hwmon/w83627ehf: Add support for the W83627DHG chip
Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
parent
37f54ee546
commit
657c93b10f
|
@ -2,26 +2,29 @@ Kernel driver w83627ehf
|
|||
=======================
|
||||
|
||||
Supported chips:
|
||||
* Winbond W83627EHF/EHG (ISA access ONLY)
|
||||
* Winbond W83627EHF/EHG/DHG (ISA access ONLY)
|
||||
Prefix: 'w83627ehf'
|
||||
Addresses scanned: ISA address retrieved from Super I/O registers
|
||||
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf
|
||||
Datasheet:
|
||||
http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf
|
||||
DHG datasheet confidential.
|
||||
|
||||
Authors:
|
||||
Jean Delvare <khali@linux-fr.org>
|
||||
Yuan Mu (Winbond)
|
||||
Rudolf Marek <r.marek@assembler.cz>
|
||||
David Hubbard <david.c.hubbard@gmail.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the Winbond W83627EHF and W83627EHG
|
||||
super I/O chips. We will refer to them collectively as Winbond chips.
|
||||
This driver implements support for the Winbond W83627EHF, W83627EHG, and
|
||||
W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
|
||||
|
||||
The chips implement three temperature sensors, five fan rotation
|
||||
speed sensors, ten analog voltage sensors, alarms with beep warnings (control
|
||||
unimplemented), and some automatic fan regulation strategies (plus manual
|
||||
fan control mode).
|
||||
speed sensors, ten analog voltage sensors (only nine for the 627DHG), alarms
|
||||
with beep warnings (control unimplemented), and some automatic fan regulation
|
||||
strategies (plus manual fan control mode).
|
||||
|
||||
Temperatures are measured in degrees Celsius and measurement resolution is 1
|
||||
degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
|
||||
|
@ -55,6 +58,9 @@ prog -> pwm4 (the programmable setting is not supported by the driver)
|
|||
/sys files
|
||||
----------
|
||||
|
||||
name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
|
||||
it is set to "w83627ehf" and for the W83627DHG it is set to "w83627dhg"
|
||||
|
||||
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
|
||||
0 (stop) to 255 (full)
|
||||
|
||||
|
@ -83,3 +89,37 @@ pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch
|
|||
|
||||
Note: last two functions are influenced by other control bits, not yet exported
|
||||
by the driver, so a change might not have any effect.
|
||||
|
||||
Implementation Details
|
||||
----------------------
|
||||
|
||||
Future driver development should bear in mind that the following registers have
|
||||
different functions on the 627EHF and the 627DHG. Some registers also have
|
||||
different power-on default values, but BIOS should already be loading
|
||||
appropriate defaults. Note that bank selection must be performed as is currently
|
||||
done in the driver for all register addresses.
|
||||
|
||||
0x49: only on DHG, selects temperature source for AUX fan, CPU fan0
|
||||
0x4a: not completely documented for the EHF and the DHG documentation assigns
|
||||
different behavior to bits 7 and 6, including extending the temperature
|
||||
input selection to SmartFan I, not just SmartFan III. Testing on the EHF
|
||||
will reveal whether they are compatible or not.
|
||||
|
||||
0x58: Chip ID: 0xa1=EHF 0xc1=DHG
|
||||
0x5e: only on DHG, has bits to enable "current mode" temperature detection and
|
||||
critical temperature protection
|
||||
0x45b: only on EHF, bit 3, vin4 alarm (EHF supports 10 inputs, only 9 on DHG)
|
||||
0x552: only on EHF, vin4
|
||||
0x558: only on EHF, vin4 high limit
|
||||
0x559: only on EHF, vin4 low limit
|
||||
0x6b: only on DHG, SYS fan critical temperature
|
||||
0x6c: only on DHG, CPU fan0 critical temperature
|
||||
0x6d: only on DHG, AUX fan critical temperature
|
||||
0x6e: only on DHG, CPU fan1 critical temperature
|
||||
|
||||
0x50-0x55 and 0x650-0x657 are marked "Test Register" for the EHF, but "Reserved
|
||||
Register" for the DHG
|
||||
|
||||
The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
|
||||
the ICH8 southbridge gets that data via PECI from the DHG, so that the
|
||||
southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
|
||||
|
|
|
@ -32,8 +32,10 @@
|
|||
|
||||
Supports the following chips:
|
||||
|
||||
Chip #vin #fan #pwm #temp chip_id man_id
|
||||
w83627ehf 10 5 4 3 0x88,0xa1 0x5ca3
|
||||
Chip #vin #fan #pwm #temp chip IDs man ID
|
||||
w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3
|
||||
0x8860 0xa1
|
||||
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
|
@ -55,8 +57,18 @@ static unsigned short address;
|
|||
* Super-I/O constants and functions
|
||||
*/
|
||||
|
||||
/*
|
||||
* The three following globals are initialized in w83627ehf_find(), before
|
||||
* the i2c-isa device is created. Otherwise, they could be stored in
|
||||
* w83627ehf_data. This is ugly, but necessary, and when the driver is next
|
||||
* updated to become a platform driver, the globals will disappear.
