redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'ixp4xx' into devel

Browse source 
Conflicts:

	include/asm-arm/arch-ixp4xx/io.h
This commit is contained in:
Russell King 2007-05-06 20:58:29 +01:00 committed by Russell King
parent 6f95416ebe 28bd3a0dcc
commit 5cd4715515
19 changed files with 656 additions and 35 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/arm/configs/ixp4xx_defconfig
View file

@ -117,11 +117,13 @@ CONFIG_ARCH_ADI_COYOTE=y
CONFIG_ARCH_IXDP425=y
CONFIG_MACH_IXDPG425=y
CONFIG_MACH_IXDP465=y
CONFIG_MACH_KIXRP435=y
CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_MACH_NAS100D=y
CONFIG_ARCH_IXDP4XX=y
CONFIG_CPU_IXP46X=y
CONFIG_CPU_IXP43X=y
# CONFIG_MACH_GTWX5715 is not set
#

22
arch/arm/mach-ixp4xx/Kconfig
View file

@ -62,6 +62,12 @@ config MACH_IXDP465
IXDP465 Development Platform (Also known as BMP).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
config MACH_KIXRP435
bool "KIXRP435"
help
Say 'Y' here if you want your kernel to support Intel's
KIXRP435 Reference Platform.
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
#
# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
@ -89,12 +95,21 @@ config MACH_NAS100D
NAS 100d device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
select PCI
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
#
# Avila and IXDP share the same source for now. Will change in future
#
config ARCH_IXDP4XX
bool
depends on ARCH_IXDP425 || MACH_IXDP465
depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
default y
#
@ -105,6 +120,11 @@ config CPU_IXP46X
depends on MACH_IXDP465
default y
config CPU_IXP43X
bool
depends on MACH_KIXRP435
default y
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX

2
arch/arm/mach-ixp4xx/Makefile
View file

@ -12,6 +12,7 @@ obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
obj-y += common.o
@ -22,5 +23,6 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o

4
arch/arm/mach-ixp4xx/common-pci.c
View file

@ -374,7 +374,7 @@ void __init ixp4xx_pci_preinit(void)
* Determine which PCI read method to use.
* Rev 0 IXP425 requires workaround.
*/
if (!(processor_id & 0xf) && !cpu_is_ixp46x()) {
if (!(processor_id & 0xf) && cpu_is_ixp42x()) {
printk("PCI: IXP42x A0 silicon detected - "
"PCI Non-Prefetch Workaround Enabled\n");
ixp4xx_pci_read = ixp4xx_pci_read_errata;
@ -480,7 +480,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
res[0].flags = IORESOURCE_IO;
res[1].name = "PCI Memory Space";
res[1].start = 0x48000000;
res[1].start = PCIBIOS_MIN_MEM;
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
res[1].end = 0x4bffffff;
#else

29
arch/arm/mach-ixp4xx/common.c
View file

@ -105,6 +105,29 @@ static signed char irq2gpio[32] = {
7, 8, 9, 10, 11, 12, -1, -1,
};
int gpio_to_irq(int gpio)
{
int irq;
for (irq = 0; irq < 32; irq++) {
if (irq2gpio[irq] == gpio)
return irq;
}
return -EINVAL;
}
EXPORT_SYMBOL(gpio_to_irq);
int irq_to_gpio(int irq)
{
int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
if (gpio == -1)
return -EINVAL;
return gpio;
}
EXPORT_SYMBOL(irq_to_gpio);
static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
{
int line = irq2gpio[irq];
@ -172,7 +195,7 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
static void ixp4xx_irq_mask(unsigned int irq)
{
if (cpu_is_ixp46x() && irq >= 32)
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32)
*IXP4XX_ICMR2 &= ~(1 << (irq - 32));
else
*IXP4XX_ICMR &= ~(1 << irq);
@ -195,7 +218,7 @@ static void ixp4xx_irq_unmask(unsigned int irq)
if (!(ixp4xx_irq_edge & (1 << irq)))
ixp4xx_irq_ack(irq);
if (cpu_is_ixp46x() && irq >= 32)
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32)
*IXP4XX_ICMR2 |= (1 << (irq - 32));
else
*IXP4XX_ICMR |= (1 << irq);
@ -219,7 +242,7 @@ void __init ixp4xx_init_irq(void)
/* Disable all interrupt */
*IXP4XX_ICMR = 0x0;
if (cpu_is_ixp46x()) {
if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
/* Route upper 32 sources to IRQ instead of FIQ */
*IXP4XX_ICLR2 = 0x00;

