Merge 3.11-rc6 into char-misc-next

We want these fixes in this tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.gitignore

@@ -29,6 +29,7 @@ modules.builtin
 *.bz2
 *.lzma
 *.xz
+*.lz4
 *.lzo
 *.patch
 *.gcno

Documentation/DocBook/device-drivers.tmpl

@@ -84,7 +84,7 @@ X!Iinclude/linux/kobject.h
 
      <sect1><title>Kernel utility functions</title>
 !Iinclude/linux/kernel.h
-!Ekernel/printk.c
+!Ekernel/printk/printk.c
 !Ekernel/panic.c
 !Ekernel/sys.c
 !Ekernel/rcupdate.c

Documentation/DocBook/media_api.tmpl

@@ -1,6 +1,6 @@
 <?xml version="1.0"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
+	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
 <!ENTITY % media-entities SYSTEM "./media-entities.tmpl"> %media-entities;
 <!ENTITY media-indices SYSTEM "./media-indices.tmpl">
 

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -4,7 +4,7 @@
 Required properties :
 
  - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c"
+ - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :

Documentation/devicetree/bindings/regulator/palmas-pmic.txt

@@ -31,9 +31,8 @@ Optional nodes:
 	       Optional sub-node properties:
 	       ti,warm-reset - maintain voltage during warm reset(boolean)
 	       ti,roof-floor - control voltage selection by pin(boolean)
-	       ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto,
+	       ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
 	       2 - eco, 3 - forced pwm
-	       ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
 	       ti,smps-range - OTP has the wrong range set for the hardware so override
 	       0 - low range, 1 - high range.
 
@@ -59,7 +58,6 @@ pmic {
 			ti,warm-reset;
 			ti,roof-floor;
 			ti,mode-sleep = <0>;
-			ti,tstep = <0>;
 			ti,smps-range = <1>;
 		};
 

Documentation/sysctl/net.txt

@@ -52,7 +52,7 @@ Default: 64
 
 busy_read
 ----------------
-Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL)
+Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL)
 Approximate time in us to busy loop waiting for packets on the device queue.
 This sets the default value of the SO_BUSY_POLL socket option.
 Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
@@ -63,7 +63,7 @@ Default: 0 (off)
 
 busy_poll
 ----------------
-Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL)
+Low latency busy poll timeout for poll and select. (needs CONFIG_NET_RX_BUSY_POLL)
 Approximate time in us to busy loop waiting for events.
 Recommended value depends on the number of sockets you poll on.
 For several sockets 50, for several hundreds 100.

MAINTAINERS

@@ -965,6 +965,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-keystone/
+
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1259,7 +1265,6 @@ F:	drivers/rtc/rtc-coh901331.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
 ARM/Ux500 ARM ARCHITECTURE
-M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -1406,7 +1411,7 @@ ATHEROS ATH6KL WIRELESS DRIVER
 M:	Kalle Valo <kvalo@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
+T:	git git://github.com/kvalo/ath.git
 S:	Supported
 F:	drivers/net/wireless/ath/ath6kl/
 
@@ -2871,7 +2876,7 @@ F:	drivers/media/usb/dvb-usb-v2/dvb_usb*
 F:	drivers/media/usb/dvb-usb-v2/usb_urb.c
 
 DYNAMIC DEBUG
-M:	Jason Baron <jbaron@redhat.com>
+M:	Jason Baron <jbaron@akamai.com>
 S:	Maintained
 F:	lib/dynamic_debug.c
 F:	include/linux/dynamic_debug.h
@@ -5576,9 +5581,9 @@ S:	Maintained
 F:	drivers/media/tuners/mxl5007t.*
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-M:	Andrew Gallatin <gallatin@myri.com>
+M:	Hyong-Youb Kim <hykim@myri.com>
 L:	netdev@vger.kernel.org
-W:	http://www.myri.com/scs/download-Myri10GE.html
+W:	https://www.myricom.com/support/downloads/myri10ge.html
 S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
@@ -6726,6 +6731,14 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 S:	Maintained
 F:	drivers/media/tuners/qt1010*
 
+QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
+M:	Kalle Valo <kvalo@qca.qualcomm.com>
+L:	ath10k@lists.infradead.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath10k
+T:	git git://github.com/kvalo/ath.git
+S:	Supported
+F:	drivers/net/wireless/ath/ath10k/
+
 QUALCOMM HEXAGON ARCHITECTURE
 M:	Richard Kuo <rkuo@codeaurora.org>
 L:	linux-hexagon@vger.kernel.org
@@ -7353,7 +7366,6 @@ F:	drivers/net/ethernet/sfc/
 
 SGI GRU DRIVER
 M:	Dimitri Sivanich <sivanich@sgi.com>
-M:	Robin Holt <holt@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-gru/
 
@@ -7373,7 +7385,8 @@ S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-M:	Robin Holt <holt@sgi.com>
+M:	Cliff Whickman <cpw@sgi.com>
+M:	Robin Holt <robinmholt@gmail.com>
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 
@@ -8270,7 +8283,7 @@ S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TI WILINK WIRELESS DRIVERS
-M:	Luciano Coelho <coelho@ti.com>
+M:	Luciano Coelho <luca@coelho.fi>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 W:	http://wireless.kernel.org/en/users/Drivers/wl1251
@@ -8656,6 +8669,11 @@ T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	sound/usb/midi.*
 
+USB NETWORKING DRIVERS
+L:	linux-usb@vger.kernel.org
+S:	Odd Fixes
+F:	drivers/net/usb/
+
 USB OHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -407,6 +407,12 @@ config CLONE_BACKWARDS2
 	help
 	  Architecture has the first two arguments of clone(2) swapped.
 
+config CLONE_BACKWARDS3
+	bool
+	help
+	  Architecture has tls passed as the 3rd argument of clone(2),
+	  not the 5th one.
+
 config ODD_RT_SIGACTION
 	bool
 	help

arch/arc/include/asm/entry.h

@@ -38,6 +38,7 @@
 #include <asm/ptrace.h>
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
+#include <asm/mmu.h>
 
 /* Note on the LD/ST addr modes with addr reg wback
  *

arch/arm/Kconfig

@@ -20,7 +20,6 @@ config ARM
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
-	select HAVE_AOUT
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
@@ -218,7 +217,8 @@ config VECTORS_BASE
 	default DRAM_BASE if REMAP_VECTORS_TO_RAM
 	default 0x00000000
 	help
-	  The base address of exception vectors.
+	  The base address of exception vectors.  This must be two pages
+	  in size.
 
 config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED

arch/arm/Kconfig.debug

@@ -804,9 +804,19 @@ config DEBUG_LL_INCLUDE
 
 config DEBUG_UNCOMPRESS
 	bool
-	default y if ARCH_MULTIPLATFORM && DEBUG_LL && \
+	depends on ARCH_MULTIPLATFORM
-		     !DEBUG_OMAP2PLUS_UART && \
+	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     !DEBUG_TEGRA_UART
+	help
+	  This option influences the normal decompressor output for
+	  multiplatform kernels.  Normally, multiplatform kernels disable
+	  decompressor output because it is not possible to know where to
+	  send the decompressor output.
+
+	  When this option is set, the selected DEBUG_LL output method
+	  will be re-used for normal decompressor output on multiplatform
+	  kernels.
+	  
 
 config UNCOMPRESS_INCLUDE
 	string

arch/arm/Makefile

@@ -153,6 +153,7 @@ machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
+machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
@@ -160,15 +161,16 @@ machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
 machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
+machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_KIRKWOOD)		+= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		+= ks8695
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		+= mmp
 machine-$(CONFIG_ARCH_MSM)		+= msm
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
+machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MXS)		+= mxs
-machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
@@ -176,7 +178,6 @@ machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
@@ -186,25 +187,24 @@ machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_SIRF)		+= prima2
+machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_STI)		+= sti
+machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
+machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
-machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
-machine-$(CONFIG_PLAT_SPEAR)		+= spear
-machine-$(CONFIG_ARCH_STI)		+= sti
-machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
-machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
+machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
-machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
+machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.

arch/arm/boot/dts/msm8960-cdp.dts

@@ -26,7 +26,7 @@
 		cpu-offset = <0x80000>;
 	};
 
-	msmgpio: gpio@fd510000 {
+	msmgpio: gpio@800000 {
 		compatible = "qcom,msm-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -34,7 +34,7 @@
 		interrupts = <0 32 0x4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		reg = <0xfd510000 0x4000>;
+		reg = <0x800000 0x4000>;
 	};
 
 	serial@16440000 {

arch/arm/boot/dts/omap5-uevm.dts

@@ -235,7 +235,7 @@
 };
 
 &mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&ldo9_reg>;
 	bus-width = <4>;
 };
 
@@ -282,6 +282,7 @@
 
 			regulators {
 				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
 					regulator-name = "smps123";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
 				};
 
 				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
 				};
 
 				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
 				};
 
 				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
 				};
 
 				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
 					regulator-name = "smps8";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -322,15 +327,15 @@
 				};
 
 				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
 					regulator-name = "smps9";
 					regulator-min-microvolt = <2100000>;
 					regulator-max-microvolt = <2100000>;
-					regulator-always-on;
-					regulator-boot-on;
 					ti,smps-range = <0x80>;
 				};
 
 				smps10_reg: smps10 {
+					/* VBUS_5V_OTG */
 					regulator-name = "smps10";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
@@ -339,38 +344,40 @@
 				};
 
