redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

These changes deal with the issues of relative includes

Browse source 
introduced by the earlier clean-up and clean up few more
 things for enabling multiplatform support.
 
 The multiplatform kernel has been booted on omaps on
 top of this branch with the work-in-progress patches
 applied manually.
 
 We cannot yet enable the multiplatform support though.
 We still need the common clock framework patches, some
 solution for dma-omap.h, and serial-omap.h moved before
 we can enable it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQmaU8AAoJEBvUPslcq6VzbfcQAOEIQpv2zQz68euDDkCndBcG
 rVjDIyAM/wgbxgdqK66FQvCZefQhSUBimBmjqagVwRh/2lIDZOfhIS98N5eMbJEQ
 3UJUuOAPJQLmwR4zyKgbi/hdWZDEjnYvMJEmVSeSpXSmRO844ggtc9F2K22ouQ5m
 CJ0WZE6p55v25bMLDETudLlzCfhrSGiApwV09IUxFAd9va7UeXibYt83oh1A6joo
 U0i6sGbMgxR3uLi/7q7Wlm6dbCVU5N8+EtJ2L/tkoAQDHb+iLmkC8n3N3KPBkrEu
 KpS7o3zuCDS3X6m8bD4w1j8WVeNX3ERA9avWMSBpfTQQcj0OvTPZixe7KC9WwT/4
 nI0bAKQ/JWmFV+Ibo5jtVS151XeEG6ggap6aa+F3wYpkORY+jWcX0djW+1NDwScB
 nGDcRI1n15jogoJJC9SB5wFW7K3wgi6Sb3Mo7nvNVvvQcHXpxiadujPP+tiHm7mn
 mDoMJYHa0oI9jlWPSrAC5E8rfSR1NYRv7A5BLkakGXErEED+MByJ84PR3q4xDivx
 B58HgsXTbJkQQug6o5yFK2vCKQW1Vsi0cdKrm3kY1JuLLfNMXbPFpAihxoLZ9Rp5
 oDTdPpslgdEMMvg346q7XLFYiG9F5Zoz60MaUpYBa5EsmA16WB2ZT0t5bLIpxglx
 0duNMqDZYsBrKc3aYjw3
 =8Nz+
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers

From Tony Lindgren <tony@atomide.com>:

These changes deal with the issues of relative includes
introduced by the earlier clean-up and clean up few more
things for enabling multiplatform support.

The multiplatform kernel has been booted on omaps on
top of this branch with the work-in-progress patches
applied manually.

We cannot yet enable the multiplatform support though.
We still need the common clock framework patches, some
solution for dma-omap.h, and serial-omap.h moved before
we can enable it.

* tag 'omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ARM: OMAP2+: Fix relative includes for serial.h
  ARM: OMAP: Fix relative includes for fpga.h
  ARM: OMAP1: Remove relative includes
  ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c
  ARM: OMAP: Fix relative includes for debug-devices.h
  ARM: OMAP: Remove plat-omap/common.h
  ARM: OMAP: Move omap-pm-noop.c local to mach-omap2
  ARM: OMAP: Fix relative includes for shared i2c.h file
  ARM: OMAP: Make plat-omap/i2c.c port checks local
  ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2
  ARM: OMAP: Move omap1 specific code to local sram.c
  ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset()
  ARM: OMAP: Split sram.h to local headers and minimal shared header
  ARM: OMAP1: usb: fix sparse warnings

Conflicts:
	arch/arm/mach-omap2/cm33xx.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2012-11-12 22:53:22 +01:00
parent 976669971f 6ba54ab4a4
commit 65829ef5a0
89 changed files with 958 additions and 1010 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
arch/arm/Kconfig
View file

@ -937,7 +937,6 @@ config ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).

3
arch/arm/mach-omap1/Makefile
View file

@ -3,7 +3,8 @@
#
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)

2
arch/arm/mach-omap1/board-fsample.c
View file

@ -30,13 +30,13 @@
#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
#include <../plat-omap/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
/* fsample is pretty close to p2-sample */

1
arch/arm/mach-omap1/board-innovator.c
View file

@ -33,7 +33,6 @@
#include <mach/mux.h>
#include <mach/flash.h>
#include <../plat-omap/fpga.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>

2
arch/arm/mach-omap1/board-perseus2.c
View file

@ -30,13 +30,13 @@
#include <mach/tc.h>
#include <mach/mux.h>
#include <../plat-omap/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),

3
arch/arm/mach-omap1/clock.c
View file

@ -24,12 +24,11 @@
#include <mach/hardware.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;

3
arch/arm/mach-omap1/clock_data.c
View file

@ -27,10 +27,9 @@
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "../plat-omap/sram.h"
#include "iomap.h"
#include "clock.h"
#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12

3
arch/arm/mach-omap1/common.h
View file

@ -26,11 +26,10 @@
#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
#include "../plat-omap/common.h"
#include <linux/mtd/mtd.h>
#include <linux/i2c-omap.h>
#include "../plat-omap/i2c.h"
#include <plat/i2c.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);

3
arch/arm/mach-omap1/devices.c
View file

@ -26,12 +26,11 @@
#include <mach/camera.h>
#include <mach/hardware.h>
#include "../plat-omap/sram.h"
#include "common.h"
#include "clock.h"
#include "dma.h"
#include "mmc.h"
#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)

3
arch/arm/mach-omap1/dma.c
View file

@ -321,6 +321,9 @@ static int __init omap1_system_dma_init(void)
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
if (cpu_is_omap16xx())
d->dev_caps = ENABLE_16XX_MODE;
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;

3
arch/arm/mach-omap1/fpga.c
View file

@ -27,12 +27,11 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <../plat-omap/fpga.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
static void fpga_mask_irq(struct irq_data *d)
{

22
arch/arm/plat-omap/fpga.h → arch/arm/mach-omap1/fpga.h
View file

@ -1,6 +1,4 @@
/*
* arch/arm/plat-omap/include/mach/fpga.h
*
* Interrupt handler for OMAP-1510 FPGA
*
* Copyright (C) 2001 RidgeRun, Inc.
@ -38,26 +36,6 @@
#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
/* NOTE: most boards don't have a static mapping for the FPGA ... */
struct h2p2_dbg_fpga {
/* offset 0x00 */
u16 smc91x[8];
/* offset 0x10 */
u16 fpga_rev;
u16 board_rev;
u16 gpio_outputs;
u16 leds;
/* offset 0x18 */
u16 misc_inputs;
u16 lan_status;
u16 lan_reset;
u16 reserved0;
/* offset 0x20 */
u16 ps2_data;
u16 ps2_ctrl;
/* plus also 4 rs232 ports ... */
};
/* LEDs definition on debug board (16 LEDs, all physically green) */
#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)

2
arch/arm/mach-omap1/gpio15xx.c
View file

@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/irqs.h>
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000

2
arch/arm/mach-omap1/gpio16xx.c
View file

@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/irqs.h>
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400

2
arch/arm/mach-omap1/gpio7xx.c
View file

@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/irqs.h>
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000

