USB: add urb->ep
This patch (as943) prepares the way for eliminating urb->pipe by introducing an endpoint pointer into struct urb. For now urb->ep is set by usb_submit_urb() from the pipe value; eventually drivers will set it themselves and we will remove urb->pipe completely. The patch also adds new inline routines to retrieve an endpoint descriptor's number and transfer type, essentially as replacements for usb_pipeendpoint and usb_pipetype. usb_submit_urb(), usb_hcd_submit_urb(), and usb_hcd_unlink_urb() are converted to use the new field and new routines. Other parts of usbcore will be converted in later patches. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
a96173af52
commit
5b653c79c0
|
@ -962,14 +962,14 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
|
|||
spin_lock_irqsave(&hcd_urb_list_lock, flags);
|
||||
ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
|
||||
[usb_pipeendpoint(urb->pipe)];
|
||||
if (unlikely (!ep))
|
||||
if (unlikely(ep != urb->ep))
|
||||
status = -ENOENT;
|
||||
else if (unlikely (urb->reject))
|
||||
status = -EPERM;
|
||||
else switch (hcd->state) {
|
||||
case HC_STATE_RUNNING:
|
||||
case HC_STATE_RESUMING:
|
||||
list_add_tail (&urb->urb_list, &ep->urb_list);
|
||||
list_add_tail (&urb->urb_list, &urb->ep->urb_list);
|
||||
status = 0;
|
||||
break;
|
||||
default:
|
||||
|
@ -1022,7 +1022,7 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
|
|||
: DMA_TO_DEVICE);
|
||||
}
|
||||
|
||||
status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags);
|
||||
status = hcd->driver->urb_enqueue (hcd, urb->ep, urb, mem_flags);
|
||||
done:
|
||||
if (unlikely (status)) {
|
||||
urb_unlink(hcd, urb);
|
||||
|
@ -1071,7 +1071,6 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb)
|
|||
*/
|
||||
int usb_hcd_unlink_urb (struct urb *urb, int status)
|
||||
{
|
||||
struct usb_host_endpoint *ep;
|
||||
struct usb_hcd *hcd = NULL;
|
||||
struct device *sys = NULL;
|
||||
unsigned long flags;
|
||||
|
@ -1082,10 +1081,6 @@ int usb_hcd_unlink_urb (struct urb *urb, int status)
|
|||
return -EINVAL;
|
||||
if (!urb->dev || !urb->dev->bus)
|
||||
return -ENODEV;
|
||||
ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
|
||||
[usb_pipeendpoint(urb->pipe)];
|
||||
if (!ep)
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* we contend for urb->status with the hcd core,
|
||||
|
@ -1109,7 +1104,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status)
|
|||
}
|
||||
|
||||
/* insist the urb is still queued */
|
||||
list_for_each(tmp, &ep->urb_list) {
|
||||
list_for_each(tmp, &urb->ep->urb_list) {
|
||||
if (tmp == &urb->urb_list)
|
||||
break;
|
||||
}
|
||||
|
|
|
@ -277,9 +277,10 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
|
|||
*/
|
||||
int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
|
||||
{
|
||||
int pipe, temp, max;
|
||||
struct usb_device *dev;
|
||||
int is_out;
|
||||
int xfertype, max;
|
||||
struct usb_device *dev;
|
||||
struct usb_host_endpoint *ep;
|
||||
int is_out;
|
||||
|
||||
if (!urb || urb->hcpriv || !urb->complete)
|
||||
return -EINVAL;
|
||||
|
@ -291,30 +292,34 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
|
|||
|| dev->state == USB_STATE_SUSPENDED)
|
||||
return -EHOSTUNREACH;
|
||||
|
||||
/* For now, get the endpoint from the pipe. Eventually drivers
|
||||
* will be required to set urb->ep directly and we will eliminate
|
||||
* urb->pipe.
|
||||
*/
|
||||
ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
|
||||
[usb_pipeendpoint(urb->pipe)];
|
||||
if (!ep)
|
||||
return -ENOENT;
|
||||
|
||||
urb->ep = ep;
|
||||
urb->status = -EINPROGRESS;
|
||||
urb->actual_length = 0;
|
||||
|
||||
/* Lots of sanity checks, so HCDs can rely on clean data
|
||||
* and don't need to duplicate tests
|
||||
*/
|
||||
pipe = urb->pipe;
|
||||
temp = usb_pipetype(pipe);
|
||||
is_out = usb_pipeout(pipe);
|
||||
xfertype = usb_endpoint_type(&ep->desc);
|
||||
is_out = usb_pipeout(urb->pipe);
|
||||
|
||||
if (!usb_pipecontrol(pipe) && dev->state < USB_STATE_CONFIGURED)
|
||||
if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
|
||||
dev->state < USB_STATE_CONFIGURED)
|
||||
return -ENODEV;
|
||||
|
||||
/* FIXME there should be a sharable lock protecting us against
|
||||
* config/altsetting changes and disconnects, kicking in here.
|
||||
* (here == before maxpacket, and eventually endpoint type,
|
||||
* checks get made.)
|
||||
*/
|
||||
|
||||
max = usb_maxpacket(dev, pipe, is_out);
|
||||
max = le16_to_cpu(ep->desc.wMaxPacketSize);
|
||||
if (max <= 0) {
|
||||
dev_dbg(&dev->dev,
|
||||
"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
|
||||
usb_pipeendpoint(pipe), is_out ? "out" : "in",
|
||||
usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
|
||||
__FUNCTION__, max);
|
||||
return -EMSGSIZE;
|
||||
}
|
||||
|
@ -323,7 +328,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
|
|||
* but drivers only control those sizes for ISO.