|
||||
*/
|
||||
static int REG; /* The register to read/write */
|
||||
static int VAL; /* The value to read/write */
|
||||
/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This
|
||||
* value is also used in w83627ehf_detect() to export a device name in sysfs
|
||||
* (e.g. w83627ehf or w83627dhg) */
|
||||
static int w83627ehf_num_in;
|
||||
|
||||
#define W83627EHF_LD_HWM 0x0b
|
||||
|
||||
|
@ -65,8 +77,10 @@ static int VAL; /* The value to read/write */
|
|||
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
|
||||
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
|
||||
|
||||
#define SIO_W83627EHF_ID 0x8840
|
||||
#define SIO_ID_MASK 0xFFC0
|
||||
#define SIO_W83627EHF_ID 0x8850
|
||||
#define SIO_W83627EHG_ID 0x8860
|
||||
#define SIO_W83627DHG_ID 0xa020
|
||||
#define SIO_ID_MASK 0xFFF0
|
||||
|
||||
static inline void
|
||||
superio_outb(int reg, int val)
|
||||
|
@ -115,8 +129,12 @@ superio_exit(void)
|
|||
|
||||
#define W83627EHF_REG_BANK 0x4E
|
||||
#define W83627EHF_REG_CONFIG 0x40
|
||||
#define W83627EHF_REG_CHIP_ID 0x49
|
||||
#define W83627EHF_REG_MAN_ID 0x4F
|
||||
|
||||
/* Not currently used:
|
||||
* REG_MAN_ID has the value 0x5ca3 for all supported chips.
|
||||
* REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
|
||||
* REG_MAN_ID is at port 0x4f
|
||||
* REG_CHIP_ID is at port 0x58 */
|
||||
|
||||
static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
|
||||
static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
|
||||
|
@ -429,7 +447,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
|
|||
}
|
||||
|
||||
/* Measured voltages and limits */
|
||||
for (i = 0; i < 10; i++) {
|
||||
for (i = 0; i < w83627ehf_num_in; i++) {
|
||||
data->in[i] = w83627ehf_read_value(client,
|
||||
W83627EHF_REG_IN(i));
|
||||
data->in_min[i] = w83627ehf_read_value(client,
|
||||
|
@ -1121,7 +1139,7 @@ static void w83627ehf_device_remove_files(struct device *dev)
|
|||
device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
|
||||
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
|
||||
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
|
||||
for (i = 0; i < 10; i++) {
|
||||
for (i = 0; i < w83627ehf_num_in; i++) {
|
||||
device_remove_file(dev, &sda_in_input[i].dev_attr);
|
||||
device_remove_file(dev, &sda_in_alarm[i].dev_attr);
|
||||
device_remove_file(dev, &sda_in_min[i].dev_attr);
|
||||
|
@ -1196,7 +1214,11 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
|
|||
client->flags = 0;
|
||||
dev = &client->dev;
|
||||
|
||||
if (w83627ehf_num_in == 9)
|
||||
strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE);
|
||||
else /* just say ehf. 627EHG is 627EHF in lead-free packaging. */
|
||||
strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
|
||||
|
||||
data->valid = 0;
|
||||
mutex_init(&data->update_lock);
|
||||
|
||||
|
@ -1246,7 +1268,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
|
|||
goto exit_remove;
|
||||
}
|
||||
|
||||
for (i = 0; i < 10; i++)
|
||||
for (i = 0; i < w83627ehf_num_in; i++)
|
||||
if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
|
||||
|| (err = device_create_file(dev,
|
||||
&sda_in_alarm[i].dev_attr))
|
||||
|
@ -1340,7 +1362,17 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr)
|
|||
|
||||
val = (superio_inb(SIO_REG_DEVID) << 8)
|
||||
| superio_inb(SIO_REG_DEVID + 1);
|
||||
if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) {
|
||||
switch (val & SIO_ID_MASK) {
|
||||
case SIO_W83627DHG_ID:
|
||||
w83627ehf_num_in = 9;
|
||||
break;
|
||||
case SIO_W83627EHF_ID:
|
||||
case SIO_W83627EHG_ID:
|
||||
w83627ehf_num_in = 10;
|
||||
break;
|
||||
default:
|
||||
printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n",
|
||||
val);
|
||||
superio_exit();
|
||||
return -ENODEV;
|
||||
}
|
||||
|
|
Loading…
Reference in a new issue