Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier. [ARM] Orion: clean up addr-map.c after window setting code purge [ARM] Orion: pass proper t_clk into mv643xx_eth [ARM] Orion: use mv643xx_eth driver mbus window handling [ARM] pxa: Fix RCSR handling [ARM] lubbock: fix compilation [ARM] 5032/1: Added cpufreq support for pxa27x CPU [ARM] 5031/1: Indentation correction in cpu-pxa.c. [ARM] 5028/1: pxafb: fix broken "backward compatibility way" in framebuffer [ARM] 4882/2: Correction for S3C2410 clkout generation [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle. [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver [ARM] 5023/1: Fix broken gpio interrupts on ep93xx ns9xxx: fix sparse warning ns9xxx: check for irq lockups ns9xxx: fix handle_prio_irq to unmask irqs with lower priority
This commit is contained in:
commit
5bb7ff795f
|
@ -280,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
|
|||
const int port = gpio >> 3;
|
||||
const int port_mask = 1 << (gpio & 7);
|
||||
|
||||
gpio_direction_output(gpio, gpio_get_value(gpio));
|
||||
gpio_direction_input(gpio);
|
||||
|
||||
switch (type) {
|
||||
case IRQT_RISING:
|
||||
|
|
|
@ -62,7 +62,7 @@ static struct irq_chip ns9xxx_chip = {
|
|||
#if 0
|
||||
#define handle_irq handle_level_irq
|
||||
#else
|
||||
void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
|
||||
static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
struct irqaction *action;
|
||||
|
@ -70,27 +70,35 @@ void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
|
|||
|
||||
spin_lock(&desc->lock);
|
||||
|
||||
if (unlikely(desc->status & IRQ_INPROGRESS))
|
||||
goto out_unlock;
|
||||
BUG_ON(desc->status & IRQ_INPROGRESS);
|
||||
|
||||
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
|
||||
kstat_cpu(cpu).irqs[irq]++;
|
||||
|
||||
action = desc->action;
|
||||
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
|
||||
goto out_unlock;
|
||||
goto out_mask;
|
||||
|
||||
desc->status |= IRQ_INPROGRESS;
|
||||
spin_unlock(&desc->lock);
|
||||
|
||||
action_ret = handle_IRQ_event(irq, action);
|
||||
|
||||
/* XXX: There is no direct way to access noirqdebug, so check
|
||||
* unconditionally for spurious irqs...
|
||||
* Maybe this function should go to kernel/irq/chip.c? */
|
||||
note_interrupt(irq, desc, action_ret);
|
||||
|
||||
spin_lock(&desc->lock);
|
||||
desc->status &= ~IRQ_INPROGRESS;
|
||||
if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
|
||||
desc->chip->ack(irq);
|
||||
|
||||
out_unlock:
|
||||
if (desc->status & IRQ_DISABLED)
|
||||
out_mask:
|
||||
desc->chip->mask(irq);
|
||||
|
||||
/* ack unconditionally to unmask lower prio irqs */
|
||||
desc->chip->ack(irq);
|
||||
|
||||
spin_unlock(&desc->lock);
|
||||
}
|
||||
#define handle_irq handle_prio_irq
|
||||
|
|
|
@ -34,11 +34,7 @@
|
|||
* Non-CPU Masters address decoding --
|
||||
* Unlike the CPU, we setup the access from Orion's master interfaces to DDR
|
||||
* banks only (the typical use case).
|
||||
* Setup access for each master to DDR is issued by common.c.
|
||||
*
|
||||
* Note: although orion_setbits() and orion_clrbits() are not atomic
|
||||
* no locking is necessary here since code in this file is only called
|
||||
* at boot time when there is no concurrency issues.
|
||||
* Setup access for each master to DDR is issued by platform device setup.
