[ARM] 3604/1: AT91RM9200 New boards
Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor
Russell King
parent
d6bdbb8ef3
commit
6902f523a3
|
|
@ -49,6 +49,18 @@
|
|||
cmp r7, r3
|
||||
beq 99f
|
||||
|
||||
@ Embest ATEB9200 : 923
|
||||
mov r3, #(MACH_TYPE_ATEB9200 & 0xff)
|
||||
orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00)
|
||||
cmp r7, r3
|
||||
beq 99f
|
||||
|
||||
@ Sperry-Sun KAFA : 662
|
||||
mov r3, #(MACH_TYPE_KAFA & 0xff)
|
||||
orr r3, r3, #(MACH_TYPE_KAFA & 0xff00)
|
||||
cmp r7, r3
|
||||
beq 99f
|
||||
|
||||
@ Unknown board, use the AT91RM9200DK board
|
||||
@ mov r7, #MACH_TYPE_AT91RM9200
|
||||
mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
|
||||
|
|
|
|||
1312
arch/arm/configs/ateb9200_defconfig
Normal file
1312
arch/arm/configs/ateb9200_defconfig
Normal file
File diff suppressed because it is too large
Load diff
723
arch/arm/configs/carmeva_defconfig
Normal file
723
arch/arm/configs/carmeva_defconfig
Normal file
|
|
@ -0,0 +1,723 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.12-rc4
|
||||
# Tue Jun 14 12:05:24 2005
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_GENERIC_IOMAP=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_SWAP=y
|
||||
# CONFIG_SYSVIPC is not set
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_SYSCTL is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
# CONFIG_KMOD is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
CONFIG_ARCH_AT91RM9200=y
|
||||
|
||||
#
|
||||
# AT91RM9200 Implementations
|
||||
#
|
||||
# CONFIG_ARCH_AT91RM9200DK is not set
|
||||
# CONFIG_MACH_AT91RM9200EK is not set
|
||||
# CONFIG_MACH_CSB337 is not set
|
||||
# CONFIG_MACH_CSB637 is not set
|
||||
CONFIG_MACH_CARMEVA=y
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_ARM920T=y
|
||||
CONFIG_CPU_32v4=y
|
||||
CONFIG_CPU_ABRT_EV4T=y
|
||||
CONFIG_CPU_CACHE_V4WT=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_SMP is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_DISCONTIGMEM is not set
|
||||
# CONFIG_LEDS is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE=""
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
# CONFIG_FPE_NWFPE_XP is not set
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
# CONFIG_MTD_CFI is not set
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLKMTD is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
CONFIG_MTD_AT91_DATAFLASH=y
|
||||
# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
|
||||
|
||||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_PACKET is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PNP=y
|
||||
# CONFIG_IP_PNP_DHCP is not set
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_IP_MROUTE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
CONFIG_ARM_AT91_ETHER_RMII=y
|
||||
# CONFIG_SMC91X is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
CONFIG_SERIO=m
|
||||
CONFIG_SERIO_SERPORT=m
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_AT91=y
|
||||
CONFIG_SERIAL_AT91_CONSOLE=y
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_AT91_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
CONFIG_AT91_SPI=y
|
||||
CONFIG_AT91_SPIDEV=y
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
CONFIG_MMC=m
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_MMC_BLOCK=m
|
||||
CONFIG_MMC_AT91RM9200=m
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_JBD is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_SYSFS=y
|
||||
# CONFIG_DEVFS_FS is not set
|
||||
CONFIG_DEVPTS_FS_XATTR=y
|
||||
CONFIG_DEVPTS_FS_SECURITY=y
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
CONFIG_JFFS_FS=y
|
||||
CONFIG_JFFS_FS_VERBOSE=0
|
||||
CONFIG_JFFS_PROC_FS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_NAND=y
|
||||
# CONFIG_JFFS2_FS_NOR_ECC is not set
|
||||
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_JFFS2_CMODE_NONE is not set
|
||||
CONFIG_JFFS2_CMODE_PRIORITY=y
|
||||
# CONFIG_JFFS2_CMODE_SIZE is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
CONFIG_NFSD=y
|
