From bb58596f6802a4959c2cea02acd272245e671c1d Mon Sep 17 00:00:00 2001 From: Dave C Boutcher Date: Tue, 15 Nov 2005 09:53:00 -0600 Subject: [PATCH 01/28] [SCSI] ibmvscsi kexec fix This makes ibmvscsi work correctly with the recent set of kexec patches that went in. This is based on work by Michael Ellerman, who chased this initially. He validated that it works during kexec. Handle kexec correctly in ibmvscsi. During kexec the adapter will not get cleaned up correctly, so we may need to reset it to make it sane again. Signed-off-by: Dave Boutcher Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.h | 2 +- drivers/scsi/ibmvscsi/iseries_vscsi.c | 3 ++- drivers/scsi/ibmvscsi/rpa_vscsi.c | 8 +++++++- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h index 8bec0438dc8a..5b0edd1f1921 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.h +++ b/drivers/scsi/ibmvscsi/ibmvscsi.h @@ -100,7 +100,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, void ibmvscsi_release_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata, int max_requests); -void ibmvscsi_reset_crq_queue(struct crq_queue *queue, +int ibmvscsi_reset_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata); void ibmvscsi_handle_crq(struct viosrp_crq *crq, diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c index 1045872b0175..ce15d9e39621 100644 --- a/drivers/scsi/ibmvscsi/iseries_vscsi.c +++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c @@ -117,9 +117,10 @@ void ibmvscsi_release_crq_queue(struct crq_queue *queue, * * no-op for iSeries */ -void ibmvscsi_reset_crq_queue(struct crq_queue *queue, +int ibmvscsi_reset_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata) { + return 0; } /** diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c index 8bf5652f1060..75db2f5c545e 100644 --- a/drivers/scsi/ibmvscsi/rpa_vscsi.c +++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c @@ -230,6 +230,11 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address, queue->msg_token, PAGE_SIZE); + if (rc == H_Resource) + /* maybe kexecing and resource is busy. try a reset */ + rc = ibmvscsi_reset_crq_queue(queue, + hostdata); + if (rc == 2) { /* Adapter is good, but other end is not ready */ printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n"); @@ -281,7 +286,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, * @hostdata: ibmvscsi_host_data of host * */ -void ibmvscsi_reset_crq_queue(struct crq_queue *queue, +int ibmvscsi_reset_crq_queue(struct crq_queue *queue, struct ibmvscsi_host_data *hostdata) { int rc; @@ -309,4 +314,5 @@ void ibmvscsi_reset_crq_queue(struct crq_queue *queue, printk(KERN_WARNING "ibmvscsi: couldn't register crq--rc 0x%x\n", rc); } + return rc; } From 23443b1d6130eff8e1335e4f84eaf0577a331dcf Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 6 Dec 2005 10:57:06 -0800 Subject: [PATCH 02/28] [SCSI] qla2xxx: Correct mis-handling of AENs. A regression in a recent change 33135aa2a568ec1a30e734f18e5315e10516e4f3 caused the driver to mistakenly drop handling of AENs. Due to the incorrect handling, ports would not reappear after RSCNs and LIPs. Drops unused/incorrect compound #define from qla_def.h. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 10 +--------- drivers/scsi/qla2xxx/qla_init.c | 6 +++--- 2 files changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7096945ea234..7b3efd531297 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2476,17 +2476,9 @@ typedef struct scsi_qla_host { */ #define LOOP_TRANSITION(ha) \ (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \ - test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) - -#define LOOP_NOT_READY(ha) \ - ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \ - test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || \ - test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ - test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \ + test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ atomic_read(&ha->loop_state) == LOOP_DOWN) -#define LOOP_RDY(ha) (!LOOP_NOT_READY(ha)) - #define TGT_Q(ha, t) (ha->otgt[t]) #define to_qla_host(x) ((scsi_qla_host_t *) (x)->hostdata) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2d720121a0d3..c46d2469b85f 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1259,7 +1259,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) rval = qla2x00_get_adapter_id(ha, &loop_id, &al_pa, &area, &domain, &topo); if (rval != QLA_SUCCESS) { - if (LOOP_NOT_READY(ha) || atomic_read(&ha->loop_down_timer) || + if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) || (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) { DEBUG2(printk("%s(%ld) Loop is in a transition state\n", __func__, ha->host_no)); @@ -1796,7 +1796,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha) } if (rval == QLA_SUCCESS && test_bit(RSCN_UPDATE, &flags)) { - if (LOOP_NOT_READY(ha)) { + if (LOOP_TRANSITION(ha)) { rval = QLA_FUNCTION_FAILED; } else { rval = qla2x00_configure_fabric(ha); @@ -2369,7 +2369,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) if (qla2x00_is_reserved_id(ha, loop_id)) continue; - if (atomic_read(&ha->loop_down_timer) || LOOP_NOT_READY(ha)) + if (atomic_read(&ha->loop_down_timer) || LOOP_TRANSITION(ha)) break; if (swl != NULL) { From 0da69df1e54146eece38e0a144051f6dd3526821 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 6 Dec 2005 10:58:06 -0800 Subject: [PATCH 03/28] [SCSI] qla2xxx: Correct short-WRITE status handling. Properly check FC_RESID for any non-transfered bytes regardless of firmware completion status. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 09afc0f06bd4..5181d966fecb 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -909,6 +909,21 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) resid = resid_len; cp->resid = resid; CMD_RESID_LEN(cp) = resid; + + if (!lscsi_status && + ((unsigned)(cp->request_bufflen - resid) < + cp->underflow)) { + qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): Mid-layer underflow " + "detected (%x of %x bytes)...returning " + "error status.\n", ha->host_no, + cp->device->channel, cp->device->id, + cp->device->lun, resid, + cp->request_bufflen); + + cp->result = DID_ERROR << 16; + break; + } } cp->result = DID_OK << 16 | lscsi_status; From f0353301e6752399ceb874ede7f44e3571c5e4f3 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 7 Dec 2005 17:46:57 -0500 Subject: [PATCH 04/28] [SCSI] Fix incorrect pointer in megaraid.c MODE_SENSE emulation The SCSI megaraid drive goes to great effort to kmap the scatterlist buffer (if used), but then uses the wrong pointer when copying to it afterward. Signed-off-by: Mark Lord Acked by: Ju, Seokmann Signed-off-by: James Bottomley --- drivers/scsi/megaraid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index f9792528e33f..578143e93a6f 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -664,7 +664,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy) sg->offset; } else buf = cmd->request_buffer; - memset(cmd->request_buffer, 0, cmd->cmnd[4]); + memset(buf, 0, cmd->cmnd[4]); if (cmd->use_sg) { struct scatterlist *sg; From 85631672e6a8032267058b4ccbe53f1924a5d0be Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Wed, 7 Dec 2005 21:46:27 -0600 Subject: [PATCH 05/28] [SCSI] fix OOPS due to clearing eh_action prior to aborting eh command The eh_action semaphore in scsi_eh_send_command is cleared after a command timeout. The command is subsequently aborted and the abort will try to call scsi_done() on it. Unfortunately, the scsi_eh_done() routine unconditinally completes the semaphore (which is now null). Fix this race by makiong the scsi_eh_done() routine check that the semaphore is non null before completing it (mirroring the ordinary command done/timeout logic). Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 18c5d2523014..c0ae9e965f6f 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -422,10 +422,15 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) **/ static void scsi_eh_done(struct scsi_cmnd *scmd) { + struct completion *eh_action; + SCSI_LOG_ERROR_RECOVERY(3, printk("%s scmd: %p result: %x\n", __FUNCTION__, scmd, scmd->result)); - complete(scmd->device->host->eh_action); + + eh_action = scmd->device->host->eh_action; + if (eh_action) + complete(eh_action); } /** From a8c730e85e80734412f4f73ab28496a0e8b04a7b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 9 Dec 2005 14:42:16 +0100 Subject: [PATCH 06/28] [SCSI] fix panic when ejecting ieee1394 ipod The scsi_library routines don't correctly set DMA_NONE when req->data_len is zero (instead they check the command type first, so if it's write, we end up with req->data_len == 0 and direction as DMA_TO_DEVICE which confuses some drivers) Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 4afef5cdcb17..097888721ec4 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1215,12 +1215,12 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) } else { memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); cmd->cmd_len = req->cmd_len; - if (rq_data_dir(req) == WRITE) - cmd->sc_data_direction = DMA_TO_DEVICE; - else if (req->data_len) - cmd->sc_data_direction = DMA_FROM_DEVICE; - else + if (!req->data_len) cmd->sc_data_direction = DMA_NONE; + else if (rq_data_dir(req) == WRITE) + cmd->sc_data_direction = DMA_TO_DEVICE; + else + cmd->sc_data_direction = DMA_FROM_DEVICE; cmd->transfersize = req->data_len; cmd->allowed = 3; From 1ee9530a71686436dbeb5f31dd5b925c39cf71d7 Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Mon, 12 Dec 2005 16:44:05 +0000 Subject: [PATCH 07/28] [ARM] 3201/1: PXA27x: Prevent hangup during resume due to inadvertedly enabling MBREQ (replaces: 3198/1) Patch from Lothar Wassmann The patch makes sure, that the ouptut functions of pins are restored before restoring the Alternat Function settings, preventing pins from being intermediately configured for undefined or unwanted alternate functions. Here is the original comment: I've got a PXA270 system that uses GPIO80 as nCS4. This system did hang on resume. Digging into the problem I found that the processor stalled immediately when restoring the GAFR2_U register which restored the alternate function for GPIO80. Since the GPDR registers were restored after the GAFR registers, the offending GPIO was configured as input at this point. Thus the alternate function that was in effect after restoring the GAFR was in fact the input function "MBREQ" instead of the output function "nCS4". The "PXA27x Processor Family Developer's Manual" (Footnote in Table 6-1 on page 6-3) states that: "The MBREQ alternate function must not be enabled until the PSSR[RDH] bit field is cleared. For more details, see Table 3-15, "PSSR Bit Definitions" on page 3-71." There is another note in the Developer's Manual (chapter 24.4.2 "GPIO operation as Alternate Function" on page 24-4) stating that: "Configuring a GPIO for an alternate function that is not defined for it causes unpredictable results." Since some GPIOs have no input function defined, and to prevent inadvertedly programming the MBREQ function on some pin, the GAFR registers should be restored after the GPDR registers have been restored. Additional provisions have to be made when the MBREQ function is actually required. The corresponding GAFR bits should not be restored with the regular GAFR restore, but must be set only after the PSSR bits have been cleared. Signed-off-by: Lothar Wassmann Signed-off-by: Russell King --- arch/arm/mach-pxa/pm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index f74b9af112dc..852ea72d8c80 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -155,19 +155,20 @@ int pxa_pm_enter(suspend_state_t state) PSPR = 0; /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GAFR0_L); RESTORE(GAFR0_U); RESTORE(GAFR1_L); RESTORE(GAFR1_U); RESTORE(GAFR2_L); RESTORE(GAFR2_U); - RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); - RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); #ifdef CONFIG_PXA27x RESTORE(MDREFR); - RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3); - RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); + RESTORE_GPLEVEL(3); RESTORE(GPDR3); + RESTORE(GAFR3_L); RESTORE(GAFR3_U); + RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); RESTORE(PFER); RESTORE(PKWR); #endif From 1a68de5c08be8c77c4ad208306187bd95107c7cd Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 12 Dec 2005 13:05:08 -0600 Subject: [PATCH 08/28] [SCSI] fix double free of scsi request queue Current scsi scanning code appears to have a use after free bug is a LLDD's slave_alloc fails. Remove the redundant scsi_free_queue. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 374853df9cca..be276ea8f033 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -279,7 +279,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, out_device_destroy: transport_destroy_device(&sdev->sdev_gendev); - scsi_free_queue(sdev->request_queue); put_device(&sdev->sdev_gendev); out: if (display_failure_msg) From 322e079f1b606e46b79bb8b8e6cf6110b5f2aa3f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:40 -0500 Subject: [PATCH 09/28] [SCSI] Negotiate correctly with async-only devices When we got a device only capable of async, we would zero out goal->period which would cause us to try PPR negotiations. Leave goal->period alone, and check goal->offset before doing PPR. Kudos to Daniel Forsgren for figuring this out. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_hipd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index a7420cad4547..1564ca203a3e 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1405,7 +1405,6 @@ static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget, goal->iu = 0; goal->dt = 0; goal->qas = 0; - goal->period = 0; goal->offset = 0; return; } @@ -1465,7 +1464,8 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp * Many devices implement PPR in a buggy way, so only use it if we * really want to. */ - if (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)) { + if (goal->offset && + (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) { nego = NS_PPR; } else if (spi_width(starget) != goal->width) { nego = NS_WIDE; From c9526497cf03ee775c3a6f8ba62335735f98de7a Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 9 Dec 2005 17:45:22 -0500 Subject: [PATCH 10/28] [SCSI] Consolidate REQ_BLOCK_PC handling path (fix ipod panic) This follows on from Jens' patch and consolidates all of the ULD separate handlers for REQ_BLOCK_PC into a single call which has his fix for our direction bug. Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 33 +++++++++++++++++++++------------ drivers/scsi/sd.c | 16 +--------------- drivers/scsi/sr.c | 20 +++----------------- drivers/scsi/st.c | 19 +------------------ include/scsi/scsi_cmnd.h | 1 + 5 files changed, 27 insertions(+), 62 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 097888721ec4..9be5769d44aa 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1078,6 +1078,26 @@ static void scsi_generic_done(struct scsi_cmnd *cmd) scsi_io_completion(cmd, cmd->result == 0 ? cmd->bufflen : 0, 0); } +void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries) +{ + struct request *req = cmd->request; + + BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd)); + memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); + cmd->cmd_len = req->cmd_len; + if (!req->data_len) + cmd->sc_data_direction = DMA_NONE; + else if (rq_data_dir(req) == WRITE) + cmd->sc_data_direction = DMA_TO_DEVICE; + else + cmd->sc_data_direction = DMA_FROM_DEVICE; + + cmd->transfersize = req->data_len; + cmd->allowed = retries; + cmd->timeout_per_command = req->timeout; +} +EXPORT_SYMBOL_GPL(scsi_setup_blk_pc_cmnd); + static int scsi_prep_fn(struct request_queue *q, struct request *req) { struct scsi_device *sdev = q->queuedata; @@ -1213,18 +1233,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) goto kill; } } else { - memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); - cmd->cmd_len = req->cmd_len; - if (!req->data_len) - cmd->sc_data_direction = DMA_NONE; - else if (rq_data_dir(req) == WRITE) - cmd->sc_data_direction = DMA_TO_DEVICE; - else - cmd->sc_data_direction = DMA_FROM_DEVICE; - - cmd->transfersize = req->data_len; - cmd->allowed = 3; - cmd->timeout_per_command = req->timeout; + scsi_setup_blk_pc_cmnd(cmd, 3); cmd->done = scsi_generic_done; } } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8613a1317712..03fcbab30033 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -245,24 +245,10 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) * SG_IO from block layer already setup, just copy cdb basically */ if (blk_pc_request(rq)) { - if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd)) - return 0; - - memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd)); - SCpnt->cmd_len = rq->cmd_len; - if (rq_data_dir(rq) == WRITE) - SCpnt->sc_data_direction = DMA_TO_DEVICE; - else if (rq->data_len) - SCpnt->sc_data_direction = DMA_FROM_DEVICE; - else - SCpnt->sc_data_direction = DMA_NONE; - - this_count = rq->data_len; + scsi_setup_blk_pc_cmnd(SCpnt, SD_PASSTHROUGH_RETRIES); if (rq->timeout) timeout = rq->timeout; - SCpnt->transfersize = rq->data_len; - SCpnt->allowed = SD_PASSTHROUGH_RETRIES; goto queue; } diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index d68cea753bb2..fb4012b5c188 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -320,25 +320,11 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) * these are already setup, just copy cdb basically */ if (SCpnt->request->flags & REQ_BLOCK_PC) { - struct request *rq = SCpnt->request; + scsi_setup_blk_pc_cmnd(SCpnt, MAX_RETRIES); - if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd)) - return 0; + if (SCpnt->timeout_per_command) + timeout = SCpnt->timeout_per_command; - memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd)); - SCpnt->cmd_len = rq->cmd_len; - if (!rq->data_len) - SCpnt->sc_data_direction = DMA_NONE; - else if (rq_data_dir(rq) == WRITE) - SCpnt->sc_data_direction = DMA_TO_DEVICE; - else - SCpnt->sc_data_direction = DMA_FROM_DEVICE; - - this_count = rq->data_len; - if (rq->timeout) - timeout = rq->timeout; - - SCpnt->transfersize = rq->data_len; goto queue; } diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 7ac6ea141fff..dd592f6a2529 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4194,27 +4194,10 @@ static void st_intr(struct scsi_cmnd *SCpnt) */ static int st_init_command(struct scsi_cmnd *SCpnt) { - struct request *rq; - if (!(SCpnt->request->flags & REQ_BLOCK_PC)) return 0; - rq = SCpnt->request; - if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd)) - return 0; - - memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd)); - SCpnt->cmd_len = rq->cmd_len; - - if (rq_data_dir(rq) == WRITE) - SCpnt->sc_data_direction = DMA_TO_DEVICE; - else if (rq->data_len) - SCpnt->sc_data_direction = DMA_FROM_DEVICE; - else - SCpnt->sc_data_direction = DMA_NONE; - - SCpnt->timeout_per_command = rq->timeout; - SCpnt->transfersize = rq->data_len; + scsi_setup_blk_pc_cmnd(SCpnt, 0); SCpnt->done = st_intr; return 1; } diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 7529f4388bb4..20da282d4abb 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -151,5 +151,6 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); +extern void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries); #endif /* _SCSI_SCSI_CMND_H */ From 45f8245b972e360c19aec9032e2a2033b8ac3719 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 14 Dec 2005 14:57:35 +0000 Subject: [PATCH 11/28] [MMC] Explain the internals of mmc_power_up() It seems that people get confused about what is happening in mmc_power_up(). Add a comment to make it clear why we have a two stage process. Signed-off-by: Russell King --- drivers/mmc/mmc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index b586a83a9b4c..eb41391e06e9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -679,7 +679,15 @@ static void mmc_idle_cards(struct mmc_host *host) } /* - * Apply power to the MMC stack. + * Apply power to the MMC stack. This is a two-stage process. + * First, we enable power to the card without the clock running. + * We then wait a bit for the power to stabilise. Finally, + * enable the bus drivers and clock to the card. + * + * We must _NOT_ enable the clock prior to power stablising. + * + * If a host does all the power sequencing itself, ignore the + * initial MMC_POWER_UP stage. */ static void mmc_power_up(struct mmc_host *host) { From 27af4cfd11883073359bd5acab1962b0fa96a3bf Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Wed, 14 Dec 2005 06:58:05 -0600 Subject: [PATCH 12/28] [IA64] fix for SET_PERSONALITY when CONFIG_IA32_SUPPORT is not set. Missed this when fixing the SET_PERSONALITY change. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index a4da715a360c..e9904c74d2ba 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -721,11 +721,13 @@ flush_thread (void) /* drop floating-point and debug-register state if it exists: */ current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID); ia64_drop_fpu(current); +#ifdef CONFIG_IA32_SUPPORT if (IS_IA32_PROCESS(ia64_task_regs(current))) { ia32_drop_partial_page_list(current); current->thread.task_size = IA32_PAGE_OFFSET; set_fs(USER_DS); } +#endif } /* From 1542272a60ab9c0655a13ead8b7d7a661365f9fb Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 14 Dec 2005 12:55:24 -0800 Subject: [PATCH 13/28] [GRE]: Fix hardware checksum modification The skb_postpull_rcsum introduced a bug to the checksum modification. Although the length pulled is offset bytes, the origin of the pulling is the GRE header, not the IP header. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index a4c347c3b8e3..46f9d9cf7a5f 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -618,7 +618,7 @@ static int ipgre_rcv(struct sk_buff *skb) skb->mac.raw = skb->nh.raw; skb->nh.raw = __pskb_pull(skb, offset); - skb_postpull_rcsum(skb, skb->mac.raw, offset); + skb_postpull_rcsum(skb, skb->h.raw, offset); memset(&(IPCB(skb)->opt), 0, sizeof(struct ip_options)); skb->pkt_type = PACKET_HOST; #ifdef CONFIG_NET_IPGRE_BROADCAST From c2e2611425a956d25d2948c5d95d3848c4db1257 Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Wed, 14 Dec 2005 22:04:22 +0000 Subject: [PATCH 14/28] [ARM] 3205/1: Handle new EABI relocations when loading kernel modules. Patch from Daniel Jacobowitz Handle new EABI relocations when loading kernel modules. This is necessary for CONFIG_AEABI kernels, and also for some broken (since fixed) old ABI toolchains. Signed-off-by: Daniel Jacobowitz Signed-off-by: Russell King --- arch/arm/kernel/module.c | 2 ++ include/asm-arm/elf.