Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>wifi-calibration
David S. Miller
commit
71a83a6db6
|
|
@ -35,3 +35,11 @@ Contact: Corentin Chary <corentin.chary@gmail.com>
|
|||
Description: Use your USB ports to charge devices, even
|
||||
when your laptop is powered off.
|
||||
1 means enabled, 0 means disabled.
|
||||
|
||||
What: /sys/devices/platform/samsung/lid_handling
|
||||
Date: December 11, 2014
|
||||
KernelVersion: 3.19
|
||||
Contact: Julijonas Kikutis <julijonas.kikutis@gmail.com>
|
||||
Description: Some Samsung laptops handle lid closing quicker and
|
||||
only handle lid opening with this mode enabled.
|
||||
1 means enabled, 0 means disabled.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,114 @@
|
|||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_mode
|
||||
Date: June 8, 2014
|
||||
KernelVersion: 3.15
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file controls the keyboard backlight operation mode, valid
|
||||
values are:
|
||||
* 0x1 -> FN-Z
|
||||
* 0x2 -> AUTO (also called TIMER)
|
||||
* 0x8 -> ON
|
||||
* 0x10 -> OFF
|
||||
Note that the kernel 3.16 onwards this file accepts all listed
|
||||
parameters, kernel 3.15 only accepts the first two (FN-Z and
|
||||
AUTO).
|
||||
Users: KToshiba
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout
|
||||
Date: June 8, 2014
|
||||
KernelVersion: 3.15
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file controls the timeout of the keyboard backlight
|
||||
whenever the operation mode is set to AUTO (or TIMER),
|
||||
valid values range from 0-60.
|
||||
Note that the kernel 3.15 only had support for the first
|
||||
keyboard type, the kernel 3.16 added support for the second
|
||||
type and the range accepted for type 2 is 1-60.
|
||||
See the entry named "kbd_type"
|
||||
Users: KToshiba
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/position
|
||||
Date: June 8, 2014
|
||||
KernelVersion: 3.15
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file shows the absolute position of the built-in
|
||||
accelereometer.
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/touchpad
|
||||
Date: June 8, 2014
|
||||
KernelVersion: 3.15
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This files controls the status of the touchpad and pointing
|
||||
stick (if available), valid values are:
|
||||
* 0 -> OFF
|
||||
* 1 -> ON
|
||||
Users: KToshiba
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/available_kbd_modes
|
||||
Date: August 3, 2014
|
||||
KernelVersion: 3.16
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file shows the supported keyboard backlight modes
|
||||
the system supports, which can be:
|
||||
* 0x1 -> FN-Z
|
||||
* 0x2 -> AUTO (also called TIMER)
|
||||
* 0x8 -> ON
|
||||
* 0x10 -> OFF
|
||||
Note that not all keyboard types support the listed modes.
|
||||
See the entry named "available_kbd_modes"
|
||||
Users: KToshiba
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_type
|
||||
Date: August 3, 2014
|
||||
KernelVersion: 3.16
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file shows the current keyboard backlight type,
|
||||
which can be:
|
||||
* 1 -> Type 1, supporting modes FN-Z and AUTO
|
||||
* 2 -> Type 2, supporting modes TIMER, ON and OFF
|
||||
Users: KToshiba
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version
|
||||
Date: February, 2015
|
||||
KernelVersion: 3.20
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file shows the current version of the driver
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan
|
||||
Date: February, 2015
|
||||
KernelVersion: 3.20
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file controls the state of the internal fan, valid
|
||||
values are:
|
||||
* 0 -> OFF
|
||||
* 1 -> ON
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys
|
||||
Date: February, 2015
|
||||
KernelVersion: 3.20
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file controls the Special Functions (hotkeys) operation
|
||||
mode, valid values are:
|
||||
* 0 -> Normal Operation
|
||||
* 1 -> Special Functions
|
||||
In the "Normal Operation" mode, the F{1-12} keys are as usual
|
||||
and the hotkeys are accessed via FN-F{1-12}.
|
||||
In the "Special Functions" mode, the F{1-12} keys trigger the
|
||||
hotkey and the F{1-12} keys are accessed via FN-F{1-12}.
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on
|
||||
Date: February, 2015
|
||||
KernelVersion: 3.20
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file controls whether the laptop should turn ON whenever
|
||||
the LID is opened, valid values are:
|
||||
* 0 -> Disabled
|
||||
* 1 -> Enabled
|
||||
|
||||
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three
|
||||
Date: February, 2015
|
||||
KernelVersion: 3.20
|
||||
Contact: Azael Avalos <coproscefalo@gmail.com>
|
||||
Description: This file controls whether the USB 3 functionality, valid
|
||||
values are:
|
||||
* 0 -> Disabled (Acts as a regular USB 2)
|
||||
* 1 -> Enabled (Full USB 3 functionality)
|
||||
|
|
@ -197,6 +197,7 @@
|
|||
may be configured as a kernel built-in or a kernel loadable module.
|
||||
You can only make use of <constant>kgdbwait</constant> and early
|
||||
debugging if you build kgdboc into the kernel as a built-in.
|
||||
</para>
|
||||
<para>Optionally you can elect to activate kms (Kernel Mode
|
||||
Setting) integration. When you use kms with kgdboc and you have a
|
||||
video driver that has atomic mode setting hooks, it is possible to
|
||||
|
|
@ -206,7 +207,6 @@
|
|||
crashes or doing analysis of memory with kdb while allowing the
|
||||
full graphics console applications to run.
|
||||
</para>
|
||||
</para>
|
||||
<sect2 id="kgdbocArgs">
|
||||
<title>kgdboc arguments</title>
|
||||
<para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
|
||||
|
|
@ -284,7 +284,6 @@
|
|||
</listitem>
|
||||
</orderedlist>
|
||||
</para>
|
||||
</sect3>
|
||||
<para>NOTE: Kgdboc does not support interrupting the target via the
|
||||
gdb remote protocol. You must manually send a sysrq-g unless you
|
||||
have a proxy that splits console output to a terminal program.
|
||||
|
|
@ -305,6 +304,7 @@
|
|||
as well as on the initial connect, or to use a debugger proxy that
|
||||
allows an unmodified gdb to do the debugging.
|
||||
</para>
|
||||
</sect3>
|
||||
</sect2>
|
||||
</sect1>
|
||||
<sect1 id="kgdbwait">
|
||||
|
|
@ -350,12 +350,12 @@
|
|||
</para>
|
||||
</listitem>
|
||||
</orderedlist>
|
||||
</para>
|
||||
<para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
|
||||
active system console. An example of incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
|
||||
</para>
|
||||
<para>It is possible to use this option with kgdboc on a tty that is not a system console.
|
||||
</para>
|
||||
</para>
|
||||
</sect1>
|
||||
<sect1 id="kgdbreboot">
|
||||
<title>Run time parameter: kgdbreboot</title>
|
||||
|
|
|
|||
|
|
@ -404,8 +404,8 @@ supported and the interface files "release_agent" and
|
|||
be understood as an underflow into the highest possible value, -2 or
|
||||
-10M etc. do not work, so it's not consistent.
|
||||
|
||||
memory.low, memory.high, and memory.max will use the string
|
||||
"infinity" to indicate and set the highest possible value.
|
||||
memory.low, memory.high, and memory.max will use the string "max" to
|
||||
indicate and set the highest possible value.
|
||||
|
||||
5. Planned Changes
|
||||
|
||||
|
|
|
|||
|
|
@ -73,6 +73,8 @@ the operations defined in clk.h:
|
|||
unsigned long *parent_rate);
|
||||
long (*determine_rate)(struct clk_hw *hw,
|
||||
unsigned long rate,
|
||||
unsigned long min_rate,
|
||||
unsigned long max_rate,
|
||||
unsigned long *best_parent_rate,
|
||||
struct clk_hw **best_parent_clk);
|
||||
int (*set_parent)(struct clk_hw *hw, u8 index);
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
|
|||
Otherwise #opt_params is the number of following arguments.
|
||||
|
||||
Example of optional parameters section:
|
||||
1 allow_discards
|
||||
3 allow_discards same_cpu_crypt submit_from_crypt_cpus
|
||||
|
||||
allow_discards
|
||||
Block discard requests (a.k.a. TRIM) are passed through the crypt device.
|
||||
|
|
@ -63,6 +63,19 @@ allow_discards
|
|||
used space etc.) if the discarded blocks can be located easily on the
|
||||
device later.
|
||||
|
||||
same_cpu_crypt
|
||||
Perform encryption using the same cpu that IO was submitted on.
|
||||
The default is to use an unbound workqueue so that encryption work
|
||||
is automatically balanced between available CPUs.
|
||||
|
||||
submit_from_crypt_cpus
|
||||
Disable offloading writes to a separate thread after encryption.
|
||||
There are some situations where offloading write bios from the
|
||||
encryption threads to a single thread degrades performance
|
||||
significantly. The default is to offload write bios to the same
|
||||
thread because it benefits CFQ to have writes submitted using the
|
||||
same context.
|
||||
|
||||
Example scripts
|
||||
===============
|
||||
LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
|
||||
|
|
|
|||
|
|
@ -34,6 +34,8 @@ Required Properties for Clock Controller:
|
|||
- "samsung,exynos7-clock-peris"
|
||||
- "samsung,exynos7-clock-fsys0"
|
||||
- "samsung,exynos7-clock-fsys1"
|
||||
- "samsung,exynos7-clock-mscl"
|
||||
- "samsung,exynos7-clock-aud"
|
||||
|
||||
- reg: physical base address of the controller and the length of
|
||||
memory mapped region.
|
||||
|
|
@ -53,6 +55,7 @@ Input clocks for top0 clock controller:
|
|||
- dout_sclk_bus1_pll
|
||||
- dout_sclk_cc_pll
|
||||
- dout_sclk_mfc_pll
|
||||
- dout_sclk_aud_pll
|
||||
|
||||
Input clocks for top1 clock controller:
|
||||
- fin_pll
|
||||
|
|
@ -76,6 +79,14 @@ Input clocks for peric1 clock controller:
|
|||
- sclk_uart1
|
||||
- sclk_uart2
|
||||
- sclk_uart3
|
||||
- sclk_spi0
|
||||
- sclk_spi1
|
||||
- sclk_spi2
|
||||
- sclk_spi3
|
||||
- sclk_spi4
|
||||
- sclk_i2s1
|
||||
- sclk_pcm1
|
||||
- sclk_spdif
|
||||
|
||||
Input clocks for peris clock controller:
|
||||
- fin_pll
|
||||
|
|
@ -91,3 +102,7 @@ Input clocks for fsys1 clock controller:
|
|||
- dout_aclk_fsys1_200
|
||||
- dout_sclk_mmc0
|
||||
- dout_sclk_mmc1
|
||||
|
||||
Input clocks for aud clock controller:
|
||||
- fin_pll
|
||||
- fout_aud_pll
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
NVIDIA Tegra124 Clock And Reset Controller
|
||||
NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
|
||||
|
||||
This binding uses the common clock binding:
|
||||
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
|
|
@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
|
|||
for muxing and gating Tegra's clocks, and setting their rates.
|
||||
|
||||
Required properties :
|
||||
- compatible : Should be "nvidia,tegra124-car"
|
||||
- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
|
||||
- reg : Should contain CAR registers location and length
|
||||
- clocks : Should contain phandle and clock specifiers for two clocks:
|
||||
the 32 KHz "32k_in", and the board-specific oscillator "osc".
|
||||
- #clock-cells : Should be 1.
|
||||
In clock consumers, this cell represents the clock ID exposed by the
|
||||
CAR. The assignments may be found in header file
|
||||
<dt-bindings/clock/tegra124-car.h>.
|
||||
CAR. The assignments may be found in the header files
|
||||
<dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
|
||||
to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
|
||||
(for Tegra124-specific clocks).
|
||||
- #reset-cells : Should be 1.
|
||||
In clock consumers, this cell represents the bit number in the CAR's
|
||||
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,21 @@
|
|||
Qualcomm LPASS Clock & Reset Controller Binding
|
||||
------------------------------------------------
|
||||
|
||||
Required properties :
|
||||
- compatible : shall contain only one of the following:
|
||||
|
||||
"qcom,lcc-msm8960"
|
||||
"qcom,lcc-apq8064"
|
||||
"qcom,lcc-ipq8064"
|
||||
|
||||
- reg : shall contain base register location and length
|
||||
- #clock-cells : shall contain 1
|
||||
- #reset-cells : shall contain 1
|
||||
|
||||
Example:
|
||||
clock-controller@28000000 {
|
||||
compatible = "qcom,lcc-ipq8064";
|
||||
reg = <0x28000000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
|
@ -1,6 +1,6 @@
|
|||
* Clock Block on Freescale CoreNet Platforms
|
||||
* Clock Block on Freescale QorIQ Platforms
|
||||
|
||||
Freescale CoreNet chips take primary clocking input from the external
|
||||
Freescale qoriq chips take primary clocking input from the external
|
||||
SYSCLK signal. The SYSCLK input (frequency) is multiplied using
|
||||
multiple phase locked loops (PLL) to create a variety of frequencies
|
||||
which can then be passed to a variety of internal logic, including
|
||||
|
|
@ -29,6 +29,7 @@ Required properties:
|
|||
* "fsl,t4240-clockgen"
|
||||
* "fsl,b4420-clockgen"
|
||||
* "fsl,b4860-clockgen"
|
||||
* "fsl,ls1021a-clockgen"
|
||||
Chassis clock strings include:
|
||||
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
|
||||
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ Required Properties:
|
|||
|
||||
- compatible: Must be one of the following
|
||||
- "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
|
||||
- "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
|
||||
- "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
|
||||
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
|
||||
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
|
||||
|
|
|
|||
|
|
@ -0,0 +1,33 @@
|
|||
* Renesas R8A73A4 Clock Pulse Generator (CPG)
|
||||
|
||||
The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
|
||||
and several fixed ratio dividers.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: Must be "renesas,r8a73a4-cpg-clocks"
|
||||
|
||||
- reg: Base address and length of the memory resource used by the CPG
|
||||
|
||||
- clocks: Reference to the parent clocks ("extal1" and "extal2")
|
||||
|
||||
- #clock-cells: Must be 1
|
||||
|
||||
- clock-output-names: The names of the clocks. Supported clocks are "main",
|
||||
"pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
|
||||
"m1", "m2", "zx", "zs", and "hp".
|
||||
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
cpg_clocks: cpg_clocks@e6150000 {
|
||||
compatible = "renesas,r8a73a4-cpg-clocks";
|
||||
reg = <0 0xe6150000 0 0x10000>;
|
||||
clocks = <&extal1_clk>, <&extal2_clk>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "main", "pll0", "pll1", "pll2",
|
||||
"pll2s", "pll2h", "z", "z2",
|
||||
"i", "m3", "b", "m1", "m2",
|
||||
"zx", "zs", "hp";
|
||||
};
|
||||
|
|
@ -8,15 +8,18 @@ Required Properties:
|
|||
- compatible: Must be one of
|
||||
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
|
||||
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
|
||||
- "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
|
||||
- "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
|
||||
- "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
|
||||
|
||||
- reg: Base address and length of the memory resource used by the CPG
|
||||
|
||||
- clocks: Reference to the parent clock
|
||||
- clocks: References to the parent clocks: first to the EXTAL clock, second
|
||||
to the USB_EXTAL clock
|
||||
- #clock-cells: Must be 1
|
||||
- clock-output-names: The names of the clocks. Supported clocks are "main",
|
||||
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
|
||||
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
|
||||
"adsp"
|
||||
|
||||
|
||||
Example
|
||||
|
|
@ -26,8 +29,9 @@ Example
|
|||
compatible = "renesas,r8a7790-cpg-clocks",
|
||||
"renesas,rcar-gen2-cpg-clocks";
|
||||
reg = <0 0xe6150000 0 0x1000>;
|
||||
clocks = <&extal_clk>;
|
||||
clocks = <&extal_clk &usb_extal_clk>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "main", "pll0, "pll1", "pll3",
|
||||
"lb", "qspi", "sdh", "sd0", "sd1", "z";
|
||||
"lb", "qspi", "sdh", "sd0", "sd1", "z",
|
||||
"rcan", "adsp";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@ Required properties:
|
|||
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
|
||||
"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
|
||||
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
|
||||
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
|
||||
"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
|
||||
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
|
||||
"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
|
||||
"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
|
||||
|
|
@ -55,9 +55,11 @@ Required properties:
|
|||
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
|
||||
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
|
||||
"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
|
||||
"allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10
|
||||
"allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10
|
||||
"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
|
||||
"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
|
||||
"allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
|
||||
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
|
||||
"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
|
||||
"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
|
||||
"allwinner,sun7i-a20-out-clk" - for the external output clocks
|
||||
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
|
||||
|
|
@ -73,7 +75,9 @@ Required properties for all clocks:
|
|||
- #clock-cells : from common clock binding; shall be set to 0 except for
|
||||
the following compatibles where it shall be set to 1:
|
||||
"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
|
||||
"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk"
|
||||
"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
|
||||
"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
|
||||
"allwinner,*-mmc-config-clk"
|
||||
- clock-output-names : shall be the corresponding names of the outputs.
|
||||
If the clock module only has one output, the name shall be the
|
||||
module name.
|
||||
|
|
@ -81,6 +85,10 @@ Required properties for all clocks:
|
|||
And "allwinner,*-usb-clk" clocks also require:
|
||||
- reset-cells : shall be set to 1
|
||||
|
||||
The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
|
||||
- #reset-cells : shall be set to 1
|
||||
- resets : shall be the reset control phandle for the mmc block.
|
||||
|
||||
For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
|
||||
dummy clocks at 25 MHz and 125 MHz, respectively. See example.
|
||||
|
||||
|
|
@ -95,6 +103,14 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
|
|||
is the normal PLL6 output, or "pll6". The second output is rate doubled
|
||||
PLL6, or "pll6x2".
|
||||
|
||||
The "allwinner,*-mmc-clk" clocks have three different outputs: the
|
||||
main clock, with the ID 0, and the output and sample clocks, with the
|
||||
IDs 1 and 2, respectively.
|
||||
|
||||
The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
|
||||
per mmc controller. The number of outputs is determined by the size of
|
||||
the address block, which is related to the overall mmc block.
|
||||
|
||||
For example:
|
||||
|
||||
osc24M: clk@01c20050 {
|
||||
|
|
@ -138,11 +154,11 @@ cpu: cpu@01c20054 {
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc0";
|
||||
clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
|
||||
};
|
||||
|
||||
mii_phy_tx_clk: clk@2 {
|
||||
|
|
@ -170,3 +186,16 @@ gmac_clk: clk@01c20164 {
|
|||
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
|
||||
clock-output-names = "gmac";
|
||||
};
|
||||
|
||||
mmc_config_clk: clk@01c13000 {
|
||||
compatible = "allwinner,sun9i-a80-mmc-config-clk";
|
||||
reg = <0x01c13000 0x10>;
|
||||
clocks = <&ahb0_gates 8>;
|
||||
clock-names = "ahb";
|
||||
resets = <&ahb0_resets 8>;
|
||||
reset-names = "ahb";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
clock-output-names = "mmc0_config", "mmc1_config",
|
||||
"mmc2_config", "mmc3_config";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,42 @@
|
|||
Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
|
||||
synthesizer/multiplier/divider.
|
||||
|
||||
Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
|
||||
|
||||
I2C device node required properties:
|
||||
- compatible: shall be "ti,cdce706".
|
||||
- reg: i2c device address, shall be in range [0x68...0x6b].
|
||||
- #clock-cells: from common clock binding; shall be set to 1.
|
||||
- clocks: from common clock binding; list of parent clock
|
||||
handles, shall be reference clock(s) connected to CLK_IN0
|
||||
and CLK_IN1 pins.
|
||||
- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
|
||||
in case of crystal oscillator or differential signal input
|
||||
configuration. Use clk_in0 and clk_in1 in case of independent
|
||||
single-ended LVCMOS inputs configuration.
|
||||
|
||||
Example:
|
||||
|
||||
clocks {
|
||||
clk54: clk54 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <54000000>;
|
||||
};
|
||||
};
|
||||
...
|
||||
i2c0: i2c-master@0d090000 {
|
||||
...
|
||||
cdce706: clock-synth@69 {
|
||||
compatible = "ti,cdce706";
|
||||
#clock-cells = <1>;
|
||||
reg = <0x69>;
|
||||
clocks = <&clk54>;
|
||||
clock-names = "clk_in0";
|
||||
};
|
||||
};
|
||||
...
|
||||
simple-audio-card,codec {
|
||||
...
|
||||
clocks = <&cdce706 4>;
|
||||
};
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
Binding for Texas Instruments FAPLL clock.
|
||||
|
||||
Binding status: Unstable - ABI compatibility may be broken in the future
|
||||
|
||||
This binding uses the common clock binding[1]. It assumes a
|
||||
register-mapped FAPLL with usually two selectable input clocks
|
||||
(reference clock and bypass clock), and one or more child
|
||||
syntesizers.
|
||||
|
||||
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
|
||||
Required properties:
|
||||
- compatible : shall be "ti,dm816-fapll-clock"
|
||||
- #clock-cells : from common clock binding; shall be set to 0.
|
||||
- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
|
||||
- reg : address and length of the register set for controlling the FAPLL.
|
||||
|
||||
Examples:
|
||||
main_fapll: main_fapll {
|
||||
#clock-cells = <1>;
|
||||
compatible = "ti,dm816-fapll-clock";
|
||||
reg = <0x400 0x40>;
|
||||
clocks = <&sys_clkin_ck &sys_clkin_ck>;
|
||||
clock-indices = <1>, <2>, <3>, <4>, <5>,
|
||||
<6>, <7>;
|
||||
clock-output-names = "main_pll_clk1",
|
||||
"main_pll_clk2",
|
||||
"main_pll_clk3",
|
||||
"main_pll_clk4",
|
||||
"main_pll_clk5",
|
||||
"main_pll_clk6",
|
||||
"main_pll_clk7";
|
||||
};
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
* IMG Multi-threaded DMA Controller (MDC)
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "img,pistachio-mdc-dma".
|
||||
- reg: Must contain the base address and length of the MDC registers.
|
||||
- interrupts: Must contain all the per-channel DMA interrupts.