 				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <2800000>;
+					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <2800000>;
+					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
 				};
 
 				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
 					regulator-name = "ldo2";
-					regulator-min-microvolt = <2900000>;
+					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2900000>;
+					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
+					/* Unused */
-					regulator-boot-on;
+					status = "disabled";
 				};
 
 				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
 					regulator-name = "ldo3";
-					regulator-min-microvolt = <3000000>;
+					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <3000000>;
+					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
 					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
 				};
 
 				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <2200000>;
+					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <2200000>;
+					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
 				};
 
 				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
 					regulator-name = "ldo5";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -379,38 +386,43 @@
 				};
 
 				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 					regulator-name = "ldo6";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1500000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
 				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
 					regulator-name = "ldo7";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
+					/* Only for efuse reprograming! */
-					regulator-boot-on;
+					status = "disabled";
 				};
 
 				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
 					regulator-name = "ldo8";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <1500000>;
+					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
 					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
 					regulator-name = "ldo9";
 					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
+					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
 					regulator-boot-on;
 				};
 
 				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 					regulator-name = "ldoln";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -419,12 +431,20 @@
 				};
 
 				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
 					regulator-name = "ldousb";
 					regulator-min-microvolt = <3250000>;
 					regulator-max-microvolt = <3250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/stih41x.dtsi

@@ -6,10 +6,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 		};

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -457,6 +457,7 @@
 	};
 
 	usb-phy@c5004000 {
+		status = "okay";
 		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
 			GPIO_ACTIVE_LOW>;
 	};

arch/arm/include/asm/a.out-core.h

@@ -1,45 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	struct task_struct *tsk = current;
-
-	dump->magic = CMAGIC;
-	dump->start_code = tsk->mm->start_code;
-	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
-	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
-	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	dump->u_ssize = 0;
-
-	memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
-
-	if (dump->start_stack < 0x04000000)
-		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
-	dump->regs = *regs;
-	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */

arch/arm/include/asm/cputype.h

@@ -89,13 +89,18 @@ extern unsigned int processor_id;
 		__val;							\
 	})
 
+/*
+ * The memory clobber prevents gcc 4.5 from reordering the mrc before
+ * any is_smp() tests, which can cause undefined instruction aborts on
+ * ARM1136 r0 due to the missing extended CP15 registers.
+ */
 #define read_cpuid_ext(ext_reg)						\
 	({								\
 		unsigned int __val;					\
 		asm("mrc	p15, 0, %0, c0, " ext_reg		\
 		    : "=r" (__val)					\
 		    :							\
-		    : "cc");						\
+		    : "memory");					\
 		__val;							\
 	})
 

arch/arm/include/asm/elf.h

@@ -130,4 +130,10 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
+#ifdef CONFIG_MMU
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+int arch_setup_additional_pages(struct linux_binprm *, int);
+#endif
+
 #endif

arch/arm/include/asm/mmu.h

@@ -6,8 +6,11 @@
 typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 	atomic64_t	id;
+#else
+	int		switch_pending;
 #endif
 	unsigned int	vmalloc_seq;
+	unsigned long	sigpage;
 } mm_context_t;
 
 #ifdef CONFIG_CPU_HAS_ASID

arch/arm/include/asm/mmu_context.h

@@ -56,7 +56,7 @@ static inline void check_and_switch_context(struct mm_struct *mm,
 		 * on non-ASID CPUs, the old mm will remain valid until the
 		 * finish_arch_post_lock_switch() call.
 		 */
-		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+		mm->context.switch_pending = 1;
 	else
 		cpu_switch_mm(mm->pgd, mm);
 }
@@ -65,9 +65,21 @@ static inline void check_and_switch_context(struct mm_struct *mm,
 	finish_arch_post_lock_switch
 static inline void finish_arch_post_lock_switch(void)
 {
-	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
+	struct mm_struct *mm = current->mm;
-		struct mm_struct *mm = current->mm;
+
-		cpu_switch_mm(mm->pgd, mm);
+	if (mm && mm->context.switch_pending) {
+		/*
+		 * Preemption must be disabled during cpu_switch_mm() as we
+		 * have some stateful cache flush implementations. Check
+		 * switch_pending again in case we were preempted and the
+		 * switch to this mm was already done.
+		 */
+		preempt_disable();
+		if (mm->context.switch_pending) {
+			mm->context.switch_pending = 0;
+			cpu_switch_mm(mm->pgd, mm);
+		}
+		preempt_enable_no_resched();
 	}
 }
 

arch/arm/include/asm/page.h

@@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#ifdef CONFIG_KUSER_HELPERS
 #define __HAVE_ARCH_GATE_AREA 1
+#endif
 
 #ifdef CONFIG_ARM_LPAE
 #include <asm/pgtable-3level-types.h>

arch/arm/include/asm/processor.h

@@ -54,7 +54,6 @@ struct thread_struct {
 
 #define start_thread(regs,pc,sp)					\
 ({									\
-	unsigned long *stack = (unsigned long *)sp;			\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	if (current->personality & ADDR_LIMIT_32BIT)			\
 		regs->ARM_cpsr = USR_MODE;				\
@@ -65,9 +64,6 @@ struct thread_struct {
 	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
-	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
-	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
-	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
 	nommu_start_thread(regs);					\
 })
 

arch/arm/include/asm/smp_plat.h

@@ -88,4 +88,7 @@ static inline u32 mpidr_hash_size(void)
 {
 	return 1 << mpidr_hash.bits;
 }
+
+extern int platform_can_cpu_hotplug(void);
+
 #endif

arch/arm/include/asm/spinlock.h

@@ -107,7 +107,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 		"	subs	%1, %0, %0, ror #16\n"
 		"	addeq	%0, %0, %4\n"
 		"	strexeq	%2, %0, [%3]"
-		: "=&r" (slock), "=&r" (contended), "=r" (res)
+		: "=&r" (slock), "=&r" (contended), "=&r" (res)
 		: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
 		: "cc");
 	} while (res);
@@ -168,17 +168,20 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 
 static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
-	unsigned long tmp;
+	unsigned long contended, res;
 
-	__asm__ __volatile__(
+	do {
-"	ldrex	%0, [%1]\n"
+		__asm__ __volatile__(
-"	teq	%0, #0\n"
+		"	ldrex	%0, [%2]\n"
-"	strexeq	%0, %2, [%1]"
+		"	mov	%1, #0\n"
-	: "=&r" (tmp)
+		"	teq	%0, #0\n"
-	: "r" (&rw->lock), "r" (0x80000000)
+		"	strexeq	%1, %3, [%2]"
-	: "cc");
+		: "=&r" (contended), "=&r" (res)
+		: "r" (&rw->lock), "r" (0x80000000)
+		: "cc");
+	} while (res);
 
-	if (tmp == 0) {
+	if (!contended) {
 		smp_mb();
 		return 1;
 	} else {
@@ -254,18 +257,26 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
-	unsigned long tmp, tmp2 = 1;
+	unsigned long contended, res;
 
-	__asm__ __volatile__(
+	do {
-"	ldrex	%0, [%2]\n"
+		__asm__ __volatile__(
-"	adds	%0, %0, #1\n"
+		"	ldrex	%0, [%2]\n"
-"	strexpl	%1, %0, [%2]\n"
+		"	mov	%1, #0\n"
-	: "=&r" (tmp), "+r" (tmp2)
+		"	adds	%0, %0, #1\n"
-	: "r" (&rw->lock)
+		"	strexpl	%1, %0, [%2]"
-	: "cc");
+		: "=&r" (contended), "=&r" (res)
+		: "r" (&rw->lock)
+		: "cc");
+	} while (res);
 
-	smp_mb();
+	/* If the lock is negative, then it is already held for write. */
-	return tmp2 == 0;
+	if (contended < 0x80000000) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
 }
 
 /* read_can_lock - would read_trylock() succeed? */

arch/arm/include/asm/thread_info.h

@@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
-#define TIF_SWITCH_MM		22	/* deferred switch_mm */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)

arch/arm/include/asm/tlb.h

@@ -43,6 +43,7 @@ struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
 	struct vm_area_struct	*vma;
+	unsigned long		start, end;
 	unsigned long		range_start;
 	unsigned long		range_end;
 	unsigned int		nr;
@@ -107,10 +108,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = fullmm;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->vma = NULL;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;

arch/arm/include/asm/tlbflush.h

@@ -443,7 +443,18 @@ static inline void local_flush_bp_all(void)
 		isb();
 }
 
+#include <asm/cputype.h>
 #ifdef CONFIG_ARM_ERRATA_798181
+static inline int erratum_a15_798181(void)
+{
+	unsigned int midr = read_cpuid_id();
+
+	/* Cortex-A15 r0p0..r3p2 affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+		return 0;
+	return 1;
+}
+
 static inline void dummy_flush_tlb_a15_erratum(void)
 {
 	/*
@@ -453,6 +464,11 @@ static inline void dummy_flush_tlb_a15_erratum(void)
 	dsb();
 }
 #else
+static inline int erratum_a15_798181(void)
+{
+	return 0;
+}
+
 static inline void dummy_flush_tlb_a15_erratum(void)
 {
 }

arch/arm/include/asm/virt.h

@@ -29,6 +29,7 @@
 #define BOOT_CPU_MODE_MISMATCH	PSR_N_BIT
 
 #ifndef __ASSEMBLY__
+#include <asm/cacheflush.h>
 
 #ifdef CONFIG_ARM_VIRT_EXT
 /*
@@ -41,10 +42,21 @@
  */
 extern int __boot_cpu_mode;
 
