Samsung Exynos DT updates for v3.12
- update codec, pmic, usb hub for Arndale - add exynos4412-trats 2 board dt - update camera, spi, sensor for Trats2 - update fimc, sensor for Trats - add support tmu for exynos5440 - add support g2d for exynos5250 - correct camera pinctrl for exynos4x12 - add support camera subsystem for exynos4 - add support basic pm domain, fimd, dp for exynos5420 - add support secure-firmware for OrigenQuad - update mfc and add support mfc for exynos5420 - add usb host node for exynos4 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSETfIAAoJEA0Cl+kVi2xqDigP/Awx/R1A+TGl+/wpkGybuTZJ ax6XCVcMNe5HpAWIlwrc5AFmpRsekTx/HmO/XqtjiexnN9d6GyPtK3vNAqPDowgZ wzC8iM6quRdEo/dFBuYgmomGZr/oE7Cv/GYTxmO3hjN0L7zU98fFKBNsn1D19086 WTSYluWG12BA2aN5Ppxkyie6VNXIfHKt4eYM5K+mjjhTZ97e5Oem6xOta+0V5JL6 vQyWfhhReLF2UfXxmYa53JoXCtJOOBDq/VMsfDj1UfAx3oEiYAybDeYj+gwckhE+ PKu4qeHiEmh70XNlXG0/STylOdRDifw8ktZJ6bZ1zgcVSRnBKJ8hNpK77MYoVAFx DK+zREyQaztrBF/07gGfe6mDb0fIVGujvzfqX/5X1sJjiNvv0k/e7ptJBAmzlhhB 8pPG2X+Hs7XVPQ2XczcV9fjeUnaqcKfj1QKRsSNzFYg7Tu42CJ9wMDE93O0UCCxR r8X/0bfr+7ZxTr6MumfFCwgqv+G+Eg/emVXPVLCR0niw7owFuaFlGg8XR4VibDRC 8kQe2SOVeiq5LxVpjrZ22hujNOlw4Z6eHxu0RuHvWfhWSP9Jj2edDQVx9wzjaCJ9 XxZjW+ZUJjl09tYHmoDXdtvDCF5cmoqmXT33VNIzXHXP2lLCwMAn2TOivrj6L7ZH stekwdnMYak2Cit9wIqJ =VMxb -----END PGP SIGNATURE----- Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Samsung Exynos DT updates for v3.12 - update codec, pmic, usb hub for Arndale - add exynos4412-trats 2 board dt - update camera, spi, sensor for Trats2 - update fimc, sensor for Trats - add support tmu for exynos5440 - add support g2d for exynos5250 - correct camera pinctrl for exynos4x12 - add support camera subsystem for exynos4 - add support basic pm domain, fimd, dp for exynos5420 - add support secure-firmware for OrigenQuad - update mfc and add support mfc for exynos5420 - add usb host node for exynos4 * tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (38 commits) ARM: dts: Add USB host node for Exynos4 ARM: dts: add audio clock controller for exynos5420 ARM: dts: Correct the /include entry on exynos5420 dtsi file ARM: dts: Add MFC node for exynos 5420 ARM: dts: Update 5250 MFC node ARM: dts: Remove unsused MFC clock from exynos4 ARM: dts: Update clocks entry in MFC binding documentation ARM: dts: Hook up internal PHY on Arndale ARM: dts: Enable USB hub on Arndale ARM: dts: Add secure-firmware boot support for OrigenQaud board ARM: dts: Add pin state information for DP HPD support to Exynos5420 ARM: dts: Add DP controller DT node to exynos5420 SoC ARM: dts: Update DP controller DT Node for Exynos5 based SoCs ARM: dts: Add FIMD DT node to exynos5420 DTS files ARM: dts: Add basic PM domains for EXYNOS5420 ARM: dts: Update FIMD DT node for Exynos5 SoCs ARM: dts: Move display-timing information inside FIMD DT node for exynos5250 ARM: dts: Add S5K5BA sensor regulator definitions for Trats board ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes ARM: dts: Add FIMC nodes for Exynos4210 Trats board ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
This commit is contained in:
Kevin Hilman
commit
5f5cc5cd7c
|
|
@ -15,9 +15,9 @@ Required properties:
|
|||
mapped region.
|
||||
|
||||
- interrupts : MFC interrupt number to the CPU.
|
||||
- clocks : from common clock binding: handle to mfc clocks.
|
||||
- clock-names : from common clock binding: must contain "sclk_mfc" and "mfc",
|
||||
corresponding to entries in the clocks property.
|
||||
- clocks : from common clock binding: handle to mfc clock.
|
||||
- clock-names : from common clock binding: must contain "mfc",
|
||||
corresponding to entry in the clocks property.
|
||||
|
||||
- samsung,mfc-r : Base address of the first memory bank used by MFC
|
||||
for DMA contiguous memory allocation and its size.
