dmard10_channels[] = {
|
||||
DMARD10_CHANNEL(DMARD10_X_OFFSET, X),
|
||||
DMARD10_CHANNEL(DMARD10_Y_OFFSET, Y),
|
||||
DMARD10_CHANNEL(DMARD10_Z_OFFSET, Z),
|
||||
};
|
||||
|
||||
struct dmard10_data {
|
||||
struct i2c_client *client;
|
||||
};
|
||||
|
||||
/* Init sequence taken from the android driver */
|
||||
static int dmard10_reset(struct i2c_client *client)
|
||||
{
|
||||
unsigned char buffer[7];
|
||||
int ret;
|
||||
|
||||
/* 1. Powerdown reset */
|
||||
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_PD,
|
||||
DMARD10_VALUE_PD_RST);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* 2. ACTR => Standby mode => Download OTP to parameter reg =>
|
||||
* Standby mode => Reset data path => Standby mode
|
||||
*/
|
||||
buffer[0] = DMARD10_REG_ACTR;
|
||||
buffer[1] = DMARD10_MODE_STANDBY;
|
||||
buffer[2] = DMARD10_MODE_READ_OTP;
|
||||
buffer[3] = DMARD10_MODE_STANDBY;
|
||||
buffer[4] = DMARD10_MODE_RESET_DATA_PATH;
|
||||
buffer[5] = DMARD10_MODE_STANDBY;
|
||||
ret = i2c_master_send(client, buffer, 6);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* 3. OSCA_EN = 1, TSTO = b'000 (INT1 = normal, TEST0 = normal) */
|
||||
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_MISC2,
|
||||
DMARD10_VALUE_MISC2_OSCA_EN);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* 4. AFEN = 1 (AFE will powerdown after ADC) */
|
||||
buffer[0] = DMARD10_REG_AFEM;
|
||||
buffer[1] = DMARD10_VALUE_AFEM_AFEN_NORMAL;
|
||||
buffer[2] = DMARD10_VALUE_CKSEL_ODR_100_204;
|
||||
buffer[3] = DMARD10_VALUE_INTC;
|
||||
buffer[4] = DMARD10_VALUE_TAPNS_AVE_2;
|
||||
buffer[5] = 0x00; /* DLYC, no delay timing */
|
||||
buffer[6] = 0x07; /* INTD=1 push-pull, INTA=1 active high, AUTOT=1 */
|
||||
ret = i2c_master_send(client, buffer, 7);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* 5. Activation mode */
|
||||
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_ACTR,
|
||||
DMARD10_MODE_ACTIVE);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Shutdown sequence taken from the android driver */
|
||||
static int dmard10_shutdown(struct i2c_client *client)
|
||||
{
|
||||
unsigned char buffer[3];
|
||||
|
||||
buffer[0] = DMARD10_REG_ACTR;
|
||||
buffer[1] = DMARD10_MODE_STANDBY;
|
||||
buffer[2] = DMARD10_MODE_OFF;
|
||||
|
||||
return i2c_master_send(client, buffer, 3);
|
||||
}
|
||||
|
||||
static int dmard10_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct dmard10_data *data = iio_priv(indio_dev);
|
||||
__le16 buf[4];
|
||||
int ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
/*
|
||||
* Read 8 bytes starting at the REG_STADR register, trying to
|
||||
* read the individual X, Y, Z registers will always read 0.
|
||||
*/
|
||||
ret = i2c_smbus_read_i2c_block_data(data->client,
|
||||
DMARD10_REG_STADR,
|
||||
sizeof(buf), (u8 *)buf);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = le16_to_cpu(buf[chan->address]);
|
||||
*val = sign_extend32(ret, 12);
|
||||
return IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
*val = 0;
|
||||
*val2 = dmard10_nscale;
|
||||
return IIO_VAL_INT_PLUS_NANO;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_info dmard10_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.read_raw = dmard10_read_raw,
|
||||
};
|
||||
|
||||
static int dmard10_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret;
|
||||
struct iio_dev *indio_dev;
|
||||
struct dmard10_data *data;
|
||||
|
||||
/* These 2 registers have special POR reset values used for id */
|
||||
ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STADR);
|
||||
if (ret != DMARD10_VALUE_STADR)
|
||||
return (ret < 0) ? ret : -ENODEV;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STAINT);
|
||||
if (ret != DMARD10_VALUE_STAINT)
|
||||
return (ret < 0) ? ret : -ENODEV;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev) {
|
||||
dev_err(&client->dev, "iio allocation failed!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
data->client = client;
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &dmard10_info;
|
||||
indio_dev->name = "dmard10";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = dmard10_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(dmard10_channels);
|
||||
|
||||
ret = dmard10_reset(client);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = iio_device_register(indio_dev);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "device_register failed\n");
|
||||
dmard10_shutdown(client);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int dmard10_remove(struct i2c_client *client)
|
||||
{
|
||||
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
|
||||
return dmard10_shutdown(client);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int dmard10_suspend(struct device *dev)
|
||||
{
|
||||
return dmard10_shutdown(to_i2c_client(dev));
|
||||
}
|
||||
|
||||
static int dmard10_resume(struct device *dev)
|
||||
{
|
||||
return dmard10_reset(to_i2c_client(dev));
|
||||
}
|
||||
#endif
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(dmard10_pm_ops, dmard10_suspend, dmard10_resume);
|
||||
|
||||
static const struct i2c_device_id dmard10_i2c_id[] = {
|
||||
{"dmard10", 0},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, dmard10_i2c_id);
|
||||
|
||||
static struct i2c_driver dmard10_driver = {
|
||||
.driver = {
|
||||
.name = "dmard10",
|
||||
.pm = &dmard10_pm_ops,
|
||||
},
|
||||
.probe = dmard10_probe,
|
||||
.remove = dmard10_remove,
|
||||
.id_table = dmard10_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(dmard10_driver);
|
||||
|
||||
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
||||
MODULE_DESCRIPTION("Domintech ARD10 3-Axis Accelerometer driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in a new issue