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
See ../clock/clock-bindings.txt for details.
|
||||
- clock-names: Must include the following entries:
|
||||
- sys: MDC system interface clock.
|
||||
- img,cr-periph: Must contain a phandle to the peripheral control syscon
|
||||
node which contains the DMA request to channel mapping registers.
|
||||
- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
|
||||
The maximum burst size is this value multiplied by the hardware-reported bus
|
||||
width.
|
||||
- #dma-cells: Must be 3:
|
||||
- The first cell is the peripheral's DMA request line.
|
||||
- The second cell is a bitmap specifying to which channels the DMA request
|
||||
line may be mapped (i.e. bit N set indicates channel N is usable).
|
||||
- The third cell is the thread ID to be used by the channel.
|
||||
|
||||
Optional properties:
|
||||
- dma-channels: Number of supported DMA channels, up to 32. If not specified
|
||||
the number reported by the hardware is used.
|
||||
|
||||
Example:
|
||||
|
||||
mdc: dma-controller@18143000 {
|
||||
compatible = "img,pistachio-mdc-dma";
|
||||
reg = <0x18143000 0x1000>;
|
||||
interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&system_clk>;
|
||||
clock-names = "sys";
|
||||
|
||||
img,max-burst-multiplier = <16>;
|
||||
img,cr-periph = <&cr_periph>;
|
||||
|
||||
#dma-cells = <3>;
|
||||
};
|
||||
|
||||
spi@18100f00 {
|
||||
...
|
||||
dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
|
||||
dma-names = "tx", "rx";
|
||||
...
|
||||
};
|
||||
|
|
@ -5,9 +5,6 @@ controller instances named DMAC capable of serving multiple clients. Channels
|
|||
can be dedicated to specific clients or shared between a large number of
|
||||
clients.
|
||||
|
||||
DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
|
||||
called MID/RID.
|
||||
|
||||
Each DMA client is connected to one dedicated port of the DMAC, identified by
|
||||
an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
|
||||
256 clients in total. When the number of hardware channels is lower than the
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ Example:
|
|||
chan_allocation_order = <1>;
|
||||
chan_priority = <1>;
|
||||
block_size = <0xfff>;
|
||||
data_width = <3 3 0 0>;
|
||||
data_width = <3 3>;
|
||||
};
|
||||
|
||||
DMA clients connected to the Designware DMA controller must use the format
|
||||
|
|
|
|||
|
|
@ -0,0 +1,37 @@
|
|||
Broadcom iProc I2C controller
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible:
|
||||
Must be "brcm,iproc-i2c"
|
||||
|
||||
- reg:
|
||||
Define the base and range of the I/O address space that contain the iProc
|
||||
I2C controller registers
|
||||
|
||||
- interrupts:
|
||||
Should contain the I2C interrupt
|
||||
|
||||
- clock-frequency:
|
||||
This is the I2C bus clock. Need to be either 100000 or 400000
|
||||
|
||||
- #address-cells:
|
||||
Always 1 (for I2C addresses)
|
||||
|
||||
- #size-cells:
|
||||
Always 0
|
||||
|
||||
Example:
|
||||
i2c0: i2c@18008000 {
|
||||
compatible = "brcm,iproc-i2c";
|
||||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
codec: wm8750@1a {
|
||||
compatible = "wlf,wm8750";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
|
@ -16,6 +16,9 @@ Required Properties:
|
|||
Optional Properties:
|
||||
|
||||
- reset-gpios: Reference to the GPIO connected to the reset input.
|
||||
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
|
||||
children in idle state. This is necessary for example, if there are several
|
||||
multiplexers on the bus and the devices behind them use same I2C addresses.
|
||||
|
||||
|
||||
Example:
|
||||
|
|
|
|||
|
|
@ -4,16 +4,34 @@ Required properties:
|
|||
- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
|
||||
- reg : bus address start and address range size of device
|
||||
- interrupts : interrupt number
|
||||
- clock-frequency : frequency of bus clock in Hz
|
||||
- clocks : handle to the controller clock; see the note below.
|
||||
Mutually exclusive with opencores,ip-clock-frequency
|
||||
- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
|
||||
see the note below. Mutually exclusive with clocks
|
||||
- #address-cells : should be <1>
|
||||
- #size-cells : should be <0>
|
||||
|
||||
Optional properties:
|
||||
- clock-frequency : frequency of bus clock in Hz; see the note below.
|
||||
Defaults to 100 KHz when the property is not specified
|
||||
- reg-shift : device register offsets are shifted by this value
|
||||
- reg-io-width : io register width in bytes (1, 2 or 4)
|
||||
- regstep : deprecated, use reg-shift above
|
||||
|
||||
Example:
|
||||
Note
|
||||
clock-frequency property is meant to control the bus frequency for i2c bus
|
||||
drivers, but it was incorrectly used to specify i2c controller input clock
|
||||
frequency. So the following rules are set to fix this situation:
|
||||
- if clock-frequency is present and neither opencores,ip-clock-frequency nor
|
||||
clocks are, then clock-frequency specifies i2c controller clock frequency.
|
||||
This is to keep backwards compatibility with setups using old DTB. i2c bus
|
||||
frequency is fixed at 100 KHz.
|
||||
- if clocks is present it specifies i2c controller clock. clock-frequency
|
||||
property specifies i2c bus frequency.
|
||||
- if opencores,ip-clock-frequency is present it specifies i2c controller
|
||||
clock frequency. clock-frequency property specifies i2c bus frequency.
|
||||
|
||||
Examples:
|
||||
|
||||
i2c0: ocores@a0000000 {
|
||||
#address-cells = <1>;
|
||||
|
|
@ -21,7 +39,25 @@ Example:
|
|||
compatible = "opencores,i2c-ocores";
|
||||
reg = <0xa0000000 0x8>;
|
||||
interrupts = <10>;
|
||||
clock-frequency = <20000000>;
|
||||
opencores,ip-clock-frequency = <20000000>;
|
||||
|
||||
reg-shift = <0>; /* 8 bit registers */
|
||||
reg-io-width = <1>; /* 8 bit read/write */
|
||||
|
||||
dummy@60 {
|
||||
compatible = "dummy";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
or
|
||||
i2c0: ocores@a0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "opencores,i2c-ocores";
|
||||
reg = <0xa0000000 0x8>;
|
||||
interrupts = <10>;
|
||||
clocks = <&osc>;
|
||||
clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
|
||||
|
||||
reg-shift = <0>; /* 8 bit registers */
|
||||
reg-io-width = <1>; /* 8 bit read/write */
|
||||
|
|
|
|||
|
|
@ -21,6 +21,17 @@ Required on RK3066, RK3188 :
|
|||
Optional properties :
|
||||
|
||||
- clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
|
||||
- i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
|
||||
(t(r) in I2C specification). If not specified this is assumed to be
|
||||
the maximum the specification allows(1000 ns for Standard-mode,
|
||||
300 ns for Fast-mode) which might cause slightly slower communication.
|
||||
- i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
|
||||
(t(f) in the I2C specification). If not specified this is assumed to
|
||||
be the maximum the specification allows (300 ns) which might cause
|
||||
slightly slower communication.
|
||||
- i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
|
||||
(t(f) in the I2C specification). If not specified we'll use the SCL
|
||||
value since they are the same in nearly all cases.
|
||||
|
||||
Example:
|
||||
|
||||
|
|
@ -39,4 +50,7 @@ i2c0: i2c@2002d000 {
|
|||
|
||||
clock-names = "i2c";
|
||||
clocks = <&cru PCLK_I2C0>;
|
||||
|
||||
i2c-scl-rising-time-ns = <800>;
|
||||
i2c-scl-falling-time-ns = <100>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -61,9 +61,8 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec
|
|||
gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
|
||||
infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
|
||||
infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz)
|
||||
isl,isl12057 Intersil ISL12057 I2C RTC Chip
|
||||
isil,isl29028 (deprecated, use isl)
|
||||
isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor
|
||||
isil,isl12057 Intersil ISL12057 I2C RTC Chip
|
||||
isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor
|
||||
maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
|
||||
maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
|
||||
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
|
||||
|
|
|
|||
|
|
@ -0,0 +1,93 @@
|
|||
* Dialog DA9063 Power Management Integrated Circuit (PMIC)
|
||||
|
||||
DA9093 consists of a large and varied group of sub-devices (I2C Only):
|
||||
|
||||
Device Supply Names Description
|
||||
------ ------------ -----------
|
||||
da9063-regulator : : LDOs & BUCKs
|
||||
da9063-rtc : : Real-Time Clock
|
||||
da9063-watchdog : : Watchdog
|
||||
|
||||
======
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : Should be "dlg,da9063"
|
||||
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
|
||||
modified to match the chip's OTP settings).
|
||||
- interrupt-parent : Specifies the reference to the interrupt controller for
|
||||
the DA9063.
|
||||
- interrupts : IRQ line information.
|
||||
- interrupt-controller
|
||||
|
||||
Sub-nodes:
|
||||
|
||||
- regulators : This node defines the settings for the LDOs and BUCKs. The
|
||||
DA9063 regulators are bound using their names listed below:
|
||||
|
||||
bcore1 : BUCK CORE1
|
||||
bcore2 : BUCK CORE2
|
||||
bpro : BUCK PRO
|
||||
bmem : BUCK MEM
|
||||
bio : BUCK IO
|
||||
bperi : BUCK PERI
|
||||
ldo1 : LDO_1
|
||||
ldo2 : LDO_2
|
||||
ldo3 : LDO_3
|
||||
ldo4 : LDO_4
|
||||
ldo5 : LDO_5
|
||||
ldo6 : LDO_6
|
||||
ldo7 : LDO_7
|
||||
ldo8 : LDO_8
|
||||
ldo9 : LDO_9
|
||||
ldo10 : LDO_10
|
||||
ldo11 : LDO_11
|
||||
|
||||
The component follows the standard regulator framework and the bindings
|
||||
details of individual regulator device can be found in:
|
||||
Documentation/devicetree/bindings/regulator/regulator.txt
|
||||
|
||||
- rtc : This node defines settings for the Real-Time Clock associated with
|
||||
the DA9063. There are currently no entries in this binding, however
|
||||
compatible = "dlg,da9063-rtc" should be added if a node is created.
|
||||
|
||||
- watchdog : This node defines settings for the Watchdog timer associated
|
||||
with the DA9063. There are currently no entries in this binding, however
|
||||
compatible = "dlg,da9063-watchdog" should be added if a node is created.
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
pmic0: da9063@58 {
|
||||
compatible = "dlg,da9063"
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
wdt {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
|
||||
regulators {
|
||||
DA9063_BCORE1: bcore1 {
|
||||
regulator-name = "BCORE1";
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1570000>;
|
||||
regulator-min-microamp = <500000>;
|
||||
regulator-max-microamp = <2000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
DA9063_LDO11: ldo11 {
|
||||
regulator-name = "LDO_11";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,70 @@
|
|||
Qualcomm Resource Power Manager (RPM)
|
||||
|
||||
This driver is used to interface with the Resource Power Manager (RPM) found in
|
||||
various Qualcomm platforms. The RPM allows each component in the system to vote
|
||||
for state of the system resources, such as clocks, regulators and bus
|
||||
frequencies.
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: must be one of:
|
||||
"qcom,rpm-apq8064"
|
||||
"qcom,rpm-msm8660"
|
||||
"qcom,rpm-msm8960"
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: base address and size of the RPM's message ram
|
||||
|
||||
- interrupts:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: three entries specifying the RPM's:
|
||||
1. acknowledgement interrupt
|
||||
2. error interrupt
|
||||
3. wakeup interrupt
|
||||
|
||||
- interrupt-names:
|
||||
Usage: required
|
||||
Value type: <string-array>
|
||||
Definition: must be the three strings "ack", "err" and "wakeup", in order
|
||||
|
||||
- #address-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: must be 1
|
||||
|
||||
- #size-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: must be 0
|
||||
|
||||
- qcom,ipc:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
|
||||
Definition: three entries specifying the outgoing ipc bit used for
|
||||
signaling the RPM:
|
||||
- phandle to a syscon node representing the apcs registers
|
||||
- u32 representing offset to the register within the syscon
|
||||
- u32 representing the ipc bit within the register
|
||||
|
||||
|
||||
= EXAMPLE
|
||||
|
||||
#include <dt-bindings/mfd/qcom-rpm.h>
|
||||
|
||||
rpm@108000 {
|
||||
compatible = "qcom,rpm-msm8960";
|
||||
reg = <0x108000 0x1000>;
|
||||
qcom,ipc = <&apcs 0x8 2>;
|
||||
|
||||
interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
|
||||
interrupt-names = "ack", "err", "wakeup";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
* Cavium Interrupt Bus widget
|
||||
|
||||
Properties:
|
||||
- compatible: "cavium,octeon-7130-cib"
|
||||
|
||||
Compatibility with cn70XX SoCs.
|
||||
|
||||
- interrupt-controller: This is an interrupt controller.
|
||||
|
||||
- reg: Two elements consisting of the addresses of the RAW and EN
|
||||
registers of the CIB block
|
||||
|
||||
- cavium,max-bits: The index (zero based) of the highest numbered bit
|
||||
in the CIB block.
|
||||
|
||||
- interrupt-parent: Always the CIU on the SoC.
|
||||
|
||||
- interrupts: The CIU line to which the CIB block is connected.
|
||||
|
||||
- #interrupt-cells: Must be <2>. The first cell is the bit within the
|
||||
CIB. The second cell specifies the triggering semantics of the
|
||||
line.
|
||||
|
||||
Example:
|
||||
|
||||
interrupt-controller@107000000e000 {
|
||||
compatible = "cavium,octeon-7130-cib";
|
||||
reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
|
||||
<0x10700 0x0000e100 0x0 0x8>; /* EN */
|
||||
cavium,max-bits = <23>;
|
||||
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&ciu>;
|
||||
interrupts = <1 24>;
|
||||
/* Interrupts are specified by two parts:
|
||||
* 1) Bit number in the CIB* registers
|
||||
* 2) Triggering (1 - edge rising
|
||||
* 2 - edge falling
|
||||
* 4 - level active high
|
||||
* 8 - level active low)
|
||||
*/
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
|
@ -10,8 +10,8 @@ Absolute maximum transfer rate is 200MB/s
|
|||
Required properties:
|
||||
- compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
|
||||
- reg : mmc controller base registers
|
||||
- clocks : a list with 2 phandle + clock specifier pairs
|
||||
- clock-names : must contain "ahb" and "mmc"
|
||||
- clocks : a list with 4 phandle + clock specifier pairs
|
||||
- clock-names : must contain "ahb", "mmc", "output" and "sample"
|
||||
- interrupts : mmc controller interrupt
|
||||
|
||||
Optional properties:
|
||||
|
|
@ -25,8 +25,8 @@ Examples:
|
|||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mod";
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
|
||||
clock-names = "ahb", "mod", "output", "sample";
|
||||
interrupts = <0 32 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
Atmel NAND flash
|
||||
|
||||
Required properties:
|
||||
- compatible : "atmel,at91rm9200-nand".
|
||||
- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
|
||||
- reg : should specify localbus address and size used for the chip,
|
||||
and hardware ECC controller if available.
|
||||
If the hardware ECC is PMECC, it should contain address and size for
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
* Freescale Quad Serial Peripheral Interface(QuadSPI)
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "fsl,vf610-qspi"
|
||||
- compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
|
||||
- reg : the first contains the register location and length,
|
||||
the second contains the memory mapping address and length
|
||||
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
* Freescale General-Purpose Media Interface (GPMI)
|
||||
|
||||
The GPMI nand controller provides an interface to control the
|
||||
NAND flash chips. We support only one NAND chip now.
|
||||
NAND flash chips.
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "fsl,<chip>-gpmi-nand"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,47 @@
|
|||
Hisilicon Hip04 Soc NAND controller DT binding
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should be "hisilicon,504-nfc".
|
||||
- reg: The first contains base physical address and size of
|
||||
NAND controller's registers. The second contains base
|
||||
physical address and size of NAND controller's buffer.
|
||||
- interrupts: Interrupt number for nfc.
|
||||
- nand-bus-width: See nand.txt.
|
||||
- nand-ecc-mode: Support none and hw ecc mode.
|
||||
- #address-cells: Partition address, should be set 1.
|
||||
- #size-cells: Partition size, should be set 1.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- nand-ecc-strength: Number of bits to correct per ECC step.
|
||||
- nand-ecc-step-size: Number of data bytes covered by a single ECC step.
|
||||
|
||||
The following ECC strength and step size are currently supported:
|
||||
|
||||
- nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
|
||||
|
||||
Flash chip may optionally contain additional sub-nodes describing partitions of
|
||||
the address space. See partition.txt for more detail.
|
||||
|
||||
Example:
|
||||
|
||||
nand: nand@4020000 {
|
||||
compatible = "hisilicon,504-nfc";
|
||||
reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
|
||||
interrupts = <0 379 4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <16>;
|
||||
nand-ecc-step-size = <1024>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "nand_text";
|
||||
reg = <0x00000000 0x00400000>;
|
||||
};
|
||||
|
||||
...
|
||||
|
||||
};
|
||||
|
|
@ -36,6 +36,11 @@ are defined:
|
|||
- vendor-id : Contains the flash chip's vendor id (1 byte).
|
||||
- device-id : Contains the flash chip's device id (1 byte).
|
||||
|
||||
For ROM compatible devices (and ROM fallback from cfi-flash), the following
|
||||
additional (optional) property is defined:
|
||||
|
||||
- erase-size : The chip's physical erase block size in bytes.
|
||||
|
||||
The device tree may optionally contain sub-nodes describing partitions of the
|
||||
address space. See partition.txt for more detail.
|
||||
|
||||
|
|
|
|||
|
|
@ -27,6 +27,8 @@ property is used.
|
|||
- amd,serdes-cdr-rate: CDR rate speed selection
|
||||
- amd,serdes-pq-skew: PQ (data sampling) skew
|
||||
- amd,serdes-tx-amp: TX amplitude boost
|
||||
- amd,serdes-dfe-tap-config: DFE taps available to run
|
||||
- amd,serdes-dfe-tap-enable: DFE taps to enable
|
||||
|
||||
Example:
|
||||
xgbe_phy@e1240800 {
|
||||
|
|
@ -41,4 +43,6 @@ Example:
|
|||
amd,serdes-cdr-rate = <2>, <2>, <7>;
|
||||
amd,serdes-pq-skew = <10>, <10>, <30>;
|
||||
amd,serdes-tx-amp = <15>, <15>, <10>;
|
||||
amd,serdes-dfe-tap-config = <3>, <3>, <1>;
|
||||
amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,24 @@
|
|||
*Imagination Technologies PWM DAC driver
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "img,pistachio-pwm"
|
||||
- reg: Should contain physical base address and length of pwm registers.