|
||||
|
|
@ -37,8 +37,8 @@ mfc: codec@13400000 {
|
|||
reg = <0x13400000 0x10000>;
|
||||
interrupts = <0 94 0>;
|
||||
samsung,power-domain = <&pd_mfc>;
|
||||
clocks = <&clock 170>, <&clock 273>;
|
||||
clock-names = "sclk_mfc", "mfc";
|
||||
clocks = <&clock 273>;
|
||||
clock-names = "mfc";
|
||||
};
|
||||
|
||||
Board specific DT entry:
|
||||
|
|
|
|||
|
|
@ -53,13 +53,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
|
|||
exynos4210-trats.dtb \
|
||||
exynos4210-universal_c210.dtb \
|
||||
exynos4412-odroidx.dtb \
|
||||
exynos4412-smdk4412.dtb \
|
||||
exynos4412-origen.dtb \
|
||||
exynos4412-smdk4412.dtb \
|
||||
exynos4412-trats2.dtb \
|
||||
exynos5250-arndale.dtb \
|
||||
exynos5440-sd5v1.dtb \
|
||||
exynos5250-smdk5250.dtb \
|
||||
exynos5250-snow.dtb \
|
||||
exynos5420-smdk5420.dtb \
|
||||
exynos5440-sd5v1.dtb \
|
||||
exynos5440-ssdk5440.dtb
|
||||
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
|
||||
ecx-2000.dtb
|
||||
|
|
|
|||
|
|
@ -36,6 +36,12 @@
|
|||
i2c5 = &i2c_5;
|
||||
i2c6 = &i2c_6;
|
||||
i2c7 = &i2c_7;
|
||||
csis0 = &csis_0;
|
||||
csis1 = &csis_1;
|
||||
fimc0 = &fimc_0;
|
||||
fimc1 = &fimc_1;
|
||||
fimc2 = &fimc_2;
|
||||
fimc3 = &fimc_3;
|
||||
};
|
||||
|
||||
chipid@10000000 {
|
||||
|
|
@ -92,6 +98,88 @@
|
|||
reg = <0x10010000 0x400>;
|
||||
};
|
||||
|
||||
camera {
|
||||
compatible = "samsung,fimc", "simple-bus";
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
clock_cam: clock-controller {
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11800000 0x1000>;
|
||||
interrupts = <0 84 0>;
|
||||
clocks = <&clock 256>, <&clock 128>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimc_1: fimc@11810000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11810000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
clocks = <&clock 257>, <&clock 129>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimc_2: fimc@11820000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11820000 0x1000>;
|
||||
interrupts = <0 86 0>;
|
||||
clocks = <&clock 258>, <&clock 130>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimc_3: fimc@11830000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11830000 0x1000>;
|
||||
interrupts = <0 87 0>;
|
||||
clocks = <&clock 259>, <&clock 131>;
|
||||
clock-names = "fimc", "sclk_fimc";
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
samsung,sysreg = <&sys_reg>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
csis_0: csis@11880000 {
|
||||
compatible = "samsung,exynos4210-csis";
|
||||
reg = <0x11880000 0x4000>;
|
||||
interrupts = <0 78 0>;
|
||||
clocks = <&clock 260>, <&clock 134>;
|
||||
clock-names = "csis", "sclk_csis";
|
||||
bus-width = <4>;
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
csis_1: csis@11890000 {
|
||||
compatible = "samsung,exynos4210-csis";
|
||||
reg = <0x11890000 0x4000>;
|
||||
interrupts = <0 80 0>;
|
||||
clocks = <&clock 261>, <&clock 135>;
|
||||
clock-names = "csis", "sclk_csis";
|
||||
bus-width = <2>;
|
||||
samsung,power-domain = <&pd_cam>;
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@10060000 {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x10060000 0x100>;
|
||||
|
|
@ -155,13 +243,31 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci@12580000 {
|
||||
compatible = "samsung,exynos4210-ehci";
|
||||
reg = <0x12580000 0x100>;
|
||||
interrupts = <0 70 0>;
|
||||
clocks = <&clock 304>;
|
||||
clock-names = "usbhost";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci@12590000 {
|
||||
compatible = "samsung,exynos4210-ohci";
|
||||
reg = <0x12590000 0x100>;
|
||||
interrupts = <0 70 0>;
|
||||
clocks = <&clock 304>;
|
||||
clock-names = "usbhost";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mfc: codec@13400000 {
|
||||
compatible = "samsung,mfc-v5";
|
||||
reg = <0x13400000 0x10000>;
|
||||
interrupts = <0 94 0>;
|
||||
samsung,power-domain = <&pd_mfc>;
|
||||
clocks = <&clock 170>, <&clock 273>;
|
||||
clock-names = "sclk_mfc", "mfc";
|
||||
clocks = <&clock 273>;
|
||||
clock-names = "mfc";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -297,8 +403,8 @@
|
|||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13920000 0x100>;
|
||||
interrupts = <0 66 0>;
|
||||
tx-dma-channel = <&pdma0 7>; /* preliminary */
|
||||
rx-dma-channel = <&pdma0 6>; /* preliminary */
|
||||
dmas = <&pdma0 7>, <&pdma0 6>;
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 327>, <&clock 159>;
|
||||
|
|
@ -312,8 +418,8 @@
|
|||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13930000 0x100>;
|
||||
interrupts = <0 67 0>;
|
||||
tx-dma-channel = <&pdma1 7>; /* preliminary */
|
||||
rx-dma-channel = <&pdma1 6>; /* preliminary */
|
||||
dmas = <&pdma1 7>, <&pdma1 6>;
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 328>, <&clock 160>;
|
||||
|
|
@ -327,8 +433,8 @@
|
|||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13940000 0x100>;
|
||||
interrupts = <0 68 0>;
|
||||
tx-dma-channel = <&pdma0 9>; /* preliminary */
|
||||
rx-dma-channel = <&pdma0 8>; /* preliminary */
|
||||
dmas = <&pdma0 9>, <&pdma0 8>;
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clock 329>, <&clock 161>;
|
||||
|
|
|
|||
|
|
@ -797,6 +797,29 @@
|
|||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
cam_port_a_io: cam-port-a-io {
|
||||
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