74
arch/arm/mach-ixp4xx/dsmg600-pci.c Normal file
View file

@ -0,0 +1,74 @@
/*
* DSM-G600 board-level PCI initialization
*
* Copyright (C) 2006 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* based on ixdp425-pci.c:
* Copyright (C) 2002 Intel Corporation.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* Maintainer: http://www.nslu2-linux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
void __init dsmg600_pci_preinit(void)
{
set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
ixp4xx_pci_preinit();
}
static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
{
{ IRQ_DSMG600_PCI_INTE, -1, -1 },
{ IRQ_DSMG600_PCI_INTA, -1, -1 },
{ IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
{ IRQ_DSMG600_PCI_INTF, -1, -1 },
};
int irq = -1;
if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
irq = pci_irq_table[slot-1][pin-1];
return irq;
}
struct hw_pci __initdata dsmg600_pci = {
.nr_controllers = 1,
.preinit = dsmg600_pci_preinit,
.swizzle = pci_std_swizzle,
.setup = ixp4xx_setup,
.scan = ixp4xx_scan_bus,
.map_irq = dsmg600_map_irq,
};
int __init dsmg600_pci_init(void)
{
if (machine_is_dsmg600())
pci_common_init(&dsmg600_pci);
return 0;
}
subsys_initcall(dsmg600_pci_init);

125
arch/arm/mach-ixp4xx/dsmg600-power.c Normal file
View file

@ -0,0 +1,125 @@
/*
* arch/arm/mach-ixp4xx/dsmg600-power.c
*
* DSM-G600 Power/Reset driver
* Author: Michael Westerhof <mwester@dls.net>
*
* Based on nslu2-power.c
* Copyright (C) 2005 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* which was based on nslu2-io.c
* Copyright (C) 2004 Karen Spearel
*
* Maintainers: http://www.nslu2-linux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
#include <asm/mach-types.h>
extern void ctrl_alt_del(void);
/* This is used to make sure the power-button pusher is serious. The button
* must be held until the value of this counter reaches zero.
*/
static volatile int power_button_countdown;
/* Must hold the button down for at least this many counts to be processed */
#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
static void dsmg600_power_handler(unsigned long data);
static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
static void dsmg600_power_handler(unsigned long data)
{
/* This routine is called twice per second to check the
* state of the power button.
*/
if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
/* IO Pin is 1 (button pushed) */
if (power_button_countdown == 0) {
/* Signal init to do the ctrlaltdel action, this will bypass
* init if it hasn't started and do a kernel_restart.
*/
ctrl_alt_del();
/* Change the state of the power LED to "blink" */
gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
}
power_button_countdown--;
} else {
power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
}
mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
}
static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
{
/* This is the paper-clip reset, it shuts the machine down directly. */
machine_power_off();
return IRQ_HANDLED;
}
static int __init dsmg600_power_init(void)
{
if (!(machine_is_dsmg600()))
return 0;
if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
DSMG600_RB_IRQ);
return -EIO;
}
/* The power button on the D-Link DSM-G600 is on GPIO 15, but
* it cannot handle interrupts on that GPIO line. So we'll
* have to poll it with a kernel timer.
*/
/* Make sure that the power button GPIO is set up as an input */
gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
/* Set the initial value for the power button IRQ handler */
power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
return 0;
}
static void __exit dsmg600_power_exit(void)
{
if (!(machine_is_dsmg600()))
return;
del_timer_sync(&dsmg600_power_timer);
free_irq(DSMG600_RB_IRQ, NULL);
}
module_init(dsmg600_power_init);
module_exit(dsmg600_power_exit);
MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
MODULE_LICENSE("GPL");

175
arch/arm/mach-ixp4xx/dsmg600-setup.c Normal file
View file

@ -0,0 +1,175 @@
/*
* DSM-G600 board-setup
*
* Copyright (C) 2006 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* based ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
* Maintainers: http://www.nslu2-linux.org/
*/
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
static struct flash_platform_data dsmg600_flash_data = {
.map_name = "cfi_probe",
.width = 2,
};
static struct resource dsmg600_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device dsmg600_flash = {
.name = "IXP4XX-Flash",
.id = 0,
.dev.platform_data = &dsmg600_flash_data,
.num_resources = 1,
.resource = &dsmg600_flash_resource,
};
static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
.sda_pin = DSMG600_SDA_PIN,
.scl_pin = DSMG600_SCL_PIN,
};
static struct platform_device dsmg600_i2c_controller = {
.name = "IXP4XX-I2C",
.id = 0,
.dev.platform_data = &dsmg600_i2c_gpio_pins,
};
#ifdef CONFIG_LEDS_CLASS
static struct resource dsmg600_led_resources[] = {
{
.name = "power",
.start = DSMG600_LED_PWR_GPIO,
.end = DSMG600_LED_PWR_GPIO,
.flags = IXP4XX_GPIO_HIGH,
},
{
.name = "wlan",
.start = DSMG600_LED_WLAN_GPIO,
.end = DSMG600_LED_WLAN_GPIO,
.flags = IXP4XX_GPIO_LOW,
},
};
static struct platform_device dsmg600_leds = {
.name = "IXP4XX-GPIO-LED",
.id = -1,
.num_resources = ARRAY_SIZE(dsmg600_led_resources),
.resource = dsmg600_led_resources,
};
#endif
static struct resource dsmg600_uart_resources[] = {
{
.start = IXP4XX_UART1_BASE_PHYS,
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
},
{
.start = IXP4XX_UART2_BASE_PHYS,
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
}
};
static struct plat_serial8250_port dsmg600_uart_data[] = {
{
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{ }
};
static struct platform_device dsmg600_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev.platform_data = dsmg600_uart_data,
.num_resources = ARRAY_SIZE(dsmg600_uart_resources),
.resource = dsmg600_uart_resources,
};
static struct platform_device *dsmg600_devices[] __initdata = {
&dsmg600_i2c_controller,
&dsmg600_flash,
};
static void dsmg600_power_off(void)
{
/* enable the pwr cntl gpio */
gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
/* poweroff */
gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
}
static void __init dsmg600_init(void)
{
ixp4xx_sys_init();
/* Make sure that GPIO14 and GPIO15 are not used as clocks */
*IXP4XX_GPIO_GPCLKR = 0;
dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
dsmg600_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
pm_power_off = dsmg600_power_off;
/* The UART is required on the DSM-G600 (Redboot cannot use the
* NIC) -- do it here so that it does *not* get removed if
* platform_add_devices fails!
*/
(void)platform_device_register(&dsmg600_uart);
platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
#ifdef CONFIG_LEDS_CLASS
/* We don't care whether or not this works. */
(void)platform_device_register(&dsmg600_leds);
#endif
}
static void __init dsmg600_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
/* The xtal on this machine is non-standard. */
ixp4xx_timer_freq = DSMG600_FREQ;
}
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
.fixup = dsmg600_fixup,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = dsmg600_init,
MACHINE_END

2
arch/arm/mach-ixp4xx/ixdp425-pci.c
View file

@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
int __init ixdp425_pci_init(void)
{
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
machine_is_ixdp465())
machine_is_ixdp465() || machine_is_kixrp435())
pci_common_init(&ixdp425_pci);
return 0;
}

