redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

ARM: ux500: move MSP pin control to the device tree 

This moves the static, device-tied pin control configuration
out of the board file board-mop500-pins.c and into the device
tree. Add nodes for MSP0 and MSP2 on the HREF and Snowball
so we can reference the pins properly.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
wifi-calibration
Linus Walleij 2013-11-13 14:45:06 +01:00
parent 1e66235330
commit 70b41abc15
4 changed files with 91 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
View File

@ -425,6 +425,69 @@
};
};
};
/*
* Multi-rate serial ports (MSPs) - MSP3 output is internal and
* cannot be muxed onto any pins.
*/
msp0 {
msp0_default_mode: msp0_default {
default_msp0_mux {
ste,function = "msp0";
ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1";
};
default_msp0_cfg {
ste,pins =
"GPIO12_AC4", /* TXD */
"GPIO15_AC3", /* RXD */
"GPIO13_AF3", /* TFS */
"GPIO14_AE3"; /* TCK */
ste,config = <&in_nopull>;
};
};
};
msp1 {
msp1_default_mode: msp1_default {
default_mux {
ste,function = "msp1";
ste,pins = "msp1txrx_a_1", "msp1_a_1";
};
default_cfg1 {
ste,pins = "GPIO33_AF2";
ste,config = <&out_lo>;
};
default_cfg2 {
ste,pins =
"GPIO34_AE1",
"GPIO35_AE2",
"GPIO36_AG2";
ste,config = <&in_nopull>;
};
};
};
msp2 {
msp2_default_mode: msp2_default {
/* MSP2 usually used for HDMI audio */
default_mux {
ste,function = "msp2";
ste,pins = "msp2_a_1";
};
default_cfg1 {
ste,pins =
"GPIO193_AH27", /* TXD */
"GPIO194_AF27", /* TCK */
"GPIO195_AG28"; /* TFS */
ste,config = <&in_pd>;
};
default_cfg2 {
ste,pins = "GPIO196_AG26"; /* RXD */
ste,config = <&out_lo>;
};
};
};
};
};
};

14
arch/arm/boot/dts/ste-href.dtsi
View File

@ -180,7 +180,21 @@
stericsson,audio-codec = <&codec>;
};
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
pinctrl-0 = <&msp1_default_mode>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
status = "okay";
};

14
arch/arm/boot/dts/ste-snowball.dts
View File

@ -93,7 +93,21 @@
stericsson,audio-codec = <&codec>;
};
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
pinctrl-0 = <&msp1_default_mode>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
status = "okay";
};

30
arch/arm/mach-ux500/board-mop500-pins.c
View File

@ -28,12 +28,10 @@ static enum custom_pin_cfg_t pinsfor;
BIAS(pd, PIN_PULL_DOWN);
BIAS(in_nopull, PIN_INPUT_NOPULL);
BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
BIAS(in_pu, PIN_INPUT_PULLUP);
BIAS(in_pd, PIN_INPUT_PULLDOWN);
BIAS(out_hi, PIN_OUTPUT_HIGH);
BIAS(out_lo, PIN_OUTPUT_LOW);
BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
@ -334,22 +332,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
/*
* uMSP0, mux in 4 pins, regular placement of RX/TX
* explicitly set the pins to no pull
*/
DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
/* MSP2 for HDMI, pull down TXD, TCK, TFS */
DB8500_MUX_HOG("msp2_a_1", "msp2"),
DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
/*
* LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
* pull-up
@ -363,18 +345,6 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
* TODO: set for snowball and HREF really??
*/
DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
/*
* The following pin sets were known as "runtime pins" before being
* converted to the pinctrl model. Here we model them as "default"
* states.
*/
/* MSP1 for ALSA codec */
DB8500_MUX_HOG("msp1txrx_a_1", "msp1"),
DB8500_MUX_HOG("msp1_a_1", "msp1"),
DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup),
DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup),
DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup),
DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup),
/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),