redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

[SCSI] lpfc 8.3.5: fix VPI registration, error clean up and add support for vlink events

Browse source 
This patch includes the following fixes and new features:
- Fix mask size for CT field in WQE
- Fix VPI base not used when unregistering VPI on port 1.
- Fix UNREG_VPI mailbox command to unreg the correct VPI
- Fixed Check for aborted els command
- Fix error when trying to load driver with wrong firmware on FCoE HBA.
- Fix bug with probe_one routines not putting the Scsi_Host back upon error
- Add support for Clear Virtual Link Async Events
- Add support for unsolicited CT exchange sequence abort
- Add 0x0714 OCeXXXXX PCI ID

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This commit is contained in:
James Smart 2009-10-02 15:16:45 -04:00 committed by James Bottomley
parent 4d9ab994e2
commit 6669f9bb90
11 changed files with 498 additions and 47 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
drivers/scsi/lpfc/lpfc_crtn.h
View file

@ -144,6 +144,8 @@ void lpfc_hb_timeout_handler(struct lpfc_hba *);
void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_iocbq *);
void lpfc_sli4_ct_abort_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_iocbq *);
int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t);
int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int);
void lpfc_fdmi_tmo(unsigned long);
@ -188,7 +190,7 @@ int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
void lpfc_init_vpi(struct lpfc_hba *, struct lpfcMboxq *, uint16_t);
void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
void lpfc_unreg_vfi(struct lpfcMboxq *, struct lpfc_vport *);
void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
@ -361,6 +363,7 @@ void lpfc_stop_port(struct lpfc_hba *);
void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
void lpfc_start_fdiscs(struct lpfc_hba *phba);
struct lpfc_vport *lpfc_find_vport_by_vpid(struct lpfc_hba *, uint16_t);
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define HBA_EVENT_RSCN 5

34
drivers/scsi/lpfc/lpfc_ct.c
View file

@ -87,7 +87,6 @@ void
lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *piocbq)
{
struct lpfc_dmabuf *mp = NULL;
IOCB_t *icmd = &piocbq->iocb;
int i;
@ -160,6 +159,39 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
}
/**
* lpfc_sli4_ct_abort_unsol_event - Default handle for sli4 unsol abort
* @phba: Pointer to HBA context object.
* @pring: Pointer to the driver internal I/O ring.
* @piocbq: Pointer to the IOCBQ.
*
* This function serves as the default handler for the sli4 unsolicited
* abort event. It shall be invoked when there is no application interface
* registered unsolicited abort handler. This handler does nothing but
* just simply releases the dma buffer used by the unsol abort event.
**/
void
lpfc_sli4_ct_abort_unsol_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring,
struct lpfc_iocbq *piocbq)
{
IOCB_t *icmd = &piocbq->iocb;
struct lpfc_dmabuf *bdeBuf;
uint32_t size;
/* Forward abort event to any process registered to receive ct event */
lpfc_bsg_ct_unsol_event(phba, pring, piocbq);
/* If there is no BDE associated with IOCB, there is nothing to do */
if (icmd->ulpBdeCount == 0)
return;
bdeBuf = piocbq->context2;
piocbq->context2 = NULL;
size = icmd->un.cont64[0].tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, piocbq, bdeBuf, size);
lpfc_in_buf_free(phba, bdeBuf);
}
static void
lpfc_free_ct_rsp(struct lpfc_hba *phba, struct lpfc_dmabuf *mlist)
{

12
drivers/scsi/lpfc/lpfc_els.c
View file

@ -2712,12 +2712,16 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
!lpfc_error_lost_link(irsp)) {
/* FLOGI retry policy */
retry = 1;
maxretry = 48;
if (cmdiocb->retry >= 32)
/* retry forever */
maxretry = 0;
if (cmdiocb->retry >= 100)
delay = 5000;
else if (cmdiocb->retry >= 32)
delay = 1000;
}
if ((++cmdiocb->retry) >= maxretry) {
cmdiocb->retry++;
if (maxretry && (cmdiocb->retry >= maxretry)) {
phba->fc_stat.elsRetryExceeded++;
retry = 0;
}
@ -5671,7 +5675,7 @@ dropit:
* NULL - No vport with the matching @vpi found
* Otherwise - Address to the vport with the matching @vpi.
**/
static struct lpfc_vport *
struct lpfc_vport *
lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
{
struct lpfc_vport *vport;