18
arch/arm/mach-ixp4xx/ixdp425-setup.c
View file

@ -115,6 +115,11 @@ static void __init ixdp425_init(void)
ixdp425_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
if (cpu_is_ixp43x()) {
ixdp425_uart.num_resources = 1;
ixdp425_uart_data[1].flags = 0;
}
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
}
@ -156,3 +161,16 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
.init_machine = ixdp425_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_KIXRP435
MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
MACHINE_END
#endif

28
arch/arm/mm/proc-xscale.S
View file

@ -584,6 +584,11 @@ cpu_ixp42x_name:
.asciz "XScale-IXP42x Family"
.size cpu_ixp42x_name, . - cpu_ixp42x_name
.type cpu_ixp43x_name, #object
cpu_ixp43x_name:
.asciz "XScale-IXP43x Family"
.size cpu_ixp43x_name, . - cpu_ixp43x_name
.type cpu_ixp46x_name, #object
cpu_ixp46x_name:
.asciz "XScale-IXP46x Family"
@ -843,6 +848,29 @@ __ixp42x_proc_info:
.long xscale_cache_fns
.size __ixp42x_proc_info, . - __ixp42x_proc_info
.type __ixp43x_proc_info, #object
__ixp43x_proc_info:
.long 0x69054040
.long 0xfffffff0
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_ixp43x_name
.long xscale_processor_functions
.long v4wbi_tlb_fns
.long xscale_mc_user_fns
.long xscale_cache_fns
.size __ixp43x_proc_info, . - __ixp43x_proc_info
.type __ixp46x_proc_info, #object
__ixp46x_proc_info:
.long 0x69054200

31
include/asm-arm/arch-ixp4xx/cpu.h Normal file
View file

@ -0,0 +1,31 @@
/*
* include/asm-arm/arch-ixp4xx/cpu.h
*
* IXP4XX cpu type detection
*
* Copyright (C) 2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ASM_ARCH_CPU_H__
#define __ASM_ARCH_CPU_H__
extern unsigned int processor_id;
/* Processor id value in CP15 Register 0 */
#define IXP425_PROCESSOR_ID_VALUE 0x690541c0
#define IXP435_PROCESSOR_ID_VALUE 0x69054040
#define IXP465_PROCESSOR_ID_VALUE 0x69054200
#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0
#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
IXP425_PROCESSOR_ID_VALUE)
#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
IXP435_PROCESSOR_ID_VALUE)
#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
IXP465_PROCESSOR_ID_VALUE)
#endif /* _ASM_ARCH_CPU_H */

57
include/asm-arm/arch-ixp4xx/dsmg600.h Normal file
View file

@ -0,0 +1,57 @@
/*
* DSM-G600 platform specific definitions
*
* Copyright (C) 2006 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* based on ixdp425.h:
* Copyright 2004 (C) MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H__
#error "Do not include this directly, instead #include <asm/hardware.h>"
#endif
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
/*
* DSMG600 PCI IRQs
*/
#define DSMG600_PCI_MAX_DEV 4
#define DSMG600_PCI_IRQ_LINES 3
/* PCI controller GPIO to IRQ pin mappings */
#define DSMG600_PCI_INTA_PIN 11
#define DSMG600_PCI_INTB_PIN 10
#define DSMG600_PCI_INTC_PIN 9
#define DSMG600_PCI_INTD_PIN 8
#define DSMG600_PCI_INTE_PIN 7
#define DSMG600_PCI_INTF_PIN 6
/* DSM-G600 Timer Setting */
#define DSMG600_FREQ 66000000
/* Buttons */
#define DSMG600_PB_GPIO 15 /* power button */
#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
#define DSMG600_RB_GPIO 3 /* reset button */
#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
#define DSMG600_PO_GPIO 2 /* power off */
/* LEDs */
#define DSMG600_LED_PWR_GPIO 0
#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
#define DSMG600_LED_WLAN_GPIO 14
#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)

