clk: sunxi: Add A31 clocks support
The A31 has a mostly different clock set compared to the other older SoCs currently supported in the Allwinner clock driver. Add support for the basic useful clocks. The other ones will come in eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Emilio López <emilio@elopez.com.ar>
This commit is contained in:
parent
70855bb5c6
commit
6a721db180
|
@ -8,6 +8,7 @@ Required properties:
|
|||
- compatible : shall be one of the following:
|
||||
"allwinner,sun4i-osc-clk" - for a gatable oscillator
|
||||
"allwinner,sun4i-pll1-clk" - for the main PLL clock
|
||||
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
|
||||
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
|
||||
"allwinner,sun4i-axi-clk" - for the AXI clock
|
||||
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
|
||||
|
@ -15,6 +16,8 @@ Required properties:
|
|||
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
|
||||
"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
|
||||
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
|
||||
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
|
||||
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
|
||||
"allwinner,sun4i-apb0-clk" - for the APB0 clock
|
||||
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
|
||||
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
|
||||
|
@ -24,6 +27,9 @@ Required properties:
|
|||
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
|
||||
"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
|
||||
"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
|
||||
"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
|
||||
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
|
||||
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
|
||||
|
||||
Required properties for all clocks:
|
||||
- reg : shall be the control register address for the clock.
|
||||
|
|
|
@ -0,0 +1,83 @@
|
|||
Gate clock outputs
|
||||
------------------
|
||||
|
||||
* AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
|
||||
|
||||
MIPI DSI 1
|
||||
|
||||
SS 5
|
||||
DMA 6
|
||||
|
||||
MMC0 8
|
||||
MMC1 9
|
||||
MMC2 10
|
||||
MMC3 11
|
||||
|
||||
NAND1 12
|
||||
NAND0 13
|
||||
SDRAM 14
|
||||
|
||||
GMAC 17
|
||||
TS 18
|
||||
HSTIMER 19
|
||||
SPI0 20
|
||||
SPI1 21
|
||||
SPI2 22
|
||||
SPI3 23
|
||||
USB_OTG 24
|
||||
|
||||
EHCI0 26
|
||||
EHCI1 27
|
||||
|
||||
OHCI0 29
|
||||
OHCI1 30
|
||||
OHCI2 31
|
||||
VE 32
|
||||
|
||||
LCD0 36
|
||||
LCD1 37
|
||||
|
||||
CSI 40
|
||||
|
||||
HDMI 43
|
||||
DE_BE0 44
|
||||
DE_BE1 45
|
||||
DE_FE1 46
|
||||
DE_FE1 47
|
||||
|
||||
MP 50
|
||||
|
||||
GPU 52
|
||||
|
||||
DEU0 55
|
||||
DEU1 56
|
||||
DRC0 57
|
||||
DRC1 58
|
||||
|
||||
* APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
|
||||
|
||||
CODEC 0
|
||||
|
||||
DIGITAL MIC 4
|
||||
PIO 5
|
||||
|
||||
DAUDIO0 12
|
||||
DAUDIO1 13
|
||||
|
||||
* APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
|
||||
|
||||
I2C0 0
|
||||
I2C1 1
|
||||
I2C2 2
|
||||
I2C3 3
|
||||
|
||||
UART0 16
|
||||
UART1 17
|
||||
UART2 18
|
||||
UART3 19
|
||||
UART4 20
|
||||
UART5 21
|
||||
|
||||
Notation:
|
||||
[*]: The datasheet didn't mention these, but they are present on AW code
|
||||
[**]: The datasheet had this marked as "NC" but they are used on AW code
|
|
@ -125,7 +125,89 @@ static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate,
|
|||
*n = div / 4;
|
||||
}
|
||||
|
||||
/**
|
||||
* sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1
|
||||
* PLL1 rate is calculated as follows
|
||||
* rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
|
||||
* parent_rate should always be 24MHz
|
||||
*/
|
||||
static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
|
||||
u8 *n, u8 *k, u8 *m, u8 *p)
|
||||
{
|
||||
/*
|
||||
* We can operate only on MHz, this will make our life easier
|
||||
* later.