+static inline void sync_boot_mode(void)
+{
+	/*
+	 * As secondaries write to __boot_cpu_mode with caches disabled, we
+	 * must flush the corresponding cache entries to ensure the visibility
+	 * of their writes.
+	 */
+	sync_cache_r(&__boot_cpu_mode);
+}
+
 void __hyp_set_vectors(unsigned long phys_vector_base);
 unsigned long __hyp_get_vectors(void);
 #else
 #define __boot_cpu_mode	(SVC_MODE)
+#define sync_boot_mode()
 #endif
 
 #ifndef ZIMAGE

arch/arm/include/uapi/asm/Kbuild

@@ -1,7 +1,6 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
-header-y += a.out.h
 header-y += byteorder.h
 header-y += fcntl.h
 header-y += hwcap.h

arch/arm/include/uapi/asm/a.out.h

@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
-  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
-  __u32 a_text;		/* length of text, in bytes */
-  __u32 a_data;		/* length of data, in bytes */
-  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;		/* length of symbol table data in file, in bytes */
-  __u32 a_entry;	/* start address */
-  __u32 a_trsize;	/* length of relocation info for text, in bytes */
-  __u32 a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)	(0x00008000)
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT	(0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */

arch/arm/kernel/entry-armv.S

@@ -357,7 +357,8 @@ ENDPROC(__pabt_svc)
 	.endm
 
 	.macro	kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \
+    !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 #ifndef CONFIG_MMU
 #warning "NPTL on non MMU needs fixing"
 #else
@@ -742,6 +743,18 @@ ENDPROC(__switch_to)
 #endif
 	.endm
 
+	.macro	kuser_pad, sym, size
+	.if	(. - \sym) & 3
+	.rept	4 - (. - \sym) & 3
+	.byte	0
+	.endr
+	.endif
+	.rept	(\size - (. - \sym)) / 4
+	.word	0xe7fddef1
+	.endr
+	.endm
+
+#ifdef CONFIG_KUSER_HELPERS
 	.align	5
 	.globl	__kuser_helper_start
 __kuser_helper_start:
@@ -832,18 +845,13 @@ kuser_cmpxchg64_fixup:
 #error "incoherent kernel configuration"
 #endif
 
-	/* pad to next slot */
+	kuser_pad __kuser_cmpxchg64, 64
-	.rept	(16 - (. - __kuser_cmpxchg64)/4)
-	.word	0
-	.endr
-
-	.align	5
 
 __kuser_memory_barrier:				@ 0xffff0fa0
 	smp_dmb	arm
 	usr_ret	lr
 
-	.align	5
+	kuser_pad __kuser_memory_barrier, 32
 
 __kuser_cmpxchg:				@ 0xffff0fc0
 
@@ -916,13 +924,14 @@ kuser_cmpxchg32_fixup:
 
 #endif
 
-	.align	5
+	kuser_pad __kuser_cmpxchg, 32
 
 __kuser_get_tls:				@ 0xffff0fe0
 	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
 	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
-	.rep	4
+	kuser_pad __kuser_get_tls, 16
+	.rep	3
 	.word	0			@ 0xffff0ff0 software TLS value, then
 	.endr				@ pad up to __kuser_helper_version
 
@@ -932,14 +941,16 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+#endif
+
  THUMB(	.thumb	)
 
 /*
  * Vector stubs.
  *
- * This code is copied to 0xffff0200 so we can use branches in the
+ * This code is copied to 0xffff1000 so we can use branches in the
- * vectors, rather than ldr's.  Note that this code must not
+ * vectors, rather than ldr's.  Note that this code must not exceed
- * exceed 0x300 bytes.
+ * a page size.
  *
  * Common stub entry macro:
  *   Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
@@ -986,8 +997,17 @@ ENDPROC(vector_\name)
 1:
 	.endm
 
-	.globl	__stubs_start
+	.section .stubs, "ax", %progbits
 __stubs_start:
+	@ This must be the first word
+	.word	vector_swi
+
+vector_rst:
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	b	vector_und
+
 /*
  * Interrupt dispatcher
  */
@@ -1081,6 +1101,16 @@ __stubs_start:
 
 	.align	5
 
+/*=============================================================================
+ * Address exception handler
+ *-----------------------------------------------------------------------------
+ * These aren't too critical.
+ * (they're not supposed to happen, and won't happen in 32-bit data mode).
+ */
+
+vector_addrexcptn:
+	b	vector_addrexcptn
+
 /*=============================================================================
  * Undefined FIQs
  *-----------------------------------------------------------------------------
@@ -1094,45 +1124,19 @@ __stubs_start:
 vector_fiq:
 	subs	pc, lr, #4
 
-/*=============================================================================
+	.globl	vector_fiq_offset
- * Address exception handler
+	.equ	vector_fiq_offset, vector_fiq
- *-----------------------------------------------------------------------------
- * These aren't too critical.
- * (they're not supposed to happen, and won't happen in 32-bit data mode).
- */
 
-vector_addrexcptn:
+	.section .vectors, "ax", %progbits
-	b	vector_addrexcptn
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
-	.align	5
-
-.LCvswi:
-	.word	vector_swi
-
-	.globl	__stubs_end
-__stubs_end:
-
-	.equ	stubs_offset, __vectors_start + 0x200 - __stubs_start
-
-	.globl	__vectors_start
 __vectors_start:
- ARM(	swi	SYS_ERROR0	)
+	W(b)	vector_rst
- THUMB(	svc	#0		)
+	W(b)	vector_und
- THUMB(	nop			)
+	W(ldr)	pc, __vectors_start + 0x1000
-	W(b)	vector_und + stubs_offset
+	W(b)	vector_pabt
-	W(ldr)	pc, .LCvswi + stubs_offset
+	W(b)	vector_dabt
-	W(b)	vector_pabt + stubs_offset
+	W(b)	vector_addrexcptn
-	W(b)	vector_dabt + stubs_offset
+	W(b)	vector_irq
-	W(b)	vector_addrexcptn + stubs_offset
+	W(b)	vector_fiq
-	W(b)	vector_irq + stubs_offset
-	W(b)	vector_fiq + stubs_offset
-
-	.globl	__vectors_end
-__vectors_end:
 
 	.data
 

arch/arm/kernel/entry-v7m.S

@@ -49,7 +49,7 @@ __irq_entry:
 	mov	r1, sp
 	stmdb	sp!, {lr}
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	bl	nvic_do_IRQ
+	bl	nvic_handle_irq
 
 	pop	{lr}
 	@

arch/arm/kernel/fiq.c

@@ -47,6 +47,11 @@
 #include <asm/irq.h>
 #include <asm/traps.h>
 
+#define FIQ_OFFSET ({					\
+		extern void *vector_fiq_offset;		\
+		(unsigned)&vector_fiq_offset;		\
+	})
+
 static unsigned long no_fiq_insn;
 
 /* Default reacquire function
@@ -79,14 +84,13 @@ int show_fiq_list(struct seq_file *p, int prec)
 
 void set_fiq_handler(void *start, unsigned int length)
 {
-#if defined(CONFIG_CPU_USE_DOMAINS)
+	void *base = vectors_page;
-	memcpy((void *)0xffff001c, start, length);
+	unsigned offset = FIQ_OFFSET;
-#else
+
-	memcpy(vectors_page + 0x1c, start, length);
+	memcpy(base + offset, start, length);
-#endif
+	if (!cache_is_vipt_nonaliasing())
-	flush_icache_range(0xffff001c, 0xffff001c + length);
+		flush_icache_range(base + offset, offset + length);
-	if (!vectors_high())
+	flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
-		flush_icache_range(0x1c, 0x1c + length);
 }
 
 int claim_fiq(struct fiq_handler *f)
@@ -144,6 +148,7 @@ EXPORT_SYMBOL(disable_fiq);
 
 void __init init_FIQ(int start)
 {
-	no_fiq_insn = *(unsigned long *)0xffff001c;
+	unsigned offset = FIQ_OFFSET;
+	no_fiq_insn = *(unsigned long *)(0xffff0000 + offset);
 	fiq_start = start;
 }

arch/arm/kernel/head-nommu.S

@@ -87,6 +87,7 @@ ENTRY(stext)
 ENDPROC(stext)
 
 #ifdef CONFIG_SMP
+	.text
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/head.S

@@ -343,6 +343,7 @@ __turn_mmu_on_loc:
 	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
+	.text
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/hyp-stub.S

@@ -56,8 +56,8 @@ ENTRY(__boot_cpu_mode)
 	ldr	\reg3, [\reg2]
 	ldr	\reg1, [\reg2, \reg3]
 	cmp	\mode, \reg1		@ matches primary CPU boot mode?
-	orrne	r7, r7, #BOOT_CPU_MODE_MISMATCH
+	orrne	\reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
-	strne	r7, [r5, r6]		@ record what happened and give up
+	strne	\reg1, [\reg2, \reg3]	@ record what happened and give up
 	.endm
 