|
||||
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
|
||||
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
cam_port_a_clk_active: cam-port-a-clk-active {
|
||||
samsung,pins = "gpj1-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
cam_port_a_clk_idle: cam-port-a-clk-idle {
|
||||
samsung,pins = "gpj1-3";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@03860000 {
|
||||
|
|
|
|||
|
|
@ -30,13 +30,62 @@
|
|||
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
|
||||
};
|
||||
|
||||
vemmc_reg: voltage-regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpk0 2 0>;
|
||||
enable-active-high;
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
vemmc_reg: regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpk0 2 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
tsp_reg: regulator-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "TSP_FIXED_VOLTAGES";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpl0 3 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
cam_af_28v_reg: regulator-2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "8M_AF_2.8V_EN";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpk1 1 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
cam_io_en_reg: regulator-3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM_IO_EN";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpe2 1 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
cam_io_12v_reg: regulator-4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "8M_1.2V_EN";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
gpio = <&gpe2 5 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vt_core_15v_reg: regulator-5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VT_CORE_1.5V";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
gpio = <&gpe2 2 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
sdhci_emmc: sdhci@12510000 {
|
||||
|
|
@ -97,15 +146,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
tsp_reg: voltage-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "TSP_FIXED_VOLTAGES";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpl0 3 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
i2c@13890000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
|
|
@ -218,6 +258,12 @@
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
vtcam_reg: LDO12 {
|
||||
regulator-name = "VT_CAM_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcclcd_reg: LDO13 {
|
||||
regulator-name = "VCC_3.3V_LCD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
@ -301,4 +347,26 @@
|
|||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
camera {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <>;
|
||||
status = "okay";
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_1: fimc@11810000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_2: fimc@11820000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_3: fimc@11830000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -125,4 +125,34 @@
|
|||
clock-names = "sclk_fimg2d", "fimg2d";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
camera {
|
||||
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
|
||||
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
samsung,pix-limits = <4224 8192 1920 4224>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,cam-if;
|
||||
};
|
||||
|
||||
fimc_1: fimc@11810000 {
|
||||
samsung,pix-limits = <4224 8192 1920 4224>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,cam-if;
|
||||
};
|
||||
|
||||
fimc_2: fimc@11820000 {
|
||||
samsung,pix-limits = <4224 8192 1920 4224>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,lcd-wb;
|
||||
};
|
||||
|
||||
fimc_3: fimc@11830000 {
|
||||
samsung,pix-limits = <1920 8192 1366 1920>;
|
||||
samsung,rotators = <0>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,lcd-wb;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -27,6 +27,11 @@
|
|||
bootargs ="console=ttySAC2,115200";
|
||||
};
|
||||
|
||||
firmware@0203F000 {
|
||||
compatible = "samsung,secure-firmware";
|
||||
reg = <0x0203F000 0x1000>;
|
||||
};
|
||||
|
||||
mmc_reg: voltage-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
|
|
|
|||
579
arch/arm/boot/dts/exynos4412-trats2.dts
Normal file
579
arch/arm/boot/dts/exynos4412-trats2.dts
Normal file
|
|
@ -0,0 +1,579 @@
|
|||
/*
|
||||
* Samsung's Exynos4412 based Trats 2 board device tree source
|
||||
*
|
||||
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Device tree source file for Samsung's Trats 2 board which is based on
|
||||
* Samsung's Exynos4412 SoC.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "exynos4412.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Samsung Trats 2 based on Exynos4412";
|
||||
compatible = "samsung,trats2", "samsung,exynos4412";
|
||||
|
||||
aliases {
|
||||
i2c8 = &i2c_ak8975;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x40000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
|
||||
};
|
||||
|
||||
firmware@0204F000 {
|
||||
compatible = "samsung,secure-firmware";
|
||||
reg = <0x0204F000 0x1000>;
|
||||
};
|
||||
|
||||
fixed-rate-clocks {
|
||||
xxti {
|
||||
compatible = "samsung,clock-xxti", "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
xusbxti {
|
||||
compatible = "samsung,clock-xusbxti", "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vemmc_reg: regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpk0 2 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
