diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 97b20aa0b36c..283ded7747a9 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -175,6 +175,7 @@ config DA9150_GPADC
 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
+	depends on HAS_IOMEM
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series
 	  of SoCs for drivers such as the touchscreen and hwmon to use to share
@@ -207,6 +208,7 @@ config INA2XX_ADC
 config IMX7D_ADC
 	tristate "IMX7D ADC driver"
 	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
 	help
 	  Say yes here to build support for IMX7D ADC.
 
diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
index 1165b1c4f9d6..cfc5a051ab9f 100644
--- a/drivers/iio/humidity/dht11.c
+++ b/drivers/iio/humidity/dht11.c
@@ -117,7 +117,7 @@ static int dht11_decode(struct dht11 *dht11, int offset, int timeres)
 	if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum)
 		return -EIO;
 
-	dht11->timestamp = ktime_get_real_ns();
+	dht11->timestamp = ktime_get_boot_ns();
 	if (hum_int < 20) {  /* DHT22 */
 		dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) *
 					((temp_int & 0x80) ? -100 : 100);
@@ -145,7 +145,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
 
 	/* TODO: Consider making the handler safe for IRQ sharing */
 	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
-		dht11->edges[dht11->num_edges].ts = ktime_get_real_ns();
+		dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
 		dht11->edges[dht11->num_edges++].value =
 						gpio_get_value(dht11->gpio);
 
@@ -164,7 +164,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 	int ret, timeres;
 
 	mutex_lock(&dht11->lock);
-	if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_real_ns()) {
+	if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) {
 		timeres = ktime_get_resolution_ns();
 		if (DHT11_DATA_BIT_HIGH < 2 * timeres) {
 			dev_err(dht11->dev, "timeresolution %dns too low\n",
@@ -279,7 +279,7 @@ static int dht11_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	dht11->timestamp = ktime_get_real_ns() - DHT11_DATA_VALID_TIME - 1;
+	dht11->timestamp = ktime_get_boot_ns() - DHT11_DATA_VALID_TIME - 1;
 	dht11->num_edges = -1;
 
 	platform_set_drvdata(pdev, iio);
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 48fbc0bc7e2a..8f8d1370ed8b 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -5,9 +5,9 @@
 config INV_MPU6050_IIO
 	tristate "Invensense MPU6050 devices"
 	depends on I2C && SYSFS
+	depends on I2C_MUX
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
-	select I2C_MUX
 	help
 	  This driver supports the Invensense MPU6050 devices.
 	  This driver can also support MPU6500 in MPU6050 compatibility mode
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index 93e29fb67fa0..db35e04a0637 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -87,7 +87,7 @@ static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
 
 	ret = i2c_transfer(client->adapter, msg, 2);
 
-	return (ret == 2) ? 0 : ret;
+	return (ret == 2) ? 0 : -EIO;
 }
 
 static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 58d4517e1836..b9519be90fda 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -6,6 +6,7 @@ menu "Analog to digital converters"
 config AD7606
 	tristate "Analog Devices AD7606 ADC driver"
 	depends on GPIOLIB || COMPILE_TEST
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help