2
drivers/scsi/lpfc/lpfc_hbadisc.c
View file

@ -4474,7 +4474,7 @@ lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
return;
}
lpfc_unreg_vfi(mbox, phba->pport->vfi);
lpfc_unreg_vfi(mbox, phba->pport);
mbox->vport = phba->pport;
mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;

10
drivers/scsi/lpfc/lpfc_hw.h
View file

@ -1183,6 +1183,7 @@ typedef struct {
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
#define PCI_DEVICE_ID_TIGERSHARK 0x0704
#define PCI_DEVICE_ID_TS_BE3 0x0714
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
@ -1444,6 +1445,7 @@ typedef struct { /* FireFly BIU registers */
#define CMD_ABORT_MXRI64_CN 0x8C
#define CMD_RCV_ELS_REQ64_CX 0x8D
#define CMD_XMIT_ELS_RSP64_CX 0x95
#define CMD_XMIT_BLS_RSP64_CX 0x97
#define CMD_FCP_IWRITE64_CR 0x98
#define CMD_FCP_IWRITE64_CX 0x99
#define CMD_FCP_IREAD64_CR 0x9A
@ -2326,7 +2328,13 @@ typedef struct {
/* Structure for MB Command UNREG_VPI (0x97) */
typedef struct {
uint32_t rsvd1;
uint32_t rsvd2;
#ifdef __BIG_ENDIAN_BITFIELD
uint16_t rsvd2;
uint16_t sli4_vpi;
#else /* __LITTLE_ENDIAN */
uint16_t sli4_vpi;
uint16_t rsvd2;
#endif
uint32_t rsvd3;
uint32_t rsvd4;
uint32_t rsvd5;

89
drivers/scsi/lpfc/lpfc_hw4.h
View file

@ -425,7 +425,7 @@ struct lpfc_wqe_generic{
#define lpfc_wqe_gen_status_MASK 0x0000000F
#define lpfc_wqe_gen_status_WORD word7
#define lpfc_wqe_gen_ct_SHIFT 2
#define lpfc_wqe_gen_ct_MASK 0x00000007
#define lpfc_wqe_gen_ct_MASK 0x00000003
#define lpfc_wqe_gen_ct_WORD word7
uint32_t abort_tag;
uint32_t word9;
@ -760,6 +760,7 @@ struct mbox_header {
#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
/* FCoE Opcodes */
@ -1273,6 +1274,51 @@ struct lpfc_mbx_del_fcf_tbl_entry {
#define lpfc_mbx_del_fcf_tbl_index_WORD word10
};
struct lpfc_mbx_query_fw_cfg {
struct mbox_header header;
uint32_t config_number;
uint32_t asic_rev;
uint32_t phys_port;
uint32_t function_mode;
/* firmware Function Mode */
#define lpfc_function_mode_toe_SHIFT 0
#define lpfc_function_mode_toe_MASK 0x00000001
#define lpfc_function_mode_toe_WORD function_mode
#define lpfc_function_mode_nic_SHIFT 1
#define lpfc_function_mode_nic_MASK 0x00000001
#define lpfc_function_mode_nic_WORD function_mode
#define lpfc_function_mode_rdma_SHIFT 2
#define lpfc_function_mode_rdma_MASK 0x00000001
#define lpfc_function_mode_rdma_WORD function_mode
#define lpfc_function_mode_vm_SHIFT 3
#define lpfc_function_mode_vm_MASK 0x00000001
#define lpfc_function_mode_vm_WORD function_mode
#define lpfc_function_mode_iscsi_i_SHIFT 4
#define lpfc_function_mode_iscsi_i_MASK 0x00000001
#define lpfc_function_mode_iscsi_i_WORD function_mode
#define lpfc_function_mode_iscsi_t_SHIFT 5
#define lpfc_function_mode_iscsi_t_MASK 0x00000001
#define lpfc_function_mode_iscsi_t_WORD function_mode
#define lpfc_function_mode_fcoe_i_SHIFT 6
#define lpfc_function_mode_fcoe_i_MASK 0x00000001
#define lpfc_function_mode_fcoe_i_WORD function_mode
#define lpfc_function_mode_fcoe_t_SHIFT 7
#define lpfc_function_mode_fcoe_t_MASK 0x00000001
#define lpfc_function_mode_fcoe_t_WORD function_mode
#define lpfc_function_mode_dal_SHIFT 8
#define lpfc_function_mode_dal_MASK 0x00000001
#define lpfc_function_mode_dal_WORD function_mode
#define lpfc_function_mode_lro_SHIFT 9
#define lpfc_function_mode_lro_MASK 0x00000001
#define lpfc_function_mode_lro_WORD function_mode9
#define lpfc_function_mode_flex10_SHIFT 10
#define lpfc_function_mode_flex10_MASK 0x00000001
#define lpfc_function_mode_flex10_WORD function_mode
#define lpfc_function_mode_ncsi_SHIFT 11
#define lpfc_function_mode_ncsi_MASK 0x00000001
#define lpfc_function_mode_ncsi_WORD function_mode
};
/* Status field for embedded SLI_CONFIG mailbox command */
#define STATUS_SUCCESS 0x0
#define STATUS_FAILED 0x1
@ -1804,6 +1850,7 @@ struct lpfc_mqe {
struct lpfc_mbx_read_config rd_config;
struct lpfc_mbx_request_features req_ftrs;
struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
struct lpfc_mbx_query_fw_cfg query_fw_cfg;
struct lpfc_mbx_nop nop;
} un;
};
@ -1885,7 +1932,7 @@ struct lpfc_acqe_link {
};
struct lpfc_acqe_fcoe {
uint32_t fcf_index;
uint32_t index;
uint32_t word1;
#define lpfc_acqe_fcoe_fcf_count_SHIFT 0
#define lpfc_acqe_fcoe_fcf_count_MASK 0x0000FFFF
