myri10ge: update firmware headers

Update myri10ge firmware headers.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Brice Goglin 2008-08-06 16:14:43 +02:00 committed by Jeff Garzik
parent 0967d61ea0
commit 6a4c4ad2f0
2 changed files with 48 additions and 6 deletions

View file

@ -101,6 +101,8 @@ struct mcp_kreq_ether_recv {
#define MXGEFW_ETH_SEND_3 0x2c0000
#define MXGEFW_ETH_RECV_SMALL 0x300000
#define MXGEFW_ETH_RECV_BIG 0x340000
#define MXGEFW_ETH_SEND_GO 0x380000
#define MXGEFW_ETH_SEND_STOP 0x3C0000
#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000))
#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
@ -120,6 +122,11 @@ enum myri10ge_mcp_cmd_type {
* MXGEFW_CMD_RESET is issued */
MXGEFW_CMD_SET_INTRQ_DMA,
/* data0 = LSW of the host address
* data1 = MSW of the host address
* data2 = slice number if multiple slices are used
*/
MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */
MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */
@ -129,6 +136,8 @@ enum myri10ge_mcp_cmd_type {
MXGEFW_CMD_GET_SEND_OFFSET,
MXGEFW_CMD_GET_SMALL_RX_OFFSET,
MXGEFW_CMD_GET_BIG_RX_OFFSET,
/* data0 = slice number if multiple slices are used */
MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
@ -200,7 +209,12 @@ enum myri10ge_mcp_cmd_type {
MXGEFW_CMD_SET_STATS_DMA_V2,
/* data0, data1 = bus addr,
* data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
* adding new stuff to mcp_irq_data without changing the ABI */
* adding new stuff to mcp_irq_data without changing the ABI
*
* If multiple slices are used, data2 contains both the size of the
* structure (in the lower 16 bits) and the slice number
* (in the upper 16 bits).
*/
MXGEFW_CMD_UNALIGNED_TEST,
/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
@ -222,13 +236,18 @@ enum myri10ge_mcp_cmd_type {
MXGEFW_CMD_GET_MAX_RSS_QUEUES,
MXGEFW_CMD_ENABLE_RSS_QUEUES,
/* data0 = number of slices n (0, 1, ..., n-1) to enable
* data1 = interrupt mode.
* 0=share one INTx/MSI, 1=use one MSI-X per queue.
* data1 = interrupt mode | use of multiple transmit queues.
* 0=share one INTx/MSI.
* 1=use one MSI-X per queue.
* If all queues share one interrupt, the driver must have set
* RSS_SHARED_INTERRUPT_DMA before enabling queues.
* 2=enable both receive and send queues.
* Without this bit set, only one send queue (slice 0's send queue)
* is enabled. The receive queues are always enabled.
*/
#define MXGEFW_SLICE_INTR_MODE_SHARED 0
#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0
#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1
#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
@ -250,10 +269,13 @@ enum myri10ge_mcp_cmd_type {
* 2: TCP_IPV4 (required by RSS)
* 3: IPV4 | TCP_IPV4 (required by RSS)
* 4: source port
* 5: source port + destination port
*/
#define MXGEFW_RSS_HASH_TYPE_IPV4 0x1
#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2
#define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4
#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
@ -329,6 +351,20 @@ enum myri10ge_mcp_cmd_type {
MXGEFW_CMD_GET_DCA_OFFSET,
/* offset of dca control for WDMAs */
/* VMWare NetQueue commands */
MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
MXGEFW_CMD_NETQ_ADD_FILTER,
/* data0 = filter_id << 16 | queue << 8 | type */
/* data1 = MS4 of MAC Addr */
/* data2 = LS2_MAC << 16 | VLAN_tag */
MXGEFW_CMD_NETQ_DEL_FILTER,
/* data0 = filter_id */
MXGEFW_CMD_NETQ_QUERY1,
MXGEFW_CMD_NETQ_QUERY2,
MXGEFW_CMD_NETQ_QUERY3,
MXGEFW_CMD_NETQ_QUERY4,
};
enum myri10ge_mcp_cmd_status {
@ -381,4 +417,10 @@ struct mcp_irq_data {
u8 valid;
};
/* definitions for NETQ filter type */
#define MXGEFW_NETQ_FILTERTYPE_NONE 0
#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3
#endif /* __MYRI10GE_MCP_H__ */

View file

@ -35,7 +35,7 @@ struct mcp_gen_header {
unsigned char mcp_index;
unsigned char disable_rabbit;
unsigned char unaligned_tlp;
unsigned char pad1;
unsigned char pcie_link_algo;
unsigned counters_addr;
unsigned copy_block_info; /* for small mcps loaded with "lload -d" */
unsigned short handoff_id_major; /* must be equal */