cam_io_reg: voltage-regulator-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM_SENSOR_A";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpm0 2 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
/* More to come */
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key-down {
|
||||
interrupt-parent = <&gpj1>;
|
||||
interrupts = <2 0>;
|
||||
gpios = <&gpj1 2 1>;
|
||||
linux,code = <114>;
|
||||
label = "volume down";
|
||||
debounce-interval = <10>;
|
||||
};
|
||||
|
||||
key-up {
|
||||
interrupt-parent = <&gpj1>;
|
||||
interrupts = <1 0>;
|
||||
gpios = <&gpj1 1 1>;
|
||||
linux,code = <115>;
|
||||
label = "volume up";
|
||||
debounce-interval = <10>;
|
||||
};
|
||||
|
||||
key-power {
|
||||
interrupt-parent = <&gpx2>;
|
||||
interrupts = <7 0>;
|
||||
gpios = <&gpx2 7 1>;
|
||||
linux,code = <116>;
|
||||
label = "power";
|
||||
debounce-interval = <10>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@13890000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
samsung,i2c-max-bus-freq = <400000>;
|
||||
pinctrl-0 = <&i2c3_bus>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
mms114-touchscreen@48 {
|
||||
compatible = "melfas,mms114";
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&gpm2>;
|
||||
interrupts = <3 2>;
|
||||
x-size = <720>;
|
||||
y-size = <1280>;
|
||||
avdd-supply = <&ldo23_reg>;
|
||||
vdd-supply = <&ldo24_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@138D0000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
samsung,i2c-max-bus-freq = <100000>;
|
||||
pinctrl-0 = <&i2c7_bus>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
max77686_pmic@09 {
|
||||
compatible = "maxim,max77686";
|
||||
interrupt-parent = <&gpx0>;
|
||||
interrupts = <7 0>;
|
||||
reg = <0x09>;
|
||||
|
||||
voltage-regulators {
|
||||
ldo1_reg: ldo1 {
|
||||
regulator-compatible = "LDO1";
|
||||
regulator-name = "VALIVE_1.0V_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
regulator-compatible = "LDO2";
|
||||
regulator-name = "VM1M2_1.2V_AP";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo3_reg: ldo3 {
|
||||
regulator-compatible = "LDO3";
|
||||
regulator-name = "VCC_1.8V_AP";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo4_reg: ldo4 {
|
||||
regulator-compatible = "LDO4";
|
||||
regulator-name = "VCC_2.8V_AP";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo5_reg: ldo5 {
|
||||
regulator-compatible = "LDO5";
|
||||
regulator-name = "VCC_1.8V_IO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo6_reg: ldo6 {
|
||||
regulator-compatible = "LDO6";
|
||||
regulator-name = "VMPLL_1.0V_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo7_reg: ldo7 {
|
||||
regulator-compatible = "LDO7";
|
||||
regulator-name = "VPLL_1.0V_AP";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-on;
|
||||
};
|
||||
|
||||
ldo8_reg: ldo8 {
|
||||
regulator-compatible = "LDO8";
|
||||
regulator-name = "VMIPI_1.0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo9_reg: ldo9 {
|
||||
regulator-compatible = "LDO9";
|
||||
regulator-name = "CAM_ISP_MIPI_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo10_reg: ldo10 {
|
||||
regulator-compatible = "LDO10";
|
||||
regulator-name = "VMIPI_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo11_reg: ldo11 {
|
||||
regulator-compatible = "LDO11";
|
||||
regulator-name = "VABB1_1.95V";
|
||||
regulator-min-microvolt = <1950000>;
|
||||
regulator-max-microvolt = <1950000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo12_reg: ldo12 {
|
||||
regulator-compatible = "LDO12";
|
||||
regulator-name = "VUOTG_3.0V";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo13_reg: ldo13 {
|
||||
regulator-compatible = "LDO13";
|
||||
regulator-name = "NFC_AVDD_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo14_reg: ldo14 {
|
||||
regulator-compatible = "LDO14";
|
||||
regulator-name = "VABB2_1.95V";
|
||||
regulator-min-microvolt = <1950000>;
|
||||
regulator-max-microvolt = <1950000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo15_reg: ldo15 {
|
||||
regulator-compatible = "LDO15";
|
||||
regulator-name = "VHSIC_1.0V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo16_reg: ldo16 {
|
||||
regulator-compatible = "LDO16";
|
||||
regulator-name = "VHSIC_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo17_reg: ldo17 {
|
||||
regulator-compatible = "LDO17";
|
||||
regulator-name = "CAM_SENSOR_CORE_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo18_reg: ldo18 {
|
||||
regulator-compatible = "LDO18";
|
||||
regulator-name = "CAM_ISP_SEN_IO_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo19_reg: ldo19 {
|
||||
regulator-compatible = "LDO19";
|
||||
regulator-name = "VT_CAM_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo20_reg: ldo20 {
|
||||
regulator-compatible = "LDO20";
|
||||
regulator-name = "VDDQ_PRE_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo21_reg: ldo21 {
|
||||
regulator-compatible = "LDO21";
|
||||
regulator-name = "VTF_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo22_reg: ldo22 {
|
||||
regulator-compatible = "LDO22";
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
ldo23_reg: ldo23 {
|
||||
regulator-compatible = "LDO23";
|
||||
regulator-name = "TSP_AVDD_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo24_reg: ldo24 {