@ -1896,6 +1943,7 @@ struct lpfc_acqe_fcoe {
#define LPFC_FCOE_EVENT_TYPE_NEW_FCF 0x1
#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL 0x2
#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD 0x3
#define LPFC_FCOE_EVENT_TYPE_CVL 0x4
uint32_t event_tag;
uint32_t trailer;
};
@ -1924,9 +1972,9 @@ struct lpfc_bmbx_create {
#define NO_XRI ((uint16_t)-1)
struct wqe_common {
uint32_t word6;
#define wqe_xri_SHIFT 0
#define wqe_xri_MASK 0x0000FFFF
#define wqe_xri_WORD word6
#define wqe_xri_tag_SHIFT 0
#define wqe_xri_tag_MASK 0x0000FFFF
#define wqe_xri_tag_WORD word6
#define wqe_ctxt_tag_SHIFT 16
#define wqe_ctxt_tag_MASK 0x0000FFFF
#define wqe_ctxt_tag_WORD word6
@ -1987,7 +2035,7 @@ struct wqe_common {
#define wqe_wqec_MASK 0x00000001
#define wqe_wqec_WORD word11
#define wqe_cqid_SHIFT 16
#define wqe_cqid_MASK 0x000003ff
#define wqe_cqid_MASK 0x0000ffff
#define wqe_cqid_WORD word11
};
@ -1996,6 +2044,9 @@ struct wqe_did {
#define wqe_els_did_SHIFT 0
#define wqe_els_did_MASK 0x00FFFFFF
#define wqe_els_did_WORD word5
#define wqe_xmit_bls_pt_SHIFT 28
#define wqe_xmit_bls_pt_MASK 0x00000003
#define wqe_xmit_bls_pt_WORD word5
#define wqe_xmit_bls_ar_SHIFT 30
#define wqe_xmit_bls_ar_MASK 0x00000001
#define wqe_xmit_bls_ar_WORD word5
@ -2044,6 +2095,23 @@ struct xmit_els_rsp64_wqe {
struct xmit_bls_rsp64_wqe {
uint32_t payload0;
/* Payload0 for BA_ACC */
#define xmit_bls_rsp64_acc_seq_id_SHIFT 16
#define xmit_bls_rsp64_acc_seq_id_MASK 0x000000ff
#define xmit_bls_rsp64_acc_seq_id_WORD payload0
#define xmit_bls_rsp64_acc_seq_id_vald_SHIFT 24
#define xmit_bls_rsp64_acc_seq_id_vald_MASK 0x000000ff
#define xmit_bls_rsp64_acc_seq_id_vald_WORD payload0
/* Payload0 for BA_RJT */
#define xmit_bls_rsp64_rjt_vspec_SHIFT 0
#define xmit_bls_rsp64_rjt_vspec_MASK 0x000000ff
#define xmit_bls_rsp64_rjt_vspec_WORD payload0
#define xmit_bls_rsp64_rjt_expc_SHIFT 8
#define xmit_bls_rsp64_rjt_expc_MASK 0x000000ff
#define xmit_bls_rsp64_rjt_expc_WORD payload0
#define xmit_bls_rsp64_rjt_rsnc_SHIFT 16
#define xmit_bls_rsp64_rjt_rsnc_MASK 0x000000ff
#define xmit_bls_rsp64_rjt_rsnc_WORD payload0
uint32_t word1;
#define xmit_bls_rsp64_rxid_SHIFT 0
#define xmit_bls_rsp64_rxid_MASK 0x0000ffff
@ -2052,18 +2120,19 @@ struct xmit_bls_rsp64_wqe {
#define xmit_bls_rsp64_oxid_MASK 0x0000ffff
#define xmit_bls_rsp64_oxid_WORD word1
uint32_t word2;
#define xmit_bls_rsp64_seqcntlo_SHIFT 0
#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
#define xmit_bls_rsp64_seqcntlo_WORD word2
#define xmit_bls_rsp64_seqcnthi_SHIFT 16
#define xmit_bls_rsp64_seqcnthi_SHIFT 0
#define xmit_bls_rsp64_seqcnthi_MASK 0x0000ffff
#define xmit_bls_rsp64_seqcnthi_WORD word2
#define xmit_bls_rsp64_seqcntlo_SHIFT 16
#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
#define xmit_bls_rsp64_seqcntlo_WORD word2
uint32_t rsrvd3;
uint32_t rsrvd4;
struct wqe_did wqe_dest;
struct wqe_common wqe_com; /* words 6-11 */
uint32_t rsvd_12_15[4];
};
struct wqe_rctl_dfctl {
uint32_t word5;
#define wqe_si_SHIFT 2