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 6055e1427ba3..055bf5d28894 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -101,6 +101,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, break; case R_ARM_PC24: + case R_ARM_CALL: + case R_ARM_JUMP24: offset = (*(u32 *)loc & 0x00ffffff) << 2; if (offset & 0x02000000) offset -= 0x04000000; diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index 7da97a937548..2d44b42d1847 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -22,6 +22,8 @@ typedef unsigned long elf_freg_t[3]; #define R_ARM_NONE 0 #define R_ARM_PC24 1 #define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) typedef elf_greg_t elf_gregset_t[ELF_NGREG]; From a388442c3798a345d131ff8b9d6dea0bfda3fefc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 16:23:16 -0800 Subject: [PATCH 15/28] [VLAN]: Fix hardware rx csum errors Receiving VLAN packets over a device (without VLAN assist) that is doing hardware checksumming (CHECKSUM_HW), causes errors because the VLAN code forgets to adjust the hardware checksum. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index b74864889670..f2a8750bbf1d 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -165,6 +165,9 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev, skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */ + /* Need to correct hardware checksum */ + skb_postpull_rcsum(skb, vhdr, VLAN_HLEN); + /* Ok, lets check to make sure the device (dev) we * came in on is what this VLAN is attached to. */ From deb5e5c0c68e59b1bf9ede66da9e6a89f6557595 Mon Sep 17 00:00:00 2001 From: Jeremy Higdon Date: Thu, 15 Dec 2005 02:10:35 +0100 Subject: [PATCH 16/28] [PATCH] sgiioc4: check for no hwifs available Add a check to the sgiioc4 driver for the case where all available ide_hwifs structures are in use. Signed-off-by: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index af526b671c4e..4ee597d08797 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -622,12 +622,18 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d) ide_hwif_t *hwif; int h; + /* + * Find an empty HWIF; if none available, return -ENOMEM. + */ for (h = 0; h < MAX_HWIFS; ++h) { hwif = &ide_hwifs[h]; - /* Find an empty HWIF */ if (hwif->chipset == ide_unknown) break; } + if (h == MAX_HWIFS) { + printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name); + return -ENOMEM; + } /* Get the CmdBlk and CtrlBlk Base Registers */ base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET; From ceef833bae05e393859f1946a9802fb61f0febdf Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 15 Dec 2005 02:11:55 +0100 Subject: [PATCH 17/28] [PATCH] via82cxxx IDE: Add VT8251 ISA bridge Some motherboards (such as the Asus P5V800-MX) ship a PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge. This southbridge is currently unrecognised in the via82cxxx IDE driver, preventing those users from getting DMA access to disks. Signed-off-by: Daniel Drake Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/via82cxxx.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 7161ce0ef5aa..86fb1e0286d3 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -80,6 +80,7 @@ static struct via_isa_bridge { u16 flags; } via_isa_bridges[] = { { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1e737e269db9..4db67b3b05cc 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1244,6 +1244,7 @@ #define PCI_DEVICE_ID_VIA_8378_0 0x3205 #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 +#define PCI_DEVICE_ID_VIA_8251 0x3287 #define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 From 38f9d412be1ed29ee3b41782f22fd85b1c95fbed Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 15 Dec 2005 02:12:53 +0100 Subject: [PATCH 18/28] [PATCH] ide: MPC8xx IDE depends on IDE=y && BLK_DEV_IDE=y The following patch adds a dependancy on IDE=y && BLK_DEV_IDE=y for the MPC8xx IDE driver. The code is not modular at the moment (init called from platform setup code). Signed-off-by: Marcelo Tosatti Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 31e649a9ff71..45579ae12c01 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -940,7 +940,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_MPC8xx_IDE bool "MPC8xx IDE support" - depends on 8xx + depends on 8xx && IDE=y && BLK_DEV_IDE=y help This option provides support for IDE on Motorola MPC8xx Systems. Please see 'Type of MPC8xx IDE interface' for details. From 65e5f2e3b457b6b20a5c4481312189d141a33d24 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 15 Dec 2005 02:16:18 +0100 Subject: [PATCH 19/28] [PATCH] ide: core modifications for AU1200 bart: slightly modified by me Signed-off-by: Jordan Crouse Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 15 ++++++--------- include/asm-mips/mach-au1x00/au1xxx_ide.h | 5 ----- include/linux/ide.h | 6 ++++++ 3 files changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 1e1531334c25..0523da77425a 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -90,11 +90,6 @@ #include #include -struct drive_list_entry { - const char *id_model; - const char *id_firmware; -}; - static const struct drive_list_entry drive_whitelist [] = { { "Micropolis 2112A" , "ALL" }, @@ -139,7 +134,7 @@ static const struct drive_list_entry drive_blacklist [] = { }; /** - * in_drive_list - look for drive in black/white list + * ide_in_drive_list - look for drive in black/white list * @id: drive identifier * @drive_table: list to inspect * @@ -147,7 +142,7 @@ static const struct drive_list_entry drive_blacklist [] = { * Returns 1 if the drive is found in the table. */ -static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) +int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) { for ( ; drive_table->id_model ; drive_table++) if ((!strcmp(drive_table->id_model, id->model)) && @@ -157,6 +152,8 @@ static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *d return 0; } +EXPORT_SYMBOL_GPL(ide_in_drive_list); + /** * ide_dma_intr - IDE DMA interrupt handler * @drive: the drive the interrupt is for @@ -663,7 +660,7 @@ int __ide_dma_bad_drive (ide_drive_t *drive) { struct hd_driveid *id = drive->id; - int blacklist = in_drive_list(id, drive_blacklist); + int blacklist = ide_in_drive_list(id, drive_blacklist); if (blacklist) { printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n", drive->name, id->model); @@ -677,7 +674,7 @@ EXPORT_SYMBOL(__ide_dma_bad_drive); int __ide_dma_good_drive (ide_drive_t *drive) { struct hd_driveid *id = drive->id; - return in_drive_list(id, drive_whitelist); + return ide_in_drive_list(id, drive_whitelist); } EXPORT_SYMBOL(__ide_dma_good_drive); diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 33d275c3b84c..0c3c127e619e 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -87,11 +87,6 @@ typedef struct } _auide_hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -struct drive_list_entry { - const char * id_model; - const char * id_firmware; -}; - /* HD white list */ static const struct drive_list_entry dma_white_list [] = { /* diff --git a/include/linux/ide.h b/include/linux/ide.h index a39c3c59789d..a6b28dcf8f0d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1371,6 +1371,12 @@ void ide_init_sg_cmd(ide_drive_t *, struct request *); #define GOOD_DMA_DRIVE 1 #ifdef CONFIG_BLK_DEV_IDEDMA +struct drive_list_entry { + const char *id_model; + const char *id_firmware; +}; + +int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); int __ide_dma_bad_drive(ide_drive_t *); int __ide_dma_good_drive(ide_drive_t *); int ide_use_dma(ide_drive_t *); From 8f29e650bffc1e22ed6b2d0b321bc77627f3bb7a Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 15 Dec 2005 02:17:46 +0100 Subject: [PATCH 20/28] [PATCH] ide: AU1200 IDE update Changes here include removing all of CONFIG_PM while it is being repeatedly smacked with a lead pipe, moving the BURSTMODE param to a #define (it should be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t, and general cleanups and whatnot. Signed-off-by: Jordan Crouse Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 8 - drivers/ide/mips/Makefile | 3 + drivers/ide/mips/au1xxx-ide.c | 1436 +++++++-------------- include/asm-mips/mach-au1x00/au1xxx_ide.h | 17 +- 4 files changed, 512 insertions(+), 952 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 45579ae12c01..1c81174595b3 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -807,14 +807,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX endchoice -config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - bool "Enable burstable Mode on DbDMA" - default false - depends BLK_DEV_IDE_AU1XXX - help - This option enable the burstable Flag on DbDMA controller - (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY"). - config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ int "Maximum transfer size (KB) per request (up to 128)" default "128" diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile index 578e52a59588..677c7b2bac92 100644 --- a/drivers/ide/mips/Makefile +++ b/drivers/ide/mips/Makefile @@ -1 +1,4 @@ obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o +obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o + +EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 2b6327c576b9..32431dcf5d8e 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -31,865 +31,638 @@ */ #undef REALLY_SLOW_IO /* most systems can safely undef this */ -#include /* for CONFIG_BLK_DEV_IDEPCI */ #include #include #include #include -#include -#include -#include -#include +#include + #include #include #include #include +#include "ide-timing.h" + #include #include #include -#if CONFIG_PM -#include -#endif - #include #define DRV_NAME "au1200-ide" #define DRV_VERSION "1.0" -#define DRV_AUTHOR "AMD PCS / Pete Popov " -#define DRV_DESC "Au1200 IDE" +#define DRV_AUTHOR "Enrico Walther / Pete Popov " + +/* enable the burstmode in the dbdma */ +#define IDE_AU1XXX_BURSTMODE 1 static _auide_hwif auide_hwif; -static spinlock_t ide_tune_drive_spin_lock = SPIN_LOCK_UNLOCKED; -static spinlock_t ide_tune_chipset_spin_lock = SPIN_LOCK_UNLOCKED; -static int dbdma_init_done = 0; +static int dbdma_init_done; -/* - * local I/O functions - */ -u8 auide_inb(unsigned long port) -{ - return (au_readb(port)); -} - -u16 auide_inw(unsigned long port) -{ - return (au_readw(port)); -} - -u32 auide_inl(unsigned long port) -{ - return (au_readl(port)); -} +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) void auide_insw(unsigned long port, void *addr, u32 count) { -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) + _auide_hwif *ahwif = &auide_hwif; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; - _auide_hwif *ahwif = &auide_hwif; - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - - if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, - DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); - return; - } - ctp = *((chan_tab_t **)ahwif->rx_chan); - dp = ctp->cur_ptr; - while (dp->dscr_cmd0 & DSCR_CMD0_V) - ; - ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); -#else - while (count--) - { - *(u16 *)addr = au_readw(port); - addr +=2 ; - } -#endif -} - -void auide_insl(unsigned long port, void *addr, u32 count) -{ - while (count--) - { - *(u32 *)addr = au_readl(port); - /* NOTE: For IDE interfaces over PCMCIA, - * 32-bit access does not work - */ - addr += 4; - } -} - -void auide_outb(u8 addr, unsigned long port) -{ - return (au_writeb(addr, port)); -} - -void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port) -{ - return (au_writeb(addr, port)); -} - -void auide_outw(u16 addr, unsigned long port) -{ - return (au_writew(addr, port)); -} - -void auide_outl(u32 addr, unsigned long port) -{ - return (au_writel(addr, port)); + if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, + DDMA_FLAGS_NOIE)) { + printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + return; + } + ctp = *((chan_tab_t **)ahwif->rx_chan); + dp = ctp->cur_ptr; + while (dp->dscr_cmd0 & DSCR_CMD0_V) + ; + ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); } void auide_outsw(unsigned long port, void *addr, u32 count) { -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) - _auide_hwif *ahwif = &auide_hwif; - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; + _auide_hwif *ahwif = &auide_hwif; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + if(!put_source_flags(ahwif->tx_chan, (void*)addr, + count << 1, DDMA_FLAGS_NOIE)) { + printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + return; + } + ctp = *((chan_tab_t **)ahwif->tx_chan); + dp = ctp->cur_ptr; + while (dp->dscr_cmd0 & DSCR_CMD0_V) + ; + ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); +} - if(!put_source_flags(ahwif->tx_chan, (void*)addr, - count << 1, DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); - return; - } - ctp = *((chan_tab_t **)ahwif->tx_chan); - dp = ctp->cur_ptr; - while (dp->dscr_cmd0 & DSCR_CMD0_V) - ; - ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); -#else - while (count--) - { - au_writew(*(u16 *)addr, port); - addr += 2; - } #endif -} - -void auide_outsl(unsigned long port, void *addr, u32 count) -{ - while (count--) - { - au_writel(*(u32 *)addr, port); - /* NOTE: For IDE interfaces over PCMCIA, - * 32-bit access does not work - */ - addr += 4; - } -} static void auide_tune_drive(ide_drive_t *drive, byte pio) { - int mem_sttime; - int mem_stcfg; - unsigned long flags; - u8 speed; + int mem_sttime; + int mem_stcfg; + u8 speed; - /* get the best pio mode for the drive */ - pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + /* get the best pio mode for the drive */ + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); - printk("%s: setting Au1XXX IDE to PIO mode%d\n", - drive->name, pio); + printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n", + drive->name, pio); - spin_lock_irqsave(&ide_tune_drive_spin_lock, flags); + mem_sttime = 0; + mem_stcfg = au_readl(MEM_STCFG2); - mem_sttime = 0; - mem_stcfg = au_readl(MEM_STCFG2); + /* set pio mode! */ + switch(pio) { + case 0: + mem_sttime = SBC_IDE_TIMING(PIO0); - /* set pio mode! */ - switch(pio) { - case 0: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO0_TWCS - | SBC_IDE_PIO0_TCSH - | SBC_IDE_PIO0_TCSOFF - | SBC_IDE_PIO0_TWP - | SBC_IDE_PIO0_TCSW - | SBC_IDE_PIO0_TPM - | SBC_IDE_PIO0_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; + break; - au_writel(mem_sttime,MEM_STTIME2); - au_writel(mem_stcfg,MEM_STCFG2); - break; + case 1: + mem_sttime = SBC_IDE_TIMING(PIO1); - case 1: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO1_TWCS - | SBC_IDE_PIO1_TCSH - | SBC_IDE_PIO1_TCSOFF - | SBC_IDE_PIO1_TWP - | SBC_IDE_PIO1_TCSW - | SBC_IDE_PIO1_TPM - | SBC_IDE_PIO1_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; - break; + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; + break; - case 2: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO2_TWCS - | SBC_IDE_PIO2_TCSH - | SBC_IDE_PIO2_TCSOFF - | SBC_IDE_PIO2_TWP - | SBC_IDE_PIO2_TCSW - | SBC_IDE_PIO2_TPM - | SBC_IDE_PIO2_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; - break; + case 2: + mem_sttime = SBC_IDE_TIMING(PIO2); - case 3: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO3_TWCS - | SBC_IDE_PIO3_TCSH - | SBC_IDE_PIO3_TCSOFF - | SBC_IDE_PIO3_TWP - | SBC_IDE_PIO3_TCSW - | SBC_IDE_PIO3_TPM - | SBC_IDE_PIO3_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; + break; - break; + case 3: + mem_sttime = SBC_IDE_TIMING(PIO3); - case 4: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_PIO4_TWCS - | SBC_IDE_PIO4_TCSH - | SBC_IDE_PIO4_TCSOFF - | SBC_IDE_PIO4_TWP - | SBC_IDE_PIO4_TCSW - | SBC_IDE_PIO4_TPM - | SBC_IDE_PIO4_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; - break; - } + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; - au_writel(mem_sttime,MEM_STTIME2); - au_writel(mem_stcfg,MEM_STCFG2); + break; - spin_unlock_irqrestore(&ide_tune_drive_spin_lock, flags); + case 4: + mem_sttime = SBC_IDE_TIMING(PIO4); - speed = pio + XFER_PIO_0; - ide_config_drive_speed(drive, speed); + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; + break; + } + + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); + + speed = pio + XFER_PIO_0; + ide_config_drive_speed(drive, speed); } static int auide_tune_chipset (ide_drive_t *drive, u8 speed) { - u8 mode = 0; - int mem_sttime; - int mem_stcfg; - unsigned long flags; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - struct hd_driveid *id = drive->id; + int mem_sttime; + int mem_stcfg; + unsigned long mode; - /* - * Now see what the current drive is capable of, - * selecting UDMA only if the mate said it was ok. - */ - if (id && (id->capability & 1) && drive->autodma && - !__ide_dma_bad_drive(drive)) { - if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { - if (id->dma_mword & 4) - mode = XFER_MW_DMA_2; - else if (id->dma_mword & 2) - mode = XFER_MW_DMA_1; - else if (id->dma_mword & 1) - mode = XFER_MW_DMA_0; - } - } +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + if (ide_use_dma(drive)) + mode = ide_dma_speed(drive, 0); #endif - spin_lock_irqsave(&ide_tune_chipset_spin_lock, flags); + mem_sttime = 0; + mem_stcfg = au_readl(MEM_STCFG2); - mem_sttime = 0; - mem_stcfg = au_readl(MEM_STCFG2); - - switch(speed) { - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - auide_tune_drive(drive, (speed - XFER_PIO_0)); - break; + if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) { + auide_tune_drive(drive, speed - XFER_PIO_0); + return 0; + } + + switch(speed) { #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - case XFER_MW_DMA_2: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_MDMA2_TWCS - | SBC_IDE_MDMA2_TCSH - | SBC_IDE_MDMA2_TCSOFF - | SBC_IDE_MDMA2_TWP - | SBC_IDE_MDMA2_TCSW - | SBC_IDE_MDMA2_TPM - | SBC_IDE_MDMA2_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; + case XFER_MW_DMA_2: + mem_sttime = SBC_IDE_TIMING(MDMA2); - mode = XFER_MW_DMA_2; - break; - case XFER_MW_DMA_1: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_MDMA1_TWCS - | SBC_IDE_MDMA1_TCSH - | SBC_IDE_MDMA1_TCSOFF - | SBC_IDE_MDMA1_TWP - | SBC_IDE_MDMA1_TCSW - | SBC_IDE_MDMA1_TPM - | SBC_IDE_MDMA1_TA; - /* set configuration for RCS2# */ - mem_stcfg &= ~TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; - mode = XFER_MW_DMA_1; - break; - case XFER_MW_DMA_0: - /* set timing parameters for RCS2# */ - mem_sttime = SBC_IDE_MDMA0_TWCS - | SBC_IDE_MDMA0_TCSH - | SBC_IDE_MDMA0_TCSOFF - | SBC_IDE_MDMA0_TWP - | SBC_IDE_MDMA0_TCSW - | SBC_IDE_MDMA0_TPM - | SBC_IDE_MDMA0_TA; - /* set configuration for RCS2# */ - mem_stcfg |= TS_MASK; - mem_stcfg &= ~TCSOE_MASK; - mem_stcfg &= ~TOECS_MASK; - mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; + mode = XFER_MW_DMA_2; + break; + case XFER_MW_DMA_1: + mem_sttime = SBC_IDE_TIMING(MDMA1); - mode = XFER_MW_DMA_0; - break; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; + + mode = XFER_MW_DMA_1; + break; + case XFER_MW_DMA_0: + mem_sttime = SBC_IDE_TIMING(MDMA0); + + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; + + mode = XFER_MW_DMA_0; + break; #endif - default: - return 1; - } + default: + return 1; + } + + if (ide_config_drive_speed(drive, mode)) + return 1; - /* - * Tell the drive to switch to the new mode; abort on failure. - */ - if (!mode || ide_config_drive_speed(drive, mode)) - { - return 1; /* failure */ - } + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); - - au_writel(mem_sttime,MEM_STTIME2); - au_writel(mem_stcfg,MEM_STCFG2); - - spin_unlock_irqrestore(&ide_tune_chipset_spin_lock, flags); - - return 0; + return 0; } /* * Multi-Word DMA + DbDMA functions */ -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -static int in_drive_list(struct hd_driveid *id, - const struct drive_list_entry *drive_table) -{ - for ( ; drive_table->id_model ; drive_table++){ - if ((!strcmp(drive_table->id_model, id->model)) && - ((strstr(drive_table->id_firmware, id->fw_rev)) || - (!strcmp(drive_table->id_firmware, "ALL"))) - ) - return 1; - } - return 0; -} +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA static int auide_build_sglist(ide_drive_t *drive, struct request *rq) { - ide_hwif_t *hwif = drive->hwif; - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; - struct scatterlist *sg = hwif->sg_table; + ide_hwif_t *hwif = drive->hwif; + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + struct scatterlist *sg = hwif->sg_table; - ide_map_sg(drive, rq); + ide_map_sg(drive, rq); - if (rq_data_dir(rq) == READ) - hwif->sg_dma_direction = DMA_FROM_DEVICE; - else - hwif->sg_dma_direction = DMA_TO_DEVICE; + if (rq_data_dir(rq) == READ) + hwif->sg_dma_direction = DMA_FROM_DEVICE; + else + hwif->sg_dma_direction = DMA_TO_DEVICE; - return dma_map_sg(ahwif->dev, sg, hwif->sg_nents, - hwif->sg_dma_direction); + return dma_map_sg(ahwif->dev, sg, hwif->sg_nents, + hwif->sg_dma_direction); } static int auide_build_dmatable(ide_drive_t *drive) { - int i, iswrite, count = 0; - ide_hwif_t *hwif = HWIF(drive); + int i, iswrite, count = 0; + ide_hwif_t *hwif = HWIF(drive); - struct request *rq = HWGROUP(drive)->rq; + struct request *rq = HWGROUP(drive)->rq; - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; - struct scatterlist *sg; + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + struct scatterlist *sg; - iswrite = (rq_data_dir(rq) == WRITE); - /* Save for interrupt context */ - ahwif->drive = drive; + iswrite = (rq_data_dir(rq) == WRITE); + /* Save for interrupt context */ + ahwif->drive = drive; - /* Build sglist */ - hwif->sg_nents = i = auide_build_sglist(drive, rq); + /* Build sglist */ + hwif->sg_nents = i = auide_build_sglist(drive, rq); - if (!i) - return 0; + if (!i) + return 0; - /* fill the descriptors */ - sg = hwif->sg_table; - while (i && sg_dma_len(sg)) { - u32 cur_addr; - u32 cur_len; + /* fill the descriptors */ + sg = hwif->sg_table; + while (i && sg_dma_len(sg)) { + u32 cur_addr; + u32 cur_len; - cur_addr = sg_dma_address(sg); - cur_len = sg_dma_len(sg); + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); - while (cur_len) { - u32 flags = DDMA_FLAGS_NOIE; - unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; + while (cur_len) { + u32 flags = DDMA_FLAGS_NOIE; + unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; - if (++count >= PRD_ENTRIES) { - printk(KERN_WARNING "%s: DMA table too small\n", - drive->name); - goto use_pio_instead; - } + if (++count >= PRD_ENTRIES) { + printk(KERN_WARNING "%s: DMA table too small\n", + drive->name); + goto use_pio_instead; + } - /* Lets enable intr for the last descriptor only */ - if (1==i) - flags = DDMA_FLAGS_IE; - else - flags = DDMA_FLAGS_NOIE; + /* Lets enable intr for the last descriptor only */ + if (1==i) + flags = DDMA_FLAGS_IE; + else + flags = DDMA_FLAGS_NOIE; - if (iswrite) { - if(!put_source_flags(ahwif->tx_chan, - (void*)(page_address(sg->page) - + sg->offset), - tc, flags)) { - printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + if (iswrite) { + if(!put_source_flags(ahwif->tx_chan, + (void*)(page_address(sg->page) + + sg->offset), + tc, flags)) { + printk(KERN_ERR "%s failed %d\n", + __FUNCTION__, __LINE__); } - } else + } else { - if(!put_dest_flags(ahwif->rx_chan, - (void*)(page_address(sg->page) - + sg->offset), - tc, flags)) { - printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + if(!put_dest_flags(ahwif->rx_chan, + (void*)(page_address(sg->page) + + sg->offset), + tc, flags)) { + printk(KERN_ERR "%s failed %d\n", + __FUNCTION__, __LINE__); } - } + } - cur_addr += tc; - cur_len -= tc; - } - sg++; - i--; - } + cur_addr += tc; + cur_len -= tc; + } + sg++; + i--; + } - if (count) - return 1; + if (count) + return 1; -use_pio_instead: - dma_unmap_sg(ahwif->dev, - hwif->sg_table, - hwif->sg_nents, - hwif->sg_dma_direction); + use_pio_instead: + dma_unmap_sg(ahwif->dev, + hwif->sg_table, + hwif->sg_nents, + hwif->sg_dma_direction); - return 0; /* revert to PIO for this request */ + return 0; /* revert to PIO for this request */ } static int auide_dma_end(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + ide_hwif_t *hwif = HWIF(drive); + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; - if (hwif->sg_nents) { - dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents, - hwif->sg_dma_direction); - hwif->sg_nents = 0; - } + if (hwif->sg_nents) { + dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents, + hwif->sg_dma_direction); + hwif->sg_nents = 0; + } - return 0; + return 0; } static void auide_dma_start(ide_drive_t *drive ) { -// printk("%s\n", __FUNCTION__); } -ide_startstop_t auide_dma_intr(ide_drive_t *drive) -{ - //printk("%s\n", __FUNCTION__); - - u8 stat = 0, dma_stat = 0; - - dma_stat = HWIF(drive)->ide_dma_end(drive); - stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */ - if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { - if (!dma_stat) { - struct request *rq = HWGROUP(drive)->rq; - - ide_end_request(drive, 1, rq->nr_sectors); - return ide_stopped; - } - printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", - drive->name, dma_stat); - } - return ide_error(drive, "dma_intr", stat); -} static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command) { - //printk("%s\n", __FUNCTION__); - - /* issue cmd to drive */ - ide_execute_command(drive, command, &auide_dma_intr, - (2*WAIT_CMD), NULL); + /* issue cmd to drive */ + ide_execute_command(drive, command, &ide_dma_intr, + (2*WAIT_CMD), NULL); } static int auide_dma_setup(ide_drive_t *drive) -{ -// printk("%s\n", __FUNCTION__); +{ + struct request *rq = HWGROUP(drive)->rq; - if (drive->media != ide_disk) - return 1; + if (!auide_build_dmatable(drive)) { + ide_map_sg(drive, rq); + return 1; + } - if (!auide_build_dmatable(drive)) - /* try PIO instead of DMA */ - return 1; - - drive->waiting_for_dma = 1; - - return 0; + drive->waiting_for_dma = 1; + return 0; } static int auide_dma_check(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); + u8 speed; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - if( !dbdma_init_done ){ - auide_hwif.white_list = in_drive_list(drive->id, - dma_white_list); - auide_hwif.black_list = in_drive_list(drive->id, - dma_black_list); - auide_hwif.drive = drive; - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; - } + + if( dbdma_init_done == 0 ){ + auide_hwif.white_list = ide_in_drive_list(drive->id, + dma_white_list); + auide_hwif.black_list = ide_in_drive_list(drive->id, + dma_black_list); + auide_hwif.drive = drive; + auide_ddma_init(&auide_hwif); + dbdma_init_done = 1; + } #endif - /* Is the drive in our DMA black list? */ - if ( auide_hwif.black_list ) { - drive->using_dma = 0; - printk("%s found in dma_blacklist[]! Disabling DMA.\n", - drive->id->model); - } - else - drive->using_dma = 1; + /* Is the drive in our DMA black list? */ - return HWIF(drive)->ide_dma_host_on(drive); + if ( auide_hwif.black_list ) { + drive->using_dma = 0; + + /* Borrowed the warning message from ide-dma.c */ + + printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n", + drive->name, drive->id->model); + } + else + drive->using_dma = 1; + + speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA); + + if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) + return HWIF(drive)->ide_dma_on(drive); + + return HWIF(drive)->ide_dma_off_quietly(drive); } static int auide_dma_test_irq(ide_drive_t *drive) -{ -// printk("%s\n", __FUNCTION__); - - if (!drive->waiting_for_dma) - printk(KERN_WARNING "%s: ide_dma_test_irq \ +{ + if (drive->waiting_for_dma == 0) + printk(KERN_WARNING "%s: ide_dma_test_irq \ called while not waiting\n", drive->name); - /* If dbdma didn't execute the STOP command yet, the - * active bit is still set + /* If dbdma didn't execute the STOP command yet, the + * active bit is still set */ - drive->waiting_for_dma++; - if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { - printk(KERN_WARNING "%s: timeout waiting for ddma to \ + drive->waiting_for_dma++; + if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { + printk(KERN_WARNING "%s: timeout waiting for ddma to \ complete\n", drive->name); - return 1; - } - udelay(10); - return 0; + return 1; + } + udelay(10); + return 0; } static int auide_dma_host_on(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - return 0; + return 0; } static int auide_dma_on(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - drive->using_dma = 1; - return auide_dma_host_on(drive); + drive->using_dma = 1; + return auide_dma_host_on(drive); } static int auide_dma_host_off(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - return 0; + return 0; } static int auide_dma_off_quietly(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - drive->using_dma = 0; - return auide_dma_host_off(drive); + drive->using_dma = 0; + return auide_dma_host_off(drive); } static int auide_dma_lostirq(ide_drive_t *drive) { -// printk("%s\n", __FUNCTION__); - - printk(KERN_ERR "%s: IRQ lost\n", drive->name); - return 0; + printk(KERN_ERR "%s: IRQ lost\n", drive->name); + return 0; } static void auide_ddma_tx_callback(int irq, void *param, struct pt_regs *regs) { -// printk("%s\n", __FUNCTION__); - - _auide_hwif *ahwif = (_auide_hwif*)param; - ahwif->drive->waiting_for_dma = 0; - return; + _auide_hwif *ahwif = (_auide_hwif*)param; + ahwif->drive->waiting_for_dma = 0; } static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs) { -// printk("%s\n", __FUNCTION__); - - _auide_hwif *ahwif = (_auide_hwif*)param; - ahwif->drive->waiting_for_dma = 0; - return; + _auide_hwif *ahwif = (_auide_hwif*)param; + ahwif->drive->waiting_for_dma = 0; } +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ + +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) +{ + dev->dev_id = dev_id; + dev->dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + dev->dev_intlevel = 0; + dev->dev_intpolarity = 0; + dev->dev_tsize = tsize; + dev->dev_devwidth = devwidth; + dev->dev_flags = flags; +} + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) + static int auide_dma_timeout(ide_drive_t *drive) { // printk("%s\n", __FUNCTION__); - printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); + printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - if (HWIF(drive)->ide_dma_test_irq(drive)) - return 0; + if (HWIF(drive)->ide_dma_test_irq(drive)) + return 0; - return HWIF(drive)->ide_dma_end(drive); + return HWIF(drive)->ide_dma_end(drive); } -#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ + +static int auide_ddma_init(_auide_hwif *auide) { + + dbdev_tab_t source_dev_tab, target_dev_tab; + u32 dev_id, tsize, devwidth, flags; + ide_hwif_t *hwif = auide->hwif; + dev_id = AU1XXX_ATA_DDMA_REQ; + + if (auide->white_list || auide->black_list) { + tsize = 8; + devwidth = 32; + } + else { + tsize = 1; + devwidth = 16; + + printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model); + printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'"); + } + +#ifdef IDE_AU1XXX_BURSTMODE + flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; +#else + flags = DEV_FLAGS_SYNC; +#endif + + /* setup dev_tab for tx channel */ + auide_init_dbdma_dev( &source_dev_tab, + dev_id, + tsize, devwidth, DEV_FLAGS_OUT | flags); + auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + auide_init_dbdma_dev( &source_dev_tab, + dev_id, + tsize, devwidth, DEV_FLAGS_IN | flags); + auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + /* We also need to add a target device for the DMA */ + auide_init_dbdma_dev( &target_dev_tab, + (u32)DSCR_CMD0_ALWAYS, + tsize, devwidth, DEV_FLAGS_ANYUSE); + auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); + + /* Get a channel for TX */ + auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, + auide->tx_dev_id, + auide_ddma_tx_callback, + (void*)auide); + + /* Get a channel for RX */ + auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, + auide->target_dev_id, + auide_ddma_rx_callback, + (void*)auide); + + auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, + NUM_DESCRIPTORS); + auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, + NUM_DESCRIPTORS); + + hwif->dmatable_cpu = dma_alloc_coherent(auide->dev, + PRD_ENTRIES * PRD_BYTES, /* 1 Page */ + &hwif->dmatable_dma, GFP_KERNEL); + + au1xxx_dbdma_start( auide->tx_chan ); + au1xxx_dbdma_start( auide->rx_chan ); + + return 0; +} +#else + static int auide_ddma_init( _auide_hwif *auide ) { -// printk("%s\n", __FUNCTION__); + dbdev_tab_t source_dev_tab; + int flags; - dbdev_tab_t source_dev_tab; -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - dbdev_tab_t target_dev_tab; - ide_hwif_t *hwif = auide->hwif; - char warning_output [2][80]; - int i; -#endif - - /* Add our custom device to DDMA device table */ - /* Create our new device entries in the table */ -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - source_dev_tab.dev_id = AU1XXX_ATA_DDMA_REQ; - - if( auide->white_list || auide->black_list ){ - source_dev_tab.dev_tsize = 8; - source_dev_tab.dev_devwidth = 32; - source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - source_dev_tab.dev_intlevel = 0; - source_dev_tab.dev_intpolarity = 0; - - /* init device table for target - static bus controller - */ - target_dev_tab.dev_id = DSCR_CMD0_ALWAYS; - target_dev_tab.dev_tsize = 8; - target_dev_tab.dev_devwidth = 32; - target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - target_dev_tab.dev_intlevel = 0; - target_dev_tab.dev_intpolarity = 