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
See ../clock/clock-bindings.txt for details.
|
||||
- clock-names: Must include the following entries.
|
||||
- pwm: PWM operating clock.
|
||||
- sys: PWM system interface clock.
|
||||
- #pwm-cells: Should be 2. See pwm.txt in this directory for the
|
||||
description of the cells format.
|
||||
- img,cr-periph: Must contain a phandle to the peripheral control
|
||||
syscon node which contains PWM control registers.
|
||||
|
||||
Example:
|
||||
pwm: pwm@18101300 {
|
||||
compatible = "img,pistachio-pwm";
|
||||
reg = <0x18101300 0x100>;
|
||||
clocks = <&pwm_clk>, <&system_clk>;
|
||||
clock-names = "pwm", "sys";
|
||||
#pwm-cells = <2>;
|
||||
img,cr-periph = <&cr_periph>;
|
||||
};
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
Allwinner sun4i and sun7i SoC PWM controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of:
|
||||
- "allwinner,sun4i-a10-pwm"
|
||||
- "allwinner,sun7i-a20-pwm"
|
||||
- reg: physical base address and length of the controller's registers
|
||||
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
|
||||
the cells format.
|
||||
- clocks: From common clock binding, handle to the parent clock.
|
||||
|
||||
Example:
|
||||
|
||||
pwm: pwm@01c20e00 {
|
||||
compatible = "allwinner,sun7i-a20-pwm";
|
||||
reg = <0x01c20e00 0xc>;
|
||||
clocks = <&osc24M>;
|
||||
#pwm-cells = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -12,6 +12,7 @@
|
|||
"samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
|
||||
Exynos5420 (Must pass triminfo base and triminfo clock)
|
||||
"samsung,exynos5440-tmu"
|
||||
"samsung,exynos7-tmu"
|
||||
- interrupt-parent : The phandle for the interrupt controller
|
||||
- reg : Address range of the thermal registers. For soc's which has multiple
|
||||
instances of TMU and some registers are shared across all TMU's like
|
||||
|
|
@ -32,13 +33,28 @@
|
|||
- clocks : The main clocks for TMU device
|
||||
-- 1. operational clock for TMU channel
|
||||
-- 2. optional clock to access the shared registers of TMU channel
|
||||
-- 3. optional special clock for functional operation
|
||||
- clock-names : Thermal system clock name
|
||||
-- "tmu_apbif" operational clock for current TMU channel
|
||||
-- "tmu_triminfo_apbif" clock to access the shared triminfo register
|
||||
for current TMU channel
|
||||
-- "tmu_sclk" clock for functional operation of the current TMU
|
||||
channel
|
||||
- vtmu-supply: This entry is optional and provides the regulator node supplying
|
||||
voltage to TMU. If needed this entry can be placed inside
|
||||
board/platform specific dts file.
|
||||
Following properties are mandatory (depending on SoC):
|
||||
- samsung,tmu_gain: Gain value for internal TMU operation.
|
||||
- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
|
||||
- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
|
||||
- samsung,tmu_efuse_value: Default level of temperature - it is needed when
|
||||
in factory fusing produced wrong value
|
||||
- samsung,tmu_min_efuse_value: Minimum temperature fused value
|
||||
- samsung,tmu_max_efuse_value: Maximum temperature fused value
|
||||
- samsung,tmu_first_point_trim: First point trimming value
|
||||
- samsung,tmu_second_point_trim: Second point trimming value
|
||||
- samsung,tmu_default_temp_offset: Default temperature offset
|
||||
- samsung,tmu_cal_type: Callibration type
|
||||
|
||||
Example 1):
|
||||
|
||||
|
|
@ -51,6 +67,7 @@ Example 1):
|
|||
clock-names = "tmu_apbif";
|
||||
status = "disabled";
|
||||
vtmu-supply = <&tmu_regulator_node>;
|
||||
#include "exynos4412-tmu-sensor-conf.dtsi"
|
||||
};
|
||||
|
||||
Example 2):
|
||||
|
|
@ -61,6 +78,7 @@ Example 2):
|
|||
interrupts = <0 58 0>;
|
||||
clocks = <&clock 21>;
|
||||
clock-names = "tmu_apbif";
|
||||
#include "exynos5440-tmu-sensor-conf.dtsi"
|
||||
};
|
||||
|
||||
Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
|
||||
|
|
@ -70,6 +88,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
|
|||
interrupts = <0 184 0>;
|
||||
clocks = <&clock 318>, <&clock 318>;
|
||||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
#include "exynos4412-tmu-sensor-conf.dtsi"
|
||||
};
|
||||
|
||||
tmu_cpu3: tmu@1006c000 {
|
||||
|
|
@ -78,6 +97,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
|
|||
interrupts = <0 185 0>;
|
||||
clocks = <&clock 318>, <&clock 319>;
|
||||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
#include "exynos4412-tmu-sensor-conf.dtsi"
|
||||
};
|
||||
|
||||
tmu_gpu: tmu@100a0000 {
|
||||
|
|
@ -86,6 +106,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
|
|||
interrupts = <0 215 0>;
|
||||
clocks = <&clock 319>, <&clock 318>;
|
||||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
#include "exynos4412-tmu-sensor-conf.dtsi"
|
||||
};
|
||||
|
||||
Note: For multi-instance tmu each instance should have an alias correctly
|
||||
|
|
|
|||
|
|
@ -251,24 +251,24 @@ ocp {
|
|||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal: cpu-thermal {
|
||||
cpu_thermal: cpu-thermal {
|
||||
polling-delay-passive = <250>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
|
||||
thermal-sensors = <&bandgap0>;
|
||||
|
||||
trips {
|
||||
cpu-alert0: cpu-alert {
|
||||
cpu_alert0: cpu-alert0 {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
cpu-alert1: cpu-alert {
|
||||
cpu_alert1: cpu-alert1 {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
cpu-crit: cpu-crit {
|
||||
cpu_crit: cpu-crit {
|
||||
temperature = <125000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "critical";
|
||||
|
|
@ -277,17 +277,17 @@ thermal-zones {
|
|||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu-alert0>;
|
||||
cooling-device = <&fan0 THERMAL_NO_LIMITS 4>;
|
||||
trip = <&cpu_alert0>;
|
||||
cooling-device = <&fan0 THERMAL_NO_LIMIT 4>;
|
||||
};
|
||||
map1 {
|
||||
trip = <&cpu-alert1>;
|
||||
cooling-device = <&fan0 5 THERMAL_NO_LIMITS>;
|
||||
trip = <&cpu_alert1>;
|
||||
cooling-device = <&fan0 5 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
map2 {
|
||||
trip = <&cpu-alert1>;
|
||||
trip = <&cpu_alert1>;
|
||||
cooling-device =
|
||||
<&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>;
|
||||
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -298,13 +298,13 @@ used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
|
|||
device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten
|
||||
different cooling states 0-9. It is used to remove the heat out of
|
||||
the thermal zone 'cpu-thermal' using its cooling states
|
||||
from its minimum to 4, when it reaches trip point 'cpu-alert0'
|
||||
from its minimum to 4, when it reaches trip point 'cpu_alert0'
|
||||
at 90C, as an example of active cooling. The same cooling device is used at
|
||||
'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also
|
||||
'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also
|
||||
linked to the same thermal zone, 'cpu-thermal', as a passive cooling device,
|
||||
using all its cooling states at trip point 'cpu-alert1',
|
||||
using all its cooling states at trip point 'cpu_alert1',
|
||||
which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the
|
||||
temperature of 125C, represented by the trip point 'cpu-crit', the silicon
|
||||
temperature of 125C, represented by the trip point 'cpu_crit', the silicon
|
||||
is not reliable anymore.
|
||||
|
||||
(b) - IC with several internal sensors
|
||||
|
|
@ -329,7 +329,7 @@ ocp {
|
|||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal: cpu-thermal {
|
||||
cpu_thermal: cpu-thermal {
|
||||
polling-delay-passive = <250>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
|
||||
|
|
@ -338,12 +338,12 @@ thermal-zones {
|
|||
|
||||
trips {
|
||||
/* each zone within the SoC may have its own trips */
|
||||
cpu-alert: cpu-alert {
|
||||
cpu_alert: cpu-alert {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
cpu-crit: cpu-crit {
|
||||
cpu_crit: cpu-crit {
|
||||
temperature = <125000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "critical";
|
||||
|
|
@ -356,7 +356,7 @@ thermal-zones {
|
|||
};
|
||||
};
|
||||
|
||||
gpu-thermal: gpu-thermal {
|
||||
gpu_thermal: gpu-thermal {
|
||||
polling-delay-passive = <120>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
|
||||
|
|
@ -365,12 +365,12 @@ thermal-zones {
|
|||
|
||||
trips {
|
||||
/* each zone within the SoC may have its own trips */
|
||||
gpu-alert: gpu-alert {
|
||||
gpu_alert: gpu-alert {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
gpu-crit: gpu-crit {
|
||||
gpu_crit: gpu-crit {
|
||||
temperature = <105000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "critical";
|
||||
|
|
@ -383,7 +383,7 @@ thermal-zones {
|
|||
};
|
||||
};
|
||||
|
||||
dsp-thermal: dsp-thermal {
|
||||
dsp_thermal: dsp-thermal {
|
||||
polling-delay-passive = <50>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
|
||||
|
|
@ -392,12 +392,12 @@ thermal-zones {
|
|||
|
||||
trips {
|
||||
/* each zone within the SoC may have its own trips */
|
||||
dsp-alert: gpu-alert {
|
||||
dsp_alert: dsp-alert {
|
||||
temperature = <90000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
dsp-crit: gpu-crit {
|
||||
dsp_crit: gpu-crit {
|
||||
temperature = <135000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "critical";
|
||||
|
|
@ -457,7 +457,7 @@ ocp {
|
|||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal: cpu-thermal {
|
||||
cpu_thermal: cpu-thermal {
|
||||
polling-delay-passive = <250>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
|
||||
|
|
@ -508,7 +508,7 @@ with many sensors and many cooling devices.
|
|||
/*
|
||||
* An IC with several temperature sensor.
|
||||
*/
|
||||
adc-dummy: sensor@0x50 {
|
||||
adc_dummy: sensor@0x50 {
|
||||
...
|
||||
#thermal-sensor-cells = <1>; /* sensor internal ID */
|
||||
};
|
||||
|
|
@ -520,7 +520,7 @@ thermal-zones {
|
|||
polling-delay = <2500>; /* milliseconds */
|
||||
|
||||
/* sensor ID */
|
||||
thermal-sensors = <&adc-dummy 4>;
|
||||
thermal-sensors = <&adc_dummy 4>;
|
||||
|
||||
trips {
|
||||
...
|
||||
|
|
@ -531,14 +531,14 @@ thermal-zones {
|
|||
};
|
||||
};
|
||||
|
||||
board-thermal: board-thermal {
|
||||
board_thermal: board-thermal {
|
||||
polling-delay-passive = <1000>; /* milliseconds */
|
||||
polling-delay = <2500>; /* milliseconds */
|
||||
|
||||
/* sensor ID */
|
||||
thermal-sensors = <&adc-dummy 0>, /* pcb top edge */
|
||||
<&adc-dummy 1>, /* lcd */
|
||||
<&adc-dymmy 2>; /* back cover */
|
||||
thermal-sensors = <&adc_dummy 0>, /* pcb top edge */
|
||||
<&adc_dummy 1>, /* lcd */
|
||||
<&adc_dummy 2>; /* back cover */
|
||||
/*
|
||||
* An array of coefficients describing the sensor
|
||||
* linear relation. E.g.:
|
||||
|
|
@ -548,22 +548,22 @@ thermal-zones {
|
|||
|
||||
trips {
|
||||
/* Trips are based on resulting linear equation */
|
||||
cpu-trip: cpu-trip {
|
||||
cpu_trip: cpu-trip {
|
||||
temperature = <60000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
gpu-trip: gpu-trip {
|
||||
gpu_trip: gpu-trip {
|
||||
temperature = <55000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
}
|
||||
lcd-trip: lcp-trip {
|
||||
lcd_trip: lcp-trip {
|
||||
temperature = <53000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
crit-trip: crit-trip {
|
||||
crit_trip: crit-trip {
|
||||
temperature = <68000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "critical";
|
||||
|
|
@ -572,17 +572,17 @@ thermal-zones {
|
|||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu-trip>;
|
||||
trip = <&cpu_trip>;
|
||||
cooling-device = <&cpu0 0 2>;
|
||||
contribution = <55>;
|
||||
};
|
||||
map1 {
|
||||
trip = <&gpu-trip>;
|
||||
trip = <&gpu_trip>;
|
||||
cooling-device = <&gpu0 0 2>;
|
||||
contribution = <20>;
|
||||
};
|
||||
map2 {
|
||||
trip = <&lcd-trip>;
|
||||
trip = <&lcd_trip>;
|
||||
cooling-device = <&lcd0 5 10>;
|
||||
contribution = <15>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,6 +13,11 @@ Required Properties:
|
|||
by the GPIO flags.
|
||||
- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
|
||||
|
||||
Optional Properties:
|
||||
- always-running: If the watchdog timer cannot be disabled, add this flag to
|
||||
have the driver keep toggling the signal without a client. It will only cease
|
||||
to toggle the signal when the device is open and the timeout elapsed.
|
||||
|
||||
Example:
|
||||
watchdog: watchdog {
|
||||
/* ADM706 */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "img,pdc-wdt"
|
||||
- reg : Should contain WDT registers location and length
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
- clock-names: Should contain "wdt" and "sys"; the watchdog counter
|
||||
clock and register interface clock respectively.
|
||||
- interrupts : Should contain WDT interrupt
|
||||
|
||||
Examples:
|
||||
|
||||
watchdog@18102100 {
|
||||
compatible = "img,pdc-wdt";
|
||||
reg = <0x18102100 0x100>;
|
||||
clocks = <&pdc_wdt_clk>, <&sys_clk>;
|
||||
clock-names = "wdt", "sys";
|
||||
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
Ingenic Watchdog Timer (WDT) Controller for JZ4740
|
||||
|
||||
Required properties:
|
||||
compatible: "ingenic,jz4740-watchdog"
|
||||
reg: Register address and length for watchdog registers
|
||||
|
||||
Example:
|
||||
|
||||
watchdog: jz4740-watchdog@0x10002000 {
|
||||
compatible = "ingenic,jz4740-watchdog";
|
||||
reg = <0x10002000 0x100>;
|
||||
};
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
Mediatek SoCs Watchdog timer
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "mediatek,mt6589-wdt"
|
||||
- reg : Specifies base physical address and size of the registers.
|
||||
|
||||
Example:
|
||||
|
||||
wdt: watchdog@010000000 {
|
||||
compatible = "mediatek,mt6589-wdt";
|
||||
reg = <0x10000000 0x18>;
|
||||
};
|
||||
|
|
@ -113,6 +113,31 @@ need to initialize a few fields in there:
|
|||
* channels: should be initialized as a list using the
|
||||
INIT_LIST_HEAD macro for example
|
||||
|
||||
* src_addr_widths:
|
||||
- should contain a bitmask of the supported source transfer width
|
||||
|
||||
* dst_addr_widths:
|
||||
- should contain a bitmask of the supported destination transfer
|
||||
width
|
||||
|
||||
* directions:
|
||||
- should contain a bitmask of the supported slave directions
|
||||
(i.e. excluding mem2mem transfers)
|
||||
|
||||
* residue_granularity:
|
||||
- Granularity of the transfer residue reported to dma_set_residue.
|
||||
- This can be either:
|
||||
+ Descriptor
|
||||
-> Your device doesn't support any kind of residue
|
||||
reporting. The framework will only know that a particular
|
||||
transaction descriptor is done.
|
||||
+ Segment
|
||||
-> Your device is able to report which chunks have been
|
||||
transferred
|
||||
+ Burst
|
||||
-> Your device is able to report which burst have been
|
||||
transferred
|
||||
|
||||
* dev: should hold the pointer to the struct device associated
|
||||
to your current driver instance.
|
||||
|
||||
|
|
@ -274,48 +299,36 @@ supported.
|
|||
account the current period.
|
||||
- This function can be called in an interrupt context.
|
||||
|
||||
* device_control
|
||||
- Used by client drivers to control and configure the channel it
|
||||
has a handle on.
|
||||
- Called with a command and an argument
|
||||
+ The command is one of the values listed by the enum
|
||||
dma_ctrl_cmd. The valid commands are:
|
||||
+ DMA_PAUSE
|
||||
+ Pauses a transfer on the channel
|
||||
+ This command should operate synchronously on the channel,
|
||||
pausing right away the work of the given channel
|
||||
+ DMA_RESUME
|
||||
+ Restarts a transfer on the channel
|
||||
+ This command should operate synchronously on the channel,
|
||||
resuming right away the work of the given channel
|
||||
+ DMA_TERMINATE_ALL
|
||||
+ Aborts all the pending and ongoing transfers on the
|
||||
channel
|
||||
+ This command should operate synchronously on the channel,
|
||||
terminating right away all the channels
|
||||
+ DMA_SLAVE_CONFIG
|
||||
+ Reconfigures the channel with passed configuration
|
||||
+ This command should NOT perform synchronously, or on any
|
||||
currently queued transfers, but only on subsequent ones
|
||||
+ In this case, the function will receive a
|
||||
dma_slave_config structure pointer as an argument, that
|
||||
will detail which configuration to use.
|
||||
+ Even though that structure contains a direction field,
|
||||
this field is deprecated in favor of the direction
|
||||
argument given to the prep_* functions
|
||||
+ FSLDMA_EXTERNAL_START
|
||||
+ TODO: Why does that even exist?
|
||||
+ The argument is an opaque unsigned long. This actually is a
|
||||
pointer to a struct dma_slave_config that should be used only
|
||||
in the DMA_SLAVE_CONFIG.
|
||||
* device_config
|
||||
- Reconfigures the channel with the configuration given as
|
||||
argument
|
||||
- This command should NOT perform synchronously, or on any
|
||||
currently queued transfers, but only on subsequent ones
|
||||
- In this case, the function will receive a dma_slave_config
|
||||
structure pointer as an argument, that will detail which
|
||||
configuration to use.
|
||||
- Even though that structure contains a direction field, this
|
||||
field is deprecated in favor of the direction argument given to
|
||||
the prep_* functions
|
||||
- This call is mandatory for slave operations only. This should NOT be
|
||||
set or expected to be set for memcpy operations.
|
||||
If a driver support both, it should use this call for slave
|
||||
operations only and not for memcpy ones.
|
||||
|
||||
* device_slave_caps
|
||||
- Called through the framework by client drivers in order to have
|
||||
an idea of what are the properties of the channel allocated to
|
||||
them.
|
||||
- Such properties are the buswidth, available directions, etc.
|
||||
- Required for every generic layer doing DMA transfers, such as
|
||||
ASoC.
|
||||
* device_pause
|
||||
- Pauses a transfer on the channel
|
||||
- This command should operate synchronously on the channel,
|
||||
pausing right away the work of the given channel
|
||||
|
||||
* device_resume
|
||||
- Resumes a transfer on the channel
|
||||
- This command should operate synchronously on the channel,
|
||||
pausing right away the work of the given channel
|
||||
|
||||
* device_terminate_all
|
||||
- Aborts all the pending and ongoing transfers on the channel
|
||||
- This command should operate synchronously on the channel,
|
||||
terminating right away all the channels
|
||||
|
||||
Misc notes (stuff that should be documented, but don't really know
|
||||
where to put them)
|
||||
|
|
|
|||
|
|
@ -164,8 +164,6 @@ the block device inode. See there for more details.
|
|||
|
||||
--------------------------- file_system_type ---------------------------
|
||||
prototypes:
|
||||
int (*get_sb) (struct file_system_type *, int,
|
||||
const char *, void *, struct vfsmount *);
|
||||
struct dentry *(*mount) (struct file_system_type *, int,
|
||||
const char *, void *);
|
||||
void (*kill_sb) (struct super_block *);
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@ system.
|
|||
|
||||
dlmfs is built with OCFS2 as it requires most of its infrastructure.
|
||||
|
||||
Project web page: http://oss.oracle.com/projects/ocfs2
|
||||
Tools web page: http://oss.oracle.com/projects/ocfs2-tools
|
||||
Project web page: http://ocfs2.wiki.kernel.org
|
||||
Tools web page: https://github.com/markfasheh/ocfs2-tools
|
||||
OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
|
||||
|
||||
All code copyright 2005 Oracle except when otherwise noted.