||||
# CONFIG_NFSD_V3 is not set
|
||||
CONFIG_NFSD_TCP=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_EXPORTFS=y
|
||||
CONFIG_SUNRPC=y
|
||||
CONFIG_SUNRPC_GSS=y
|
||||
CONFIG_RPCSEC_GSS_KRB5=y
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
CONFIG_CRYPTO=y
|
||||
# CONFIG_CRYPTO_HMAC is not set
|
||||
# CONFIG_CRYPTO_NULL is not set
|
||||
# CONFIG_CRYPTO_MD4 is not set
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
# CONFIG_CRYPTO_SHA1 is not set
|
||||
# CONFIG_CRYPTO_SHA256 is not set
|
||||
# CONFIG_CRYPTO_SHA512 is not set
|
||||
# CONFIG_CRYPTO_WP512 is not set
|
||||
# CONFIG_CRYPTO_TGR192 is not set
|
||||
CONFIG_CRYPTO_DES=y
|
||||
# CONFIG_CRYPTO_BLOWFISH is not set
|
||||
# CONFIG_CRYPTO_TWOFISH is not set
|
||||
# CONFIG_CRYPTO_SERPENT is not set
|
||||
# CONFIG_CRYPTO_AES is not set
|
||||
# CONFIG_CRYPTO_CAST5 is not set
|
||||
# CONFIG_CRYPTO_CAST6 is not set
|
||||
# CONFIG_CRYPTO_TEA is not set
|
||||
# CONFIG_CRYPTO_ARC4 is not set
|
||||
# CONFIG_CRYPTO_KHAZAD is not set
|
||||
# CONFIG_CRYPTO_ANUBIS is not set
|
||||
# CONFIG_CRYPTO_DEFLATE is not set
|
||||
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
||||
# CONFIG_CRYPTO_CRC32C is not set
|
||||
# CONFIG_CRYPTO_TEST is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
884
arch/arm/configs/kafa_defconfig
Normal file
884
arch/arm/configs/kafa_defconfig
Normal file
|
|
@ -0,0 +1,884 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.17-rc3
|
||||
# Sun May 7 16:54:53 2006
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_LOCK_KERNEL=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
# CONFIG_RELAY is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_UID16=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
# CONFIG_EMBEDDED is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
# CONFIG_KMOD is not set
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_DEFAULT_AS is not set
|
||||
CONFIG_DEFAULT_DEADLINE=y
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_EP93XX is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_IXP23XX is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
CONFIG_ARCH_AT91RM9200=y
|
||||
|
||||
#
|
||||
# AT91RM9200 Implementations
|
||||
#
|
||||
|
||||
#
|
||||
# AT91RM9200 Board Type
|
||||
#
|
||||
# CONFIG_ARCH_AT91RM9200DK is not set
|
||||
# CONFIG_MACH_AT91RM9200EK is not set
|
||||
# CONFIG_MACH_CSB337 is not set
|
||||
# CONFIG_MACH_CSB637 is not set
|
||||
# CONFIG_MACH_CARMEVA is not set
|
||||
# CONFIG_MACH_KB9200 is not set
|
||||
# CONFIG_MACH_ATEB9200 is not set
|
||||
CONFIG_MACH_KAFA=y
|
||||
|
||||
#
|
||||
# AT91 Feature Selections
|
||||
#
|
||||
# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_ARM920T=y
|
||||
CONFIG_CPU_32v4=y
|
||||
CONFIG_CPU_ABRT_EV4T=y
|
||||
CONFIG_CPU_CACHE_V4WT=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
CONFIG_HZ=100
|
||||
# CONFIG_AEABI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
CONFIG_LEDS=y
|
||||
# CONFIG_LEDS_TIMER is not set
|
||||
CONFIG_LEDS_CPU=y
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
# CONFIG_FPE_NWFPE_XP is not set
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
CONFIG_BINFMT_MISC=y
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_APM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
# CONFIG_IP_PNP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET6_TUNNEL is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
# CONFIG_MTD_BLOCK is not set
|
||||
CONFIG_MTD_BLOCK_RO=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
# CONFIG_MTD_CFI is not set
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
CONFIG_MTD_AT91_DATAFLASH=y
|
||||
# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
|
||||
|
||||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
|
||||
#
|
||||
# OneNAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
CONFIG_PHYLIB=y
|
||||
|
||||
#
|
||||
# MII PHY device drivers
|
||||
#
|
||||
# CONFIG_MARVELL_PHY is not set
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
# CONFIG_QSEMI_PHY is not set
|
||||
# CONFIG_LXT_PHY is not set
|
||||
# CONFIG_CICADA_PHY is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_AT91=y
|
||||
CONFIG_SERIAL_AT91_CONSOLE=y
|
||||
# CONFIG_SERIAL_AT91_TTYAT is not set
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=32
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_AT91_WATCHDOG=y
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_TELCLOCK is not set
|
||||
CONFIG_AT91_SPI=y
|
||||
CONFIG_AT91_SPIDEV=y
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
|
||||
#
|
||||
# I2C Algorithms
|
||||
#
|
||||
# CONFIG_I2C_ALGOBIT is not set
|
||||
# CONFIG_I2C_ALGOPCF is not set
|
||||
# CONFIG_I2C_ALGOPCA is not set
|
||||
|
||||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
CONFIG_I2C_AT91=y
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
# CONFIG_I2C_PCA_ISA is not set
|
||||
|
||||
#
|
||||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_HWMON_VID is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# LED devices
|
||||
#
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
|
||||
#
|
||||
# LED drivers
|
||||
#
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# Real Time Clock
|
||||
#
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_HCTOSYS is not set
|
||||
|
||||
#
|
||||
# RTC interfaces
|
||||
#
|
||||
CONFIG_RTC_INTF_SYSFS=y
|
||||
CONFIG_RTC_INTF_PROC=y
|
||||
CONFIG_RTC_INTF_DEV=y
|
||||
|
||||
#
|
||||
# RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_X1205 is not set
|
||||
# CONFIG_RTC_DRV_DS1672 is not set
|
||||
# CONFIG_RTC_DRV_PCF8563 is not set
|
||||
# CONFIG_RTC_DRV_RS5C372 is not set
|
||||
# CONFIG_RTC_DRV_M48T86 is not set
|
||||
CONFIG_RTC_DRV_AT91=y
|
||||
# CONFIG_RTC_DRV_TEST is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
# CONFIG_EXT2_FS is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_INOTIFY is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS_FS is not set
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
CONFIG_CRAMFS=y
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_LOCKD=m
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=m
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_UNWIND_INFO is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
CONFIG_CRYPTO=y
|
||||
# CONFIG_CRYPTO_HMAC is not set
|
||||
# CONFIG_CRYPTO_NULL is not set
|
||||
# CONFIG_CRYPTO_MD4 is not set
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
# CONFIG_CRYPTO_SHA1 is not set
|
||||
# CONFIG_CRYPTO_SHA256 is not set
|
||||
# CONFIG_CRYPTO_SHA512 is not set
|
||||
# CONFIG_CRYPTO_WP512 is not set
|
||||
# CONFIG_CRYPTO_TGR192 is not set
|
||||
CONFIG_CRYPTO_DES=y
|
||||
# CONFIG_CRYPTO_BLOWFISH is not set
|
||||
# CONFIG_CRYPTO_TWOFISH is not set
|
||||
# CONFIG_CRYPTO_SERPENT is not set
|
||||
# CONFIG_CRYPTO_AES is not set
|
||||
# CONFIG_CRYPTO_CAST5 is not set
|
||||
# CONFIG_CRYPTO_CAST6 is not set
|
||||
# CONFIG_CRYPTO_TEA is not set
|
||||
# CONFIG_CRYPTO_ARC4 is not set
|
||||
# CONFIG_CRYPTO_KHAZAD is not set
|
||||
# CONFIG_CRYPTO_ANUBIS is not set
|
||||
# CONFIG_CRYPTO_DEFLATE is not set
|
||||
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
||||
# CONFIG_CRYPTO_CRC32C is not set
|
||||
# CONFIG_CRYPTO_TEST is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
780
arch/arm/configs/kb9202_defconfig
Normal file
780
arch/arm/configs/kb9202_defconfig
Normal file
|
|
@ -0,0 +1,780 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.13-rc2
|
||||
# Sun Aug 14 19:26:59 2005
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_SWAP is not set
|
||||
# CONFIG_SYSVIPC is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
# CONFIG_KOBJECT_UEVENT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
# CONFIG_EMBEDDED is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
CONFIG_ARCH_AT91RM9200=y
|
||||
|
||||
#
|
||||
# AT91RM9200 Implementations
|
||||
#
|
||||
# CONFIG_ARCH_AT91RM9200DK is not set
|
||||
# CONFIG_MACH_AT91RM9200EK is not set
|
||||
# CONFIG_MACH_CSB337 is not set
|
||||
# CONFIG_MACH_CSB637 is not set
|
||||
# CONFIG_MACH_CARMEVA is not set
|
||||
CONFIG_MACH_KB9200=y
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_ARM920T=y
|
||||
CONFIG_CPU_32v4=y
|
||||
CONFIG_CPU_ABRT_EV4T=y
|
||||
CONFIG_CPU_CACHE_V4WT=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_LEDS is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x10000000
|
||||
CONFIG_ZBOOT_ROM_BSS=0x20040000
|
||||
CONFIG_ZBOOT_ROM=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
# CONFIG_FPE_NWFPE_XP is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
CONFIG_BINFMT_AOUT=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
CONFIG_DEBUG_DRIVER=y
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_PROC_FS=y
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
# CONFIG_BLK_DEV_SR is not set
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
# CONFIG_CHR_DEV_SCH is not set
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
#
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
# CONFIG_SCSI_CONSTANTS is not set
|
||||
# CONFIG_SCSI_LOGGING is not set
|
||||
|
||||
#
|
||||
# SCSI Transport Attributes
|
||||
#
|
||||
# CONFIG_SCSI_SPI_ATTRS is not set
|
||||
# CONFIG_SCSI_FC_ATTRS is not set
|
||||
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
||||
|
||||
#
|
||||
# SCSI low-level drivers
|
||||
#
|
||||
# CONFIG_SCSI_SATA is not set
|
||||
# CONFIG_SCSI_DEBUG is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_IP_MROUTE is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
# CONFIG_IP_TCPDIAG is not set
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ARM_AT91_ETHER=y
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_AT91=y
|
||||
CONFIG_SERIAL_AT91_CONSOLE=y
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_AT91_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_AT91_SPI is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_BLUETOOTH_TTY is not set
|
||||
# CONFIG_USB_ACM is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_STORAGE_DEBUG=y
|
||||
# CONFIG_USB_STORAGE_FREECOM is not set
|
||||
# CONFIG_USB_STORAGE_DPCM is not set
|
||||
|
||||
#
|
||||
# USB Input Devices
|
||||
#
|
||||
# CONFIG_USB_HID is not set
|
||||
|
||||
#
|
||||
# USB HID Boot Protocol drivers
|
||||
#
|
||||
# CONFIG_USB_KBD is not set
|
||||
# CONFIG_USB_MOUSE is not set
|
||||
# CONFIG_USB_AIPTEK is not set
|
||||
# CONFIG_USB_WACOM is not set
|
||||
# CONFIG_USB_ACECAD is not set
|
||||
# CONFIG_USB_KBTAB is not set
|
||||
# CONFIG_USB_POWERMATE is not set
|
||||
# CONFIG_USB_MTOUCH is not set
|
||||
# CONFIG_USB_ITMTOUCH is not set
|
||||
# CONFIG_USB_EGALAX is not set
|
||||
# CONFIG_USB_XPAD is not set
|
||||
# CONFIG_USB_ATI_REMOTE is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MICROTEK is not set
|
||||
|
||||
#
|
||||
# USB Multimedia devices
|
||||
#
|
||||
# CONFIG_USB_DABUSB is not set
|
||||
|
||||
#
|
||||
# Video4Linux support is needed for USB Multimedia device support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Network Adapters
|
||||
#
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
# CONFIG_USB_USBNET is not set
|
||||
# CONFIG_USB_MON is not set
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Serial Converter support
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGETKIT is not set
|
||||
# CONFIG_USB_PHIDGETSERVO is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
|
||||
#
|
||||
# USB DSL modem support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_AUTOFS_FS=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
CONFIG_FAT_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_DEVPTS_FS_XATTR=y
|
||||
# CONFIG_DEVPTS_FS_SECURITY is not set
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_XATTR is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="utf8"
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
CONFIG_NLS_ASCII=y
|
||||
# CONFIG_NLS_ISO8859_1 is not set
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
|
|
@ -40,6 +40,18 @@ config MACH_KB9200
|
|||
help
|
||||
Select this if you are using KwikByte's KB920x board
|
||||
|
||||
config MACH_ATEB9200
|
||||
bool "Embest's ATEB9200"
|
||||
depends on ARCH_AT91RM9200
|
||||
help
|
||||
Select this if you are using Embest's ATEB9200 board
|
||||
|
||||
config MACH_KAFA
|
||||
bool "Sperry-Sun KAFA board"
|
||||
depends on ARCH_AT91RM9200
|
||||
help
|
||||
Select this if you are using Sperry-Sun's KAFA board
|
||||
|
||||
|
||||
comment "AT91RM9200 Feature Selections"
|
||||
|
||||
|
|
|
|||
|
|
@ -12,16 +12,18 @@ obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
|
|||
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
|
||||
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
|
||||
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
|
||||
#obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
|
||||
#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
|
||||
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
|
||||
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
|
||||
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
|
||||
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
|
||||
|
||||
# LEDs support
|
||||
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
|
||||
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
|
||||
led-$(CONFIG_MACH_CSB337) += leds.o
|
||||
led-$(CONFIG_MACH_CSB637) += leds.o
|
||||
#led-$(CONFIG_MACH_KB9200) += leds.o
|
||||
#led-$(CONFIG_MACH_KAFA) += leds.o
|
||||
led-$(CONFIG_MACH_KB9200) += leds.o
|
||||
led-$(CONFIG_MACH_KAFA) += leds.o
|
||||
obj-$(CONFIG_LEDS) += $(led-y)
|
||||
|
||||
# VGA support
|
||||
|
|
|
|||
131
arch/arm/mach-at91rm9200/board-carmeva.c
Normal file
131
arch/arm/mach-at91rm9200/board-carmeva.c
Normal file
|
|
@ -0,0 +1,131 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91rm9200/board-carmeva.c
|
||||
*
|
||||
* Copyright (c) 2005 Peer Georgi
|
||||
* Conitec Datasystems
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
static void __init carmeva_init_irq(void)
|
||||
{
|
||||
/* Initialize AIC controller */
|
||||
at91rm9200_init_irq(NULL);
|
||||
|
||||
/* Set up the GPIO interrupts */
|
||||
at91_gpio_irq_setup(BGA_GPIO_BANKS);
|
||||
}
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata carmeva_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init carmeva_map_io(void)
|
||||
{
|
||||
at91rm9200_map_io();
|
||||
|
||||
/* Initialize clocks: 20.000 MHz crystal */
|
||||
at91_clock_init(20000000);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&carmeva_uart_config);
|
||||
}
|
||||
|
||||
static struct at91_eth_data __initdata carmeva_eth_data = {
|
||||
.phy_irq_pin = AT91_PIN_PC4,
|
||||
.is_rmii = 1,
|
||||
};
|
||||
|
||||
static struct at91_usbh_data __initdata carmeva_usbh_data = {
|
||||
.ports = 2,
|
||||
};
|
||||
|
||||
static struct at91_udc_data __initdata carmeva_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PD12,
|
||||
.pullup_pin = AT91_PIN_PD9,
|
||||
};
|
||||
|
||||
/* FIXME: user dependend */
|
||||
// static struct at91_cf_data __initdata carmeva_cf_data = {
|
||||
// .det_pin = AT91_PIN_PB0,
|
||||
// .rst_pin = AT91_PIN_PC5,
|
||||
// .irq_pin = ... not connected
|
||||
// .vcc_pin = ... always powered
|
||||
// };
|
||||
|
||||
static struct at91_mmc_data __initdata carmeva_mmc_data = {
|
||||
.is_b = 0,
|
||||
.wire4 = 1,
|
||||
};
|
||||
|
||||
static void __init carmeva_board_init(void)
|
||||
{
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* Ethernet */
|
||||
at91_add_device_eth(&carmeva_eth_data);
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&carmeva_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&carmeva_udc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c();
|
||||
/* Compact Flash */
|
||||
// at91_add_device_cf(&carmeva_cf_data);
|
||||
/* SPI */
|
||||
// at91_add_device_spi(NULL, 0);
|
||||
/* MMC */
|
||||
at91_add_device_mmc(&carmeva_mmc_data);
|
||||
}
|
||||
|
||||
MACHINE_START(CARMEVA, "Carmeva")
|
||||
/* Maintainer: Conitec Datasystems */
|
||||
.phys_io = AT91_BASE_SYS,
|
||||
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
||||
.boot_params = AT91_SDRAM_BASE + 0x100,
|
||||
.timer = &at91rm9200_timer,
|
||||
.map_io = carmeva_map_io,
|
||||
.init_irq = carmeva_init_irq,
|
||||
.init_machine = carmeva_board_init,
|
||||
MACHINE_END
|
||||
130
arch/arm/mach-at91rm9200/board-eb9200.c
Normal file
130
arch/arm/mach-at91rm9200/board-eb9200.c
Normal file
|
|
@ -0,0 +1,130 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91rm9200/board-eb9200.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
|
||||
* by Andrew Patrikalakis
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
static void __init eb9200_init_irq(void)
|
||||
{
|
||||
/* Initialize AIC controller */
|
||||
at91rm9200_init_irq(NULL);
|
||||
|
||||
/* Set up the GPIO interrupts */
|
||||
at91_gpio_irq_setup(BGA_GPIO_BANKS);
|
||||
}
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata eb9200_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init eb9200_map_io(void)
|
||||
{
|
||||
at91rm9200_map_io();
|
||||
|
||||
/* Initialize clocks: 18.432 MHz crystal */
|
||||
at91_clock_init(18432000);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&eb9200_uart_config);
|
||||
}
|
||||
|
||||
static struct at91_eth_data __initdata eb9200_eth_data = {
|
||||
.phy_irq_pin = AT91_PIN_PC4,
|
||||
.is_rmii = 1,
|
||||
};
|
||||
|
||||
static struct at91_usbh_data __initdata eb9200_usbh_data = {
|
||||
.ports = 2,
|
||||
};
|
||||
|
||||
static struct at91_udc_data __initdata eb9200_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PD4,
|
||||
.pullup_pin = AT91_PIN_PD5,
|
||||
};
|
||||
|
||||
static struct at91_cf_data __initdata eb9200_cf_data = {
|
||||
.det_pin = AT91_PIN_PB0,
|
||||
.rst_pin = AT91_PIN_PC5,
|
||||
// .irq_pin = ... not connected
|
||||
// .vcc_pin = ... always powered
|
||||
};
|
||||
|
||||
static struct at91_mmc_data __initdata eb9200_mmc_data = {
|
||||
.is_b = 0,
|
||||
.wire4 = 1,
|
||||
};
|
||||
|
||||
static void __init eb9200_board_init(void)
|
||||
{
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* Ethernet */
|
||||
at91_add_device_eth(&eb9200_eth_data);
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&eb9200_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&eb9200_udc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c();
|
||||
/* Compact Flash */
|
||||
at91_add_device_cf(&eb9200_cf_data);
|
||||
/* SPI */
|
||||
at91_add_device_spi(NULL, 0);
|
||||
/* MMC */
|
||||
/* only supports 1 or 4 bit interface, not wired through to SPI */
|
||||
at91_add_device_mmc(&eb9200_mmc_data);
|
||||
}
|
||||
|
||||
MACHINE_START(ATEB9200, "Embest ATEB9200")
|
||||
.phys_io = AT91_BASE_SYS,
|
||||
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
||||
.boot_params = AT91_SDRAM_BASE + 0x100,
|
||||
.timer = &at91rm9200_timer,
|
||||
.map_io = eb9200_map_io,
|
||||
.init_irq = eb9200_init_irq,
|
||||
.init_machine = eb9200_board_init,
|
||||
MACHINE_END
|
||||
116
arch/arm/mach-at91rm9200/board-kafa.c
Normal file
116
arch/arm/mach-at91rm9200/board-kafa.c
Normal file
|
|
@ -0,0 +1,116 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91rm9200/board-kafa.c
|
||||
*
|
||||
* Copyright (C) 2006 Sperry-Sun
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
static void __init kafa_init_irq(void)
|
||||
{
|
||||
/* Initialize AIC controller */
|
||||
at91rm9200_init_irq(NULL);
|
||||
|
||||
/* Set up the GPIO interrupts */
|
||||
at91_gpio_irq_setup(PQFP_GPIO_BANKS);
|
||||
}
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata kafa_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 2,
|
||||
.tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init kafa_map_io(void)
|
||||
{
|
||||
at91rm9200_map_io();
|
||||
|
||||
/* Initialize clocks: 18.432 MHz crystal */
|
||||
at91_clock_init(18432000);
|
||||
|
||||
/* Set up the LEDs */
|
||||
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&kafa_uart_config);
|
||||