 #else	/* ZIMAGE */

arch/arm/kernel/machine_kexec.c

@@ -15,6 +15,7 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
+#include <asm/smp_plat.h>
 #include <asm/system_misc.h>
 
 extern const unsigned char relocate_new_kernel[];
@@ -38,6 +39,14 @@ int machine_kexec_prepare(struct kimage *image)
 	__be32 header;
 	int i, err;
 
+	/*
+	 * Validate that if the current HW supports SMP, then the SW supports
+	 * and implements CPU hotplug for the current HW. If not, we won't be
+	 * able to kexec reliably, so fail the prepare operation.
+	 */
+	if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug())
+		return -EINVAL;
+
 	/*
 	 * No segment at default ATAGs address. try to locate
 	 * a dtb using magic.
@@ -134,10 +143,13 @@ void machine_kexec(struct kimage *image)
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
-	if (num_online_cpus() > 1) {
+	/*
-		pr_err("kexec: error: multiple CPUs still online\n");
+	 * This can only happen if machine_shutdown() failed to disable some
-		return;
+	 * CPU, and that can only happen if the checks in
-	}
+	 * machine_kexec_prepare() were not correct. If this fails, we can't
+	 * reliably kexec anyway, so BUG_ON is appropriate.
+	 */
+	BUG_ON(num_online_cpus() > 1);
 
 	page_list = image->head & PAGE_MASK;
 

arch/arm/kernel/perf_event.c

@@ -53,7 +53,12 @@ armpmu_map_cache_event(const unsigned (*cache_map)
 static int
 armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
 {
-	int mapping = (*event_map)[config];
+	int mapping;
+
+	if (config >= PERF_COUNT_HW_MAX)
+		return -EINVAL;
+
+	mapping = (*event_map)[config];
 	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
 }
 
@@ -253,6 +258,9 @@ validate_event(struct pmu_hw_events *hw_events,
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	struct pmu *leader_pmu = event->group_leader->pmu;
 
+	if (is_software_event(event))
+		return 1;
+
 	if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
 		return 1;
 

arch/arm/kernel/process.c

@@ -197,6 +197,7 @@ void machine_shutdown(void)
  */
 void machine_halt(void)
 {
+	local_irq_disable();
 	smp_send_stop();
 
 	local_irq_disable();
@@ -211,6 +212,7 @@ void machine_halt(void)
  */
 void machine_power_off(void)
 {
+	local_irq_disable();
 	smp_send_stop();
 
 	if (pm_power_off)
@@ -230,6 +232,7 @@ void machine_power_off(void)
  */
 void machine_restart(char *cmd)
 {
+	local_irq_disable();
 	smp_send_stop();
 
 	arm_pm_restart(reboot_mode, cmd);
@@ -426,10 +429,11 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 }
 
 #ifdef CONFIG_MMU
+#ifdef CONFIG_KUSER_HELPERS
 /*
  * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code. Insert it into the
+ * atomic helpers. Insert it into the gate_vma so that it is visible
- * gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
+ * through ptrace and /proc/<pid>/mem.
  */
 static struct vm_area_struct gate_vma = {
 	.vm_start	= 0xffff0000,
@@ -458,9 +462,48 @@ int in_gate_area_no_mm(unsigned long addr)
 {
 	return in_gate_area(NULL, addr);
 }
+#define is_gate_vma(vma)	((vma) == &gate_vma)
+#else
+#define is_gate_vma(vma)	0
+#endif
 
 const char *arch_vma_name(struct vm_area_struct *vma)
 {
-	return (vma == &gate_vma) ? "[vectors]" : NULL;
+	return is_gate_vma(vma) ? "[vectors]" :
+		(vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ?
+		 "[sigpage]" : NULL;
+}
+
+static struct page *signal_page;
+extern struct page *get_signal_page(void);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr;
+	int ret;
+
+	if (!signal_page)
+		signal_page = get_signal_page();
+	if (!signal_page)
+		return -ENOMEM;
+
+	down_write(&mm->mmap_sem);
+	addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+		VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+		&signal_page);
+
+	if (ret == 0)
+		mm->context.sigpage = addr;
+
+ up_fail:
+	up_write(&mm->mmap_sem);
+	return ret;
 }
 #endif

arch/arm/kernel/setup.c

@@ -836,6 +836,8 @@ static int __init meminfo_cmp(const void *_a, const void *_b)
 void __init hyp_mode_check(void)
 {
 #ifdef CONFIG_ARM_VIRT_EXT
+	sync_boot_mode();
+
 	if (is_hyp_mode_available()) {
 		pr_info("CPU: All CPU(s) started in HYP mode.\n");
 		pr_info("CPU: Virtualization extensions available.\n");
@@ -971,6 +973,7 @@ static const char *hwcap_str[] = {
 	"vfpv4",
 	"idiva",
 	"idivt",
+	"vfpd32",
 	"lpae",
 	NULL
 };

arch/arm/kernel/signal.c

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/errno.h>
+#include <linux/random.h>
 #include <linux/signal.h>
 #include <linux/personality.h>
 #include <linux/uaccess.h>
@@ -15,12 +16,11 @@
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
+#include <asm/traps.h>
 #include <asm/ucontext.h>
 #include <asm/unistd.h>
 #include <asm/vfp.h>
 
-#include "signal.h"
-
 /*
  * For ARM syscalls, we encode the syscall number into the instruction.
  */
@@ -40,11 +40,13 @@
 #define SWI_THUMB_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
 #define SWI_THUMB_RT_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
 
-const unsigned long sigreturn_codes[7] = {
+static const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_SIGRETURN,    SWI_SYS_SIGRETURN,    SWI_THUMB_SIGRETURN,
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
+static unsigned long signal_return_offset;
+
 #ifdef CONFIG_CRUNCH
 static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 {
@@ -400,14 +402,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		    __put_user(sigreturn_codes[idx+1], rc+1))
 			return 1;
 
-		if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) {
+#ifdef CONFIG_MMU
+		if (cpsr & MODE32_BIT) {
+			struct mm_struct *mm = current->mm;
+
 			/*
-			 * 32-bit code can use the new high-page
+			 * 32-bit code can use the signal return page
-			 * signal return code support except when the MPU has
+			 * except when the MPU has protected the vectors
-			 * protected the vectors page from PL0
+			 * page from PL0
 			 */
-			retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
+			retcode = mm->context.sigpage + signal_return_offset +
-		} else {
+				  (idx << 2) + thumb;
+		} else
+#endif
+		{
 			/*
 			 * Ensure that the instruction cache sees
 			 * the return code written onto the stack.
@@ -608,3 +616,33 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	} while (thread_flags & _TIF_WORK_MASK);
 	return 0;
 }
+
+struct page *get_signal_page(void)
+{
+	unsigned long ptr;
+	unsigned offset;
+	struct page *page;
+	void *addr;
+
+	page = alloc_pages(GFP_KERNEL, 0);
+
+	if (!page)
+		return NULL;
+
+	addr = page_address(page);
+
+	/* Give the signal return code some randomness */
+	offset = 0x200 + (get_random_int() & 0x7fc);
+	signal_return_offset = offset;
+
+	/*
+	 * Copy signal return handlers into the vector page, and
+	 * set sigreturn to be a pointer to these.
+	 */
+	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
+
+	ptr = (unsigned long)addr + offset;
+	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+
+	return page;
+}

arch/arm/kernel/signal.h

@@ -1,12 +0,0 @@
-/*
- *  linux/arch/arm/kernel/signal.h
- *
- *  Copyright (C) 2005-2009 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
-
-extern const unsigned long sigreturn_codes[7];

arch/arm/kernel/smp.c

@@ -145,6 +145,16 @@ int boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return -ENOSYS;
 }
 
+int platform_can_cpu_hotplug(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	if (smp_ops.cpu_kill)
+		return 1;
+#endif
+
+	return 0;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static void percpu_timer_stop(void);
 

arch/arm/kernel/smp_tlb.c

@@ -70,23 +70,6 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
-#ifdef CONFIG_ARM_ERRATA_798181
-static int erratum_a15_798181(void)
-{
-	unsigned int midr = read_cpuid_id();
-
-	/* Cortex-A15 r0p0..r3p2 affected */
-	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
-		return 0;
-	return 1;
-}
-#else
-static int erratum_a15_798181(void)
-{
-	return 0;
-}
-#endif
-
 static void ipi_flush_tlb_a15_erratum(void *arg)
 {
 	dmb();

arch/arm/kernel/traps.c

@@ -35,8 +35,6 @@
 #include <asm/tls.h>
 #include <asm/system_misc.h>
 
-#include "signal.h"
-
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
 void *vectors_page;
@@ -800,15 +798,26 @@ void __init trap_init(void)
 	return;
 }
 