|
||||
|
|
|
|||
|
|
@ -8,8 +8,8 @@ also make it attractive for non-clustered use.
|
|||
You'll want to install the ocfs2-tools package in order to at least
|
||||
get "mount.ocfs2" and "ocfs2_hb_ctl".
|
||||
|
||||
Project web page: http://oss.oracle.com/projects/ocfs2
|
||||
Tools web page: http://oss.oracle.com/projects/ocfs2-tools
|
||||
Project web page: http://ocfs2.wiki.kernel.org
|
||||
Tools git tree: https://github.com/markfasheh/ocfs2-tools
|
||||
OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
|
||||
|
||||
All code copyright 2005 Oracle except when otherwise noted.
|
||||
|
|
|
|||
|
|
@ -159,6 +159,22 @@ overlay filesystem (though an operation on the name of the file such as
|
|||
rename or unlink will of course be noticed and handled).
|
||||
|
||||
|
||||
Multiple lower layers
|
||||
---------------------
|
||||
|
||||
Multiple lower layers can now be given using the the colon (":") as a
|
||||
separator character between the directory names. For example:
|
||||
|
||||
mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged
|
||||
|
||||
As the example shows, "upperdir=" and "workdir=" may be omitted. In
|
||||
that case the overlay will be read-only.
|
||||
|
||||
The specified lower directories will be stacked beginning from the
|
||||
rightmost one and going left. In the above example lower1 will be the
|
||||
top, lower2 the middle and lower3 the bottom layer.
|
||||
|
||||
|
||||
Non-standard behavior
|
||||
---------------------
|
||||
|
||||
|
|
@ -196,3 +212,15 @@ Changes to the underlying filesystems while part of a mounted overlay
|
|||
filesystem are not allowed. If the underlying filesystem is changed,
|
||||
the behavior of the overlay is undefined, though it will not result in
|
||||
a crash or deadlock.
|
||||
|
||||
Testsuite
|
||||
---------
|
||||
|
||||
There's testsuite developed by David Howells at:
|
||||
|
||||
git://git.infradead.org/users/dhowells/unionmount-testsuite.git
|
||||
|
||||
Run as root:
|
||||
|
||||
# cd unionmount-testsuite
|
||||
# ./run --ov
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ FUNCTIONALITY CONSTANTS
|
|||
-----------------------
|
||||
|
||||
For the most up-to-date list of functionality constants, please check
|
||||
<linux/i2c.h>!
|
||||
<uapi/linux/i2c.h>!
|
||||
|
||||
I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus
|
||||
adapters typically can not do these)
|
||||
|
|
|
|||
|
|
@ -1,137 +0,0 @@
|
|||
Paravirt_ops on IA64
|
||||
====================
|
||||
21 May 2008, Isaku Yamahata <yamahata@valinux.co.jp>
|
||||
|
||||
|
||||
Introduction
|
||||
------------
|
||||
The aim of this documentation is to help with maintainability and/or to
|
||||
encourage people to use paravirt_ops/IA64.
|
||||
|
||||
paravirt_ops (pv_ops in short) is a way for virtualization support of
|
||||
Linux kernel on x86. Several ways for virtualization support were
|
||||
proposed, paravirt_ops is the winner.
|
||||
On the other hand, now there are also several IA64 virtualization
|
||||
technologies like kvm/IA64, xen/IA64 and many other academic IA64
|
||||
hypervisors so that it is good to add generic virtualization
|
||||
infrastructure on Linux/IA64.
|
||||
|
||||
|
||||
What is paravirt_ops?
|
||||
---------------------
|
||||
It has been developed on x86 as virtualization support via API, not ABI.
|
||||
It allows each hypervisor to override operations which are important for
|
||||
hypervisors at API level. And it allows a single kernel binary to run on
|
||||
all supported execution environments including native machine.
|
||||
Essentially paravirt_ops is a set of function pointers which represent
|
||||
operations corresponding to low level sensitive instructions and high
|
||||
level functionalities in various area. But one significant difference
|
||||
from usual function pointer table is that it allows optimization with
|
||||
binary patch. It is because some of these operations are very
|
||||
performance sensitive and indirect call overhead is not negligible.
|
||||
With binary patch, indirect C function call can be transformed into
|
||||
direct C function call or in-place execution to eliminate the overhead.
|
||||
|
||||
Thus, operations of paravirt_ops are classified into three categories.
|
||||
- simple indirect call
|
||||
These operations correspond to high level functionality so that the
|
||||
overhead of indirect call isn't very important.
|
||||
|
||||
- indirect call which allows optimization with binary patch
|
||||
Usually these operations correspond to low level instructions. They
|
||||
are called frequently and performance critical. So the overhead is
|
||||
very important.
|
||||
|
||||
- a set of macros for hand written assembly code
|
||||
Hand written assembly codes (.S files) also need paravirtualization
|
||||
because they include sensitive instructions or some of code paths in
|
||||
them are very performance critical.
|
||||
|
||||
|
||||
The relation to the IA64 machine vector
|
||||
---------------------------------------
|
||||
Linux/IA64 has the IA64 machine vector functionality which allows the
|
||||
kernel to switch implementations (e.g. initialization, ipi, dma api...)
|
||||
depending on executing platform.
|
||||
We can replace some implementations very easily defining a new machine
|
||||
vector. Thus another approach for virtualization support would be
|
||||
enhancing the machine vector functionality.
|
||||
But paravirt_ops approach was taken because
|
||||
- virtualization support needs wider support than machine vector does.
|
||||
e.g. low level instruction paravirtualization. It must be
|
||||
initialized very early before platform detection.
|
||||
|
||||
- virtualization support needs more functionality like binary patch.
|
||||
Probably the calling overhead might not be very large compared to the
|
||||
emulation overhead of virtualization. However in the native case, the
|
||||
overhead should be eliminated completely.
|
||||
A single kernel binary should run on each environment including native,
|
||||
and the overhead of paravirt_ops on native environment should be as
|
||||
small as possible.
|
||||
|
||||
- for full virtualization technology, e.g. KVM/IA64 or
|
||||
Xen/IA64 HVM domain, the result would be
|
||||
(the emulated platform machine vector. probably dig) + (pv_ops).
|
||||
This means that the virtualization support layer should be under
|
||||
the machine vector layer.
|
||||
|
||||
Possibly it might be better to move some function pointers from
|
||||
paravirt_ops to machine vector. In fact, Xen domU case utilizes both
|
||||
pv_ops and machine vector.
|
||||
|
||||
|
||||
IA64 paravirt_ops
|
||||
-----------------
|
||||
In this section, the concrete paravirt_ops will be discussed.
|
||||
Because of the architecture difference between ia64 and x86, the
|
||||
resulting set of functions is very different from x86 pv_ops.
|
||||
|
||||
- C function pointer tables
|
||||
They are not very performance critical so that simple C indirect
|
||||
function call is acceptable. The following structures are defined at
|
||||
this moment. For details see linux/include/asm-ia64/paravirt.h
|
||||
- struct pv_info
|
||||
This structure describes the execution environment.
|
||||
- struct pv_init_ops
|
||||
This structure describes the various initialization hooks.
|
||||
- struct pv_iosapic_ops
|
||||
This structure describes hooks to iosapic operations.
|
||||
- struct pv_irq_ops
|
||||
This structure describes hooks to irq related operations
|
||||
- struct pv_time_op
|
||||
This structure describes hooks to steal time accounting.
|
||||
|
||||
- a set of indirect calls which need optimization
|
||||
Currently this class of functions correspond to a subset of IA64
|
||||
intrinsics. At this moment the optimization with binary patch isn't
|
||||
implemented yet.
|
||||
struct pv_cpu_op is defined. For details see
|
||||
linux/include/asm-ia64/paravirt_privop.h
|
||||
Mostly they correspond to ia64 intrinsics 1-to-1.
|
||||
Caveat: Now they are defined as C indirect function pointers, but in
|
||||
order to support binary patch optimization, they will be changed
|
||||
using GCC extended inline assembly code.
|
||||
|
||||
- a set of macros for hand written assembly code (.S files)
|
||||
For maintenance purpose, the taken approach for .S files is single
|
||||
source code and compile multiple times with different macros definitions.
|
||||
Each pv_ops instance must define those macros to compile.
|
||||
The important thing here is that sensitive, but non-privileged
|
||||
instructions must be paravirtualized and that some privileged
|
||||
instructions also need paravirtualization for reasonable performance.
|
||||
Developers who modify .S files must be aware of that. At this moment
|
||||
an easy checker is implemented to detect paravirtualization breakage.
|
||||
But it doesn't cover all the cases.
|
||||
|
||||
Sometimes this set of macros is called pv_cpu_asm_op. But there is no
|
||||
corresponding structure in the source code.
|
||||
Those macros mostly 1:1 correspond to a subset of privileged
|
||||
instructions. See linux/include/asm-ia64/native/inst.h.
|
||||
And some functions written in assembly also need to be overrided so
|
||||
that each pv_ops instance have to define some macros. Again see
|
||||
linux/include/asm-ia64/native/inst.h.
|
||||
|
||||
|
||||
Those structures must be initialized very early before start_kernel.
|
||||
Probably initialized in head.S using multi entry point or some other trick.
|
||||
For native case implementation see linux/arch/ia64/kernel/paravirt.c.
|
||||
|
|
@ -3,8 +3,8 @@ ALPS Touchpad Protocol
|
|||
|
||||
Introduction
|
||||
------------
|
||||
Currently the ALPS touchpad driver supports five protocol versions in use by
|
||||
ALPS touchpads, called versions 1, 2, 3, 4 and 5.
|
||||
Currently the ALPS touchpad driver supports seven protocol versions in use by
|
||||
ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7.
|
||||
|
||||
Since roughly mid-2010 several new ALPS touchpads have been released and
|
||||
integrated into a variety of laptops and netbooks. These new touchpads
|
||||
|
|
@ -240,3 +240,67 @@ For mt, the format is:
|
|||
byte 3: 0 x23 x22 x21 x20 x19 x18 x17
|
||||
byte 4: 0 x9 x8 x7 x6 x5 x4 x3
|
||||
byte 5: 0 x16 x15 x14 x13 x12 x11 x10
|
||||
|
||||
ALPS Absolute Mode - Protocol Version 6
|
||||
---------------------------------------
|
||||
|
||||
For trackstick packet, the format is:
|
||||
|
||||
byte 0: 1 1 1 1 1 1 1 1
|
||||
byte 1: 0 X6 X5 X4 X3 X2 X1 X0
|
||||
byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
||||
byte 3: ? Y7 X7 ? ? M R L
|
||||
byte 4: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
|
||||
byte 5: 0 1 1 1 1 1 1 1
|
||||
|
||||
For touchpad packet, the format is:
|
||||
|
||||
byte 0: 1 1 1 1 1 1 1 1
|
||||
byte 1: 0 0 0 0 x3 x2 x1 x0
|
||||
byte 2: 0 0 0 0 y3 y2 y1 y0
|
||||
byte 3: ? x7 x6 x5 x4 ? r l
|
||||
byte 4: ? y7 y6 y5 y4 ? ? ?
|
||||
byte 5: z7 z6 z5 z4 z3 z2 z1 z0
|
||||
|
||||
(v6 touchpad does not have middle button)
|
||||
|
||||
ALPS Absolute Mode - Protocol Version 7
|
||||
---------------------------------------
|
||||
|
||||
For trackstick packet, the format is:
|
||||
|
||||
byte 0: 0 1 0 0 1 0 0 0
|
||||
byte 1: 1 1 * * 1 M R L
|
||||
byte 2: X7 1 X5 X4 X3 X2 X1 X0
|
||||
byte 3: Z6 1 Y6 X6 1 Y2 Y1 Y0
|
||||
byte 4: Y7 0 Y5 Y4 Y3 1 1 0
|
||||
byte 5: T&P 0 Z5 Z4 Z3 Z2 Z1 Z0
|
||||
|
||||
For touchpad packet, the format is:
|
||||
|
||||
packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
|
||||
byte 0: TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
|
||||
byte 0: NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
|
||||
byte 1: Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
|
||||
byte 2: X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
|
||||
byte 3: X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
|
||||
byte 4: TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
|
||||
byte 4: MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
|
||||
byte 4: NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
|
||||
byte 5: TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
|
||||
byte 5: MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
|
||||
|
||||
L: Left button
|
||||
R / M: Non-clickpads: Right / Middle button
|
||||
Clickpads: When > 2 fingers are down, and some fingers
|
||||
are in the button area, then the 2 coordinates reported
|
||||
are for fingers outside the button area and these report
|
||||
extra fingers being present in the right / left button
|
||||
area. Note these fingers are not added to the F field!
|
||||
so if a TWO packet is received and R = 1 then there are
|
||||
3 fingers down, etc.
|
||||
TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
|
||||
0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
|
||||
otherwise byte 0 bit 4 must be set and byte 0/4/5 are
|
||||
in NEW fmt
|
||||
F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
|
||||
|
|
|
|||
|
|
@ -524,15 +524,16 @@ more details, with real examples.
|
|||
Example:
|
||||
#arch/x86/Makefile
|
||||
cflags-y += $(shell \
|
||||
if [ $(call cc-version) -ge 0300 ] ; then \
|
||||
if [ $(cc-version) -ge 0300 ] ; then \
|
||||
echo "-mregparm=3"; fi ;)
|
||||
|
||||
In the above example, -mregparm=3 is only used for gcc version greater
|
||||
than or equal to gcc 3.0.
|
||||
|
||||
cc-ifversion
|
||||
cc-ifversion tests the version of $(CC) and equals last argument if
|
||||
version expression is true.
|
||||
cc-ifversion tests the version of $(CC) and equals the fourth parameter
|
||||
if version expression is true, or the fifth (if given) if the version
|
||||
expression is false.
|
||||
|
||||
Example:
|
||||
#fs/reiserfs/Makefile
|
||||
|
|
@ -552,7 +553,7 @@ more details, with real examples.
|
|||
|
||||
Example:
|
||||
#arch/powerpc/Makefile
|
||||
$(Q)if test "$(call cc-fullversion)" = "040200" ; then \
|
||||
$(Q)if test "$(cc-fullversion)" = "040200" ; then \
|
||||
echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \
|
||||
false ; \
|
||||
fi
|
||||
|
|
@ -751,12 +752,12 @@ generated by kbuild are deleted all over the kernel src tree when
|
|||
Additional files can be specified in kbuild makefiles by use of $(clean-files).
|
||||
|
||||
Example:
|
||||
#drivers/pci/Makefile
|
||||
clean-files := devlist.h classlist.h
|
||||
#lib/Makefile
|
||||
clean-files := crc32table.h
|
||||
|
||||
When executing "make clean", the two files "devlist.h classlist.h" will be
|
||||
deleted. Kbuild will assume files to be in the same relative directory as the
|
||||
Makefile except if an absolute path is specified (path starting with '/').
|
||||
Makefile, except if prefixed with $(objtree).
|
||||
|
||||
To delete a directory hierarchy use:
|
||||
|
||||
|
|
@ -764,9 +765,8 @@ To delete a directory hierarchy use:
|
|||
#scripts/package/Makefile
|
||||
clean-dirs := $(objtree)/debian/
|
||||
|
||||
This will delete the directory debian, including all subdirectories.
|
||||
Kbuild will assume the directories to be in the same relative path as the
|
||||
Makefile if no absolute path is specified (path does not start with '/').
|
||||
This will delete the directory debian in the toplevel directory, including all
|
||||
subdirectories.
|
||||
|
||||
To exclude certain files from make clean, use the $(no-clean-files) variable.
|
||||
This is only a special case used in the top level Kbuild file:
|
||||
|
|
|
|||
|
|
@ -2,6 +2,9 @@ Virtualization support in the Linux kernel.
|
|||
|
||||
00-INDEX
|
||||
- this file.
|
||||
|
||||
paravirt_ops.txt
|
||||
- Describes the Linux kernel pv_ops to support different hypervisors
|
||||
kvm/
|
||||
- Kernel Virtual Machine. See also http://linux-kvm.org
|
||||
uml/
|
||||
|
|
|
|||
|
|
@ -0,0 +1,32 @@
|
|||
Paravirt_ops
|
||||
============
|
||||
|
||||
Linux provides support for different hypervisor virtualization technologies.
|
||||
Historically different binary kernels would be required in order to support
|
||||
different hypervisors, this restriction was removed with pv_ops.
|
||||
Linux pv_ops is a virtualization API which enables support for different
|
||||
hypervisors. It allows each hypervisor to override critical operations and
|
||||
allows a single kernel binary to run on all supported execution environments
|
||||
including native machine -- without any hypervisors.
|
||||
|
||||
pv_ops provides a set of function pointers which represent operations
|
||||
corresponding to low level critical instructions and high level
|
||||
functionalities in various areas. pv-ops allows for optimizations at run
|
||||
time by enabling binary patching of the low-ops critical operations
|
||||
at boot time.
|
||||
|
||||
pv_ops operations are classified into three categories:
|
||||
|
||||
- simple indirect call
|
||||
These operations correspond to high level functionality where it is
|
||||
known that the overhead of indirect call isn't very important.
|
||||
|
||||
- indirect call which allows optimization with binary patch
|
||||
Usually these operations correspond to low level critical instructions. They
|
||||
are called frequently and are performance critical. The overhead is
|
||||
very important.
|
||||
|
||||
- a set of macros for hand written assembly code
|
||||
Hand written assembly codes (.S files) also need paravirtualization
|
||||
because they include sensitive instructions or some of code paths in
|
||||
them are very performance critical.