5
arch/arm/mach-omap1/i2c.c
View file

@ -23,7 +23,7 @@
#include <mach/mux.h>
#include "soc.h"
#include "../plat-omap/i2c.h"
#include <plat/i2c.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
@ -54,6 +54,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
struct platform_device *pdev;
struct resource *res;
if (bus_id > 1)
return -EINVAL;
omap1_i2c_mux_pins(bus_id);
pdev = &omap_i2c_devices[bus_id - 1];

2
arch/arm/mach-omap1/include/mach/entry-macro.S
View file

@ -13,8 +13,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "../../iomap.h"
.macro get_irqnr_preamble, base, tmp
.endm

3
arch/arm/mach-omap1/include/mach/gpio.h
View file

@ -1,3 +0,0 @@
/*
* arch/arm/mach-omap1/include/mach/gpio.h
*/

5
arch/arm/mach-omap1/include/mach/hardware.h
View file

@ -39,7 +39,7 @@
#include <asm/sizes.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
#include "../../mach-omap1/soc.h"
#include <mach/soc.h>
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
@ -72,6 +72,9 @@ static inline u32 omap_cs3_phys(void)
#endif /* ifndef __ASSEMBLER__ */
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
#include <mach/serial.h>
/*

2
arch/arm/mach-omap1/include/mach/memory.h
View file

@ -19,7 +19,7 @@
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
#include "../../mach-omap1/soc.h"
#include <mach/soc.h>
/*
* OMAP-1510 Local Bus address offset

229
arch/arm/mach-omap1/include/mach/soc.h Normal file
View file

@ -0,0 +1,229 @@
/*
* OMAP cpu type detection
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
* Copyright (C) 2009-11 Texas Instruments.
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
/*
* Test if multicore OMAP support is needed
*/
#undef MULTI_OMAP1
#undef OMAP_NAME
#ifdef CONFIG_ARCH_OMAP730
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap730
# endif
#endif
#ifdef CONFIG_ARCH_OMAP850
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap850
# endif
#endif
#ifdef CONFIG_ARCH_OMAP15XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap1510
# endif
#endif
#ifdef CONFIG_ARCH_OMAP16XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap16xx
# endif
#endif
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
* CPU revision (See _REV_ defined in cpu.h) [15:08]
* CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
*/
unsigned int omap_rev(void);
/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730, OMAP850
* cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
#define IS_OMAP_CLASS(class, id) \
static inline int is_omap ##class (void) \
{ \
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
static inline int is_omap ##subclass (void) \
{ \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP850)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() is_omap16xx()
# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP850)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() 1
# endif
#endif
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
* cpu_is_omap310(): True for OMAP310
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
* cpu_is_omap5912(): True for OMAP5912
* cpu_is_omap1621(): True for OMAP1621
* cpu_is_omap1710(): True for OMAP1710
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
#define IS_OMAP_TYPE(type, id) \
static inline int is_omap ##type (void) \
{ \
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
IS_OMAP_TYPE(310, 0x0310)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
IS_OMAP_TYPE(5912, 0x1611)
IS_OMAP_TYPE(1621, 0x1621)
IS_OMAP_TYPE(1710, 0x1710)
#define cpu_is_omap310() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
#define cpu_is_omap1611() 0
#define cpu_is_omap1621() 0
#define cpu_is_omap1710() 0
/* These are needed to compile common code */
#ifdef CONFIG_ARCH_OMAP1
#define cpu_is_omap242x() 0
#define cpu_is_omap2430() 0
#define cpu_is_omap243x() 0
#define cpu_is_omap24xx() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap44xx() 0
#define soc_is_omap54xx() 0
#define soc_is_am33xx() 0
#define cpu_class_is_omap1() 1
#define cpu_class_is_omap2() 0
#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
* between 310 vs. 1510 and 1611B/5912 vs. 1710.
*/
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
# define cpu_is_omap310() is_omap310()
# define cpu_is_omap1510() is_omap1510()
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap1610
# undef cpu_is_omap1611
# undef cpu_is_omap5912
# undef cpu_is_omap1621
# undef cpu_is_omap1710
# define cpu_is_omap1610() is_omap1610()
# define cpu_is_omap1611() is_omap1611()
# define cpu_is_omap5912() is_omap5912()
# define cpu_is_omap1621() is_omap1621()
# define cpu_is_omap1710() is_omap1710()
#endif
#endif /* __ASSEMBLY__ */
#endif

1
arch/arm/mach-omap1/io.c
View file

@ -134,7 +134,6 @@ void __init omap1_init_early(void)
*/
omap1_clk_init();
omap1_mux_init();
omap_init_consistent_dma_size();
}
void __init omap1_init_late(void)

3
arch/arm/mach-omap1/iomap.h
View file

@ -22,9 +22,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping

4
arch/arm/mach-omap1/pm.c
View file

@ -44,6 +44,7 @@
#include <linux/io.h>
#include <linux/atomic.h>
#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
@ -56,11 +57,10 @@
#include <mach/irqs.h>
#include "../plat-omap/sram.h"
#include "iomap.h"
#include "clock.h"
#include "pm.h"
#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];

2
arch/arm/mach-omap1/sleep.S
View file

@ -36,6 +36,8 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "pm.h"

229
arch/arm/mach-omap1/soc.h
View file

@ -1,229 +1,4 @@
/*
* OMAP cpu type detection
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
* Copyright (C) 2009-11 Texas Instruments.
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* We can move mach/soc.h here once the drivers are fixed
*/
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
/*
* Test if multicore OMAP support is needed
*/
#undef MULTI_OMAP1
#undef OMAP_NAME
#ifdef CONFIG_ARCH_OMAP730
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap730
# endif
#endif
#ifdef CONFIG_ARCH_OMAP850
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap850
# endif
#endif
#ifdef CONFIG_ARCH_OMAP15XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap1510
# endif
#endif
#ifdef CONFIG_ARCH_OMAP16XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap16xx
# endif
#endif
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
* CPU revision (See _REV_ defined in cpu.h) [15:08]
* CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
*/
unsigned int omap_rev(void);
/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730, OMAP850
* cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
#define IS_OMAP_CLASS(class, id) \
static inline int is_omap ##class (void) \
{ \
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
static inline int is_omap ##subclass (void) \
{ \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP850)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() is_omap16xx()
# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP850)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() 1
# endif
#endif
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
* cpu_is_omap310(): True for OMAP310
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
* cpu_is_omap5912(): True for OMAP5912
* cpu_is_omap1621(): True for OMAP1621
* cpu_is_omap1710(): True for OMAP1710
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
#define IS_OMAP_TYPE(type, id) \
static inline int is_omap ##type (void) \
{ \
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
IS_OMAP_TYPE(310, 0x0310)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
IS_OMAP_TYPE(5912, 0x1611)
IS_OMAP_TYPE(1621, 0x1621)
IS_OMAP_TYPE(1710, 0x1710)
#define cpu_is_omap310() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
#define cpu_is_omap1611() 0
#define cpu_is_omap1621() 0
#define cpu_is_omap1710() 0
/* These are needed to compile common code */
#ifdef CONFIG_ARCH_OMAP1
#define cpu_is_omap242x() 0
#define cpu_is_omap2430() 0
#define cpu_is_omap243x() 0
#define cpu_is_omap24xx() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap44xx() 0
#define soc_is_omap54xx() 0
#define soc_is_am33xx() 0
#define cpu_class_is_omap1() 1
#define cpu_class_is_omap2() 0
#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
* between 310 vs. 1510 and 1611B/5912 vs. 1710.
*/
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
# define cpu_is_omap310() is_omap310()
# define cpu_is_omap1510() is_omap1510()
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap1610
# undef cpu_is_omap1611
# undef cpu_is_omap5912
# undef cpu_is_omap1621
# undef cpu_is_omap1710
# define cpu_is_omap1610() is_omap1610()
# define cpu_is_omap1611() is_omap1611()
# define cpu_is_omap5912() is_omap5912()
# define cpu_is_omap1621() is_omap1621()
# define cpu_is_omap1710() is_omap1710()
#endif
#endif /* __ASSEMBLY__ */
#endif
#include <mach/soc.h>