-static void __init kuser_get_tls_init(unsigned long vectors)
+#ifdef CONFIG_KUSER_HELPERS
+static void __init kuser_init(void *vectors)
 {
+	extern char __kuser_helper_start[], __kuser_helper_end[];
+	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+
+	memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+
 	/*
 	 * vectors + 0xfe0 = __kuser_get_tls
 	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
 	 */
 	if (tls_emu || has_tls_reg)
-		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+		memcpy(vectors + 0xfe0, vectors + 0xfe8, 4);
 }
+#else
+static void __init kuser_init(void *vectors)
+{
+}
+#endif
 
 void __init early_trap_init(void *vectors_base)
 {
@@ -816,33 +825,30 @@ void __init early_trap_init(void *vectors_base)
 	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
-	extern char __kuser_helper_start[], __kuser_helper_end[];
+	unsigned i;
-	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
 
 	vectors_page = vectors_base;
 
+	/*
+	 * Poison the vectors page with an undefined instruction.  This
+	 * instruction is chosen to be undefined for both ARM and Thumb
+	 * ISAs.  The Thumb version is an undefined instruction with a
+	 * branch back to the undefined instruction.
+	 */
+	for (i = 0; i < PAGE_SIZE / sizeof(u32); i++)
+		((u32 *)vectors_base)[i] = 0xe7fddef1;
+
 	/*
 	 * Copy the vectors, stubs and kuser helpers (in entry-armv.S)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
 	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
+	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
-	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
-	/*
+	kuser_init(vectors_base);
-	 * Do processor specific fixups for the kuser helpers
-	 */
-	kuser_get_tls_init(vectors);
 
-	/*
+	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
-	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
-	       sigreturn_codes, sizeof(sigreturn_codes));
-
-	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
 #else /* ifndef CONFIG_CPU_V7M */
 	/*

arch/arm/kernel/vmlinux.lds.S

@@ -148,6 +148,23 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
 #endif
+	/*
+	 * The vectors and stubs are relocatable code, and the
+	 * only thing that matters is their relative offsets
+	 */
+	__vectors_start = .;
+	.vectors 0 : AT(__vectors_start) {
+		*(.vectors)
+	}
+	. = __vectors_start + SIZEOF(.vectors);
+	__vectors_end = .;
+
+	__stubs_start = .;
+	.stubs 0x1000 : AT(__stubs_start) {
+		*(.stubs)
+	}
+	. = __stubs_start + SIZEOF(.stubs);
+	__stubs_end = .;
 
 	INIT_TEXT_SECTION(8)
 	.exit.text : {

arch/arm/mach-msm/Kconfig

@@ -121,8 +121,7 @@ config MSM_SMD
 	bool
 
 config MSM_GPIOMUX
-	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+	bool
-	bool "MSM V1 TLMM GPIOMUX architecture"
 	help
 	  Support for MSM V1 TLMM GPIOMUX architecture.
 

arch/arm/mach-msm/gpiomux-v1.c

@@ -1,33 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
-	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
-				((gpio & 0x3ff) << 4);
-	unsigned tlmm_disable = 0;
-	int rc;
-
-	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-			   &tlmm_config, &tlmm_disable);
-	if (rc)
-		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
-		       __func__, rc, tlmm_config, tlmm_disable);
-}

arch/arm/mach-msm/gpiomux.h

@@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
 int msm_gpiomux_write(unsigned gpio,
 		      gpiomux_config_t active,
 		      gpiomux_config_t suspended);
-
-/* Architecture-internal function for use by the framework only.
- * This function can assume the following:
- * - the gpio value has passed a bounds-check
- * - the gpiomux spinlock has been obtained
- *
- * This function is not for public consumption.  External users
- * should use msm_gpiomux_write.
- */
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
 #else
 static inline int msm_gpiomux_write(unsigned gpio,
 				    gpiomux_config_t active,

arch/arm/mach-omap2/dss-common.c

@@ -42,7 +42,7 @@
 
 /* Using generic display panel */
 static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 3,
+	.i2c_bus_num		= 2,
 	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 };
 

arch/arm/mach-omap2/omap_device.c

@@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	const char *oh_name;
 	int oh_cnt, i, ret = 0;
+	bool device_active = false;
 
 	oh_cnt = of_property_count_strings(node, "ti,hwmods");
 	if (oh_cnt <= 0) {
@@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 			goto odbfd_exit1;
 		}
 		hwmods[i] = oh;
+		if (oh->flags & HWMOD_INIT_NO_IDLE)
+			device_active = true;
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
@@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 
 	pdev->dev.pm_domain = &omap_device_pm_domain;
 
+	if (device_active) {
+		omap_device_enable(pdev);
+		pm_runtime_set_active(&pdev->dev);
+	}
+
 odbfd_exit1:
 	kfree(hwmods);
 odbfd_exit:
@@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
+	int i;
 
 	if (!od)
 		return 0;
@@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 	 * If omap_device state is enabled, but has no driver bound,
 	 * idle it.
 	 */
+
+	/*
+	 * Some devices (like memory controllers) are always kept
+	 * enabled, and should not be idled even with no drivers.
+	 */
+	for (i = 0; i < od->hwmods_cnt; i++)
+		if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
+			return 0;
+
 	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
 		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
 			dev_warn(dev, "%s: enabled but no driver.  Idling\n",

arch/arm/mach-omap2/omap_hwmod.c

@@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 
 		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
 		if (np)
-			va_start = of_iomap(np, 0);
+			va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}

arch/arm/mach-omap2/omap_hwmod.h

@@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 #define MODULEMODE_HWCTRL		1
 #define MODULEMODE_SWCTRL		2
 
+#define DEBUG_OMAP2UART1_FLAGS	0
+#define DEBUG_OMAP2UART2_FLAGS	0
+#define DEBUG_OMAP2UART3_FLAGS	0
+#define DEBUG_OMAP3UART3_FLAGS	0
+#define DEBUG_OMAP3UART4_FLAGS	0
+#define DEBUG_OMAP4UART3_FLAGS	0
+#define DEBUG_OMAP4UART4_FLAGS	0
+#define DEBUG_TI81XXUART1_FLAGS	0
+#define DEBUG_TI81XXUART2_FLAGS	0
+#define DEBUG_TI81XXUART3_FLAGS	0
+#define DEBUG_AM33XXUART1_FLAGS	0
+
+#define DEBUG_OMAPUART_FLAGS	(HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
+
+#if defined(CONFIG_DEBUG_OMAP2UART1)
+#undef DEBUG_OMAP2UART1_FLAGS
+#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART2)
+#undef DEBUG_OMAP2UART2_FLAGS
+#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART3)
+#undef DEBUG_OMAP2UART3_FLAGS
+#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART3)
+#undef DEBUG_OMAP3UART3_FLAGS
+#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART4)
+#undef DEBUG_OMAP3UART4_FLAGS
+#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART3)
+#undef DEBUG_OMAP4UART3_FLAGS
+#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART4)
+#undef DEBUG_OMAP4UART4_FLAGS
+#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART1)
+#undef DEBUG_TI81XXUART1_FLAGS
+#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART2)
+#undef DEBUG_TI81XXUART2_FLAGS
+#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART3)
+#undef DEBUG_TI81XXUART3_FLAGS
+#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_AM33XXUART1)
+#undef DEBUG_AM33XXUART1_FLAGS
+#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#endif
 
 /**
  * struct omap_hwmod_mux_info - hwmod specific mux configuration
@@ -568,6 +616,7 @@ struct omap_hwmod_link {
  * @voltdm: pointer to voltage domain (filled in at runtime)
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
+ * @mpu_rt_idx: index of device address space for register target (for DT boot)
  * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port: cached MPU register target slave (internal use)
  * @opt_clks_cnt: number of @opt_clks
@@ -617,6 +666,7 @@ struct omap_hwmod {
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
 	u16				flags;
+	u8				mpu_rt_idx;
 	u8				response_lat;
 	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = {
 	.clkdm_name	= "cpsw_125mhz_clkdm",
 	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
 	.main_clk	= "cpsw_125mhz_gclk",
+	.mpu_rt_idx	= 1,
 	.prcm		= {
 		.omap4	= {
 			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
@@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &uart_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
 	.prcm		= {
 		.omap4	= {

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
+				HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
@@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+	.flags		= DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
-				HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= DEBUG_OMAP4UART3_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= DEBUG_OMAP4UART4_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/serial.c

@@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void)
 				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
 					uart_name, uart->num);
 			}
-
-			/*
-			 * omap-uart can be used for earlyprintk logs
-			 * So if omap-uart is used as console then prevent
-			 * uart reset and idle to get logs from omap-uart
-			 * until uart console driver is available to take
-			 * care for console messages.
-			 * Idling or resetting omap-uart while printing logs
-			 * early boot logs can stall the boot-up.
-			 */
-			oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
 		}
 	} while (1);
 

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1162,9 +1162,6 @@ static void __init eva_init(void)
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
-	/* Touchscreen */
-	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
 	/* GETHER */
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 

arch/arm/mach-shmobile/board-bockw.c

@@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "usb1", "usb1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0", "sdhi0"),
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_wp", "sdhi0"),
 };
 
 #define FPGA	0x18200000

arch/arm/mach-shmobile/board-lager.c

@@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = {
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
-static __initdata struct gpio_keys_button gpio_buttons[] = {
+static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(1, 28),	"SW2-pin4"),
 	GPIO_KEY(KEY_3,		RCAR_GP_PIN(1, 26),	"SW2-pin3"),
 	GPIO_KEY(KEY_2,		RCAR_GP_PIN(1, 24),	"SW2-pin2"),

arch/arm/mach-sti/headsmp.S

@@ -16,8 +16,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * ST specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mm/Kconfig