|
||||
|
|
@ -3,7 +3,7 @@ protocol of kernel. These should be filled by bootloader or 16-bit
|
|||
real-mode setup code of the kernel. References/settings to it mainly
|
||||
are in:
|
||||
|
||||
arch/x86/include/asm/bootparam.h
|
||||
arch/x86/include/uapi/asm/bootparam.h
|
||||
|
||||
|
||||
Offset Proto Name Meaning
|
||||
|
|
|
|||
79
Kbuild
79
Kbuild
|
|
@ -5,51 +5,6 @@
|
|||
# 2) Generate asm-offsets.h (may need bounds.h)
|
||||
# 3) Check for missing system calls
|
||||
|
||||
#####
|
||||
# 1) Generate bounds.h
|
||||
|
||||
bounds-file := include/generated/bounds.h
|
||||
|
||||
always := $(bounds-file)
|
||||
targets := $(bounds-file) kernel/bounds.s
|
||||
|
||||
quiet_cmd_bounds = GEN $@
|
||||
define cmd_bounds
|
||||
(set -e; \
|
||||
echo "#ifndef __LINUX_BOUNDS_H__"; \
|
||||
echo "#define __LINUX_BOUNDS_H__"; \
|
||||
echo "/*"; \
|
||||
echo " * DO NOT MODIFY."; \
|
||||
echo " *"; \
|
||||
echo " * This file was generated by Kbuild"; \
|
||||
echo " *"; \
|
||||
echo " */"; \
|
||||
echo ""; \
|
||||
sed -ne $(sed-y) $<; \
|
||||
echo ""; \
|
||||
echo "#endif" ) > $@
|
||||
endef
|
||||
|
||||
# We use internal kbuild rules to avoid the "is up to date" message from make
|
||||
kernel/bounds.s: kernel/bounds.c FORCE
|
||||
$(Q)mkdir -p $(dir $@)
|
||||
$(call if_changed_dep,cc_s_c)
|
||||
|
||||
$(obj)/$(bounds-file): kernel/bounds.s Kbuild
|
||||
$(Q)mkdir -p $(dir $@)
|
||||
$(call cmd,bounds)
|
||||
|
||||
#####
|
||||
# 2) Generate asm-offsets.h
|
||||
#
|
||||
|
||||
offsets-file := include/generated/asm-offsets.h
|
||||
|
||||
always += $(offsets-file)
|
||||
targets += $(offsets-file)
|
||||
targets += arch/$(SRCARCH)/kernel/asm-offsets.s
|
||||
|
||||
|
||||
# Default sed regexp - multiline due to syntax constraints
|
||||
define sed-y
|
||||
"/^->/{s:->#\(.*\):/* \1 */:; \
|
||||
|
|
@ -61,13 +16,12 @@ endef
|
|||
quiet_cmd_offsets = GEN $@
|
||||
define cmd_offsets
|
||||
(set -e; \
|
||||
echo "#ifndef __ASM_OFFSETS_H__"; \
|
||||
echo "#define __ASM_OFFSETS_H__"; \
|
||||
echo "#ifndef $2"; \
|
||||
echo "#define $2"; \
|
||||
echo "/*"; \
|
||||
echo " * DO NOT MODIFY."; \
|
||||
echo " *"; \
|
||||
echo " * This file was generated by Kbuild"; \
|
||||
echo " *"; \
|
||||
echo " */"; \
|
||||
echo ""; \
|
||||
sed -ne $(sed-y) $<; \
|
||||
|
|
@ -75,6 +29,33 @@ define cmd_offsets
|
|||
echo "#endif" ) > $@
|
||||
endef
|
||||
|
||||
#####
|
||||
# 1) Generate bounds.h
|
||||
|
||||
bounds-file := include/generated/bounds.h
|
||||
|
||||
always := $(bounds-file)
|
||||
targets := $(bounds-file) kernel/bounds.s
|
||||
|
||||
# We use internal kbuild rules to avoid the "is up to date" message from make
|
||||
kernel/bounds.s: kernel/bounds.c FORCE
|
||||
$(Q)mkdir -p $(dir $@)
|
||||
$(call if_changed_dep,cc_s_c)
|
||||
|
||||
$(obj)/$(bounds-file): kernel/bounds.s Kbuild
|
||||
$(Q)mkdir -p $(dir $@)
|
||||
$(call cmd,offsets,__LINUX_BOUNDS_H__)
|
||||
|
||||
#####
|
||||
# 2) Generate asm-offsets.h
|
||||
#
|
||||
|
||||
offsets-file := include/generated/asm-offsets.h
|
||||
|
||||
always += $(offsets-file)
|
||||
targets += $(offsets-file)
|
||||
targets += arch/$(SRCARCH)/kernel/asm-offsets.s
|
||||
|
||||
# We use internal kbuild rules to avoid the "is up to date" message from make
|
||||
arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
|
||||
$(obj)/$(bounds-file) FORCE
|
||||
|
|
@ -82,7 +63,7 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
|
|||
$(call if_changed_dep,cc_s_c)
|
||||
|
||||
$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
|
||||
$(call cmd,offsets)
|
||||
$(call cmd,offsets,__ASM_OFFSETS_H__)
|
||||
|
||||
#####
|
||||
# 3) Check for missing system calls
|
||||
|
|
|
|||
30
MAINTAINERS
30
MAINTAINERS
|
|
@ -2065,7 +2065,7 @@ F: include/net/bluetooth/
|
|||
BONDING DRIVER
|
||||
M: Jay Vosburgh <j.vosburgh@gmail.com>
|
||||
M: Veaceslav Falico <vfalico@gmail.com>
|
||||
M: Andy Gospodarek <andy@greyhouse.net>
|
||||
M: Andy Gospodarek <gospo@cumulusnetworks.com>
|
||||
L: netdev@vger.kernel.org
|
||||
W: http://sourceforge.net/projects/bonding/
|
||||
S: Supported
|
||||
|
|
@ -2433,7 +2433,8 @@ F: arch/powerpc/oprofile/*cell*
|
|||
F: arch/powerpc/platforms/cell/
|
||||
|
||||
CEPH DISTRIBUTED FILE SYSTEM CLIENT
|
||||
M: Sage Weil <sage@inktank.com>
|
||||
M: Yan, Zheng <zyan@redhat.com>
|
||||
M: Sage Weil <sage@redhat.com>
|
||||
L: ceph-devel@vger.kernel.org
|
||||
W: http://ceph.com/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
|
||||
|
|
@ -3936,7 +3937,7 @@ S: Maintained
|
|||
F: drivers/staging/fbtft/
|
||||
|
||||
FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
|
||||
M: Robert Love <robert.w.love@intel.com>
|
||||
M: Vasu Dev <vasu.dev@intel.com>
|
||||
L: fcoe-devel@open-fcoe.org
|
||||
W: www.Open-FCoE.org
|
||||
S: Supported
|
||||
|
|
@ -4092,6 +4093,12 @@ S: Maintained
|
|||
F: include/linux/platform_data/video-imxfb.h
|
||||
F: drivers/video/fbdev/imxfb.c
|
||||
|
||||
FREESCALE QUAD SPI DRIVER
|
||||
M: Han Xu <han.xu@freescale.com>
|
||||
L: linux-mtd@lists.infradead.org
|
||||
S: Maintained
|
||||
F: drivers/mtd/spi-nor/fsl-quadspi.c
|
||||
|
||||
FREESCALE SOC FS_ENET DRIVER
|
||||
M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
|
||||
M: Vitaly Bordug <vbordug@ru.mvista.com>
|
||||
|
|
@ -7206,8 +7213,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
|
|||
M: Mark Fasheh <mfasheh@suse.com>
|
||||
M: Joel Becker <jlbec@evilplan.org>
|
||||
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
|
||||
W: http://oss.oracle.com/projects/ocfs2/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
|
||||
W: http://ocfs2.wiki.kernel.org
|
||||
S: Supported
|
||||
F: Documentation/filesystems/ocfs2.txt
|
||||
F: Documentation/filesystems/dlmfs.txt
|
||||
|
|
@ -7296,7 +7302,7 @@ M: Alok Kataria <akataria@vmware.com>
|
|||
M: Rusty Russell <rusty@rustcorp.com.au>
|
||||
L: virtualization@lists.linux-foundation.org
|
||||
S: Supported
|
||||
F: Documentation/ia64/paravirt_ops.txt
|
||||
F: Documentation/virtual/paravirt_ops.txt
|
||||
F: arch/*/kernel/paravirt*
|
||||
F: arch/*/include/asm/paravirt.h
|
||||
|
||||
|
|
@ -7992,8 +7998,8 @@ S: Supported
|
|||
F: drivers/net/wireless/ath/wcn36xx/
|
||||
|
||||
RADOS BLOCK DEVICE (RBD)
|
||||
M: Yehuda Sadeh <yehuda@inktank.com>
|
||||
M: Sage Weil <sage@inktank.com>
|
||||
M: Ilya Dryomov <idryomov@gmail.com>
|
||||
M: Sage Weil <sage@redhat.com>
|
||||
M: Alex Elder <elder@kernel.org>
|
||||
M: ceph-devel@vger.kernel.org
|
||||
W: http://ceph.com/
|
||||
|
|
@ -8496,6 +8502,7 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
|
|||
M: Viresh Kumar <viresh.linux@gmail.com>
|
||||
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
||||
S: Maintained
|
||||
F: include/linux/dma/dw.h
|
||||
F: include/linux/platform_data/dma-dw.h
|
||||
F: drivers/dma/dw/
|
||||
|
||||
|
|
@ -8558,7 +8565,7 @@ S: Maintained
|
|||
F: drivers/scsi/sr*
|
||||
|
||||
SCSI RDMA PROTOCOL (SRP) INITIATOR
|
||||
M: Bart Van Assche <bvanassche@acm.org>
|
||||
M: Bart Van Assche <bart.vanassche@sandisk.com>
|
||||
L: linux-rdma@vger.kernel.org
|
||||
S: Supported
|
||||
W: http://www.openfabrics.org
|
||||
|
|
@ -9710,6 +9717,11 @@ L: linux-omap@vger.kernel.org
|
|||
S: Maintained
|
||||
F: drivers/thermal/ti-soc-thermal/
|
||||
|
||||
TI CDCE706 CLOCK DRIVER
|
||||
M: Max Filippov <jcmvbkbc@gmail.com>
|
||||
S: Maintained
|
||||
F: drivers/clk/clk-cdce706.c
|
||||
|
||||
TI CLOCK DRIVER
|
||||
M: Tero Kristo <t-kristo@ti.com>
|
||||
L: linux-omap@vger.kernel.org
|
||||
|
|
|
|||
12
Makefile
12
Makefile
|
|
@ -1,8 +1,8 @@
|
|||
VERSION = 3
|
||||
PATCHLEVEL = 19
|
||||
VERSION = 4
|
||||
PATCHLEVEL = 0
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION =
|
||||
NAME = Diseased Newt
|
||||
EXTRAVERSION = -rc2
|
||||
NAME = Hurr durr I'ma sheep
|
||||
|
||||
# *DOCUMENTATION*
|
||||
# To see a list of typical targets execute "make help"
|
||||
|
|
@ -502,7 +502,7 @@ endif
|
|||
ifeq ($(KBUILD_EXTMOD),)
|
||||
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
|
||||
config-targets := 1
|
||||
ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
|
||||
ifneq ($(words $(MAKECMDGOALS)),1)
|
||||
mixed-targets := 1
|
||||
endif
|
||||
endif
|
||||
|
|
@ -1180,7 +1180,7 @@ CLEAN_DIRS += $(MODVERDIR)
|
|||
# Directories & files removed with 'make mrproper'
|
||||
MRPROPER_DIRS += include/config usr/include include/generated \
|
||||
arch/*/include/generated .tmp_objdiff
|
||||
MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
|
||||
MRPROPER_FILES += .config .config.old .version .old_version \
|
||||
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
|
||||
signing_key.priv signing_key.x509 x509.genkey \
|
||||
extra_certificates signing_key.x509.keyid \
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@
|
|||
#define get_ds() (KERNEL_DS)
|
||||
#define set_fs(x) (current_thread_info()->addr_limit = (x))
|
||||
|
||||
#define segment_eq(a,b) ((a).seg == (b).seg)
|
||||
#define segment_eq(a, b) ((a).seg == (b).seg)
|
||||
|
||||
/*
|
||||
* Is a address valid? This does a straightforward calculation rather
|
||||
|
|
@ -39,13 +39,13 @@
|
|||
* - AND "addr+size" doesn't have any high-bits set
|
||||
* - OR we are in kernel mode.
|
||||
*/
|
||||
#define __access_ok(addr,size,segment) \
|
||||
#define __access_ok(addr, size, segment) \
|
||||
(((segment).seg & (addr | size | (addr+size))) == 0)
|
||||
|
||||
#define access_ok(type,addr,size) \
|
||||
#define access_ok(type, addr, size) \
|
||||
({ \
|
||||
__chk_user_ptr(addr); \
|
||||
__access_ok(((unsigned long)(addr)),(size),get_fs()); \
|
||||
__access_ok(((unsigned long)(addr)), (size), get_fs()); \
|
||||
})
|
||||
|
||||
/*
|
||||
|
|
@ -60,20 +60,20 @@
|
|||
* (a) re-use the arguments for side effects (sizeof/typeof is ok)
|
||||
* (b) require any knowledge of processes at this stage
|
||||
*/
|
||||
#define put_user(x,ptr) \
|
||||
__put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)),get_fs())
|
||||
#define get_user(x,ptr) \
|
||||
__get_user_check((x),(ptr),sizeof(*(ptr)),get_fs())
|
||||
#define put_user(x, ptr) \
|
||||
__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), get_fs())
|
||||
#define get_user(x, ptr) \
|
||||
__get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
|
||||
|
||||
/*
|
||||
* The "__xxx" versions do not do address space checking, useful when
|
||||
* doing multiple accesses to the same area (the programmer has to do the
|
||||
* checks by hand with "access_ok()")
|
||||
*/
|
||||
#define __put_user(x,ptr) \
|
||||
__put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
|
||||
#define __get_user(x,ptr) \
|
||||
__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
|
||||
#define __put_user(x, ptr) \
|
||||
__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
|
||||
#define __get_user(x, ptr) \
|
||||
__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
|
||||
|
||||
/*
|
||||
* The "lda %1, 2b-1b(%0)" bits are magic to get the assembler to
|
||||
|
|
@ -84,7 +84,7 @@
|
|||
|
||||
extern void __get_user_unknown(void);
|
||||
|
||||
#define __get_user_nocheck(x,ptr,size) \
|
||||
#define __get_user_nocheck(x, ptr, size) \
|
||||
({ \
|
||||
long __gu_err = 0; \
|
||||
unsigned long __gu_val; \
|
||||
|
|
@ -96,16 +96,16 @@ extern void __get_user_unknown(void);
|
|||
case 8: __get_user_64(ptr); break; \
|
||||
default: __get_user_unknown(); break; \
|
||||
} \
|
||||
(x) = (__typeof__(*(ptr))) __gu_val; \
|
||||
(x) = (__force __typeof__(*(ptr))) __gu_val; \
|
||||
__gu_err; \
|
||||
})
|
||||
|
||||
#define __get_user_check(x,ptr,size,segment) \
|
||||
#define __get_user_check(x, ptr, size, segment) \
|
||||
({ \
|
||||
long __gu_err = -EFAULT; \
|
||||
unsigned long __gu_val = 0; \
|
||||
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
|
||||
if (__access_ok((unsigned long)__gu_addr,size,segment)) { \
|
||||
if (__access_ok((unsigned long)__gu_addr, size, segment)) { \
|
||||
__gu_err = 0; \
|
||||
switch (size) { \
|
||||
case 1: __get_user_8(__gu_addr); break; \
|
||||
|
|
@ -115,7 +115,7 @@ extern void __get_user_unknown(void);
|
|||
default: __get_user_unknown(); break; \
|
||||
} \
|
||||
} \
|
||||
(x) = (__typeof__(*(ptr))) __gu_val; \
|
||||
(x) = (__force __typeof__(*(ptr))) __gu_val; \
|
||||
__gu_err; \
|
||||
})
|
||||
|
||||
|
|
@ -201,31 +201,31 @@ struct __large_struct { unsigned long buf[100]; };
|
|||
|
||||
extern void __put_user_unknown(void);
|
||||
|
||||
#define __put_user_nocheck(x,ptr,size) \
|
||||
#define __put_user_nocheck(x, ptr, size) \
|
||||
({ \
|
||||
long __pu_err = 0; \
|
||||
__chk_user_ptr(ptr); \
|
||||
switch (size) { \
|
||||
case 1: __put_user_8(x,ptr); break; \
|
||||
case 2: __put_user_16(x,ptr); break; \
|
||||
case 4: __put_user_32(x,ptr); break; \
|
||||
case 8: __put_user_64(x,ptr); break; \
|
||||
case 1: __put_user_8(x, ptr); break; \
|
||||
case 2: __put_user_16(x, ptr); break; \
|
||||
case 4: __put_user_32(x, ptr); break; \
|
||||
case 8: __put_user_64(x, ptr); break; \
|
||||
default: __put_user_unknown(); break; \
|
||||
} \
|
||||
__pu_err; \
|
||||
})
|
||||
|
||||
#define __put_user_check(x,ptr,size,segment) \
|
||||
#define __put_user_check(x, ptr, size, segment) \
|
||||
({ \
|
||||
long __pu_err = -EFAULT; \
|
||||
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
|
||||
if (__access_ok((unsigned long)__pu_addr,size,segment)) { \
|
||||
if (__access_ok((unsigned long)__pu_addr, size, segment)) { \
|
||||
__pu_err = 0; \
|
||||
switch (size) { \
|
||||
case 1: __put_user_8(x,__pu_addr); break; \
|
||||
case 2: __put_user_16(x,__pu_addr); break; \
|
||||
case 4: __put_user_32(x,__pu_addr); break; \
|
||||
case 8: __put_user_64(x,__pu_addr); break; \
|
||||
case 1: __put_user_8(x, __pu_addr); break; \
|
||||
case 2: __put_user_16(x, __pu_addr); break; \
|
||||
case 4: __put_user_32(x, __pu_addr); break; \
|
||||
case 8: __put_user_64(x, __pu_addr); break; \
|
||||
default: __put_user_unknown(); break; \
|
||||
} \
|
||||
} \
|
||||
|
|
@ -237,7 +237,7 @@ extern void __put_user_unknown(void);
|
|||
* instead of writing: this is because they do not write to
|
||||
* any memory gcc knows about, so there are no aliasing issues
|
||||
*/
|
||||
#define __put_user_64(x,addr) \
|
||||
#define __put_user_64(x, addr) \
|
||||
__asm__ __volatile__("1: stq %r2,%1\n" \
|
||||
"2:\n" \
|
||||
".section __ex_table,\"a\"\n" \
|
||||
|
|
@ -247,7 +247,7 @@ __asm__ __volatile__("1: stq %r2,%1\n" \
|
|||
: "=r"(__pu_err) \
|
||||
: "m" (__m(addr)), "rJ" (x), "0"(__pu_err))
|
||||
|
||||
#define __put_user_32(x,addr) \
|
||||
#define __put_user_32(x, addr) \
|
||||
__asm__ __volatile__("1: stl %r2,%1\n" \
|
||||
"2:\n" \
|
||||
".section __ex_table,\"a\"\n" \
|
||||
|
|
@ -260,7 +260,7 @@ __asm__ __volatile__("1: stl %r2,%1\n" \
|
|||
#ifdef __alpha_bwx__
|
||||
/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */
|
||||
|
||||
#define __put_user_16(x,addr) \
|
||||
#define __put_user_16(x, addr) \
|
||||
__asm__ __volatile__("1: stw %r2,%1\n" \
|
||||
"2:\n" \
|
||||
".section __ex_table,\"a\"\n" \
|
||||
|
|
@ -270,7 +270,7 @@ __asm__ __volatile__("1: stw %r2,%1\n" \
|
|||
: "=r"(__pu_err) \
|
||||
: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
|
||||
|
||||
#define __put_user_8(x,addr) \
|
||||
#define __put_user_8(x, addr) \
|
||||
__asm__ __volatile__("1: stb %r2,%1\n" \
|
||||
"2:\n" \
|
||||
".section __ex_table,\"a\"\n" \
|
||||
|
|
@ -283,7 +283,7 @@ __asm__ __volatile__("1: stb %r2,%1\n" \
|
|||
/* Unfortunately, we can't get an unaligned access trap for the sub-word
|
||||
write, so we have to do a general unaligned operation. */
|
||||
|
||||
#define __put_user_16(x,addr) \
|
||||
#define __put_user_16(x, addr) \
|
||||
{ \
|
||||
long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4; \
|
||||
__asm__ __volatile__( \
|
||||
|
|
@ -308,13 +308,13 @@ __asm__ __volatile__("1: stb %r2,%1\n" \
|
|||
" .long 4b - .\n" \
|
||||
" lda $31, 5b-4b(%0)\n" \
|
||||
".previous" \
|
||||
: "=r"(__pu_err), "=&r"(__pu_tmp1), \
|
||||
"=&r"(__pu_tmp2), "=&r"(__pu_tmp3), \
|
||||
: "=r"(__pu_err), "=&r"(__pu_tmp1), \
|
||||
"=&r"(__pu_tmp2), "=&r"(__pu_tmp3), \
|
||||
"=&r"(__pu_tmp4) \
|
||||
: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
|
||||
}
|
||||
|
||||
#define __put_user_8(x,addr) \
|
||||
#define __put_user_8(x, addr) \
|
||||
{ \
|
||||
long __pu_tmp1, __pu_tmp2; \
|
||||
__asm__ __volatile__( \
|
||||
|
|
@ -330,7 +330,7 @@ __asm__ __volatile__("1: stb %r2,%1\n" \
|
|||
" .long 2b - .\n" \
|
||||
" lda $31, 3b-2b(%0)\n" \
|
||||
".previous" \
|
||||
: "=r"(__pu_err), \
|
||||
: "=r"(__pu_err), \
|
||||
"=&r"(__pu_tmp1), "=&r"(__pu_tmp2) \
|
||||
: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
|
||||
}
|
||||
|
|
@ -366,7 +366,7 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
|
|||
: "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to)
|
||||
: __module_address(__copy_user)
|
||||
"0" (__cu_len), "1" (__cu_from), "2" (__cu_to)
|
||||
: "$1","$2","$3","$4","$5","$28","memory");
|
||||
: "$1", "$2", "$3", "$4", "$5", "$28", "memory");
|
||||
|
||||
return __cu_len;
|
||||
}
|
||||
|
|
@ -379,15 +379,15 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
|
|||
return len;
|
||||
}
|
||||
|
||||
#define __copy_to_user(to,from,n) \
|
||||
#define __copy_to_user(to, from, n) \
|
||||
({ \
|
||||
__chk_user_ptr(to); \
|
||||
__copy_tofrom_user_nocheck((__force void *)(to),(from),(n)); \
|
||||
__copy_tofrom_user_nocheck((__force void *)(to), (from), (n)); \
|
||||
})
|
||||
#define __copy_from_user(to,from,n) \
|
||||
#define __copy_from_user(to, from, n) \
|
||||
({ \
|
||||
__chk_user_ptr(from); \
|
||||
__copy_tofrom_user_nocheck((to),(__force void *)(from),(n)); \
|
||||
__copy_tofrom_user_nocheck((to), (__force void *)(from), (n)); \
|
||||
})
|
||||
|
||||
#define __copy_to_user_inatomic __copy_to_user
|
||||
|
|
@ -418,7 +418,7 @@ __clear_user(void __user *to, long len)
|
|||
: "=r"(__cl_len), "=r"(__cl_to)
|
||||
: __module_address(__do_clear_user)
|
||||
"0"(__cl_len), "1"(__cl_to)
|
||||
: "$1","$2","$3","$4","$5","$28","memory");
|
||||
: "$1", "$2", "$3", "$4", "$5", "$28", "memory");
|
||||
return __cl_len;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -112,7 +112,7 @@
|
|||
chan_allocation_order = <0>;
|
||||