0; - target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE; - } - else{ - source_dev_tab.dev_tsize = 1; - source_dev_tab.dev_devwidth = 16; - source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - source_dev_tab.dev_intlevel = 0; - source_dev_tab.dev_intpolarity = 0; - - /* init device table for target - static bus controller - */ - target_dev_tab.dev_id = DSCR_CMD0_ALWAYS; - target_dev_tab.dev_tsize = 1; - target_dev_tab.dev_devwidth = 16; - target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - target_dev_tab.dev_intlevel = 0; - target_dev_tab.dev_intpolarity = 0; - target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE; - - sprintf(&warning_output[0][0], - "%s is not on ide driver white list.", - auide_hwif.drive->id->model); - for ( i=strlen(&warning_output[0][0]) ; i<76; i++ ){ - sprintf(&warning_output[0][i]," "); - } - - sprintf(&warning_output[1][0], - "To add %s please read 'Documentation/mips/AU1xxx_IDE.README'.", - auide_hwif.drive->id->model); - for ( i=strlen(&warning_output[1][0]) ; i<76; i++ ){ - sprintf(&warning_output[1][i]," "); - } - - printk("\n****************************************"); - printk("****************************************\n"); - printk("* %s *\n",&warning_output[0][0]); - printk("* Switch to safe MWDMA Mode! "); - printk(" *\n"); - printk("* %s *\n",&warning_output[1][0]); - printk("****************************************"); - printk("****************************************\n\n"); - } +#ifdef IDE_AU1XXX_BURSTMODE + flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; #else - source_dev_tab.dev_id = DSCR_CMD0_ALWAYS; - source_dev_tab.dev_tsize = 8; - source_dev_tab.dev_devwidth = 32; - source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; - source_dev_tab.dev_intlevel = 0; - source_dev_tab.dev_intpolarity = 0; + flags = DEV_FLAGS_SYNC; #endif -#if CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - /* set flags for tx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_OUT - | DEV_FLAGS_SYNC - | DEV_FLAGS_BURSTABLE; - auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - /* set flags for rx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_IN - | DEV_FLAGS_SYNC - | DEV_FLAGS_BURSTABLE; - auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); -#else - /* set flags for tx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_OUT | DEV_FLAGS_SYNC; - auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - /* set flags for rx channel */ - source_dev_tab.dev_flags = DEV_FLAGS_IN | DEV_FLAGS_SYNC; - auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); -#endif + /* setup dev_tab for tx channel */ + auide_init_dbdma_dev( &source_dev_tab, + (u32)DSCR_CMD0_ALWAYS, + 8, 32, DEV_FLAGS_OUT | flags); + auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - - auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); - - /* Get a channel for TX */ - auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, - auide->tx_dev_id, - auide_ddma_tx_callback, - (void*)auide); - /* Get a channel for RX */ - auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, - auide->target_dev_id, - auide_ddma_rx_callback, - (void*)auide); -#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ - /* - * Note: if call back is not enabled, update ctp->cur_ptr manually - */ - auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, - auide->tx_dev_id, - NULL, - (void*)auide); - auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, - DSCR_CMD0_ALWAYS, - NULL, - (void*)auide); -#endif - auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, - NUM_DESCRIPTORS); - auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, - NUM_DESCRIPTORS); - -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - hwif->dmatable_cpu = dma_alloc_coherent(auide->dev, - PRD_ENTRIES * PRD_BYTES, /* 1 Page */ - &hwif->dmatable_dma, GFP_KERNEL); - - auide->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES, - GFP_KERNEL|GFP_DMA); - if (auide->sg_table == NULL) { - return -ENOMEM; - } -#endif - au1xxx_dbdma_start( auide->tx_chan ); - au1xxx_dbdma_start( auide->rx_chan ); - return 0; + auide_init_dbdma_dev( &source_dev_tab, + (u32)DSCR_CMD0_ALWAYS, + 8, 32, DEV_FLAGS_IN | flags); + auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + + /* Get a channel for TX */ + auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, + auide->tx_dev_id, + NULL, + (void*)auide); + + /* Get a channel for RX */ + auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, + DSCR_CMD0_ALWAYS, + NULL, + (void*)auide); + + auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, + NUM_DESCRIPTORS); + auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, + NUM_DESCRIPTORS); + + au1xxx_dbdma_start( auide->tx_chan ); + au1xxx_dbdma_start( auide->rx_chan ); + + return 0; } +#endif static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) { - int i; -#define ide_ioreg_t unsigned long - ide_ioreg_t *ata_regs = hw->io_ports; + int i; + unsigned long *ata_regs = hw->io_ports; - /* fixme */ - for (i = 0; i < IDE_CONTROL_OFFSET; i++) { - *ata_regs++ = (ide_ioreg_t) ahwif->regbase - + (ide_ioreg_t)(i << AU1XXX_ATA_REG_OFFSET); - } + /* FIXME? */ + for (i = 0; i < IDE_CONTROL_OFFSET; i++) { + *ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET); + } - /* set the Alternative Status register */ - *ata_regs = (ide_ioreg_t) ahwif->regbase - + (ide_ioreg_t)(14 << AU1XXX_ATA_REG_OFFSET); + /* set the Alternative Status register */ + *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); } static int au_ide_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - _auide_hwif *ahwif = &auide_hwif; - ide_hwif_t *hwif; + _auide_hwif *ahwif = &auide_hwif; + ide_hwif_t *hwif; struct resource *res; int ret = 0; #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) - char *mode = "MWDMA2"; + char *mode = "MWDMA2"; #elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) - char *mode = "PIO+DDMA(offload)"; + char *mode = "PIO+DDMA(offload)"; #endif - memset(&auide_hwif, 0, sizeof(_auide_hwif)); - auide_hwif.dev = 0; + memset(&auide_hwif, 0, sizeof(_auide_hwif)); + auide_hwif.dev = 0; ahwif->dev = dev; ahwif->irq = platform_get_irq(pdev, 0); @@ -902,11 +675,11 @@ static int au_ide_probe(struct device *dev) goto out; } - if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { + if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { pr_debug("%s: request_mem_region failed\n", DRV_NAME); - ret = -EBUSY; + ret = -EBUSY; goto out; - } + } ahwif->regbase = (u32)ioremap(res->start, res->end-res->start); if (ahwif->regbase == 0) { @@ -914,130 +687,92 @@ static int au_ide_probe(struct device *dev) goto out; } - hwif = &ide_hwifs[pdev->id]; - hw_regs_t *hw = &hwif->hw; - hwif->irq = hw->irq = ahwif->irq; - hwif->chipset = ide_au1xxx; + /* FIXME: This might possibly break PCMCIA IDE devices */ - auide_setup_ports(hw, ahwif); + hwif = &ide_hwifs[pdev->id]; + hw_regs_t *hw = &hwif->hw; + hwif->irq = hw->irq = ahwif->irq; + hwif->chipset = ide_au1xxx; + + auide_setup_ports(hw, ahwif); memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - hwif->rqsize = CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ; - hwif->rqsize = ((hwif->rqsize > AU1XXX_ATA_RQSIZE) - || (hwif->rqsize < 32)) ? AU1XXX_ATA_RQSIZE : hwif->rqsize; -#else /* if kernel config is not set */ - hwif->rqsize = AU1XXX_ATA_RQSIZE; -#endif - - hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ + hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ - hwif->swdma_mask = 0x07; + hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ + hwif->swdma_mask = 0x00; #else - hwif->mwdma_mask = 0x0; - hwif->swdma_mask = 0x0; + hwif->mwdma_mask = 0x0; + hwif->swdma_mask = 0x0; #endif - //hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; - hwif->noprobe = 0; - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - /* hold should be on in all cases */ - hwif->hold = 1; - hwif->mmio = 2; + hwif->noprobe = 0; + hwif->drives[0].unmask = 1; + hwif->drives[1].unmask = 1; - /* set up local I/O function entry points */ - hwif->INB = auide_inb; - hwif->INW = auide_inw; - hwif->INL = auide_inl; - hwif->INSW = auide_insw; - hwif->INSL = auide_insl; - hwif->OUTB = auide_outb; - hwif->OUTBSYNC = auide_outbsync; - hwif->OUTW = auide_outw; - hwif->OUTL = auide_outl; - hwif->OUTSW = auide_outsw; - hwif->OUTSL = auide_outsl; + /* hold should be on in all cases */ + hwif->hold = 1; + hwif->mmio = 2; - hwif->tuneproc = &auide_tune_drive; - hwif->speedproc = &auide_tune_chipset; + /* If the user has selected DDMA assisted copies, + then set up a few local I/O function entry points + */ + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA + hwif->INSW = auide_insw; + hwif->OUTSW = auide_outsw; +#endif + + hwif->tuneproc = &auide_tune_drive; + hwif->speedproc = &auide_tune_chipset; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->ide_dma_off_quietly = &auide_dma_off_quietly; - hwif->ide_dma_timeout = &auide_dma_timeout; + hwif->ide_dma_off_quietly = &auide_dma_off_quietly; + hwif->ide_dma_timeout = &auide_dma_timeout; - hwif->ide_dma_check = &auide_dma_check; - hwif->dma_exec_cmd = &auide_dma_exec_cmd; - hwif->dma_start = &auide_dma_start; - hwif->ide_dma_end = &auide_dma_end; - hwif->dma_setup = &auide_dma_setup; - hwif->ide_dma_test_irq = &auide_dma_test_irq; - hwif->ide_dma_host_off = &auide_dma_host_off; - hwif->ide_dma_host_on = &auide_dma_host_on; - hwif->ide_dma_lostirq = &auide_dma_lostirq; - hwif->ide_dma_on = &auide_dma_on; + hwif->ide_dma_check = &auide_dma_check; + hwif->dma_exec_cmd = &auide_dma_exec_cmd; + hwif->dma_start = &auide_dma_start; + hwif->ide_dma_end = &auide_dma_end; + hwif->dma_setup = &auide_dma_setup; + hwif->ide_dma_test_irq = &auide_dma_test_irq; + hwif->ide_dma_host_off = &auide_dma_host_off; + hwif->ide_dma_host_on = &auide_dma_host_on; + hwif->ide_dma_lostirq = &auide_dma_lostirq; + hwif->ide_dma_on = &auide_dma_on; + + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + hwif->atapi_dma = 1; - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; - hwif->atapi_dma = 1; - hwif->drives[0].using_dma = 1; - hwif->drives[1].using_dma = 1; #else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ - hwif->autodma = 0; - hwif->channel = 0; - hwif->hold = 1; - hwif->select_data = 0; /* no chipset-specific code */ - hwif->config_data = 0; /* no chipset-specific code */ + hwif->autodma = 0; + hwif->channel = 0; + hwif->hold = 1; + hwif->select_data = 0; /* no chipset-specific code */ + hwif->config_data = 0; /* no chipset-specific code */ - hwif->drives[0].autodma = 0; - hwif->drives[0].drive_data = 0; /* no drive data */ - hwif->drives[0].using_dma = 0; - hwif->drives[0].waiting_for_dma = 0; - hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ - /* secondary hdd not supported */ - hwif->drives[1].autodma = 0; - - hwif->drives[1].drive_data = 0; - hwif->drives[1].using_dma = 0; - hwif->drives[1].waiting_for_dma = 0; - hwif->drives[1].autotune = 2; /* 1=autotune, 2=noautotune, 0=default */ + hwif->drives[0].autodma = 0; + hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ #endif - hwif->drives[0].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ - hwif->drives[1].