|
||||
regulator-compatible = "LDO24";
|
||||
regulator-name = "TSP_VDD_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo25_reg: ldo25 {
|
||||
regulator-compatible = "LDO25";
|
||||
regulator-name = "LCD_VCC_3.3V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
ldo26_reg: ldo26 {
|
||||
regulator-compatible = "LDO26";
|
||||
regulator-name = "MOTOR_VCC_3.0V";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-mem-idle;
|
||||
};
|
||||
|
||||
buck1_reg: buck1 {
|
||||
regulator-compatible = "BUCK1";
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
buck2_reg: buck2 {
|
||||
regulator-compatible = "BUCK2";
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
buck3_reg: buck3 {
|
||||
regulator-compatible = "BUCK3";
|
||||
regulator-name = "vdd_int";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
buck4_reg: buck4 {
|
||||
regulator-compatible = "BUCK4";
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
buck5_reg: buck5 {
|
||||
regulator-compatible = "BUCK5";
|
||||
regulator-name = "VMEM_1.2V_AP";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck6_reg: buck6 {
|
||||
regulator-compatible = "BUCK6";
|
||||
regulator-name = "VCC_SUB_1.35V";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck7_reg: buck7 {
|
||||
regulator-compatible = "BUCK7";
|
||||
regulator-name = "VCC_SUB_2.0V";
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck8_reg: buck8 {
|
||||
regulator-compatible = "BUCK8";
|
||||
regulator-name = "VMEM_VDDF_3.0V";
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-always-on;
|
||||
regulator-mem-off;
|
||||
};
|
||||
|
||||
buck9_reg: buck9 {
|
||||
regulator-compatible = "BUCK9";
|
||||
regulator-name = "CAM_ISP_CORE_1.2V";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-mem-off;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@12510000 {
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
|
||||
pinctrl-names = "default";
|
||||
vmmc-supply = <&vemmc_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13810000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13820000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13830000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c_ak8975: i2c-gpio-0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&gpy2 4 0>, <&gpy2 5 0>;
|
||||
i2c-gpio,delay-us = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ak8975@0c {
|
||||
compatible = "ak,ak8975";
|
||||
reg = <0x0c>;
|
||||
gpios = <&gpj0 7 0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi_1: spi@13930000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_bus>;
|
||||
status = "okay";
|
||||
|
||||
s5c73m3_spi: s5c73m3 {
|
||||
compatible = "samsung,s5c73m3";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
controller-data {
|
||||
cs-gpio = <&gpb 5 0>;
|
||||
samsung,spi-feedback-delay = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
camera {
|
||||
pinctrl-0 = <&cam_port_b_clk_active>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_1: fimc@11810000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_2: fimc@11820000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_3: fimc@11830000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
csis_1: csis@11890000 {
|
||||
vddcore-supply = <&ldo8_reg>;
|
||||
vddio-supply = <&ldo10_reg>;
|
||||
clock-frequency = <160000000>;
|
||||
status = "okay";
|
||||
|
||||
/* Camera D (4) MIPI CSI-2 (CSIS1) */
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
csis1_ep: endpoint {
|
||||
remote-endpoint = <&is_s5k6a3_ep>;
|
||||
data-lanes = <1>;
|
||||
samsung,csis-hs-settle = <18>;
|
||||
samsung,csis-wclk;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
fimc_lite_0: fimc-lite@12390000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc_lite_1: fimc-lite@123A0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimc-is@12000000 {
|
||||
pinctrl-0 = <&fimc_is_uart>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
i2c1_isp: i2c-isp@12140000 {
|
||||
pinctrl-0 = <&fimc_is_i2c1>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
s5k6a3@10 {
|
||||
compatible = "samsung,s5k6a3";
|
||||
reg = <0x10>;
|
||||
svdda-supply = <&cam_io_reg>;
|
||||
svddio-supply = <&ldo19_reg>;
|
||||
clock-frequency = <24000000>;
|
||||
/* CAM_B_CLKOUT */
|
||||
clocks = <&clock_cam 1>;
|
||||
clock-names = "mclk";
|
||||
samsung,camclk-out = <1>;
|
||||
gpios = <&gpm1 6 0>;
|
||||
|
||||
port {
|
||||
is_s5k6a3_ep: endpoint {
|
||||
remote-endpoint = <&csis1_ep>;
|
||||
data-lanes = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -401,13 +401,26 @@
|
|||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
cam_port_a: cam-port-a {
|
||||
cam_port_a_io: cam-port-a-io {
|
||||
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
|
||||
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
|
||||
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
|
||||
"gpj1-4";
|
||||
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
cam_port_a_clk_active: cam-port-a-clk-active {
|
||||
samsung,pins = "gpj1-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
cam_port_a_clk_idle: cam-port-a-clk-idle {
|
||||
samsung,pins = "gpj1-3";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -778,16 +791,29 @@
|
|||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
cam_port_b: cam-port-b {
