powerpc/85xx: Add P1023RDB board support
P1023RDB Specification: ----------------------- Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flash Ethernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHY PCIe: Three mini-PCIe slots USB: Two USB2.0 Type A ports I2C: AT24C08 8K Board EEPROM (8 bit address) Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>wifi-calibration
Chunhe Lan
Scott Wood
parent
b9b5350b82
commit
75898156bc
|
|
@ -0,0 +1,234 @@
|
|||
/*
|
||||
* P1023 RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2013 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Author: Chunhe Lan <Chunhe.Lan@freescale.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p1023si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P1023";
|
||||
compatible = "fsl,P1023RDB";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
soc: soc@ff600000 {
|
||||
ranges = <0x0 0x0 0xff600000 0x200000>;
|
||||
|
||||
i2c@3000 {
|
||||
eeprom@53 {
|
||||
compatible = "at24,24c04";
|
||||
reg = <0x53>;
|
||||
};
|
||||
|
||||
rtc@6f {
|
||||
compatible = "microchip,mcp7941x";
|
||||
reg = <0x6f>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
dr_mode = "host";
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
};
|
||||
|
||||
lbc: localbus@ff605000 {
|
||||
reg = <0 0xff605000 0 0x1000>;
|
||||
|
||||
/* NOR, NAND Flashes */
|
||||
ranges = <0x0 0x0 0x0 0xec000000 0x04000000
|
||||
0x1 0x0 0x0 0xffa00000 0x08000000>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x04000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
/* 48MB for Root File System */
|
||||
reg = <0x00000000 0x03000000>;
|
||||
label = "NOR Root File System";
|
||||
};
|
||||
|
||||
partition@3000000 {
|
||||
/* 1MB for DTB Image */
|
||||
reg = <0x03000000 0x00100000>;
|
||||
label = "NOR DTB Image";
|
||||
};
|
||||
|
||||
partition@3100000 {
|
||||
/* 14MB for Linux Kernel Image */
|
||||
reg = <0x03100000 0x00e00000>;
|
||||
label = "NOR Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@3f00000 {
|
||||
/* This location must not be altered */
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
/* 512KB for u-boot Environment Variables */
|
||||
reg = <0x03f00000 0x00100000>;
|
||||
label = "NOR U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x1 0x0 0x40000>;
|
||||
|
||||
partition@0 {
|
||||
/* This location must not be altered */
|
||||
/* 1MB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "NAND U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 1MB for DTB Image */
|
||||
reg = <0x00100000 0x00100000>;
|
||||
label = "NAND DTB Image";
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
/* 14MB for Linux Kernel Image */
|
||||
reg = <0x00200000 0x00e00000>;
|
||||
label = "NAND Linux Kernel Image";
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
/* 96MB for Root File System Image */
|
||||
reg = <0x01000000 0x06000000>;
|
||||
label = "NAND Root File System";
|
||||
};
|
||||
|
||||
partition@7000000 {
|
||||
/* 16MB for User Writable Area */
|
||||
reg = <0x07000000 0x01000000>;
|
||||
label = "NAND Writable User area";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ff60a000 {
|
||||
reg = <0 0xff60a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
/* IRQ[0:3] are pulled up on board, set to active-low */
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 0 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
ranges = <0x2000000 0x0 0xc0000000
|
||||
0x2000000 0x0 0xc0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
board_pci1: pci1: pcie@ff609000 {
|
||||
reg = <0 0xff609000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
/*
|
||||
* IRQ[4:6] only for PCIe, set to active-high,
|
||||
* IRQ[7] is pulled up on board, set to active-low
|
||||
*/
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 4 2 0 0
|
||||
0000 0 0 2 &mpic 5 2 0 0
|
||||
