USB: ohci-nxp: Use isp1301 driver
ohci-nxp duplicates the isp1301 driver. This patch removes this code and makes ohci-nxp use the new separate isp1301 driver instead. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
24a28e4283
commit
73108aa90c
|
@ -5,12 +5,20 @@ Required properties:
|
|||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
- interrupts: The OHCI interrupt
|
||||
- transceiver: phandle of the associated ISP1301 device - this is necessary for
|
||||
the UDC controller for connecting to the USB physical layer
|
||||
|
||||
Example (LPC32xx):
|
||||
|
||||
isp1301: usb-transceiver@2c {
|
||||
compatible = "nxp,isp1301";
|
||||
reg = <0x2c>;
|
||||
};
|
||||
|
||||
ohci@31020000 {
|
||||
compatible = "nxp,ohci-nxp";
|
||||
reg = <0x31020000 0x300>;
|
||||
interrupt-parent = <&mic>;
|
||||
interrupts = <0x3b 0>;
|
||||
transceiver = <&isp1301>;
|
||||
};
|
||||
|
|
|
@ -292,6 +292,7 @@ config USB_OHCI_HCD
|
|||
depends on USB && USB_ARCH_HAS_OHCI
|
||||
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
|
||||
select USB_OTG_UTILS if ARCH_OMAP
|
||||
select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008
|
||||
---help---
|
||||
The Open Host Controller Interface (OHCI) is a standard for accessing
|
||||
USB 1.1 host controller hardware. It does more in hardware than Intel's
|
||||
|
|
|
@ -23,6 +23,7 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/usb/isp1301.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
@ -58,54 +59,6 @@
|
|||
#define TRANSPARENT_I2C_EN (1 << 7)
|
||||
#define HOST_EN (1 << 0)
|
||||
|
||||
/* ISP1301 USB transceiver I2C registers */
|
||||
#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
|
||||
|
||||
#define MC1_SPEED_REG (1 << 0)
|
||||
#define MC1_SUSPEND_REG (1 << 1)
|
||||
#define MC1_DAT_SE0 (1 << 2)
|
||||
#define MC1_TRANSPARENT (1 << 3)
|
||||
#define MC1_BDIS_ACON_EN (1 << 4)
|
||||
#define MC1_OE_INT_EN (1 << 5)
|
||||
#define MC1_UART_EN (1 << 6)
|
||||
#define MC1_MASK 0x7f
|
||||
|
||||
#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
|
||||
|
||||
#define MC2_GLOBAL_PWR_DN (1 << 0)
|
||||
#define MC2_SPD_SUSP_CTRL (1 << 1)
|
||||
#define MC2_BI_DI (1 << 2)
|
||||
#define MC2_TRANSP_BDIR0 (1 << 3)
|
||||
#define MC2_TRANSP_BDIR1 (1 << 4)
|
||||
#define MC2_AUDIO_EN (1 << 5)
|
||||
#define MC2_PSW_EN (1 << 6)
|
||||
#define MC2_EN2V7 (1 << 7)
|
||||
|
||||
#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
|
||||
# define OTG1_DP_PULLUP (1 << 0)
|
||||
# define OTG1_DM_PULLUP (1 << 1)
|
||||
# define OTG1_DP_PULLDOWN (1 << 2)
|
||||
# define OTG1_DM_PULLDOWN (1 << 3)
|
||||
# define OTG1_ID_PULLDOWN (1 << 4)
|
||||
# define OTG1_VBUS_DRV (1 << 5)
|
||||
# define OTG1_VBUS_DISCHRG (1 << 6)
|
||||
# define OTG1_VBUS_CHRG (1 << 7)
|
||||
#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
|
||||
# define OTG_B_SESS_END (1 << 6)
|
||||
# define OTG_B_SESS_VLD (1 << 7)
|
||||
|
||||
#define ISP1301_I2C_ADDR 0x2C
|
||||
|
||||
#define ISP1301_I2C_MODE_CONTROL_1 0x4
|
||||
#define ISP1301_I2C_MODE_CONTROL_2 0x12
|
||||
#define ISP1301_I2C_OTG_CONTROL_1 0x6
|
||||
#define ISP1301_I2C_OTG_CONTROL_2 0x10
|
||||
#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
|
||||
#define ISP1301_I2C_INTERRUPT_LATCH 0xA
|
||||
#define ISP1301_I2C_INTERRUPT_FALLING 0xC
|
||||
#define ISP1301_I2C_INTERRUPT_RISING 0xE
|
||||
#define ISP1301_I2C_REG_CLEAR_ADDR 1
|
||||
|
||||
/* On LPC32xx, those are undefined */
|
||||
#ifndef start_int_set_falling_edge
|
||||
#define start_int_set_falling_edge(irq)
|
||||
|
@ -115,41 +68,12 @@
|
|||
#define start_int_umask(irq)
|
||||
#endif
|
||||
|
||||
static struct i2c_driver isp1301_driver;
|
||||
static struct i2c_client *isp1301_i2c_client;
|
||||
|
||||
extern int usb_disabled(void);
|
||||
|
||||
static struct clk *usb_clk;
|
||||
|
||||
static const unsigned short normal_i2c[] =
|
||||
{ ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
|
||||
|
||||
static int isp1301_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int isp1301_remove(struct i2c_client *client)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id isp1301_id[] = {
|
||||
{ "isp1301_nxp", 0 },
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct i2c_driver isp1301_driver = {
|
||||
.driver = {
|
||||
.name = "isp1301_nxp",
|
||||
},
|
||||
.probe = isp1301_probe,
|
||||
.remove = isp1301_remove,
|
||||
.id_table = isp1301_id,
|
||||
};
|
||||
|
||||
static void isp1301_configure_pnx4008(void)
|
||||
{
|
||||
/* PNX4008 only supports DAT_SE0 USB mode */
|
||||
|
@ -373,11 +297,22 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
|
|||
struct usb_hcd *hcd = 0;
|
||||
struct ohci_hcd *ohci;
|
||||
const struct hc_driver *driver = &ohci_nxp_hc_driver;
|
||||
struct i2c_adapter *i2c_adap;
|
||||
struct i2c_board_info i2c_info;
|
||||
struct resource *res;
|
||||
|
||||
int ret = 0, irq;
|
||||
struct device_node *isp1301_node;
|
||||
|
||||
if (pdev->dev.of_node) {
|
||||
isp1301_node = of_parse_phandle(pdev->dev.of_node,
|
||||
"transceiver", 0);
|
||||
} else {
|
||||
isp1301_node = NULL;
|
||||
}
|
||||
|
||||
isp1301_i2c_client = isp1301_get_client(isp1301_node);
|
||||
if (!isp1301_i2c_client) {
|
||||
ret = -EPROBE_DEFER;
|
||||
goto out;
|
||||
}
|
||||
|
||||
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
|
||||
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
|
||||
|
@ -392,28 +327,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
|
|||
/* Enable AHB slave USB clock, needed for further USB clock control */
|
||||
__raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
|
||||
|
||||
ret = i2c_add_driver(&isp1301_driver);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "failed to add ISP1301 driver\n");
|
||||
goto out;
|
||||
}
|
||||
i2c_adap = i2c_get_adapter(2);
|
||||
if (!i2c_adap) {
|
||||
dev_err(&pdev->dev, "failed on i2c_get_adapter");
|
||||
goto out_i2c_driver;
|
||||
}
|
||||
|
||||
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
|
||||
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
|
||||
normal_i2c, NULL);
|
||||
i2c_put_adapter(i2c_adap);
|
||||
if (!isp1301_i2c_client) {
|
||||
dev_err(&pdev->dev, "failed to connect I2C to ISP1301 USB Transceiver\n");
|
||||
ret = -ENODEV;
|
||||
goto out_i2c_driver;
|
||||
}
|
||||
|
||||
isp1301_configure();
|
||||
|
||||
/* Enable USB PLL */
|
||||
|
@ -495,10 +408,7 @@ out3:
|
|||
out2:
|
||||
clk_put(usb_clk);
|
||||
out1:
|
||||
i2c_unregister_device(isp1301_i2c_client);
|
||||
isp1301_i2c_client = NULL;
|
||||
out_i2c_driver:
|
||||
i2c_del_driver(&isp1301_driver);
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
@ -516,7 +426,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev)
|
|||
clk_put(usb_clk);
|
||||
i2c_unregister_device(isp1301_i2c_client);
|
||||
isp1301_i2c_client = NULL;
|
||||
i2c_del_driver(&isp1301_driver);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
|
|
Loading…
Reference in a new issue