76
arch/arm/mach-omap1/sram-init.c Normal file
View file

@ -0,0 +1,76 @@
/*
* OMAP SRAM detection and management
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "soc.h"
#include "sram.h"
#define OMAP1_SRAM_PA 0x20000000
#define SRAM_BOOTLOADER_SZ 0x80
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_and_map_sram(void)
{
unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
unsigned long omap_sram_start = OMAP1_SRAM_PA;
unsigned long omap_sram_size;
if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1611() ||
cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
omap_map_sram(omap_sram_start, omap_sram_size,
omap_sram_skip, 1);
}
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
BUG_ON(!_omap_sram_reprogram_clock);
/* On 730, bit 13 must always be 1 */
if (cpu_is_omap7xx())
ckctl |= 0x2000;
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
int __init omap_sram_init(void)
{
omap_detect_and_map_sram();
_omap_sram_reprogram_clock =
omap_sram_push(omap1_sram_reprogram_clock,
omap1_sram_reprogram_clock_sz);
return 0;
}

7
arch/arm/mach-omap1/sram.h Normal file
View file

@ -0,0 +1,7 @@
#include <plat/sram.h>
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;

1
arch/arm/mach-omap1/timer32k.c
View file

@ -50,6 +50,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include <mach/hardware.h>

6
arch/arm/mach-omap1/usb.c
View file

@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata)
#endif
u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
return syscon1 << 16;
}
u32 __init omap1_usb1_init(unsigned nwires)
static u32 __init omap1_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
@ -475,7 +475,7 @@ bad:
return syscon1 << 20;
}
u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;

3
arch/arm/mach-omap2/Makefile
View file

@ -5,7 +5,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o
omap_device.o sram.o
omap-2-3-common = irq.o
hwmod-common = omap_hwmod.o \
@ -75,6 +75,7 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o

1
arch/arm/mach-omap2/board-2430sdp.c
View file

@ -28,7 +28,6 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

2
arch/arm/mach-omap2/board-cm-t35.c
View file

@ -44,8 +44,6 @@
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <mach/hardware.h>
#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"

2
arch/arm/mach-omap2/board-h4.c
View file

@ -33,7 +33,7 @@
#include <asm/mach/map.h>
#include <plat-omap/dma-omap.h>
#include "debug-devices.h"
#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>

3
arch/arm/mach-omap2/clkt2xxx_dpllcore.c
View file

@ -25,14 +25,13 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */

3
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
View file

@ -33,8 +33,6 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
@ -42,6 +40,7 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;

3
arch/arm/mach-omap2/clkt34xx_dpll3m2.c
View file

@ -21,12 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
#include "sram.h"
#define CYCLES_PER_MHZ 1000000

2
arch/arm/mach-omap2/cm33xx.c
View file

@ -22,8 +22,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include "../plat-omap/common.h"
#include "clockdomain.h"
#include "cm.h"
#include "cm33xx.h"

5
arch/arm/mach-omap2/common.h
View file

@ -34,8 +34,6 @@
#include <asm/proc-fns.h>
#include "../plat-omap/common.h"
#include "i2c.h"
#include "serial.h"
@ -345,5 +343,8 @@ struct omap2_hsmmc_info;
extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
extern void omap_reserve(void);
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

3
arch/arm/mach-omap2/dma.c
View file

@ -276,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
return -ENOMEM;
}
if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
d->dev_caps |= HS_CHANNELS_RESERVED;
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;

1
arch/arm/mach-omap2/hsmmc.c
View file

@ -14,7 +14,6 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <linux/platform_data/gpio-omap.h>
#include "soc.h"

16
arch/arm/mach-omap2/i2c.c
View file

@ -109,6 +109,19 @@ int omap_i2c_reset(struct omap_hwmod *oh)
return 0;
}
static int __init omap_i2c_nr_ports(void)
{
int ports = 0;
if (cpu_is_omap24xx())
ports = 2;
else if (cpu_is_omap34xx())
ports = 3;
else if (cpu_is_omap44xx())
ports = 4;
return ports;
}
static const char name[] = "omap_i2c";
int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
@ -121,6 +134,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
struct omap_i2c_bus_platform_data *pdata;
struct omap_i2c_dev_attr *dev_attr;
if (bus_id > omap_i2c_nr_ports())
return -EINVAL;
omap2_i2c_mux_pins(bus_id);
l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);

2
arch/arm/mach-omap2/i2c.h
View file

@ -19,7 +19,7 @@
*
*/
#include "../plat-omap/i2c.h"
#include <plat/i2c.h>
#ifndef __MACH_OMAP2_I2C_H
#define __MACH_OMAP2_I2C_H

2
arch/arm/mach-omap2/include/mach/debug-macro.S
View file

@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
#include <../mach-omap2/serial.h>
#include <mach/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)