@@ -421,24 +421,28 @@ config CPU_32v3
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v4
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v4T
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v5
 	bool
 	select CPU_USE_DOMAINS if MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select TLS_REG_EMUL if SMP || !MMU
+	select NEED_KUSER_HELPERS
 
 config CPU_32v6
 	bool
@@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE
 
 config TLS_REG_EMUL
 	bool
+	select NEED_KUSER_HELPERS
 	help
 	  An SMP system using a pre-ARMv6 processor (there are apparently
 	  a few prototypes like that in existence) and therefore access to
@@ -783,11 +788,40 @@ config TLS_REG_EMUL
 
 config NEEDS_SYSCALL_FOR_CMPXCHG
 	bool
+	select NEED_KUSER_HELPERS
 	help
 	  SMP on a pre-ARMv6 processor?  Well OK then.
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config NEED_KUSER_HELPERS
+	bool
+
+config KUSER_HELPERS
+	bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+	default y
+	help
+	  Warning: disabling this option may break user programs.
+
+	  Provide kuser helpers in the vector page.  The kernel provides
+	  helper code to userspace in read only form at a fixed location
+	  in the high vector page to allow userspace to be independent of
+	  the CPU type fitted to the system.  This permits binaries to be
+	  run on ARMv4 through to ARMv7 without modification.
+
+	  However, the fixed address nature of these helpers can be used
+	  by ROP (return orientated programming) authors when creating
+	  exploits.
+
+	  If all of the binaries and libraries which run on your platform
+	  are built specifically for your platform, and make no use of
+	  these helpers, then you can turn this option off.  However,
+	  when such an binary or library is run, it will receive a SIGILL
+	  signal, which will terminate the program.
+
+	  Say N here only if you are absolutely certain that you do not
+	  need these helpers; otherwise, the safe option is to say Y.
+
 config DMA_CACHE_RWFO
 	bool "Enable read/write for ownership DMA cache maintenance"
 	depends on CPU_V6K && SMP

arch/arm/mm/context.c

@@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
-		dummy_flush_tlb_a15_erratum();
+		if (erratum_a15_798181())
+			dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);

arch/arm/mm/mmu.c

@@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
 
 void __init sanity_check_meminfo(void)
 {
+	phys_addr_t memblock_limit = 0;
 	int i, j, highmem = 0;
 	phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
 
@@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void)
 			bank->size = size_limit;
 		}
 #endif
-		if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
+		if (!bank->highmem) {
-			arm_lowmem_limit = bank->start + bank->size;
+			phys_addr_t bank_end = bank->start + bank->size;
 
+			if (bank_end > arm_lowmem_limit)
+				arm_lowmem_limit = bank_end;
+
+			/*
+			 * Find the first non-section-aligned page, and point
+			 * memblock_limit at it. This relies on rounding the
+			 * limit down to be section-aligned, which happens at
+			 * the end of this function.
+			 *
+			 * With this algorithm, the start or end of almost any
+			 * bank can be non-section-aligned. The only exception
+			 * is that the start of the bank 0 must be section-
+			 * aligned, since otherwise memory would need to be
+			 * allocated when mapping the start of bank 0, which
+			 * occurs before any free memory is mapped.
+			 */
+			if (!memblock_limit) {
+				if (!IS_ALIGNED(bank->start, SECTION_SIZE))
+					memblock_limit = bank->start;
+				else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
+					memblock_limit = bank_end;
+			}
+		}
 		j++;
 	}
 #ifdef CONFIG_HIGHMEM
@@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void)
 #endif
 	meminfo.nr_banks = j;
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
-	memblock_set_current_limit(arm_lowmem_limit);
+
+	/*
+	 * Round the memblock limit down to a section size.  This
+	 * helps to ensure that we will allocate memory from the
+	 * last full section, which should be mapped.
+	 */
+	if (memblock_limit)
+		memblock_limit = round_down(memblock_limit, SECTION_SIZE);
+	if (!memblock_limit)
+		memblock_limit = arm_lowmem_limit;
+
+	memblock_set_current_limit(memblock_limit);
 }
 
 static inline void prepare_page_table(void)
@@ -1160,7 +1195,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = early_alloc(PAGE_SIZE);
+	vectors = early_alloc(PAGE_SIZE * 2);
 
 	early_trap_init(vectors);
 
@@ -1205,15 +1240,27 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
 	map.virtual = 0xffff0000;
 	map.length = PAGE_SIZE;
+#ifdef CONFIG_KUSER_HELPERS
 	map.type = MT_HIGH_VECTORS;
+#else
+	map.type = MT_LOW_VECTORS;
+#endif
 	create_mapping(&map);
 
 	if (!vectors_high()) {
 		map.virtual = 0;
+		map.length = PAGE_SIZE * 2;
 		map.type = MT_LOW_VECTORS;
 		create_mapping(&map);
 	}
 
+	/* Now create a kernel read-only mapping */
+	map.pfn += 1;
+	map.virtual = 0xffff0000 + PAGE_SIZE;
+	map.length = PAGE_SIZE;
+	map.type = MT_LOW_VECTORS;
+	create_mapping(&map);
+
 	/*
 	 * Ask the machine support to map in the statically mapped devices.
 	 */
@@ -1276,8 +1323,6 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
-	memblock_set_current_limit(arm_lowmem_limit);
-
 	build_mem_type_table();
 	prepare_page_table();
 	map_lowmem();

arch/arm/mm/proc-v7-2level.S

@@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext)
  ARM(	str	r3, [r0, #2048]! )
  THUMB(	add	r0, r0, #2048 )
  THUMB(	str	r3, [r0] )
-	ALT_SMP(mov	pc,lr)
+	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
 #endif
 	mov	pc, lr

arch/arm/mm/proc-v7-3level.S

@@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext)
 	tst	r3, #1 << (55 - 32)		@ L_PTE_DIRTY
 	orreq	r2, #L_PTE_RDONLY
 1:	strd	r2, r3, [r0]
-	ALT_SMP(mov	pc, lr)
+	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
 #endif
 	mov	pc, lr

arch/arm/mm/proc-v7.S

@@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle)
 ENDPROC(cpu_v7_do_idle)
 
 ENTRY(cpu_v7_dcache_clean_area)
-	ALT_SMP(mov	pc, lr)			@ MP extensions imply L1 PTW
+	ALT_SMP(W(nop))			@ MP extensions imply L1 PTW
-	ALT_UP(W(nop))
+	ALT_UP_B(1f)
-	dcache_line_size r2, r3
+	mov	pc, lr
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+1:	dcache_line_size r2, r3
+2:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, r2
 	subs	r1, r1, r2
-	bhi	1b
+	bhi	2b
 	dsb
 	mov	pc, lr
 ENDPROC(cpu_v7_dcache_clean_area)

arch/arm/xen/enlighten.c

@@ -172,7 +172,7 @@ static void __init xen_percpu_init(void *unused)
 	enable_percpu_irq(xen_events_irq, 0);
 }
 
-static void xen_restart(char str, const char *cmd)
+static void xen_restart(enum reboot_mode reboot_mode, const char *cmd)
 {
 	struct sched_shutdown r = { .reason = SHUTDOWN_reboot };
 	int rc;

arch/arm64/include/asm/tlb.h

@@ -35,6 +35,7 @@ struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
 	struct vm_area_struct	*vma;
+	unsigned long		start, end;
 	unsigned long		range_start;
 	unsigned long		range_end;
 	unsigned int		nr;
@@ -97,10 +98,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = fullmm;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->vma = NULL;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;

arch/avr32/boards/atngw100/mrmt.c

@@ -150,7 +150,6 @@ static struct ac97c_platform_data __initdata ac97c0_data = {
 static struct platform_device rmt_ts_device = {
 	.name	= "ucb1400_ts",
 	.id	= -1,
-	}
 };
 #endif
 

arch/hexagon/Kconfig

@@ -158,6 +158,7 @@ source "kernel/Kconfig.hz"
 endmenu
 
 source "init/Kconfig"
+source "kernel/Kconfig.freezer"
 source "drivers/Kconfig"
 source "fs/Kconfig"
 

arch/ia64/configs/generic_defconfig

@@ -31,7 +31,7 @@ CONFIG_ACPI_FAN=m
 CONFIG_ACPI_DOCK=y
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/ia64/configs/gensparse_defconfig

@@ -25,7 +25,7 @@ CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/ia64/configs/tiger_defconfig

@@ -31,7 +31,7 @@ CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/ia64/configs/xen_domu_defconfig

@@ -32,7 +32,7 @@ CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/ia64/include/asm/tlb.h