|
||||
*/
|
||||
|
||||
/*
|
||||
|
@ -48,10 +44,6 @@
|
|||
#define TARGET_DEV_BUS 1
|
||||
#define TARGET_PCI 3
|
||||
#define TARGET_PCIE 4
|
||||
#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
|
||||
((n) == 1) ? 0xd : \
|
||||
((n) == 2) ? 0xb : \
|
||||
((n) == 3) ? 0x7 : 0xf)
|
||||
#define ATTR_PCIE_MEM 0x59
|
||||
#define ATTR_PCIE_IO 0x51
|
||||
#define ATTR_PCIE_WA 0x79
|
||||
|
@ -61,17 +53,12 @@
|
|||
#define ATTR_DEV_CS1 0x1d
|
||||
#define ATTR_DEV_CS2 0x1b
|
||||
#define ATTR_DEV_BOOT 0xf
|
||||
#define WIN_EN 1
|
||||
|
||||
/*
|
||||
* Helpers to get DDR bank info
|
||||
*/
|
||||
#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8))
|
||||
#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8))
|
||||
#define DDR_MAX_CS 4
|
||||
#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
|
||||
#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
|
||||
#define DDR_BANK_EN 1
|
||||
#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
|
||||
#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
|
||||
|
||||
/*
|
||||
* CPU Address Decode Windows registers
|
||||
|
@ -81,17 +68,6 @@
|
|||
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
|
||||
#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
|
||||
|
||||
/*
|
||||
* Gigabit Ethernet Address Decode Windows registers
|
||||
*/
|
||||
#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8))
|
||||
#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8))
|
||||
#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4))
|
||||
#define ETH_WIN_EN ORION5X_ETH_REG(0x290)
|
||||
#define ETH_WIN_PROT ORION5X_ETH_REG(0x294)
|
||||
#define ETH_MAX_WIN 6
|
||||
#define ETH_MAX_REMAP_WIN 4
|
||||
|
||||
|
||||
struct mbus_dram_target_info orion5x_mbus_dram_info;
|
||||
|
||||
|
@ -202,39 +178,3 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
|
|||
{
|
||||
setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
|
||||
}
|
||||
|
||||
void __init orion5x_setup_eth_wins(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
/*
|
||||
* First, disable and clear windows
|
||||
*/
|
||||
for (i = 0; i < ETH_MAX_WIN; i++) {
|
||||
orion5x_write(ETH_WIN_BASE(i), 0);
|
||||
orion5x_write(ETH_WIN_SIZE(i), 0);
|
||||
orion5x_setbits(ETH_WIN_EN, 1 << i);
|
||||
orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
|
||||
if (i < ETH_MAX_REMAP_WIN)
|
||||
orion5x_write(ETH_WIN_REMAP(i), 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup windows for DDR banks.
|
||||
*/
|
||||
for (i = 0; i < DDR_MAX_CS; i++) {
|
||||
u32 base, size;
|
||||
size = orion5x_read(DDR_SIZE_CS(i));
|
||||
base = orion5x_read(DDR_BASE_CS(i));
|
||||
if (size & DDR_BANK_EN) {
|
||||
base = DDR_REG_TO_BASE(base);
|
||||
size = DDR_REG_TO_SIZE(size);
|
||||
orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
|
||||
orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
|
||||
(ATTR_DDR_CS(i) << 8) |
|
||||
TARGET_DDR);
|
||||
orion5x_clrbits(ETH_WIN_EN, 1 << i);
|
||||
orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
@ -190,6 +190,11 @@ static struct platform_device orion5x_ehci1 = {
|
|||
* (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
|
||||
****************************************************************************/
|
||||
|
||||
struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
|
||||
.dram = &orion5x_mbus_dram_info,
|
||||
.t_clk = ORION5X_TCLK,
|
||||
};
|
||||
|
||||
static struct resource orion5x_eth_shared_resources[] = {
|
||||
{
|
||||
.start = ORION5X_ETH_PHYS_BASE + 0x2000,
|
||||
|
@ -201,6 +206,9 @@ static struct resource orion5x_eth_shared_resources[] = {
|
|||
static struct platform_device orion5x_eth_shared = {
|
||||
.name = MV643XX_ETH_SHARED_NAME,
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &orion5x_eth_shared_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = orion5x_eth_shared_resources,
|
||||
};
|
||||
|
@ -362,7 +370,6 @@ void __init orion5x_init(void)
|
|||
* Setup Orion address map
|
||||
*/
|
||||
orion5x_setup_cpu_mbus_bridge();
|
||||
orion5x_setup_eth_wins();
|
||||
|
||||
/*
|
||||
* Register devices.
|
||||
|
|
|
@ -22,7 +22,6 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
|
|||
void orion5x_setup_dev1_win(u32 base, u32 size);
|
||||
void orion5x_setup_dev2_win(u32 base, u32 size);
|
||||
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
|
||||
void orion5x_setup_eth_wins(void);
|
||||
|
||||
/*
|
||||
* Shared code used internally by other Orion core functions.