3
arch/arm/mach-omap2/include/mach/gpio.h
View file

@ -1,3 +0,0 @@
/*
* arch/arm/mach-omap2/include/mach/gpio.h
*/

103
arch/arm/mach-omap2/include/mach/serial.h Normal file
View file

@ -0,0 +1,103 @@
/*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Memory entry used for the DEBUG_LL UART configuration, relative to
* start of RAM. See also uncompress.h and debug-macro.S.
*
* Note that using a memory location for storing the UART configuration
* has at least two limitations:
*
* 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
* uncompress code could then partially overwrite itself
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
#define OMAP_UART_INFO_OFS 0x3ffc
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
#define OMAP2_UART3_BASE 0x4806e000
/* OMAP3 serial ports */
#define OMAP3_UART1_BASE OMAP2_UART1_BASE
#define OMAP3_UART2_BASE OMAP2_UART2_BASE
#define OMAP3_UART3_BASE 0x49020000
#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
/* OMAP4 serial ports */
#define OMAP4_UART1_BASE OMAP2_UART1_BASE
#define OMAP4_UART2_BASE OMAP2_UART2_BASE
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
/* TI81XX serial ports */
#define TI81XX_UART1_BASE 0x48020000
#define TI81XX_UART2_BASE 0x48022000
#define TI81XX_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
/* AM33XX serial port */
#define AM33XX_UART1_BASE 0x44E09000
/* OMAP5 serial ports */
#define OMAP5_UART1_BASE OMAP2_UART1_BASE
#define OMAP5_UART2_BASE OMAP2_UART2_BASE
#define OMAP5_UART3_BASE OMAP4_UART3_BASE
#define OMAP5_UART4_BASE OMAP4_UART4_BASE
#define OMAP5_UART5_BASE 0x48066000
#define OMAP5_UART6_BASE 0x48068000
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
#define ZOOM_PORT_SHIFT 1
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
#define OMAP3UART1 OMAP2UART1
#define OMAP3UART2 OMAP2UART2
#define OMAP3UART3 33
#define OMAP3UART4 34 /* Only on 36xx */
#define OMAP4UART1 OMAP2UART1
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
#define TI81XXUART1 81
#define TI81XXUART2 82
#define TI81XXUART3 83
#define AM33XXUART1 84
#define OMAP5UART3 OMAP4UART3
#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
#ifndef __ASSEMBLER__
struct omap_board_data;
struct omap_uart_port_info;
extern void omap_serial_init(void);
extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif

2
arch/arm/mach-omap2/include/mach/uncompress.h
View file

@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <../mach-omap2/serial.h>
#include <mach/serial.h>
#define MDR1_MODE_MASK 0x07

15
arch/arm/mach-omap2/io.c
View file

@ -27,8 +27,6 @@
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "omap_hwmod.h"
#include "soc.h"
#include "iomap.h"
@ -43,6 +41,7 @@
#include "omap-pm.h"
#include "sdrc.h"
#include "serial.h"
#include "sram.h"
/*
* The machine specific code may provide the extra mapping besides the
@ -354,11 +353,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
static void __init omap_common_init_early(void)
{
omap_init_consistent_dma_size();
}
static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
@ -379,7 +373,6 @@ void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
omap2xxx_check_revision();
omap_common_init_early();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
@ -401,7 +394,6 @@ void __init omap2430_init_early(void)
{
omap2_set_globals_243x();
omap2xxx_check_revision();
omap_common_init_early();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
@ -428,7 +420,6 @@ void __init omap3_init_early(void)
omap2_set_globals_3xxx();
omap3xxx_check_revision();
omap3xxx_check_features();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
@ -462,7 +453,6 @@ void __init ti81xx_init_early(void)
omap2_set_globals_ti81xx();
omap3xxx_check_revision();
ti81xx_check_features();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
@ -520,7 +510,6 @@ void __init am33xx_init_early(void)
omap2_set_globals_am33xx();
omap3xxx_check_revision();
ti81xx_check_features();
omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
@ -536,7 +525,6 @@ void __init omap4430_init_early(void)
omap2_set_globals_443x();
omap4xxx_check_revision();
omap4xxx_check_features();
omap_common_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
@ -558,7 +546,6 @@ void __init omap5_init_early(void)
{
omap2_set_globals_5xxx();
omap5xxx_check_revision();
omap_common_init_early();
}
#endif

4
arch/arm/plat-omap/omap-pm-noop.c → arch/arm/mach-omap2/omap-pm-noop.c
View file

@ -22,8 +22,8 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include "../mach-omap2/omap_device.h"
#include "../mach-omap2/omap-pm.h"
#include "omap_device.h"
#include "omap-pm.h"
static bool off_mode_enabled;
static int dummy_context_loss_counter;

3
arch/arm/mach-omap2/omap4-common.c
View file

@ -25,8 +25,6 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include "../plat-omap/sram.h"
#include "omap-wakeupgen.h"
#include "soc.h"
#include "common.h"
@ -34,6 +32,7 @@
#include "hsmmc.h"
#include "omap4-sar-layout.h"
#include "omap-secure.h"
#include "sram.h"
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;

2
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
View file

@ -12,8 +12,6 @@
#include <plat-omap/dma-omap.h>
#include "../plat-omap/common.h"
#include "omap_hwmod.h"
#include "hdq1w.h"

2
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file

@ -30,8 +30,6 @@
#include <plat/dmtimer.h>
#include <plat/iommu.h>
#include "../plat-omap/common.h"
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"

5
arch/arm/mach-omap2/pm24xx.c
View file

@ -31,6 +31,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/fncpy.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
@ -38,8 +40,6 @@
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "common.h"
#include "clock.h"
@ -48,6 +48,7 @@
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"

4
arch/arm/mach-omap2/pm34xx.c
View file

@ -32,6 +32,7 @@
#include <trace/events/power.h>
#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
@ -40,8 +41,6 @@
#include <plat/prcm.h>
#include <plat-omap/dma-omap.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "common.h"
#include "cm3xxx.h"
@ -51,6 +50,7 @@
#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "sram.h"
#include "control.h"
/* pm34xx errata defined in pm.h */

2
arch/arm/mach-omap2/prm33xx.c
View file

@ -19,8 +19,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include "../plat-omap/common.h"
#include "common.h"
#include "powerdomain.h"
#include "prm33xx.h"

1
arch/arm/mach-omap2/prm_common.c
View file

@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include "../plat-omap/common.h"
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"

2
arch/arm/mach-omap2/sdrc.c
View file

@ -23,8 +23,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "common.h"
#include "clock.h"
#include "sdrc.h"

3
arch/arm/mach-omap2/sdrc2xxx.c
View file

@ -24,14 +24,13 @@
#include <linux/clk.h>
#include <linux/io.h>
#include "../plat-omap/sram.h"
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx.h"
#include "clock.h"
#include "sdrc.h"
#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1

113
arch/arm/mach-omap2/serial.h
View file

@ -1,112 +1 @@
/*
* arch/arm/plat-omap/include/mach/serial.h
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_SERIAL_H
#define __ASM_ARCH_SERIAL_H
#include <linux/init.h>
/*
* Memory entry used for the DEBUG_LL UART configuration, relative to
* start of RAM. See also uncompress.h and debug-macro.S.
*
* Note that using a memory location for storing the UART configuration
* has at least two limitations:
*
* 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
* uncompress code could then partially overwrite itself
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
#define OMAP_UART_INFO_OFS 0x3ffc
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
#define OMAP2_UART3_BASE 0x4806e000
/* OMAP3 serial ports */
#define OMAP3_UART1_BASE OMAP2_UART1_BASE
#define OMAP3_UART2_BASE OMAP2_UART2_BASE
#define OMAP3_UART3_BASE 0x49020000
#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
/* OMAP4 serial ports */
#define OMAP4_UART1_BASE OMAP2_UART1_BASE
#define OMAP4_UART2_BASE OMAP2_UART2_BASE
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
/* TI81XX serial ports */
#define TI81XX_UART1_BASE 0x48020000
#define TI81XX_UART2_BASE 0x48022000
#define TI81XX_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
/* AM33XX serial port */
#define AM33XX_UART1_BASE 0x44E09000
/* OMAP5 serial ports */
#define OMAP5_UART1_BASE OMAP2_UART1_BASE
#define OMAP5_UART2_BASE OMAP2_UART2_BASE
#define OMAP5_UART3_BASE OMAP4_UART3_BASE
#define OMAP5_UART4_BASE OMAP4_UART4_BASE
#define OMAP5_UART5_BASE 0x48066000
#define OMAP5_UART6_BASE 0x48068000
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
#define ZOOM_PORT_SHIFT 1
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
#define OMAP3UART1 OMAP2UART1
#define OMAP3UART2 OMAP2UART2
#define OMAP3UART3 33
#define OMAP3UART4 34 /* Only on 36xx */
#define OMAP4UART1 OMAP2UART1
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
#define TI81XXUART1 81
#define TI81XXUART2 82
#define TI81XXUART3 83
#define AM33XXUART1 84
#define OMAP5UART3 OMAP4UART3
#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
#ifndef __ASSEMBLER__
struct omap_board_data;
struct omap_uart_port_info;
extern void omap_serial_init(void);
extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif
#endif
#include <mach/serial.h>