chan_priority = <1>;
|
||||
block_size = <0x7ff>;
|
||||
data_width = <2 0 0 0>;
|
||||
data_width = <2>;
|
||||
clocks = <&ahb_clk>;
|
||||
clock-names = "hclk";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -195,6 +195,7 @@
|
|||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
|
|
|
|||
|
|
@ -133,20 +133,6 @@
|
|||
>;
|
||||
};
|
||||
|
||||
i2c1_pins_default: i2c1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
|
||||
0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins_sleep: i2c1_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
|
||||
0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins_default: pinmux_mmc1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
|
||||
|
|
@ -254,7 +240,7 @@
|
|||
status = "okay";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c0_pins_default>;
|
||||
pinctrl-1 = <&i2c0_pins_default>;
|
||||
pinctrl-1 = <&i2c0_pins_sleep>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
at24@50 {
|
||||
|
|
@ -262,17 +248,10 @@
|
|||
pagesize = <64>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_pins_default>;
|
||||
pinctrl-1 = <&i2c1_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps62362@60 {
|
||||
compatible = "ti,tps62362";
|
||||
reg = <0x60>;
|
||||
regulator-name = "VDD_MPU";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1330000>;
|
||||
|
|
|
|||
|
|
@ -549,14 +549,6 @@
|
|||
pinctrl-0 = <&usb1_pins>;
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -70,6 +70,26 @@
|
|||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@18008000 {
|
||||
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
|
||||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@1800b000 {
|
||||
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
|
||||
reg = <0x1800b000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@18020000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x18020000 0x100>;
|
||||
|
|
|
|||
|
|
@ -66,8 +66,9 @@
|
|||
reg = <0x1d000 0x1000>;
|
||||
cache-unified;
|
||||
cache-level = <2>;
|
||||
cache-sets = <16>;
|
||||
cache-size = <0x80000>;
|
||||
cache-size = <524288>;
|
||||
cache-sets = <1024>;
|
||||
cache-line-size = <32>;
|
||||
interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -35,6 +35,18 @@
|
|||
DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */
|
||||
>;
|
||||
};
|
||||
|
||||
usb0_pins: pinmux_usb0_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
|
||||
usb1_pins: pinmux_usb0_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
|
|
@ -127,3 +139,16 @@
|
|||
&mmc1 {
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
};
|
||||
|
||||
/* At least dm8168-evm rev c won't support multipoint, later may */
|
||||
&usb0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
mentor,multipoint = <0>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
mentor,multipoint = <0>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -97,10 +97,31 @@
|
|||
|
||||
/* Device Configuration Registers */
|
||||
scm_conf: syscon@600 {
|
||||
compatible = "syscon";
|
||||
compatible = "syscon", "simple-bus";
|
||||
reg = <0x600 0x110>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x600 0x110>;
|
||||
|
||||
usb_phy0: usb-phy@20 {
|
||||
compatible = "ti,dm8168-usb-phy";
|
||||
reg = <0x20 0x8>;
|
||||
reg-names = "phy";
|
||||
clocks = <&main_fapll 6>;
|
||||
clock-names = "refclk";
|
||||
#phy-cells = <0>;
|
||||
syscon = <&scm_conf>;
|
||||
};
|
||||
|
||||
usb_phy1: usb-phy@28 {
|
||||
compatible = "ti,dm8168-usb-phy";
|
||||
reg = <0x28 0x8>;
|
||||
reg-names = "phy";
|
||||
clocks = <&main_fapll 6>;
|
||||
clock-names = "refclk";
|
||||
#phy-cells = <0>;
|
||||
syscon = <&scm_conf>;
|
||||
};
|
||||
};
|
||||
|
||||
scrm_clocks: clocks {
|
||||
|
|
@ -357,7 +378,10 @@
|
|||
reg-names = "mc", "control";
|
||||
interrupts = <18>;
|
||||
interrupt-names = "mc";
|
||||
dr_mode = "otg";
|
||||
dr_mode = "host";
|
||||
interface-type = <0>;
|
||||
phys = <&usb_phy0>;
|
||||
phy-names = "usb2-phy";
|
||||
mentor,multipoint = <1>;
|
||||
mentor,num-eps = <16>;
|
||||
mentor,ram-bits = <12>;
|
||||
|
|
@ -366,13 +390,15 @@
|
|||
|
||||
usb1: usb@47401800 {
|
||||
compatible = "ti,musb-am33xx";
|
||||
status = "disabled";
|
||||
reg = <0x47401c00 0x400
|
||||
0x47401800 0x200>;
|
||||
reg-names = "mc", "control";
|
||||
interrupts = <19>;
|
||||
interrupt-names = "mc";
|
||||
dr_mode = "otg";
|
||||
dr_mode = "host";
|
||||
interface-type = <0>;
|
||||
phys = <&usb_phy1>;
|
||||
phy-names = "usb2-phy";
|
||||
mentor,multipoint = <1>;
|
||||
mentor,num-eps = <16>;
|
||||
mentor,ram-bits = <12>;
|
||||
|
|
|
|||
|
|
@ -543,14 +543,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "peripheral";
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
|
|
@ -249,8 +249,8 @@
|
|||
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <32>;
|
||||
#dma-requests = <127>;
|
||||
dma-channels = <32>;
|
||||
dma-requests = <127>;
|
||||
};
|
||||
|
||||
gpio1: gpio@4ae10000 {
|
||||
|
|
@ -1090,8 +1090,8 @@
|
|||
<0x4A096800 0x40>; /* pll_ctrl */
|
||||
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
||||
ctrl-module = <&omap_control_sata>;
|
||||
clocks = <&sys_clkin1>;
|
||||
clock-names = "sysclk";
|
||||
clocks = <&sys_clkin1>, <&sata_ref_clk>;
|
||||
clock-names = "sysclk", "refclk";
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -380,14 +380,6 @@
|
|||
phy-supply = <&ldo4_reg>;
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "peripheral";
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
|
|
@ -87,8 +87,8 @@
|
|||
<14>,
|
||||
<15>;
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <32>;
|
||||
#dma-requests = <64>;
|
||||
dma-channels = <32>;
|
||||
dma-requests = <64>;
|
||||
};
|
||||
|
||||
i2c1: i2c@48070000 {
|
||||
|
|
|
|||
|
|
@ -16,6 +16,13 @@
|
|||
model = "Nokia N900";
|
||||
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
|
||||
|
||||
aliases {
|
||||
i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&vcc>;
|
||||
|
|
@ -704,7 +711,7 @@
|
|||
compatible = "smsc,lan91c94";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
|
||||
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
|
||||
reg = <1 0 0xf>; /* 16 byte IO range */
|
||||
bank-width = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet_pins>;
|
||||
|
|
|
|||
|
|
@ -155,8 +155,8 @@
|
|||
<14>,
|
||||
<15>;
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <32>;
|
||||
#dma-requests = <96>;
|
||||
dma-channels = <32>;
|
||||
dma-requests = <96>;
|
||||
};
|
||||
|
||||
omap3_pmx_core: pinmux@48002030 {
|
||||
|
|
|
|||
|
|
@ -223,8 +223,8 @@
|
|||
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <32>;
|
||||
#dma-requests = <127>;
|
||||
dma-channels = <32>;
|
||||
dma-requests = <127>;
|
||||
};
|
||||
|
||||
gpio1: gpio@4a310000 {
|
||||
|
|
|
|||
|
|
@ -238,8 +238,8 @@
|
|||
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <32>;
|
||||
#dma-requests = <127>;
|
||||
dma-channels = <32>;
|
||||
dma-requests = <127>;
|
||||
};
|
||||
|
||||
gpio1: gpio@4ae10000 {
|
||||
|
|
@ -929,8 +929,8 @@
|
|||
<0x4A096800 0x40>; /* pll_ctrl */
|
||||
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
||||
ctrl-module = <&omap_control_sata>;
|
||||
clocks = <&sys_clkin>;
|
||||
clock-names = "sysclk";
|
||||
clocks = <&sys_clkin>, <&sata_ref_clk>;
|
||||
clock-names = "sysclk", "refclk";
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -117,7 +117,7 @@
|
|||
chan_priority = <1>;
|
||||
block_size = <0xfff>;
|
||||
dma-masters = <2>;
|
||||
data_width = <3 3 0 0>;
|
||||
data_width = <3 3>;
|
||||
};
|
||||
|
||||
dma@eb000000 {
|
||||
|
|
@ -133,7 +133,7 @@
|
|||
chan_allocation_order = <1>;
|
||||
chan_priority = <1>;
|
||||
block_size = <0xfff>;
|
||||
data_width = <3 3 0 0>;
|
||||
data_width = <3 3>;
|
||||
};
|
||||
|
||||
fsmc: flash@b0000000 {
|
||||
|
|
|
|||
|
|
@ -294,35 +294,43 @@
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc0";
|
||||
clock-output-names = "mmc0",
|
||||
"mmc0_output",
|
||||
"mmc0_sample";
|
||||
};
|
||||
|
||||
mmc1_clk: clk@01c2008c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c2008c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc1";
|
||||
clock-output-names = "mmc1",
|
||||
"mmc1_output",
|
||||
"mmc1_sample";
|
||||
};
|
||||
|
||||
mmc2_clk: clk@01c20090 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20090 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc2";
|
||||
clock-output-names = "mmc2",
|
||||
"mmc2_output",
|
||||
"mmc2_sample";
|
||||
};
|
||||
|
||||
mmc3_clk: clk@01c20094 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20094 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc3";
|
||||
clock-output-names = "mmc3",
|
||||
"mmc3_output",
|
||||
"mmc3_sample";
|
||||
};
|
||||
|
||||
ts_clk: clk@01c20098 {
|
||||
|
|
@ -468,8 +476,14 @@
|
|||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun4i-a10-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 8>,
|
||||
<&mmc0_clk 0>,
|
||||
<&mmc0_clk 1>,
|
||||
<&mmc0_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -477,8 +491,14 @@
|
|||
mmc1: mmc@01c10000 {
|
||||
compatible = "allwinner,sun4i-a10-mmc";
|
||||
reg = <0x01c10000 0x1000>;
|
||||
clocks = <&ahb_gates 9>, <&mmc1_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 9>,
|
||||
<&mmc1_clk 0>,
|
||||
<&mmc1_clk 1>,
|
||||
<&mmc1_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <33>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -486,8 +506,14 @@
|
|||
mmc2: mmc@01c11000 {
|
||||
compatible = "allwinner,sun4i-a10-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ahb_gates 10>, <&mmc2_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 10>,
|
||||
<&mmc2_clk 0>,
|
||||
<&mmc2_clk 1>,
|
||||
<&mmc2_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <34>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -495,8 +521,14 @@
|
|||
mmc3: mmc@01c12000 {
|
||||
compatible = "allwinner,sun4i-a10-mmc";
|
||||
reg = <0x01c12000 0x1000>;
|
||||
clocks = <&ahb_gates 11>, <&mmc3_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 11>,
|
||||
<&mmc3_clk 0>,
|
||||
<&mmc3_clk 1>,
|
||||
<&mmc3_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <35>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -218,27 +218,33 @@
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc0";
|
||||
clock-output-names = "mmc0",
|
||||
"mmc0_output",
|
||||
"mmc0_sample";
|
||||
};
|
||||
|
||||
mmc1_clk: clk@01c2008c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c2008c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc1";
|
||||
clock-output-names = "mmc1",
|
||||
"mmc1_output",
|
||||
"mmc1_sample";
|
||||
};
|
||||
|
||||
mmc2_clk: clk@01c20090 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20090 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc2";
|
||||
clock-output-names = "mmc2",
|
||||
"mmc2_output",
|
||||
"mmc2_sample";
|
||||
};
|
||||
|
||||
ts_clk: clk@01c20098 {
|
||||
|
|
@ -368,8 +374,14 @@
|
|||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 8>,
|
||||
<&mmc0_clk 0>,
|
||||
<&mmc0_clk 1>,
|
||||
<&mmc0_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -377,8 +389,14 @@
|
|||
mmc1: mmc@01c10000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c10000 0x1000>;
|
||||
clocks = <&ahb_gates 9>, <&mmc1_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 9>,
|
||||
<&mmc1_clk 0>,
|
||||
<&mmc1_clk 1>,
|
||||
<&mmc1_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <33>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -386,8 +404,14 @@
|
|||
mmc2: mmc@01c11000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ahb_gates 10>, <&mmc2_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 10>,
|
||||
<&mmc2_clk 0>,
|
||||
<&mmc2_clk 1>,
|
||||
<&mmc2_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <34>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -257,27 +257,33 @@
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc0";
|
||||
clock-output-names = "mmc0",
|
||||
"mmc0_output",
|
||||
"mmc0_sample";
|
||||
};
|
||||
|
||||
mmc1_clk: clk@01c2008c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c2008c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc1";
|
||||
clock-output-names = "mmc1",
|
||||
"mmc1_output",
|
||||
"mmc1_sample";
|
||||
};
|
||||
|
||||
mmc2_clk: clk@01c20090 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20090 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc2";
|
||||
clock-output-names = "mmc2",
|
||||
"mmc2_output",
|
||||
"mmc2_sample";
|
||||
};
|
||||
|
||||
ts_clk: clk@01c20098 {
|
||||
|
|
@ -391,8 +397,14 @@
|
|||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 8>,
|
||||
<&mmc0_clk 0>,
|
||||
<&mmc0_clk 1>,
|
||||
<&mmc0_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -400,8 +412,14 @@
|
|||
mmc2: mmc@01c11000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ahb_gates 10>, <&mmc2_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 10>,
|
||||
<&mmc2_clk 0>,
|
||||
<&mmc2_clk 1>,
|
||||
<&mmc2_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <34>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -190,19 +190,11 @@
|
|||
clock-output-names = "axi";
|
||||
};
|
||||
|
||||
ahb1_mux: ahb1_mux@01c20054 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
|
||||
reg = <0x01c20054 0x4>;
|
||||
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
|
||||
clock-output-names = "ahb1_mux";
|
||||
};
|
||||
|
||||
ahb1: ahb1@01c20054 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-ahb-clk";
|
||||
compatible = "allwinner,sun6i-a31-ahb1-clk";
|
||||
reg = <0x01c20054 0x4>;
|
||||
clocks = <&ahb1_mux>;
|
||||
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
|
||||
clock-output-names = "ahb1";
|
||||
};
|
||||
|
||||
|
|
@ -265,35 +257,43 @@
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc0";
|
||||
clock-output-names = "mmc0",
|
||||
"mmc0_output",
|
||||
"mmc0_sample";
|
||||
};
|
||||
|
||||
mmc1_clk: clk@01c2008c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c2008c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc1";
|
||||
clock-output-names = "mmc1",
|
||||
"mmc1_output",
|
||||
"mmc1_sample";
|
||||
};
|
||||
|
||||
mmc2_clk: clk@01c20090 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20090 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc2";
|
||||
clock-output-names = "mmc2",
|
||||
"mmc2_output",
|
||||
"mmc2_sample";
|
||||
};
|
||||
|
||||
mmc3_clk: clk@01c20094 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20094 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc3";
|
||||
clock-output-names = "mmc3",
|
||||
"mmc3_output",
|
||||
"mmc3_sample";
|
||||
};
|
||||
|
||||
spi0_clk: clk@01c200a0 {
|
||||
|
|
@ -383,15 +383,21 @@
|
|||
#dma-cells = <1>;
|
||||
|
||||
/* DMA controller requires AHB1 clocked from PLL6 */
|
||||
assigned-clocks = <&ahb1_mux>;
|
||||
assigned-clocks = <&ahb1>;
|
||||
assigned-clock-parents = <&pll6 0>;
|
||||
};
|
||||
|
||||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb1_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 8>,
|
||||
<&mmc0_clk 0>,
|
||||
<&mmc0_clk 1>,
|
||||
<&mmc0_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 8>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -401,8 +407,14 @@
|
|||
mmc1: mmc@01c10000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c10000 0x1000>;
|
||||
clocks = <&ahb1_gates 9>, <&mmc1_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 9>,
|
||||
<&mmc1_clk 0>,
|
||||
<&mmc1_clk 1>,
|
||||
<&mmc1_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 9>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -412,8 +424,14 @@
|
|||
mmc2: mmc@01c11000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ahb1_gates 10>, <&mmc2_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 10>,
|
||||
<&mmc2_clk 0>,
|
||||
<&mmc2_clk 1>,
|
||||
<&mmc2_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 10>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -423,8 +441,14 @@
|
|||
mmc3: mmc@01c12000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c12000 0x1000>;
|
||||
clocks = <&ahb1_gates 11>, <&mmc3_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 11>,
|
||||
<&mmc3_clk 0>,
|
||||
<&mmc3_clk 1>,
|
||||
<&mmc3_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 11>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -337,35 +337,43 @@
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc0";
|
||||
clock-output-names = "mmc0",
|
||||
"mmc0_output",
|
||||
"mmc0_sample";
|
||||
};
|
||||
|
||||
mmc1_clk: clk@01c2008c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c2008c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc1";
|
||||
clock-output-names = "mmc1",
|
||||
"mmc1_output",
|
||||
"mmc1_sample";
|
||||
};
|
||||
|
||||
mmc2_clk: clk@01c20090 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20090 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc2";
|
||||
clock-output-names = "mmc2",
|
||||
"mmc2_output",
|
||||
"mmc2_sample";
|
||||
};
|
||||
|
||||
mmc3_clk: clk@01c20094 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20094 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
||||
clock-output-names = "mmc3";
|
||||
clock-output-names = "mmc3",
|
||||
"mmc3_output",
|
||||
"mmc3_sample";
|
||||
};
|
||||
|
||||
ts_clk: clk@01c20098 {
|
||||
|
|
@ -583,8 +591,14 @@
|
|||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 8>,
|
||||
<&mmc0_clk 0>,
|
||||
<&mmc0_clk 1>,
|
||||
<&mmc0_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -592,8 +606,14 @@
|
|||
mmc1: mmc@01c10000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c10000 0x1000>;
|
||||
clocks = <&ahb_gates 9>, <&mmc1_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 9>,
|
||||
<&mmc1_clk 0>,
|
||||
<&mmc1_clk 1>,
|
||||
<&mmc1_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -601,8 +621,14 @@
|
|||
mmc2: mmc@01c11000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ahb_gates 10>, <&mmc2_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 10>,
|
||||
<&mmc2_clk 0>,
|
||||
<&mmc2_clk 1>,
|
||||
<&mmc2_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -610,8 +636,14 @@
|
|||
mmc3: mmc@01c12000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c12000 0x1000>;
|
||||
clocks = <&ahb_gates 11>, <&mmc3_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb_gates 11>,
|
||||
<&mmc3_clk 0>,
|
||||
<&mmc3_clk 1>,
|
||||