|
||||
|
|
|
@ -5,6 +5,13 @@
|
|||
# Common support (must be linked before board specific support)
|
||||
obj-y += clock.o devices.o generic.o irq.o dma.o \
|
||||
time.o gpio.o
|
||||
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
|
||||
obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
|
||||
|
||||
# Generic drivers that other drivers may depend upon
|
||||
obj-$(CONFIG_PXA_SSP) += ssp.o
|
||||
|
||||
# SoC-specific code
|
||||
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o
|
||||
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa27x.o
|
||||
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
|
||||
|
@ -48,11 +55,6 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
|
|||
|
||||
obj-$(CONFIG_LEDS) += $(led-y)
|
||||
|
||||
# Misc features
|
||||
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
|
||||
obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
|
||||
obj-$(CONFIG_PXA_SSP) += ssp.o
|
||||
|
||||
ifeq ($(CONFIG_PCI),y)
|
||||
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
|
||||
endif
|
||||
|
|
|
@ -493,8 +493,6 @@ static struct platform_device *devices[] __initdata = {
|
|||
|
||||
static void corgi_poweroff(void)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
if (!machine_is_corgi())
|
||||
/* Green LED off tells the bootloader to halt */
|
||||
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
|
||||
|
@ -503,8 +501,6 @@ static void corgi_poweroff(void)
|
|||
|
||||
static void corgi_restart(char mode)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
if (!machine_is_corgi())
|
||||
/* Green LED on tells the bootloader to reboot */
|
||||
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
|
||||
|
|
|
@ -49,125 +49,216 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
|
|||
#define freq_debug 0
|
||||
#endif
|
||||
|
||||
static unsigned int pxa27x_maxfreq;
|
||||
module_param(pxa27x_maxfreq, uint, 0);
|
||||
MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
|
||||
"(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
|
||||
|
||||
typedef struct {
|
||||
unsigned int khz;
|
||||
unsigned int membus;
|
||||
unsigned int cccr;
|
||||
unsigned int div2;
|
||||
unsigned int cclkcfg;
|
||||
} pxa_freqs_t;
|
||||
|
||||
/* Define the refresh period in mSec for the SDRAM and the number of rows */
|
||||
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
|
||||
#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
|
||||
#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
|
||||
|
||||
#define CCLKCFG_TURBO 0x1
|
||||
#define CCLKCFG_FCS 0x2
|
||||
#define PXA25x_MIN_FREQ 99500
|
||||
#define PXA25x_MAX_FREQ 398100
|
||||
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
|
||||
#define MDREFR_DRI_MASK 0xFFF
|
||||
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
|
||||
#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
|
||||
|
||||
#define CCLKCFG_TURBO 0x1
|
||||
#define CCLKCFG_FCS 0x2
|
||||
#define CCLKCFG_HALFTURBO 0x4
|
||||
#define CCLKCFG_FASTBUS 0x8
|
||||
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
|
||||
#define MDREFR_DRI_MASK 0xFFF
|
||||
|
||||
/*
|
||||
* PXA255 definitions
|
||||
*/
|
||||
/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
|
||||
#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
|
||||
|
||||
static pxa_freqs_t pxa255_run_freqs[] =
|
||||
{
|
||||
/* CPU MEMBUS CCCR DIV2*/
|
||||
{ 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
|
||||
{132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
|
||||
{199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
|
||||
{265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
|
||||
{331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
|
||||
{398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
|
||||
{0,}
|
||||
/* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
|
||||
{ 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
|
||||
{132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */
|
||||
{199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */
|
||||
{265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */
|
||||
{331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */
|
||||
{398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */
|
||||
};
|
||||
#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
|
||||
|
||||
static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
|
||||
|
||||
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
|
||||
static pxa_freqs_t pxa255_turbo_freqs[] =
|
||||
{
|
||||
/* CPU MEMBUS CCCR DIV2*/
|
||||
{ 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
|
||||
{199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
|
||||
{298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
|
||||
{298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
|
||||
{398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
|
||||
{0,}
|
||||
/* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
|
||||
{ 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
|
||||
{199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */
|
||||
{298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */
|
||||
{298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */
|
||||
{398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */
|
||||
};
|
||||
#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
|
||||
|
||||
static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
|
||||
#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
|
||||
#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
|
||||
|
||||
static struct cpufreq_frequency_table
|
||||
pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
|
||||
static struct cpufreq_frequency_table
|
||||
pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
|
||||
|
||||
/*
|
||||
* PXA270 definitions
|
||||
*
|
||||
* For the PXA27x:
|
||||
* Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
|
||||
*
|
||||
* A = 0 => memory controller clock from table 3-7,
|
||||
* A = 1 => memory controller clock = system bus clock
|
||||
* Run mode frequency = 13 MHz * L
|
||||
* Turbo mode frequency = 13 MHz * L * N
|
||||
* System bus frequency = 13 MHz * L / (B + 1)
|
||||
*
|
||||
* In CCCR:
|
||||
* A = 1
|
||||
* L = 16 oscillator to run mode ratio
|
||||
* 2N = 6 2 * (turbo mode to run mode ratio)
|
||||
*
|
||||
* In CCLKCFG:
|
||||
* B = 1 Fast bus mode
|
||||
* HT = 0 Half-Turbo mode
|
||||
* T = 1 Turbo mode
|
||||
*
|
||||
* For now, just support some of the combinations in table 3-7 of
|
||||
* PXA27x Processor Family Developer's Manual to simplify frequency
|
||||
* change sequences.