}
|
||||
|
||||
static struct at91_eth_data __initdata kafa_eth_data = {
|
||||
.phy_irq_pin = AT91_PIN_PC4,
|
||||
.is_rmii = 0,
|
||||
};
|
||||
|
||||
static struct at91_usbh_data __initdata kafa_usbh_data = {
|
||||
.ports = 1,
|
||||
};
|
||||
|
||||
static struct at91_udc_data __initdata kafa_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PB6,
|
||||
.pullup_pin = AT91_PIN_PB7,
|
||||
};
|
||||
|
||||
static void __init kafa_board_init(void)
|
||||
{
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* Ethernet */
|
||||
at91_add_device_eth(&kafa_eth_data);
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&kafa_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&kafa_udc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c();
|
||||
/* SPI */
|
||||
at91_add_device_spi(NULL, 0);
|
||||
}
|
||||
|
||||
MACHINE_START(KAFA, "Sperry-Sun KAFA")
|
||||
/* Maintainer: Sergei Sharonov */
|
||||
.phys_io = AT91_BASE_SYS,
|
||||
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
||||
.boot_params = AT91_SDRAM_BASE + 0x100,
|
||||
.timer = &at91rm9200_timer,
|
||||
.map_io = kafa_map_io,
|
||||
.init_irq = kafa_init_irq,
|
||||
.init_machine = kafa_board_init,
|
||||
MACHINE_END
|
||||
125
arch/arm/mach-at91rm9200/board-kb9202.c
Normal file
125
arch/arm/mach-at91rm9200/board-kb9202.c
Normal file
|
|
@ -0,0 +1,125 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91rm9200/board-kb9202.c
|
||||
*
|
||||
* Copyright (c) 2005 kb_admin
|
||||
* KwikByte, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/board.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
static void __init kb9202_init_irq(void)
|
||||
{
|
||||
/* Initialize AIC controller */
|
||||
at91rm9200_init_irq(NULL);
|
||||
|
||||
/* Set up the GPIO interrupts */
|
||||
at91_gpio_irq_setup(PQFP_GPIO_BANKS);
|
||||
}
|
||||
|
||||
/*
|
||||
* Serial port configuration.
|
||||
* 0 .. 3 = USART0 .. USART3
|
||||
* 4 = DBGU
|
||||
*/
|
||||
static struct at91_uart_config __initdata kb9202_uart_config = {
|
||||
.console_tty = 0, /* ttyS0 */
|
||||
.nr_tty = 3,
|
||||
.tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
||||
};
|
||||
|
||||
static void __init kb9202_map_io(void)
|
||||
{
|
||||
at91rm9200_map_io();
|
||||
|
||||
/* Initialize clocks: 10 MHz crystal */
|
||||
at91_clock_init(10000000);
|
||||
|
||||
/* Set up the LEDs */
|
||||
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
|
||||
|
||||
/* Setup the serial ports and console */
|
||||
at91_init_serial(&kb9202_uart_config);
|
||||
}
|
||||
|
||||
static struct at91_eth_data __initdata kb9202_eth_data = {
|
||||
.phy_irq_pin = AT91_PIN_PB29,
|
||||
.is_rmii = 0,
|
||||
};
|
||||
|
||||
static struct at91_usbh_data __initdata kb9202_usbh_data = {
|
||||
.ports = 1,
|
||||
};
|
||||
|
||||
static struct at91_udc_data __initdata kb9202_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PB24,
|
||||
.pullup_pin = AT91_PIN_PB22,
|
||||
};
|
||||
|
||||
static struct at91_mmc_data __initdata kb9202_mmc_data = {
|
||||
.det_pin = AT91_PIN_PB2,
|
||||
.is_b = 0,
|
||||
.wire4 = 1,
|
||||
};
|
||||
|
||||
static void __init kb9202_board_init(void)
|
||||
{
|
||||
/* Serial */
|
||||
at91_add_device_serial();
|
||||
/* Ethernet */
|
||||
at91_add_device_eth(&kb9202_eth_data);
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&kb9202_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&kb9202_udc_data);
|
||||
/* MMC */
|
||||
at91_add_device_mmc(&kb9202_mmc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c();
|
||||
/* SPI */
|
||||
at91_add_device_spi(NULL, 0);
|
||||
}
|
||||
|
||||
MACHINE_START(KB9200, "KB920x")
|
||||
/* Maintainer: KwikByte, Inc. */
|
||||
.phys_io = AT91_BASE_SYS,
|
||||
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
||||
.boot_params = AT91_SDRAM_BASE + 0x100,
|
||||
.timer = &at91rm9200_timer,
|
||||
.map_io = kb9202_map_io,
|
||||
.init_irq = kb9202_init_irq,
|
||||
.init_machine = kb9202_board_init,
|
||||
MACHINE_END
|
||||
Loading…
Reference in a new issue