|
||||
*/
|
||||
u32 freq_mhz = *freq / 1000000;
|
||||
u32 parent_freq_mhz = parent_rate / 1000000;
|
||||
|
||||
/*
|
||||
* Round down the frequency to the closest multiple of either
|
||||
* 6 or 16
|
||||
*/
|
||||
u32 round_freq_6 = round_down(freq_mhz, 6);
|
||||
u32 round_freq_16 = round_down(freq_mhz, 16);
|
||||
|
||||
if (round_freq_6 > round_freq_16)
|
||||
freq_mhz = round_freq_6;
|
||||
else
|
||||
freq_mhz = round_freq_16;
|
||||
|
||||
*freq = freq_mhz * 1000000;
|
||||
|
||||
/*
|
||||
* If the factors pointer are null, we were just called to
|
||||
* round down the frequency.
|
||||
* Exit.
|
||||
*/
|
||||
if (n == NULL)
|
||||
return;
|
||||
|
||||
/* If the frequency is a multiple of 32 MHz, k is always 3 */
|
||||
if (!(freq_mhz % 32))
|
||||
*k = 3;
|
||||
/* If the frequency is a multiple of 9 MHz, k is always 2 */
|
||||
else if (!(freq_mhz % 9))
|
||||
*k = 2;
|
||||
/* If the frequency is a multiple of 8 MHz, k is always 1 */
|
||||
else if (!(freq_mhz % 8))
|
||||
*k = 1;
|
||||
/* Otherwise, we don't use the k factor */
|
||||
else
|
||||
*k = 0;
|
||||
|
||||
/*
|
||||
* If the frequency is a multiple of 2 but not a multiple of
|
||||
* 3, m is 3. This is the first time we use 6 here, yet we
|
||||
* will use it on several other places.
|
||||
* We use this number because it's the lowest frequency we can
|
||||
* generate (with n = 0, k = 0, m = 3), so every other frequency
|
||||
* somehow relates to this frequency.
|
||||
*/
|
||||
if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4)
|
||||
*m = 2;
|
||||
/*
|
||||
* If the frequency is a multiple of 6MHz, but the factor is
|
||||
* odd, m will be 3
|
||||
*/
|
||||
else if ((freq_mhz / 6) & 1)
|
||||
*m = 3;
|
||||
/* Otherwise, we end up with m = 1 */
|
||||
else
|
||||
*m = 1;
|
||||
|
||||
/* Calculate n thanks to the above factors we already got */
|
||||
*n = freq_mhz * (*m + 1) / ((*k + 1) * parent_freq_mhz) - 1;
|
||||
|
||||
/*
|
||||
* If n end up being outbound, and that we can still decrease
|
||||
* m, do it.
|
||||
*/
|
||||
if ((*n + 1) > 31 && (*m + 1) > 1) {
|
||||
*n = (*n + 1) / 2 - 1;
|
||||
*m = (*m + 1) / 2 - 1;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
|
||||
|
@ -190,6 +272,15 @@ static struct clk_factors_config sun4i_pll1_config = {
|
|||
.pwidth = 2,
|
||||
};
|
||||
|
||||
static struct clk_factors_config sun6i_a31_pll1_config = {
|
||||
.nshift = 8,
|
||||
.nwidth = 5,
|
||||
.kshift = 4,
|
||||
.kwidth = 2,
|
||||
.mshift = 0,
|
||||
.mwidth = 2,
|
||||
};
|
||||
|
||||
static struct clk_factors_config sun4i_apb1_config = {
|
||||
.mshift = 0,
|
||||
.mwidth = 5,
|
||||
|
@ -202,6 +293,11 @@ static const __initconst struct factors_data sun4i_pll1_data = {
|
|||
.getter = sun4i_get_pll1_factors,
|
||||
};
|
||||
|
||||
static const __initconst struct factors_data sun6i_a31_pll1_data = {
|
||||
.table = &sun6i_a31_pll1_config,
|
||||
.getter = sun6i_a31_get_pll1_factors,
|
||||
};
|
||||
|
||||
static const __initconst struct factors_data sun4i_apb1_data = {
|
||||
.table = &sun4i_apb1_config,
|
||||
.getter = sun4i_get_apb1_factors,
|
||||
|
@ -244,6 +340,10 @@ static const __initconst struct mux_data sun4i_cpu_mux_data = {
|
|||
.shift = 16,
|
||||
};
|
||||
|
||||
static const __initconst struct mux_data sun6i_a31_ahb1_mux_data = {
|
||||
.shift = 12,
|
||||
};
|
||||
|
||||
static const __initconst struct mux_data sun4i_apb1_mux_data = {
|