3
arch/arm/mach-omap2/sleep34xx.S
View file

@ -26,13 +26,12 @@
#include <asm/assembler.h>
#include "../plat-omap/sram.h"
#include "omap34xx.h"
#include "iomap.h"
#include "cm3xxx.h"
#include "prm3xxx.h"
#include "sdrc.h"
#include "sram.h"
#include "control.h"
/*

305
arch/arm/mach-omap2/sram.c Normal file
View file

@ -0,0 +1,305 @@
/*
*
* OMAP SRAM detection and management
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009-2012 Texas Instruments
* Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
#include "sram.h"
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#ifdef CONFIG_OMAP4_ERRATA_I688
#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
#else
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#endif
#define OMAP5_SRAM_PA 0x40300000
#define SRAM_BOOTLOADER_SZ 0x00
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
#define GP_DEVICE 0x300
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
* SRAM varies. The default accessible size for all device types is 2k. A GP
* device allows ARM11 but not other initiators for full size. This
* functionality seems ok until some nice security API happens.
*/
static int is_sram_locked(void)
{
if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
if (cpu_is_omap242x()) {
__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
if (cpu_is_omap34xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
}
return 0;
} else
return 1; /* assume locked with no PPA or security driver */
}
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_sram(void)
{
omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else if (soc_is_omap54xx()) {
omap_sram_start = OMAP5_SRAM_PA;
omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (soc_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else if (soc_is_omap54xx()) {
omap_sram_start = OMAP5_SRAM_PA;
omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
else if (cpu_is_omap243x())
omap_sram_size = 0x10000; /* 64K */
}
}
}
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap2_map_sram(void)
{
int cached = 1;
#ifdef CONFIG_OMAP4_ERRATA_I688
if (cpu_is_omap44xx()) {
omap_sram_start += PAGE_SIZE;
omap_sram_size -= SZ_16K;
}
#endif
if (cpu_is_omap34xx()) {
/*
* SRAM must be marked as non-cached on OMAP3 since the
* CORE DPLL M2 divider change code (in SRAM) runs with the
* SDRAM controller disabled, and if it is marked cached,
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
cached = 0;
}
omap_map_sram(omap_sram_start, omap_sram_size,
omap_sram_skip, cached);
}
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
u32 mem_type);
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#ifdef CONFIG_SOC_OMAP2420
static int __init omap242x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
omap242x_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
omap242x_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
omap242x_sram_set_prcm_sz);
return 0;
}
#else
static inline int omap242x_sram_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_SOC_OMAP2430
static int __init omap243x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
omap243x_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
omap243x_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
omap243x_sram_set_prcm_sz);
return 0;
}
#else
static inline int omap243x_sram_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_ARCH_OMAP3
static u32 (*_omap3_sram_configure_core_dpll)(
u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(
m2, unlock_dll, f, inc,
sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
sdrc_actim_ctrl_b_0, sdrc_mr_0,
sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
void omap3_sram_restore_context(void)
{
omap_sram_reset();
_omap3_sram_configure_core_dpll =
omap_sram_push(omap3_sram_configure_core_dpll,
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
static inline int omap34xx_sram_init(void)
{
omap3_sram_restore_context();
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
static inline int am33xx_sram_init(void)
{
return 0;
}
int __init omap_sram_init(void)
{
omap_detect_sram();
omap2_map_sram();
if (cpu_is_omap242x())
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
else if (soc_is_am33xx())
am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
return 0;
}

26
arch/arm/plat-omap/sram.h → arch/arm/mach-omap2/sram.h
View file

@ -1,6 +1,4 @@
/*
* arch/arm/plat-omap/include/mach/sram.h
*
* Interface for functions that need to be run in internal SRAM
*
* This program is free software; you can redistribute it and/or modify
@ -8,26 +6,8 @@
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
#include <asm/fncpy.h>
int __init omap_sram_init(void);
extern void *omap_sram_push_address(unsigned long size);
/* Macro to push a function to the internal SRAM, using the fncpy API */
#define omap_sram_push(funcp, size) ({ \
typeof(&(funcp)) _res = NULL; \
void *_sram_address = omap_sram_push_address(size); \
if (_sram_address) \
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
#include <plat/sram.h>
extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
@ -44,9 +24,6 @@ extern u32 omap3_configure_core_dpll(
extern void omap3_sram_restore_context(void);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap24xx_sram_reprogram_clock_sz;
@ -104,4 +81,3 @@ static inline void omap_push_sram_idle(void) {}
#define OMAP4_SRAM_PA 0x40300000
#endif
#define AM33XX_SRAM_PA 0x40300000
#endif

3
arch/arm/mach-omap2/timer.c
View file

@ -45,6 +45,7 @@
#include <asm/arch_timer.h>
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include "omap-pm.h"
@ -559,6 +560,8 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
if (timer_dev_attr)
pdata->timer_capability = timer_dev_attr->timer_capability;
pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
NULL, 0, 0);

3
arch/arm/plat-omap/Makefile
View file

@ -3,7 +3,7 @@
#
# Common support
obj-y := common.o sram.o dma.o fb.o counter_32k.o
obj-y := sram.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
@ -19,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o

27
arch/arm/plat-omap/common.c
View file

@ -1,27 +0,0 @@
/*
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
* The file is created by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include "common.h"
#include <plat-omap/dma-omap.h>
void __init omap_init_consistent_dma_size(void)
{
#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
#endif
}

36
arch/arm/plat-omap/common.h
View file

@ -1,36 +0,0 @@
/*
* Header for shared OMAP code in plat-omap.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
extern int __init omap_init_clocksource_32k(void __iomem *vbase);
extern void __init omap_check_revision(void);
extern void omap_reserve(void);
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */

2
arch/arm/plat-omap/counter_32k.c
View file

@ -22,8 +22,6 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
#include "common.h"
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
#define OMAP2_32KSYNCNT_REV_OFF 0x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)

3
arch/arm/plat-omap/debug-devices.c
View file

@ -15,8 +15,7 @@
#include <linux/io.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include "../mach-omap2/debug-devices.h"
#include <plat/debug-devices.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.

23
arch/arm/plat-omap/debug-leds.c
View file

@ -17,16 +17,33 @@
#include <linux/platform_data/gpio-omap.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include "fpga.h"
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
*/
/* NOTE: most boards don't have a static mapping for the FPGA ... */
struct h2p2_dbg_fpga {
/* offset 0x00 */
u16 smc91x[8];
/* offset 0x10 */
u16 fpga_rev;
u16 board_rev;
u16 gpio_outputs;
u16 leds;
/* offset 0x18 */
u16 misc_inputs;
u16 lan_status;
u16 lan_reset;
u16 reserved0;
/* offset 0x20 */
u16 ps2_data;
u16 ps2_ctrl;
/* plus also 4 rs232 ports ... */
};
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 fpga_led_state;

108
arch/arm/plat-omap/dma.c
View file

@ -38,9 +38,6 @@
#include <plat-omap/dma-omap.h>
#include "../mach-omap1/soc.h"
#include "../mach-omap2/soc.h"
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
* channels that an instance of the SDMA IP block can support. Used
@ -182,7 +179,7 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
unsigned long reg;
u32 l;
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
switch (dst_port) {
case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
reg = OMAP_TC_OCPT1_PRIOR;
@ -234,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
l |= data_type;
p->dma_write(l, CSDP, lch);
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
u16 ccr;
ccr = p->dma_read(CCR, lch);
@ -250,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
p->dma_write(ccr, CCR2, lch);
}
if (cpu_class_is_omap2() && dma_trigger) {
if (dma_omap2plus() && dma_trigger) {
u32 val;
val = p->dma_read(CCR, lch);
@ -290,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
BUG_ON(omap_dma_in_1510_mode());
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
u16 w;
w = p->dma_read(CCR2, lch);
@ -320,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
p->dma_write(w, LCH_CTRL, lch);
}
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
u32 val;
val = p->dma_read(CCR, lch);
@ -348,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode);
void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
u32 csdp;
csdp = p->dma_read(CSDP, lch);
@ -361,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode);
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
if (dma_omap1() && !dma_omap15xx()) {
u32 l;
l = p->dma_read(LCH_CTRL, lch);
@ -379,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
{
u32 l;
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
u16 w;
w = p->dma_read(CSDP, lch);
@ -421,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params);
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
if (cpu_class_is_omap2())
if (dma_omap2plus())
return;
p->dma_write(eidx, CSEI, lch);
@ -453,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
if (cpu_class_is_omap2())
if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
burst = 0x2;
break;
}
@ -469,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
* fall through
*/
case OMAP_DMA_DATA_BURST_16:
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
burst = 0x3;
break;
}
@ -493,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
{
u32 l;
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
l = p->dma_read(CSDP, lch);
l &= ~(0x1f << 9);
l |= dest_port << 9;
@ -514,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params);
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
if (cpu_class_is_omap2())
if (dma_omap2plus())
return;
p->dma_write(eidx, CDEI, lch);
@ -546,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
if (cpu_class_is_omap2())
if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
if (cpu_class_is_omap2())
if (dma_omap2plus())
burst = 0x2;
else
burst = 0x3;
break;
case OMAP_DMA_DATA_BURST_16:
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
burst = 0x3;
break;
}
@ -579,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
static inline void omap_enable_channel_irq(int lch)
{
/* Clear CSR */
if (cpu_class_is_omap1())
if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@ -593,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch)
/* disable channel interrupts */
p->dma_write(0, CICR, lch);
/* Clear CSR */
if (cpu_class_is_omap1())
if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@ -617,7 +614,7 @@ static inline void enable_lnk(int lch)
l = p->dma_read(CLNK_CTRL, lch);
if (cpu_class_is_omap1())
if (dma_omap1())
l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
@ -625,7 +622,7 @@ static inline void enable_lnk(int lch)
l = dma_chan[lch].next_lch | (1 << 15);
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2())
if (dma_omap2plus())
if (dma_chan[lch].next_linked_ch != -1)
l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
@ -642,12 +639,12 @@ static inline void disable_lnk(int lch)
/* Disable interrupts */
omap_disable_channel_irq(lch);
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
@ -661,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch)
u32 val;
unsigned long flags;
if (!cpu_class_is_omap2())
if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
@ -679,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch)
u32 val;
unsigned long flags;
if (!cpu_class_is_omap2())
if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
@ -718,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
if (p->clear_lch_regs)
p->clear_lch_regs(free_ch);
if (cpu_class_is_omap2())
if (dma_omap2plus())
omap_clear_dma(free_ch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
@ -729,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
chan->chain_id = -1;
chan->next_linked_ch = -1;
}
@ -737,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
if (cpu_class_is_omap1())
if (dma_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
else if (cpu_class_is_omap2())
else if (dma_omap2plus())
chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
OMAP2_DMA_TRANS_ERR_IRQ;
if (cpu_is_omap16xx()) {
if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
if (dev_id != 0) {
set_gdma_dev(free_ch + 1, dev_id);
@ -754,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name,
* id.
*/
p->dma_write(dev_id | (1 << 10), CCR, free_ch);
} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
} else if (dma_omap1()) {
p->dma_write(dev_id, CCR, free_ch);
}
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
omap_enable_channel_irq(free_ch);
omap2_enable_irq_lch(free_ch);
}
@ -780,7 +777,7 @@ void omap_free_dma(int lch)
}
/* Disable interrupt for logical channel */
if (cpu_class_is_omap2())
if (dma_omap2plus())
omap2_disable_irq_lch(lch);
/* Disable all DMA interrupts for the channel. */
@ -790,7 +787,7 @@ void omap_free_dma(int lch)
p->dma_write(0, CCR, lch);
/* Clear registers */
if (cpu_class_is_omap2())
if (dma_omap2plus())
omap_clear_dma(lch);
spin_lock_irqsave(&dma_chan_lock, flags);
@ -816,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
{
u32 reg;
if (!cpu_class_is_omap2()) {
if (dma_omap1()) {
printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
return;
}
@ -855,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
}
l = p->dma_read(CCR, lch);
l &= ~((1 << 6) | (1 << 26));
if (cpu_class_is_omap2() && !cpu_is_omap242x())
if (d->dev_caps & IS_RW_PRIORITY)
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@ -888,7 +885,7 @@ void omap_start_dma(int lch)
* The CPC/CDAC register needs to be initialized to zero
* before starting dma transfer.
*/
if (cpu_is_omap15xx())
if (dma_omap15xx())
p->dma_write(0, CPC, lch);
else
p->dma_write(0, CDAC, lch);
@ -1051,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
{
dma_addr_t offset = 0;
if (cpu_is_omap15xx())
if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CSAC, lch);
@ -1059,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
offset = p->dma_read(CSAC, lch);
if (!cpu_is_omap15xx()) {
if (!dma_omap15xx()) {
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
* not been started (no data has been transferred so far).
@ -1071,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
offset = p->dma_read(CSSA, lch);
}
if (cpu_class_is_omap1())
if (dma_omap1())
offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
return offset;
@ -1090,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
{
dma_addr_t offset = 0;
if (cpu_is_omap15xx())
if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CDAC, lch);
@ -1099,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
if (!cpu_is_omap15xx() && offset == 0) {
if (!dma_omap15xx() && offset == 0) {
offset = p->dma_read(CDAC, lch);
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
@ -1110,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
offset = p->dma_read(CDSA, lch);
}
if (cpu_class_is_omap1())
if (dma_omap1())
offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
return offset;
@ -1127,7 +1124,7 @@ int omap_dma_running(void)
{
int lch;
if (cpu_class_is_omap1())
if (dma_omap1())
if (omap_lcd_dma_running())
return 1;
@ -2030,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
dma_chan = d->chan;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
dma_lch_count, GFP_KERNEL);
if (!dma_linked_lch) {
@ -2042,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
if (cpu_class_is_omap2())
if (dma_omap2plus())
omap2_disable_irq_lch(ch);
dma_chan[ch].dev_id = -1;
@ -2051,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
if (ch >= 6 && enable_1510_mode)
continue;
if (cpu_class_is_omap1()) {
if (dma_omap1()) {
/*
* request_irq() doesn't like dev_id (ie. ch) being
* zero, so we have to kludge around this.
@ -2076,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
}
}
if (cpu_class_is_omap2() && !cpu_is_omap242x())
if (d->dev_caps & IS_RW_PRIORITY)
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) {
@ -2095,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
}
}
/* reserve dma channels 0 and 1 in high security devices */
if (cpu_is_omap34xx() &&
(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
/* reserve dma channels 0 and 1 in high security devices on 34xx */
if (d->dev_caps & HS_CHANNELS_RESERVED) {
pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
@ -2124,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev)
{
int dma_irq;
if (cpu_class_is_omap2()) {
if (dma_omap2plus()) {
char irq_name[4];
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);