|
||||
*/
|
||||
#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
|
||||
#define CCLKCFG2(B, HT, T) \
|
||||
(CCLKCFG_FCS | \
|
||||
((B) ? CCLKCFG_FASTBUS : 0) | \
|
||||
((HT) ? CCLKCFG_HALFTURBO : 0) | \
|
||||
((T) ? CCLKCFG_TURBO : 0))
|
||||
|
||||
static pxa_freqs_t pxa27x_freqs[] = {
|
||||
{104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)},
|
||||
{156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)},
|
||||
{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
|
||||
{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
|
||||
{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
|
||||
{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
|
||||
{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
|
||||
};
|
||||
|
||||
#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
|
||||
static struct cpufreq_frequency_table
|
||||
pxa27x_freq_table[NUM_PXA27x_FREQS+1];
|
||||
|
||||
extern unsigned get_clk_frequency_khz(int info);
|
||||
|
||||
static void find_freq_tables(struct cpufreq_policy *policy,
|
||||
struct cpufreq_frequency_table **freq_table,
|
||||
pxa_freqs_t **pxa_freqs)
|
||||
{
|
||||
if (cpu_is_pxa25x()) {
|
||||
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
|
||||
*pxa_freqs = pxa255_run_freqs;
|
||||
*freq_table = pxa255_run_freq_table;
|
||||
} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
|
||||
*pxa_freqs = pxa255_turbo_freqs;
|
||||
*freq_table = pxa255_turbo_freq_table;
|
||||
} else {
|
||||
printk("CPU PXA: Unknown policy found. "
|
||||
"Using CPUFREQ_POLICY_PERFORMANCE\n");
|
||||
*pxa_freqs = pxa255_run_freqs;
|
||||
*freq_table = pxa255_run_freq_table;
|
||||
}
|
||||
}
|
||||
if (cpu_is_pxa27x()) {
|
||||
*pxa_freqs = pxa27x_freqs;
|
||||
*freq_table = pxa27x_freq_table;
|
||||
}
|
||||
}
|
||||
|
||||
static void pxa27x_guess_max_freq(void)
|
||||
{
|
||||
if (!pxa27x_maxfreq) {
|
||||
pxa27x_maxfreq = 416000;
|
||||
printk(KERN_INFO "PXA CPU 27x max frequency not defined "
|
||||
"(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
|
||||
pxa27x_maxfreq);
|
||||
} else {
|
||||
pxa27x_maxfreq *= 1000;
|
||||
}
|
||||
}
|
||||
|
||||
static u32 mdrefr_dri(unsigned int freq)
|
||||
{
|
||||
u32 dri = 0;
|
||||
|
||||
if (cpu_is_pxa25x())
|
||||
dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
|
||||
if (cpu_is_pxa27x())
|
||||
dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
|
||||
return dri;
|
||||
}
|
||||
|
||||
/* find a valid frequency point */
|
||||
static int pxa_verify_policy(struct cpufreq_policy *policy)
|
||||
{
|
||||
struct cpufreq_frequency_table *pxa_freqs_table;
|
||||
pxa_freqs_t *pxa_freqs;
|
||||
int ret;
|
||||
|
||||
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
|
||||
pxa_freqs_table = pxa255_run_freq_table;
|
||||
} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
|
||||
pxa_freqs_table = pxa255_turbo_freq_table;
|
||||
} else {
|
||||
printk("CPU PXA: Unknown policy found. "
|
||||
"Using CPUFREQ_POLICY_PERFORMANCE\n");
|
||||
pxa_freqs_table = pxa255_run_freq_table;
|
||||
}
|
||||
|
||||
find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
|
||||
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
|
||||
|
||||
if (freq_debug)
|
||||
pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
|
||||
policy->min, policy->max);
|
||||
policy->min, policy->max);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static unsigned int pxa_cpufreq_get(unsigned int cpu)
|
||||
{
|
||||
return get_clk_frequency_khz(0);
|
||||
}
|
||||
|
||||
static int pxa_set_target(struct cpufreq_policy *policy,
|
||||
unsigned int target_freq,
|
||||
unsigned int relation)
|
||||
unsigned int target_freq,
|
||||
unsigned int relation)
|
||||
{
|
||||
struct cpufreq_frequency_table *pxa_freqs_table;
|
||||
pxa_freqs_t *pxa_freq_settings;
|
||||
struct cpufreq_freqs freqs;
|
||||
unsigned int idx;
|
||||
unsigned long flags;
|
||||
unsigned int unused, preset_mdrefr, postset_mdrefr;
|
||||
void *ramstart = phys_to_virt(0xa0000000);
|
||||
unsigned int new_freq_cpu, new_freq_mem;
|
||||
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
|
||||
|
||||
/* Get the current policy */
|
||||
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
|
||||
pxa_freq_settings = pxa255_run_freqs;
|
||||
pxa_freqs_table = pxa255_run_freq_table;
|
||||
} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
|
||||
pxa_freq_settings = pxa255_turbo_freqs;
|
||||
pxa_freqs_table = pxa255_turbo_freq_table;
|
||||
} else {
|
||||
printk("CPU PXA: Unknown policy found. "
|
||||
"Using CPUFREQ_POLICY_PERFORMANCE\n");
|
||||
pxa_freq_settings = pxa255_run_freqs;
|
||||
pxa_freqs_table = pxa255_run_freq_table;
|
||||
}
|
||||
find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
|
||||
|
||||
/* Lookup the next frequency */
|
||||
if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
|
||||
target_freq, relation, &idx)) {
|
||||
target_freq, relation, &idx)) {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
new_freq_cpu = pxa_freq_settings[idx].khz;
|
||||
new_freq_mem = pxa_freq_settings[idx].membus;
|
||||
freqs.old = policy->cur;
|
||||
freqs.new = pxa_freq_settings[idx].khz;
|
||||
freqs.new = new_freq_cpu;
|
||||
freqs.cpu = policy->cpu;
|
||||
|
||||
if (freq_debug)
|
||||
pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
|
||||
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
|
||||
(pxa_freq_settings[idx].membus / 2000) :
|
||||
(pxa_freq_settings[idx].membus / 1000));
|
||||
pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
|
||||
"(SDRAM %d Mhz)\n",
|
||||
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
|
||||
(new_freq_mem / 2000) : (new_freq_mem / 1000));
|
||||
|
||||
/*
|
||||
* Tell everyone what we're about to do...