|
||||
* while we're checking, initialize return status.
|
||||
*/
|
||||
if (temp == PIPE_ISOCHRONOUS) {
|
||||
if (xfertype == USB_ENDPOINT_XFER_ISOC) {
|
||||
int n, len;
|
||||
|
||||
/* "high bandwidth" mode, 1-3 packets/uframe? */
|
||||
|
@ -359,19 +364,19 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
|
|||
/* enforce simple/standard policy */
|
||||
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
|
||||
URB_NO_INTERRUPT);
|
||||
switch (temp) {
|
||||
case PIPE_BULK:
|
||||
switch (xfertype) {
|
||||
case USB_ENDPOINT_XFER_BULK:
|
||||
if (is_out)
|
||||
allowed |= URB_ZERO_PACKET;
|
||||
/* FALLTHROUGH */
|
||||
case PIPE_CONTROL:
|
||||
case USB_ENDPOINT_XFER_CONTROL:
|
||||
allowed |= URB_NO_FSBR; /* only affects UHCI */
|
||||
/* FALLTHROUGH */
|
||||
default: /* all non-iso endpoints */
|
||||
if (!is_out)
|
||||
allowed |= URB_SHORT_NOT_OK;
|
||||
break;
|
||||
case PIPE_ISOCHRONOUS:
|
||||
case USB_ENDPOINT_XFER_ISOC:
|
||||
allowed |= URB_ISO_ASAP;
|
||||
break;
|
||||
}
|
||||
|
@ -393,9 +398,9 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
|
|||
* supports different values... this uses EHCI/UHCI defaults (and
|
||||
* EHCI can use smaller non-default values).
|
||||
*/
|
||||
switch (temp) {
|
||||
case PIPE_ISOCHRONOUS:
|
||||
case PIPE_INTERRUPT:
|
||||
switch (xfertype) {
|
||||
case USB_ENDPOINT_XFER_ISOC:
|
||||
case USB_ENDPOINT_XFER_INT:
|
||||
/* too small? */
|
||||
if (urb->interval <= 0)
|
||||
return -EINVAL;
|
||||
|
@ -405,29 +410,29 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
|
|||
// NOTE usb handles 2^15
|
||||
if (urb->interval > (1024 * 8))
|
||||
urb->interval = 1024 * 8;
|
||||
temp = 1024 * 8;
|
||||
max = 1024 * 8;
|
||||
break;
|
||||
case USB_SPEED_FULL: /* units are frames/msec */
|
||||
case USB_SPEED_LOW:
|
||||
if (temp == PIPE_INTERRUPT) {
|
||||
if (xfertype == USB_ENDPOINT_XFER_INT) {
|
||||
if (urb->interval > 255)
|
||||
return -EINVAL;
|
||||
// NOTE ohci only handles up to 32
|
||||
temp = 128;
|
||||
max = 128;
|
||||
} else {
|
||||
if (urb->interval > 1024)
|
||||
urb->interval = 1024;
|
||||
// NOTE usb and ohci handle up to 2^15
|
||||
temp = 1024;
|
||||
max = 1024;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
/* power of two? */
|
||||
while (temp > urb->interval)
|
||||
temp >>= 1;
|
||||
urb->interval = temp;
|
||||
while (max > urb->interval)
|
||||
max >>= 1;
|
||||
urb->interval = max;
|
||||
}
|
||||
|
||||
return usb_hcd_submit_urb(urb, mem_flags);
|
||||
|
|
|
@ -554,6 +554,29 @@ static inline int usb_make_path (struct usb_device *dev, char *buf,
|
|||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* usb_endpoint_num - get the endpoint's number
|
||||
* @epd: endpoint to be checked
|
||||
*
|
||||
* Returns @epd's number: 0 to 15.
|
||||
*/
|
||||
static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
|
||||
{
|
||||
return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
|
||||
}
|
||||
|
||||
/**
|
||||
* usb_endpoint_type - get the endpoint's transfer type
|
||||
* @epd: endpoint to be checked
|
||||
*
|
||||
* Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
|
||||
* to @epd's transfer type.
|
||||
*/
|
||||
static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
|
||||
{
|
||||
return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
|
||||
}
|
||||
|
||||
/**
|
||||
* usb_endpoint_dir_in - check if the endpoint has IN direction
|
||||
* @epd: endpoint to be checked
|
||||
|
@ -1037,6 +1060,8 @@ typedef void (*usb_complete_t)(struct urb *);
|
|||
* @urb_list: For use by current owner of the URB.
|
||||
* @anchor_list: membership in the list of an anchor
|
||||
* @anchor: to anchor URBs to a common mooring
|
||||
* @ep: Points to the endpoint's data structure. Will eventually
|
||||
* replace @pipe.
|
||||
* @pipe: Holds endpoint number, direction, type, and more.
|
||||
* Create these values with the eight macros available;
|
||||
* usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
|
||||
|
@ -1212,6 +1237,7 @@ struct urb
|
|||
struct list_head anchor_list; /* the URB may be anchored by the driver */
|
||||
struct usb_anchor *anchor;
|
||||
struct usb_device *dev; /* (in) pointer to associated device */
|
||||
struct usb_host_endpoint *ep; /* (internal) pointer to endpoint struct */
|
||||
unsigned int pipe; /* (in) pipe information */
|
||||
int status; /* (return) non-ISO status */
|
||||
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
|
||||
|
|
Loading…
Reference in a new issue