4
include/asm-arm/arch-ixp4xx/entry-macro.S
View file

@ -31,9 +31,9 @@
1001:
/*
* IXP465 has an upper IRQ status register
* IXP465/IXP435 has an upper IRQ status register
*/
#if defined(CONFIG_CPU_IXP46X)
#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
ldr \irqstat, [\irqstat] @ get upper interrupts
mov \irqnr, #63

73
include/asm-arm/arch-ixp4xx/gpio.h Normal file
View file

@ -0,0 +1,73 @@
/*
* linux/include/asm-arm/arch-ixp4xx/gpio.h
*
* IXP4XX GPIO wrappers for arch-neutral GPIO calls
*
* Written by Milan Svoboda <msvoboda@ra.rockwell.com>
* Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __ASM_ARCH_IXP4XX_GPIO_H
#define __ASM_ARCH_IXP4XX_GPIO_H
#include <asm/hardware.h>
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
}
static inline void gpio_free(unsigned gpio)
{
return;
}
static inline int gpio_direction_input(unsigned gpio)
{
gpio_line_config(gpio, IXP4XX_GPIO_IN);
return 0;
}
static inline int gpio_direction_output(unsigned gpio, int level)
{
gpio_line_set(gpio, level);
gpio_line_config(gpio, IXP4XX_GPIO_OUT);
return 0;
}
static inline int gpio_get_value(unsigned gpio)
{
int value;
gpio_line_get(gpio, &value);
return value;
}
static inline void gpio_set_value(unsigned gpio, int value)
{
gpio_line_set(gpio, value);
}
#include <asm-generic/gpio.h> /* cansleep wrappers */
extern int gpio_to_irq(int gpio);
extern int irq_to_gpio(int gpio);
#endif

12
include/asm-arm/arch-ixp4xx/hardware.h
View file

@ -17,8 +17,8 @@
#ifndef __ASM_ARCH_HARDWARE_H__
#define __ASM_ARCH_HARDWARE_H__
#define PCIBIOS_MIN_IO 0x00001000
#define PCIBIOS_MIN_MEM 0x48000000
#define PCIBIOS_MIN_IO 0x00001000
#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
/*
* We override the standard dma-mask routines for bouncing.
@ -27,11 +27,8 @@
#define pcibios_assign_all_busses() 1
#if defined(CONFIG_CPU_IXP46X) && !defined(__ASSEMBLY__)
extern unsigned int processor_id;
#define cpu_is_ixp465() ((processor_id & 0xffffffc0) == 0x69054200)
#else
#define cpu_is_ixp465() (0)
#ifndef __ASSEMBLER__
#include <asm/arch/cpu.h>
#endif
/* Register locations and bits */
@ -47,5 +44,6 @@ extern unsigned int processor_id;
#include "prpmc1100.h"
#include "nslu2.h"
#include "nas100d.h"
#include "dsmg600.h"
#endif /* _ASM_ARCH_HARDWARE_H */

2
include/asm-arm/arch-ixp4xx/io.h
View file

@ -61,7 +61,7 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
static inline void __iomem *
__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
{
if((addr < 0x48000000) || (addr > 0x4fffffff))
if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
return __arm_ioremap(addr, size, mtype);
return (void *)addr;

16
include/asm-arm/arch-ixp4xx/irqs.h
View file

@ -62,10 +62,10 @@
/*
* Only first 32 sources are valid if running on IXP42x systems
*/
#ifndef CONFIG_CPU_IXP46X
#define NR_IRQS 32
#else
#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
#define NR_IRQS 64
#else
#define NR_IRQS 32
#endif
#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
@ -118,4 +118,14 @@
#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
/*
* D-Link DSM-G600 RevA board IRQs
*/
#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11
#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10
#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9
#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8
#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
#endif

15
include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
View file

@ -607,19 +607,4 @@
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
#ifndef __ASSEMBLY__
static inline int cpu_is_ixp46x(void)
{
#ifdef CONFIG_CPU_IXP46X
unsigned int processor_id;
asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);
if ((processor_id & 0xffffff00) == 0x69054200)
return 1;
#endif
return 0;
}
#endif
#endif