|
||||
|
@ -177,16 +268,16 @@ static int pxa_set_target(struct cpufreq_policy *policy,
|
|||
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
||||
|
||||
/* Calculate the next MDREFR. If we're slowing down the SDRAM clock
|
||||
* we need to preset the smaller DRI before the change. If we're speeding
|
||||
* up we need to set the larger DRI value after the change.
|
||||
* we need to preset the smaller DRI before the change. If we're
|
||||
* speeding up we need to set the larger DRI value after the change.
|
||||
*/
|
||||
preset_mdrefr = postset_mdrefr = MDREFR;
|
||||
if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
|
||||
preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
|
||||
MDREFR_DRI(pxa_freq_settings[idx].membus);
|
||||
if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
|
||||
preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
|
||||
preset_mdrefr |= mdrefr_dri(new_freq_mem);
|
||||
}
|
||||
postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
|
||||
MDREFR_DRI(pxa_freq_settings[idx].membus);
|
||||
postset_mdrefr =
|
||||
(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
|
||||
|
||||
/* If we're dividing the memory clock by two for the SDRAM clock, this
|
||||
* must be set prior to the change. Clearing the divide must be done
|
||||
|
@ -201,26 +292,27 @@ static int pxa_set_target(struct cpufreq_policy *policy,
|
|||
|
||||
local_irq_save(flags);
|
||||
|
||||
/* Set new the CCCR */
|
||||
/* Set new the CCCR and prepare CCLKCFG */
|
||||
CCCR = pxa_freq_settings[idx].cccr;
|
||||
cclkcfg = pxa_freq_settings[idx].cclkcfg;
|
||||
|
||||
asm volatile(" \n\
|
||||
ldr r4, [%1] /* load MDREFR */ \n\
|
||||
b 2f \n\
|
||||
.align 5 \n\
|
||||
.align 5 \n\
|
||||
1: \n\
|
||||
str %4, [%1] /* preset the MDREFR */ \n\
|
||||
str %3, [%1] /* preset the MDREFR */ \n\
|
||||
mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
|
||||
str %5, [%1] /* postset the MDREFR */ \n\
|
||||
str %4, [%1] /* postset the MDREFR */ \n\
|
||||
\n\
|
||||
b 3f \n\
|
||||
2: b 1b \n\
|
||||
3: nop \n\
|
||||
"
|
||||
: "=&r" (unused)
|
||||
: "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
|
||||
"r" (preset_mdrefr), "r" (postset_mdrefr)
|
||||
: "r4", "r5");
|
||||
: "=&r" (unused)
|
||||
: "r" (&MDREFR), "r" (cclkcfg),
|
||||
"r" (preset_mdrefr), "r" (postset_mdrefr)
|
||||
: "r4", "r5");
|
||||
local_irq_restore(flags);
|
||||
|
||||
/*
|
||||
|
@ -233,38 +325,57 @@ static int pxa_set_target(struct cpufreq_policy *policy,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int pxa_cpufreq_get(unsigned int cpu)
|
||||
{
|
||||
return get_clk_frequency_khz(0);
|
||||
}
|
||||
|
||||
static int pxa_cpufreq_init(struct cpufreq_policy *policy)
|
||||
static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
|
||||
{
|
||||
int i;
|
||||
unsigned int freq;
|
||||
|
||||
/* try to guess pxa27x cpu */
|
||||
if (cpu_is_pxa27x())
|
||||
pxa27x_guess_max_freq();
|
||||
|
||||
/* set default policy and cpuinfo */
|
||||
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
||||
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
|
||||
policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
|
||||
policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
|
||||
if (cpu_is_pxa25x())
|
||||
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
|
||||
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
|
||||
policy->cur = get_clk_frequency_khz(0); /* current freq */
|
||||
policy->cur = get_clk_frequency_khz(0); /* current freq */
|
||||
policy->min = policy->max = policy->cur;
|
||||
|
||||
/* Generate the run cpufreq_frequency_table struct */
|
||||
for (i = 0; i < NUM_RUN_FREQS; i++) {
|
||||
/* Generate pxa25x the run cpufreq_frequency_table struct */
|
||||
for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
|
||||
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
|
||||
pxa255_run_freq_table[i].index = i;
|
||||
}
|
||||
|
||||
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
|
||||
/* Generate the turbo cpufreq_frequency_table struct */
|
||||
for (i = 0; i < NUM_TURBO_FREQS; i++) {
|
||||
pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
|
||||
|
||||
/* Generate pxa25x the turbo cpufreq_frequency_table struct */
|
||||
for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
|
||||
pxa255_turbo_freq_table[i].frequency =
|
||||
pxa255_turbo_freqs[i].khz;
|
||||
pxa255_turbo_freq_table[i].index = i;
|
||||
}
|
||||
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
|
||||
|
||||
/* Generate the pxa27x cpufreq_frequency_table struct */
|
||||
for (i = 0; i < NUM_PXA27x_FREQS; i++) {
|
||||
freq = pxa27x_freqs[i].khz;
|
||||
if (freq > pxa27x_maxfreq)
|
||||
break;
|
||||
pxa27x_freq_table[i].frequency = freq;
|
||||
pxa27x_freq_table[i].index = i;
|
||||
}
|
||||
pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
|
||||
|
||||
/*
|
||||
* Set the policy's minimum and maximum frequencies from the tables
|
||||
* just constructed. This sets cpuinfo.mxx_freq, min and max.