21
arch/arm/plat-omap/dmtimer.c
View file

@ -43,10 +43,6 @@
#include <plat/dmtimer.h>
#include <mach/hardware.h>
#include "../mach-omap2/omap-pm.h"
static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);
@ -272,7 +268,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
#include <mach/hardware.h>
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
* @inputmask: current value of idlect mask
@ -349,7 +345,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer)
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
if (timer->get_context_loss_count &&
timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@ -378,9 +375,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer)
__omap_dm_timer_stop(timer, timer->posted, rate);
if (!(timer->capability & OMAP_TIMER_ALWON))
timer->ctx_loss_count =
omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
if (timer->get_context_loss_count)
timer->ctx_loss_count =
timer->get_context_loss_count(&timer->pdev->dev);
}
/*
* Since the register values are computed and written within
@ -496,7 +495,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
if (timer->get_context_loss_count &&
timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@ -730,6 +730,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->pdev = pdev;
timer->capability = pdata->timer_capability;
timer->get_context_loss_count = pdata->get_context_loss_count;
/* Skip pm_runtime_enable for OMAP1 */
if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {

1
arch/arm/plat-omap/fb.c
View file

@ -30,7 +30,6 @@
#include <linux/io.h>
#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <plat/cpu.h>

30
arch/arm/plat-omap/i2c.c
View file

@ -31,34 +31,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <mach/irqs.h>
#include "../mach-omap1/soc.h"
#include "../mach-omap2/soc.h"
#include "i2c.h"
#include <plat/i2c.h>
#define OMAP_I2C_MAX_CONTROLLERS 4
static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
static int __init omap_i2c_nr_ports(void)
{
int ports = 0;
if (cpu_class_is_omap1())
ports = 1;
else if (cpu_is_omap24xx())
ports = 2;
else if (cpu_is_omap34xx())
ports = 3;
else if (cpu_is_omap44xx())
ports = 4;
return ports;
}
/**
* omap_i2c_bus_setup - Process command line options for the I2C bus speed
* @str: String of options
@ -72,12 +51,11 @@ static int __init omap_i2c_nr_ports(void)
*/
static int __init omap_i2c_bus_setup(char *str)
{
int ports;
int ints[3];
ports = omap_i2c_nr_ports();
get_options(str, 3, ints);
if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
if (ints[0] < 2 || ints[1] < 1 ||
ints[1] > OMAP_I2C_MAX_CONTROLLERS)
return 0;
i2c_pdata[ints[1] - 1].clkrate = ints[2];
i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
@ -122,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
{
int err;
BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
if (info) {
err = i2c_register_board_info(bus_id, info, len);

20
arch/arm/plat-omap/include/plat-omap/dma-omap.h
View file

@ -130,10 +130,12 @@
#define SRC_PORT BIT(0x7)
#define DST_PORT BIT(0x8)
#define SRC_INDEX BIT(0x9)
#define DST_INDEX BIT(0xA)
#define IS_BURST_ONLY4 BIT(0xB)
#define CLEAR_CSR_ON_READ BIT(0xC)
#define IS_WORD_16 BIT(0xD)
#define DST_INDEX BIT(0xa)
#define IS_BURST_ONLY4 BIT(0xb)
#define CLEAR_CSR_ON_READ BIT(0xc)
#define IS_WORD_16 BIT(0xd)
#define ENABLE_16XX_MODE BIT(0xe)
#define HS_CHANNELS_RESERVED BIT(0xf)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
@ -270,7 +272,15 @@ struct omap_system_dma_plat_info {
u32 (*dma_read)(int reg, int lch);
};
extern void __init omap_init_consistent_dma_size(void);
#ifdef CONFIG_ARCH_OMAP2PLUS
#define dma_omap2plus() 1
#else
#define dma_omap2plus() 0
#endif
#define dma_omap1() (!dma_omap2plus())
#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE)))
#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE)))
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),

1
arch/arm/plat-omap/include/plat/counter-32k.h Normal file
View file

@ -0,0 +1 @@
int omap_init_clocksource_32k(void __iomem *vbase);

2
arch/arm/plat-omap/include/plat/cpu.h
View file

@ -29,7 +29,7 @@
#define __ASM_ARCH_OMAP_CPU_H
#ifdef CONFIG_ARCH_OMAP1
#include "../../mach-omap1/soc.h"
#include <mach/soc.h>
#endif
#ifdef CONFIG_ARCH_OMAP2PLUS

7
arch/arm/mach-omap2/debug-devices.h → arch/arm/plat-omap/include/plat/debug-devices.h
View file

@ -1,9 +1,2 @@
#ifndef _OMAP_DEBUG_DEVICES_H
#define _OMAP_DEBUG_DEVICES_H
#include <linux/types.h>
/* for TI reference platforms sharing the same debug card */
extern int debug_card_init(u32 addr, unsigned gpio);
#endif

2
arch/arm/plat-omap/include/plat/dmtimer.h
View file

@ -94,6 +94,7 @@ struct dmtimer_platform_data {
/* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
u32 timer_capability;
int (*get_context_loss_count)(struct device *);
};
int omap_dm_timer_reserve_systimer(int id);
@ -263,6 +264,7 @@ struct omap_dm_timer {
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
int (*get_context_loss_count)(struct device *);
int ctx_loss_count;
int revision;
u32 capability;

