redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

md: add sysfs entries for PPL 

Add 'consistency_policy' attribute for array. It indicates how the array
maintains consistency in case of unexpected shutdown.

Add 'ppl_sector' and 'ppl_size' for rdev, which describe the location
and size of the PPL space on the device. They can't be changed for
active members if the array is started and PPL is enabled, so in the
setter functions only basic checks are performed. More checks are done
in ppl_validate_rdev() when starting the log.

These attributes are writable to allow enabling PPL for external
metadata arrays and (later) to enable/disable PPL for a running array.

Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
zero-colors
Artur Paszkiewicz 2017-03-09 10:00:00 +01:00 committed by Shaohua Li
parent 3418d036c8
commit 664aed0444
2 changed files with 144 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Documentation/admin-guide/md.rst
View File

@ -276,14 +276,14 @@ All md devices contain:
array creation it will default to 0, though starting the array as
``clean`` will set it much larger.
new_dev
new_dev
This file can be written but not read. The value written should
be a block device number as major:minor. e.g. 8:0
This will cause that device to be attached to the array, if it is
available. It will then appear at md/dev-XXX (depending on the
name of the device) and further configuration is then possible.
safe_mode_delay
safe_mode_delay
When an md array has seen no write requests for a certain period
of time, it will be marked as ``clean``. When another write
request arrives, the array is marked as ``dirty`` before the write
@ -292,7 +292,7 @@ All md devices contain:
period as a number of seconds. The default is 200msec (0.200).
Writing a value of 0 disables safemode.
array_state
array_state
This file contains a single word which describes the current
state of the array. In many cases, the state can be set by
writing the word for the desired state, however some states
@ -401,7 +401,30 @@ All md devices contain:
once the array becomes non-degraded, and this fact has been
recorded in the metadata.
consistency_policy
This indicates how the array maintains consistency in case of unexpected
shutdown. It can be:
none
Array has no redundancy information, e.g. raid0, linear.
resync
Full resync is performed and all redundancy is regenerated when the
array is started after unclean shutdown.
bitmap
Resync assisted by a write-intent bitmap.
journal
For raid4/5/6, journal device is used to log transactions and replay
after unclean shutdown.
ppl
For raid5 only, Partial Parity Log is used to close the write hole and
eliminate resync.
The accepted values when writing to this file are ``ppl`` and ``resync``,
used to enable and disable PPL.
As component devices are added to an md array, they appear in the ``md``
@ -563,6 +586,9 @@ Each directory contains:
adds bad blocks without acknowledging them. This is largely
for testing.
ppl_sector, ppl_size
Location and size (in sectors) of the space used for Partial Parity Log
on this device.
An active md device will also contain an entry for each active device

115
drivers/md/md.c
View File

@ -3150,6 +3150,78 @@ static ssize_t ubb_store(struct md_rdev *rdev, const char *page, size_t len)
static struct rdev_sysfs_entry rdev_unack_bad_blocks =
__ATTR(unacknowledged_bad_blocks, S_IRUGO|S_IWUSR, ubb_show, ubb_store);
static ssize_t
ppl_sector_show(struct md_rdev *rdev, char *page)
{
return sprintf(page, "%llu\n", (unsigned long long)rdev->ppl.sector);
}
static ssize_t
ppl_sector_store(struct md_rdev *rdev, const char *buf, size_t len)
{
unsigned long long sector;
if (kstrtoull(buf, 10, &sector) < 0)
return -EINVAL;
if (sector != (sector_t)sector)
return -EINVAL;
if (rdev->mddev->pers && test_bit(MD_HAS_PPL, &rdev->mddev->flags) &&
rdev->raid_disk >= 0)
return -EBUSY;
if (rdev->mddev->persistent) {
if (rdev->mddev->major_version == 0)
return -EINVAL;
if ((sector > rdev->sb_start &&
sector - rdev->sb_start > S16_MAX) ||
(sector < rdev->sb_start &&
rdev->sb_start - sector > -S16_MIN))
return -EINVAL;
rdev->ppl.offset = sector - rdev->sb_start;
} else if (!rdev->mddev->external) {
return -EBUSY;
}
rdev->ppl.sector = sector;
return len;
}
static struct rdev_sysfs_entry rdev_ppl_sector =
__ATTR(ppl_sector, S_IRUGO|S_IWUSR, ppl_sector_show, ppl_sector_store);
static ssize_t
ppl_size_show(struct md_rdev *rdev, char *page)
{
return sprintf(page, "%u\n", rdev->ppl.size);
}
static ssize_t
ppl_size_store(struct md_rdev *rdev, const char *buf, size_t len)
{
unsigned int size;
if (kstrtouint(buf, 10, &size) < 0)
return -EINVAL;
if (rdev->mddev->pers && test_bit(MD_HAS_PPL, &rdev->mddev->flags) &&
rdev->raid_disk >= 0)
return -EBUSY;
if (rdev->mddev->persistent) {
if (rdev->mddev->major_version == 0)
return -EINVAL;
if (size > U16_MAX)
return -EINVAL;
} else if (!rdev->mddev->external) {
return -EBUSY;
}
rdev->ppl.size = size;
return len;
}
static struct rdev_sysfs_entry rdev_ppl_size =
__ATTR(ppl_size, S_IRUGO|S_IWUSR, ppl_size_show, ppl_size_store);
static struct attribute *rdev_default_attrs[] = {
&rdev_state.attr,
&rdev_errors.attr,
@ -3160,6 +3232,8 @@ static struct attribute *rdev_default_attrs[] = {
&rdev_recovery_start.attr,
&rdev_bad_blocks.attr,
&rdev_unack_bad_blocks.attr,
&rdev_ppl_sector.attr,
&rdev_ppl_size.attr,
NULL,
};
static ssize_t
@ -4896,6 +4970,46 @@ static struct md_sysfs_entry md_array_size =
__ATTR(array_size, S_IRUGO|S_IWUSR, array_size_show,
array_size_store);
static ssize_t
consistency_policy_show(struct mddev *mddev, char *page)
{
int ret;
if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
ret = sprintf(page, "journal\n");
} else if (test_bit(MD_HAS_PPL, &mddev->flags)) {
ret = sprintf(page, "ppl\n");
} else if (mddev->bitmap) {
ret = sprintf(page, "bitmap\n");
} else if (mddev->pers) {
if (mddev->pers->sync_request)
ret = sprintf(page, "resync\n");
else
ret = sprintf(page, "none\n");
} else {
ret = sprintf(page, "unknown\n");
}
return ret;
}
static ssize_t
consistency_policy_store(struct mddev *mddev, const char *buf, size_t len)
{
if (mddev->pers) {
return -EBUSY;
} else if (mddev->external && strncmp(buf, "ppl", 3) == 0) {
set_bit(MD_HAS_PPL, &mddev->flags);
return len;
} else {
return -EINVAL;
}
}
static struct md_sysfs_entry md_consistency_policy =
__ATTR(consistency_policy, S_IRUGO | S_IWUSR, consistency_policy_show,
consistency_policy_store);
static struct attribute *md_default_attrs[] = {
&md_level.attr,
&md_layout.attr,
@ -4911,6 +5025,7 @@ static struct attribute *md_default_attrs[] = {
&md_reshape_direction.attr,
&md_array_size.attr,
&max_corr_read_errors.attr,
&md_consistency_policy.attr,
NULL,
};