|
||||
*/
|
||||
if (cpu_is_pxa25x())
|
||||
cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
|
||||
else if (cpu_is_pxa27x())
|
||||
cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
|
||||
|
||||
printk(KERN_INFO "PXA CPU frequency change support initialized\n");
|
||||
|
||||
return 0;
|
||||
|
@ -275,26 +386,25 @@ static struct cpufreq_driver pxa_cpufreq_driver = {
|
|||
.target = pxa_set_target,
|
||||
.init = pxa_cpufreq_init,
|
||||
.get = pxa_cpufreq_get,
|
||||
.name = "PXA25x",
|
||||
.name = "PXA2xx",
|
||||
};
|
||||
|
||||
static int __init pxa_cpu_init(void)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
if (cpu_is_pxa25x())
|
||||
if (cpu_is_pxa25x() || cpu_is_pxa27x())
|
||||
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __exit pxa_cpu_exit(void)
|
||||
{
|
||||
if (cpu_is_pxa25x())
|
||||
cpufreq_unregister_driver(&pxa_cpufreq_driver);
|
||||
cpufreq_unregister_driver(&pxa_cpufreq_driver);
|
||||
}
|
||||
|
||||
|
||||
MODULE_AUTHOR ("Intrinsyc Software Inc.");
|
||||
MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
|
||||
MODULE_AUTHOR("Intrinsyc Software Inc.");
|
||||
MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
|
||||
MODULE_LICENSE("GPL");
|
||||
module_init(pxa_cpu_init);
|
||||
module_exit(pxa_cpu_exit);
|
||||
|
|
|
@ -396,7 +396,7 @@ static struct pxafb_mach_info sharp_lm8v31 = {
|
|||
.cmap_inverse = 0,
|
||||
.cmap_static = 0,
|
||||
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
|
||||
LCD_AC_BIAS_FREQ(255);
|
||||
LCD_AC_BIAS_FREQ(255),
|
||||
};
|
||||
|
||||
#define MMC_POLL_RATE msecs_to_jiffies(1000)
|
||||
|
|
|
@ -42,20 +42,17 @@ int pxa_pm_enter(suspend_state_t state)
|
|||
if (state != PM_SUSPEND_STANDBY) {
|
||||
pxa_cpu_pm_fns->save(sleep_save);
|
||||
/* before sleeping, calculate and save a checksum */
|
||||
for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
|
||||
for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
|
||||
sleep_save_checksum += sleep_save[i];
|
||||
}
|
||||
|
||||
/* Clear reset status */
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
/* *** go zzz *** */
|
||||
pxa_cpu_pm_fns->enter(state);
|
||||
cpu_init();
|
||||
|
||||
if (state != PM_SUSPEND_STANDBY) {
|
||||
/* after sleeping, validate the checksum */
|
||||
for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
|
||||
for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
|
||||
checksum += sleep_save[i];
|
||||
|
||||
/* if invalid, display message and wait for a hardware reset */
|
||||
|
@ -101,7 +98,8 @@ static int __init pxa_pm_init(void)
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
|
||||
sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
|
||||
GFP_KERNEL);
|
||||
if (!sleep_save) {
|
||||
printk(KERN_ERR "failed to alloc memory for pm save\n");
|
||||
return -ENOMEM;
|
||||
|
|
|
@ -326,13 +326,11 @@ static struct platform_device *devices[] __initdata = {
|
|||
|
||||
static void poodle_poweroff(void)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
arm_machine_restart('h');
|
||||
}
|
||||
|
||||
static void poodle_restart(char mode)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
arm_machine_restart('h');
|
||||
}
|
||||
|
||||
|
|
|
@ -150,9 +150,7 @@ static struct clk pxa25x_clks[] = {
|
|||
* More ones like CP and general purpose register values are preserved
|
||||
* with the stack pointer in sleep.S.