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ + hwif->drives[0].no_io_32bit = 1; - /*Register Driver with PM Framework*/ -#ifdef CONFIG_PM - auide_hwif.pm.lock = SPIN_LOCK_UNLOCKED; - auide_hwif.pm.stopped = 0; + auide_hwif.hwif = hwif; + hwif->hwif_data = &auide_hwif; - auide_hwif.pm.dev = new_au1xxx_power_device( "ide", - &au1200ide_pm_callback, - NULL); - if ( auide_hwif.pm.dev == NULL ) - printk(KERN_INFO "Unable to create a power management \ - device entry for the au1200-IDE.\n"); - else - printk(KERN_INFO "Power management device entry for the \ - au1200-IDE loaded.\n"); -#endif - - auide_hwif.hwif = hwif; - hwif->hwif_data = &auide_hwif; - -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA + auide_ddma_init(&auide_hwif); + dbdma_init_done = 1; #endif probe_hwif_init(hwif); dev_set_drvdata(dev, hwif); - printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); + printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); -out: - return ret; + out: + return ret; } static int au_ide_remove(struct device *dev) @@ -1045,7 +780,7 @@ static int au_ide_remove(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct resource *res; ide_hwif_t *hwif = dev_get_drvdata(dev); - _auide_hwif *ahwif = &auide_hwif; + _auide_hwif *ahwif = &auide_hwif; ide_unregister(hwif - ide_hwifs); @@ -1069,180 +804,11 @@ static int __init au_ide_init(void) return driver_register(&au1200_ide_driver); } -static void __init au_ide_exit(void) +static void __exit au_ide_exit(void) { driver_unregister(&au1200_ide_driver); } -#ifdef CONFIG_PM -int au1200ide_pm_callback( au1xxx_power_dev_t *dev,\ - au1xxx_request_t request, void *data) { - - unsigned int d, err = 0; - unsigned long flags; - - spin_lock_irqsave(auide_hwif.pm.lock, flags); - - switch (request){ - case AU1XXX_PM_SLEEP: - err = au1xxxide_pm_sleep(dev); - break; - case AU1XXX_PM_WAKEUP: - d = *((unsigned int*)data); - if ( d > 0 && d <= 99) { - err = au1xxxide_pm_standby(dev); - } - else { - err = au1xxxide_pm_resume(dev); - } - break; - case AU1XXX_PM_GETSTATUS: - err = au1xxxide_pm_getstatus(dev); - break; - case AU1XXX_PM_ACCESS: - err = au1xxxide_pm_access(dev); - break; - case AU1XXX_PM_IDLE: - err = au1xxxide_pm_idle(dev); - break; - case AU1XXX_PM_CLEANUP: - err = au1xxxide_pm_cleanup(dev); - break; - default: - err = -1; - break; - } - - spin_unlock_irqrestore(auide_hwif.pm.lock, flags); - - return err; -} - -static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ) { - return 0; -} - -static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ) { - - int retval; - ide_hwif_t *hwif = auide_hwif.hwif; - struct request rq; - struct request_pm_state rqpm; - ide_task_t args; - - if(auide_hwif.pm.stopped) - return -1; - - /* - * wait until hard disc is ready - */ - if ( wait_for_ready(&hwif->drives[0], 35000) ) { - printk("Wait for drive sleep timeout!\n"); - retval = -1; - } - - /* - * sequenz to tell the high level ide driver that pm is resuming - */ - memset(&rq, 0, sizeof(rq)); - memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); - rq.flags = REQ_PM_SUSPEND; - rq.special = &args; - rq.pm = &rqpm; - rqpm.pm_step = ide_pm_state_start_suspend; - rqpm.pm_state = PMSG_SUSPEND; - - retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_wait); - - if (wait_for_ready (&hwif->drives[0], 35000)) { - printk("Wait for drive sleep timeout!\n"); - retval = -1; - } - - /* - * stop dbdma channels - */ - au1xxx_dbdma_reset(auide_hwif.tx_chan); - au1xxx_dbdma_reset(auide_hwif.rx_chan); - - auide_hwif.pm.stopped = 1; - - return retval; -} - -static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ) { - - int retval; - ide_hwif_t *hwif = auide_hwif.hwif; - struct request rq; - struct request_pm_state rqpm; - ide_task_t args; - - if(!auide_hwif.pm.stopped) - return -1; - - /* - * start dbdma channels - */ - au1xxx_dbdma_start(auide_hwif.tx_chan); - au1xxx_dbdma_start(auide_hwif.rx_chan); - - /* - * wait until hard disc is ready - */ - if (wait_for_ready ( &hwif->drives[0], 35000)) { - printk("Wait for drive wake up timeout!\n"); - retval = -1; - } - - /* - * sequenz to tell the high level ide driver that pm is resuming - */ - memset(&rq, 0, sizeof(rq)); - memset(&rqpm, 0, sizeof(rqpm)); - memset(&args, 0, sizeof(args)); - rq.flags = REQ_PM_RESUME; - rq.special = &args; - rq.pm = &rqpm; - rqpm.pm_step = ide_pm_state_start_resume; - rqpm.pm_state = PMSG_ON; - - retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_head_wait); - - /* - * wait for hard disc - */ - if ( wait_for_ready(&hwif->drives[0], 35000) ) { - printk("Wait for drive wake up timeout!\n"); - retval = -1; - } - - auide_hwif.pm.stopped = 0; - - return retval; -} - -static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ) { - return dev->cur_state; -} - -static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ) { - if (dev->cur_state != AWAKE_STATE) - return 0; - else - return -1; -} - -static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ) { - return 0; -} - -static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ) { - return 0; -} -#endif /* CONFIG_PM */ - MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("AU1200 IDE driver"); diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 0c3c127e619e..e867b4ef96d1 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -74,9 +74,6 @@ typedef struct u8 white_list, black_list; struct dbdma_cmd *dma_table_cpu; dma_addr_t dma_table_dma; - struct scatterlist *sg_table; - int sg_nents; - int sg_dma_direction; #endif struct device *dev; int irq; @@ -162,13 +159,9 @@ int __init auide_probe(void); * Multi-Word DMA + DbDMA functions */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - - static int in_drive_list(struct hd_driveid *id, - const struct drive_list_entry *drive_table); static int auide_build_sglist(ide_drive_t *drive, struct request *rq); static int auide_build_dmatable(ide_drive_t *drive); static int auide_dma_end(ide_drive_t *drive); - static void auide_dma_start(ide_drive_t *drive ); ide_startstop_t auide_dma_intr (ide_drive_t *drive); static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command); static int auide_dma_setup(ide_drive_t *drive); @@ -183,8 +176,6 @@ int __init auide_probe(void); static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs); static int auide_dma_off_quietly(ide_drive_t *drive); - static int auide_dma_timeout(ide_drive_t *drive); - #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ /******************************************************************************* @@ -294,3 +285,11 @@ int __init auide_probe(void); #define SBC_IDE_MDMA2_TPM (0x00<<6) #define SBC_IDE_MDMA2_TA (0x12<<0) +#define SBC_IDE_TIMING(mode) \ + SBC_IDE_##mode##_TWCS | \ + SBC_IDE_##mode##_TCSH | \ + SBC_IDE_##mode##_TCSOFF | \ + SBC_IDE_##mode##_TWP | \ + SBC_IDE_##mode##_TCSW | \ + SBC_IDE_##mode##_TPM | \ + SBC_IDE_##mode##_TA From d36fef6f5aa4a6a1f44490455393a5b22137a6cd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 15 Dec 2005 02:19:20 +0100 Subject: [PATCH 21/28] [PATCH] ide-disk: flush cache after calling del_gendisk() Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index f4e3d3527b0e..449522f0540c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1034,12 +1034,12 @@ static int ide_disk_remove(struct device *dev) struct ide_disk_obj *idkp = drive->driver_data; struct gendisk *g = idkp->disk; - ide_cacheflush_p(drive); - ide_unregister_subdriver(drive, idkp->driver); del_gendisk(g); + ide_cacheflush_p(drive); + ide_disk_put(idkp); return 0; From 517bd1d5eac739a7f398058a9524386667fff032 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 15 Dec 2005 02:19:57 +0100 Subject: [PATCH 22/28] [PATCH] ide: cleanup ide.h Remove: * stale comment * unused HOST() macro * unused ata_{error,control}_t types * unused atapi_select_t type * ide_init_subdrivers() prototype Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 122 -------------------------------------------- 1 file changed, 122 deletions(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index a6b28dcf8f0d..613534b77054 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -23,17 +23,6 @@ #include #include -/* - * This is the multiple IDE interface driver, as evolved from hd.c. - * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15). - * There can be up to two drives per interface, as per the ATA-2 spec. - * - * Primary i/f: ide0: major=3; (hda) minor=0; (hdb) minor=64 - * Secondary i/f: ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64 - * Tertiary i/f: ide2: major=33; (hde) minor=0; (hdf) minor=64 - * Quaternary i/f: ide3: major=34; (hdg) minor=0; (hdh) minor=64 - */ - /****************************************************************************** * IDE driver configuration options (play with these as desired): * @@ -193,11 +182,6 @@ typedef unsigned char byte; /* used everywhere */ #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ -#define HOST(hwif,chipset) \ -{ \ - return ((hwif)->chipset == chipset) ? 1 : 0; \ -} - /* * Check for an interrupt and acknowledge the interrupt status */ @@ -390,45 +374,6 @@ typedef union { } b; } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t; -/* - * ATA-IDE Error Register - * - * mark : Bad address mark - * tzero : Couldn't find track 0 - * abrt : Aborted Command - * mcr : Media Change Request - * id : ID field not found - * mce : Media Change Event - * ecc : Uncorrectable ECC error - * bdd : dual meaing - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned mark :1; - unsigned tzero :1; - unsigned abrt :1; - unsigned mcr :1; - unsigned id :1; - unsigned mce :1; - unsigned ecc :1; - unsigned bdd :1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned bdd :1; - unsigned ecc :1; - unsigned mce :1; - unsigned id :1; - unsigned mcr :1; - unsigned abrt :1; - unsigned tzero :1; - unsigned mark :1; -#else -#error "Please fix " -#endif - } b; -} ata_error_t; - /* * ATA-IDE Select Register, aka Device-Head * @@ -503,39 +448,6 @@ typedef union { } b; } ata_status_t, atapi_status_t; -/* - * ATA-IDE Control Register - * - * bit0 : Should be set to zero - * nIEN : device INTRQ to host - * SRST : host soft reset bit - * bit3 : ATA-2 thingy, Should be set to 1 - * reserved456 : Reserved - * HOB : 48-bit address ordering, High Ordered Bit - */ -typedef union { - unsigned all : 8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned bit0 : 1; - unsigned nIEN : 1; - unsigned SRST : 1; - unsigned bit3 : 1; - unsigned reserved456 : 3; - unsigned HOB : 1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned HOB : 1; - unsigned reserved456 : 3; - unsigned bit3 : 1; - unsigned SRST : 1; - unsigned nIEN : 1; - unsigned bit0 : 1; -#else -#error "Please fix " -#endif - } b; -} ata_control_t; - /* * ATAPI Feature Register * @@ -617,39 +529,6 @@ typedef union { } b; } atapi_error_t; -/* - * ATAPI floppy Drive Select Register - * - * sam_lun : Logical unit number - * reserved3 : Reserved - * drv : The responding drive will be drive 0 (0) or drive 1 (1) - * one5 : Should be set to 1 - * reserved6 : Reserved - * one7 : Should be set to 1 - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned sam_lun :3; - unsigned reserved3 :1; - unsigned drv :1; - unsigned one5 :1; - unsigned reserved6 :1; - unsigned one7 :1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned one7 :1; - unsigned reserved6 :1; - unsigned one5 :1; - unsigned drv :1; - unsigned reserved3 :1; - unsigned sam_lun :3; -#else -#error "Please fix " -#endif - } b; -} atapi_select_t; - /* * Status returned from various ide_ functions */ @@ -1298,7 +1177,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *); extern void ide_timer_expiry(unsigned long); extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs); extern void do_ide_request(request_queue_t *); -extern void ide_init_subdrivers(void); void ide_init_disk(struct gendisk *, ide_drive_t *); From 7b4df9ece9b4c4a754bd1f5603cdabff26b987e5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 15 Dec 2005 02:20:15 +0100 Subject: [PATCH 23/28] [PATCH] ide: cleanup ide_driver_t Remove unused fields: ioctl, ata[pi]_prebuilder. Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index 613534b77054..7b6a6a58e465 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -980,10 +980,7 @@ typedef struct ide_driver_s { int (*end_request)(ide_drive_t *, int, int); ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8); ide_startstop_t (*abort)(ide_drive_t *, struct request *rq); - int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long); ide_proc_entry_t *proc; - void (*ata_prebuilder)(ide_drive_t *); - void (*atapi_prebuilder)(ide_drive_t *); struct device_driver gen_driver; } ide_driver_t; From 0afaa4fc4abc773ce129f41009a50eeecf3aa50c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 15 Dec 2005 02:20:49 +0100 Subject: [PATCH 24/28] [PATCH] ide-cd: remove write-only cmd field from struct cdrom_info Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 7 ------- drivers/ide/ide-cd.h | 1 - 2 files changed, 8 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 9455e42abb23..b4d7a3efb90f 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1292,7 +1292,6 @@ static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block) struct cdrom_info *info = drive->driver_data; info->dma = 0; - info->cmd = 0; info->start_seek = jiffies; return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation); } @@ -1344,8 +1343,6 @@ static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block) (rq->nr_sectors & (sectors_per_frame - 1))) info->dma = 0; - info->cmd = READ; - /* Start sending the read request to the drive. */ return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation); } @@ -1484,7 +1481,6 @@ static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive) struct cdrom_info *info = drive->driver_data; info->dma = 0; - info->cmd = 0; rq->flags &= ~REQ_FAILED; len = rq->data_len; @@ -1891,7 +1887,6 @@ static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq) /* use dma, if possible. we don't need to check more, since we * know that the transfer is always (at least!) frame aligned */ info->dma = drive->using_dma ? 1 : 0; - info->cmd = WRITE; info->devinfo.media_written = 1; @@ -1916,7 +1911,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) rq->flags |= REQ_QUIET; info->dma = 0; - info->cmd = 0; /* * sg request @@ -1925,7 +1919,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) int mask = drive->queue->dma_alignment; unsigned long addr = (unsigned long) page_address(bio_page(rq->bio)); - info->cmd = rq_data_dir(rq); info->dma = drive->using_dma; /* diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 7ca3e5afc665..ad1f2ed14a37 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -480,7 +480,6 @@ struct cdrom_info { struct request request_sense_request; int dma; - int cmd; unsigned long last_block; unsigned long start_seek; /* Buffer to hold mechanism status and changer slot table. */ From c45b4f1f1e149c023762ac4be166ead1818cefef Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 14 Dec 2005 18:52:21 -0800 Subject: [PATCH 25/28] Move size optimization option outside of EMBEDDED menu, mark it EXPERIMENTAL Also, disable on sparc64 - a number of people report breakage. Probably a compiler bug, but it's quite possible that it tickles some latent kernel problem too. It still defaults to 'y' everywhere else (when enabled through EXPERIMENTAL), and Dave Jones points out that Fedora (and RHEL4) has been building with size optimizations for a long time on x86, x86-64, ia64, s390, s390x, ppc32 and ppc64. So it is really only moderately experimental, but the sparc64 breakage certainly shows that it can trigger "issues". Signed-off-by: Linus Torvalds --- init/Kconfig | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index be74adb389ea..6c5dbedc6e96 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -256,6 +256,20 @@ config CPUSETS source "usr/Kconfig" +config CC_OPTIMIZE_FOR_SIZE + bool "Optimize for size (Look out for broken compilers!)" + default y + depends on ARM || H8300 || EXPERIMENTAL + depends on !SPARC64 + help + Enabling this option will pass "-Os" instead of "-O2" to gcc + resulting in a smaller kernel. + + WARNING: some versions of gcc may generate incorrect code with this + option. If problems are observed, a gcc upgrade may be needed. + + If unsure, say N. + menuconfig EMBEDDED bool "Configure standard kernel features (for small systems)" help @@ -338,18 +352,6 @@ config EPOLL Disabling this option will cause the kernel to be built without support for epoll family of system calls. -config CC_OPTIMIZE_FOR_SIZE - bool "Optimize for size" - default y if ARM || H8300 - help - Enabling this option will pass "-Os" instead of "-O2" to gcc - resulting in a smaller kernel. - - WARNING: some versions of gcc may generate incorrect code with this - option. If problems are observed, a gcc upgrade may be needed. - - If unsure, say N. - config SHMEM bool "Use full shmem filesystem" if EMBEDDED default y From ea54c96c04cfd9fec881e403d8f7931b47f7b2a6 Mon Sep 17 00:00:00 2001 From: Vojtech Pavlik Date: Wed, 14 Dec 2005 21:47:00 -0500 Subject: [PATCH 26/28] [PATCH] Input: ALPS - correctly report button presses on Fujitsu Siemens S6010 Without this patch Forward and Backward buttons on the touchpad do not generate any events. Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/mouse/alps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 4acc7fd4cd0f..4f41ec3e4332 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -42,7 +42,7 @@ static struct alps_model_info alps_model_data[] = { { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, { { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, 0 }, + { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ { { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ { { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ { { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, From 5d5e815618c4a8b53806845268c951201d14af6e Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 14 Dec 2005 14:38:36 -0500 Subject: [PATCH 27/28] [PATCH] reiserfs: skip commit on io error This should have been part of the original io error patch, but got dropped somewhere along the way. It's extremely important when handling the i/o error in the journal to not commit the transaction with corrupt data. This patch adds that code back in. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/journal.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 68b7b78638ff..3f17ef844fb6 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -1039,6 +1039,10 @@ static int flush_commit_list(struct super_block *s, } atomic_dec(&journal->j_async_throttle); + /* We're skipping the commit if there's an error */ + if (retval || reiserfs_is_journal_aborted(journal)) + barrier = 0; + /* wait on everything written so far before writing the commit * if we are in barrier mode, send the commit down now */ @@ -1077,10 +1081,16 @@ static int flush_commit_list(struct super_block *s, BUG_ON(atomic_read(&(jl->j_commit_left)) != 1); if (!barrier) { - if (buffer_dirty(jl->j_commit_bh)) - BUG(); - mark_buffer_dirty(jl->j_commit_bh); - sync_dirty_buffer(jl->j_commit_bh); + /* If there was a write error in the journal - we can't commit + * this transaction - it will be invalid and, if successful, + * will just end up propogating the write error out to + * the file system. */ + if (likely(!retval && !reiserfs_is_journal_aborted (journal))) { + if (buffer_dirty(jl->j_commit_bh)) + BUG(); + mark_buffer_dirty(jl->j_commit_bh) ; + sync_dirty_buffer(jl->j_commit_bh) ; + } } else wait_on_buffer(jl->j_commit_bh); From 2499604960fff307fe99ff4d4363c50eaa69235a Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 14 Dec 2005 14:38:05 -0500 Subject: [PATCH 28/28] [PATCH] reiserfs: close open transactions on error path The following patch fixes a bug where if the journal is aborted, it can leave a transaction open. The result will be a BUG when another code path attempts to start a transaction and will get a "nesting into different fs" error, since current->journal_info will be left non-NULL. Original fix against SUSE kernel by Chris Mason Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/inode.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 0a044ad98885..a5e3a0ddbe53 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -32,6 +32,7 @@ void reiserfs_delete_inode(struct inode *inode) JOURNAL_PER_BALANCE_CNT * 2 + 2 * REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb); struct reiserfs_transaction_handle th; + int err; truncate_inode_pages(&inode->i_data, 0); @@ -49,15 +50,13 @@ void reiserfs_delete_inode(struct inode *inode) } reiserfs_update_inode_transaction(inode); - if (reiserfs_delete_object(&th, inode)) { - up(&inode->i_sem); - goto out; - } + err = reiserfs_delete_object(&th, inode); /* Do quota update inside a transaction for journaled quotas. We must do that * after delete_object so that quota updates go into the same transaction as * stat data deletion */ - DQUOT_FREE_INODE(inode); + if (!err) + DQUOT_FREE_INODE(inode); if (journal_end(&th, inode->i_sb, jbegin_count)) { up(&inode->i_sem); @@ -66,6 +65,12 @@ void reiserfs_delete_inode(struct inode *inode) up(&inode->i_sem); + /* check return value from reiserfs_delete_object after + * ending the transaction + */ + if (err) + goto out; + /* all items of file are deleted, so we can remove "save" link */ remove_save_link(inode, 0 /* not truncate */ ); /* we can't do anything * about an error here */ @@ -2099,6 +2104,7 @@ int reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps) struct page *page = NULL; int error; struct buffer_head *bh = NULL; + int err2; reiserfs_write_lock(p_s_inode->i_sb); @@ -2136,14 +2142,18 @@ int reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps) transaction of truncating gets committed - on reboot the file either appears truncated properly or not truncated at all */ add_save_link(&th, p_s_inode, 1); - error = reiserfs_do_truncate(&th, p_s_inode, page, update_timestamps); - if (error) - goto out; + err2 = reiserfs_do_truncate(&th, p_s_inode, page, update_timestamps); error = journal_end(&th, p_s_inode->i_sb, JOURNAL_PER_BALANCE_CNT * 2 + 1); if (error) goto out; + /* check reiserfs_do_truncate after ending the transaction */ + if (err2) { + error = err2; + goto out; + } + if (update_timestamps) { error = remove_save_link(p_s_inode, 1 /* truncate */ ); if (error)