|
||||
cam_port_b_io: cam-port-b-io {
|
||||
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
|
||||
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
|
||||
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
|
||||
"gpm2-2";
|
||||
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
cam_port_b_clk_active: cam-port-b-clk-active {
|
||||
samsung,pins = "gpm2-2";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
cam_port_b_clk_idle: cam-port-b-clk-idle {
|
||||
samsung,pins = "gpm2-2";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
eint0: ext-int0 {
|
||||
samsung,pins = "gpx0-0";
|
||||
samsung,pin-function = <0xf>;
|
||||
|
|
@ -822,6 +848,27 @@
|
|||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_i2c0: fimc-is-i2c0 {
|
||||
samsung,pins = "gpm4-0", "gpm4-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_i2c1: fimc-is-i2c1 {
|
||||
samsung,pins = "gpm4-2", "gpm4-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_uart: fimc-is-uart {
|
||||
samsung,pins = "gpm3-5", "gpm3-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@03860000 {
|
||||
|
|
|
|||
|
|
@ -26,6 +26,13 @@
|
|||
pinctrl1 = &pinctrl_1;
|
||||
pinctrl2 = &pinctrl_2;
|
||||
pinctrl3 = &pinctrl_3;
|
||||
fimc-lite0 = &fimc_lite_0;
|
||||
fimc-lite1 = &fimc_lite_1;
|
||||
};
|
||||
|
||||
pd_isp: isp-power-domain@10023CA0 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023CA0 0x20>;
|
||||
};
|
||||
|
||||
clock: clock-controller@0x10030000 {
|
||||
|
|
@ -73,4 +80,100 @@
|
|||
clock-names = "sclk_fimg2d", "fimg2d";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
camera {
|
||||
clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
|
||||
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
compatible = "samsung,exynos4212-fimc";
|
||||
samsung,pix-limits = <4224 8192 1920 4224>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,isp-wb;
|
||||
samsung,cam-if;
|
||||
};
|
||||
|
||||
fimc_1: fimc@11810000 {
|
||||
compatible = "samsung,exynos4212-fimc";
|
||||
samsung,pix-limits = <4224 8192 1920 4224>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,isp-wb;
|
||||
samsung,cam-if;
|
||||
};
|
||||
|
||||
fimc_2: fimc@11820000 {
|
||||
compatible = "samsung,exynos4212-fimc";
|
||||
samsung,pix-limits = <4224 8192 1920 4224>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,isp-wb;
|
||||
samsung,lcd-wb;
|
||||
samsung,cam-if;
|
||||
};
|
||||
|
||||
fimc_3: fimc@11830000 {
|
||||
compatible = "samsung,exynos4212-fimc";
|
||||
samsung,pix-limits = <1920 8192 1366 1920>;
|
||||
samsung,rotators = <0>;
|
||||
samsung,mainscaler-ext;
|
||||
samsung,isp-wb;
|
||||
samsung,lcd-wb;
|
||||
};
|
||||
|
||||
fimc_lite_0: fimc-lite@12390000 {
|
||||
compatible = "samsung,exynos4212-fimc-lite";
|
||||
reg = <0x12390000 0x1000>;
|
||||
interrupts = <0 105 0>;
|
||||
samsung,power-domain = <&pd_isp>;
|
||||
clocks = <&clock 353>;
|
||||
clock-names = "flite";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimc_lite_1: fimc-lite@123A0000 {
|
||||
compatible = "samsung,exynos4212-fimc-lite";
|
||||
reg = <0x123A0000 0x1000>;
|
||||
interrupts = <0 106 0>;
|
||||
samsung,power-domain = <&pd_isp>;
|
||||
clocks = <&clock 354>;
|
||||
clock-names = "flite";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimc_is: fimc-is@12000000 {
|
||||
compatible = "samsung,exynos4212-fimc-is", "simple-bus";
|
||||
reg = <0x12000000 0x260000>;
|
||||
interrupts = <0 90 0>, <0 95 0>;
|
||||
samsung,power-domain = <&pd_isp>;
|
||||
clocks = <&clock 353>, <&clock 354>, <&clock 355>,
|
||||
<&clock 356>, <&clock 17>, <&clock 357>,
|
||||
<&clock 358>, <&clock 359>, <&clock 360>,
|
||||
<&clock 450>,<&clock 451>, <&clock 452>,
|
||||
<&clock 453>, <&clock 176>, <&clock 13>,
|
||||
<&clock 454>, <&clock 395>, <&clock 455>;
|
||||
clock-names = "lite0", "lite1", "ppmuispx",
|
||||
"ppmuispmx", "mpll", "isp",
|
||||
"drc", "fd", "mcuisp",
|
||||
"ispdiv0", "ispdiv1", "mcuispdiv0",
|
||||
"mcuispdiv1", "uart", "aclk200",
|
||||
"div_aclk200", "aclk400mcuisp",
|
||||
"div_aclk400mcuisp";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
status = "disabled";
|
||||
|
||||
pmu {
|
||||
reg = <0x10020000 0x3000>;
|
||||
};
|
||||
|
||||
i2c1_isp: i2c-isp@12140000 {
|
||||
compatible = "samsung,exynos4212-i2c-isp";
|
||||
reg = <0x12140000 0x100>;
|
||||
clocks = <&clock 370>;
|
||||
clock-names = "i2c_isp";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -108,4 +108,23 @@
|
|||
interrupts = <0 42 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
compatible = "samsung,exynos5250-fimd";
|
||||
interrupt-parent = <&combiner>;
|
||||
reg = <0x14400000 0x40000>;
|
||||
interrupt-names = "fifo", "vsync", "lcd_sys";
|
||||
interrupts = <18 4>, <18 5>, <18 6>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
compatible = "samsung,exynos5-dp";
|
||||
reg = <0x145B0000 0x1000>;
|
||||
interrupts = <10 3>;
|
||||
interrupt-parent = <&combiner>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "exynos5250.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "Insignal Arndale evaluation board based on EXYNOS5250";
|
||||
|
|
@ -37,6 +38,28 @@
|
|||
s5m8767_pmic@66 {
|
||||
compatible = "samsung,s5m8767-pmic";
|
||||
reg = <0x66>;
|
||||
interrupt-parent = <&gpx3>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
vinb1-supply = <&main_dc_reg>;
|
||||