|
||||
*/
|
||||
enum { SLEEP_SAVE_START = 0,
|
||||
|
||||
SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
|
||||
enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
|
||||
|
||||
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
|
||||
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
|
||||
|
@ -162,7 +160,7 @@ enum { SLEEP_SAVE_START = 0,
|
|||
|
||||
SLEEP_SAVE_CKEN,
|
||||
|
||||
SLEEP_SAVE_SIZE
|
||||
SLEEP_SAVE_COUNT
|
||||
};
|
||||
|
||||
|
||||
|
@ -200,6 +198,9 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
|
|||
|
||||
static void pxa25x_cpu_pm_enter(suspend_state_t state)
|
||||
{
|
||||
/* Clear reset status */
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
switch (state) {
|
||||
case PM_SUSPEND_MEM:
|
||||
/* set resume return address */
|
||||
|
@ -210,7 +211,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
|
|||
}
|
||||
|
||||
static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
|
||||
.save_size = SLEEP_SAVE_SIZE,
|
||||
.save_count = SLEEP_SAVE_COUNT,
|
||||
.valid = suspend_valid_only_mem,
|
||||
.save = pxa25x_cpu_pm_save,
|
||||
.restore = pxa25x_cpu_pm_restore,
|
||||
|
|
|
@ -181,9 +181,7 @@ static struct clk pxa27x_clks[] = {
|
|||
* More ones like CP and general purpose register values are preserved
|
||||
* with the stack pointer in sleep.S.
|
||||
*/
|
||||
enum { SLEEP_SAVE_START = 0,
|
||||
|
||||
SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
|
||||
enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
|
||||
|
||||
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
|
||||
SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
|
||||
|
@ -198,7 +196,7 @@ enum { SLEEP_SAVE_START = 0,
|
|||
SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
|
||||
SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
|
||||
|
||||
SLEEP_SAVE_SIZE
|
||||
SLEEP_SAVE_COUNT
|
||||
};
|
||||
|
||||
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
|
||||
|
@ -251,6 +249,9 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
|
|||
/* Clear edge-detect status register. */
|
||||
PEDR = 0xDF12FE1B;
|
||||
|
||||
/* Clear reset status */
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
switch (state) {
|
||||
case PM_SUSPEND_STANDBY:
|
||||
pxa_cpu_standby();
|
||||
|
@ -269,7 +270,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
|
|||
}
|
||||
|
||||
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
|
||||
.save_size = SLEEP_SAVE_SIZE,
|
||||
.save_count = SLEEP_SAVE_COUNT,
|
||||
.save = pxa27x_cpu_pm_save,
|
||||
.restore = pxa27x_cpu_pm_restore,
|
||||
.valid = pxa27x_cpu_pm_valid,
|
||||
|
|
|
@ -256,12 +256,11 @@ static unsigned long wakeup_src;
|
|||
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
|
||||
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
|
||||
|
||||
enum { SLEEP_SAVE_START = 0,
|
||||
SLEEP_SAVE_CKENA,
|
||||
enum { SLEEP_SAVE_CKENA,
|
||||
SLEEP_SAVE_CKENB,
|
||||
SLEEP_SAVE_ACCR,
|
||||
|
||||
SLEEP_SAVE_SIZE,
|
||||
SLEEP_SAVE_COUNT,
|
||||
};
|
||||
|
||||
static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
|
||||
|
@ -376,7 +375,7 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
|
|||
}
|
||||
|
||||
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
|
||||
.save_size = SLEEP_SAVE_SIZE,
|
||||
.save_count = SLEEP_SAVE_COUNT,
|
||||
.save = pxa3xx_cpu_pm_save,
|
||||
.restore = pxa3xx_cpu_pm_restore,
|
||||
.valid = pxa3xx_cpu_pm_valid,
|
||||
|
|
|
@ -529,8 +529,6 @@ static struct platform_device *devices[] __initdata = {
|
|||
|
||||
static void spitz_poweroff(void)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
|
||||
GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
|
||||
|
||||
|
|
|
@ -119,9 +119,6 @@ static void spitz_presuspend(void)
|
|||
/* nRESET_OUT Disable */
|
||||
PSLR |= PSLR_SL_ROD;
|
||||
|
||||
/* Clear reset status */
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
|
||||
PCFR = PCFR_GPR_EN | PCFR_OPDE;
|
||||
}
|
||||
|
|
|
@ -467,8 +467,6 @@ static struct platform_device *devices[] __initdata = {
|
|||
|
||||
static void tosa_poweroff(void)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
|
||||
GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
|
||||
|
||||
|
|
|
@ -43,20 +43,18 @@ extern void sa1100_cpu_resume(void);
|
|||
* More ones like CP and general purpose register values are preserved
|
||||
* on the stack and then the stack pointer is stored last in sleep.S.