@@ -22,7 +22,7 @@
  * unmapping a portion of the virtual address space, these hooks are called according to
  * the following template:
  *
- *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
+ *	tlb <- tlb_gather_mmu(mm, start, end);		// start unmap for address space MM
  *	{
  *	  for each vma that needs a shootdown do {
  *	    tlb_start_vma(tlb, vma);
@@ -58,6 +58,7 @@ struct mmu_gather {
 	unsigned int		max;
 	unsigned char		fullmm;		/* non-zero means full mm flush */
 	unsigned char		need_flush;	/* really unmapped some PTEs? */
+	unsigned long		start, end;
 	unsigned long		start_addr;
 	unsigned long		end_addr;
 	struct page		**pages;
@@ -155,13 +156,15 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;
 	tlb->nr = 0;
-	tlb->fullmm = full_mm_flush;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->start_addr = ~0UL;
 }
 

arch/m68k/emu/natfeat.c

@@ -18,9 +18,11 @@
 #include <asm/machdep.h>
 #include <asm/natfeat.h>
 
+extern long nf_get_id2(const char *feature_name);
+
 asm("\n"
-"	.global nf_get_id,nf_call\n"
+"	.global nf_get_id2,nf_call\n"
-"nf_get_id:\n"
+"nf_get_id2:\n"
 "	.short	0x7300\n"
 "	rts\n"
 "nf_call:\n"
@@ -29,12 +31,25 @@ asm("\n"
 "1:	moveq.l	#0,%d0\n"
 "	rts\n"
 "	.section __ex_table,\"a\"\n"
-"	.long	nf_get_id,1b\n"
+"	.long	nf_get_id2,1b\n"
 "	.long	nf_call,1b\n"
 "	.previous");
-EXPORT_SYMBOL_GPL(nf_get_id);
 EXPORT_SYMBOL_GPL(nf_call);
 
+long nf_get_id(const char *feature_name)
+{
+	/* feature_name may be in vmalloc()ed memory, so make a copy */
+	char name_copy[32];
+	size_t n;
+
+	n = strlcpy(name_copy, feature_name, sizeof(name_copy));
+	if (n >= sizeof(name_copy))
+		return 0;
+
+	return nf_get_id2(name_copy);
+}
+EXPORT_SYMBOL_GPL(nf_get_id);
+
 void nfprint(const char *fmt, ...)
 {
 	static char buf[256];

arch/m68k/include/asm/div64.h

@@ -15,16 +15,17 @@
 		unsigned long long n64;				\
 	} __n;							\
 	unsigned long __rem, __upper;				\
+	unsigned long __base = (base);				\
 								\
 	__n.n64 = (n);						\
 	if ((__upper = __n.n32[0])) {				\
 		asm ("divul.l %2,%1:%0"				\
-			: "=d" (__n.n32[0]), "=d" (__upper)	\
+		     : "=d" (__n.n32[0]), "=d" (__upper)	\
-			: "d" (base), "0" (__n.n32[0]));	\
+		     : "d" (__base), "0" (__n.n32[0]));		\
 	}							\
 	asm ("divu.l %2,%1:%0"					\
-		: "=d" (__n.n32[1]), "=d" (__rem)		\
+	     : "=d" (__n.n32[1]), "=d" (__rem)			\
-		: "d" (base), "1" (__upper), "0" (__n.n32[1]));	\
+	     : "d" (__base), "1" (__upper), "0" (__n.n32[1]));	\
 	(n) = __n.n64;						\
 	__rem;							\
 })

arch/microblaze/Kconfig

@@ -28,7 +28,7 @@ config MICROBLAZE
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IDLE_POLL_SETUP
 	select MODULES_USE_ELF_RELA
-	select CLONE_BACKWARDS
+	select CLONE_BACKWARDS3
 
 config SWAP
 	def_bool n

arch/mips/Kconfig

@@ -114,6 +114,7 @@ config BCM47XX
 	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN

arch/mips/bcm47xx/Kconfig

@@ -2,7 +2,6 @@ if BCM47XX
 
 config BCM47XX_SSB
 	bool "SSB Support for Broadcom BCM47XX"
-	select SYS_HAS_CPU_MIPS32_R1
 	select SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF

arch/mips/include/asm/cpu-features.h

@@ -17,6 +17,8 @@
 #define current_cpu_type()	current_cpu_data.cputype
 #endif
 
+#define boot_cpu_type()		cpu_data[0].cputype
+
 /*
  * SMP assumption: Options of CPU 0 are a superset of all processors.
  * This is true for all known MIPS systems.

arch/mips/include/asm/mach-generic/spaces.h

@@ -25,8 +25,12 @@
 #else
 #define CAC_BASE		_AC(0x80000000, UL)
 #endif
+#ifndef IO_BASE
 #define IO_BASE			_AC(0xa0000000, UL)
+#endif
+#ifndef UNCAC_BASE
 #define UNCAC_BASE		_AC(0xa0000000, UL)
+#endif
 
 #ifndef MAP_BASE
 #ifdef CONFIG_KVM_GUEST

arch/mips/include/uapi/asm/siginfo.h

@@ -25,11 +25,12 @@ struct siginfo;
 /*
  * Careful to keep union _sifields from shifting ...
  */
-#if __SIZEOF_LONG__ == 4
+#if _MIPS_SZLONG == 32
 #define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
-#endif
+#elif _MIPS_SZLONG == 64
-#if __SIZEOF_LONG__ == 8
 #define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#else
+#error _MIPS_SZLONG neither 32 nor 64
 #endif
 
 #include <asm-generic/siginfo.h>

arch/mips/kernel/bmips_vec.S

@@ -54,7 +54,11 @@ LEAF(bmips_smp_movevec)
 	/* set up CPU1 CBR; move BASE to 0xa000_0000 */
 	li	k0, 0xff400000
 	mtc0	k0, $22, 6
-	li	k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1
+	/* set up relocation vector address based on thread ID */
+	mfc0	k1, $22, 3
+	srl	k1, 16
+	andi	k1, 0x8000
+	or	k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0
 	or	k0, k1
 	li	k1, 0xa0080000
 	sw	k1, 0(k0)

arch/mips/kernel/smp-bmips.c

@@ -66,6 +66,8 @@ static void __init bmips_smp_setup(void)
 	int i, cpu = 1, boot_cpu = 0;
 
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+	int cpu_hw_intr;
+
 	/* arbitration priority */
 	clear_c0_brcm_cmt_ctrl(0x30);
 
@@ -79,15 +81,13 @@ static void __init bmips_smp_setup(void)
 	 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
 	 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
 	 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
-	 *
-	 * If booting from TP1, leave the existing CMT interrupt routing
-	 * such that TP0 responds to SW1 and TP1 responds to SW0.
 	 */
 	if (boot_cpu == 0)
-		change_c0_brcm_cmt_intr(0xf8018000,
+		cpu_hw_intr = 0x02;
-					(0x02 << 27) | (0x03 << 15));
 	else
-		change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
+		cpu_hw_intr = 0x1d;
+
+	change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
 
 	/* single core, 2 threads (2 pipelines) */
 	max_cpus = 2;
@@ -202,9 +202,15 @@ static void bmips_init_secondary(void)
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
 	void __iomem *cbr = BMIPS_GET_CBR();
 	unsigned long old_vec;
+	unsigned long relo_vector;
+	int boot_cpu;
 
-	old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+	boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
-	__raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+	relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
+			  BMIPS_RELO_VECTOR_CONTROL_1;
+
+	old_vec = __raw_readl(cbr + relo_vector);
+	__raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
 
 	clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
 #elif defined(CONFIG_CPU_BMIPS5000)

arch/mips/oprofile/op_model_mipsxx.c

@@ -166,7 +166,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
 			reg.control[i] |= M_PERFCTL_USER;
 		if (ctr[i].exl)
 			reg.control[i] |= M_PERFCTL_EXL;
-		if (current_cpu_type() == CPU_XLR)
+		if (boot_cpu_type() == CPU_XLR)
 			reg.control[i] |= M_PERFCTL_COUNT_ALL_THREADS;
 		reg.counter[i] = 0x80000000 - ctr[i].count;
 	}

arch/mips/pnx833x/common/platform.c

@@ -206,11 +206,13 @@ static struct resource pnx833x_ethernet_resources[] = {
 		.end   = PNX8335_IP3902_PORTS_END,
 		.flags = IORESOURCE_MEM,
 	},
+#ifdef CONFIG_SOC_PNX8335
 	[1] = {
 		.start = PNX8335_PIC_ETHERNET_INT,
 		.end   = PNX8335_PIC_ETHERNET_INT,
 		.flags = IORESOURCE_IRQ,
 	},
+#endif
 };
 
 static struct platform_device pnx833x_ethernet_device = {

arch/mips/powertv/asic/asic_devices.c

@@ -529,8 +529,7 @@ EXPORT_SYMBOL(asic_resource_get);
  */
 void platform_release_memory(void *ptr, int size)
 {
-	free_reserved_area((unsigned long)ptr, (unsigned long)(ptr + size),
+	free_reserved_area(ptr, ptr + size, -1, NULL);
-			   -1, NULL);
 }
 EXPORT_SYMBOL(platform_release_memory);
 

arch/openrisc/Kconfig

@@ -55,6 +55,7 @@ config GENERIC_CSUM
 
 source "init/Kconfig"
 