vinb2-supply = <&main_dc_reg>;
|
||||
vinb3-supply = <&main_dc_reg>;
|
||||
vinb4-supply = <&main_dc_reg>;
|
||||
vinb5-supply = <&main_dc_reg>;
|
||||
vinb6-supply = <&main_dc_reg>;
|
||||
vinb7-supply = <&main_dc_reg>;
|
||||
vinb8-supply = <&main_dc_reg>;
|
||||
vinb9-supply = <&main_dc_reg>;
|
||||
|
||||
vinl1-supply = <&buck7_reg>;
|
||||
vinl2-supply = <&buck7_reg>;
|
||||
vinl3-supply = <&buck7_reg>;
|
||||
vinl4-supply = <&main_dc_reg>;
|
||||
vinl5-supply = <&main_dc_reg>;
|
||||
vinl6-supply = <&main_dc_reg>;
|
||||
vinl7-supply = <&main_dc_reg>;
|
||||
vinl8-supply = <&buck8_reg>;
|
||||
vinl9-supply = <&buck8_reg>;
|
||||
|
||||
s5m8767,pmic-buck2-dvs-voltage = <1300000>;
|
||||
s5m8767,pmic-buck3-dvs-voltage = <1100000>;
|
||||
|
|
@ -276,6 +299,16 @@
|
|||
op_mode = <1>;
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "PVDD_BUCK7";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "PVDD_BUCK8";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck9_reg: BUCK9 {
|
||||
regulator-name = "VDD_33_OFF_EXT1";
|
||||
regulator-min-microvolt = <750000>;
|
||||
|
|
@ -295,7 +328,22 @@
|
|||
};
|
||||
|
||||
i2c@12C90000 {
|
||||
status = "disabled";
|
||||
wm1811a@1a {
|
||||
compatible = "wlf,wm1811";
|
||||
reg = <0x1a>;
|
||||
|
||||
AVDD2-supply = <&main_dc_reg>;
|
||||
CPVDD-supply = <&main_dc_reg>;
|
||||
DBVDD1-supply = <&main_dc_reg>;
|
||||
DBVDD2-supply = <&main_dc_reg>;
|
||||
DBVDD3-supply = <&main_dc_reg>;
|
||||
LDO1VDD-supply = <&main_dc_reg>;
|
||||
SPKVDD1-supply = <&main_dc_reg>;
|
||||
SPKVDD2-supply = <&main_dc_reg>;
|
||||
|
||||
wlf,ldo1ena = <&gpb0 0 0>;
|
||||
wlf,ldo2ena = <&gpb0 1 0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@12CA0000 {
|
||||
|
|
@ -429,18 +477,29 @@
|
|||
vdd-supply = <&ldo8_reg>;
|
||||
};
|
||||
|
||||
mmc_reg: voltage-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDD_33ON_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpx1 1 1>;
|
||||
enable-active-high;
|
||||
};
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_hdmi_en: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hdmi-en";
|
||||
main_dc_reg: fixedregulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "MAIN_DC";
|
||||
};
|
||||
|
||||
mmc_reg: voltage-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDD_33ON_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpx1 1 1>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_hdmi_en: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hdmi-en";
|
||||
};
|
||||
};
|
||||
|
||||
fixed-rate-clocks {
|
||||
|
|
@ -450,16 +509,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
dp-controller {
|
||||
dp-controller@145B0000 {
|
||||
samsung,color-space = <0>;
|
||||
samsung,dynamic-range = <0>;
|
||||
samsung,ycbcr-coeff = <0>;
|
||||
samsung,color-depth = <1>;
|
||||
samsung,link-rate = <0x0a>;
|
||||
samsung,lane-count = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimd: fimd@14400000 {
|
||||
status = "okay";
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing@0 {
|
||||
|
|
@ -480,4 +541,22 @@
|
|||
rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb_hub_bus {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
// SMSC USB3503 connected in hardware only mode as a PHY
|
||||
usb_hub: usb_hub {
|
||||
compatible = "smsc,usb3503a";
|
||||
|
||||
reset-gpios = <&gpx3 5 1>;
|
||||
connect-gpios = <&gpd1 7 1>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@12110000 {
|
||||
usb-phy = <&usb2_phy>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -250,7 +250,7 @@
|
|||
samsung,vbus-gpio = <&gpx2 6 0>;
|
||||
};
|
||||
|
||||
dp-controller {
|
||||
dp-controller@145B0000 {
|
||||
samsung,color-space = <0>;
|
||||
samsung,dynamic-range = <0>;
|
||||
samsung,ycbcr-coeff = <0>;
|
||||
|
|
@ -260,21 +260,25 @@
|
|||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dp_hpd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing@0 {
|
||||
/* 1280x800 */
|
||||
clock-frequency = <50000>;
|
||||
hactive = <1280>;
|
||||
vactive = <800>;
|
||||
hfront-porch = <4>;
|
||||
hback-porch = <4>;
|
||||
hsync-len = <4>;
|
||||
vback-porch = <4>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <4>;
|
||||
fimd@14400000 {
|
||||
status = "okay";
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing@0 {
|
||||
/* 1280x800 */
|
||||
clock-frequency = <50000>;
|
||||
hactive = <1280>;
|
||||
vactive = <800>;
|
||||
hfront-porch = <4>;
|
||||
hback-porch = <4>;
|
||||
hsync-len = <4>;
|
||||
vback-porch = <4>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -163,11 +163,21 @@
|
|||
clock-names = "watchdog";
|
||||
};
|
||||
|
||||
g2d@10850000 {
|
||||
compatible = "samsung,exynos5250-g2d";
|
||||
reg = <0x10850000 0x1000>;
|
||||
interrupts = <0 91 0>;
|
||||
clocks = <&clock 345>;
|
||||
clock-names = "fimg2d";
|
||||
};
|
||||
|
||||
codec@11000000 {
|
||||
compatible = "samsung,mfc-v6";
|
||||
reg = <0x11000000 0x10000>;
|
||||
interrupts = <0 96 0>;
|
||||
samsung,power-domain = <&pd_mfc>;
|
||||
clocks = <&clock 266>;
|
||||
clock-names = "mfc";
|
||||
};
|
||||
|
||||
rtc {
|
||||
|
|
@ -614,28 +624,20 @@
|
|||
interrupts = <0 94 0>;
|
||||
};
|
||||
|
||||
dp-controller {
|
||||
compatible = "samsung,exynos5-dp";
|
||||
reg = <0x145b0000 0x1000>;
|
||||
interrupts = <10 3>;
|
||||
interrupt-parent = <&combiner>;
|
||||