0
arch/arm/plat-omap/i2c.h → arch/arm/plat-omap/include/plat/i2c.h
View file

16
arch/arm/plat-omap/include/plat/sram.h Normal file
View file

@ -0,0 +1,16 @@
int omap_sram_init(void);
void omap_map_sram(unsigned long start, unsigned long size,
unsigned long skip, int cached);
void omap_sram_reset(void);
extern void *omap_sram_push_address(unsigned long size);
/* Macro to push a function to the internal SRAM, using the fncpy API */
#define omap_sram_push(funcp, size) ({ \
typeof(&(funcp)) _res = NULL; \
void *_sram_address = omap_sram_push_address(size); \
if (_sram_address) \
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})

370
arch/arm/plat-omap/sram.c
View file

@ -20,197 +20,19 @@
#include <linux/init.h>
#include <linux/io.h>
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "../mach-omap1/soc.h"
#include "../mach-omap2/soc.h"
#include "sram.h"
/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
#include "../mach-omap2/iomap.h"
#include "../mach-omap2/prm2xxx_3xxx.h"
#include "../mach-omap2/sdrc.h"
#define OMAP1_SRAM_PA 0x20000000
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#ifdef CONFIG_OMAP4_ERRATA_I688
#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
#else
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#endif
#define OMAP5_SRAM_PA 0x40300000
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
#endif
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
#define GP_DEVICE 0x300
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
* SRAM varies. The default accessible size for all device types is 2k. A GP
* device allows ARM11 but not other initiators for full size. This
* functionality seems ok until some nice security API happens.
*/
static int is_sram_locked(void)
{
if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
if (cpu_is_omap242x()) {
__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
if (cpu_is_omap34xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
}
return 0;
} else
return 1; /* assume locked with no PPA or security driver */
}
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_sram(void)
{
omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else if (soc_is_omap54xx()) {
omap_sram_start = OMAP5_SRAM_PA;
omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (soc_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else if (soc_is_omap54xx()) {
omap_sram_start = OMAP5_SRAM_PA;
omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
else if (cpu_is_omap243x())
omap_sram_size = 0x10000; /* 64K */
}
}
} else {
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1611() ||
cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
}
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap_map_sram(void)
{
int cached = 1;
if (omap_sram_size == 0)
return;
#ifdef CONFIG_OMAP4_ERRATA_I688
if (cpu_is_omap44xx()) {
omap_sram_start += PAGE_SIZE;
omap_sram_size -= SZ_16K;
}
#endif
if (cpu_is_omap34xx()) {
/*
* SRAM must be marked as non-cached on OMAP3 since the
* CORE DPLL M2 divider change code (in SRAM) runs with the
* SDRAM controller disabled, and if it is marked cached,
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
cached = 0;
}
omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
cached);
if (!omap_sram_base) {
pr_err("SRAM: Could not map\n");
return;
}
omap_sram_ceil = omap_sram_base + omap_sram_size;
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
memset_io(omap_sram_base + omap_sram_skip, 0,
omap_sram_size - omap_sram_skip);
}
/*
* Memory allocator for SRAM: calculates the new ceiling address
* for pushing a function using the fncpy API.
@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size)
return (void *)omap_sram_ceil;
}
#ifdef CONFIG_ARCH_OMAP1
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
BUG_ON(!_omap_sram_reprogram_clock);
/* On 730, bit 13 must always be 1 */
if (cpu_is_omap7xx())
ckctl |= 0x2000;
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
static int __init omap1_sram_init(void)
{
_omap_sram_reprogram_clock =
omap_sram_push(omap1_sram_reprogram_clock,
omap1_sram_reprogram_clock_sz);
return 0;
}
#else
#define omap1_sram_init() do {} while (0)
#endif
#if defined(CONFIG_ARCH_OMAP2)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
u32 mem_type);
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#endif
#ifdef CONFIG_SOC_OMAP2420
static int __init omap242x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
omap242x_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
omap242x_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
omap242x_sram_set_prcm_sz);
return 0;
}
#else
static inline int omap242x_sram_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_SOC_OMAP2430
static int __init omap243x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
omap243x_sram_ddr_init_sz);
_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
omap243x_sram_reprogram_sdrc_sz);
_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
omap243x_sram_set_prcm_sz);
return 0;
}
#else
static inline int omap243x_sram_init(void)
{
return 0;
}
#endif
#ifdef CONFIG_ARCH_OMAP3
static u32 (*_omap3_sram_configure_core_dpll)(
u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(
m2, unlock_dll, f, inc,
sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
sdrc_actim_ctrl_b_0, sdrc_mr_0,
sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
void omap3_sram_restore_context(void)
/*
* The SRAM context is lost during off-idle and stack
* needs to be reset.
*/
void omap_sram_reset(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
_omap3_sram_configure_core_dpll =
omap_sram_push(omap3_sram_configure_core_dpll,
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
static inline int omap34xx_sram_init(void)
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
void __init omap_map_sram(unsigned long start, unsigned long size,
unsigned long skip, int cached)
{
omap3_sram_restore_context();
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
if (size == 0)
return;
static inline int am33xx_sram_init(void)
{
return 0;
}
int __init omap_sram_init(void)
{
omap_detect_sram();
omap_map_sram();
if (!(cpu_class_is_omap2()))
omap1_sram_init();
else if (cpu_is_omap242x())
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
else if (soc_is_am33xx())
am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
return 0;
start = ROUND_DOWN(start, PAGE_SIZE);
omap_sram_size = size;
omap_sram_skip = skip;
omap_sram_base = __arm_ioremap_exec(start, size, cached);
if (!omap_sram_base) {
pr_err("SRAM: Could not map\n");
return;
}
omap_sram_reset();
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
memset_io(omap_sram_base + omap_sram_skip, 0,
omap_sram_size - omap_sram_skip);
}

6
drivers/dma/omap-dma.c
View file

@ -21,12 +21,6 @@
#include <plat-omap/dma-omap.h>
#ifdef CONFIG_ARCH_OMAP2PLUS
#define dma_omap2plus() 1
#else
#define dma_omap2plus() 0
#endif
struct omap_dmadev {
struct dma_device ddev;
spinlock_t lock;

1
drivers/media/platform/omap3isp/ispvideo.c
View file

@ -36,7 +36,6 @@
#include <media/v4l2-ioctl.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
#include <plat/omap-pm.h>
#include "ispvideo.h"
#include "isp.h"

1
include/linux/platform_data/gpio-omap.h
View file

@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#define OMAP1_MPUIO_BASE 0xfffb5000

2
sound/soc/omap/am3517evm.c
View file

@ -25,8 +25,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"

1
sound/soc/omap/n810.c
View file

@ -29,7 +29,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>

1
sound/soc/omap/osk5912.c
View file

@ -28,7 +28,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>

2
sound/soc/omap/sdp3430.c
View file

@ -31,8 +31,6 @@
#include <sound/jack.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>

3
sound/soc/omap/zoom2.c
View file

@ -26,9 +26,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/board-zoom.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
/* Register descriptions for twl4030 codec part */