|
||||
*/
|
||||
enum { SLEEP_SAVE_SP = 0,
|
||||
|
||||
SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
|
||||
enum { SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
|
||||
SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
|
||||
|
||||
SLEEP_SAVE_Ser1SDCR0,
|
||||
|
||||
SLEEP_SAVE_SIZE
|
||||
SLEEP_SAVE_COUNT
|
||||
};
|
||||
|
||||
|
||||
static int sa11x0_pm_enter(suspend_state_t state)
|
||||
{
|
||||
unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
|
||||
unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
|
||||
|
||||
gpio = GPLR;
|
||||
|
||||
|
|
|
@ -411,7 +411,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
|
|||
|
||||
clk->parent = parent;
|
||||
|
||||
if (clk == &s3c24xx_dclk0)
|
||||
if (clk == &s3c24xx_clkout0)
|
||||
mask = S3C2410_MISCCR_CLK0_MASK;
|
||||
else {
|
||||
source <<= 4;
|
||||
|
@ -437,7 +437,7 @@ struct clk s3c24xx_dclk0 = {
|
|||
struct clk s3c24xx_dclk1 = {
|
||||
.name = "dclk1",
|
||||
.id = -1,
|
||||
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
|
||||
.ctrlbit = S3C2410_DCLKCON_DCLK1EN,
|
||||
.enable = s3c24xx_dclk_enable,
|
||||
.set_parent = s3c24xx_dclk_setparent,
|
||||
.set_rate = s3c24xx_set_dclk_rate,
|
||||
|
|
|
@ -425,7 +425,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|||
host->cclk = host->mclk;
|
||||
} else {
|
||||
clk = host->mclk / (2 * ios->clock) - 1;
|
||||
if (clk > 256)
|
||||
if (clk >= 256)
|
||||
clk = 255;
|
||||
host->cclk = host->mclk / (2 * (clk + 1));
|
||||
}
|
||||
|
@ -512,6 +512,18 @@ static int mmci_probe(struct amba_device *dev, void *id)
|
|||
|
||||
host->plat = plat;
|
||||
host->mclk = clk_get_rate(host->clk);
|
||||
/*
|
||||
* According to the spec, mclk is max 100 MHz,
|
||||
* so we try to adjust the clock down to this,
|
||||
* (if possible).
|
||||
*/
|
||||
if (host->mclk > 100000000) {
|
||||
ret = clk_set_rate(host->clk, 100000000);
|
||||
if (ret < 0)
|
||||
goto clk_disable;
|
||||
host->mclk = clk_get_rate(host->clk);
|
||||
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
|
||||
}
|
||||
host->mmc = mmc;
|
||||
host->base = ioremap(dev->res.start, SZ_4K);
|
||||
if (!host->base) {
|
||||
|
|
|
@ -1301,8 +1301,8 @@ static void pxafb_decode_mode_info(struct pxafb_info *fbi,
|
|||
}
|
||||
}
|
||||
|
||||
static int pxafb_decode_mach_info(struct pxafb_info *fbi,
|
||||
struct pxafb_mach_info *inf)
|
||||
static void pxafb_decode_mach_info(struct pxafb_info *fbi,
|
||||
struct pxafb_mach_info *inf)
|
||||
{
|
||||
unsigned int lcd_conn = inf->lcd_conn;
|
||||
|
||||
|
@ -1333,7 +1333,7 @@ static int pxafb_decode_mach_info(struct pxafb_info *fbi,
|
|||
fbi->lccr0 = inf->lccr0;
|
||||
fbi->lccr3 = inf->lccr3;
|
||||
fbi->lccr4 = inf->lccr4;
|
||||
return -EINVAL;
|
||||
goto decode_mode;
|
||||
}
|
||||
|
||||
if (lcd_conn == LCD_MONO_STN_8BPP)
|
||||
|
@ -1343,8 +1343,8 @@ static int pxafb_decode_mach_info(struct pxafb_info *fbi,
|
|||
fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
|
||||
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
|
||||
|
||||
decode_mode:
|
||||
pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
|
||||
|
|
|
@ -10,7 +10,7 @@
|
|||
#include <linux/suspend.h>
|
||||
|
||||
struct pxa_cpu_pm_fns {
|
||||
int save_size;
|
||||
int save_count;
|
||||
void (*save)(unsigned long *);
|
||||
void (*restore)(unsigned long *);
|
||||
int (*valid)(suspend_state_t state);
|
||||
|
|
|
@ -22,7 +22,8 @@ static inline void arch_idle(void)
|
|||
|
||||
static inline void arch_reset(char mode)
|
||||
{
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
if (cpu_is_pxa2xx())
|
||||
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
|
||||
|
||||
if (mode == 's') {
|
||||
/* Jump into ROM at address 0 */
|
||||
|
|
Loading…
Reference in a new issue