0000 0 0 3 &mpic 6 2 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ff60b000 {
|
||||
reg = <0 0xff60b000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
/*
|
||||
* IRQ[8:10] are pulled up on board, set to active-low
|
||||
* IRQ[11] only for PCIe, set to active-high,
|
||||
*/
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 8 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 2 0 0
|
||||
>;
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
/include/ "fsl/p1023si-post.dtsi"
|
||||
|
|
@ -1,14 +1,13 @@
|
|||
CONFIG_PPC_85xx=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_NR_CPUS=2
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_IRQ_DOMAIN_DEBUG=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_RCU_FANOUT=32
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
|
|
@ -22,6 +21,8 @@ CONFIG_MODVERSIONS=y
|
|||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_PHYSICAL_START=0x00000000
|
||||
CONFIG_P1023_RDB=y
|
||||
CONFIG_P1023_RDS=y
|
||||
CONFIG_QUICC_ENGINE=y
|
||||
CONFIG_QE_GPIO=y
|
||||
|
|
@ -64,10 +65,20 @@ CONFIG_IP_SCTP=m
|
|||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=131072
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_LEGACY=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_ST=y
|
||||
|
|
@ -83,6 +94,8 @@ CONFIG_DUMMY=y
|
|||
CONFIG_FS_ENET=y
|
||||
CONFIG_FSL_PQ_MDIO=y
|
||||
CONFIG_E1000E=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_DAVICOM_PHY=y
|
||||
CONFIG_CICADA_PHY=y
|
||||
|
|
@ -97,12 +110,15 @@ CONFIG_SERIAL_8250=y
|
|||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=2
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_MANY_PORTS=y
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_8250_DETECT_IRQ=y
|
||||
CONFIG_SERIAL_8250_RSA=y
|
||||
CONFIG_SERIAL_QE=m
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_NVRAM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_CPM=m
|
||||
CONFIG_I2C_MPC=y
|
||||
CONFIG_GPIO_MPC8XXX=y
|
||||
|
|
@ -122,6 +138,7 @@ CONFIG_USB_STORAGE=y
|
|||
CONFIG_EDAC=y
|
||||
CONFIG_EDAC_MM_EDAC=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_CMOS=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_FSL_DMA=y
|
||||
|
|
@ -162,6 +179,7 @@ CONFIG_DEBUG_FS=y
|
|||
CONFIG_DETECT_HUNG_TASK=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_STRICT_DEVMEM=y
|
||||
CONFIG_CRYPTO_PCBC=m
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_SHA512=y
|
||||
|
|
@ -112,10 +112,10 @@ config P1022_RDK
|
|||
reference board.
|
||||
|
||||
config P1023_RDS
|
||||
bool "Freescale P1023 RDS"
|
||||
bool "Freescale P1023 RDS/RDB"
|
||||
select DEFAULT_UIMAGE
|
||||
help
|
||||
This option enables support for the P1023 RDS board
|
||||
This option enables support for the P1023 RDS and RDB boards
|
||||
|
||||
config SOCRATES
|
||||
bool "Socrates"
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
||||
* Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Roy Zang <tie-fei.zang@freescale.com>
|
||||
*
|
||||
|
|
@ -86,6 +86,7 @@ static void __init mpc85xx_rds_setup_arch(void)
|
|||
}
|
||||
|
||||
machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
|
||||
|
||||
static void __init mpc85xx_rds_pic_init(void)
|
||||
{
|
||||
|
|
@ -106,6 +107,14 @@ static int __init p1023_rds_probe(void)
|
|||
|
||||
}
|
||||
|
||||
static int __init p1023_rdb_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
return of_flat_dt_is_compatible(root, "fsl,P1023RDB");
|
||||
|
||||
}
|
||||
|
||||
define_machine(p1023_rds) {
|
||||
.name = "P1023 RDS",
|
||||
.probe = p1023_rds_probe,
|
||||
|
|
@ -120,3 +129,16 @@ define_machine(p1023_rds) {
|
|||
#endif
|
||||
};
|
||||
|
||||
define_machine(p1023_rdb) {
|
||||
.name = "P1023 RDB",
|
||||
.probe = p1023_rdb_probe,
|
||||
.setup_arch = mpc85xx_rds_setup_arch,
|
||||
.init_IRQ = mpc85xx_rds_pic_init,
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue