gma500,cdv: Fix the brightness base

Some desktop environments carefully save and restore the brightness
settings from the previous boot.  Unfortunately they don't all check to
see if the range has changed.  The end result is that they restore a
brightness of 100/lots not 100/100.

As the old driver and the non-free GMA36xx driver both use 0-100 we thus
need to go back doing the same thing to avoid users getting a mysterious
black screen after boot.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Alan Cox 2012-07-16 17:54:03 +01:00 committed by Linus Torvalds
parent 166973e506
commit 6469195940

View file

@ -78,21 +78,6 @@ static int cdv_backlight_combination_mode(struct drm_device *dev)
return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE;
}
static int cdv_get_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (cdv_backlight_combination_mode(dev)) {
u8 lbpc;
val &= ~1;
pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
val *= lbpc;
}
return val;
}
static u32 cdv_get_max_backlight(struct drm_device *dev)
{
u32 max = REG_READ(BLC_PWM_CTL);
@ -110,6 +95,22 @@ static u32 cdv_get_max_backlight(struct drm_device *dev)
return max;
}
static int cdv_get_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (cdv_backlight_combination_mode(dev)) {
u8 lbpc;
val &= ~1;
pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
val *= lbpc;
}
return (val * 100)/cdv_get_max_backlight(dev);
}
static int cdv_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
@ -120,6 +121,9 @@ static int cdv_set_brightness(struct backlight_device *bd)
if (level < 1)
level = 1;
level *= cdv_get_max_backlight(dev);
level /= 100;
if (cdv_backlight_combination_mode(dev)) {
u32 max = cdv_get_max_backlight(dev);
u8 lbpc;
@ -157,7 +161,6 @@ static int cdv_backlight_init(struct drm_device *dev)
cdv_backlight_device->props.brightness =
cdv_get_brightness(cdv_backlight_device);
cdv_backlight_device->props.max_brightness = cdv_get_max_backlight(dev);
backlight_update_status(cdv_backlight_device);
dev_priv->backlight_device = cdv_backlight_device;
return 0;