redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

can: Documentation: fix parameter name "sample-point"

Browse source 
This patch fixes the name of the parameter to configure the sample point used
in iproute2's ip command. The correct writing is "sample-point" not
"sample_point".

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
Robert Schwebel 2014-03-19 09:49:42 +01:00 committed by Marc Kleine-Budde
parent 636d0375e7
commit 5fb7639dee
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Documentation/networking/can.txt
View file

@ -1017,7 +1017,7 @@ solution for a couple of reasons:
in case of a bus-off condition after the specified delay time
in milliseconds. By default it's off.
"bitrate 125000 sample_point 0.875"
"bitrate 125000 sample-point 0.875"
Shows the real bit-rate in bits/sec and the sample-point in the
range 0.000..0.999. If the calculation of bit-timing parameters
is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the