||||
.shift = 24,
|
||||
};
|
||||
|
@ -303,6 +403,12 @@ static const __initconst struct div_data sun4i_apb0_data = {
|
|||
.width = 2,
|
||||
};
|
||||
|
||||
static const __initconst struct div_data sun6i_a31_apb2_div_data = {
|
||||
.shift = 0,
|
||||
.pow = 0,
|
||||
.width = 4,
|
||||
};
|
||||
|
||||
static void __init sunxi_divider_clk_setup(struct device_node *node,
|
||||
struct div_data *data)
|
||||
{
|
||||
|
@ -353,6 +459,10 @@ static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
|
|||
.mask = {0x107067e7, 0x185111},
|
||||
};
|
||||
|
||||
static const __initconst struct gates_data sun6i_a31_ahb1_gates_data = {
|
||||
.mask = {0xEDFE7F62, 0x794F931},
|
||||
};
|
||||
|
||||
static const __initconst struct gates_data sun4i_apb0_gates_data = {
|
||||
.mask = {0x4EF},
|
||||
};
|
||||
|
@ -377,6 +487,14 @@ static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
|
|||
.mask = {0xa0007},
|
||||
};
|
||||
|
||||
static const __initconst struct gates_data sun6i_a31_apb1_gates_data = {
|
||||
.mask = {0x3031},
|
||||
};
|
||||
|
||||
static const __initconst struct gates_data sun6i_a31_apb2_gates_data = {
|
||||
.mask = {0x3F000F},
|
||||
};
|
||||
|
||||
static void __init sunxi_gates_clk_setup(struct device_node *node,
|
||||
struct gates_data *data)
|
||||
{
|
||||
|
@ -429,6 +547,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
|
|||
/* Matches for factors clocks */
|
||||
static const __initconst struct of_device_id clk_factors_match[] = {
|
||||
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
|
||||
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
|
||||
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
|
||||
{}
|
||||
};
|
||||
|
@ -438,6 +557,7 @@ static const __initconst struct of_device_id clk_div_match[] = {
|
|||
{.compatible = "allwinner,sun4i-axi-clk", .data = &sun4i_axi_data,},
|
||||
{.compatible = "allwinner,sun4i-ahb-clk", .data = &sun4i_ahb_data,},
|
||||
{.compatible = "allwinner,sun4i-apb0-clk", .data = &sun4i_apb0_data,},
|
||||
{.compatible = "allwinner,sun6i-a31-apb2-div-clk", .data = &sun6i_a31_apb2_div_data,},
|
||||
{}
|
||||
};
|
||||
|
||||
|
@ -445,6 +565,7 @@ static const __initconst struct of_device_id clk_div_match[] = {
|
|||
static const __initconst struct of_device_id clk_mux_match[] = {
|
||||
{.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
|
||||
{.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
|
||||
{.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
|
||||
{}
|
||||
};
|
||||
|
||||
|
@ -454,12 +575,15 @@ static const __initconst struct of_device_id clk_gates_match[] = {
|
|||
{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
|
||||
{.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
|
||||
{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
|
||||
{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
|
||||
{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
|
||||
{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
|
||||
{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
|
||||
{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
|
||||
{.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
|
||||
{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
|
||||
{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
|
||||
{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
|
||||
{}
|
||||
};
|
||||
|
||||
|
|
Loading…
Reference in a new issue