clocks = <&clock 342>;
|
||||
clock-names = "dp";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dptx-phy {
|
||||
reg = <0x10040720>;
|
||||
samsung,enable-mask = <1>;
|
||||
};
|
||||
dp_phy: video-phy@10040720 {
|
||||
compatible = "samsung,exynos5250-dp-video-phy";
|
||||
reg = <0x10040720 4>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
fimd {
|
||||
compatible = "samsung,exynos5250-fimd";
|
||||
interrupt-parent = <&combiner>;
|
||||
reg = <0x14400000 0x40000>;
|
||||
interrupt-names = "fifo", "vsync", "lcd_sys";
|
||||
interrupts = <18 4>, <18 5>, <18 6>;
|
||||
dp-controller@145B0000 {
|
||||
clocks = <&clock 342>;
|
||||
clock-names = "dp";
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
clocks = <&clock 133>, <&clock 339>;
|
||||
clock-names = "sclk_fimd", "fimd";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -59,6 +59,13 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
dp_hpd: dp_hpd {
|
||||
samsung,pins = "gpx0-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samaung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@13410000 {
|
||||
|
|
|
|||
|
|
@ -30,4 +30,35 @@
|
|||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dp_hpd>;
|
||||
samsung,color-space = <0>;
|
||||
samsung,dynamic-range = <0>;
|
||||
samsung,ycbcr-coeff = <0>;
|
||||
samsung,color-depth = <1>;
|
||||
samsung,link-rate = <0x0a>;
|
||||
samsung,lane-count = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
status = "okay";
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing@0 {
|
||||
clock-frequency = <50000>;
|
||||
hactive = <2560>;
|
||||
vactive = <1600>;
|
||||
hfront-porch = <48>;
|
||||
hback-porch = <80>;
|
||||
hsync-len = <32>;
|
||||
vback-porch = <16>;
|
||||
vfront-porch = <8>;
|
||||
vsync-len = <6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,7 +14,10 @@
|
|||
*/
|
||||
|
||||
#include "exynos5.dtsi"
|
||||
/include/ "exynos5420-pinctrl.dtsi"
|
||||
#include "exynos5420-pinctrl.dtsi"
|
||||
|
||||
#include <dt-bindings/clk/exynos-audss-clk.h>
|
||||
|
||||
/ {
|
||||
compatible = "samsung,exynos5420";
|
||||
|
||||
|
|
@ -65,6 +68,22 @@
|
|||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
clock_audss: audss-clock-controller@3810000 {
|
||||
compatible = "samsung,exynos5420-audss-clock";
|
||||
reg = <0x03810000 0x0C>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&clock 148>;
|
||||
clock-names = "sclk_audio";
|
||||
};
|
||||
|
||||
codec@11000000 {
|
||||
compatible = "samsung,mfc-v7";
|
||||
reg = <0x11000000 0x10000>;
|
||||
interrupts = <0 96 0>;
|
||||
clocks = <&clock 401>;
|
||||
clock-names = "mfc";
|
||||
};
|
||||
|
||||
mct@101C0000 {
|
||||
compatible = "samsung,exynos4210-mct";
|
||||
reg = <0x101C0000 0x800>;
|
||||
|
|
@ -90,6 +109,41 @@
|
|||
};
|
||||
};
|
||||
|
||||
gsc_pd: power-domain@10044000 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044000 0x20>;
|
||||
};
|
||||
|
||||
isp_pd: power-domain@10044020 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044020 0x20>;
|
||||
};
|
||||
|
||||
mfc_pd: power-domain@10044060 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044060 0x20>;
|
||||
};
|
||||
|
||||
disp_pd: power-domain@100440C0 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x100440C0 0x20>;
|
||||
};
|
||||
|
||||
mau_pd: power-domain@100440E0 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x100440E0 0x20>;
|
||||
};
|
||||
|
||||
g2d_pd: power-domain@10044100 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044100 0x20>;
|
||||
};
|
||||
|
||||
msc_pd: power-domain@10044120 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044120 0x20>;
|
||||
};
|
||||
|
||||
pinctrl_0: pinctrl@13400000 {
|
||||
compatible = "samsung,exynos5420-pinctrl";
|
||||
reg = <0x13400000 0x1000>;
|
||||
|
|
@ -145,4 +199,23 @@
|
|||
clocks = <&clock 260>, <&clock 131>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
dp_phy: video-phy@10040728 {
|
||||
compatible = "samsung,exynos5250-dp-video-phy";
|
||||
reg = <0x10040728 4>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
clocks = <&clock 412>;
|
||||
clock-names = "dp";
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
samsung,power-domain = <&disp_pd>;
|
||||
clocks = <&clock 147>, <&clock 421>;
|
||||
clock-names = "sclk_fimd", "fimd";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -18,6 +18,9 @@
|
|||
|
||||
aliases {
|
||||
spi0 = &spi_0;
|
||||
tmuctrl0 = &tmuctrl_0;
|
||||
tmuctrl1 = &tmuctrl_1;
|
||||
tmuctrl2 = &tmuctrl_2;
|
||||
};
|
||||
|
||||
clock: clock-controller@0x160000 {
|
||||
|
|
@ -207,6 +210,30 @@
|
|||
clock-names = "rtc";
|
||||
};
|
||||
|
||||
tmuctrl_0: tmuctrl@160118 {
|
||||
compatible = "samsung,exynos5440-tmu";
|
||||
reg = <0x160118 0x230>, <0x160368 0x10>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
tmuctrl_1: tmuctrl@16011C {
|
||||
compatible = "samsung,exynos5440-tmu";
|
||||
reg = <0x16011C 0x230>, <0x160368 0x10>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
tmuctrl_2: tmuctrl@160120 {
|
||||
compatible = "samsung,exynos5440-tmu";
|
||||
reg = <0x160120 0x230>, <0x160368 0x10>;
|
||||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clock-names = "tmu_apbif";
|
||||
};
|
||||
|
||||
sata@210000 {
|
||||
compatible = "snps,exynos5440-ahci";
|
||||
reg = <0x210000 0x10000>;
|
||||
|
|
|
|||
Loading…
Reference in a new issue