<&mmc3_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -119,11 +119,19 @@
|
|||
};
|
||||
|
||||
/* dummy clock until actually implemented */
|
||||
pll6: pll6_clk {
|
||||
pll5: pll5_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <600000000>;
|
||||
clock-output-names = "pll6";
|
||||
clock-frequency = <0>;
|
||||
clock-output-names = "pll5";
|
||||
};
|
||||
|
||||
pll6: clk@01c20028 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun6i-a31-pll6-clk";
|
||||
reg = <0x01c20028 0x4>;
|
||||
clocks = <&osc24M>;
|
||||
clock-output-names = "pll6", "pll6x2";
|
||||
};
|
||||
|
||||
cpu: cpu_clk@01c20050 {
|
||||
|
|
@ -149,19 +157,11 @@
|
|||
clock-output-names = "axi";
|
||||
};
|
||||
|
||||
ahb1_mux: ahb1_mux_clk@01c20054 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
|
||||
reg = <0x01c20054 0x4>;
|
||||
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
|
||||
clock-output-names = "ahb1_mux";
|
||||
};
|
||||
|
||||
ahb1: ahb1_clk@01c20054 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-ahb-clk";
|
||||
compatible = "allwinner,sun6i-a31-ahb1-clk";
|
||||
reg = <0x01c20054 0x4>;
|
||||
clocks = <&ahb1_mux>;
|
||||
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
|
||||
clock-output-names = "ahb1";
|
||||
};
|
||||
|
||||
|
|
@ -202,7 +202,7 @@
|
|||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-apb1-clk";
|
||||
reg = <0x01c20058 0x4>;
|
||||
clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
|
||||
clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
|
||||
clock-output-names = "apb2";
|
||||
};
|
||||
|
||||
|
|
@ -218,27 +218,41 @@
|
|||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
clocks = <&osc24M>, <&pll6>;
|
||||
clock-output-names = "mmc0";
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc0",
|
||||
"mmc0_output",
|
||||
"mmc0_sample";
|
||||
};
|
||||
|
||||
mmc1_clk: clk@01c2008c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c2008c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6>;
|
||||
clock-output-names = "mmc1";
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc1",
|
||||
"mmc1_output",
|
||||
"mmc1_sample";
|
||||
};
|
||||
|
||||
mmc2_clk: clk@01c20090 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-mod0-clk";
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20090 0x4>;
|
||||
clocks = <&osc24M>, <&pll6>;
|
||||
clock-output-names = "mmc2";
|
||||
clocks = <&osc24M>, <&pll6 0>;
|
||||
clock-output-names = "mmc2",
|
||||
"mmc2_output",
|
||||
"mmc2_sample";
|
||||
};
|
||||
|
||||
mbus_clk: clk@01c2015c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun8i-a23-mbus-clk";
|
||||
reg = <0x01c2015c 0x4>;
|
||||
clocks = <&osc24M>, <&pll6 1>, <&pll5>;
|
||||
clock-output-names = "mbus";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -260,8 +274,14 @@
|
|||
mmc0: mmc@01c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb1_gates 8>, <&mmc0_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 8>,
|
||||
<&mmc0_clk 0>,
|
||||
<&mmc0_clk 1>,
|
||||
<&mmc0_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 8>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -271,8 +291,14 @@
|
|||
mmc1: mmc@01c10000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c10000 0x1000>;
|
||||
clocks = <&ahb1_gates 9>, <&mmc1_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 9>,
|
||||
<&mmc1_clk 0>,
|
||||
<&mmc1_clk 1>,
|
||||
<&mmc1_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 9>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -282,8 +308,14 @@
|
|||
mmc2: mmc@01c11000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c11000 0x1000>;
|
||||
clocks = <&ahb1_gates 10>, <&mmc2_clk>;
|
||||
clock-names = "ahb", "mmc";
|
||||
clocks = <&ahb1_gates 10>,
|
||||
<&mmc2_clk 0>,
|
||||
<&mmc2_clk 1>,
|
||||
<&mmc2_clk 2>;
|
||||
clock-names = "ahb",
|
||||
"mmc",
|
||||
"output",
|
||||
"sample";
|
||||
resets = <&ahb1_rst 10>;
|
||||
reset-names = "ahb";
|
||||
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -62,6 +62,17 @@ CONFIG_MACH_SPEAR1340=y
|
|||
CONFIG_ARCH_STI=y
|
||||
CONFIG_ARCH_EXYNOS=y
|
||||
CONFIG_EXYNOS5420_MCPM=y
|
||||
CONFIG_ARCH_SHMOBILE_MULTI=y
|
||||
CONFIG_ARCH_EMEV2=y
|
||||
CONFIG_ARCH_R7S72100=y
|
||||
CONFIG_ARCH_R8A73A4=y
|
||||
CONFIG_ARCH_R8A7740=y
|
||||
CONFIG_ARCH_R8A7779=y
|
||||
CONFIG_ARCH_R8A7790=y
|
||||
CONFIG_ARCH_R8A7791=y
|
||||
CONFIG_ARCH_R8A7794=y
|
||||
CONFIG_ARCH_SH73A0=y
|
||||
CONFIG_MACH_MARZEN=y
|
||||
CONFIG_ARCH_SUNXI=y
|
||||
CONFIG_ARCH_SIRF=y
|
||||
CONFIG_ARCH_TEGRA=y
|
||||
|
|
@ -84,6 +95,8 @@ CONFIG_PCI_KEYSTONE=y
|
|||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_MVEBU=y
|
||||
CONFIG_PCI_TEGRA=y
|
||||
CONFIG_PCI_RCAR_GEN2=y
|
||||
CONFIG_PCI_RCAR_GEN2_PCIE=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_NR_CPUS=8
|
||||
|
|
@ -130,6 +143,7 @@ CONFIG_DEVTMPFS_MOUNT=y
|
|||
CONFIG_DMA_CMA=y
|
||||
CONFIG_CMA_SIZE_MBYTES=64
|
||||
CONFIG_OMAP_OCP2SCP=y
|
||||
CONFIG_SIMPLE_PM_BUS=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
|
|
@ -157,6 +171,7 @@ CONFIG_AHCI_SUNXI=y
|
|||
CONFIG_AHCI_TEGRA=y
|
||||
CONFIG_SATA_HIGHBANK=y
|
||||
CONFIG_SATA_MV=y
|
||||
CONFIG_SATA_RCAR=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_HIX5HD2_GMAC=y
|
||||
CONFIG_SUN4I_EMAC=y
|
||||
|
|
@ -167,14 +182,17 @@ CONFIG_MV643XX_ETH=y
|
|||
CONFIG_MVNETA=y
|
||||
CONFIG_KS8851=y
|
||||
CONFIG_R8169=y
|
||||
CONFIG_SH_ETH=y
|
||||
CONFIG_SMSC911X=y
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_TI_CPSW=y
|
||||
CONFIG_XILINX_EMACLITE=y
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_SMSC_PHY=y
|
||||
CONFIG_BROADCOM_PHY=y
|
||||
CONFIG_ICPLUS_PHY=y
|
||||
CONFIG_MICREL_PHY=y
|
||||
CONFIG_USB_PEGASUS=y
|
||||
CONFIG_USB_USBNET=y
|
||||
CONFIG_USB_NET_SMSC75XX=y
|
||||
|
|
@ -192,15 +210,18 @@ CONFIG_KEYBOARD_CROS_EC=y
|
|||
CONFIG_MOUSE_PS2_ELANTECH=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
|
||||
CONFIG_TOUCHSCREEN_ST1232=m
|
||||
CONFIG_TOUCHSCREEN_STMPE=y
|
||||
CONFIG_TOUCHSCREEN_SUN4I=y
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_MPU3050=y
|
||||
CONFIG_INPUT_AXP20X_PEK=y
|
||||
CONFIG_INPUT_ADXL34X=m
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_SERIAL_8250_EM=y
|
||||
CONFIG_SERIAL_8250_MT6577=y
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
|
|
@ -213,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y
|
|||
CONFIG_SERIAL_TEGRA=y
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SERIAL_SH_SCI=y
|
||||
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
|
||||
CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
||||
CONFIG_SERIAL_MSM=y
|
||||
CONFIG_SERIAL_MSM_CONSOLE=y
|
||||
CONFIG_SERIAL_VT8500=y
|
||||
|
|
@ -233,19 +257,26 @@ CONFIG_I2C_MUX_PCA954x=y
|
|||
CONFIG_I2C_MUX_PINCTRL=y
|
||||
CONFIG_I2C_CADENCE=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_I2C_GPIO=m
|
||||
CONFIG_I2C_EXYNOS5=y
|
||||
CONFIG_I2C_MV64XXX=y
|
||||
CONFIG_I2C_RIIC=y
|
||||
CONFIG_I2C_S3C2410=y
|
||||
CONFIG_I2C_SH_MOBILE=y
|
||||
CONFIG_I2C_SIRF=y
|
||||
CONFIG_I2C_TEGRA=y
|
||||
CONFIG_I2C_ST=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_I2C_TEGRA=y
|
||||
CONFIG_I2C_XILINX=y
|
||||
CONFIG_SPI_DAVINCI=y
|
||||
CONFIG_I2C_RCAR=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_CADENCE=y
|
||||
CONFIG_SPI_DAVINCI=y
|
||||
CONFIG_SPI_OMAP24XX=y
|
||||
CONFIG_SPI_ORION=y
|
||||
CONFIG_SPI_PL022=y
|
||||
CONFIG_SPI_RSPI=y
|
||||
CONFIG_SPI_SH_MSIOF=m
|
||||
CONFIG_SPI_SH_HSPI=y
|
||||
CONFIG_SPI_SIRF=y
|
||||
CONFIG_SPI_SUN4I=y
|
||||
CONFIG_SPI_SUN6I=y
|
||||
|
|
@ -259,12 +290,15 @@ CONFIG_PINCTRL_PALMAS=y
|
|||
CONFIG_PINCTRL_APQ8084=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GPIO_DWAPB=y
|
||||
CONFIG_GPIO_DAVINCI=y
|
||||
CONFIG_GPIO_DWAPB=y
|
||||
CONFIG_GPIO_EM=y
|
||||
CONFIG_GPIO_RCAR=y
|
||||
CONFIG_GPIO_XILINX=y
|
||||
CONFIG_GPIO_ZYNQ=y
|
||||
CONFIG_GPIO_PCA953X=y
|
||||
CONFIG_GPIO_PCA953X_IRQ=y
|
||||
CONFIG_GPIO_PCF857X=y
|
||||
CONFIG_GPIO_TWL4030=y
|
||||
CONFIG_GPIO_PALMAS=y
|
||||
CONFIG_GPIO_SYSCON=y
|
||||
|
|
@ -276,10 +310,12 @@ CONFIG_POWER_RESET_AS3722=y
|
|||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_RESET_KEYSTONE=y
|
||||
CONFIG_POWER_RESET_SUN6I=y
|
||||
CONFIG_POWER_RESET_RMOBILE=y
|
||||
CONFIG_SENSORS_LM90=y
|
||||
CONFIG_SENSORS_LM95245=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_RCAR_THERMAL=y
|
||||
CONFIG_ARMADA_THERMAL=y
|
||||
CONFIG_DAVINCI_WATCHDOG
|
||||
CONFIG_ST_THERMAL_SYSCFG=y
|
||||
|
|
@ -290,6 +326,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
|
|||
CONFIG_ORION_WATCHDOG=y
|
||||
CONFIG_SUNXI_WATCHDOG=y
|
||||
CONFIG_MESON_WATCHDOG=y
|
||||
CONFIG_MFD_AS3711=y
|
||||
CONFIG_MFD_AS3722=y
|
||||
CONFIG_MFD_BCM590XX=y
|
||||
CONFIG_MFD_AXP20X=y
|
||||
|
|
@ -304,13 +341,16 @@ CONFIG_MFD_TPS65090=y
|
|||
CONFIG_MFD_TPS6586X=y
|
||||
CONFIG_MFD_TPS65910=y
|
||||
CONFIG_REGULATOR_AB8500=y
|
||||
CONFIG_REGULATOR_AS3711=y
|
||||
CONFIG_REGULATOR_AS3722=y
|
||||
CONFIG_REGULATOR_AXP20X=y
|
||||
CONFIG_REGULATOR_BCM590XX=y
|
||||
CONFIG_REGULATOR_DA9210=y
|
||||
CONFIG_REGULATOR_GPIO=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_REGULATOR_MAX8907=y
|
||||
CONFIG_REGULATOR_MAX8973=y
|
||||
CONFIG_REGULATOR_MAX77686=y
|
||||
CONFIG_REGULATOR_PALMAS=y
|
||||
CONFIG_REGULATOR_S2MPS11=y
|
||||
|
|
@ -324,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y
|
|||
CONFIG_REGULATOR_VEXPRESS=y
|
||||
CONFIG_MEDIA_SUPPORT=y
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_MEDIA_CONTROLLER=y
|
||||
CONFIG_VIDEO_V4L2_SUBDEV_API=y
|
||||
CONFIG_MEDIA_USB_SUPPORT=y
|
||||
CONFIG_USB_VIDEO_CLASS=y
|
||||
CONFIG_USB_GSPCA=y
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_SOC_CAMERA=m
|
||||
CONFIG_SOC_CAMERA_PLATFORM=m
|
||||
CONFIG_VIDEO_RCAR_VIN=m
|
||||
CONFIG_V4L_MEM2MEM_DRIVERS=y
|
||||
CONFIG_VIDEO_RENESAS_VSP1=m
|
||||
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
|
||||
CONFIG_VIDEO_ADV7180=m
|
||||
CONFIG_DRM=y
|
||||
CONFIG_DRM_RCAR_DU=m
|
||||
CONFIG_DRM_TEGRA=y
|
||||
CONFIG_DRM_PANEL_SIMPLE=y
|
||||
CONFIG_FB_ARMCLCD=y
|
||||
CONFIG_FB_WM8505=y
|
||||
CONFIG_FB_SH_MOBILE_LCDC=y
|
||||
CONFIG_FB_SIMPLE=y
|
||||
CONFIG_FB_SH_MOBILE_MERAM=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
CONFIG_BACKLIGHT_AS3711=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
|
||||
CONFIG_SOUND=y
|
||||
|
|
@ -343,6 +397,8 @@ CONFIG_SND=y
|
|||
CONFIG_SND_DYNAMIC_MINORS=y
|
||||
CONFIG_SND_USB_AUDIO=y
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_SND_SOC_SH4_FSI=m
|
||||
CONFIG_SND_SOC_RCAR=m
|
||||
CONFIG_SND_SOC_TEGRA=y
|
||||
CONFIG_SND_SOC_TEGRA_RT5640=y
|
||||
CONFIG_SND_SOC_TEGRA_WM8753=y
|
||||
|
|
@ -350,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y
|
|||
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
|
||||
CONFIG_SND_SOC_TEGRA_ALC5632=y
|
||||
CONFIG_SND_SOC_TEGRA_MAX98090=y
|
||||
CONFIG_SND_SOC_AK4642=m
|
||||
CONFIG_SND_SOC_WM8978=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_MVEBU=y
|
||||
|
|
@ -362,6 +420,8 @@ CONFIG_USB_ISP1760_HCD=y
|
|||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_STI=y
|
||||
CONFIG_USB_OHCI_HCD_PLATFORM=y
|
||||
CONFIG_USB_R8A66597_HCD=m
|
||||
CONFIG_USB_RENESAS_USBHS=m
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
|
|
@ -374,6 +434,10 @@ CONFIG_SAMSUNG_USB3PHY=y
|
|||
CONFIG_USB_GPIO_VBUS=y
|
||||
CONFIG_USB_ISP1301=y
|
||||
CONFIG_USB_MXS_PHY=y
|
||||
CONFIG_USB_RCAR_PHY=m
|
||||
CONFIG_USB_RCAR_GEN2_PHY=m
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_RENESAS_USBHS_UDC=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK_MINORS=16
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
|
|
@ -392,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y
|
|||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_MMC_MVSDIO=y
|
||||
CONFIG_MMC_SUNXI=y
|
||||
CONFIG_MMC_SDHI=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_IDMAC=y
|
||||
CONFIG_MMC_DW_PLTFM=y
|
||||
CONFIG_MMC_DW_EXYNOS=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SH_MMCIF=y
|
||||
CONFIG_MMC_SUNXI=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
|
|
@ -421,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y
|
|||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_MAX8907=y
|
||||
CONFIG_RTC_DRV_MAX77686=y
|
||||
CONFIG_RTC_DRV_RS5C372=m
|
||||
CONFIG_RTC_DRV_PALMAS=y
|
||||
CONFIG_RTC_DRV_TWL4030=y
|
||||
CONFIG_RTC_DRV_TPS6586X=y
|
||||
CONFIG_RTC_DRV_TPS65910=y
|
||||
CONFIG_RTC_DRV_S35390A=m
|
||||
CONFIG_RTC_DRV_EM3027=y
|
||||
CONFIG_RTC_DRV_PL031=y
|
||||
CONFIG_RTC_DRV_VT8500=y
|
||||
|
|
@ -436,6 +504,9 @@ CONFIG_DMADEVICES=y
|
|||
CONFIG_DW_DMAC=y
|
||||
CONFIG_MV_XOR=y
|
||||
CONFIG_TEGRA20_APB_DMA=y
|
||||
CONFIG_SH_DMAE=y
|
||||
CONFIG_RCAR_AUDMAC_PP=m
|
||||
CONFIG_RCAR_DMAC=y
|
||||
CONFIG_STE_DMA40=y
|
||||
CONFIG_SIRF_DMA=y
|
||||
CONFIG_TI_EDMA=y
|
||||
|
|
@ -468,6 +539,7 @@ CONFIG_IIO=y
|
|||
CONFIG_XILINX_XADC=y
|
||||
CONFIG_AK8975=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_RENESAS_TPU=y
|
||||
CONFIG_PWM_TEGRA=y
|
||||
CONFIG_PWM_VT8500=y
|
||||
CONFIG_PHY_HIX5HD2_SATA=y
|
||||
|
|
|
|||
|
|
@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y
|
|||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC_BCH=y
|
||||
CONFIG_MTD_NAND_OMAP2=y
|
||||
CONFIG_MTD_NAND_OMAP_BCH=y
|
||||
CONFIG_MTD_ONENAND=y
|
||||
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
|
||||
CONFIG_MTD_ONENAND_OMAP2=y
|
||||
|
|
@ -248,6 +249,7 @@ CONFIG_TWL6040_CORE=y
|
|||
CONFIG_REGULATOR_PALMAS=y
|
||||
CONFIG_REGULATOR_PBIAS=y
|
||||
CONFIG_REGULATOR_TI_ABB=y
|
||||
CONFIG_REGULATOR_TPS62360=m
|
||||
CONFIG_REGULATOR_TPS65023=y
|
||||
CONFIG_REGULATOR_TPS6507X=y
|
||||
CONFIG_REGULATOR_TPS65217=y
|
||||
|
|
@ -374,7 +376,7 @@ CONFIG_PWM_TIEHRPWM=m
|
|||
CONFIG_PWM_TWL=m
|
||||
CONFIG_PWM_TWL_LED=m
|
||||
CONFIG_OMAP_USB2=m
|
||||
CONFIG_TI_PIPE3=m
|
||||
CONFIG_TI_PIPE3=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
|
|
|
|||
|
|
@ -73,7 +73,7 @@ static inline void set_fs(mm_segment_t fs)
|
|||
modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
|
||||
}
|
||||
|
||||
#define segment_eq(a,b) ((a) == (b))
|
||||
#define segment_eq(a, b) ((a) == (b))
|
||||
|
||||
#define __addr_ok(addr) ({ \
|
||||
unsigned long flag; \
|
||||
|
|
@ -84,7 +84,7 @@ static inline void set_fs(mm_segment_t fs)
|
|||
(flag == 0); })
|
||||
|
||||
/* We use 33-bit arithmetic here... */
|
||||
#define __range_ok(addr,size) ({ \
|
||||
#define __range_ok(addr, size) ({ \
|
||||
unsigned long flag, roksum; \
|
||||
__chk_user_ptr(addr); \
|
||||
__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
|
||||
|
|
@ -123,7 +123,7 @@ extern int __get_user_64t_4(void *);
|
|||
#define __GUP_CLOBBER_32t_8 "lr", "cc"
|
||||
#define __GUP_CLOBBER_8 "lr", "cc"
|
||||
|
||||
#define __get_user_x(__r2,__p,__e,__l,__s) \
|
||||
#define __get_user_x(__r2, __p, __e, __l, __s) \
|
||||
__asm__ __volatile__ ( \
|
||||
__asmeq("%0", "r0") __asmeq("%1", "r2") \
|
||||
__asmeq("%3", "r1") \
|
||||
|
|
@ -134,7 +134,7 @@ extern int __get_user_64t_4(void *);
|
|||
|
||||
/* narrowing a double-word get into a single 32bit word register: */
|
||||
#ifdef __ARMEB__
|
||||
#define __get_user_x_32t(__r2, __p, __e, __l, __s) \
|
||||
#define __get_user_x_32t(__r2, __p, __e, __l, __s) \
|
||||
__get_user_x(__r2, __p, __e, __l, 32t_8)
|
||||
#else
|
||||
#define __get_user_x_32t __get_user_x
|
||||
|
|
@ -158,7 +158,7 @@ extern int __get_user_64t_4(void *);
|
|||
#endif
|
||||
|
||||
|
||||
#define __get_user_check(x,p) \
|
||||
#define __get_user_check(x, p) \
|
||||
({ \
|
||||
unsigned long __limit = current_thread_info()->addr_limit - 1; \
|
||||
register const typeof(*(p)) __user *__p asm("r0") = (p);\
|
||||
|
|
@ -196,10 +196,10 @@ extern int __get_user_64t_4(void *);
|
|||
__e; \
|
||||
})
|
||||
|
||||
#define get_user(x,p) \
|
||||
#define get_user(x, p) \
|
||||
({ \
|
||||
might_fault(); \
|
||||
__get_user_check(x,p); \
|
||||
__get_user_check(x, p); \
|
||||
})
|
||||
|
||||
extern int __put_user_1(void *, unsigned int);
|
||||
|
|
@ -207,7 +207,7 @@ extern int __put_user_2(void *, unsigned int);
|
|||
extern int __put_user_4(void *, unsigned int);
|
||||
extern int __put_user_8(void *, unsigned long long);
|
||||
|
||||
#define __put_user_x(__r2,__p,__e,__l,__s) \
|
||||
#define __put_user_x(__r2, __p, __e, __l, __s) \
|
||||
__asm__ __volatile__ ( \
|
||||
__asmeq("%0", "r0") __asmeq("%2", "r2") \
|
||||
__asmeq("%3", "r1") \
|
||||
|
|
@ -216,7 +216,7 @@ extern int __put_user_8(void *, unsigned long long);
|
|||
: "0" (__p), "r" (__r2), "r" (__l) \
|
||||
: "ip", "lr", "cc")
|
||||
|
||||
#define __put_user_check(x,p) \
|
||||
#define __put_user_check(x, p) \
|
||||
({ \
|
||||
unsigned long __limit = current_thread_info()->addr_limit - 1; \
|
||||
const typeof(*(p)) __user *__tmp_p = (p); \
|
||||
|
|
@ -242,10 +242,10 @@ extern int __put_user_8(void *, unsigned long long);
|
|||
__e; \
|
||||
})
|
||||
|
||||
#define put_user(x,p) \
|
||||
#define put_user(x, p) \
|
||||
({ \
|
||||
might_fault(); \
|
||||
__put_user_check(x,p); \
|
||||
__put_user_check(x, p); \
|
||||
})
|
||||
|
||||
#else /* CONFIG_MMU */
|
||||
|
|
@ -255,21 +255,21 @@ extern int __put_user_8(void *, unsigned long long);
|
|||
*/
|
||||
#define USER_DS KERNEL_DS
|
||||
|
||||
#define segment_eq(a,b) (1)
|
||||
#define __addr_ok(addr) ((void)(addr),1)
|
||||
#define __range_ok(addr,size) ((void)(addr),0)
|
||||
#define segment_eq(a, b) (1)
|
||||
#define __addr_ok(addr) ((void)(addr), 1)
|
||||
#define __range_ok(addr, size) ((void)(addr), 0)
|
||||
#define get_fs() (KERNEL_DS)
|
||||
|
||||
static inline void set_fs(mm_segment_t fs)
|
||||
{
|
||||
}
|
||||
|
||||
#define get_user(x,p) __get_user(x,p)
|
||||
#define put_user(x,p) __put_user(x,p)
|
||||
#define get_user(x, p) __get_user(x, p)
|
||||
#define put_user(x, p) __put_user(x, p)
|
||||
|
||||
#endif /* CONFIG_MMU */
|
||||
|
||||
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
|
||||
#define access_ok(type, addr, size) (__range_ok(addr, size) == 0)
|
||||
|
||||
#define user_addr_max() \
|
||||
(segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs())
|
||||
|
|
@ -283,35 +283,35 @@ static inline void set_fs(mm_segment_t fs)
|
|||
* error occurs, and leave it unchanged on success. Note that these
|
||||
* versions are void (ie, don't return a value as such).