107
drivers/scsi/lpfc/lpfc_init.c
View file

@ -1669,6 +1669,10 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
oneConnect = 1;
m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_TS_BE3:
oneConnect = 1;
m = (typeof(m)) {"OCeXXXXX-F", max_speed, "PCIe"};
break;
default:
m = (typeof(m)){ NULL };
break;
@ -2698,6 +2702,63 @@ lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
mempool_free(mboxq, phba->mbox_mem_pool);
}
/**
* lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
* @phba: pointer to lpfc hba data structure.
*
* This function uses the QUERY_FW_CFG mailbox command to determine if the
* firmware loaded supports FCoE. A return of zero indicates that the mailbox
* was successful and the firmware supports FCoE. Any other return indicates
* a error. It is assumed that this function will be called before interrupts
* are enabled.
**/
static int
lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
{
int rc = 0;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
uint32_t length;
uint32_t shdr_status, shdr_add_status;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2621 Failed to allocate mbox for "
"query firmware config cmd\n");
return -ENOMEM;
}
query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
sizeof(struct lpfc_sli4_cfg_mhdr));
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_QUERY_FW_CFG,
length, LPFC_SLI4_MBX_EMBED);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
/* The IOCTL status is embedded in the mailbox subheader. */
shdr_status = bf_get(lpfc_mbox_hdr_status,
&query_fw_cfg->header.cfg_shdr.response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&query_fw_cfg->header.cfg_shdr.response);
if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2622 Query Firmware Config failed "
"mbx status x%x, status x%x add_status x%x\n",
rc, shdr_status, shdr_add_status);
return -EINVAL;
}
if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2623 FCoE Function not supported by firmware. "
"Function mode = %08x\n",
query_fw_cfg->function_mode);
return -EINVAL;
}
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
return 0;
}
/**
* lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
* @phba: pointer to lpfc hba data structure.
@ -2918,6 +2979,9 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
{
uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
int rc;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
@ -2925,7 +2989,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2546 New FCF found index 0x%x tag 0x%x\n",
acqe_fcoe->fcf_index,
acqe_fcoe->index,
acqe_fcoe->event_tag);
/*
* If the current FCF is in discovered state, or
@ -2958,10 +3022,10 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2549 FCF disconnected fron network index 0x%x"
" tag 0x%x\n", acqe_fcoe->fcf_index,
" tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
/* If the event is not for currently used fcf do nothing */
if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
if (phba->fcf.fcf_indx != acqe_fcoe->index)
break;
/*
* Currently, driver support only one FCF - so treat this as
@ -2971,7 +3035,28 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
case LPFC_FCOE_EVENT_TYPE_CVL:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
vport = lpfc_find_vport_by_vpid(phba,
acqe_fcoe->index /*- phba->vpi_base*/);
if (!vport)
break;
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp)
break;
shost = lpfc_shost_from_vport(vport);
lpfc_linkdown_port(vport);
if (vport->port_type != LPFC_NPIV_PORT) {
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_DELAY_TMO;
spin_unlock_irq(shost->host_lock);
ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
vport->port_state = LPFC_FLOGI;
}
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0288 Unknown FCoE event type 0x%x event tag "
@ -3463,6 +3548,10 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
if (unlikely(rc))
goto out_free_bsmbx;
rc = lpfc_sli4_fw_cfg_check(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* Set up the hba's configuration parameters. */
rc = lpfc_sli4_read_config(phba);
if (unlikely(rc))
@ -6687,6 +6776,7 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
@ -6765,6 +6855,7 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
goto out_destroy_shost;
}
shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
@ -6831,6 +6922,8 @@ out_unset_pci_mem_s3:
lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
if (shost)
scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
@ -7214,6 +7307,7 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
int mcnt;
@ -7294,6 +7388,7 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
goto out_destroy_shost;
}
shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
@ -7362,6 +7457,8 @@ out_unset_pci_mem_s4:
lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
if (shost)
scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
@ -7936,6 +8033,8 @@ static struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TS_BE3,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};

12
drivers/scsi/lpfc/lpfc_mbox.c
View file

@ -849,7 +849,10 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
if (phba->sli_rev < LPFC_SLI_REV4)
mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
else
mb->un.varUnregVpi.sli4_vpi = vpi + phba->vpi_base;
mb->mbxCommand = MBX_UNREG_VPI;
mb->mbxOwner = OWN_HOST;
@ -1850,7 +1853,7 @@ lpfc_init_vpi(struct lpfc_hba *phba, struct lpfcMboxq *mbox, uint16_t vpi)
/**
* lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
* @mbox: pointer to lpfc mbox command to initialize.
* @vfi: VFI to be unregistered.
* @vport: vport associated with the VF.
*
* The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
* (logical NPort) into the inactive state. The SLI Host must have logged out
@ -1859,11 +1862,12 @@ lpfc_init_vpi(struct lpfc_hba *phba, struct lpfcMboxq *mbox, uint16_t vpi)
* fabric inactive.
**/
void
lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
lpfc_unreg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
{
memset(mbox, 0, sizeof(*mbox));
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi,
vport->vfi + vport->phba->vfi_base);
}
/**

267
drivers/scsi/lpfc/lpfc_sli.c
View file

@ -59,7 +59,8 @@ static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
uint32_t);
static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
uint8_t *, uint32_t *);
static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *,
struct hbq_dmabuf *);
static IOCB_t *
lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
{
@ -572,9 +573,9 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
if (sglq) {
if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
|| ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
&& ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
&& (iocbq->iocb.un.ulpWord[4]
== IOERR_SLI_ABORTED))) {
== IOERR_ABORT_REQUESTED))) {
spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
iflag);
list_add(&sglq->list,
@ -767,6 +768,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
case CMD_CLOSE_XRI_CX:
case CMD_XRI_ABORTED_CX:
case CMD_ABORT_MXRI64_CN:
case CMD_XMIT_BLS_RSP64_CX:
type = LPFC_ABORT_IOCB;
break;
case CMD_RCV_SEQUENCE_CX:
@ -6081,6 +6083,23 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
command_type = OTHER_COMMAND;
xritag = 0;
break;
case CMD_XMIT_BLS_RSP64_CX:
/* As BLS ABTS-ACC WQE is very different from other WQEs,
* we re-construct this WQE here based on information in
* iocbq from scratch.
*/
memset(wqe, 0, sizeof(union lpfc_wqe));
bf_set(xmit_bls_rsp64_oxid, &wqe->xmit_bls_rsp,
iocbq->iocb.un.ulpWord[3]);
bf_set(xmit_bls_rsp64_rxid, &wqe->xmit_bls_rsp,
iocbq->sli4_xritag);
bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
iocbq->iocb.ulpContext);
/* Overwrite the pre-set comnd type with OTHER_COMMAND */
command_type = OTHER_COMMAND;
break;
case CMD_XRI_ABORTED_CX:
case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
/* words0-2 are all 0's no bde */
@ -6139,7 +6158,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
if (piocb->sli4_xritag == NO_XRI) {
if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
sglq = NULL;
else {
sglq = __lpfc_sli_get_sglq(phba);
@ -6464,7 +6483,7 @@ lpfc_sli_setup(struct lpfc_hba *phba)
pring->iotag_max = 4096;
pring->lpfc_sli_rcv_async_status =
lpfc_sli_async_event_handler;
pring->num_mask = 4;
pring->num_mask = LPFC_MAX_RING_MASK;
pring->prt[0].profile = 0; /* Mask 0 */
pring->prt[0].rctl = FC_ELS_REQ;
pring->prt[0].type = FC_ELS_DATA;
@ -6489,6 +6508,12 @@ lpfc_sli_setup(struct lpfc_hba *phba)
pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
pring->prt[3].lpfc_sli_rcv_unsol_event =
lpfc_ct_unsol_event;
/* abort unsolicited sequence */
pring->prt[4].profile = 0; /* Mask 4 */
pring->prt[4].rctl = FC_RCTL_BA_ABTS;
pring->prt[4].type = FC_TYPE_BLS;
pring->prt[4].lpfc_sli_rcv_unsol_event =
lpfc_sli4_ct_abort_unsol_event;
break;
}
totiocbsize += (pring->numCiocb * pring->sizeCiocb) +
@ -10869,6 +10894,177 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
return NULL;
}
/**
* lpfc_sli4_abort_partial_seq - Abort partially assembled unsol sequence
* @vport: pointer to a vitural port
* @dmabuf: pointer to a dmabuf that describes the FC sequence
*
* This function tries to abort from the partially assembed sequence, described
* by the information from basic abbort @dmabuf. It checks to see whether such
* partially assembled sequence held by the driver. If so, it shall free up all
* the frames from the partially assembled sequence.
*
* Return
* true -- if there is matching partially assembled sequence present and all
* the frames freed with the sequence;
* false -- if there is no matching partially assembled sequence present so
* nothing got aborted in the lower layer driver
**/
static bool
lpfc_sli4_abort_partial_seq(struct lpfc_vport *vport,
struct hbq_dmabuf *dmabuf)
{
struct fc_frame_header *new_hdr;
struct fc_frame_header *temp_hdr;
struct lpfc_dmabuf *d_buf, *n_buf, *h_buf;
struct hbq_dmabuf *seq_dmabuf = NULL;
/* Use the hdr_buf to find the sequence that matches this frame */
INIT_LIST_HEAD(&dmabuf->dbuf.list);
INIT_LIST_HEAD(&dmabuf->hbuf.list);
new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
temp_hdr = (struct fc_frame_header *)h_buf->virt;
if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
(temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
(memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
continue;
/* found a pending sequence that matches this frame */
seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
break;
}
/* Free up all the frames from the partially assembled sequence */
if (seq_dmabuf) {
list_for_each_entry_safe(d_buf, n_buf,
&seq_dmabuf->dbuf.list, list) {
list_del_init(&d_buf->list);
lpfc_in_buf_free(vport->phba, d_buf);
}
return true;
}
return false;
}
/**
* lpfc_sli4_seq_abort_acc_cmpl - Accept seq abort iocb complete handler
* @phba: Pointer to HBA context object.
* @cmd_iocbq: pointer to the command iocbq structure.
* @rsp_iocbq: pointer to the response iocbq structure.
*
* This function handles the sequence abort accept iocb command complete
* event. It properly releases the memory allocated to the sequence abort
* accept iocb.
**/
static void
lpfc_sli4_seq_abort_acc_cmpl(struct lpfc_hba *phba,
struct lpfc_iocbq *cmd_iocbq,
struct lpfc_iocbq *rsp_iocbq)
{
if (cmd_iocbq)
lpfc_sli_release_iocbq(phba, cmd_iocbq);
}
/**
* lpfc_sli4_seq_abort_acc - Accept sequence abort
* @phba: Pointer to HBA context object.
* @fc_hdr: pointer to a FC frame header.
*
* This function sends a basic accept to a previous unsol sequence abort
* event after aborting the sequence handling.
**/
static void
lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
struct fc_frame_header *fc_hdr)
{
struct lpfc_iocbq *ctiocb = NULL;
struct lpfc_nodelist *ndlp;
uint16_t oxid;
uint32_t sid;
IOCB_t *icmd;
if (!lpfc_is_link_up(phba))
return;
sid = sli4_sid_from_fc_hdr(fc_hdr);
oxid = be16_to_cpu(fc_hdr->fh_ox_id);
ndlp = lpfc_findnode_did(phba->pport, sid);
if (!ndlp) {
lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
"1268 Find ndlp returned NULL for oxid:x%x "
"SID:x%x\n", oxid, sid);
return;
}
/* Allocate buffer for acc iocb */
ctiocb = lpfc_sli_get_iocbq(phba);
if (!ctiocb)
return;
icmd = &ctiocb->iocb;
icmd->un.xseq64.bdl.ulpIoTag32 = 0;
icmd->un.xseq64.bdl.bdeSize = 0;
icmd->un.xseq64.w5.hcsw.Dfctl = 0;
icmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_BA_ACC;
icmd->un.xseq64.w5.hcsw.Type = FC_TYPE_BLS;
/* Fill in the rest of iocb fields */
icmd->ulpCommand = CMD_XMIT_BLS_RSP64_CX;
icmd->ulpBdeCount = 0;
icmd->ulpLe = 1;
icmd->ulpClass = CLASS3;
icmd->ulpContext = ndlp->nlp_rpi;
icmd->un.ulpWord[3] = oxid;
ctiocb->sli4_xritag = NO_XRI;
ctiocb->iocb_cmpl = NULL;
ctiocb->vport = phba->pport;
ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_acc_cmpl;
/* Xmit CT abts accept on exchange <xid> */
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
"1200 Xmit CT ABTS ACC on exchange x%x Data: x%x\n",
CMD_XMIT_BLS_RSP64_CX, phba->link_state);
lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0);
}
/**
* lpfc_sli4_handle_unsol_abort - Handle sli-4 unsolicited abort event
* @vport: Pointer to the vport on which this sequence was received
* @dmabuf: pointer to a dmabuf that describes the FC sequence
*
* This function handles an SLI-4 unsolicited abort event. If the unsolicited
* receive sequence is only partially assembed by the driver, it shall abort
* the partially assembled frames for the sequence. Otherwise, if the
* unsolicited receive sequence has been completely assembled and passed to
* the Upper Layer Protocol (UPL), it then mark the per oxid status for the
* unsolicited sequence has been aborted. After that, it will issue a basic
* accept to accept the abort.
**/
void
lpfc_sli4_handle_unsol_abort(struct lpfc_vport *vport,
struct hbq_dmabuf *dmabuf)
{
struct lpfc_hba *phba = vport->phba;
struct fc_frame_header fc_hdr;
bool abts_par;
/* Try to abort partially assembled seq */
abts_par = lpfc_sli4_abort_partial_seq(vport, dmabuf);
/* Make a copy of fc_hdr before the dmabuf being released */
memcpy(&fc_hdr, dmabuf->hbuf.virt, sizeof(struct fc_frame_header));
/* Send abort to ULP if partially seq abort failed */
if (abts_par == false)
lpfc_sli4_send_seq_to_ulp(vport, dmabuf);
else
lpfc_in_buf_free(phba, &dmabuf->dbuf);
/* Send basic accept (BA_ACC) to the abort requester */
lpfc_sli4_seq_abort_acc(phba, &fc_hdr);
}
/**
* lpfc_seq_complete - Indicates if a sequence is complete
* @dmabuf: pointer to a dmabuf that describes the FC sequence
@ -10941,9 +11137,7 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
/* remove from receive buffer list */
list_del_init(&seq_dmabuf->hbuf.list);
/* get the Remote Port's SID */
sid = (fc_hdr->fh_s_id[0] << 16 |
fc_hdr->fh_s_id[1] << 8 |
fc_hdr->fh_s_id[2]);
sid = sli4_sid_from_fc_hdr(fc_hdr);
/* Get an iocbq struct to fill in. */
first_iocbq = lpfc_sli_get_iocbq(vport->phba);
if (first_iocbq) {
@ -11010,6 +11204,43 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
return first_iocbq;
}
static void
lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport,
struct hbq_dmabuf *seq_dmabuf)
{
struct fc_frame_header *fc_hdr;
struct lpfc_iocbq *iocbq, *curr_iocb, *next_iocb;
struct lpfc_hba *phba = vport->phba;
fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
iocbq = lpfc_prep_seq(vport, seq_dmabuf);
if (!iocbq) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2707 Ring %d handler: Failed to allocate "
"iocb Rctl x%x Type x%x received\n",
LPFC_ELS_RING,
fc_hdr->fh_r_ctl, fc_hdr->fh_type);
return;
}
if (!lpfc_complete_unsol_iocb(phba,
&phba->sli.ring[LPFC_ELS_RING],
iocbq, fc_hdr->fh_r_ctl,
fc_hdr->fh_type))
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"2540 Ring %d handler: unexpected Rctl "
"x%x Type x%x received\n",
LPFC_ELS_RING,
fc_hdr->fh_r_ctl, fc_hdr->fh_type);
/* Free iocb created in lpfc_prep_seq */
list_for_each_entry_safe(curr_iocb, next_iocb,
&iocbq->list, list) {
list_del_init(&curr_iocb->list);
lpfc_sli_release_iocbq(phba, curr_iocb);
}
lpfc_sli_release_iocbq(phba, iocbq);
}
/**
* lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
* @phba: Pointer to HBA context object.
@ -11030,7 +11261,6 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
struct fc_frame_header *fc_hdr;
struct lpfc_vport *vport;
uint32_t fcfi;
struct lpfc_iocbq *iocbq;
/* Clear hba flag and get all received buffers into the cmplq */
spin_lock_irq(&phba->hbalock);
@ -11051,6 +11281,12 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
lpfc_in_buf_free(phba, &dmabuf->dbuf);
return;
}
/* Handle the basic abort sequence (BA_ABTS) event */
if (fc_hdr->fh_r_ctl == FC_RCTL_BA_ABTS) {
lpfc_sli4_handle_unsol_abort(vport, dmabuf);
return;
}
/* Link this frame */
seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
if (!seq_dmabuf) {
@ -11068,17 +11304,8 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
dmabuf->tag = -1;
return;
}
fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
iocbq = lpfc_prep_seq(vport, seq_dmabuf);
if (!lpfc_complete_unsol_iocb(phba,
&phba->sli.ring[LPFC_ELS_RING],
iocbq, fc_hdr->fh_r_ctl,
fc_hdr->fh_type))
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"2540 Ring %d handler: unexpected Rctl "
"x%x Type x%x received\n",
LPFC_ELS_RING,
fc_hdr->fh_r_ctl, fc_hdr->fh_type);
/* Send the complete sequence to the upper layer protocol */
lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
}
/**

2
drivers/scsi/lpfc/lpfc_sli.h
View file

@ -113,7 +113,7 @@ typedef struct lpfcMboxq {
return */
#define MBX_NOWAIT 2 /* issue command then return immediately */
#define LPFC_MAX_RING_MASK 4 /* max num of rctl/type masks allowed per
#define LPFC_MAX_RING_MASK 5 /* max num of rctl/type masks allowed per
ring */
#define LPFC_MAX_RING 4 /* max num of SLI rings used by driver */

5
drivers/scsi/lpfc/lpfc_sli4.h
View file

@ -58,6 +58,11 @@
#define LPFC_FCOE_FKA_ADV_PER 0
#define LPFC_FCOE_FIP_PRIORITY 0x80
#define sli4_sid_from_fc_hdr(fc_hdr) \
((fc_hdr)->fh_s_id[0] << 16 | \
(fc_hdr)->fh_s_id[1] << 8 | \
(fc_hdr)->fh_s_id[2])
enum lpfc_sli4_queue_type {
LPFC_EQ,
LPFC_GCQ,