+source "kernel/Kconfig.freezer"
 
 menu "Processor type and features"
 

arch/parisc/configs/c8000_defconfig

@@ -0,0 +1,279 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PA8X00=y
+CONFIG_MLONGCALLS=y
+CONFIG_64BIT=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_IOMMU_CCIO=y
+CONFIG_PCI=y
+CONFIG_PCI_LBA=y
+# CONFIG_SUPERIO is not set
+# CONFIG_CHASSIS_LCD_LED is not set
+# CONFIG_PDC_CHASSIS is not set
+# CONFIG_PDC_CHASSIS_WARN is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+# CONFIG_IPV6 is not set
+CONFIG_IP_DCCP=m
+# CONFIG_IP_DCCP_CCID3 is not set
+CONFIG_TIPC=m
+CONFIG_LLC2=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_BLK_DEV_UMEM=m
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_WCACHE=y
+CONFIG_ATA_OVER_ETH=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_PLATFORM=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_SIIMAGE=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_SAS=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=m
+CONFIG_TUN=y
+CONFIG_E1000=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_HIL_OLD is not set
+# CONFIG_KEYBOARD_HIL is not set
+CONFIG_MOUSE_PS2=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_CM109=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_PARKBD=m
+CONFIG_SERIO_GSCPS2=m
+# CONFIG_HP_SDC is not set
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_MUX is not set
+CONFIG_SERIAL_JSM=m
+CONFIG_PRINTER=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_SSB=m
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_STI is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_STI_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_AD1889=m
+# CONFIG_SND_USB is not set
+# CONFIG_SND_GSC is not set
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=m
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_NFS_FS=m
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_RT_MUTEX_TESTER=y
+CONFIG_PROVE_RCU_DELAY=y
+CONFIG_DEBUG_BLOCK_EXT_DEVT=y
+CONFIG_LATENCYTOP=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_KEYS=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_FONTS=y

arch/parisc/include/asm/parisc-device.h

@@ -23,6 +23,7 @@ struct parisc_device {
 	/* generic info returned from pdc_pat_cell_module() */
 	unsigned long	mod_info;	/* PAT specific - Misc Module info */
 	unsigned long	pmod_loc;	/* physical Module location */
+	unsigned long	mod0;
 #endif
 	u64		dma_mask;	/* DMA mask for I/O */
 	struct device 	dev;
@@ -61,4 +62,6 @@ parisc_get_drvdata(struct parisc_device *d)
 
 extern struct bus_type parisc_bus_type;
 
+int iosapic_serial_irq(struct parisc_device *dev);
+
 #endif /*_ASM_PARISC_PARISC_DEVICE_H_*/

arch/parisc/kernel/cache.c

@@ -71,18 +71,27 @@ flush_cache_all_local(void)
 }
 EXPORT_SYMBOL(flush_cache_all_local);
 
+/* Virtual address of pfn.  */
+#define pfn_va(pfn)	__va(PFN_PHYS(pfn))
+
 void
 update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
-	struct page *page = pte_page(*ptep);
+	unsigned long pfn = pte_pfn(*ptep);
+	struct page *page;
 
-	if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
+	/* We don't have pte special.  As a result, we can be called with
-	    test_bit(PG_dcache_dirty, &page->flags)) {
+	   an invalid pfn and we don't need to flush the kernel dcache page.
+	   This occurs with FireGL card in C8000.  */
+	if (!pfn_valid(pfn))
+		return;
 
-		flush_kernel_dcache_page(page);
+	page = pfn_to_page(pfn);
+	if (page_mapping(page) && test_bit(PG_dcache_dirty, &page->flags)) {
+		flush_kernel_dcache_page_addr(pfn_va(pfn));
 		clear_bit(PG_dcache_dirty, &page->flags);
 	} else if (parisc_requires_coherency())
-		flush_kernel_dcache_page(page);
+		flush_kernel_dcache_page_addr(pfn_va(pfn));
 }
 
 void
@@ -495,44 +504,42 @@ static inline pte_t *get_ptep(pgd_t *pgd, unsigned long addr)
 
 void flush_cache_mm(struct mm_struct *mm)
 {
+	struct vm_area_struct *vma;
+	pgd_t *pgd;
+
 	/* Flushing the whole cache on each cpu takes forever on
 	   rp3440, etc.  So, avoid it if the mm isn't too big.  */
-	if (mm_total_size(mm) < parisc_cache_flush_threshold) {
+	if (mm_total_size(mm) >= parisc_cache_flush_threshold) {
-		struct vm_area_struct *vma;
+		flush_cache_all();
+		return;
+	}
 
-		if (mm->context == mfsp(3)) {
+	if (mm->context == mfsp(3)) {
-			for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		for (vma = mm->mmap; vma; vma = vma->vm_next) {
-				flush_user_dcache_range_asm(vma->vm_start,
+			flush_user_dcache_range_asm(vma->vm_start, vma->vm_end);
-					vma->vm_end);
+			if ((vma->vm_flags & VM_EXEC) == 0)
-				if (vma->vm_flags & VM_EXEC)
+				continue;
-					flush_user_icache_range_asm(
+			flush_user_icache_range_asm(vma->vm_start, vma->vm_end);
-					  vma->vm_start, vma->vm_end);
-			}
-		} else {
-			pgd_t *pgd = mm->pgd;
-
-			for (vma = mm->mmap; vma; vma = vma->vm_next) {
-				unsigned long addr;
-
-				for (addr = vma->vm_start; addr < vma->vm_end;
-				     addr += PAGE_SIZE) {
-					pte_t *ptep = get_ptep(pgd, addr);
-					if (ptep != NULL) {
-						pte_t pte = *ptep;
-						__flush_cache_page(vma, addr,
-						  page_to_phys(pte_page(pte)));
-					}
-				}
-			}
 		}
 		return;
 	}
 
-#ifdef CONFIG_SMP
+	pgd = mm->pgd;
-	flush_cache_all();
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-#else
+		unsigned long addr;
-	flush_cache_all_local();
+
-#endif
+		for (addr = vma->vm_start; addr < vma->vm_end;
+		     addr += PAGE_SIZE) {
+			unsigned long pfn;
+			pte_t *ptep = get_ptep(pgd, addr);
+			if (!ptep)
+				continue;
+			pfn = pte_pfn(*ptep);
+			if (!pfn_valid(pfn))
+				continue;
+			__flush_cache_page(vma, addr, PFN_PHYS(pfn));
+		}
+	}
 }
 
 void
@@ -556,33 +563,32 @@ flush_user_icache_range(unsigned long start, unsigned long end)
 void flush_cache_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end)
 {
+	unsigned long addr;
+	pgd_t *pgd;
+
 	BUG_ON(!vma->vm_mm->context);
 
-	if ((end - start) < parisc_cache_flush_threshold) {
+	if ((end - start) >= parisc_cache_flush_threshold) {
-		if (vma->vm_mm->context == mfsp(3)) {
-			flush_user_dcache_range_asm(start, end);
-			if (vma->vm_flags & VM_EXEC)
-				flush_user_icache_range_asm(start, end);
-		} else {
-			unsigned long addr;
-			pgd_t *pgd = vma->vm_mm->pgd;
-
-			for (addr = start & PAGE_MASK; addr < end;
-			     addr += PAGE_SIZE) {
-				pte_t *ptep = get_ptep(pgd, addr);
-				if (ptep != NULL) {
-					pte_t pte = *ptep;
-					flush_cache_page(vma,
-					   addr, pte_pfn(pte));
-				}
-			}
-		}
-	} else {
-#ifdef CONFIG_SMP
 		flush_cache_all();
-#else
+		return;
-		flush_cache_all_local();
+	}
-#endif
+
+	if (vma->vm_mm->context == mfsp(3)) {
+		flush_user_dcache_range_asm(start, end);
+		if (vma->vm_flags & VM_EXEC)
+			flush_user_icache_range_asm(start, end);
+		return;
+	}
+
+	pgd = vma->vm_mm->pgd;
+	for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
+		unsigned long pfn;
+		pte_t *ptep = get_ptep(pgd, addr);
+		if (!ptep)
+			continue;
+		pfn = pte_pfn(*ptep);
+		if (pfn_valid(pfn))
+			__flush_cache_page(vma, addr, PFN_PHYS(pfn));
 	}
 }
 
@@ -591,9 +597,10 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
 {
 	BUG_ON(!vma->vm_mm->context);
 
-	flush_tlb_page(vma, vmaddr);
+	if (pfn_valid(pfn)) {
-	__flush_cache_page(vma, vmaddr, page_to_phys(pfn_to_page(pfn)));
+		flush_tlb_page(vma, vmaddr);
-
+		__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
+	}
 }
 
 #ifdef CONFIG_PARISC_TMPALIAS

arch/parisc/kernel/inventory.c

@@ -211,6 +211,7 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 	/* REVISIT: who is the consumer of this? not sure yet... */
 	dev->mod_info = pa_pdc_cell->mod_info;	/* pass to PAT_GET_ENTITY() */
 	dev->pmod_loc = pa_pdc_cell->mod_location;
+	dev->mod0 = pa_pdc_cell->mod[0];
 
 	register_parisc_device(dev);	/* advertise device */
 

arch/parisc/kernel/signal.c

@@ -55,13 +55,6 @@
  * this. */
 #define A(__x)	((unsigned long)(__x))
 
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-#ifdef CONFIG_64BIT
-#include "sys32.h"
-#endif
-
 /*
  * Do a signal return - restore sigcontext.
  */

arch/parisc/kernel/signal32.c

@@ -34,7 +34,6 @@
 #include <asm/uaccess.h>
 
 #include "signal32.h"
-#include "sys32.h"
 
 #define DEBUG_COMPAT_SIG 0 
 #define DEBUG_COMPAT_SIG_LEVEL 2