|
||||
*/
|
||||
#define __get_user(x,ptr) \
|
||||
#define __get_user(x, ptr) \
|
||||
({ \
|
||||
long __gu_err = 0; \
|
||||
__get_user_err((x),(ptr),__gu_err); \
|
||||
__get_user_err((x), (ptr), __gu_err); \
|
||||
__gu_err; \
|
||||
})
|
||||
|
||||
#define __get_user_error(x,ptr,err) \
|
||||
#define __get_user_error(x, ptr, err) \
|
||||
({ \
|
||||
__get_user_err((x),(ptr),err); \
|
||||
__get_user_err((x), (ptr), err); \
|
||||
(void) 0; \
|
||||
})
|
||||
|
||||
#define __get_user_err(x,ptr,err) \
|
||||
#define __get_user_err(x, ptr, err) \
|
||||
do { \
|
||||
unsigned long __gu_addr = (unsigned long)(ptr); \
|
||||
unsigned long __gu_val; \
|
||||
__chk_user_ptr(ptr); \
|
||||
might_fault(); \
|
||||
switch (sizeof(*(ptr))) { \
|
||||
case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
|
||||
case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
|
||||
case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \
|
||||
case 1: __get_user_asm_byte(__gu_val, __gu_addr, err); break; \
|
||||
case 2: __get_user_asm_half(__gu_val, __gu_addr, err); break; \
|
||||
case 4: __get_user_asm_word(__gu_val, __gu_addr, err); break; \
|
||||
default: (__gu_val) = __get_user_bad(); \
|
||||
} \
|
||||
(x) = (__typeof__(*(ptr)))__gu_val; \
|
||||
} while (0)
|
||||
|
||||
#define __get_user_asm_byte(x,addr,err) \
|
||||
#define __get_user_asm_byte(x, addr, err) \
|
||||
__asm__ __volatile__( \
|
||||
"1: " TUSER(ldrb) " %1,[%2],#0\n" \
|
||||
"2:\n" \
|
||||
|
|
@ -330,7 +330,7 @@ do { \
|
|||
: "cc")
|
||||
|
||||
#ifndef __ARMEB__
|
||||
#define __get_user_asm_half(x,__gu_addr,err) \
|
||||
#define __get_user_asm_half(x, __gu_addr, err) \
|
||||
({ \
|
||||
unsigned long __b1, __b2; \
|
||||
__get_user_asm_byte(__b1, __gu_addr, err); \
|
||||
|
|
@ -338,7 +338,7 @@ do { \
|
|||
(x) = __b1 | (__b2 << 8); \
|
||||
})
|
||||
#else
|
||||
#define __get_user_asm_half(x,__gu_addr,err) \
|
||||
#define __get_user_asm_half(x, __gu_addr, err) \
|
||||
({ \
|
||||
unsigned long __b1, __b2; \
|
||||
__get_user_asm_byte(__b1, __gu_addr, err); \
|
||||
|
|
@ -347,7 +347,7 @@ do { \
|
|||
})
|
||||
#endif
|
||||
|
||||
#define __get_user_asm_word(x,addr,err) \
|
||||
#define __get_user_asm_word(x, addr, err) \
|
||||
__asm__ __volatile__( \
|
||||
"1: " TUSER(ldr) " %1,[%2],#0\n" \
|
||||
"2:\n" \
|
||||
|
|
@ -365,35 +365,35 @@ do { \
|
|||
: "r" (addr), "i" (-EFAULT) \
|
||||
: "cc")
|
||||
|
||||
#define __put_user(x,ptr) \
|
||||
#define __put_user(x, ptr) \
|
||||
({ \
|
||||
long __pu_err = 0; \
|
||||
__put_user_err((x),(ptr),__pu_err); \
|
||||
__put_user_err((x), (ptr), __pu_err); \
|
||||
__pu_err; \
|
||||
})
|
||||
|
||||
#define __put_user_error(x,ptr,err) \
|
||||
#define __put_user_error(x, ptr, err) \
|
||||
({ \
|
||||
__put_user_err((x),(ptr),err); \
|
||||
__put_user_err((x), (ptr), err); \
|
||||
(void) 0; \
|
||||
})
|
||||
|
||||
#define __put_user_err(x,ptr,err) \
|
||||
#define __put_user_err(x, ptr, err) \
|
||||
do { \
|
||||
unsigned long __pu_addr = (unsigned long)(ptr); \
|
||||
__typeof__(*(ptr)) __pu_val = (x); \
|
||||
__chk_user_ptr(ptr); \
|
||||
might_fault(); \
|
||||
switch (sizeof(*(ptr))) { \
|
||||
case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
|
||||
case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
|
||||
case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \
|
||||
case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \
|
||||
case 1: __put_user_asm_byte(__pu_val, __pu_addr, err); break; \
|
||||
case 2: __put_user_asm_half(__pu_val, __pu_addr, err); break; \
|
||||
case 4: __put_user_asm_word(__pu_val, __pu_addr, err); break; \
|
||||
case 8: __put_user_asm_dword(__pu_val, __pu_addr, err); break; \
|
||||
default: __put_user_bad(); \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
#define __put_user_asm_byte(x,__pu_addr,err) \
|
||||
#define __put_user_asm_byte(x, __pu_addr, err) \
|
||||
__asm__ __volatile__( \
|
||||
"1: " TUSER(strb) " %1,[%2],#0\n" \
|
||||
"2:\n" \
|
||||
|
|
@ -411,22 +411,22 @@ do { \
|
|||
: "cc")
|
||||
|
||||
#ifndef __ARMEB__
|
||||
#define __put_user_asm_half(x,__pu_addr,err) \
|
||||
#define __put_user_asm_half(x, __pu_addr, err) \
|
||||
({ \
|
||||
unsigned long __temp = (unsigned long)(x); \
|
||||
unsigned long __temp = (__force unsigned long)(x); \
|
||||
__put_user_asm_byte(__temp, __pu_addr, err); \
|
||||
__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \
|
||||
})
|
||||
#else
|
||||
#define __put_user_asm_half(x,__pu_addr,err) \
|
||||
#define __put_user_asm_half(x, __pu_addr, err) \
|
||||
({ \
|
||||
unsigned long __temp = (unsigned long)(x); \
|
||||
unsigned long __temp = (__force unsigned long)(x); \
|
||||
__put_user_asm_byte(__temp >> 8, __pu_addr, err); \
|
||||
__put_user_asm_byte(__temp, __pu_addr + 1, err); \
|
||||
})
|
||||
#endif
|
||||
|
||||
#define __put_user_asm_word(x,__pu_addr,err) \
|
||||
#define __put_user_asm_word(x, __pu_addr, err) \
|
||||
__asm__ __volatile__( \
|
||||
"1: " TUSER(str) " %1,[%2],#0\n" \
|
||||
"2:\n" \
|
||||
|
|
@ -451,7 +451,7 @@ do { \
|
|||
#define __reg_oper1 "%R2"
|
||||
#endif
|
||||
|
||||
#define __put_user_asm_dword(x,__pu_addr,err) \
|
||||
#define __put_user_asm_dword(x, __pu_addr, err) \
|
||||
__asm__ __volatile__( \
|
||||
ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \
|
||||
ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \
|
||||
|
|
@ -480,9 +480,9 @@ extern unsigned long __must_check __copy_to_user_std(void __user *to, const void
|
|||
extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
|
||||
extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
|
||||
#else
|
||||
#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0)
|
||||
#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0)
|
||||
#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
|
||||
#define __copy_from_user(to, from, n) (memcpy(to, (void __force *)from, n), 0)
|
||||
#define __copy_to_user(to, from, n) (memcpy((void __force *)to, from, n), 0)
|
||||
#define __clear_user(addr, n) (memset((void __force *)addr, 0, n), 0)
|
||||
#endif
|
||||
|
||||
static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
|
||||
|
|
|
|||
|
|
@ -231,7 +231,7 @@ static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
|
|||
/*
|
||||
* PMU platform driver and devicetree bindings.
|
||||
*/
|
||||
static struct of_device_id cpu_pmu_of_device_ids[] = {
|
||||
static const struct of_device_id cpu_pmu_of_device_ids[] = {
|
||||
{.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init},
|
||||
{.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init},
|
||||
{.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init},
|
||||
|
|
|
|||
|
|
@ -2,5 +2,7 @@ config MACH_ASM9260
|
|||
bool "Alphascale ASM9260"
|
||||
depends on ARCH_MULTI_V5
|
||||
select CPU_ARM926T
|
||||
select ASM9260_TIMER
|
||||
select GENERIC_CLOCKEVENTS
|
||||
help
|
||||
Support for Alphascale ASM9260 based platform.
|
||||
|
|
|
|||
|
|
@ -64,7 +64,6 @@ config SOC_SAMA5D4
|
|||
select SOC_SAMA5
|
||||
select CLKSRC_MMIO
|
||||
select CACHE_L2X0
|
||||
select CACHE_PL310
|
||||
select HAVE_FB_ATMEL
|
||||
select HAVE_AT91_UTMI
|
||||
select HAVE_AT91_SMD
|
||||
|
|
|
|||
|
|
@ -183,7 +183,7 @@ static struct clock_event_device clkevt = {
|
|||
void __iomem *at91_st_base;
|
||||
EXPORT_SYMBOL_GPL(at91_st_base);
|
||||
|
||||
static struct of_device_id at91rm9200_st_timer_ids[] = {
|
||||
static const struct of_device_id at91rm9200_st_timer_ids[] = {
|
||||
{ .compatible = "atmel,at91rm9200-st" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
|
|
|||
|
|
@ -35,10 +35,10 @@ extern void __init at91sam9260_pm_init(void);
|
|||
extern void __init at91sam9g45_pm_init(void);
|
||||
extern void __init at91sam9x5_pm_init(void);
|
||||
#else
|
||||
void __init at91rm9200_pm_init(void) { }
|
||||
void __init at91sam9260_pm_init(void) { }
|
||||
void __init at91sam9g45_pm_init(void) { }
|
||||
void __init at91sam9x5_pm_init(void) { }
|
||||
static inline void __init at91rm9200_pm_init(void) { }
|
||||
static inline void __init at91sam9260_pm_init(void) { }
|
||||
static inline void __init at91sam9g45_pm_init(void) { }
|
||||
static inline void __init at91sam9x5_pm_init(void) { }
|
||||
#endif
|
||||
|
||||
#endif /* _AT91_GENERIC_H */
|
||||
|
|
|
|||
|
|
@ -226,7 +226,7 @@ void at91_pm_set_standby(void (*at91_standby)(void))
|
|||
}
|
||||
}
|
||||
|
||||
static struct of_device_id ramc_ids[] = {
|
||||
static const struct of_device_id ramc_ids[] __initconst = {
|
||||
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
|
||||
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
|
||||
{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
|
||||
|
|
@ -234,7 +234,7 @@ static struct of_device_id ramc_ids[] = {
|
|||
{ /*sentinel*/ }
|
||||
};
|
||||
|
||||
static void at91_dt_ramc(void)
|
||||
static __init void at91_dt_ramc(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
const struct of_device_id *of_id;
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
static const char *axxia_dt_match[] __initconst = {
|
||||
static const char *const axxia_dt_match[] __initconst = {
|
||||
"lsi,axm5516",
|
||||
"lsi,axm5516-sim",
|
||||
"lsi,axm5516-emu",
|
||||
|
|
|
|||
|
|
@ -68,7 +68,7 @@ config ARCH_BCM_MOBILE
|
|||
This enables support for systems based on Broadcom mobile SoCs.
|
||||
|
||||
config ARCH_BCM_281XX
|
||||
bool "Broadcom BCM281XX SoC family"
|
||||
bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7
|
||||
select ARCH_BCM_MOBILE
|
||||
select HAVE_SMP
|
||||
help
|
||||
|
|
@ -77,7 +77,7 @@ config ARCH_BCM_281XX
|
|||
variants.
|
||||
|
||||
config ARCH_BCM_21664
|
||||
bool "Broadcom BCM21664 SoC family"
|
||||
bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7
|
||||
select ARCH_BCM_MOBILE
|
||||
select HAVE_SMP
|
||||
help
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@
|
|||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
static const char *brcmstb_match[] __initconst = {
|
||||
static const char *const brcmstb_match[] __initconst = {
|
||||
"brcm,bcm7445",
|
||||
"brcm,brcmstb",
|
||||
NULL
|
||||
|
|
|
|||
|
|
@ -32,12 +32,14 @@ config ARCH_DAVINCI_DM646x
|
|||
|
||||
config ARCH_DAVINCI_DA830
|
||||
bool "DA830/OMAP-L137/AM17x based system"
|
||||
depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
|
||||
select ARCH_DAVINCI_DA8XX
|
||||
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
|
||||
select CP_INTC
|
||||
|
||||
config ARCH_DAVINCI_DA850
|
||||
bool "DA850/OMAP-L138/AM18x based system"
|
||||
depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
|
||||
select ARCH_DAVINCI_DA8XX
|
||||
select CP_INTC
|
||||
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
|
||||
#define DA8XX_NUM_UARTS 3
|
||||
|
||||
static struct of_device_id da8xx_irq_match[] __initdata = {
|
||||
static const struct of_device_id da8xx_irq_match[] __initconst = {
|
||||
{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
|
||||
{ }
|
||||
};
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ static void __iomem *pinmux_base;
|
|||
/*
|
||||
* Sets the DAVINCI MUX register based on the table
|
||||
*/
|
||||
int __init_or_module davinci_cfg_reg(const unsigned long index)
|
||||
int davinci_cfg_reg(const unsigned long index)
|
||||
{
|
||||
static DEFINE_SPINLOCK(mux_spin_lock);
|
||||
struct davinci_soc_info *soc_info = &davinci_soc_info;
|
||||
|
|
@ -101,7 +101,7 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
|
|||
}
|
||||
EXPORT_SYMBOL(davinci_cfg_reg);
|
||||
|
||||
int __init_or_module davinci_cfg_reg_list(const short pins[])
|
||||
int davinci_cfg_reg_list(const short pins[])
|
||||
{
|
||||
int i, error = -EINVAL;
|
||||
|
||||
|
|
|
|||
|
|
@ -227,7 +227,7 @@ static void __init exynos_dt_machine_init(void)
|
|||
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
|
||||
}
|
||||
|
||||
static char const *exynos_dt_compat[] __initconst = {
|
||||
static char const *const exynos_dt_compat[] __initconst = {
|
||||
"samsung,exynos3",
|
||||
"samsung,exynos3250",
|
||||
"samsung,exynos4",
|
||||
|
|
|
|||
|
|
@ -587,7 +587,7 @@ static struct exynos_pm_data exynos5420_pm_data = {
|
|||
.cpu_suspend = exynos5420_cpu_suspend,
|
||||
};
|
||||
|
||||
static struct of_device_id exynos_pmu_of_device_ids[] = {
|
||||
static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
|
||||
{
|
||||
.compatible = "samsung,exynos3250-pmu",
|
||||
.data = &exynos3250_pm_data,
|
||||
|
|
|
|||
|
|
@ -169,7 +169,7 @@ static void __init highbank_init(void)
|
|||
platform_device_register(&highbank_cpuidle_device);
|
||||
}
|
||||
|
||||
static const char *highbank_match[] __initconst = {
|
||||
static const char *const highbank_match[] __initconst = {
|
||||
"calxeda,highbank",
|
||||
"calxeda,ecx-2000",
|
||||
NULL,
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ static void __init hi3620_map_io(void)
|
|||
iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
|
||||
}
|
||||
|
||||
static const char *hi3xxx_compat[] __initconst = {
|
||||
static const char *const hi3xxx_compat[] __initconst = {
|
||||
"hisilicon,hi3620-hi4511",
|
||||
NULL,
|
||||
};
|
||||
|
|
@ -55,7 +55,7 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
|
|||
.dt_compat = hi3xxx_compat,
|
||||
MACHINE_END
|
||||
|
||||
static const char *hix5hd2_compat[] __initconst = {
|
||||
static const char *const hix5hd2_compat[] __initconst = {
|
||||
"hisilicon,hix5hd2",
|
||||
NULL,
|
||||
};
|
||||
|
|
@ -64,7 +64,7 @@ DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
|
|||
.dt_compat = hix5hd2_compat,
|
||||
MACHINE_END
|
||||
|
||||
static const char *hip04_compat[] __initconst = {
|
||||
static const char *const hip04_compat[] __initconst = {
|
||||
"hisilicon,hip04-d01",
|
||||
NULL,
|
||||
};
|
||||
|
|
@ -73,7 +73,7 @@ DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
|
|||
.dt_compat = hip04_compat,
|
||||
MACHINE_END
|
||||
|
||||
static const char *hip01_compat[] __initconst = {
|
||||
static const char *const hip01_compat[] __initconst = {
|
||||
"hisilicon,hip01",
|
||||
"hisilicon,hip01-ca9x2",
|
||||
NULL,
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue